mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2025-01-12 12:16:04 +08:00
Code Issues Packages Projects Releases Wiki Activity
97,197 Commits 387 Branches 135 Tags 595 MiB
4da037ef9d
Commit Graph

560 Commits

Author SHA1 Message Date
Alan Modra
506b86a4f5 binutils testsuite strip-13 test 
The strip-13 test runs into difficulty using dc.a on some targets.
dc.a writes a power of 2 number of bytes large enough to contain a
target address.  On some targets, eg. avr-elf, this can be 2 bytes but
the ELF format used require words of 4 bytes to make up a relocation
entry.  There was a hack in the test, duplicating the reloc type into
what is normally the addend to make the test work when little-endian,
but that hack fails for similar big-endian targets.

This patch fixes that problem by arranging to emit 32-bit and 64-bit
ELF relocs using .4byte and .8byte directives, chosen as appropriate
for the ELF size.  I've also bumped the reloc number tested to a
higher unused value, and made the number more easily parameterised by
target should that be necessary in the future.  Whether REL or RELA
relocs are used is now chosen by a new is_rela readelf test of an
object file, rather than by lists of targets.

	* testsuite/lib/binutils-common.exp (is_elf64): Use directory of
	input file for readelf.out.
	(is_rela): New proc.
	* testsuite/binutils-all/objcopy.exp (elf64): Set new variable
	from first result of is_elf64 test.
	(reloc_format): Set using is_rela.
	(strip-13): Pass RELOC and ELF64 to assembler.
	(strip-14, strip-15): Use elf64 rather than calling is_elf64 again.
	* testsuite/binutils-all/strip-13.d: Run for more targets.
	* testsuite/binutils-all/strip-13mips64.s: Use RELOC and set
	addend to zero.
	* testsuite/binutils-all/strip-13rel.s: Use RELOC and ELF64.
	Don't add _NONE reloc.
	* testsuite/binutils-all/strip-13rela.s: Likewise.
 2018-08-18 13:46:32 +09:30
H.J. Lu
9c973a29df Always use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE 
For GNU_PROPERTY_STACK_SIZE, pr_datasz is the same as align_size, which
is 8 bytes for 64-bit ELF binaries and 4 bytes for 32-bit ELF binaries,
Use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE to convert
.note.gnu.property section.

bfd/

	PR binutils/23494
	* elf-properties.c (elf_get_gnu_property_section_size): Always
	use align_size as pr_datasz for GNU_PROPERTY_STACK_SIZE.
	(elf_write_gnu_properties): Likewise.

binutils/

	PR binutils/23494
	* testsuite/binutils-all/x86-64/pr23494c.s: New file.
	* testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494e.d: Likewise.
 2018-08-10 08:14:24 -07:00
H.J. Lu
11459a79d9 Skip PR binutils/23494 tests for nacl targets 
PR binutils/23494 tests pass "-O elf64-x86-64" and "-O elf32-x86-64"
to objcopy which may not supported for nacl targets.  This patch skips
these tests for nacl targets.

	* testsuite/binutils-all/x86-64/pr23494a-x32.d: Skip nacl
	targets.
	* testsuite/binutils-all/x86-64/pr23494a.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494b.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494c.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
 2018-08-10 07:53:50 -07:00
H.J. Lu
6404ab9937 Convert .note.gnu.property section between ELF32 and ELF64 
.note.gnu.property section has different alignments and section
sizes for 32-bit and 64-bit ELF binaries.  This patch updated
bfd_convert_section_size and bfd_convert_section_contents to
properly convert .note.gnu.property section between 32-bit and
64-bit ELF binaries.

bfd/

	PR binutils/23494
	* bfd.c (bfd_convert_section_size): Check BFD_DECOMPRESS after
	calling _bfd_elf_convert_gnu_property_size to convert
	.note.gnu.property section size.
	(bfd_convert_section_contents): Check BFD_DECOMPRESS after
	calling _bfd_elf_convert_gnu_properties to convert
	.note.gnu.property section.
	* elf-bfd.h (_bfd_elf_convert_gnu_property_size): New prototype.
	(_bfd_elf_convert_gnu_properties): Likewise.
	* elf-properties.c (elf_get_gnu_property_section_size): New
	function.
	(elf_write_gnu_properties): Likewise.
	(_bfd_elf_convert_gnu_property_size): Likewise.
	(_bfd_elf_convert_gnu_properties): Likewise.
	(_bfd_elf_link_setup_gnu_properties): Use
	elf_get_gnu_property_section_size and elf_write_gnu_properties.

binutils/

	PR binutils/23494
	* testsuite/binutils-all/x86-64/pr23494a-x32.d: New file.
	* testsuite/binutils-all/x86-64/pr23494a.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494a.s: Likewise.
	* testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494b.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494b.s: Likewise.
	* testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494c.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/pr23494d.d: Likewise.
 2018-08-08 21:00:18 -07:00
Alan Modra
7b8d9e8cec PR23431, Messages composed from pieces can't be properly translated 
PR 23431
	* dwarf.c (display_formatted_table): Replace "what" parameter
	with "is_dir".  Expand messages.  Fix capitalisation.
	* testsuite/binutils-all/dw5.W: Update expected output.
 2018-07-24 19:59:11 +09:30
Alan Modra
be570f0684 xgate testsuite fixes 
binutils/
	* testsuite/lib/binutils-common.exp (supports_gnu_unique): Return
	zero for xgate.
ld/
	* testsuite/lib/ld-lib.exp (check_gc_sections_available): Return 0
	for xgate.
	* testsuite/ld-elf/elf.exp: Add xgate to pr21703 xfails.
	* testsuite/ld-elf/shared.exp: Add xgate to pr21703 xfails.
	* testsuite/ld-discard/extern.d: xfail xgate.
	* testsuite/ld-discard/start.d: Likewise.
	* testsuite/ld-discard/static.d: Likewise.
	* testsuite/ld-elf/attributes.d: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group1.d: Likewise.
	* testsuite/ld-elf/group3b.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/merge2.d: Likewise.
	* testsuite/ld-elf/merge3.d: Likewise.
	* testsuite/ld-elf/orphan-10.d: Likewise.
	* testsuite/ld-elf/orphan-9.d: Likewise.
	* testsuite/ld-elf/orphan-region.d: Likewise.
	* testsuite/ld-elf/orphan.d: Likewise.
	* testsuite/ld-elf/orphan3.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr14156b.d: Likewise.
	* testsuite/ld-elf/pr17550c.d: Likewise.
	* testsuite/ld-elf/pr17550d.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr20528a.d: Likewise.
	* testsuite/ld-elf/pr20528b.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/ld-elf/pr22836-1a.d: Likewise.
	* testsuite/ld-elf/pr22836-1b.d: Likewise.
	* testsuite/ld-elf/pr349.d: Likewise.
	* testsuite/ld-elf/warn1.d: Likewise.
	* testsuite/ld-elf/warn2.d: Likewise.
	* testsuite/ld-elf/warn3.d: Likewise.
 2018-07-10 23:59:59 +09:30
Alan Modra
0034eed03a Run a few more binutils tests non-native 
Setting CC_FOR_TARGET from the environment CC was just plain wrong,
and no doubt the reason these tests were only run natively.

	* testsuite/binutils-all/compress.exp (test_gnu_debuglink): Don't
	set CC_FOR_TARGET.  Run test non-native.
	* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
	Likewise.
	(test_follow_debuglink): Run test non-native.
 2018-05-31 12:00:11 +09:30
Ant Bikeneev
1869e86f2e Add option to ar's 't' command to display the offset of elements within the archive. 
PR 23107
	* ar.c (display_offsets): New variable.
	(usage): Add description of 'O' operator.
	(decode_option): Handle 'O' operator.
	(print_descr): Pass display_offsets to print_arelt_descr.
	* arsup.c: Update call to printy_arelt_descr.
	* objdump.c: Likewise.
	* bucomm.c (print_arelt_descr): If offsets parameter is true then
	display offset of archive element within the archive.
	* bucomm.h: Update prototype for print_arelt_descr.
	* doc/binutils.texi: Update description of ar command.
	* NEWS: Mention the new feature.
	* testsuite/binutils-all/ar.exp: Add text of new feature.
 2018-05-30 17:08:03 +01:00
Alan Modra
bb3b531633 PR23235, make check uses system installed ld 
This patch doesn't stop the build-id and debuglink tests using the
installed ld, it just prevents a compiler failure from resulting in a
test fail.  We could move the tests to the ld testsuite but it doesn't
seem all that important.

