mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2025-01-24 12:35:55 +08:00
4ff0bb2df5
674 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nick Clifton
|
1b8d1f5f38 |
Partially fix debuginfod tests in binutils testsuite.
PR 28029 * testsuite/binutils-all/debuginfod.exp: Replace -wK with -wk. |
||
Andrei Homescu
|
75a2da57a1 |
readelf: Reset file position to beginning for thin archive members
* readelf.c (process_archive): Reset file position to the beginning when calling process_object for thin archive members. * testsuite/binutils-all/readelf.exp: Add test. * testsuite/binutils-all/readelf.h.thin: New file. |
||
Alan Modra
|
93df3340fd |
readelf: report DF_1_PIE as "Position-Independent Executable"
I finally found time to teach readelf to identify PIEs in the file header display and program header display. So in place of "DYN (Shared object file)" which isn't completely true, show "DYN (Position-Independent Executable file)". It requires a little bit of untangling code in readelf due to process_program_headers setting up dynamic_addr and dynamic_size, needed to scan .dynamic for the DT_FLAGS_1 entry, and process_program_headers itself wanting to display the file type in some cases. At first I modified process_program_header using a "probe" parameter similar to get_section_headers in order to inhibit output, but decided it was cleaner to separate out locate_dynamic_sections. binutils/ * readelf.c (locate_dynamic_section, is_pie): New functions. (get_file_type): Replace e_type parameter with filedata. Call is_pie for ET_DYN. Update all callers. (process_program_headers): Use local variables dynamic_addr and dynamic_size, updating filedata on exit from function. Set dynamic_size of 1 to indicate no dynamic section or segment. Update tests of dynamic_size throughout. * testsuite/binutils-all/x86-64/pr27708.dump: Update expected output. ld/ * testsuite/ld-pie/vaddr-0.d: Update expected output. gdb/ * testsuite/lib/gdb.exp (exec_is_pie): Match new PIE readelf output. |
||
Maciej W. Rozycki
|
9204ccd4b1 |
MIPS/opcodes: Do not use CP0 register names for control registers
The CP0 control register set has never been defined, however encodings
for the CFC0 and CTC0 instructions remained available for implementers
up until the MIPS32 ISA declared them invalid and causing the Reserved
Instruction exception[1]. Therefore we handle them for both assembly
and disassembly, however in the latter case the names of CP0 registers
from the regular set are incorrectly printed if named registers are
requested. This is because we do not define separate operand classes
for coprocessor regular and control registers respectively, which means
the disassembler has no way to tell the two cases apart. Consequently
nonsensical disassembly is produced like:
cfc0 v0,c0_random
Later the MIPSr5 ISA reused the encodings for XPA ASE MFHC0 and MTHC0
instructions[2] although it failed to document them in the relevant
opcode table until MIPSr6 only.
Correct the issue then by defining a new register class, OP_REG_CONTROL,
and corresponding operand codes, `g' and `y' for the two positions in
the machine instruction a control register operand can take. Adjust the
test cases affected accordingly.
While at it swap the regular MIPS opcode table "cfc0" and "ctc0" entries
with each other so that they come in the alphabetical order.
References:
[1] "MIPS32 Architecture For Programmers, Volume II: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 1.00, August 29, 2002, Table A-9 "MIPS32 COP0 Encoding of
rs Field", p. 242
[2] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Section 3.2 "Alphabetical List of
Instructions", pp. 195, 216
include/
* opcode/mips.h: Document `g' and `y' operand codes.
(mips_reg_operand_type): Add OP_REG_CONTROL enumeration
constant.
gas/
* tc-mips.c (convert_reg_type) <OP_REG_CONTROL>: New case.
(macro) <M_TRUNCWS, M_TRUNCWD>: Use the `g' rather than `G'
operand code.
opcodes/
* mips-dis.c (print_reg) <OP_REG_COPRO>: Move control register
handling code over to...
<OP_REG_CONTROL>: ... this new case.
* mips-opc.c (decode_mips_operand) <'g', 'y'>: New cases.
(mips_builtin_opcodes): Update "cfc1", "ctc1", "cttc1", "cttc2",
"cfc0", "ctc0", "cfc2", "ctc2", "cfc3", and "ctc3" entries
replacing the `G' operand code with `g'. Update "cftc1" and
"cftc2" entries replacing the `E' operand code with `y'.
* micromips-opc.c (decode_micromips_operand) <'g'>: New case.
(micromips_opcodes): Update "cfc1", "cfc2", "ctc1", and "ctc2"
entries replacing the `G' operand code with `g'.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: Correct CFC0
operand disassembly.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: Likewise.
|
||
|
Maciej W. Rozycki
|
9623cc5d1f |
MIPS/binutils/testsuite: Fix XPA and Virtualization ASE cases
Fix commit
|
||
|
Nick Clifton
|
2335639744 |
Adjust readelf's output so that section symbols without a name as shown with their section name.
binutils* readelf.c (print_dynamic_symbol): Print the section name for section symbols without a name of their own. * testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d: Adjust expected output to allow for named section symbols. * testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/binutils-all/readelf.s-64: Likewise. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. ld * testsuite/ld-aarch64/variant_pcs-now.d: Adjust expected output to allow for named section symbols. * testsuite/ld-aarch64/variant_pcs-r.d: Likewise. * testsuite/ld-aarch64/variant_pcs-shared.d: Likewise. * testsuite/ld-alpha/tlsbin.rd: Likewise. * testsuite/ld-alpha/tlsbinr.rd: Likewise. * testsuite/ld-alpha/tlspic.rd: Likewise. * testsuite/ld-arm/rodata-merge-map.sym: Likewise. * testsuite/ld-arm/script-type.sym: Likewise. * testsuite/ld-cris/libdso-2.d: Likewise. * testsuite/ld-cris/pr16044.d: Likewise. * testsuite/ld-elf/sec64k.exp: Likewise. * testsuite/ld-ia64/tlsbin.rd: Likewise. * testsuite/ld-ia64/tlspic.rd: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise. * testsuite/ld-mmix/bspec1.d: Likewise. * testsuite/ld-mmix/bspec2.d: Likewise. * testsuite/ld-mmix/local1.d: Likewise. * testsuite/ld-mmix/local3.d: Likewise. * testsuite/ld-mmix/local5.d: Likewise. * testsuite/ld-mmix/local7.d: Likewise. * testsuite/ld-mmix/undef-3.d: Likewise. * testsuite/ld-powerpc/tlsso.r: Likewise. * testsuite/ld-powerpc/tlsso32.r: Likewise. * testsuite/ld-powerpc/tlstocso.r: Likewise. * testsuite/ld-s390/tlsbin.rd: Likewise. * testsuite/ld-s390/tlsbin_64.rd: Likewise. * testsuite/ld-s390/tlspic.rd: Likewise. * testsuite/ld-s390/tlspic_64.rd: Likewise. * testsuite/ld-sparc/gotop32.rd: Likewise. * testsuite/ld-sparc/gotop64.rd: Likewise. * testsuite/ld-sparc/tlssunbin32.rd: Likewise. * testsuite/ld-sparc/tlssunbin64.rd: Likewise. * testsuite/ld-sparc/tlssunnopic32.rd: Likewise. * testsuite/ld-sparc/tlssunnopic64.rd: Likewise. * testsuite/ld-sparc/tlssunpic32.rd: Likewise. * testsuite/ld-sparc/tlssunpic64.rd: Likewise. * testsuite/ld-tic6x/common.