This patch moves the gdb/gnulib subdirectory to the top level.
It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this. However, gdbserver still builds its own
copy of gnulib, just from the new source location.
A small hack was needed to ensure that gnulib is only built when gdb
is enabled. The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.
Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.
Tested by the buildbot.
ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* MAINTAINERS: Add gnulib.
* gnulib: New directory, move from gdb/gnulib.
* configure.ac (host_libs): Add gnulib.
* configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gnulib.
* Makefile.in: Rebuild.
gdb/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* gnulib: Move directory to top-level.
* configure.ac: Don't configure gnulib.
* configure: Rebuild.
* common/common-defs.h: Use new path to gnulib.
* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
(GNULIB_H): Remove.
(INCGNU): Look in new gnulib location.
(HFILES_NO_SRCDIR): Remove gnulib files.
(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
(generated_files): Remove GNULIB_H.
($(LIBGNU), all-lib): Remove targets.
(distclean): Don't mention GNULIB_BUILDDIR.
($(GNULIB_BUILDDIR)/Makefile): Remove target.
gdb/gdbserver/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* configure.ac: Use new path to gnulib.
* configure: Rebuild.
* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
to gnulib.
gnulib/ChangeLog
2019-06-14 Tom Tromey <tom@tromey.com>
* update-gnulib.sh: Adjust paths.
* Makefile.in: Adjust paths.
* configure.ac: Adjust paths. Use ACX_LARGEFILE.
* configure: Rebuild.
Revert:
binutls 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
top 2019-05-29 Nick Clifton <nickc@redhat.com>
* configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
top * Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
top * configure.ac (noconfigdirs): Add libctf if the target does not use
the ELF file format.
* configure: Regenerate.
binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based
targets.
(HAVE_LIBCTF): Define if libctf support is available.
* Makefile.am (LIBCTF): Set value to @LIBCTF@.
* objdump.c: Make CTF code conditional upon HAVE_LIBCTF being
defined.
* readelf.c: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
* config.in: Regenerate.
This ties libctf into the build system, and makes binutils depend on it
(used by the next commits).
* Makefile.def (host_modules): Add libctf.
* Makefile.def (dependencies): Likewise.
libctf depends on zlib, libiberty, and bfd.
* Makefile.in: Regenerated.
* configure.ac (host_libs): Add libctf.
* configure: Regenerated.
libctf/
* Makefile.am: New.
* Makefile.in: Regenerated.
* config.h.in: Likewise.
* aclocal.m4: Likewise.
* configure: Likewise.
https://sourceware.org/bugzilla/show_bug.cgi?id=18632
The bundled libreadline is always built, even if the system is
./configure'd --with-system-readline and the build libreadline.a is not
used.
Proposed patch:
Fix ./configure.ac not to proceed readline/, when --with-system-
readline is provided
This patch turns dependencies of non-bootstrap targets on bootstrap
targets for bootstrap builds into dependencies on stage_last. This
arrangement gets stage1-bubble to run from stage_last if we haven't
started a bootstrap yet, and to use the current stage otherwise. This
was already the case of target libs, just not of non-bootstrapped host
modules.
In order to retain preexisting dependencies in non-bootstrap builds,
or in gcc-less builds, this introduces support for @unless/@endunless
pairs in Makefile.in.
There is a remaining possibility of problem if activating, in a tree
configured for bootstrap, a parallel build of two or more modules, at
least one bootstrapped and one not. In this case, make might decide
to build stage_current and stage_last in parallel, the latter will
start a submake to build stage1 while the initial make, having
satisfied stage_current, proceeds to build the bootstrapped module in
non-bootstrapped configurations. The two builds will overlap and will
likely conflict. This situation does NOT arise in normal settings,
however: a post-bootstrap build of all-host all-target will indeed
activate such targets concurrently, but only after building all
bootstrapped modules successfully, and it will have both stage_last
and stage_current targets already satisfied, so the potential race
between builds will not arise.
Another remaining problem, that is slightly expanded with this patch,
is that of an interrupted build in a tree configured for bootstrap,
continued with a non-bootstrapped target. Target modules that were
not bootstrapped would already fail to complete the current stage when
activated explicitly in the command line for a retry; host modules,
however, would attempt to build their bootstrapped dependencies, which
is what led to the problem of concurrent builds addressed with this
patch. An interrupted or failed build might still recover correctly,
if the non-bootstrapped target is activated in both builds, because
then make will remove stage_last when its build command is
interrupted, so that it will attempt to recreate it with stage1-bubble
in the second try. A bootstrap build, however, will not be attempting
to build stage_last, so the file will remain and the retry won't go
through stage1-bubble. We have lived with that for target modules, so
we can probably live with that for host modules too.