	PR 23235
	* testsuite/binutils-all/compress.exp (test_gnu_debuglink): Return
	unsupported rather than fail on compile errors.
	* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
	Likewise.  Save and restore CFLAGS_FOR_TARGET.
 2018-05-28 21:43:44 +09:30
John Darrington
7b4ae82428 Add support for the Freescale s12z processor. 
bfd	* Makefile.am: Add s12z files.
	* Makefile.in: Regenerate.
	* archures.c: Add bfd_s12z_arch.
	* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
	* bfd-in2.h: Regenerate.
	* config.bfd: Add s12z target.
	* configure.ac: Add s12z target.
	* configure: Regenerate.
	* cpu-s12z.c: New file.
	* elf32-s12z.c: New file.
	* libbfd.c (bfd_putb24): New function.
	(bfd_putl24): New function.
	* libbfd.h: Regenerate.
	* reloc.c: Add s12z relocations.
	(bfd_get_reloc_size): Handle size 5 relocs.
	* targets.c: Add s12z_elf32_vec.

opcodes	* Makefile.am: Add support for s12z architecture.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* s12z-dis.c: New file.
	* s12z.h: New file.

include	* elf/s12z.h: New header.

ld	* Makefile.am: Add support for s12z architecture.
	* configure.tgt: Likewise.
	* Makefile.in: Regenerate.
	* emulparams/m9s12zelf.sh: New file.
	* scripttempl/elfm9s12z.sc: New file.
	* testsuite/ld-discard/static.d: Expect to fail for the s12z
	target.
	* testsuite/ld-elf/endsym.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
	* testsuite/ld-elf/sec64k.exp: Likewise.
	* testsuite/ld-s12z: New directory.
	* testsuite/ld-s12z/opr-linking.d: New file.
	* testsuite/ld-s12z/opr-linking.s: New file.
	* testsuite/ld-s12z/relative-linking.d: New file.
	* testsuite/ld-s12z/relative-linking.s: New file.
	* testsuite/ld-s12z/z12s.exp: New file.

gas	* Makefile.am: Add support for s12z target.
	* Makefile.in: Regenerate.
	* NEWS: Mention the new support.
	* config/tc-s12z.c: New file.
	* config/tc-s12z.h: New file.
	* configure.tgt: Add  s12z support.
	* doc/Makefile.am: Likewise.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Add s12z documentation.
	* doc/as.textinfo: Likewise.
	* doc/c-s12z.texi: New file.
	* testsuite/gas/s12z: New directory.
	* testsuite/gas/s12z/abs.d: New file.
	* testsuite/gas/s12z/abs.s: New file.
	* testsuite/gas/s12z/adc-imm.d: New file.
	* testsuite/gas/s12z/adc-imm.s: New file.
	* testsuite/gas/s12z/adc-opr.d: New file.
	* testsuite/gas/s12z/adc-opr.s: New file.
	* testsuite/gas/s12z/add-imm.d: New file.
	* testsuite/gas/s12z/add-imm.s: New file.
	* testsuite/gas/s12z/add-opr.d: New file.
	* testsuite/gas/s12z/add-opr.s: New file.
	* testsuite/gas/s12z/and-imm.d: New file.
	* testsuite/gas/s12z/and-imm.s: New file.
	* testsuite/gas/s12z/and-opr.d: New file.
	* testsuite/gas/s12z/and-opr.s: New file.
	* testsuite/gas/s12z/and-or-cc.d: New file.
	* testsuite/gas/s12z/and-or-cc.s: New file.
	* testsuite/gas/s12z/bfext-special.d: New file.
	* testsuite/gas/s12z/bfext-special.s: New file.
	* testsuite/gas/s12z/bfext.d: New file.
	* testsuite/gas/s12z/bfext.s: New file.
	* testsuite/gas/s12z/bit-manip.d: New file.
	* testsuite/gas/s12z/bit-manip.s: New file.
	* testsuite/gas/s12z/bit.d: New file.
	* testsuite/gas/s12z/bit.s: New file.
	* testsuite/gas/s12z/bra-expression-defined.d: New file.
	* testsuite/gas/s12z/bra-expression-defined.s: New file.
	* testsuite/gas/s12z/bra-expression-undef.d: New file.
	* testsuite/gas/s12z/bra-expression-undef.s: New file.
	* testsuite/gas/s12z/bra.d: New file.
	* testsuite/gas/s12z/bra.s: New file.
	* testsuite/gas/s12z/brclr-symbols.d: New file.
	* testsuite/gas/s12z/brclr-symbols.s: New file.
	* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
	* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
	* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
	* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
	* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
	* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
	* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
	* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
	* testsuite/gas/s12z/clb.d: New file.
	* testsuite/gas/s12z/clb.s: New file.
	* testsuite/gas/s12z/clr-opr.d: New file.
	* testsuite/gas/s12z/clr-opr.s: New file.
	* testsuite/gas/s12z/clr.d: New file.
	* testsuite/gas/s12z/clr.s: New file.
	* testsuite/gas/s12z/cmp-imm.d: New file.
	* testsuite/gas/s12z/cmp-imm.s: New file.
	* testsuite/gas/s12z/cmp-opr-inc.d: New file.
	* testsuite/gas/s12z/cmp-opr-inc.s: New file.
	* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
	* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
	* testsuite/gas/s12z/cmp-opr-reg.d: New file.
	* testsuite/gas/s12z/cmp-opr-reg.s: New file.
	* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
	* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
	* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
	* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
	* testsuite/gas/s12z/cmp-opr-xys.d: New file.
	* testsuite/gas/s12z/cmp-opr-xys.s: New file.
	* testsuite/gas/s12z/cmp-s-imm.d: New file.
	* testsuite/gas/s12z/cmp-s-imm.s: New file.
	* testsuite/gas/s12z/cmp-s-opr.d: New file.
	* testsuite/gas/s12z/cmp-s-opr.s: New file.
	* testsuite/gas/s12z/cmp-xy.d: New file.
	* testsuite/gas/s12z/cmp-xy.s: New file.
	* testsuite/gas/s12z/com-opr.d: New file.
	* testsuite/gas/s12z/com-opr.s: New file.
	* testsuite/gas/s12z/complex-shifts.d: New file.
	* testsuite/gas/s12z/complex-shifts.s: New file.
	* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
	* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
	* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
	* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
	* testsuite/gas/s12z/dbCC.d: New file.
	* testsuite/gas/s12z/dbCC.s: New file.
	* testsuite/gas/s12z/dec-opr.d: New file.
	* testsuite/gas/s12z/dec-opr.s: New file.
	* testsuite/gas/s12z/dec.d: New file.
	* testsuite/gas/s12z/dec.s: New file.
	* testsuite/gas/s12z/div.d: New file.
	* testsuite/gas/s12z/div.s: New file.
	* testsuite/gas/s12z/eor.d: New file.
	* testsuite/gas/s12z/eor.s: New file.
	* testsuite/gas/s12z/exg.d: New file.
	* testsuite/gas/s12z/exg.s: New file.
	* testsuite/gas/s12z/ext24-ld-xy.d: New file.
	* testsuite/gas/s12z/ext24-ld-xy.s: New file.
	* testsuite/gas/s12z/inc-opr.d: New file.
	* testsuite/gas/s12z/inc-opr.s: New file.
	* testsuite/gas/s12z/inc.d: New file.
	* testsuite/gas/s12z/inc.s: New file.
	* testsuite/gas/s12z/inh.d: New file.
	* testsuite/gas/s12z/inh.s: New file.
	* testsuite/gas/s12z/jmp.d: New file.
	* testsuite/gas/s12z/jmp.s: New file.
	* testsuite/gas/s12z/jsr.d: New file.
	* testsuite/gas/s12z/jsr.s: New file.
	* testsuite/gas/s12z/ld-imm-page2.d: New file.
	* testsuite/gas/s12z/ld-imm-page2.s: New file.
	* testsuite/gas/s12z/ld-imm.d: New file.
	* testsuite/gas/s12z/ld-imm.s: New file.
	* testsuite/gas/s12z/ld-immu18.d: New file.
	* testsuite/gas/s12z/ld-immu18.s: New file.
	* testsuite/gas/s12z/ld-large-direct.d: New file.
	* testsuite/gas/s12z/ld-large-direct.s: New file.
	* testsuite/gas/s12z/ld-opr.d: New file.
	* testsuite/gas/s12z/ld-opr.s: New file.
	* testsuite/gas/s12z/ld-s-opr.d: New file.
	* testsuite/gas/s12z/ld-s-opr.s: New file.
	* testsuite/gas/s12z/ld-small-direct.d: New file.
	* testsuite/gas/s12z/ld-small-direct.s: New file.
	* testsuite/gas/s12z/lea-immu18.d: New file.
	* testsuite/gas/s12z/lea-immu18.s: New file.
	* testsuite/gas/s12z/lea.d: New file.
	* testsuite/gas/s12z/lea.s: New file.
	* testsuite/gas/s12z/mac.d: New file.
	* testsuite/gas/s12z/mac.s: New file.
	* testsuite/gas/s12z/min-max.d: New file.
	* testsuite/gas/s12z/min-max.s: New file.
	* testsuite/gas/s12z/mod.d: New file.
	* testsuite/gas/s12z/mod.s: New file.
	* testsuite/gas/s12z/mov.d: New file.
	* testsuite/gas/s12z/mov.s: New file.
	* testsuite/gas/s12z/mul-imm.d: New file.
	* testsuite/gas/s12z/mul-imm.s: New file.
	* testsuite/gas/s12z/mul-opr-opr.d: New file.
	* testsuite/gas/s12z/mul-opr-opr.s: New file.
	* testsuite/gas/s12z/mul-opr.d: New file.
	* testsuite/gas/s12z/mul-opr.s: New file.
	* testsuite/gas/s12z/mul-reg.d: New file.
	* testsuite/gas/s12z/mul-reg.s: New file.
	* testsuite/gas/s12z/mul.d: New file.
	* testsuite/gas/s12z/mul.s: New file.
	* testsuite/gas/s12z/neg-opr.d: New file.
	* testsuite/gas/s12z/neg-opr.s: New file.
	* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
	* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
	* testsuite/gas/s12z/opr-18u.d: New file.
	* testsuite/gas/s12z/opr-18u.s: New file.
	* testsuite/gas/s12z/opr-expr.d: New file.
	* testsuite/gas/s12z/opr-expr.s: New file.
	* testsuite/gas/s12z/opr-ext-18.d: New file.
	* testsuite/gas/s12z/opr-ext-18.s: New file.
	* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
	* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
	* testsuite/gas/s12z/opr-idx3-reg.d: New file.
	* testsuite/gas/s12z/opr-idx3-reg.s: New file.
	* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
	* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
	* testsuite/gas/s12z/opr-indirect-expr.d: New file.
	* testsuite/gas/s12z/opr-indirect-expr.s: New file.
	* testsuite/gas/s12z/opr-symbol.d: New file.
	* testsuite/gas/s12z/opr-symbol.s: New file.
	* testsuite/gas/s12z/or-imm.d: New file.
	* testsuite/gas/s12z/or-imm.s: New file.
	* testsuite/gas/s12z/or-opr.d: New file.
	* testsuite/gas/s12z/or-opr.s: New file.
	* testsuite/gas/s12z/p2-mul.d: New file.
	* testsuite/gas/s12z/p2-mul.s: New file.
	* testsuite/gas/s12z/page2-inh.d: New file.
	* testsuite/gas/s12z/page2-inh.s: New file.
	* testsuite/gas/s12z/psh-pul.d: New file.
	* testsuite/gas/s12z/psh-pul.s: New file.
	* testsuite/gas/s12z/qmul.d: New file.
	* testsuite/gas/s12z/qmul.s: New file.
	* testsuite/gas/s12z/rotate.d: New file.
	* testsuite/gas/s12z/rotate.s: New file.
	* testsuite/gas/s12z/s12z.exp: New file.
	* testsuite/gas/s12z/sat.d: New file.
	* testsuite/gas/s12z/sat.s: New file.
	* testsuite/gas/s12z/sbc-imm.d: New file.
	* testsuite/gas/s12z/sbc-imm.s: New file.
	* testsuite/gas/s12z/sbc-opr.d: New file.
	* testsuite/gas/s12z/sbc-opr.s: New file.
	* testsuite/gas/s12z/shift.d: New file.
	* testsuite/gas/s12z/shift.s: New file.
	* testsuite/gas/s12z/simple-shift.d: New file.
	* testsuite/gas/s12z/simple-shift.s: New file.
	* testsuite/gas/s12z/single-ops.d: New file.
	* testsuite/gas/s12z/single-ops.s: New file.
	* testsuite/gas/s12z/specd6.d: New file.
	* testsuite/gas/s12z/specd6.s: New file.
	* testsuite/gas/s12z/st-large-direct.d: New file.
	* testsuite/gas/s12z/st-large-direct.s: New file.
	* testsuite/gas/s12z/st-opr.d: New file.
	* testsuite/gas/s12z/st-opr.s: New file.
	* testsuite/gas/s12z/st-s-opr.d: New file.
	* testsuite/gas/s12z/st-s-opr.s: New file.
	* testsuite/gas/s12z/st-small-direct.d: New file.
	* testsuite/gas/s12z/st-small-direct.s: New file.
	* testsuite/gas/s12z/st-xy.d: New file.
	* testsuite/gas/s12z/st-xy.s: New file.
	* testsuite/gas/s12z/sub-imm.d: New file.
	* testsuite/gas/s12z/sub-imm.s: New file.
	* testsuite/gas/s12z/sub-opr.d: New file.
	* testsuite/gas/s12z/sub-opr.s: New file.
	* testsuite/gas/s12z/tfr.d: New file.
	* testsuite/gas/s12z/tfr.s: New file.
	* testsuite/gas/s12z/trap.d: New file.
	* testsuite/gas/s12z/trap.s: New file.

