This new test fails on i686 buildbot slaves,
(gdb) core-file /home/gdb-buildbot-2/fedora-x86-64-2/fedora-i686/build/gdb/testsuite/gdb.arch/i386-biarch-core.core
"/home/gdb-buildbot-2/fedora-x86-64-2/fedora-i686/build/gdb/testsuite/gdb.arch/i386-biarch-core.core"
is not a core dump: File format not recognized
(gdb) FAIL: gdb.arch/i386-biarch-core.exp: core-file
There are two problems:
(1) The testcase did not really test if elf64-i386 is supported by GDB (BFD).
That was OK for a Fedora testcase but I forgot about it when submitting it
upstream.
I haven't really verified if the GNU target is elf64-little but it seems so,
no other one seems suitable from:
elf32-x86-64
elf64-big
elf64-k1om
elf64-l1om
elf64-little
elf64-x86-64
pei-x86-64
(2) The output of the "core-file" command itself can be arbitrary as the
elf64-i386 file with x86_64 registers is really broken; but that does not
matter much, important is the following test whether core file memory is
readable.
./configure --enable-64-bit-bfd
(gdb) core-file /home/jkratoch/redhat/gdb-test-build32-plus64/gdb/testsuite/gdb.arch/i386-biarch-core.core^M
warning: Couldn't find general-purpose registers in core file.^M
Failed to read a valid object file image from memory.^M
warning: Couldn't find general-purpose registers in core file.^M
#0 <unavailable> in ?? ()^M
(gdb) FAIL: gdb.arch/i386-biarch-core.exp: core-file
x/i 0x400078^M
0x400078: hlt ^M
(gdb) PASS: gdb.arch/i386-biarch-core.exp: .text is readable
I do not know much dejagnu but I expect 'istarget' tests against the site.exp
'target_triplet' content which is set to the primary GDB target
(--target=...).
GDB is normally never configured for primary target elf64-i386, I think BFD
does not know such explicit target, it gets recognized as elf64-little.
In fact many testfiles of the GDB testsuite are wrong as they require
'istarget' (therefore primary GDB target) even for just loading arch specific
files which would be sufficient with secondary target (--enable-targets=...)
support.
This my new patch removes this 'istarget' check as it is IMO unrelated to what
we need to test. Although you are right we do 'x/i' and test for 'hlt' so
I think we should test also for available 'set architecture i386'.
We could also test by 'x/bx' instead of 'x/i' to avoid such additional
test/requirement.
This testcase comes from a different bug from 2009:
https://bugzilla.redhat.com/show_bug.cgi?id=457187http://pkgs.fedoraproject.org/cgit/gdb.git/commit/?id=94cd124608bf0dd359cb48a710800d72c21b30c3
That bug has been fixed in the meantime but the same testcase was reproducing
this new different bug - internal error regression - so I submitted it.
We can remove the "x/bx $address" test but it was useful for the previous bug
from 2009 as that time the internal error regression did not happen, just the
core file was not recognized (which would not be detected by the proposed
ignoring of the "core-file" command output) and so the core file was not
available. That can be tested by the "x/bx $address" test.
gdb/testsuite/ChangeLog
2015-07-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-biarch-core.exp: Replace istarget
by "complete set gnutarget". Remove expectation for the "core-file"
command.
opcodes * arm-dis.c (print_insn_coprocessor): Added support for quarter
float bitfield format.
(coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
quarter float bitfield format.
tests * gas/arm/vfpv3-const-conv.d: Update expected result due to change
of comment for vmov reg,immediate with VFP coprocessor.
I noticed two failure in gdb.trace/mi-trace-frame-collected.exp:
FAIL: gdb.trace/mi-trace-frame-collected.exp: live:
-trace-frame-collected (register)
FAIL: gdb.trace/mi-trace-frame-collected.exp: tfile:
-trace-frame-collected (register)
In these cases, we are not collecting registers so the MI command
-trace-frame-collected should only give us the value of the PC.
However, it also gives us all of the single precision pseudo registers,
initialized with 0x0.
We can reproduce this error by simply issuing the
'maint print cooked-register' when no inferior is connected:
~~~
...