Another undesirable consequence of this change is that non-boostrapped
host modules, in a tree configured for bootstrap, when activated as
make all-<module>, will build all of stage1 instead of only the
module's usual dependencies. This is intentional and necessary to fix
the parallel-build problem. If it's not desirable, disabling the
unnecessary bootstrap configuration will suffice to restore the
original set of dependencies.
for ChangeLog
* configure.ac: Introduce support for @unless/@endunless.
* Makefile.tpl (dep-kind): Rewrite with cond; return
postbootstrap in some cases.
(make-postboot-dep, postboot-targets): New.
(dependencies): Do not output postbootstrap dependencies at
first. Output non-target ones changed for configure to depend
on stage_last @if gcc-bootstrap, and the original deps @unless
gcc-bootstrap.
* configure.in, Makefile.in: Rebuilt.
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
Here's an extra one... I'll need to make some changes to the root
configure.ac. This patch makes sure it is in sync with GCC first.
ChangeLog:
* configure.ac: Sync with GCC, remove MPX-related things.
Remove an LD subdirectory configuration error:
*** ld does not support target wasm32-unknown-none
*** see ld/configure.tgt for supported targets
make[1]: *** [configure-ld] Error 1
which prevents binutils for the WebAssembly target from being built
unless an explicit `--disable-ld' configuration option has been given.
Users must not have to disable features selected by default to get a
working configuration.
/
* configure.ac <wasm32-*-*> (noconfigdirs): Add `ld'.
* configure: Regenerate.
. * config-ml.in: Sync with gcc sources.
* config.guess: Likewise.
* config.sub: Likewise.
* configure.ac: Likewise.
* configure: Regenerate.
config * Sync with GCC sources:
2017-11-14 Boris Kolpackov <boris@codesynthesis.com>
* gcc-plugin.m4: Add support for MinGW.
2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
* cet.m4: New file.
2017-11-15 Alexandre Oliva <aoliva@redhat.com>
* bootstrap-debug-lean.mk (do-compare): Use the
contrib/compare-debug script.
2017-10-24 H.J. Lu <hongjiu.lu@intel.com>
* bootstrap-cet.mk: New file.
2017-06-19 Martin Liska <mliska@suse.cz>
* bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages.
* bootstrap-lto.mk: Likewise.
2017-06-03 Eric Botcazou <ebotcazou@adacore.com>
* mt-android: New file.
2017-02-13 Richard Biener <rguenther@suse.de>
* isl.m4: Remove support for ISL 0.14.
2017-01-19 Uros Bizjak <ubizjak@gmail.com>
PR target/78478
* ax_check_define.m4: New file.
2017-01-17 Jakub Jelinek <jakub@redhat.com>
PR other/79046
* acx.m4 (GCC_BASE_VER): New m4 function.
(ACX_TOOL_DIRS): Require GCC_BASE_VER, for
--with-gcc-major-version-only use just major number from BASE-VER.
2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
PR go/78978
* hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
* configure.ac: Update year in copyright notice.
Sync from FSF GCC mainline, bringing in the following patches.
* Makefile.def: Likewise.
* Makefile.tpl: Likewise.
* configure: Regenerate.
* Makefile.in: Regenerate.
2016-12-21 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Don't bootstrap libmpx unless --with-build-config
includes bootstrap-mpx.
2016-12-01 Matthias Klose <doko@ubuntu.com>
* configure.ac: Don't use pkg-config to check for bdw-gc.
2016-11-30 Matthias Klose <doko@ubuntu.com>
* Makefile.def: Remove reference to boehm-gc target module.
* configure.ac: Include pkg.m4, check for --with-target-bdw-gc
options and for the bdw-gc pkg-config module.
2016-11-15 Matthias Klose <doko@ubuntu.com>
* config-ml.in: Remove references to GCJ.
* configure.ac: Likewise.
2016-09-30 Jakub Jelinek <jakub@redhat.com>
* configure.ac: Add target-libffi to target_libraries.
Readd libgcj target disablings, modified to only target-libffi.
Readd target addition of go to unsupported languages.
2016-09-30 Andrew Haley <aph@redhat.com>
* Makefile.def: Remove libjava.
* Makefile.tpl: Likewise.
* configure.ac: Likewise.
2016-09-26 Anton Kolesov <Anton.Kolesov@synopsys.com>
* configure.ac: Disable "sim" directory for arc*-*-*.
2016-09-12 Maciej W. Rozycki <macro@imgtec.com>
* configure.ac: Check for the minimum in-tree MPFR version
handled.