binutils* readelf.c: Add support for s12z architecture.
	* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
	targets.
 2018-05-18 15:26:18 +01:00
Alan Modra
679ca9753b Recognize more targets as ELF for testing 
Also use the correct rel strip-13 variant for more ARM targets.

	* testsuite/lib/binutils-common.exp (is_elf_format): Add chorus,
	cloudabi, fuchsia, kaos and nto.  Merge netbsdelf* into *elf*,
	and *uclinux* into *linux*.
	* testsuite/binutils-all/objcopy.exp: Accept armeb for rel
	strip-13 test, exclude arm-vxworks and arm-windiss.
 2018-05-15 21:04:13 +09:30
Francois H. Theron
fe944acf8f This patch adds support to objdump for disassembly of NFP (Netronome Flow Processor) ELF files (.nffw) as well as some basic readelf support. 
bfd	* Makefile.am: Added NFP files to build.
	* archures.c: Added bfd_arch_nfp
	* config.bfd: Added NFP support.
	* configure.ac: Added NFP support.
	* cpu-nfp.c: New, for NFP support.
	* elf-bfd.h: Added elf_section_info()
	* elf64-nfp.c: New, for NFP support.
	* po/SRC-POTFILES.in: Added NFP source files.
	* targets.c: Added nfp_elf64_vec
	* bfd-in2.h: Regenerate.
	* Makefile.in: Regenerate.
	* configure: Regenerate.

binutils* readelf.c: Very basic support for EM_NFP and its section types.
	* testsuite/binutils-all/nfp: New directory.
	* testsuite/binutils-all/nfp/objdump.exp: New file.  Run new
	tests.
	* testsuite/binutils-all/nfp/test2_ctx8.d: New file.
	* testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file.
	* testsuite/binutils-all/nfp/test1.d: New file.
	* testsuite/binutils-all/nfp/nfp6000.nffw: New file.
	* testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file.
	* NEWS: Mention the new support.

include	* dis-asm.h: Added print_nfp_disassembler_options prototype.
	* elf/common.h: Added EM_NFP, officially assigned. See Google Group
	Generic System V Application Binary Interface.
	* elf/nfp.h: New, for NFP support.
	* opcode/nfp.h: New, for NFP support.

opcodes	Makefile.am: Added nfp-dis.c.
	configure.ac: Added bfd_nfp_arch.
	disassemble.h: Added print_insn_nfp prototype.
	disassemble.c: Added ARCH_nfp and call to print_insn_nfp
	nfp-dis.c: New, for NFP support.
	po/POTFILES.in: Added nfp-dis.c to the list.
	Makefile.in: Regenerate.
	configure: Regenerate.
 2018-04-30 17:02:59 +01:00
Maciej W. Rozycki
6d9dabbbc6 testsuite: Support filtering targets by TCL procedure in `run_dump_test' 
Implement a more complex way of selecting targets to include or exclude
with `run_dump_test' cases, by extending the syntax for the `target',
`not-target', `skip' and `not-skip' options (with the binutils and GAS
test suites) and the `target', `alltargets' and `notarget' options (with
the LD test suite) to also accept a name of a TCL procedure instead of a
target triplet glob matching expression.  The result, 1 or 0, of the
procedure determines whether the test is to be run or not.  This mimics
and expands `dg-require-effective-target' from the GCC test suite.

Names of TCL procedures are supplied in square brackets `[]' as with TCL
procedure calls, observing that target triplet glob matching expressions
do not normally start and end with matching square brackets both at a
time.  Arguments for procedures are allowed if required.

Having a way to specify a complex condition for a `run_dump_test' case
to run has the advantage of keeping it local within the test case itself
where tool options related to the check might be also present, removing
the need to wrap `run_dump_test' calls into an `if' block whose only
reason is to do a feature check, and ultimately lets one have the test
reported as UNSUPPORTED automagically if required (not currently
supported by the `run_dump_test' options used for LD).

	binutils/
	* testsuite/lib/binutils-common.exp (match_target): New procedure.
	* testsuite/lib/utils-lib.exp (run_dump_test): Use it in place
	of `istarget' for matching with `target', `not-target', `skip'
	and `not-skip' options.

	gas/
	* testsuite/lib/gas-defs.exp (run_dump_test): Use `match_target'
	in place of `istarget' for matching with `target', `not-target',
	`skip' and `not-skip' options.

	ld/
	* testsuite/lib/ld-lib.exp (run_dump_test): Use `match_target'
	in place of `istarget' for matching with `target', `alltargets'
	and `notarget' options.
 2018-04-27 15:25:20 +01:00
Nick Clifton
0df8ad28f0 Extend the assembler so that it can automatically generate GNU Build attribute notes if none are present in the input files. 
gas	* as.c (flag_generate_build_notes): New variable.
	(show_usage): Add entry for --generate-missing-build-notes.
	(parse_args): Parse --generate-missing-build-notes.
	* as.h: Export flag_generate_build_notes.
	* symbols.c (save_symbol_name): Ensure that the name parameter is
	not NULL.
	* write.c (create_obj_attrs_section): Reformat.
	(create_note_reloc): New function - creates a relocation for a
	field in a GNU Build attribute note.
	(maybe_generate_build_notes): New function - created GNU Build
	attribute notes if none are present in the output file.
	(write_object_file): Call maybe_generate_build_notes.
	* configure.ac (--enable-generate-build-notes): New option.
	* NEWS: Announce the new feature.
	* doc/as.textinfo: Document the new option.
	* config.in: Regenerate.
	* configure: Regenerate.

binutils* readelf.c (is_32bit_abs_reloc): Support R_PARISC_DIR32 as a
	32-bit absolute reloc for the HPPA target.
	* testsuite/binutils-all/note-5.d: New test.
	* testsuite/binutils-all/note-5.s: Source file for new test.
	* testsuite/binutils-all/objcopy.exp: Run new test.
 2018-04-26 15:12:42 +01:00
Christophe Lyon
f1ac0afe48 [ARM] FDPIC: Update testsuite so that many tests pass with arm*-uclinuxfdpiceabi. 
2018-04-25  Christophe Lyon  <christophe.lyon@st.com>

	binutils/
	* testsuite/binutils-all/elfedit-2.d: Accept arm*-*-uclinuxfdpiceabi.
	* testsuite/binutils-all/elfedit-3.d: Likewise.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/binutils-all/strip-3.d: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.

