is the first inferior.
(startup_inferior): If the target support multi-process, tell it
to resume only the new process.
* linux-nat.c (num_lwps): Delete global.
(purge_lwp_list): New function.
(num_lwps): New function.
(add_lwp, delete_lwp): Adjust.
(ptid_match): New.
(iterate_over_lwps): Add filter argument. Handle it.
(linux_nat_attach): Remove FIXME note.
(linux_nat_detach): Adjust to iterate over threads of the inferior
we're detaching from. Adjust to num_lwps being a function. Don't
assume the head of the lwp list is the main thread of the process
we're detaching from. Don't destroy the LWP list.
(resume_callback): Add debug output.
(linux_nat_resume): Handle resuming a single inferior. Allow a
wildcard resume in non-stop mode.
(linux_handle_extended_wait): Don't assume inferior_ptid is the
correct inferior of the parent LWP.
(status_callback): Also check lp->waitstatus.
(select_event_lwp): Add new filter parameter. Handle it.
(linux_nat_filter_event): Adjust to num_lwps being a function.
(linux_nat_wait_1): When adding the first lwp of the inferior, use
an is_lwp check instead of checking for the number of lwps.
(linux_nat_wait_1): Handle waiting for a specific tgid. Handle
pending process exit statuses.
(linux_nat_mourn_inferior): Don't destroy all the LWP info.
Instead delete LWPs of the inferior that we're mourning. Don't
unregister from the event loop here.
(linux_nat_pid_to_str): Use `num_lwps'.
(linux_nat_make_corefile_notes): Adjust to walk over lwps of a
single inferior.
(linux_nat_is_async_p): Check if async was masked out.
(linux_multi_process): New global.
(linux_nat_supports_multi_process): New.
(linux_nat_stop_lwp): Remove LWP filtering. It is done by the
caller.
(linux_nat_stop): Adjust to make iterate_over_lwps itself do the
LWP filtering.
(linux_nat_close): New.
(linux_nat_add_target): Register linux_nat_close and
linux_nat_supports_multi_process.
* linux-nat.h (iterate_over_lwps): Add filter argument.
* linux-thread-db.c (thread_db_handle): Delete.
(proc_handle, thread_agent, td_init_p, td_ta_new_p)
(td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
(td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
(td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
(td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
longer globals, moved to...
(struct thread_db_info): ... this new structure.
(thread_db_list): New.
(add_thread_db_info, get_thread_db_info, delete_thread_db_info):
New.
(have_threads_callback): Filter out threads of all inferiors but
the one specified by the ARGS argument.
(have_threads): Add ptid argument specifying the inferior we're
interested in. Handle it.
(struct thread_get_info_inout): New.
(thread_get_info_callback, thread_from_lwp): Adjust to use it.
(thread_db_attach_lwp): Check that inferior of the passed in
thread is using thread-db. Adjust.
(enable_thread_event): Remove thread_agent parameter. Instead,
get it from the per-inferior thread-db info.
(dladdr_to_soname): Move higher up.
(enable_thread_event_reporting): Adjust to use per-inferior
thread-db info.
(try_thread_db_load_1): Replace `handle' parameter by a
thread_db_info parameter. Adjust to use per-inferior thread-db
info.
(try_thread_db_load): Adjust to use per-inferior thread-db info.
(thread_db_load, disable_thread_event_reporting): Ditto.
(check_for_thread_db): Remove conditional reporting of which
libthread_db is in use.
(thread_db_new_objfile): Add comment about inferior_ptid.
(attach_thread): Adjust to use per-inferior thread-db info.
(thread_db_detach): Adjust to use per-inferior thread-db info.
Remove thread event breakpoints of the current inferior. Only
unpush the thread-db target if there are no more processes using
it.
(check_event): Adjust to use per-inferior thread-db info.
(thread_db_wait): Adjust to use per-inferior thread-db info. Only
unpush the thread-db target if there are no more processes using
it.
(thread_db_mourn_inferior): Adjust to use per-inferior thread-db
info. Mark breakpoints of the current inferior out before
deleting them. Only unpush the thread-db target if there are no
more processes using it.
(find_new_threads_callback): Adjust to use per-inferior thread_db
info.
(thread_db_find_new_threads_1): Add new ptid argument. Adjust to
use per-inferior thread-db info.
(thread_db_find_new_threads): Adjust to use per-inferior thread-db
info.
(thread_db_get_thread_local_address): Adjust.
(thread_db_get_ada_task_ptid): Adjust.
* inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
if there no more processes left to debug.
* thread.c (set_running, set_executing): Handle resuming all
threads of a single inferior.
* mi/mi-interp.c (mi_output_running_pid): New.
(mi_inferior_count): New.
(mi_on_resume): For backwards compatibility, if resuming all
threads of an inferior, and there is only one inferior, output
"all".
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
(mi_interpreter_init): Register the above.
* solib.c (clear_solib): Notify solib unload.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
disable breakpoints on a.out targets.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Do no print
^running here.
(mi_on_resume): Print ^running if not previously output.
* mi/mi-main.c (running_result_record_printed): New.
(captured_mi_execute_command): Reset
running_result_record_printed. Use running_result_record_printed
to decide if we should skip ^done.
(mi_execute_async_cli_command): Don't print ^running here.
* mi/mi-main.h (current_token, running_result_record_printed):
Declare.
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
* interps.c (clear_interpreter_hooks): Do not clear
deprecated_registers_changed_hook.
* regcache.c (registers_changed): Do not call it.
* top.c (deprecated_registers_changed_hook): Do not define it.
* mi/mi-interp.c (mi_command_loop): Do not clear it.
* tui/tui-hooks.c (tui_install_hooks): Do not install it.
(tui_remove_hooks): Do not remove it.
(tui_selected_frame_level_changed_hook): Check for negative level.
Use get_selected_frame.
(tui_registers_changed_hook): Deleted.
* interps.c (interp_set): Check for a NULL "old_interp".
Index: mi/ChangeLog
2003-08-08 Andrew Cagney <cagney@redhat.com>
* mi-main.c (captured_mi_execute_command): Add "mi2" and "mi3" to
interpreters that hack around CLI.
* mi-interp.c (mi3_command_loop): New function.
(mi_interpreter_resume): Check for "mi3", default to "mi2".
* interps.c (clear_interpreter_hooks): Convert function definition
to ISO C.
Index: mi/ChangeLog
2003-02-09 Andrew Cagney <ac131313@redhat.com>
* mi-interp.c (mi_remove_notify_hooks): Convert function
definition to ISO C.