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. gas * testsuite/gas/aarch64/dwarf.d: Adjust expected output to allow for named section symbols. * testsuite/gas/arm/thumbver.d: Likewise. * testsuite/gas/bfin/loop_temps.d: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/elf/section2.e-arm: Likewise. * testsuite/gas/elf/section2.e-csky: Likewise. * testsuite/gas/elf/section2.e-m32r: Likewise. * testsuite/gas/elf/section2.e-mips: Likewise. * testsuite/gas/elf/section2.e-msp430: Likewise. * testsuite/gas/elf/section2.e-riscv: Likewise. * testsuite/gas/elf/section2.e-rl78: Likewise. * testsuite/gas/elf/section2.e-rx: Likewise. * testsuite/gas/elf/section2.e-score: Likewise. * testsuite/gas/elf/section2.e-tic6x: Likewise. * testsuite/gas/elf/section2.e-unused: Likewise. * testsuite/gas/elf/section2.e-v850: Likewise. * testsuite/gas/elf/section2.e-xtensa: Likewise. * testsuite/gas/ia64/alias-ilp32.d: Likewise. * testsuite/gas/ia64/alias.d: Likewise. * testsuite/gas/ia64/global.d: Likewise. * testsuite/gas/microblaze/relax_size.elf: Likewise. * testsuite/gas/microblaze/relax_size2.elf: Likewise. * testsuite/gas/mips/global-local-symtab-sort-n64t.d: Likewise. * testsuite/gas/mips/global-local-symtab-sort-o32t.d: Likewise. * testsuite/gas/mmix/bspec-1.d: Likewise. * testsuite/gas/mmix/byte-1.d: Likewise. * testsuite/gas/mmix/comment-1.d: Likewise. * testsuite/gas/mmix/loc-1.d: Likewise. * testsuite/gas/mmix/loc-2.d: Likewise. * testsuite/gas/mmix/loc-3.d: Likewise. * testsuite/gas/mmix/loc-4.d: Likewise. * testsuite/gas/mmix/loc-5.d: Likewise. * testsuite/gas/tic6x/scomm-directive-4.d: Likewise. |
||
|
Alan Modra
|
985e026451 |
PR27725, better objcopy -p times
Nanosecond rather than second resolution. PR 27725 * configure.ac: Check for sys/time.h and utimensat. Use standard checks for mkstemp and mkdtemp. Whitespace. Check for nanosecond members of struct stat. * rename.c: Prefer sys/time.h for utimes over utime.h for utime. (STAT_TIMESPEC, STAT_TIMESPEC_NS): Define (get_stat_atime_ns, get_stat_mtime_ns): New inline functions. (get_stat_atime, get_stat_mtime): Likewise. (set_times): Choose first available of utimensat, utimes, utime. Use above inline functions to set timespec and timeval values. * configure: Regenerate. * config.in: Regenerate. * testsuite/binutils-all/objcopy.exp (objcopy_test): Add test of file timestamp when --preserve-dates is used. |
||
H.J. Lu
|
9917b5596a |
elf: Set p_memsz to p_filesz for loadable PT_NOTE segment
Since p_memsz of the loadable PT_NOTE segment should be the same as p_filesz, set p_memsz on the loadable PT_NOTE segment when updating p_filesz. bfd/ PR binutils/27708 * elf.c (assign_file_positions_for_non_load_sections): Set p_memsz to p_filesz for the loadable PT_NOTE segment. binutils/ PR binutils/27708 * testsuite/binutils-all/x86-64/pr27708.dump: New file. * testsuite/binutils-all/x86-64/pr27708.exe.bz2: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Run binutils/27708 test. |
||
|
Nick Clifton
|
ca0e11aa4b |
Gate the displaying of non-debug sections in separate debuginfo files.
PR 27478 * objdump.c (process_links): New variable. (usage): Add --process-links. (long_options): Likewise. (dump_bfd): Stop processing once the bfd has been loaded unless this is the main file or process_links has been enabled. (main): Handle the process-links option. * readelf.c (process_links): New variable. (struct filedata): Add is_separate field. (options): Add --process-links. (usage): Likewise. (parse_args): Likewise. (process_file_header): Include the filename when dumping information for separate debuginfo files. (process_program_headers): Likewise. (process_section_headers): Likewise. (process_section_groups): Likewise. (process_relocs): Likewise. (process_dynamic_section): Likewise. (process_version_sections): Likewise. (display_lto_symtab): Likewise. (process_symbol_table): Likewise. (process_syminfo): Likewise. (initialise_dumps_by_name): Likewise. (process_section_contents): Likewise. (process_notes_at): Likewise. (process_notes): Likewise. (open_file): Add is_separate parameter. Use to initialise the is_separate field in the filedata structure. (open_deug): Update call to open_file. (process_object): Add processing of the contents of separate debuginfo files, gated by the process_links variable. (process_archive): Update call to open_file. (process_file): Initialise the is_separate field in the filedata structure. * dwarf.c (load_separate_debug_info_file): Only report the loading of a separate file if debug links are being dumped. * objcopy.c (keep_section_symbols): New variable. (enum command_line_switch): Add OPTION_KEEP_SYMBOLS. (strip_options): Add keep-section-symbols. (copy_options): Likewise. (copy_usage): Likewise. (strip_usage): Likewise. (copy_object): Keep section symbols if requested by command line option. (strip_main): Handle --keep-section-symbols. (copy_main): Likewise. * doc/binutils.texi: Document the new options. * NEWS: Mention the new features. * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Update options passed to objdump. Use diff rather than cmp to compare the dumped data. * testsuite/binutils-all/objdump.WK2: Update regexp. * testsuite/binutils-all/objdump.WK3: Update regexp. * testsuite/binutils-all/objdump.exp: Use --process-links instead of --dwarf=follow-links. * testsuite/binutils-all/readelf.exp (readelf_test): Include readelf's output in the log when the test fails. Add the -P option to the -wKis test. * testsuite/binutils-all/readelf.wKis: Update expected output. |
||
|
H.J. Lu
|
ecd65684f5 |
Warn for missing separate debug files only if needed
We shouldn't warn missing separate debug files when debug info isn't needed. PR binutils/27486 * dwarf.c (load_separate_debug_info): Issue warning only if do_debug_links is set. * testsuite/binutils-all/compress.exp: Run objdump and readelf with missing debug file. |
||
|
Alan Modra
|
4d496013a2 |
Fail run_dump_test when an error is expected but not seen
* testsuite/lib/binutils-common.exp: Whitespace fixes throughout. (run_dump_test): Fail if expecting errors from a file like we do for error strings, if no error is seen. |
||
|
Alan Modra
|
0be51eb4c3 |
pr26548 test
I forgot that .sleb128 handles bignums, so this test should run fine for 32-bit targets on 32-bit hosts. * testsuite/binutils-all/readelf.exp (pr26548): Run for 32-bit too. |
||
|
Alan Modra
|
b9b204b311 |
read_leb128 overflow checking