	ld/
	* testsuite/ld-arm/export-class.exp: Accept arm*-*-uclinuxfdpiceabi.
	* testsuite/ld-discard/discard.exp: Likewise.
	* testsuite/ld-elf/binutils.exp: Likewise.
	* testsuite/ld-elf/commonpage1.d: Likewise.
	* testsuite/ld-elf/compress1c.d: Likewise.
	* testsuite/ld-elf/compressed1b.d: Likewise.
	* testsuite/ld-elf/compressed1c.d: Likewise.
	* testsuite/ld-elf/compressed1e.d: Likewise.
	* testsuite/ld-elf/dynamic1.d: Likewise.
	* testsuite/ld-elf/dynsym1.d: Likewise.
	* testsuite/ld-elf/ehdr_start-missing.d: Likewise.
	* testsuite/ld-elf/ehdr_start-shared.d: Likewise.
	* testsuite/ld-elf/ehdr_start-userdef.d: Likewise.
	* testsuite/ld-elf/ehdr_start-weak.d: Likewise.
	* testsuite/ld-elf/ehdr_start.d: Likewise.
	* testsuite/ld-elf/exclude3b.d: Likewise.
	* testsuite/ld-elf/export-class.exp: Likewise.
	* testsuite/ld-elf/global1.d: Likewise.
	* testsuite/ld-elf/hash.d: Likewise.
	* testsuite/ld-elf/header.d: Likewise.
	* testsuite/ld-elf/loadaddr1.d: Likewise.
	* testsuite/ld-elf/loadaddr2.d: Likewise.
	* testsuite/ld-elf/loadaddr3a.d: Likewise.
	* testsuite/ld-elf/loadaddr3b.d: Likewise.
	* testsuite/ld-elf/local1.d: Likewise.
	* testsuite/ld-elf/maxpage1.d: Likewise.
	* testsuite/ld-elf/maxpage2.d: Likewise.
	* testsuite/ld-elf/maxpage3a.d: Likewise.
	* testsuite/ld-elf/mbind1a.d: Likewise.
	* testsuite/ld-elf/mbind1b.d: Likewise.
	* testsuite/ld-elf/mbind1c.d: Likewise.
	* testsuite/ld-elf/multibss1.d: Likewise.
	* testsuite/ld-elf/noload-2.d: Likewise.
	* testsuite/ld-elf/now-1.d: Likewise.
	* testsuite/ld-elf/now-2.d: Likewise.
	* testsuite/ld-elf/now-3.d: Likewise.
	* testsuite/ld-elf/now-4.d: Likewise.
	* testsuite/ld-elf/pie.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr16322.d: Likewise.
	* testsuite/ld-elf/pr16498a.d: Likewise.
	* testsuite/ld-elf/pr16498b.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr19162.d: Likewise.
	* testsuite/ld-elf/pr19539.d: Likewise.
	* testsuite/ld-elf/pr19617a.d: Likewise.
	* testsuite/ld-elf/pr19617b.d: Likewise.
	* testsuite/ld-elf/pr19617c.d: Likewise.
	* testsuite/ld-elf/pr19698.d: Likewise.
	* testsuite/ld-elf/pr19789.d: Likewise.
	* testsuite/ld-elf/pr20513c.d: Likewise.
	* testsuite/ld-elf/pr20513d.d: Likewise.
	* testsuite/ld-elf/pr21384.d: Likewise.
	* testsuite/ld-elf/pr21389a.d: Likewise.
	* testsuite/ld-elf/pr21389b.d: Likewise.
	* testsuite/ld-elf/pr21389c.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562e.d: Likewise.
	* testsuite/ld-elf/pr21562f.d: Likewise.
	* testsuite/ld-elf/pr21562g.d: Likewise.
	* testsuite/ld-elf/pr21562h.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr21903a.d: Likewise.
	* testsuite/ld-elf/pr21903b.d: Likewise.
	* testsuite/ld-elf/pr21903d.d: Likewise.
	* testsuite/ld-elf/pr22269a.d: Likewise.
	* testsuite/ld-elf/pr22269b.d: Likewise.
	* testsuite/ld-elf/pr22393-1a.d: Likewise.
	* testsuite/ld-elf/pr22393-1b.d: Likewise.
	* testsuite/ld-elf/pr22393-1c.d: Likewise.
	* testsuite/ld-elf/pr22393-1d.d: Likewise.
	* testsuite/ld-elf/pr22393-1e.d: Likewise.
	* testsuite/ld-elf/pr22393-1f.d: Likewise.
	* testsuite/ld-elf/pr22423.d: Likewise.
	* testsuite/ld-elf/rpath-1.d: Likewise.
	* testsuite/ld-elf/rpath-2.d: Likewise.
	* testsuite/ld-elf/runpath-1.d: Likewise.
	* testsuite/ld-elf/runpath-2.d: Likewise.
	* testsuite/ld-elf/seg.d: Likewise.
	* testsuite/ld-elf/sizeofb.d: Likewise.
	* testsuite/ld-elf/startofb.d: Likewise.
	* testsuite/ld-elf/strtab.d: Likewise.
	* testsuite/ld-elf/textaddr1.d: Likewise.
	* testsuite/ld-elf/textaddr2.d: Likewise.
	* testsuite/ld-elf/textaddr3.d: Likewise.
	* testsuite/ld-elf/textaddr4.d: Likewise.
	* testsuite/ld-elf/textaddr5.d: Likewise.
	* testsuite/ld-elf/textaddr6.d: Likewise.
	* testsuite/ld-elf/textaddr7.d: Likewise.
	* testsuite/ld-elf/tls.exp: Likewise.
	* testsuite/ld-elf/tls_common.exp: Likewise.
	* testsuite/ld-elf/unknown2.d: Likewise.
	* testsuite/ld-gc/abi-note.d: Likewise.
	* testsuite/ld-gc/pr11218.d: Likewise.
	* testsuite/ld-gc/pr19167.d: Likewise.
	* testsuite/ld-gc/pr20022.d: Likewise.
	* testsuite/ld-gc/start.d: Likewise.
	* testsuite/ld-gc/stop.d: Likewise.
	* testsuite/ld-scripts/phdrs2.exp: Likewise.
	* testsuite/ld-scripts/rgn-at5.d: Likewise.
	* testsuite/ld-undefined/entry-3.d: Likewise.
	* testsuite/ld-undefined/entry-4.d: Likewise.
 2018-04-25 21:13:14 +00:00
Alan Modra
2ac93be706 Remove arm-aout and arm-coff support 
This also removes arm-netbsd (not arm-netbsdelf!), arm-openbsd, and
arm-riscix.  Those targets weren't on the obsolete list but they are
all aout, and it doesn't make all that much sense to remove arm-aout
without removing them too.