(gdb) maint print cooked-register
Name Nr Rel Offset Size Type Cooked value
x0 0 0 0 8 long <unavailable>
x1 1 1 8 8 long <unavailable>
...
d30 130 62 1540 8 *1 <unavailable>
d31 131 63 1548 8 *1 <unavailable>
s0 132 64 1556 4 *1 0x00000000
s1 133 65 1560 4 *1 0x00000000
s2 134 66 1564 4 *1 0x00000000
...
s28 160 92 1668 4 *1 0x00000000
s29 161 93 1672 4 *1 0x00000000
s30 162 94 1676 4 *1 0x00000000
s31 163 95 1680 4 *1 0x00000000
h0 164 96 1684 2 *1 <unavailable>
h1 165 97 1686 2 *1 <unavailable>
h2 166 98 1688 2 *1 <unavailable>
...
~~~
It turns out GDB does not check if S registers are valid before returning
a value for them. It should return <unavailable> in this case.
gdb/ChangeLog:
* aarch64-tdep.c (aarch64_pseudo_read_value): Mark S register as
unavailable if invalid.
New testcase.
gdb/testsuite/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Tests for validate symbol file using build-id.
* gdb.base/solib-mismatch-lib.c: New file.
* gdb.base/solib-mismatch-libmod.c: New file.
* gdb.base/solib-mismatch.c: New file.
* gdb.base/solib-mismatch.exp: New file.
Producer part of the new "build-id" XML attribute.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* features/library-list-svr4.dtd (library-list-svr4): New
'build-id' attribute.
gdb/doc/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* gdb.texinfo (Library List Format for SVR4 Targets): Add
'build-id' in description, example, new attribute in dtd.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
gdbserver build-id attribute generator.
* linux-low.c (nat/linux-maps.h, search.h, rsp-low.h): Include.
(ElfXX_Ehdr, ElfXX_Phdr, ElfXX_Nhdr): New.
(ELFXX_FLD, ELFXX_SIZEOF, ELFXX_ROUNDUP, BUILD_ID_INVALID): New.
(find_phdr): New.
(get_dynamic): Use find_pdhr to traverse program headers.
(struct mapping_entry, mapping_entry_s, free_mapping_entry_vec)
(compare_mapping_entry_range, struct find_memory_region_callback_data)
(read_build_id, find_memory_region_callback, lrfind_mapping_entry)
(get_hex_build_id): New.
(linux_qxfer_libraries_svr4): Add optional build-id attribute
to reply XML document.
This should be just a move with no changes.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Move linux_find_memory_regions_full & co.
* linux-tdep.c (nat/linux-maps.h): Include.
(gdb_regex.h): Remove the include.
(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
and target/target.h.
(struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
(linux_find_memory_regions_full): Move from linux-tdep.c.
* nat/linux-maps.h (read_mapping): New declaration.
(linux_find_memory_region_ftype, enum filterflags): Moved from
linux-tdep.c.
(linux_find_memory_regions_full): New declaration.
* target.c (target/target-utils.h): Include.
(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
definitions to target/target-utils.c.
* target.h (target_fileio_read_stralloc): Move it to target/target.h.
* target/target-utils.c (read_alloc, read_stralloc): Move definitions
from target.c.
* target/target-utils.h (read_alloc_pread_ftype): New typedef.
(read_alloc): New declaration.
(read_stralloc_func_ftype): New typedef.
(read_stralloc): New declaration.
* target/target.h (target_fileio_read_stralloc): Move it from target.h.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
* target.c: Include target/target-utils.h and fcntl.h.
(target_fileio_read_stralloc_1_pread, target_fileio_read_stralloc_1)
(target_fileio_read_stralloc): New functions.
Prepare code for move into gdb/common/.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Prepare linux_find_memory_regions_full & co. for move.
* linux-tdep.c (linux_find_memory_region_ftype): Comment.
(linux_find_memory_regions_full): Change signature and prepare
for moving to linux-maps.
(linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
(linux_find_memory_regions_thunk): New.
(linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
(linux_find_memory_regions_gdb): New.
(linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
(linux_make_mappings_corefile_notes): Use
linux_find_memory_regions_gdb.
* target.c (read_alloc_pread_ftype): New typedef.
(target_fileio_read_alloc_1_pread): New function.
(read_alloc): Refactor from target_fileio_read_alloc_1.
(read_stralloc_func_ftype): New typedef.
(target_fileio_read_alloc_1): New implementation. Use read_alloc.
(read_stralloc): Refactored from target_fileio_read_stralloc.
(target_fileio_read_stralloc): New implementation, use read_stralloc.
Later patches need regex support also in gdbserver.
gdb/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
The default compression is gABI compliant now. This patch makes the
x86 Linux assembler default to gABI compliant.