There is a tiny error left in dwarf.c:read_leb128 after Nick fixed the signed overflow problem in code I wrote. It's to do with sleb128 values that have unnecessary excess bytes. For example, -1 is represented as 0x7f, the most efficient encoding, but also as 0xff,0x7f or 0xff,0xff,0x7f and so on. None of these sequences overflow any size signed value, but read_leb128 will report an overflow given enough excess bytes. This patch fixes that problem, and since the proper test for signed values with excess bytes can easily be adapted to also test a sleb byte with just some bits that overflow the result, I changed the code to not use signed right shifts. (The C standard ISO/IEC 9899:1999 6.5.7 says signed right shifts of negative values have an implementation defined value. A long time ago I even used a C compiler for a certain microprocessor that always did unsigned right shifts. Mind you, it is very unlikely to be compiling binutils with such a compiler.) bfd/ * wasm-module.c: Guard include of limits.h. (CHAR_BIT): Provide backup define. (wasm_read_leb128): Use CHAR_BIT to size "result" in bits. Correct signed overflow checking. opcodes/ * wasm32-dis.c: Include limits.h. (CHAR_BIT): Provide backup define. (wasm_read_leb128): Use CHAR_BIT to size "result" in bits. Correct signed overflow checking. binutils/ * dwarf.c: Include limits.h. (CHAR_BIT): Provide backup define. (read_leb128): Use CHAR_BIT to size "result" in bits. Correct signed overflow checking. * testsuite/binutils-all/pr26548.s, * testsuite/binutils-all/pr26548.d, * testsuite/binutils-all/pr26548e.d: New tests. * testsuite/binutils-all/readelf.exp: Run them. (readelf_test): Drop unused "xfails" parameter. Update all uses. |
||
|
Alan Modra
|
1781a9d0f3 |
nds32_elf_get_relocated_section_contents
nds32_elf_get_relocated_section_contents uses nds32_get_section_contents to read sections contents, but nds32_get_section_contents has the wrong behaviour as it calls bfd_malloc_and_get_section. That function always mallocs its output buffer, whereas get_relocated_section_contents must support an already allocated buffer. bfd/ * elf32-nds32.c (nds32_get_section_contents): Replace bfd_malloc_and_get_section with bfd_get_full_section_contents. (nds32_elf_relax_delete_blanks): Init contents. (nds32_elf_relax_section, nds32_relax_fp_as_gp): Likewise. binutils/ * testsuite/binutils-all/compress.exp: Remove nds32 xfails. * testsuite/binutils-all/objdump.exp: Likewise. |
||
|
Nick Clifton
|
c46b706620 |
Change the readelf and objdump programs so that they will automatically follow links to separate debug info files.
* configure.ac (follow-debug-links): Add option to enable or
disable the following of debug links by default. Set the
default for the option to be 'follow'.
* dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS.
(dwarf_select_sections_by_names): Add no-follow-links option.
(dwarf_select_sections_by_letter): Add 'N' option.
* objdump.c (usage): Add conditional text describing the
follow links option.
(slurp_symtab): Ensure that there is a NULL entry at the end
of the symbol table.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): When extending the symbol table, ensure that there
is still a NULL entry at the end.
* readelf.c (usage): Add conditional text describing the
follow links option.
* doc/binutils.texi: Update documentation for objcopy and
readelf.
* doc/debug.options.texi: Update documentation of the
follow-links option.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/binutils-all/compress.exp: Add the -WN option to
objdump command lines that are not expecting to follow links.
* testsuite/binutils-all/readelf.exp: Add the
--debug-dump=no-follow-links option to tests that are not
expecting to follow debug links.
gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link
following.
* testsuite/gas/xgate/insns-dwarf2.d: Likewise.
ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically
following debug links.
|
||
|
Alan Modra
|
17e04eff81 |
binutils testsuite: replace unresolved with unsupported
You'd think "unresolved" would be correct for an objcopy test when the assembler refuses to assemble one of our source files. After all, the test of objcopy hasn't been run. However, "unresolved" results in runtest returning with an error status. If instead we report "unsupported", runtest returns success. Which is a little less confusing to a user who doesn't see any errors reported unless they look in log files. * testsuite/binutils-all/objcopy.exp: Report "unsupported" when gas or ld fails to build a testcase rather than "unresolved". Report "fail" when readelf returns an error status rather than "unresolved". * testsuite/binutils-all/ar.exp: Likewise. * testsuite/binutils-all/compress.exp: Likewise. * testsuite/binutils-all/readelf.exp: Likewise. |
||
|
Alan Modra
|
8f054a7a5a |
binutils test pr25662: don't use single character labels
This fixes the test for z80, which predefine register symbols "a" and "c" among others. * testsuite/binutils-all/pr25662.s: Replace "a" with "aaa" and "c" with "ccc" labels. |
||
|
Alan Modra
|
a57d17732e |
Remove arm-symbianelf
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. |
||
|
H.J. Lu
|
5424d7ed94 |
readelf: Add 'R' and 'D' to "Key to Flags:"
Add "R (retain)" and "D (mbind)" to "Key to Flags:". PR binutils/27281 * readelf.c (process_section_headers): Add 'R' and 'D' to "Key to Flags:". * testsuite/binutils-all/retain1a.d: Updated. |
||
|
H.J. Lu
|
d1bcae833b |
ELF: Don't generate unused section symbols
For ELF targets, section symbols are required only for relocations. With -ffunction-sections -fdata-sections, there can be many unused section symbols. Sizes of libstdc++.a on Linux/x86-64 in GCC 11 are With unused section symbols : 39411698 bytes Without unused section symbols: 39227002 bytes The unused section symbols in libstdc++.a occupy more than 180 KB. Add BSF_SECTION_SYM_USED to indicate if a section symbol should be included in the symbol table. The BSF_SECTION_SYM_USED should be set if the section symbol is used for relocation or the section symbol is always included in the symbol table. Add keep_unused_section_symbols to bfd_target to indicate if unused section symbols should be kept. If TARGET_KEEP_UNUSED_SECTION_SYMBOLS is defined as FALSE, unused ection symbols will be removed. Tested on Linux/x86. Other ELF backends need to: 1. Define TARGET_KEEP_UNUSED_SECTION_SYMBOLS to FALSE. 2. Mark used section symbols in assembler backend. 3. Remove unused section symbols from expected assembler and linker outputs. bfd/ PR 27109 * aix386-core.c (core_aix386_vec): Initialize keep_unused_section_symbol to TARGET_KEEP_UNUSED_SECTION_SYMBOLS. * aout-target.h (MY (vec)): Likewise. * binary.c (binary_vec): Likewise. * cisco-core.c (core_cisco_be_vec): Likewise. (core_cisco_le_vec): Likewise. * coff-alpha.c (alpha_ecoff_le_vec): Likewise. * coff-i386.