bfd/
	* Makefile.am: Remove arm-aout and arm-coff support.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* aout-arm.c: Delete.
	* armnetbsd.c: Delete.
	* riscix.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/arm/objdump.exp: Remove arm-aout and
	arm-coff support.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* Makefile.am: Remove arm-aout and arm-coff support.
	* config/tc-arm.c: Likewise.
	* config/tc-arm.h: Likewise.
	* configure.tgt: Likewise.
	* testsuite/gas/aarch64/codealign.d: Likewise.
	* testsuite/gas/aarch64/mapping.d: Likewise.
	* testsuite/gas/aarch64/mapping2.d: Likewise.
	* testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: Likewise.
	* testsuite/gas/arm/adds-thumb1-reloc-local.d: Likewise.
	* testsuite/gas/arm/addsw-bad.d: Likewise.
	* testsuite/gas/arm/align.d: Likewise.
	* testsuite/gas/arm/align64.d: Likewise.
	* testsuite/gas/arm/arch7.d: Likewise.
	* testsuite/gas/arm/arch7a-mp.d: Likewise.
	* testsuite/gas/arm/arch7em.d: Likewise.
	* testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise.
	* testsuite/gas/arm/arm-it-auto-2.d: Likewise.
	* testsuite/gas/arm/arm-it-auto-3.d: Likewise.
	* testsuite/gas/arm/arm-it-auto.d: Likewise.
	* testsuite/gas/arm/arm-it-bad-2.d: Likewise.
	* testsuite/gas/arm/arm-it.d: Likewise.
	* testsuite/gas/arm/armv7e-m+fpv5-d16.d: Likewise.
	* testsuite/gas/arm/armv7e-m+fpv5-sp-d16.d: Likewise.
	* testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: Likewise.
	* testsuite/gas/arm/armv8-2-fp16-scalar.d: Likewise.
	* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise.
	* testsuite/gas/arm/armv8-2-fp16-simd.d: Likewise.
	* testsuite/gas/arm/armv8-a+crypto.d: Likewise.
	* testsuite/gas/arm/armv8-a+fp.d: Likewise.
	* testsuite/gas/arm/armv8-a+ras.d: Likewise.
	* testsuite/gas/arm/armv8-a+rdma-warning.d: Likewise.
	* testsuite/gas/arm/armv8-a+rdma.d: Likewise.
	* testsuite/gas/arm/armv8-a+simd.d: Likewise.
	* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
	* testsuite/gas/arm/armv8-r+fp.d: Likewise.
	* testsuite/gas/arm/armv8-r+simd.d: Likewise.
	* testsuite/gas/arm/armv8-r-barrier-thumb.d: Likewise.
	* testsuite/gas/arm/armv8_1-a+simd.d: Likewise.
	* testsuite/gas/arm/armv8_2+rdma.d: Likewise.
	* testsuite/gas/arm/armv8_2-a.d: Likewise.
	* testsuite/gas/arm/armv8_3-a-fp.d: Likewise.
	* testsuite/gas/arm/armv8_3-a-simd.d: Likewise.
	* testsuite/gas/arm/armv8a-automatic-hlt.d: Likewise.
	* testsuite/gas/arm/armv8a-automatic-lda.d: Likewise.
	* testsuite/gas/arm/attr-syntax.d: Likewise.
	* testsuite/gas/arm/automatic-bw.d: Likewise.
	* testsuite/gas/arm/automatic-cbz.d: Likewise.
	* testsuite/gas/arm/automatic-clrex.d: Likewise.
	* testsuite/gas/arm/automatic-lda.d: Likewise.
	* testsuite/gas/arm/automatic-ldaex.d: Likewise.
	* testsuite/gas/arm/automatic-ldaexb.d: Likewise.
	* testsuite/gas/arm/automatic-ldrex.d: Likewise.
	* testsuite/gas/arm/automatic-ldrexd.d: Likewise.
	* testsuite/gas/arm/automatic-movw.d: Likewise.
	* testsuite/gas/arm/automatic-sdiv.d: Likewise.
	* testsuite/gas/arm/automatic-strexb.d: Likewise.
	* testsuite/gas/arm/barrier-bad-thumb.d: Likewise.
	* testsuite/gas/arm/barrier-bad.d: Likewise.
	* testsuite/gas/arm/barrier-thumb.d: Likewise.
	* testsuite/gas/arm/barrier.d: Likewise.
	* testsuite/gas/arm/bignum1.d: Likewise.
	* testsuite/gas/arm/blx-bad.d: Likewise.
	* testsuite/gas/arm/blx-bl-convert.d: Likewise.
	* testsuite/gas/arm/blx-local.s: Likewise.
	* testsuite/gas/arm/crc32-armv8-a-bad.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
	* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
	* testsuite/gas/arm/dis-data.d: Likewise.
	* testsuite/gas/arm/dis-data2.d: Likewise.
	* testsuite/gas/arm/dis-data3.d: Likewise.
	* testsuite/gas/arm/eabi_attr_1.d: Likewise.
	* testsuite/gas/arm/fp-save.d: Likewise.
	* testsuite/gas/arm/group-reloc-alu-encoding-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-alu-parsing-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-alu.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldc-encoding-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldc-parsing-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldc.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldr-encoding-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldr-parsing-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldr.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldrs-encoding-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldrs-parsing-bad.d: Likewise.
	* testsuite/gas/arm/group-reloc-ldrs.d: Likewise.
	* testsuite/gas/arm/insn-error-a.d: Likewise.
	* testsuite/gas/arm/insn-error-t.d: Likewise.
	* testsuite/gas/arm/inst-po-2.d: Likewise.
	* testsuite/gas/arm/inst-po-3.d: Likewise.
	* testsuite/gas/arm/inst-po-be.d: Likewise.
	* testsuite/gas/arm/inst-po.d: Likewise.
	* testsuite/gas/arm/ldconst.d: Likewise.
	* testsuite/gas/arm/ldgesb-bad.d: Likewise.
	* testsuite/gas/arm/ldgesh-bad.d: Likewise.
	* testsuite/gas/arm/ldst-offset0.d: Likewise.
	* testsuite/gas/arm/local_function.d: Likewise.
	* testsuite/gas/arm/local_label_coff.d: Likewise.
	* testsuite/gas/arm/local_label_elf.d: Likewise.
	* testsuite/gas/arm/mapping.d: Likewise.
	* testsuite/gas/arm/mapping2.d: Likewise.
	* testsuite/gas/arm/mapping3.d: Likewise.
	* testsuite/gas/arm/mapping4.d: Likewise.
	* testsuite/gas/arm/mapshort-elf.d: Likewise.
	* testsuite/gas/arm/mask_1-armv8-a.d: Likewise.
	* testsuite/gas/arm/mask_1-armv8-r.d: Likewise.
	* testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: Likewise.
	* testsuite/gas/arm/movs-thumb1-reloc-local.d: Likewise.
	* testsuite/gas/arm/movw-local.d: Likewise.
	* testsuite/gas/arm/mrs-msr-thumb-v6t2.d: Likewise.
	* testsuite/gas/arm/mrs-msr-thumb-v7-m.d: Likewise.
	* testsuite/gas/arm/mrs-msr-thumb-v7e-m.d: Likewise.
	* testsuite/gas/arm/msr-imm-bad.d: Likewise.
	* testsuite/gas/arm/msr-reg-bad.d: Likewise.
	* testsuite/gas/arm/msr-reg-thumb.d: Likewise.
	* testsuite/gas/arm/nomapping.d: Likewise.
	* testsuite/gas/arm/nops.d: Likewise.
	* testsuite/gas/arm/pic.d: Likewise.
	* testsuite/gas/arm/pinsn.d: Likewise.
	* testsuite/gas/arm/plt-1.d: Likewise.
	* testsuite/gas/arm/pr21458.d: Likewise.
	* testsuite/gas/arm/pr9722.d: Likewise.
	* testsuite/gas/arm/strex-t.d: Likewise.
	* testsuite/gas/arm/t2-branch-global.d: Likewise.
	* testsuite/gas/arm/target-reloc-1.d: Likewise.
	* testsuite/gas/arm/thumb-b-bad.d: Likewise.
	* testsuite/gas/arm/thumb-w-bad.d: Likewise.
	* testsuite/gas/arm/thumb-w-good.d: Likewise.
	* testsuite/gas/arm/thumb.d: Likewise.
	* testsuite/gas/arm/thumb2_it.d: Likewise.
	* testsuite/gas/arm/thumb2_it_auto.d: Likewise.
	* testsuite/gas/arm/thumb2_it_search.d: Likewise.
	* testsuite/gas/arm/thumb2_ldmstm.d: Likewise.
	* testsuite/gas/arm/thumb2_ldr_immediate_armv6.d: Likewise.
	* testsuite/gas/arm/thumb2_ldr_immediate_armv6t2.d: Likewise.
	* testsuite/gas/arm/thumb2_ldr_immediate_highregs_armv6t2.d: Likewise.
	* testsuite/gas/arm/thumb2_pool.d: Likewise.
	* testsuite/gas/arm/thumb2_vpool.d: Likewise.
	* testsuite/gas/arm/thumb2_vpool_be.d: Likewise.
	* testsuite/gas/arm/thumb32.d: Likewise.
	* testsuite/gas/arm/thumbver.d: Likewise.
	* testsuite/gas/arm/tls.d: Likewise.
	* testsuite/gas/arm/tls_vxworks.d: Likewise.
	* testsuite/gas/arm/undefined.d: Likewise.
	* testsuite/gas/arm/undefined_coff.d: Likewise.
	* testsuite/gas/arm/unwind.d: Likewise.
	* testsuite/gas/arm/v4bx.d: Likewise.
	* testsuite/gas/arm/vcmp-noprefix-imm.d: Likewise.
	* testsuite/gas/arm/vcvt-bad.d: Likewise.
	* testsuite/gas/arm/vfma1.d: Likewise.
	* testsuite/gas/arm/vldconst.d: Likewise.
	* testsuite/gas/arm/vldconst_be.d: Likewise.
	* testsuite/gas/arm/vldm-arm.d: Likewise.
	* testsuite/gas/arm/vldr.d: Likewise.
	* testsuite/gas/arm/weakdef-1.d: Likewise.
	* testsuite/gas/arm/weakdef-2.d: Likewise.
	* config/te-riscix.h: Delete.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove arm-aout and arm-coff support.
	* configure.tgt: Likewise.
	* testsuite/ld-arm/attr-merge-div-00.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-01-m3.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-01.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-02.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-10-m3.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-10.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-11.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-12.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-120.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-20.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-21.d: Likewise.
	* testsuite/ld-arm/attr-merge-div-22.d: Likewise.
	* testsuite/ld-arm/attr-merge-hardfp-use-1.d: Likewise.
	* testsuite/ld-arm/attr-merge-hardfp-use-2.d: Likewise.
	* testsuite/ld-arm/attr-merge-nosection-1.d: Likewise.
	* testsuite/ld-arm/attr-merge-unknown-2.d: Likewise.
	* testsuite/ld-arm/attr-merge-unknown-2r.d: Likewise.
	* testsuite/ld-arm/attr-merge-unknown-3.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-1.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-10.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-10r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-11.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-11r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-12.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-12r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-13.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-13r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-14.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-14r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-1r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-2.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-2r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-3.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-3r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-4.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-4r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-5.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-5r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-6.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-6r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-7.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-7r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-8.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-8r.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-9.d: Likewise.
	* testsuite/ld-arm/attr-merge-vfp-9r.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-00-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-00.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-02-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-02.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-04-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-04.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-20-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-20.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-22-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-22.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-24-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-40-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-40.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-42-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-44-nowarn.d: Likewise.
	* testsuite/ld-arm/attr-merge-wchar-44.d: Likewise.
	* testsuite/ld-arm/eabi-hard-float.d: Likewise.
	* testsuite/ld-arm/eabi-soft-float-ABI4.d: Likewise.
	* testsuite/ld-arm/eabi-soft-float-r.d: Likewise.
	* testsuite/ld-arm/eabi-soft-float.d: Likewise.
	* testsuite/ld-arm/gc-hidden-1.d: Likewise.
	* emulparams/armaoutb.sh: Delete.
	* emulparams/armaoutl.sh: Delete.
	* emulparams/armcoff.sh: Delete.
	* emulparams/armnbsd.sh: Delete.
	* emulparams/riscix.sh: Delete.
	* scripttempl/armaout.sc: Delete.
	* scripttempl/armcoff.sc: Delete.
	* scripttempl/riscix.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-25 09:38:17 +09:30
Alan Modra
c65c21e1ff various i386-aout and i386-coff target removal 
Also tidies some other aout leftovers in binutils-common.exp.

