Make gdbserver's build system locate libiconv when building for Linux.
Commit 07b3255c3b ("Filter invalid encodings from Linux thread names")
make libiconv madantory for building gdbserver on Linux.
While trying to cross-compile gdb for xtensa-fsf-linux-uclibc (with a
toolchain generated with crosstool-ng), I got:
/home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:48:10: fatal error: iconv.h: No such file or directory
48 | #include <iconv.h>
| ^~~~~~~~~
I downloaded GNU libiconv, built it for that host, and installed it in
an arbitrary directory. I had to modify the gdbserver build system to
locate libiconv and use it, the result is this patch.
I eventually found that crosstool-ng has a config option to make uclibc
provide an implementation of iconv, which is of course much easier. But
given that this patch is now written, I think it would be worth merging
it, it could help some people who do not have iconv built-in their libc
in the future (and may not have the luxury of rebuilding their libc like
I do).
Using AM_ICONV in configure.ac adds these options for configure (the
same we have for gdb):
--with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
--without-libiconv-prefix don't search for libiconv in includedir and libdir
--with-libiconv-type=TYPE type of library to search for (auto/static/shared)
It sets the `LIBICONV` variable with whatever is needed to link with
libiconv, and adds the necessary `-I` flag to `CPPFLAGS`.
To avoid unnecessarily linking against libiconv on hosts that don't need
it, set `MAYBE_LIBICONV` with the contents of `LIBICONV` only if the
host is Linux, and use `MAYBE_LIBICONV` in `Makefile.in`.
Since libiconv is a hard requirement for Linux hosts, error out if it is
not found.
The bits in acinclude.m4 are similar to what we have in
gdb/acinclude.m4.
Update the top-level build system to support building against an in-tree
libiconv (I did not test this part though). Something tells me that the
all-gdbserver dependency on all-libiconv is unnecessary, since there is
already a dependency of configure-gdbserver on all-libiconv (and
all-gdbserver surely depends on configure-gdbserver). I just copied
what's done for GDB though.
ChangeLog:
* Makefile.def: Add configure-gdbserver and all-gdbserver
dependencies on all-libiconv.
* Makefile.in: Re-generate.
Change-Id: I90f8ef88dd4917df5a68b45550d93622fc9cfed4
Approved-By: Tom Tromey <tom@tromey.com>
This commit is the result of the following actions:
- Running gdb/copyright.py to update all of the copyright headers to
include 2024,
- Manually updating a few files the copyright.py script told me to
update, these files had copyright headers embedded within the
file,
- Regenerating gdbsupport/Makefile.in to refresh it's copyright
date,
- Using grep to find other files that still mentioned 2023. If
these files were updated last year from 2022 to 2023 then I've
updated them this year to 2024.
I'm sure I've probably missed some dates. Feel free to fix them up as
you spot them.
This patch proposes to require a C++17 compiler to build gdb /
gdbsupport / gdbserver. Before this patch, GDB required a C++11
compiler.
The general policy regarding bumping C++ language requirement in GDB (as
stated in [1]) is:
Our general policy is to wait until the oldest compiler that
supports C++NN is at least 3 years old.
Rationale: We want to ensure reasonably widespread compiler
availability, to lower barrier of entry to GDB contributions, and to
make it easy for users to easily build new GDB on currently
supported stable distributions themselves. 3 years should be
sufficient for latest stable releases of distributions to include a
compiler for the standard, and/or for new compilers to appear as
easily installable optional packages. Requiring everyone to build a
compiler first before building GDB, which would happen if we
required a too-new compiler, would cause too much inconvenience.
See the policy proposal and discussion
[here](https://sourceware.org/ml/gdb-patches/2016-10/msg00616.html).
The first GCC release which with full C++17 support is GCC-9[2],
released in 2019[3], which is over 4 years ago. Clang has had C++17
support since Clang-5[4] released in 2018[5].
A discussions with many distros showed that a C++17-able compiler is
always available, meaning that this no hard requirement preventing us to
require it going forward.
[1] https://sourceware.org/gdb/wiki/Internals%20GDB-C-Coding-Standards#When_is_GDB_going_to_start_requiring_C.2B-.2B-NN_.3F
[2] https://gcc.gnu.org/projects/cxx-status.html#cxx17
[3] https://gcc.gnu.org/gcc-9/
[4] https://clang.llvm.org/cxx_status.html
[5] https://releases.llvm.org/
Change-Id: Id596f5db17ea346e8a978668825787b3a9a443fd
Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Approved-By: Tom Tromey <tom@tromey.com>
Approved-By: Pedro Alves <pedro@palves.net>
This commit is the result of running the gdb/copyright.py script,
which automated the update of the copyright year range for all
source files managed by the GDB project to be updated to include
year 2023.
