the lower 32-bit halves of the GPRS to be their own raw registers,
not pseudoregisters.
* ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag;
add ppc_ev0_upper_regnum flag.
* rs6000-tdep.c: #include "reggroups.h".
(spe_register_p): Recognize the ev upper half registers as SPE
registers.
(init_sim_regno_table): Build gdb->sim mappings for the upper-half
registers.
(e500_move_ev_register): New function.
(e500_pseudo_register_read, e500_pseudo_register_write): The 'ev'
vector registers are the pseudo-registers now, formed by splicing
together the gprs and the upper-half registers.
(e500_register_reggroup_p): New function.
(P): Macro deleted.
(P8, A4): New macro.
(PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted.
(PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New
macros.
(registers_e500): Rearrange register set so that the raw register
set contains 32-bit GPRs and upper-half registers, and the SPE
vector registers become pseudo-registers.
(rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p;
it has been deleted. Initialize ppc_ev0_upper_regnum. Many other
register numbers are now the same for the E500 as they are for
other PowerPC variants. Register e500_register_reggroup_p as the
register group function for the E500.
* Makefile.in (rs6000-tdep.o): Update dependencies.
Adapt PPC E500 native support to the new raw regcache layout.
* ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes.
(read_spliced_spe_reg, write_spliced_spe_reg): Deleted.
(fetch_spe_register, store_spe_register): Handle fetching/storing
all the SPE registers at once, if regno == -1. These now take
over the job of fetch_spe_registers and store_spe_registers.
(fetch_spe_registers, store_spe_registers): Deleted.
(fetch_ppc_registers, store_ppc_registers): Fetch/store gprs
unconditionally; they're always raw. Fetch/store SPE upper half
registers, if present, instead of ev registers.
(fetch_register, store_register): Remove sanity checks: gprs are
never pseudo-registers now, so we never need to even mention any
registers that are ever pseudoregisters.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
(ppc_spr_mi_dbcam, ppc_spr_mi_dbram0, ppc_spr_mi_dbram1)
(ppc_spr_md_cam, ppc_spr_md_ram0, ppc_spr_md_ram1): Add
missing MPC823 SPRs.
(ppc_spr_m_twb): Renamed from ppc_spr_md_twb; the old name was
incorrect. (This was corrected in GDB's register name tables on
2004-07-14.)
* ppc-tdep.h (struct gdbarch_tdep): New member: 'ppc_gprs_pseudo_p'.
* rs6000-tdep.c (rs6000_gdbarch_init): Initialize it to false on
all architectures except the E500.
* ppc-linux-nat.c: (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): New
#definitions.
(struct gdb_evrregset_t): New type.
(have_ptrace_getsetevrregs): New variable.
(get_spe_registers, read_spliced_spe_reg, fetch_spe_register,
fetch_spe_registers): New functions.
(fetch_register): Call fetch_spe_register as appropriate.
Assert that we're only passed raw register numbers.
(fetch_ppc_registers): Call fetch_spe_registers as appropriate.
Don't fetch gprs if they're pseudoregisters.
(set_spe_registers, write_spliced_spe_reg, store_spe_register,
store_spe_registers): New functions.
(store_register): Call store_spe_register as appropriate.
Assert that we're only passed raw register numbers.
(store_ppc_registers): Call store_spe_registers as appropriate.
Don't store gprs if they're pseudoregisters.
(struct gdbarch_tdep): New members: ppc_acc_regnum and
ppc_spefscr_regnum.
* rs6000-tdep.c (spe_register_p): New function.
(rs6000_dwarf2_stab_reg_to_regnum): Recognize numbers for acc and
spefscr.
(rs6000_gdbarch_init): Initialize the new members of the tdep
structure.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
ppc_fp0_regnum and ppc_fpscr_regnum: if they are -1, then this
processor variant lacks those registers.
(ppc_floating_point_unit_p): Change description to make it clear
that this returns info about the ISA, not the ABI.
* rs6000-tdep.c (ppc_floating_point_unit_p): Decide whether to
return true or false by checking tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum. The original code replicated the BFD
arch/mach switching done in rs6000_gdbarch_init; it's better to
keep that logic there, and just check the results here.
(rs6000_gdbarch_init): On the E500, set tdep->ppc_fp0_regnum and
tdep->ppc_fpscr_regnum to -1 to indicate that we have no
floating-point registers.
(ppc_supply_fpregset, ppc_collect_fpregset)
(rs6000_push_dummy_call, rs6000_extract_return_value)
(rs6000_store_return_value): Assert that we have floating-point
registers.
(rs6000_dwarf2_stab_reg_to_regnum): Add FIXME.
(rs6000_frame_cache): Don't note the locations at which
floating-point registers were saved if we have no fprs.
* aix-thread.c (supply_fprs, fill_fprs): Assert that we have FP
registers.
(fetch_regs_user_thread, fetch_regs_kernel_thread)
(store_regs_user_thread, store_regs_kernel_thread): Only call
supply_fprs / fill_fprs if we actually have floating-point
registers.
(special_register_p): Check ppc_fpscr_regnum before matching
against it.
(supply_sprs64, supply_sprs32, fill_sprs64, fill_sprs32): Don't
supply / collect fpscr if we don't have it.
* ppc-bdm.c: #include "gdb_assert.h".
(bdm_ppc_fetch_registers, bdm_ppc_store_registers): Assert that we
have floating-point registers, since I can't test this code on
FP-free systems to adapt it.
* ppc-linux-nat.c (ppc_register_u_addr): Don't match against the
fpscr and floating point register numbers if they don't exist.
(fetch_register): Assert that we have floating-point registers
before we reach the code that handles them.
(store_register): Same. And use tdep instead of calling
gdbarch_tdep again.