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff-ia64.c (TARGET_SYM): Likewise. * coff-mips.c (mips_ecoff_le_vec): Likewise. (mips_ecoff_be_vec): Likewise. (mips_ecoff_bele_vec): Likewise. * coff-rs6000.c (rs6000_xcoff_vec): Likewise. (powerpc_xcoff_vec): Likewise. * coff-sh.c (sh_coff_small_vec): Likewise. (sh_coff_small_le_vec): Likewise. * coff-tic30.c (tic30_coff_vec): Likewise. * coff-tic54x.c (tic54x_coff0_vec): Likewise. (tic54x_coff0_beh_vec): Likewise. (tic54x_coff1_vec): Likewise. (tic54x_coff1_beh_vec): Likewise. (tic54x_coff2_vec): Likewise. (tic54x_coff2_beh_vec): Likewise. * coff-x86_64.c (TARGET_SYM): Likewise. (TARGET_SYM_BIG): Likewise. * coff64-rs6000.c (rs6000_xcoff64_vec): Likewise. (rs6000_xcoff64_aix_vec): Likewise. * coffcode.h (CREATE_BIG_COFF_TARGET_VEC): Likewise. (CREATE_BIGHDR_COFF_TARGET_VEC): Likewise. (CREATE_LITTLE_COFF_TARGET_VEC): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Likewise. (TARGET_LITTLE_SYM): Likewise. * hppabsd-core.c (core_hppabsd_vec): Likewise. * hpux-core.c (core_hpux_vec): Likewise. * i386msdos.c (i386_msdos_vec): Likewise. * ihex.c (ihex_vec): Likewise. * irix-core.c (core_irix_vec): Likewise. * mach-o-target.c (TARGET_NAME): Likewise. * mmo.c (mmix_mmo_vec): Likewise. * netbsd-core.c (core_netbsd_vec): Likewise. * osf-core.c (core_osf_vec): Likewise. * pdp11.c (MY (vec)): Likewise. * pef.c (pef_vec): Likewise. (pef_xlib_vec): Likewise. * plugin.c (plugin_vec): Likewise. * ppcboot.c (powerpc_boot_vec): Likewise. * ptrace-core.c (core_ptrace_vec): Likewise. * sco5-core.c (core_sco5_vec): Likewise. * som.c (hppa_som_vec): Likewise. * srec.c (srec_vec): Likewise. (symbolsrec_vec): Likewise. * tekhex.c (tekhex_vec): Likewise. * trad-core.c (core_trad_vec): Likewise. * verilog.c (verilog_vec): Likewise. * vms-alpha.c (alpha_vms_vec): Likewise. * vms-lib.c (alpha_vms_lib_txt_vec): Likewise. * wasm-module.c (wasm_vec): Likewise. * xsym.c (sym_vec): Likewise. * elf.c (ignore_section_sym): Return TRUE if BSF_SECTION_SYM_USED isn't set. (elf_map_symbols): Don't include ignored section symbols. * elfcode.h (elf_slurp_symbol_table): Also set BSF_SECTION_SYM_USED on STT_SECTION symbols. * elflink.c (bfd_elf_final_link): Generated section symbols only when emitting relocations or reqired. * elfxx-x86.h (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. * syms.c (BSF_SECTION_SYM_USED): New. * targets.c (TARGET_KEEP_UNUSED_SECTION_SYMBOLS): New. (bfd_target): Add keep_unused_section_symbols. (bfd_keep_unused_section_symbols): New. * bfd-in2.h: Regenerated. binutils/ PR 27109 * objcopy.c (copy_object): Handle section symbols for non-relocatable inputs. * testsuite/binutils-all/readelf.exp (readelf_test): Check is_elf_unused_section_symbols. * testsuite/binutils-all/readelf.s-64: Updated. * testsuite/binutils-all/readelf.ss: Likewise. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.s-64-unused: New file. * testsuite/binutils-all/readelf.ss-64-unused: Likewise. * testsuite/binutils-all/readelf.ss-unused: Likewise. * testsuite/lib/binutils-common.exp (is_elf_unused_section_symbols): New proc. gas/ChangeLog: PR 27109 * read.c (s_reloc): Call symbol_mark_used_in_reloc on the section symbol. * subsegs.c (subseg_set_rest): Set BSF_SECTION_SYM_USED if needed. * write.c (adjust_reloc_syms): Call symbol_mark_used_in_reloc on the section symbol. (set_symtab): Don't generate unused section symbols. (maybe_generate_build_notes): Call symbol_mark_used_in_reloc on the section symbol. * config/obj-elf.c (elf_adjust_symtab): Call symbol_mark_used_in_reloc on the group signature symbol. * testsuite/gas/cfi/cfi-label.d: Remove unused section symbols from expected output. * testsuite/gas/elf/elf.exp (run_elf_list_test): Check is_elf_unused_section_symbols. * testsuite/gas/elf/section2.e: Updated. * testsuite/gas/elf/section2.e-unused: New file. * testsuite/gas/elf/symver.d: Remove unused section symbols. * testsuite/gas/i386/ilp32/elf/symver.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-1.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-3.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-size-5.d: Likewise. * testsuite/gas/i386/ilp32/x86-64-unwind.d: Likewise. * testsuite/gas/i386/size-1.d: Likewise. * testsuite/gas/i386/size-3.d: Likewise. * testsuite/gas/i386/svr4.d: Likewise. * testsuite/gas/i386/x86-64-size-1.d: Likewise. * testsuite/gas/i386/x86-64-size-3.d: Likewise. * testsuite/gas/i386/x86-64-size-5.d: Likewise. * testsuite/gas/i386/x86-64-unwind.d: Likewise. ld/ PR 27109 * testsuite/ld-elf/export-class.sd: Adjust the expected output. * testsuite/ld-elf/loadaddr3b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Likewise. * testsuite/ld-i386/ibt-plt-2a.d: Likewise. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-3a.d: Likewise. * testsuite/ld-i386/ibt-plt-3c.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-x86-64/bnd-branch-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2-now.d: Likewise. * testsuite/ld-x86-64/bnd-ifunc-2.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1-now.d: Likewise. * testsuite/ld-x86-64/bnd-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3a.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/pr19609-4e.d: Likewise. * testsuite/ld-x86-64/pr19609-6a.d: Likewise. * testsuite/ld-x86-64/pr19609-6b.d: Likewise. * testsuite/ld-x86-64/pr19609-7b.d: Likewise. * testsuite/ld-x86-64/pr19609-7d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr21038b-now.d: Likewise. * testsuite/ld-x86-64/pr21038b.d: Likewise. * testsuite/ld-x86-64/pr21038c-now.d: Likewise. * testsuite/ld-x86-64/pr21038c.d: Likewise. * testsuite/ld-x86-64/pr23854.d: Likewise. * testsuite/ld-x86-64/pr25416-3.d: Likewise. * testsuite/ld-x86-64/pr25416-4.d: Likewise. * testsuite/ld-i386/plt-pic.pd: Likewise. * testsuite/ld-i386/plt-pic2.dd: Likewise. * testsuite/ld-i386/plt.pd: Likewise. * testsuite/ld-i386/plt2.dd: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbin2.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsgdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-i386/tlspic2.rd: Likewise. * testsuite/ld-x86-64/mpx3.dd: Likewise. * testsuite/ld-x86-64/mpx3n.dd: Likewise. * testsuite/ld-x86-64/mpx4.dd: Likewise. * testsuite/ld-x86-64/mpx4n.dd: Likewise. * testsuite/ld-x86-64/pe-x86-64-1.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/plt.pd: Likewise. * testsuite/ld-x86-64/plt2.dd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbin2.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-x86-64/tlspic2.rd: Likewise. * testsuite/ld-elf/sec64k.exp: Check is_elf_unused_section_symbols. |
||
|
Alan Modra
|
f9a6a8f09d |
PR27116, Spelling errors found by Debian style checker