* config/tc-i386.c (flag_compress_debug): Replace
COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
Tracepoints and range stepping are independent features. This patch
skips the gdb.trace/range-stepping.exp test case if the target does not
support range stepping.
gdb/testsuite/ChangeLog:
* gdb.base/range-stepping.exp (gdb_range_stepping_enabled):
Move it to ...
* lib/range-stepping-support.exp (gdb_range_stepping_enabled):
... here.
* gdb.trace/range-stepping.exp: Check that the target supports
range stepping.
Fix the ARI warning about the use of unsigned long long. We can't use
ULONGEST as this is defined unsigned long on 64-bit systems. This will
result in a compile error when storing a pointer to an unsigned long long
structure field (declared in perf_event.h as __u64) in a ULONGEST * variable.
Use size_t to hold the buffer size inside GDB and __u64 when interfacing the
Linux kernel.
gdb/
* nat/linux-btrace.c (perf_event_read): Change the type of DATA_HEAD.
(perf_event_read_all): Change the type of SIZE and DATA_HEAD.
(perf_event_read_bts): Change the type of SIZE and READ.
(linux_enable_bts): Change the type of SIZE, PAGES, DATA_SIZE,
and DATA_OFFSET. Move DATA_SIZE declaration. Restrict the buffer size
to UINT_MAX. Check for overflows when using DATA_HEAD from the perf
mmap page.
(linux_enable_pt): Change the type of PAGES and SIZE. Restrict the
buffer size to UINT_MAX.
(linux_read_bts): Change the type of BUFFER_SIZE, SIZE, DATA_HEAD, and
DATA_TAIL.
* nat/linux-btrace.h (struct perf_event_buffer)<size, data_head>
<last_head>: Change type.
* common/btrace-common.h (struct btrace_dat_pt) <size>: Change type.
* common/btrace-common.c (btrace_data_append): Change the type of
SIZE.
* btrace.c (parse_xml_raw): Change the type of SIZE. Change oddness
check.
Extends existing support for namespaces/modules in C++/Fortran/Java to
include language_d too. However unlike Fortran/C++, the separator for
qualified names is a single dot.
2015-07-14 Iain Buclaw <ibuclaw@gdcproject.org>
* dwarf2read.c (find_slot_in_mapped_hash): Extend language support to
also test for language_d.
(dwarf2_compute_name): Likewise.
(read_func_scope): Likewise.
(read_structure_type): Likewise.
(determine_prefix): Likewise.
(read_import_statement): Use dot as the separator for language_d.
(typename_concat): Likewise, but don't prefix the D main function.
All programs in binutils+gdb git repo now support gABI compression
with the SHF_COMPRESSED bit. This patch makes the zlib-gabi option
as compression default for gas, gold, ld and objcopy, instead of the
zlib-gnu option whose outputs are incompatible with gABI.
binutils/
* objcopy.c (copy_file): Set BFD_COMPRESS_GABI if not
zlib-gnu.
* doc/binutils.texi: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
binutils/testsuite/
* binutils-all/compress.exp: Update.
gas/
* as.c (parse_args): Make --compress-debug-sections and
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* doc/as.texinfo: Change --compress-debug-sections and
--compress-debug-sections=zlib to zlib-gabi.
gold/
* compressed_output.cc (Output_compressed_section::set_final_data_size):
Make --compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
Expect ".debug_.*" with the SHF_COMPRESSED bit, instead of
".zdebug_".
* testsuite/Makefile.in: Regenerated.
ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Make
--compress-debug-sections=zlib the same as
--compress-debug-sections=zlib-gabi.
* ld.texinfo: Change --compress-debug-sections=zlib to zlib-gabi.
ld/testsuite/
* ld-elf/zlibbegin.rS: Updated to .debug_.* with the
SHF_COMPRESSED bit.
* ld-elf/zlibnormal.rS: Likewise.
Sync with GCC
2015-05-13 Eric Botcazou <ebotcazou@adacore.com>
* sjlj.m4: New file.
2015-05-04 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* bitfields.m4: Change int to long long, and use bitfields of
width 1 instead of 0.
2015-05-01 Trevor Saunders <tbsaunde+gcc@tbsaunde.org>
* bitfields.m4: New file.
2015-04-14 H.J. Lu <hongjiu.lu@intel.com>
* bootstrap-mpx.mk: New file.
2015-03-25 Uros Bizjak <ubizjak@gmail.com>
PR bootstrap/65537
* bootstrap-lto-noplugin.mk: New build configuration.