This commit aims to not make use of -Wmissing-prototypes when
compiling with g++.
Use of -Wmissing-prototypes was added with this commit:
commit a0761e34f0
Date: Wed Mar 11 15:15:12 2020 -0400
gdb: enable -Wmissing-prototypes warning
Because clang can provide helpful warnings with this flag.
Unfortunately, g++ doesn't accept this flag, and will give this
warning:
cc1plus: warning: command line option ‘-Wmissing-prototypes’ is valid for C/ObjC but not for C++
In theory the fact that this flag is not supported should be detected
by the configure check in gdbsupport/warning.m4, but for users of
ccache, this check doesn't work due to a long standing ccache issue:
https://github.com/ccache/ccache/issues/738
The ccache problem is that -W... options are reordered on the command
line, and so -Wmissing-prototypes is seen before -Werror. Usually
this doesn't matter, but the above warning (about the flag not being
valid) is issued before the -Werror flag is processed, and so is not
fatal.
There have been two previous attempts to fix this that I'm aware of.
The first is:
https://sourceware.org/pipermail/gdb-patches/2021-September/182148.html
In this attempt, instead of just relying on a compile to check if a
flag is valid, the proposal was to both compile and link. As linking
doesn't go through ccache, we don't suffer from the argument
reordering problem, and the link phase will correctly fail when using
-Wmissing-prototypes with g++. The configure script will then disable
the use of this flag.
This approach was rejected, and the suggestion was to only add the
-Wmissing-prototypes flag if we are compiling with gcc.
The second attempt, attempts this approach, and can be found here:
https://sourceware.org/pipermail/gdb-patches/2021-November/183076.html
This attempt only adds the -Wmissing-prototypes flag is the value of
GCC is not 'yes'. This feels like it is doing the right thing,
unfortunately, the GCC flag is really a 'is gcc like' flag, not a
strict, is gcc check. As such, GCC is set to 'yes' for clang, which
would mean the flag was not included for clang or gcc. The entire
point of the original commit was to add this flag for clang, so
clearly the second attempt is not sufficient either.
In this new attempt I have added gdbsupport/compiler-type.m4, this
file defines AM_GDB_COMPILER_TYPE. This macro sets the variable
GDB_COMPILER_TYPE to either 'gcc', 'clang', or 'unknown'. In future
the list of values might be extended to cover other compilers, if this
is ever useful.
I've then modified gdbsupport/warning.m4 to only add the problematic
-Wmissing-prototypes flag if GDB_COMPILER_TYPE is not 'gcc'.
I've tested this with both gcc and clang and see the expected results,
gcc no longer attempts to use the -Wmissing-prototypes flag, while
clang continues to use it.
When compiling using ccache, I am no longer seeing the warning.
This commit brings all the changes made by running gdb/copyright.py
as per GDB's Start of New Year Procedure.
For the avoidance of doubt, all changes in this commits were
performed by the script.
These dirs don't use automake, so use AC_CONFIG_MACRO_DIRS to specify
../config as a search dir for m4 macros. This allows removal of a lot
of hand-written m4_include's from acinclude.m4 files, and simplifies
use of `aclocal` or `autoreconf` as manual -I is not needed.
This commits the result of running gdb/copyright.py as per our Start
of New Year procedure...
gdb/ChangeLog
Update copyright year range in copyright header of all GDB files.
Run autoupdate on gdbserver/configure.ac and then tweak it to use easier
to read indentation. This removes a few warnings when running
`autoreconf -vf -Wall`.
* Replace AC_INIT with AC_INIT and no arguments plus AC_CONFIG_SRCDIR.
* Replace AC_GNU_SOURCE with AC_USE_SYSTEM_EXTENSIONS.
* Replace AC_TRY_COMPILE with AC_COMPILE_IFELSE.
* Replace AC_TRY_LINK with AC_LINK_IFELSE.
autoupdate gets it right, except this one here:
--- a/gdbserver/configure.ac
+++ b/gdbserver/configure.ac
@@ -304,7 +304,7 @@ if test "$srv_linux_thread_db" = "yes"; then
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]], [[]])],[found="-Wl,--dynamic-list"
RDYNAMIC='-Wl,--dynamic-list=$(srcdir)/proc-service.list'],[RDYNAMIC="-rdynamic"
LDFLAGS="$old_LDFLAGS $RDYNAMIC"
- AC_TRY_LINK([], [],
+ _au_m4_changequote([,])AC_TRY_LINK([], [],
[found="-rdynamic"],
[found="no"
RDYNAMIC=""])])
... which I had to convert manually.