(fill_fpregset): Don't try to collect FP registers and fpscr if we
don't have them.
(ppc_linux_sigtramp_cache): Don't record the saved locations of
fprs and fpscr if we don't have them.
(ppc_linux_supply_fpregset): Don't supply fp regs and fpscr if we
don't have them.
* ppcnbsd-nat.c: #include "gdb_assert.h".
(getfpregs_supplies): Assert that we have floating-point registers.
* ppcnbsd-tdep.c (ppcnbsd_supply_fpreg, ppcnbsd_fill_fpreg): Same.
* ppcobsd-tdep.c: #include "gdb_assert.h".
(ppcobsd_supply_gregset, ppcobsd_collect_gregset): Assert that we
have floating-point registers.
* rs6000-nat.c (regmap): Don't match against the fpscr and
floating point register numbers if they don't exist.
(fetch_inferior_registers, store_inferior_registers,
fetch_core_registers): Only fetch / store / supply the
floating-point registers and the fpscr if we have them.
* Makefile.in (ppc-bdm.o, ppc-linux-nat.o, ppcnbsd-nat.o)
(ppcobsd-tdep.o): Update dependencies.
* rs6000-tdep.c (e500_store_return_value): Delete function.
(e500_extract_return_value): Delete function.
(rs6000_gdbarch_init): When SYSV, set "extract_return_value" and
"restore_return_value" to "ppc_sysv_abi_extract_return_value" and
"ppc_sysv_abi_restore_return_value" where applicable.
* ppc-tdep.h: (ppc_sysv_abi_store_return_value): Declare.
(ppc_sysv_abi_extract_return_value): Declare.
(ppc_sysv_abi_broken_store_return_value): Declare.
(ppc_sysv_abi_broken_extract_return_value): Declare.
(ppc_sysv_abi_broken_use_struct_convention:) Delete declaration.
* ppc-sysv-tdep.c (return_value_convention): Move definition to
start of file.
(do_ppc_sysv_return_value): New function.
(ppc_sysv_abi_extract_return_value): New function.
(ppc_sysv_abi_store_return_value): New function.
(ppc_sysv_abi_broken_extract_return_value): New function.
(ppc_sysv_abi_broken_store_return_value): New function.
(ppc_sysv_abi_use_struct_convention): Call
do_ppc_sysv_return_value.
* Makefile.in (ppc-sysv-tdep.o): Add $(gdb_assert_h).
* rs6000-tdep.c (rs6000_gdbarch_init): When 64 bit SysV ABI, set
push_dummy_call to ppc64_sysv_abi_push_dummy_call.
* ppc-sysv-tdep.c: Include "gdb_assert.h".
(ppc64_sysv_abi_push_dummy_call): New function.
(ppc64_sysv_abi_broken_push_dummy_call): New function.
* ppc-tdep.h (ppc64_sysv_abi_push_dummy_call): Declare.
(ppc64_sysv_abi_broken_push_dummy_call): Declare.
* rs6000-tdep.c (rs6000_gdbarch_init): When the 64 bit SysV ABI,
set extract_return_value, store_return_value and
use_struct_convention to ppc64_sysv_abi_extract_return_value,
ppc64_sysv_abi_store_return_value and
ppc64_sysv_abi_use_struct_convention.
* ppc-tdep.h (ppc64_sysv_abi_extract_return_value): Declare.
(ppc64_sysv_abi_store_return_value): Declare.
(ppc64_sysv_abi_use_struct_convention): Declare.
* ppc-sysv-tdep.c (enum return_value_convention): Define.
(ppc64_sysv_abi_extract_return_value): New function.
(ppc64_sysv_abi_store_return_value): New function.
(ppc64_sysv_abi_use_struct_convention): New function.
(ppc64_sysv_abi_return_value): New function.
GDB_OSABI_UNINITIALIZED.
* gdbarch.sh: Add osabi to struct gdbarch and to struct
gdbarch_info. Include "osabi.h" in gdbarch.c. Check osabi
in gdbarch_list_lookup_by_info and in gdbarch_update_p.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* osabi.c (gdbarch_lookup_osabi): Return GDB_OSABI_UNINITIALIZED if
there's no BFD.
(gdbarch_init_osabi): Remove osabi argument; use info.osabi.
* osabi.h (enum gdb_osabi): Move to defs.h.
(gdbarch_init_osabi): Update prototype.
* defs.h (enum gdb_osabi): Moved here.
* Makefile.in: Update dependencies.
Plus updates to alpha, arm, hppa, i386, mips, ns32k, ppc, sh, sparc, and vax
ports to match.
* ppc-tdep.h (struct gdbarch_tdep): Add ev registers.
* rs6000-tdep.c (rs6000_register_virtual_type): Return 64 bit
vector type for ev registers.
(e500_pseudo_register_read): New function.
(e500_pseudo_register_write): New function.
(e500_dwarf2_reg_to_regnum): New function.
(PPC_UISA_NOFP_SPRS): New macro.
(PPC_EV_REGS): New macro.
(PPC_GPRS_PSEUDO_REGS): New macro.
(registers_e500): New register set for e500.
(variants): Add e500 variant.
(rs6000_gdbarch_init): Move setting of pc, sp, fp regnums to
before setting architectural dependent variations. Initialize ev
registers numbers. Add case for e500 architecture. Set the
number of pseudo registers.
* ppc-linux-tdep.c (ppc_sysv_abi_use_struct_convention): New
function.
* ppc-tdep.h (ppc_sysv_abi_use_struct_convention): Export.
* rs6000-tdep.c (rs6000_gdbarch_init): Use different
structure returning convention for SYSV ABI case, but not
for GNU/Linux, FreeBSD, or NetBSD.