PR 27116 bfd/ * xcofflink.c: Correct spelling in comments. binutils/ * coffgrok.c (do_type): Correct spelling of auxiliary in errors. * doc/binutils.texi: Correct grammar. * readelf.c (process_version_sections): Correct spelling of auxiliary in warning. * testsuite/binutils-all/vax/objdump.exp: Comment grammar fix. config/ * override.m4: Correct comment grammar. gas/ * config/tc-i386.c: Correct comment spelling. * config/tc-riscv.c: Likewise. * config/tc-s390.c: Correct comment grammar. * doc/c-i386.texi: Correct spelling. * doc/c-s390.texi: Correct grammar. gold/ * tilegx.cc: Correct comment spelling. gprof/ * README: Correct grammar. * gprof.texi: Likewise. include/ * coff/internal.h: Correct comment spelling. * coff/sym.h: Likewise. * opcode/aarch64.h: Likewise. ld/ * configure.tgt: Correct comment grammar. * emultempl/m68hc1xelf.em: Likewise. * ld.texi: Correct grammar. |
||
|
Alan Modra
|
250d07de5c | Update year range in copyright notice of binutils files | ||
|
H.J. Lu
|
3e9373fcaf |
binutils: Use the newly built assembler and linker
Use the newly built assembler and linker in test_gnu_debuglink by passing $gcc_gas_flag to target_compile. * testsuite/binutils-all/compress.exp (test_gnu_debuglink): Pass $gcc_gas_flag to target_compile. |
||
|
H.J. Lu
|
279d901e5a |
x86-64: Add Intel LAM property support
Add Intel Linear Address Masking (LAM) property support. LAM modifies the checking that is applied to 64-bit linear addresses, allowing software to use of the untranslated address bits for metadata. bfd/ * elf-linker-x86.h (elf_x86_cet_report): Renamed to ... (elf_x86_prop_report): This. (elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report and lam_u57_report. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and GNU_PROPERTY_X86_FEATURE_1_LAM_U57. (_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only for 64-bit output. binutils/ * NEWS: Mention LAM_U48 and LAM_U57 support. * elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57. (usage): Add lam_u48 and lam_u57. * readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57. * doc/binutils.texi: Update elfedit with lam_u48 and lam_u57 support. * testsuite/binutils-all/x86-64/lam-u48.d: New file. * testsuite/binutils-all/x86-64/lam-u48.s: Likewise. * testsuite/binutils-all/x86-64/lam-u57.d: Likewise. * testsuite/binutils-all/x86-64/lam-u57.s: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New. (GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise. ld/ * NEWS: Mention LAM_U48 and LAM_U57 support. * ld.texi: Document LAM_U48 and LAM_U57 support. * emulparams/cet.sh: Updated. * emulparams/elf_x86_64.sh: Source x86-64-lam.sh. * emulparams/x86-64-lam.sh: New file. * testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run LAM tests. |
||
Jozef Lawrynowicz
|
2c6f3e56cb |
ELF: Support .noinit and .persistent sections
The ".persistent" section is for data that should be initialized during
load, but not during application reset.
The ".noinit" section is for data that should not be initialized during
load or application reset.
Targets utilizing the elf.sc linker script template can define
HAVE_{NOINIT,PERSISTENT}=yes to include the .noinit or .persistent
output sections in the generated linker script.
Targets with existing support for .noinit did not handle unique
.noinit.* and .gnu.linkonce.n.* sections the .noinit output section,
this patch also fixes that.
bfd/ChangeLog:
* elf.c (special_sections_g): Add .gnu.linkonce.n and .gnu.linkonce.p.
(special_sections_n): Add .noinit.
(special_sections_p): Add .persistent.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp (supports_noinit_section): New.
(supports_persistent_section): New.
gas/ChangeLog:
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section25.d: New test.
* testsuite/gas/elf/section25.s: New test.
* testsuite/gas/elf/section26.d: New test.
* testsuite/gas/elf/section26.s: New test.
ld/ChangeLog:
* emulparams/armelf.sh (OTHER_SECTIONS): Remove .noinit section
definition.
Define HAVE_{NOINIT,PERSISTENT}=yes.
* scripttempl/avr.sc (.noinit): Add .noinit.* and .gnu.linkonce.n.*
input section wildcard patterns.
* scripttempl/elf.sc: Define .noinit and .persistent sections when
HAVE_NOINIT or HAVE_PERSISTENT are defined to "yes".
* scripttempl/elf32msp430.sc (.noinit): Add .noinit.* and
.gnu.linkonce.n.*. input section wildcard patterns.
(.persistent): Add .persistent.* and
.gnu.linkonce.p.*. input section wildcard patterns.
* scripttempl/elfarcv2.sc (.noinit): Add .noinit.* and
.gnu.linkonce.n.*. input section wildcard patterns.
* scripttempl/pru.sc: Likewise.
* testsuite/ld-elf/noinit-sections-1.d: New test.
* testsuite/ld-elf/noinit-sections-2.d: New test.
* testsuite/ld-elf/noinit-sections-2.l: New test.
* testsuite/ld-elf/noinit-sections.s: New test.
* testsuite/ld-elf/persistent-sections-1.d: New test.
* testsuite/ld-elf/persistent-sections-2.d: New test.
* testsuite/ld-elf/persistent-sections-2.l: New test.
* testsuite/ld-elf/persistent-sections.s: New test.
|
||
|
Alan Modra
|
6595cf3ce8 |
nm ifunc test tweaks
* testsuite/binutils-all/nm.exp (ifunc): xfail more targets. |
||
|
Nick Clifton
|
9d37f01307 | Add missing test file | ||
|
Nick Clifton
|
e6f6aa8d18 |
Add option to nm to change the characters displayed for ifunc symbols. Add a configure time option to change the default characters.
PR 22967 * nm.c (ifunc_type_chars): New variable. (long_options): Add --ifunc-chars. (print_symbol): Use ifunc_type_chars for ifunc symbols. (main): Handle the new option. * doc/binutils.texi: Document the new option. * configure.ac: Add --enable-f-for-ifunc-symbols option which changes the default symbol displayed by nm. * NEWS: Mention the new feature. * testsuite/binutils-all/nm.exp: Test the new feature. * config.in: Regenerate. * configure: Regenerate. |
||
|
Jozef Lawrynowicz
|
cc6fd584ed |
Fix SHF_GNU_RETAIN testsuite fallout
binutils/ChangeLog: * testsuite/binutils-all/readelf-maskos-1a.d: Fix test for unrecognized bit set in SHF_MASKOS range. * testsuite/binutils-all/readelf-maskos-1b.d: Likewise. * testsuite/binutils-all/readelf-maskos-unknown.s: New test. ld/ChangeLog: * testsuite/ld-elf/retain3.s: Move symbolic reference into writeable .data section from read-only .text section. * testsuite/ld-elf/retain5.d: Don't pass --print-gc-sections for test that doesn't require it. * testsuite/ld-elf/retain6a.d: Adjust test. * testsuite/ld-elf/retain6main.s: Move symbolic reference into writeable .data section from read-only .text section. |
||
|
Jozef Lawrynowicz
|
99fabbc973 |
Support SHF_GNU_RETAIN ELF section flag
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ | Name | Value | +-------------------------------------+ | SHF_GNU_RETAIN | 0x200000 (1 << 21) | +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test. |
||
|
Nick Clifton
|
50ea087755 |
Fix readelf's and objdump's dislplay of DWO links when multiple links are present.