bfd/
	* Makefile.am: Remove support for assorted i386 aout and coff targets.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* doc/bfdint.texi: Likewise.
	* targets.c: Likewise.
	* freebsd.h: Delete.
	* i386dynix.c: Delete.
	* i386freebsd.c: Delete.
	* i386linux.c: Delete.
	* i386mach3.c: Delete.
	* i386netbsd.c: Delete.
	* i386os9k.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/lib/binutils-common.exp: Remove support for assorted
	aout targets.
gas/
	* Makefile.am: Remove support for assorted i386 aout and coff targets.
	* config/obj-elf.c: Likewise.
	* config/tc-i386.h: Likewise.
	* configure.ac: Likewise.
	* configure.tgt: Likewise.
	* config/te-dynix.h: Delete.
	* config/te-i386aix.h: Delete.
	* config/te-mach.h: Delete.
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
include/
	* aout/dynix3.h: Delete.
ld/
	* Makefile.am: Remove support for assorted i386 aout and coff targets.
	* configure.tgt: Likewise.
	* testsuite/ld-discard/discard.exp: Likewise.
	* testsuite/ld-elf/binutils.exp: Likewise.
	* testsuite/ld-elf/tls.exp: Likewise.
	* testsuite/ld-elf/tls_common.exp: Likewise.
	* testsuite/ld-elfvers/vers.exp: Likewise.
	* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
	* testsuite/ld-elfweak/elfweak.exp: Likewise.
	* testsuite/ld-gc/abi-note.d: Likewise.
	* testsuite/ld-gc/pr19167.d: Likewise.
	* testsuite/ld-gc/pr20022.d: Likewise.
	* testsuite/ld-gc/start.d: Likewise.
	* testsuite/ld-gc/stop.d: Likewise.
	* testsuite/ld-i386/i386.exp: Likewise.
	* testsuite/ld-ifunc/binutils.exp: Likewise.
	* testsuite/ld-ifunc/ifunc.exp: Likewise.
	* testsuite/ld-linkonce/linkonce.exp: Likewise.
	* testsuite/ld-plugin/lto.exp: Likewise.
	* testsuite/ld-scripts/empty-address-2a.d: Likewise.
	* testsuite/ld-scripts/empty-address-2b.d: Likewise.
	* testsuite/ld-scripts/phdrs2.exp: Likewise.
	* testsuite/ld-scripts/section-match-1.d: Likewise.
	* testsuite/ld-shared/shared.exp: Likewise.
	* testsuite/ld-size/size.exp: Likewise.
	* testsuite/ld-sparc/sparc.exp: Likewise.
	* emulparams/i386coff.sh: Delete.
	* emulparams/i386linux.sh: Delete.
	* emulparams/i386mach.sh: Delete.
	* emulparams/i386nbsd.sh: Delete.
	* emulparams/vsta.sh: Delete.
	* scripttempl/i386coff.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-18 09:34:19 +09:30
Alan Modra
c9098af41e Remove sparc-aout and sparc-coff support 
bfd/
	* Makefile.am: Remove sparc-aout and sparc-coff support.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* aout-sparcle.c: Delete.
	* aoutf1.h: Delete.
	* cf-sparclynx.c: Delete.
	* coff-sparc.c: Delete.
	* demo64.c: Delete.
	* sparclinux.c: Delete.
	* sparclynx.c: Delete.
	* sparcnetbsd.c: Delete.
	* sunos.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/lib/binutils-common.exp: Remove sparc-aout and
	sparc-coff support.
gas/
	* Makefile.am: Remove sparc-aout and sparc-coff support.
	* config/obj-coff.h: Likewise.
	* config/tc-sparc.c: Likewise.
	* config/tc-sparc.h: Likewise.
	* configure.tgt: Likewise.
	* config/te-sparcaout.h: Delete.
	* testsuite/gas/sun4/addend.d: Delete.
	* testsuite/gas/sun4/addend.exp: Delete.
	* testsuite/gas/sun4/addend.s: Delete.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove sparc-aout and sparc-coff support.
	* configure.tgt: Likewise.
	* testsuite/ld-elfvers/vers.exp: Likewise.
	* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
	* testsuite/ld-elfweak/elfweak.exp: Likewise.
	* testsuite/ld-shared/shared.exp: Likewise.
	* emulparams/coff_sparc.sh: Delete.
	* emulparams/sparcaout.sh: Delete.
	* emulparams/sparclinux.sh: Delete.
	* emulparams/sparcnbsd.sh: Delete.
	* emulparams/sun4.sh: Delete.
	* scripttempl/sparccoff.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:33:26 +09:30
Alan Modra
dc12032bca Remove m68k-aout and m68k-coff support 
include/
	* aout/host.h: Remove m68k-aout and m68k-coff support.
	* aout/hp300hpux.h: Delete.
	* coff/apollo.h: Delete.
	* coff/aux-coff.h: Delete.
	* coff/m68k.h: Delete.
bfd/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* aoutf1.h: Likewise.
	* aoutx.h: Likewise.
	* archive.c: Likewise.
	* bfd-in.h: Likewise.
	* bfd.c: Likewise.
	* coffcode.h: Likewise.
	* coffswap.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* configure.host: Likewise.
	* doc/bfd.texinfo: Likewise.
	* doc/bfdint.texi: Likewise.
	* freebsd.h: Likewise.
	* gen-aout.c: Likewise.
	* hpux-core.c: Likewise.
	* libaout.h: Likewise.
	* libbfd-in.h: Likewise.
	* pdp11.c: Likewise.
	* peicode.h: Likewise.
	* riscix.c: Likewise.
	* targets.c: Likewise.
	* aout0.c: Delete.
	* coff-apollo.c: Delete.
	* coff-aux.c: Delete.
	* coff-m68k.c: Delete.
	* coff-svm68k.c: Delete.
	* coff-u68k.c: Delete.
	* hosts/delta68.h: Delete.
	* hosts/hp300bsd.h: Delete.
	* hosts/m68kaux.h: Delete.
	* hosts/news.h: Delete.
	* hp300bsd.c: Delete.
	* hp300hpux.c: Delete.
	* liboasys.h: Delete.
	* m68k4knetbsd.c: Delete.
	* m68klinux.c: Delete.
	* m68knetbsd.c: Delete.
	* oasys.c: Delete.
	* versados.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff
	support.
	* testsuite/binutils-all/copy-3.d: Likewise.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* config/tc-m68k.c: Likewise.
	* config/tc-m68k.h: Likewise.
	* configure.ac: Likewise.
	* configure.tgt: Likewise.
	* testsuite/gas/all/weakref1u.d: Likewise.
	* testsuite/gas/m68k/all.exp: Likewise.
	* testsuite/gas/m68k/br-isaa.d: Likewise.
	* testsuite/gas/m68k/br-isab.d: Likewise.
	* testsuite/gas/m68k/br-isac.d: Likewise.
	* config/te-psos.h: Delete.
	* config/te-sun3.h: Delete.
	* testsuite/gas/m68k-coff/gas.exp: Delete.
	* testsuite/gas/m68k-coff/p2389.s: Delete.
	* testsuite/gas/m68k-coff/p2389a.s: Delete.
	* testsuite/gas/m68k-coff/p2430.s: Delete.
	* testsuite/gas/m68k-coff/p2430a.s: Delete.
	* testsuite/gas/m68k-coff/t1.s: Delete.
	* testsuite/gas/m68k/p3041.d: Delete.
	* testsuite/gas/m68k/p3041.s: Delete.
	* testsuite/gas/m68k/p3041data.d: Delete.
	* testsuite/gas/m68k/p3041data.s: Delete.
	* testsuite/gas/m68k/p3041pcrel.d: Delete.
	* testsuite/gas/m68k/p3041pcrel.s: Delete.
	* testsuite/gas/m68k/t2.d: Delete.
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* configure.tgt: Likewise.
	* emultempl/m68kelf.em: Likewise.
	* ld.texinfo: Likewise.
	* mri.c: Likewise.
	* emulparams/delta68.sh: Delete.
	* emulparams/hp300bsd.sh: Delete.
	* emulparams/hp3hpux.sh: Delete.
	* emulparams/m68k4knbsd.sh: Delete.
	* emulparams/m68kaout.sh: Delete.
	* emulparams/m68kaux.sh: Delete.
	* emulparams/m68kcoff.sh: Delete.
	* emulparams/m68klinux.sh: Delete.
	* emulparams/m68knbsd.sh: Delete.
	* emulparams/m68kpsos.sh: Delete.
	* emulparams/sun3.sh: Delete.
	* emultempl/m68kcoff.em: Delete.
	* scripttempl/delta68.sc: Delete.
	* scripttempl/m68kaux.sc: Delete.
	* scripttempl/m68kcoff.sc: Delete.
	* scripttempl/psos.sc: Delete.
	* testsuite/ld-versados/t1-1.ro: Delete.
	* testsuite/ld-versados/t1-2.ro: Delete.
	* testsuite/ld-versados/t1.ld: Delete.
	* testsuite/ld-versados/t1.ook: Delete.
	* testsuite/ld-versados/t2-1.ro: Delete.
	* testsuite/ld-versados/t2-2.ro: Delete.
	* testsuite/ld-versados/t2-3.ro: Delete.
	* testsuite/ld-versados/t2.ld: Delete.
	* testsuite/ld-versados/t2.ook: Delete.