2014-11-13 Kirill Yukhin <kirill.yukhin@intel.com>
* target-posix: New file.
2014-10-27 Tom Tromey <tromey@redhat.com>
* gcc-plugin.m4: New file.
* nat/linux-namespaces.c (setns): Rename from this ...
(do_setns): ... to this. Support calling setns if it exists.
(mnsh_handle_setns): Call do_setns.
Sync with GCC
2015-06-02 Jason Merrill <jason@redhat.com>
PR bootstrap/66319
* configure.ac: Use -std=gnu++98.
2015-05-28 Mike Frysinger <vapier@gentoo.org>
* configure.ac (--vtable-verify): Use AS_HELP_STRING for help.
* configure: Regenerate.
2015-05-11 Paulo Matos <paulo@matos-sorge.com>
* configure.ac: Fix typo.
* configure: Regenerate.
2015-05-03 Matthias Klose <doko@ubuntu.com>
* configure.ac: Match $host configured with triplets.
* configure: Regenerate.
2015-04-17 Jakub Jelinek <jakub@redhat.com>
PR bootstrap/62077
* configure.ac (--enable-stage1-checking): Default to
release,misc,gimple,rtlflag,tree,types if --disable-checking
or --enable-checking is not specified and DEV-PHASE is not
experimental.
* configure: Regenerated.
2015-03-27 Uros Bizjak <ubizjak@gmail.com>
Install back PR target/47230 fix (Revert the revert).
config/
Sync with GCC
* mh-alpha-linux: Restored.
This exercises the case of the inferior disappearing while GDB is
debugging it, such as something doing "kill -9 PID" while the program
is stopped under GDB or GDBserver. This triggered a set of internal
errors, fixed by previous patches.
gdb/testsuite/ChangeLog:
2015-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/killed-outside.exp: New file.
* gdb.base/killed-outside.c: New file.
If the process disappears (e.g., killed with "kill -9" from the shell)
while it was stopped under GDBserver's control, and the GDBserver
tries to kill it, GDBserver asserts:
(gdb) shell kill -9 23084
(gdb) kill
...
Killing process(es): 23084
/home/pedro/gdb/mygit/src/gdb/gdbserver/linux-low.c:972: A problem internal to GDBserver has been detected.
kill_wait_lwp: Assertion `res > 0' failed.
...
gdb/gdbserver/ChangeLog:
2015-07-14 Pedro Alves <palves@redhat.com>
* linux-low.c (kill_wait_lwp): Don't assert if waitpid fails.
Instead, ignore ECHILD, and throw an error for other errnos.
When I examine the buildbot fails, I see this fail on
native-extended-gdbserver,
Attaching to process 13529^M
"target:/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/attach-pie-noexec (deleted)": could not open as an executable file: No such file or directory^M
(gdb) FAIL: gdb.base/attach-pie-noexec.exp: attach
if I run tests with board file unix, it doesn't exist,
Attaching to process 13869^M
/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/gdb.base/attach-pie-noexec (deleted): No such file or directory.^M
(gdb) PASS: gdb.base/attach-pie-noexec.exp: attach
the test expects to see the period at the end of the error message,
gdb_test "attach $testpid" "Attaching to process $testpid\r\n.*: No such file or directory\\." "attach"
however the period is missing when running with native-extended-gdbserver.
in exec.c:exec_file_attach, GDB has two places may throw errors [1] and [2],
if (load_via_target)
{
...
}
else
{
...
if (scratch_chan < 0)
perror_with_name (filename); <--- [1]
}
...
if (!exec_bfd)
{
error (_("\"%s\": could not open as an executable file: %s"), <-- [2]
scratch_pathname, bfd_errmsg (bfd_get_error ()));
}
perror_with_name [1] append a period at the end of error message,
but error [2] doesn't. This fix is to add a period at the end of the
error message. Note that this fail is shown up on 7.9 release as well.
gdb:
2015-07-13 Yao Qi <yao.qi@linaro.org>
* exec.c (exec_file_attach): Add period at the end of error
message.
Share the window name completion code from the focus command with the
winheight command, providing window name completion for the winheight
command.
gdb/ChangeLog:
* tui/tui-win.c (window_name_completer): New function.
(focus_completer): Call window_name_completer. All old content
moved into window_name_completer.
(winheight_completer): New function.
(_initialize_tui_win): Rename variable. Add completer to
winheight command. Update doc string on winheight.