PR 26829 * dwarf.c (struct dwo_info): Add cu_offset field. (add_dwo_info): Add cu_offset parameter. Record in new dwo_info struct. (add_dwo_name): Add cu_offset field. (add_dwo_dir): Add cu_offset field. (add_dwo_id): Add cu_offset field. (read_and_display_attr_value): Pass cu_offset to dwo recording functions. (load_separate_debug_files): Accumulate name, dir and id values and display once for each CU. * testsuite/binutils-all/dwo.sL Use a separate CU for the second dwo link. * testsuite/binutils-all/readelf.k2: Update expected output. |
||
Howard Chu
|
f3016d6ce1 |
Add an option to the archiver to add a section recording library dependencies.
* ar.c (long_options): Add --record-libdeps. (usage): Mention the new option. (decode_options): Handle the new option. (replace_members): If necessary, create a bfd to hold the libdeps description. * binemul.c (ar_emul_append_bfd): New function. (ar_emul_replace_bfd): New function. (ar_emul_default_append): Replace file_name and target arguments with new_bfd argument. (ar_emul_default_replace): Likewise. * binemul.h: Update prototypes. (struct bin_emulation_xfer_struct): Update fields. * doc/binutils.texi: Document the new option. * NEWS: Mention the new feature. * emul_aix.c (ar_emul_aix_append): Update. (ar_emul_aix_replace): Likewise. * testsuite/binutils-all/ar.exp: Add test of new feature. |
||
|
H.J. Lu
|
b0ab069373 |
x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker
GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 X86 ISA markers are updated: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 GNU_PROPERTY_X86_ISA_1_BASELINE is added and GNU_PROPERTY_X86_ISA_1_V[234] are updated: #define GNU_PROPERTY_X86_ISA_1_BASELINE (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 2) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 3) Add -z x86-64-baseline linker command line option to mark x86-64-baseline ISA level as needed. bfd/ PR gas/26703 * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_BASELINE for -z x86-64-baseline. binutils/ PR gas/26703 * readelf.c (decode_x86_isa): Handle * GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (output_insn): Update for GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/property-11.d: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_BASELINE): New. (GNU_PROPERTY_X86_ISA_1_V2): Uppdated. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-baseline. * ld.texi: Document -z x86-64-baseline. * emulparams/x86-64-level.sh: Handle -z x86-64-baseline. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-isa4. * testsuite/ld-i386/property-x86-isa4.d: New file. * testsuite/ld-x86-64/property-x86-isa4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa4.d: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-isa4 and property-x86-isa4-x32. |
||
|
H.J. Lu
|
76868f3606 |
dwarf: Also match abbrev base when searching abbrev list
A .debug_abbrev section can have multiple CUs. When caching abbrev list, we need to check abbrev base to support multiple CUs. PR binutils/26808 * dwarf.c (abbrev_list): Add abbrev_base. (new_abbrev_list): Add an abbrev_base argument and record it. (find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument and match it. (process_debug_info): Pass abbrev_base to new_abbrev_list and find_abbrev_list_by_abbrev_offset. (display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list and find_abbrev_list_by_abbrev_offset. * testsuite/binutils-all/x86-64/pr26808.dump: New file. * testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808 test. |
||
|
H.J. Lu
|
64ec7c3f80 |
binutils: Report error message on error
* testsuite/binutils-all/objcopy.exp (objcopy_test): Report error message on error. |
||
|
H.J. Lu
|
32930e4edb |
x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker
GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 Update GNU_PROPERTY_X86_ISA_1_XXX macros: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 in x86 ELF binaries to indicate that micro-architecture ISA levels required to execute the binary: #define GNU_PROPERTY_X86_ISA_1_NEEDED (GNU_PROPERTY_X86_UINT32_OR_LO + 2) #define GNU_PROPERTY_X86_ISA_1_USED (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 2) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 2) The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX. In addition to EM_X86_64, GNU_PROPERTY_X86_ISA_1_V[234] marker can be used by ld.so to detect the x86-64-v4 shared library placed in an x86-64-v2 directory by mistake on an x86-64-v2 machine to avoid crashes on x86-64-v4 instructions. Add -z x86-64-v[234] linker command line option to mark x86-64-v[234] ISA level as needed. Also add #define GNU_PROPERTY_X86_FEATURE_2_MASK (1U << 11) for mask registers. bfd/ PR gas/26703 * elf-linker-x86.h (elf_linker_x86_params): Add isa_level. * elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Merge GNU_PROPERTY_X86_ISA_1_V[234]. (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_V[234] for -z x86-64-v[234]. binutils/ PR gas/26703 * readelf.c (decode_x86_compat_2_isa): New function. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature_1): Handle GNU_PROPERTY_X86_FEATURE_2_MASK. (print_gnu_property_note): Handle X86_COMPAT_2_ISA_1_USED, and X86_COMPAT_2_ISA_1_NEEDED. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (xstate): Add xstate_mask. (md_assemble): Check i.types[j], instead of i.tm.operand_types[j], for xstate. Set xstate_mask, instead of xstate_zmm, for RegMask. (output_insn): Update for GNU_PROPERTY_X86_ISA_1_V[234]. Update xstate for mask register and VSIB. * testsuite/gas/i386/i386.exp: Run more GNU_PROPERTY tests. * testsuite/gas/i386/property-1.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED value. * testsuite/gas/i386/property-2.s: Only keep cmove. * testsuite/gas/i386/property-3.s: Changed to addsubpd. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-7.d: Likewise. * testsuite/gas/i386/x86-64-property-8.d: Likewise. * testsuite/gas/i386/x86-64-property-9.d: Likewise. * testsuite/gas/i386/property-11.d: New file. * testsuite/gas/i386/property-11.s: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/property-12.s: Likewise. * testsuite/gas/i386/property-13.d: Likewise. * testsuite/gas/i386/property-13.s: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-13.d: Likewise. * testsuite/gas/i386/x86-64-property-14.d: Likewise. * testsuite/gas/i386/x86-64-property-14.s: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): New. (GNU_PROPERTY_X86_ISA_1_USED): Likewise. (GNU_PROPERTY_X86_ISA_1_V2): Likewise. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MASK): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-v[234]. * ld.texi: Document -z x86-64-v[234]. * emulparams/elf32_x86_64.sh: Use x86-64-level.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/x86-64-level.sh: New file. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-6, property-x86-isa1, property-x86-isa2 and property-x86-isa3. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Likewise. * testsuite/ld-x86-64/property-x86-5b.s: Likewise. * testsuite/ld-i386/property-x86-6.d: New file. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-6-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-6.d: Likewise. * testsuite/ld-x86-64/property-x86-6.s: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.s: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/simple.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-6, property-x86-6-x32, property-x86-isa1, property-x86-isa1-x32, property-x86-isa2, property-x86-isa2-x32, property-x86-isa3-x32 and property-x86-isa3. |
||
Mark Wielaard
|
debd1a62c4 |
readelf: Show Unit Type for DWARF5
binutils/ChangeLog: * dwarf.c (process_debug_info): Print Unit Type for DWARF5. * testsuite/binutils-all/dw5.W: Adjust expected output. * testsuite/binutils-all/dwarf-attributes.W: Likewise. gas/ChangeLog: * testsuite/gas/elf/dwarf-5-cu.d: Adjust expected output. |
||
|
H.J. Lu
|
790147a9e9 |
Pass --disable-reloc-section on PE targets for PR 25662 test
Pass --disable-reloc-section on PE targets for PR 25662 test since
commit
|
||
Cooper Qu
|
0861f561eb |
CSKY: Support attribute section.