	* testsuite/ld-versados/versados.exp: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:31:36 +09:30
Alan Modra
211dc24b87 Remove sh5 and sh64 support 
include/
	* dis-asm.h: Remove sh5 and sh64 support.
bfd/
	* Makefile.am: Remove sh5 and sh64 support.
	* archures.c: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* cpu-sh.c: Likewise.
	* elf32-sh-relocs.h: Likewise.
	* elf32-sh.c: Likewise.
	* targets.c: Likewise.
	* elf32-sh64-com.c: Delete.
	* elf32-sh64.c: Delete.
	* elf32-sh64.h: Delete.
	* elf64-sh64.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove sh5 and sh64 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* sh-dis.c: Likewise.
	* sh64-dis.c: Delete.
	* sh64-opc.c: Delete.
	* sh64-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
bintuils/
	* testsuite/binutils-all/objcopy.exp: Remove sh5 and sh64 support.
gas/
	* Makefile.am: Remove sh5 and sh64 support.
	* config/tc-sh.c: Likewise.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/as.texinfo: Likewise.
	* testsuite/gas/cfi/cfi.exp: Likewise.
	* testsuite/gas/sh/basic.exp: Likewise.
	* config/tc-sh64.c: Delete.
	* config/tc-sh64.h: Delete.
	* doc/c-sh64.texi: Delete.
	* testsuite/gas/sh/sh64/abi-32.d: Delete.
	* testsuite/gas/sh/sh64/abi-32.s: Delete.
	* testsuite/gas/sh/sh64/abi-64.d: Delete.
	* testsuite/gas/sh/sh64/abi-64.s: Delete.
	* testsuite/gas/sh/sh64/basic-1.d: Delete.
	* testsuite/gas/sh/sh64/basic-1.s: Delete.
	* testsuite/gas/sh/sh64/case-1.d: Delete.
	* testsuite/gas/sh/sh64/case-1.s: Delete.
	* testsuite/gas/sh/sh64/case-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/crange1-1.d: Delete.
	* testsuite/gas/sh/sh64/crange1-2.d: Delete.
	* testsuite/gas/sh/sh64/crange1.s: Delete.
	* testsuite/gas/sh/sh64/crange2-1.d: Delete.
	* testsuite/gas/sh/sh64/crange2-2.d: Delete.
	* testsuite/gas/sh/sh64/crange2-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/crange2.s: Delete.
	* testsuite/gas/sh/sh64/crange3-1.d: Delete.
	* testsuite/gas/sh/sh64/crange3.s: Delete.
	* testsuite/gas/sh/sh64/crange4-1.d: Delete.
	* testsuite/gas/sh/sh64/crange4.s: Delete.
	* testsuite/gas/sh/sh64/crange5-1.d: Delete.
	* testsuite/gas/sh/sh64/crange5.s: Delete.
	* testsuite/gas/sh/sh64/creg-1.d: Delete.
	* testsuite/gas/sh/sh64/creg-1.s: Delete.
	* testsuite/gas/sh/sh64/creg-2.d: Delete.
	* testsuite/gas/sh/sh64/creg-2.s: Delete.
	* testsuite/gas/sh/sh64/datal-1.s: Delete.
	* testsuite/gas/sh/sh64/datal-2.d: Delete.
	* testsuite/gas/sh/sh64/datal-2.s: Delete.
	* testsuite/gas/sh/sh64/datal-3.s: Delete.
	* testsuite/gas/sh/sh64/datal32-1.d: Delete.
	* testsuite/gas/sh/sh64/datal32-3.d: Delete.
	* testsuite/gas/sh/sh64/datal64-1.d: Delete.
	* testsuite/gas/sh/sh64/datal64-3.d: Delete.
	* testsuite/gas/sh/sh64/eh-1.d: Delete.
	* testsuite/gas/sh/sh64/eh-1.s: Delete.
	* testsuite/gas/sh/sh64/endian-1.d: Delete.
	* testsuite/gas/sh/sh64/endian-1.s: Delete.
	* testsuite/gas/sh/sh64/endian-2.d: Delete.
	* testsuite/gas/sh/sh64/endian-2.s: Delete.
	* testsuite/gas/sh/sh64/err-1.s: Delete.
	* testsuite/gas/sh/sh64/err-2.s: Delete.
	* testsuite/gas/sh/sh64/err-3.s: Delete.
	* testsuite/gas/sh/sh64/err-4.s: Delete.
	* testsuite/gas/sh/sh64/err-abi-32.s: Delete.
	* testsuite/gas/sh/sh64/err-abi-64.s: Delete.
	* testsuite/gas/sh/sh64/err-dsp.s: Delete.
	* testsuite/gas/sh/sh64/err-movi-noexp-1.s: Delete.
	* testsuite/gas/sh/sh64/err-noexp-cmd1.s: Delete.
	* testsuite/gas/sh/sh64/err-pt-1.s: Delete.
	* testsuite/gas/sh/sh64/err-pt32-cmd1.s: Delete.
	* testsuite/gas/sh/sh64/err-pt32-cmd2.s: Delete.
	* testsuite/gas/sh/sh64/err-pt32-cmd3.s: Delete.
	* testsuite/gas/sh/sh64/err-ptb-1.s: Delete.
	* testsuite/gas/sh/sh64/err-ptb-2.s: Delete.
	* testsuite/gas/sh/sh64/err.exp: Delete.
	* testsuite/gas/sh/sh64/immexpr1.s: Delete.
	* testsuite/gas/sh/sh64/immexpr2.s: Delete.
	* testsuite/gas/sh/sh64/immexpr32-1.d: Delete.
	* testsuite/gas/sh/sh64/immexpr32-2.d: Delete.
	* testsuite/gas/sh/sh64/immexpr64-1.d: Delete.
	* testsuite/gas/sh/sh64/immexpr64-2.d: Delete.
	* testsuite/gas/sh/sh64/lineno.d: Delete.
	* testsuite/gas/sh/sh64/lineno.s: Delete.
	* testsuite/gas/sh/sh64/localcom-1.d: Delete.
	* testsuite/gas/sh/sh64/localcom-1.s: Delete.
	* testsuite/gas/sh/sh64/mix-1.d: Delete.
	* testsuite/gas/sh/sh64/mix-1.s: Delete.
	* testsuite/gas/sh/sh64/mix-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/movi-1.s: Delete.
	* testsuite/gas/sh/sh64/movi-2.s: Delete.
	* testsuite/gas/sh/sh64/movi-3.d: Delete.
	* testsuite/gas/sh/sh64/movi-3.s: Delete.
	* testsuite/gas/sh/sh64/movi32-1.d: Delete.
	* testsuite/gas/sh/sh64/movi32-2.d: Delete.
	* testsuite/gas/sh/sh64/movi32-noexp-2.d: Delete.
	* testsuite/gas/sh/sh64/movi64-1.d: Delete.
	* testsuite/gas/sh/sh64/movi64-2.d: Delete.
	* testsuite/gas/sh/sh64/movi64-2.s: Delete.
	* testsuite/gas/sh/sh64/movi64-3.d: Delete.
	* testsuite/gas/sh/sh64/movi64-noexp-2.d: Delete.
	* testsuite/gas/sh/sh64/pt-1.d: Delete.
	* testsuite/gas/sh/sh64/pt-1.s: Delete.
	* testsuite/gas/sh/sh64/pt-2.s: Delete.
	* testsuite/gas/sh/sh64/pt-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/pt32-1.d: Delete.
	* testsuite/gas/sh/sh64/pt32-noexp-2.d: Delete.
	* testsuite/gas/sh/sh64/pt64-1.d: Delete.
	* testsuite/gas/sh/sh64/pt64-32-1.d: Delete.
	* testsuite/gas/sh/sh64/pt64-32-2.d: Delete.
	* testsuite/gas/sh/sh64/pt64-noexp-2.d: Delete.
	* testsuite/gas/sh/sh64/ptc-1.s: Delete.
	* testsuite/gas/sh/sh64/ptc32-1.d: Delete.
	* testsuite/gas/sh/sh64/ptc32-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/ptc64-1.d: Delete.
	* testsuite/gas/sh/sh64/ptc64-32-1.d: Delete.
	* testsuite/gas/sh/sh64/ptc64-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/ptext-1.s: Delete.
	* testsuite/gas/sh/sh64/ptext32-1.d: Delete.
	* testsuite/gas/sh/sh64/ptext32-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/ptext64-1.d: Delete.
	* testsuite/gas/sh/sh64/ptext64-32-1.d: Delete.
	* testsuite/gas/sh/sh64/ptext64-noexp-1.d: Delete.
	* testsuite/gas/sh/sh64/rel-1.s: Delete.
	* testsuite/gas/sh/sh64/rel-2.s: Delete.
	* testsuite/gas/sh/sh64/rel-3.s: Delete.
	* testsuite/gas/sh/sh64/rel-4.s: Delete.
	* testsuite/gas/sh/sh64/rel-5.s: Delete.
	* testsuite/gas/sh/sh64/rel32-1.d: Delete.
	* testsuite/gas/sh/sh64/rel32-2.d: Delete.
	* testsuite/gas/sh/sh64/rel32-3.d: Delete.
	* testsuite/gas/sh/sh64/rel32-4.d: Delete.
	* testsuite/gas/sh/sh64/rel32-5.d: Delete.
	* testsuite/gas/sh/sh64/rel64-1.d: Delete.
	* testsuite/gas/sh/sh64/rel64-2.d: Delete.
	* testsuite/gas/sh/sh64/rel64-3.d: Delete.
	* testsuite/gas/sh/sh64/rel64-4.d: Delete.
	* testsuite/gas/sh/sh64/rel64-5.d: Delete.
	* testsuite/gas/sh/sh64/relax-1.d: Delete.
	* testsuite/gas/sh/sh64/relax-1.s: Delete.
	* testsuite/gas/sh/sh64/relax-2.d: Delete.
	* testsuite/gas/sh/sh64/relax-2.s: Delete.
	* testsuite/gas/sh/sh64/relax-3.d: Delete.
	* testsuite/gas/sh/sh64/relax-3.s: Delete.
	* testsuite/gas/sh/sh64/sh64.exp: Delete.
	* testsuite/gas/sh/sh64/shift-1.s: Delete.
	* testsuite/gas/sh/sh64/shift-2.s: Delete.
	* testsuite/gas/sh/sh64/shift-3.s: Delete.
	* testsuite/gas/sh/sh64/shift32-1.d: Delete.
	* testsuite/gas/sh/sh64/shift32-3.d: Delete.
	* testsuite/gas/sh/sh64/shift32-noexp-3.d: Delete.