The changes in the generated configure file only contain insignificant
whitespace changes, so that gives confidence that the conversion is
correct.
gdbserver/ChangeLog:
* configure.ac: Modernize.
* configure: Re-generate.
Change-Id: Ia769aaec2aafac595504f477da955e91dffa4d8f
`autoreconf -Wall` notes that AC_CANONICAL_SYSTEM is obsolete:
configure.ac:36: warning: The macro `AC_CANONICAL_SYSTEM' is obsolete.
Replace it by AC_CANONICAL_BUILD, AC_CANONICAL_HOST and
AC_CANONICAL_TARGET in configure.ac files in gdb, gdbserver and
gdbsupport. All three macros may not be needed everywhere, but it is
hard to completely audit the configure files to see which are required,
so I think it's better (and that there's no downside) to just call all
three.
gdb/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure.ac: Use AC_CANONICAL_{BUILD,HOST,TARGET} instead of
AC_CANONICAL_SYSTEM.
* configure: Re-generate.
Change-Id: Ifd0e21f1e478634e768b5de1b8ee06a7f690d863
The original configure-time tests in gdb/ and gdbserver/ failed to
detect that 'socklen_t' is defined in MinGW headers because the test
program included only sys/socket.h, which is absent in MinGW system
headers. However on MS-Windows this data type is declared in another
header, ws2tcpip.h. The modified test programs try using ws2tcpip.h
if sys/socket.h is unavailable.
Thanks to Joel Brobecker who helped me regenerate the configure
scripts and the config.in files.
gdb/ChangeLog:
2020-07-26 Eli Zaretskii <eliz@gnu.org>
* configure.ac (AC_CHECK_HEADERS): Check for sys/socket.h and
ws2tcpip.h. When checking whether socklen_t type is defined, use
ws2tcpip.h if it is available and sys/socket.h isn't.
* configure: Regenerate.
* config.in: Regenerate.
gdbserver/ChangeLog:
2020-07-26 Eli Zaretskii <eliz@gnu.org>
* configure.ac (AC_CHECK_HEADERS): Add ws2tcpip.h.
When checking whether socklen_t type is defined, use ws2tcpip.h if
it is available and sys/socket.h isn't.
* configure: Regenerate.
* config.in: Regenerate.
This port has been unmaintained for years, remove it.
gdbserver/ChangeLog:
* configure: Re-generate.
* configure.ac: Remove srv_qnx test.
* configure.srv: Remove nto case.
* nto-low.cc, nto-low.h, nto-x86-low.cc: Remove.
* remote-utils.c: Remove __QNX__-guarded code.
Change-Id: I8a1ad9c740a69352da1f6993778dbf951eebb22f
This port has been unmaintained for years, remove it.
gdbserver/ChangeLog:
* configure: Re-generate.
* configure.ac: Remove srv_lynxos test.
* configure.srv: Remove lynxos cases.
* lynx-i386-low.cc, lynx-low.cc, lynx-low.h, lynx-ppc-low.c:
Remove.
Change-Id: I239d1cf1fc7b4c7a174251bc7981707eaba7d972
I recently stumbled on this code mentioning Linux kernel 2.6.25, and
thought it could be time for some spring cleaning (newer GDBs probably
don't need to supports 12-year old kernels). I then found that the
"legacy" case is probably broken anyway, which gives an even better
motivation for its removal.
In short, this patch removes the configure checks that check if
user_regs_struct contains the fs_base/gs_base fields and adjusts all
uses of the HAVE_STRUCT_USER_REGS_STRUCT_{FS,GS}_BASE macros. The
longer explanation/rationale follows.
Apparently, Linux kernels since 2.6.25 (that's from 2008) have been
reliably providing fs_base and gs_base as part of user_regs_struct.
Commit df5d438e33d7 in the Linux kernel [1] seems related. This means
that we can get these values by reading registers with PTRACE_GETREGS.
Previously, these values were obtained using a separate
PTRACE_ARCH_PRCTL ptrace call.
First, I'm not even sure the configure check was really right in the
first place.
The user_regs_struct used by GDB comes from
/usr/include/x86_64-linux-gnu/sys/user.h (or equivalent on other
distros) and is provided by glibc. glibc has had the fs_base/gs_base
fields in there for a very long time, at least since this commit from
2001 [2]. The Linux kernel also has its version of user_regs_struct,
which I think was exported to user-space at some point. It included the
fs_base/gs_base fields since at least this 2002 commit [3]. In any
case, my conclusion is that the fields were there long before the
aforementioned Linux kernel commit. The kernel commit didn't add these
fields, it only made sure that they have reliable values when obtained
with PTRACE_GETREGS.