bfd
* elf32-csky.c (csky_archs): Fix arch names.
(csky_find_arch_with_name): New.
(elf32_csky_merge_attributes): New.
(csky_elf_merge_private_bfd_data): Add process of merge
attribute section.
(elf32_csky_obj_attrs_arg_type): New.
(elf32_csky_obj_attrs_handle_unknown): New.
(elf_backend_obj_attrs_vendor): Define.
(elf_backend_obj_attrs_section): Define.
(elf_backend_obj_attrs_arg_type): Define.
(elf_backend_obj_attrs_section_type): Define.
binutils/
* readelf.c (get_csky_section_type_name): New.
(get_section_type_name): Add handler for CSKY.
(display_csky_attribute): New.
(process_arch_specific): Add handler for CSKY.
* testsuite/binutils-all/strip-3.d: Remove .csky.attributes
section.
elfcpp/
* elfcpp.h (enum SHT): New enum SHT_CSKY_ATTRIBUTES.
gas/
* gas/config/tc-csky.c (md_begin): Set attributes.
(isa_flag): Change type to unsigned 64 bits.
(struct csky_cpu_info): Likewise.
(struct csky_macro_info): Likewise.
(set_csky_attribute): New.
* testsuite/gas/csky/802j.d: Ignore .csky.attributes section.
* testsuite/gas/csky/all.d: Likewise.
* testsuite/gas/csky/bsr1.d: Likewise.
* testsuite/gas/csky/csky_vdsp.d: Likewise.
* testsuite/gas/csky/cskyv2_all.d: Likewise.
* testsuite/gas/csky/cskyv2_ck803r2.d: Likewise.
* testsuite/gas/csky/cskyv2_ck860.d: Likewise.
* testsuite/gas/csky/cskyv2_dsp.d: Likewise.
* testsuite/gas/csky/cskyv2_elrw.d: Likewise.
* testsuite/gas/csky/cskyv2_float.d: Likewise.
* testsuite/gas/csky/enhance_dsp.d: Likewise.
* testsuite/gas/csky/java.d: Likewise.
* testsuite/gas/csky/v1_float.d: Likewise.
* testsuite/gas/csky/v2_float_part1.d: Likewise.
* testsuite/gas/csky/v2_float_part2.d: Likewise.
* testsuite/gas/csky/v2_tls_gd.d: Likewise.
* testsuite/gas/csky/v2_tls_ie.d: Likewise.
* testsuite/gas/csky/v2_tls_ld.d: Likewise.
* testsuite/gas/csky/v2_tls_le.d: Likewise.
* testsuite/gas/elf/elf.exp: Add handler for CSKY.
* testsuite/gas/elf/section2.e-csky: New.
include/
* elf/csky.h (SHT_CSKY_ATTRIBUTES): Define.
(Tag_CSKY_ARCH_NAME): New enum constant.
(Tag_CSKY_CPU_NAME): Likewise.
(Tag_CSKY_ISA_FLAGS): Likewise.
(Tag_CSKY_DSP_VERSION): Likewise.
(Tag_CSKY_VDSP_VERSION): Likewise.
(Tag_CSKY_FPU_VERSION): Likewise.
(Tag_CSKY_FPU_ABI): Likewise.
(Tag_CSKY_FPU_ROUNDING): Likewise.
(Tag_CSKY_FPU_DENORMAL): Likewise.
(Tag_CSKY_FPU_Exception): Likewise.
(Tag_CSKY_FPU_NUMBER_MODULE): Likewise.
(Tag_CSKY_FPU_HARDFP): Likewise.
(Tag_CSKY_MAX): Likewise.
(VAL_CSKY_DSP_VERSION_EXTENSION): Likewise.
(VAL_CSKY_DSP_VERSION_2): Likewise.
(VAL_CSKY_VDSP_VERSION_1): Likewise.
(VAL_CSKY_VDSP_VERSION_2): Likewise.
(VAL_CSKY_FPU_ABI_SOFT): Likewise.
(VAL_CSKY_FPU_ABI_SOFTFP): Likewise.
(VAL_CSKY_FPU_ABI_HARD): Likewise.
(VAL_CSKY_FPU_HARDFP_HALF): Likewise.
(VAL_CSKY_FPU_HARDFP_SINGLE): Likewise.
(VAL_CSKY_FPU_HARDFP_DOUBLE): Likewise.
* opcode/csky.h (CSKY_ISA_VDSP_V2): Define.
CSKYV1_ISA_E1: Change to long constant type.
CSKYV2_ISA_E1: Likewise.
CSKYV2_ISA_1E2: Likewise.
CSKYV2_ISA_2E3: Likewise.
CSKYV2_ISA_3E7: Likewise.
CSKYV2_ISA_7E10: Likewise.
CSKYV2_ISA_3E3R1: Likewise.
CSKYV2_ISA_3E3R2: Likewise.
CSKYV2_ISA_10E60: Likewise.
CSKY_ISA_TRUST: Likewise.
CSKY_ISA_CACHE: Likewise.
CSKY_ISA_NVIC: Likewise.
CSKY_ISA_CP: Likewise.
CSKY_ISA_MP: Likewise.
CSKY_ISA_MP_1E2: Likewise.
CSKY_ISA_JAVA: Likewise.
CSKY_ISA_MAC: Likewise.
CSKY_ISA_MAC_DSP: Likewise.
CSKY_ISA_DSP: Likewise.
CSKY_ISA_DSP_1E2: Likewise.
CSKY_ISA_DSP_ENHANCE: Likewise.
CSKY_ISA_FLOAT_E1: Likewise.
CSKY_ISA_FLOAT_1E2: Likewise.
CSKY_ISA_FLOAT_1E3: Likewise.
CSKY_ISA_FLOAT_3E4: Likewise.
CSKY_ISA_VDSP: Likewise.
ld/
* emulparams/cskyelf.sh: Support attribute section.
* testsuite/ld-csky/tls-le-v1.d: Match .csky.attributes section.