* configure.ac: Add fuchsia to targets that use ELF.
* configure: Regenerated.
bfd * configure.tgt: Add support for fuchsia (OS).
gas * configure.tgt: Add support for fuchsia (OS).
ld * Makefile.am: Add dependency information for earmelf_fuchsia.c.
* Makefile.in: Regenerate.
* configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
x86_64-*-fuchsia* targets.
* emulparams/armelf_fuchsia.sh: New file.
* emulparams/armelfb_fuchsia.sh: New file.
PR gas/19109
. * configure.ac: Note the 'none' is an acceptable argument to
--enable-compressed-debug-sections.
* configure: Regenerate.
gas * configure.ac: Restore --enable-compressed-debug-sections.
Do not enable compressed debug sections by default for x86 Linux
targets.
* configure: Regenerate.
ld * configure.ac: Add --enable-compressed-debug-sections.
* configure: Regenerate.
* config.in: Regenerate.
* ld.texinfo: Document how to determine the default action for
debug sections.
* ldmain.c (main): If DEFAULT_FLAG_COMPRESS_DEBUG is defined then
set the compress_debug field of the link_info structure to
zlib-gabi.
* lexsup.c (elf_static_list_options): Output the default setting
for the --compress-debug-sections option.
* NEWS: Mention the new configure option.
This patch removes the gas configure option:
--enable-compressed-debug-sections
and adds a toplevel configure option:
--enable-compressed-debug-sections={all,gas,gold,ld}
to enable compressed debug sections for gas, gold or ld by default. At
the moment, this configure option is ignored by gold and ld. For x86
Linux targets, default to compressing debug sections in gas.
PR gas/19109
* configure.ac: Add
--enable-compressed-debug-sections={all,gas,gold,ld}.
* configure: Regenerated.
gas/
PR gas/19109
* NEWS: Update --enable-compressed-debug-sections=.
* configure.ac: Remove --enable-compressed-debug-sections.
(DEFAULT_FLAG_COMPRESS_DEBUG): Check
--enable-compressed-debug-sections={all,gas} instead of
--enable-compressed-debug-sections. For x86 Linux targets,
default to compressing debug sections.
* configure: Regenerated.
Sync with GCC
2015-06-02 Jason Merrill <jason@redhat.com>
PR bootstrap/66319
* configure.ac: Use -std=gnu++98.
2015-05-28 Mike Frysinger <vapier@gentoo.org>
* configure.ac (--vtable-verify): Use AS_HELP_STRING for help.
* configure: Regenerate.
2015-05-11 Paulo Matos <paulo@matos-sorge.com>
* configure.ac: Fix typo.
* configure: Regenerate.
2015-05-03 Matthias Klose <doko@ubuntu.com>
* configure.ac: Match $host configured with triplets.
* configure: Regenerate.
2015-04-17 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/62077
* configure.ac (--enable-stage1-checking): Default to
release,misc,gimple,rtlflag,tree,types if --disable-checking
or --enable-checking is not specified and DEV-PHASE is not
experimental.
* configure: Regenerated.
2015-03-27 Uros Bizjak <ubizjak@gmail.com>
Install back PR target/47230 fix (Revert the revert).
config/
Sync with GCC
* mh-alpha-linux: Restored.
When bfd is configured as a shared library, we need to configure zlib
with --enable-host-shared since zlib is used by bfd.
PR ld/18355
* Makefile.def: Add extra_configure_flags to host zlib.
* configure.ac (extra_host_zlib_configure_flags): New. Set
to --enable-host-shared When bfd is to be built as shared
library. AC_SUBST.
* Makefile.in: Regenerated.
* configure: Likewise.
The top level configure supports --with-system-zlib. This patch makes
configure --help to display --with-system-zlib.
* configure.ac: Add --with-system-zlib.
* configure: Regenerated.
This patch was committed to GCC trunk as revision 215865.
2014-10-03 Jing Yu <jingyu@google.com>
* configure.ac: Add aarch64 to list of targets that support gold.
* configure: Regenerate.
* configure.ac (or1k*-*-rtems*): gdb not supported. The ordering
of the stanzas results in this not being caught by or1k*-*-* later.
* configure. Regenerated.
Signed-off-by: Christian Svensson <blue@cmd.nu>
2013-11-04 Balaji V. Iyer <balaji.v.iyer@intel.com>
* configure.ac: Added libcilkrts to noconfig list when C++ is not
supported.
* configure: Regenerated.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@204396 138bc75d-0d04-0410-961f-82ee72b054a4