So, checking for the presence of the fs_base/gs_base fields in struct
user_regs_struct doesn't sound like a good way of knowing if we can
reliably get the fs_base/gs_base values from PTRACE_GETREGS. My guess
is that if we were using that strategy on a < 2.6.25 kernel, things
would not work correctly:
- configure would find that the user_regs_struct has the fs_base/gs_base
fields (which are probided by glibc anyway)
- we would be reading the fs_base/gs_base values using PTRACE_GETREGS,
for which the kernel would provide unreliable values
Second, I have tried to see how things worked by forcing GDB to not use
fs_base/gs_base from PTRACE_GETREGS (forcing it to use the "legacy"
code, by configuring with
ac_cv_member_struct_user_regs_struct_gs_base=no ac_cv_member_struct_user_regs_struct_fs_base=no
Doing so breaks writing registers back to the inferior. For example,
calling an inferior functions gives an internal error:
(gdb) p malloc(10)
/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408: internal-error: invalid i387 regnum 152
The relevant last frames where this error happens are:
#8 0x0000563123d262fc in internal_error (file=0x563123e93fd8 "/home/smarchi/src/binutils-gdb/gdb/i387-tdep.c", line=1408, fmt=0x563123e94482 "invalid i387 regnum %d") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:55
#9 0x0000563123047d0d in i387_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/i387-tdep.c:1408
#10 0x0000563122c69e8a in amd64_collect_xsave (regcache=0x5631269453f0, regnum=152, xsave=0x7ffd38402a20, gcore=0) at /home/smarchi/src/binutils-gdb/gdb/amd64-tdep.c:3448
#11 0x0000563122c5e94c in amd64_linux_nat_target::store_registers (this=0x56312515fd10 <the_amd64_linux_nat_target>, regcache=0x5631269453f0, regnum=152) at /home/smarchi/src/binutils-gdb/gdb/amd64-linux-nat.c:335
#12 0x00005631234c8c80 in target_store_registers (regcache=0x5631269453f0, regno=152) at /home/smarchi/src/binutils-gdb/gdb/target.c:3485
#13 0x00005631232e8df7 in regcache::raw_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:765
#14 0x00005631232e8f0c in regcache::cooked_write (this=0x5631269453f0, regnum=152, buf=0x56312759e468 "@\225\372\367\377\177") at /home/smarchi/src/binutils-gdb/gdb/regcache.c:778
#15 0x00005631232e75ec in regcache::restore (this=0x5631269453f0, src=0x5631275eb130) at /home/smarchi/src/binutils-gdb/gdb/regcache.c:283
#16 0x0000563123083fc4 in infcall_suspend_state::restore (this=0x5631273ed930, gdbarch=0x56312718cf20, tp=0x5631270bca90, regcache=0x5631269453f0) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9103
#17 0x0000563123081eed in restore_infcall_suspend_state (inf_state=0x5631273ed930) at /home/smarchi/src/binutils-gdb/gdb/infrun.c:9151
The problem seems to be that amd64_linux_nat_target::store_registers
calls amd64_native_gregset_supplies_p to know whether gregset provides
fs_base. When !HAVE_STRUCT_USER_REGS_STRUCT_FS_BASE,
amd64_native_gregset_supplies_p returns false. store_registers
therefore assumes that it must be an "xstate" register. This is of
course wrong, and that leads to the failed assertion when
i387_collect_xsave doesn't recognize the register.
amd64_linux_nat_target::store_registers could probably be fixed to
handle this case, but I don't think it's worth it, given that it would
only be to support very old kernels.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5d438e33d7fc914ba9b6e0d6b019a8966c5fcc
[2] https://sourceware.org/git/?p=glibc.git;a=commit;h=c9cf6ddeebb7bb
[3] https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=88e4bc32686ebd0b1111a94f93eba2d334241f68
gdb/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* amd64-nat.c (amd64_native_gregset_reg_offset): Adjust.
* amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers,
amd64_linux_nat_target::store_registers, ps_get_thread_area, ): Adjust.
gdbserver/ChangeLog:
* configure.ac: Remove check for fs_base/gs_base in
user_regs_struct.
* configure: Re-generate.
* config.in: Re-generate.
* linux-x86-low.cc (x86_64_regmap, x86_fill_gregset,
x86_store_gregset): Adjust.