* ld/testsuite/ld-csky/tls-le.d: Likewise.
* testsuite/ld-elf/non-contiguous.ld: Ignore .csky.attributes
section.
opcodes/
* csky-dis.c (CSKY_DEFAULT_ISA): Define.
(csky_dis_info): Add member isa.
(csky_find_inst_info): Skip instructions that do not belong to
current CPU.
(csky_get_disassembler): Get infomation from attribute section.
(print_insn_csky): Set defualt ISA flag.
* csky.h (CSKY_ISA_VDSP_2): Rename from CSKY_ISA_VDSP_V2.
* csky-opc.h (struct csky_opcode): Change isa_flag16 and
isa_flag32'type to unsigned 64 bits.
|
||
John David Anglin
|
9e7ed8b080 |
Fix PR binutils/26356 on hppa*-*-hpux*.
PR 26356 * som.c (som_bfd_copy_private_section_data): Issue error when a subspace is specified without its containing space. * testsuite/binutils-all/objcopy.exp (objcopy --reverse-bytes): Add "-j $PRIVATE$" to command on hppa*-*-hpux*. * testsuite/lib/utils-lib.exp (default_binutils_run): Remove existing dollar-sign quotes before quoting. Do this prior to generating log output. |
||
|
Mark Wielaard
|
02391b8be4 |
Recognize DW_LANG_C11 in readelf testsuite.
readelf_wi_test checks the DW_AT_LANGUAGE is recognized by matching against ANSI C. But for the new DWARF5 DW_LANG_C11 readelf simply prints "C11", not prefixed with ANSI (DW_LANG_C is "non-ANSI C", DW_LANG_C89 is "ANSI C" and DW_LANG_C99 is "ANSI-C99"). Adjust the testcase instead of readelf because C11 seems a fine name. binutils/ChangeLog: * testsuite/binutils-all/readelf.exp (readelf_wi_test): Also recognize DW_LANG_C11. |
||
|
Alan Modra
|
fc0efc4bd7 |
Readelf demangling test typo
Using floating point data results in cris failing the test. * testsuite/binutils-all/mangled.s: Use dc.a rather than dc.d. |
||
|
Nick Clifton
|
79bc120c7b |
Add demangling support to readelf.
PR binutils/26331 * readelf.c (do_demangle): New option flag. (print_symbol): If do_demangle is enabled, demangle the symbol. (enum long_option_values): New enum to hold long option values. (options): Add demangle, no-demangle, recursion-limit and no-recursion-limit options. Alpha sort the table. (usage): Describe the new options. (parse_args): Handle the new options. * NEWS: Mention the new feature. * doc/binutils.texi: Document the new feature. * testsuite/binutils-all/readelf.exp: Test the new feature. * testsuite/binutils-all/mangled.s: New file - assembler source. * testsuite/binutils-all/readelf.demangled: New file - expected output from readelf. |
||
|
H.J. Lu
|
ac2599c447 |
x86: Pass --gdwarf-3 to assembler
Pass --gdwarf-3 to assembler for
commit
|
||
Maciej W. Rozycki
|
c77cb2a09c |
MIPS: Make the IRIX naming of local section symbols consistent
Make the MIPS/IRIX naming of local section symbols consistent between
files produced by generic ELF code and ELF linker code, complementing
commit
|
||
|
Maciej W. Rozycki
|
3f1b17bbf0 |
MIPS/LD: Set symtab's `sh_info' correctly for IRIX emulations
Correct ELF linker code so as to set the `sh_info' value of the static symbol table section according to the section symbols vs other symbols split where required by the selection of the IRIX compatibility mode for MIPS target. Add a `elf_backend_elfsym_local_is_section' hook for that purpose, returning TRUE if it is only STB_LOCAL/STT_SECTION symbols that are to be considered local for the purpose of this split rather than all STB_LOCAL symbols. We do it already in generic ELF code, and have done it since 1993, with the `elf_backend_sym_is_global' hook, affecting GAS and `objcopy', so these tools produce correct ELF output in the IRIX compatibility mode, however if such output is fed as input to `ld -r', then the linker's output is no longer valid for that mode. The relevant changes to generic ELF code are: commit |
||
|
Maciej W. Rozycki
|
3abf975826 |
MIPS/binutils/testsuite: Correct mips.exp test ABI/emul/endian arrangement
The binutils testsuite supports involving LD in processing test cases and with the MIPS target that has the same issues the LD testsuite does. So to support LD in the MIPS part of the binutils testsuite similarly to commit |
||
Nick Alcock
|
0b88415108 |
binutils, testsuite: allow compilation before doing run_dump_test
The CTF assembler emitted by GCC has architecture-dependent pseudos in it, and is (obviously) tightly tied to a particular set of C source files with specific types in them. The CTF tests do run_dump_test on some candidate input, link it using the run_dump_test ld machinery, and compare objdump --ctf output. To avoid skew, we'd like to be able to easily regenerate the .s being scanned so that the .c doesn't get out of sync with it, but since GCC emits arch-dependent pseudos, we are forced to hand-hack the output every time (quite severely on some arches, like x86-32 and -64, where every single pseudo used is not only arch-dependent but undocumented). To avoid this, teach run_dump_test how to optionally compile things given new, optional additional flags passed in in the cc option. Only sources with the .c suffix are compiled, so there is no effect on any existing tests. The .s files go into the tmpdir, from which existing run_dump_test code picks them up as usual. binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Add 'cc' option. |
||
Claudiu Zissulescu
|
570b0ed6d5 |
arc: Detect usage of illegal double register pairs
ARC can use odd-even double register pairs in some selected instructions. Although the GNU assembler doesn't allow even-odd registers to be used, there may be cases when the disassembler is presented with such situation. This patch add a test and detects such cases. opcodes/ 2020-07-14 Claudiu Zissulescu <claziss@gmail.com> * arc-dis.c (print_insn_arc): Detect and emit a warning when a faulty double register pair is detected. binutils/ 2020-07-14 Claudiu Zissulescu <claziss@gmail.com> * testsuite/binutils-all/arc/double_regs.s: New test. * testsuite/binutils-all/arc/objdump.exp: Add the above test. Signed-off-by: Claudiu Zissulescu <claziss@gmail.com> |
||
|
Alan Modra
|
7a34d0ea4d |
x86_64-cygwin tests
Tests just having "xfail: x86_64-*-cygwin" aren't good, since presumably if a test fails on x86_64-cygwin then it also fails on x86_64-*-pe* and x86_64-*-mingw*. binutils/ * testsuite/lib/binutils-common.exp (is_pecoff_format): Accept optional machine-os arg. ld/ * testsuite/ld-scripts/default-script1.d: Don't skip, xfail using is_pecoff_format. * testsuite/ld-scripts/default-script2.d: Likewise. * testsuite/ld-scripts/default-script3.d: Likewise. * testsuite/ld-scripts/default-script4.d: Likewise. * testsuite/ld-scripts/pr20302.d: Remove x86_64-*-cygwin from notarget. * testsuite/ld-scripts/provide-6.d: Remove x86_64-*-cygwin from xfail. * testsuite/ld-scripts/provide-8.d: Likewise. |