This changes the gdbserver build to use the gdbsupport that was built
for gdb.
gdbserver and gdbreplay now must use WIN32APILIBS (aka -lws2_32).
Before this change, gdbserver did not define USE_WIN32API when
building gdbsupport, but now this is always done.
ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def (gdbserver): Depend on gdbsupport.
gdbserver/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (GDBSERVER_DEPFILES): Remove srv_selftest_objs.
(WIN32APILIBS): New subst.
* Makefile.in (SFILES, OBS, TAGS, GDBREPLAY_OBS): Remove
gdbsupport files.
(gdbsupport/%.o): Remove target.
(GDBSUPPORT_BUILDDIR, GDBSUPPORT): New variables.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Add GDBSUPPORT.
(WIN32APILIBS): New variable.
(gdbserver$(EXEEXT)): Add WIN32APILIBS.
(gdbreplay$(EXEEXT)): Likewise.
gdbserver uses gdb's alloc.c, and this in turn can include headers
from intl via gdbsupport/gdb_locale.h. This can cause build failures
in some situations, for example if you build gdb and gdbserver on
mingw.
This patch restores the gdbsupport dependency on intl, and changes
gdbserver to use ZW_GNU_GETTEXT_SISTER_DIR. This fixes this build
problem.
ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def (gdbsupport): Depend on intl.
gdbserver/ChangeLog
2020-03-12 Tom Tromey <tom@tromey.com>
* config.in, configure: Rebuild.
* configure.ac: Call ZW_GNU_GETTEXT_SISTER_DIR.
* acinclude.m4: Include gettext-sister.m4.
* Makefile.in (top_builddir, INTL, INTL_DEPS, INTL_CFLAGS): New
variables.
(INCLUDE_CFLAGS): Add INTL_CFLAGS.
(gdbserver$(EXEEXT), gdbreplay$(EXEEXT)): Use INTL_DEPS, INTL.
The same is done for gdb, gdbserver and gdbsupport. I therefore think
it makes sense to move that to GDB_AC_COMMON.
It is required to move the call to GDB_AC_COMMON so it is before
GDB_AC_SELFTEST in gdbserver/configure.ac, otherwise the $development
variable isn't set when the code behind GDB_AC_SELFTEST executes.
gdb/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* selftest.m4: Modify comment.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure.ac: Don't source bfd/development.sh, move
GDB_AC_COMMON higher.
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure.ac: Don't source bfd/development.sh.
* common.m4: Source bfd/development.sh.
* configure: Re-generate.
This changes gdbserver so that it no longer builds its own gnulib and
libiberty. Instead, it now relies on the ones that were already built
at the top level.
gdbsupport is still built specially for gdbserver. This is more
complicated and will be tackled in a subsequent patch.
ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* Makefile.in: Rebuild.
* Makefile.def: Make gdbserver require gnulib and libiberty.
gdbserver/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* acinclude.m4: Don't include acx_configure_dir.m4.
* Makefile.in (LIBIBERTY_BUILDDIR, GNULIB_BUILDDIR): Update.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): Remove.
(all, install-only, uninstall, clean-info, clean)
(maintainer-clean): Don't recurse.
(subdir_do, all-lib): Remove.
($(LIBGNU) $(LIBIBERTY) $(GNULIB_H)): Remove rule.
(GNULIB_H): Remove.
(generated_files): Update.
($(GNULIB_BUILDDIR)/Makefile): Remove rule.
* configure: Rebuild.
* configure.ac: Don't configure gnulib or libiberty.
(GNULIB): Update.
gdbsupport/ChangeLog
2020-02-14 Tom Tromey <tom@tromey.com>
* common-defs.h: Change path to gnulib/config.h.
Change-Id: I469cbbf5db2ab37109c058e9e3a1e4f4dabdfc98
For the same reasons outlined in the previous patch, this patch renames
gdbserver source files to .cc.
I have moved the "-x c++" switch to only those rules that require it.
gdbserver/ChangeLog:
* Makefile.in: Rename source files from .c to .cc.
* %.c: Rename to %.cc.
* configure.ac: Rename server.c to server.cc.
* configure: Re-generate.
This patch moves gdbserver to the top level.
This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport. Changing this will
be done in a separate patch.
[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score. This makes
sense, because there is apparently not actually a gdbserver port here.
[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.
[v4] This version adds documentation and removes some unnecessary
top-level dependencies.
[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.
Tested by the buildbot.
ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.
gdb/ChangeLog
2020-02-07 Tom Tromey <tom@tromey.com>
* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.
Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