	* testsuite/gas/sh/sh64/shift64-1.d: Delete.
	* testsuite/gas/sh/sh64/shift64-2.d: Delete.
	* testsuite/gas/sh/sh64/shift64-3.d: Delete.
	* testsuite/gas/sh/sh64/shift64-noexp-3.d: Delete.
	* testsuite/gas/sh/sh64/syntax-1.d: Delete.
	* testsuite/gas/sh/sh64/syntax-1.s: Delete.
	* testsuite/gas/sh/sh64/syntax-2.d: Delete.
	* testsuite/gas/sh/sh64/syntax-2.s: Delete.
	* testsuite/gas/sh/sh64/ua-1.s: Delete.
	* testsuite/gas/sh/sh64/ua32-1.d: Delete.
	* testsuite/gas/sh/sh64/ua64-1.d: Delete.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove sh5 and sh64 support.
	* configure.tgt: Likewise.
	* ldlang.c: Likewise.
	* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
	* testsuite/ld-gc/gc.exp: Likewise.
	* testsuite/ld-gc/pr13683.d: Likewise.
	* testsuite/ld-scripts/crossref.exp: Likewise.
	* testsuite/ld-selective/selective.exp: Likewise.
	* testsuite/ld-sh/ld-r-1.d: Likewise.
	* testsuite/ld-sh/rd-sh.exp: Likewise.
	* testsuite/ld-sh/sh.exp: Likewise.
	* testsuite/ld-srec/srec.exp: Likewise.
	* testsuite/ld-undefined/undefined.exp: Likewise.
	* emulparams/shelf32.sh: Delete.
	* emulparams/shelf32_linux.sh: Delete.
	* emulparams/shelf32_nbsd.sh: Delete.
	* emulparams/shelf64.sh: Delete.
	* emulparams/shelf64_nbsd.sh: Delete.
	* emulparams/shlelf32.sh: Delete.
	* emulparams/shlelf32_linux.sh: Delete.
	* emulparams/shlelf32_nbsd.sh: Delete.
	* emulparams/shlelf64.sh: Delete.
	* emulparams/shlelf64_nbsd.sh: Delete.
	* emultempl/sh64elf.em: Delete.
	* testsuite/ld-sh/sh64/abi32.sd: Delete.
	* testsuite/ld-sh/sh64/abi32.xd: Delete.
	* testsuite/ld-sh/sh64/abi64.sd: Delete.
	* testsuite/ld-sh/sh64/abi64.xd: Delete.
	* testsuite/ld-sh/sh64/abixx-noexp.sd: Delete.
	* testsuite/ld-sh/sh64/cmpct1.sd: Delete.
	* testsuite/ld-sh/sh64/cmpct1.xd: Delete.
	* testsuite/ld-sh/sh64/crange-1.s: Delete.
	* testsuite/ld-sh/sh64/crange-2a.s: Delete.
	* testsuite/ld-sh/sh64/crange-2b.s: Delete.
	* testsuite/ld-sh/sh64/crange-2c.s: Delete.
	* testsuite/ld-sh/sh64/crange-2d.s: Delete.
	* testsuite/ld-sh/sh64/crange-2e.s: Delete.
	* testsuite/ld-sh/sh64/crange-2f.s: Delete.
	* testsuite/ld-sh/sh64/crange-2g.s: Delete.
	* testsuite/ld-sh/sh64/crange-2h.s: Delete.
	* testsuite/ld-sh/sh64/crange-2i.s: Delete.
	* testsuite/ld-sh/sh64/crange1.rd: Delete.
	* testsuite/ld-sh/sh64/crange2.rd: Delete.
	* testsuite/ld-sh/sh64/crange3-cmpct.rd: Delete.
	* testsuite/ld-sh/sh64/crange3-media.rd: Delete.
	* testsuite/ld-sh/sh64/crange3.dd: Delete.
	* testsuite/ld-sh/sh64/crange3.rd: Delete.
	* testsuite/ld-sh/sh64/crangerel1.rd: Delete.
	* testsuite/ld-sh/sh64/crangerel2.rd: Delete.
	* testsuite/ld-sh/sh64/dlsection-1.s: Delete.
	* testsuite/ld-sh/sh64/dlsection.sd: Delete.
	* testsuite/ld-sh/sh64/endian.dbd: Delete.
	* testsuite/ld-sh/sh64/endian.dld: Delete.
	* testsuite/ld-sh/sh64/endian.ld: Delete.
	* testsuite/ld-sh/sh64/endian.s: Delete.
	* testsuite/ld-sh/sh64/endian.sbd: Delete.
	* testsuite/ld-sh/sh64/endian.sld: Delete.
	* testsuite/ld-sh/sh64/gotplt.d: Delete.
	* testsuite/ld-sh/sh64/gotplt.map: Delete.
	* testsuite/ld-sh/sh64/gotplt.s: Delete.
	* testsuite/ld-sh/sh64/init-cmpct.d: Delete.
	* testsuite/ld-sh/sh64/init-media.d: Delete.
	* testsuite/ld-sh/sh64/init.s: Delete.
	* testsuite/ld-sh/sh64/init64.d: Delete.
	* testsuite/ld-sh/sh64/mix1-noexp.sd: Delete.
	* testsuite/ld-sh/sh64/mix1.sd: Delete.
	* testsuite/ld-sh/sh64/mix1.xd: Delete.
	* testsuite/ld-sh/sh64/mix2-noexp.sd: Delete.
	* testsuite/ld-sh/sh64/mix2.sd: Delete.
	* testsuite/ld-sh/sh64/mix2.xd: Delete.
	* testsuite/ld-sh/sh64/rd-sh64.exp: Delete.
	* testsuite/ld-sh/sh64/rel-1.s: Delete.
	* testsuite/ld-sh/sh64/rel-2.s: Delete.
	* testsuite/ld-sh/sh64/rel32.xd: Delete.
	* testsuite/ld-sh/sh64/rel64.xd: Delete.
	* testsuite/ld-sh/sh64/relax.exp: Delete.
	* testsuite/ld-sh/sh64/relax1.s: Delete.
	* testsuite/ld-sh/sh64/relax2.s: Delete.
	* testsuite/ld-sh/sh64/relax3.s: Delete.
	* testsuite/ld-sh/sh64/relax4.s: Delete.
	* testsuite/ld-sh/sh64/reldl-1.s: Delete.
	* testsuite/ld-sh/sh64/reldl-2.s: Delete.
	* testsuite/ld-sh/sh64/reldl32.rd: Delete.
	* testsuite/ld-sh/sh64/reldl64.rd: Delete.
	* testsuite/ld-sh/sh64/relfail.exp: Delete.
	* testsuite/ld-sh/sh64/relfail.s: Delete.
	* testsuite/ld-sh/sh64/sh64-1.s: Delete.
	* testsuite/ld-sh/sh64/sh64-2.s: Delete.
	* testsuite/ld-sh/sh64/sh64.exp: Delete.
	* testsuite/ld-sh/sh64/shcmp-1.s: Delete.
	* testsuite/ld-sh/sh64/shdl-1.s: Delete.
	* testsuite/ld-sh/sh64/shdl-2.s: Delete.
	* testsuite/ld-sh/sh64/shdl32.xd: Delete.
	* testsuite/ld-sh/sh64/shdl64.sd: Delete.
	* testsuite/ld-sh/sh64/shdl64.xd: Delete.
	* testsuite/ld-sh/sh64/shmix-1.s: Delete.
	* testsuite/ld-sh/sh64/shmix-2.s: Delete.
	* testsuite/ld-sh/sh64/shmix-3.s: Delete.
	* testsuite/ld-sh/sh64/stobin-0-dso.d: Delete.
	* testsuite/ld-sh/sh64/stobin-1.d: Delete.
	* testsuite/ld-sh/sh64/stobin.s: Delete.
	* testsuite/ld-sh/sh64/stolib.s: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:29:39 +09:30
Alan Modra
a9a4b30244 Remove w65 support 
include/
	* coff/internal.h: Remove w65 support.
	* coff/w65.h: Delete.
bfd/
	* Makefile.am: Remove w65 support.
	* archures.c: Likewise.
	* coffcode.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* coff-w65.c: Delete.
	* cpu-w65.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove w65 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* w65-dis.c: Delete.
	* w65-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/objcopy.exp: Remove w65 support.
ld/
	* Makefile.am: Remove w65 support.
	* configure.tgt: Likewise.
	* emulparams/w65.sh: Delete.
	* scripttempl/w65.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:26:05 +09:30
Alan Modra
04cb01fd5a Remove we32k support 
include/
	* coff/we32k.h: Delete.
bfd/
	* Makefile.am: Remove we32k support.
	* archures.c: Likewise.
	* coffcode.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* coff-we32k.c: Delete.
	* cpu-we32k.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* configure.ac: Remove we32k support.
	* configure: Regenerate.
bintuils/
	* testsuite/binutils-all/objdump.exp: Remove we32k support.
 2018-04-16 15:24:43 +09:30
Alan Modra
c2bf1eecf9 Remove m88k support 
include/
	* coff/internal.h: Remove m88k support.
	* coff/m88k.h: Delete.
	* opcode/m88k.h: Delete.
bfd/
	* Makefile.am: Remove m88k support.
	* aoutx.h: Likewise.
	* archures.c: Likewise.
	* coffcode.h: Likewise.
	* coffswap.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* cpu-ns32k.c: Likewise.
	* elf32-nds32.c: Likewise.
	* mach-o.c: Likewise.
	* netbsd-core.c: Likewise.
	* reloc.c: Likewise.
	* targets.c: Likewise.
	* coff-m88k.c: Delete.
	* cpu-m88k.c: Delete.
	* elf32-m88k.c: Delete.
	* hosts/m88kmach3.h: Delete.
	* m88kmach3.c: Delete.
	* m88kopenbsd.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove m88k support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* m88k-dis.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* MAINTAINERS (Mark Kettenis): Move to past maintainers.
	* testsuite/binutils-all/objdump.exp: Remove m88k support.
gas/
	* configure.ac: Remove m88k support.
	* config.in: Regenerate.
	* configure: Regenerate.
ld/
	* Makefile.am: Remove m88k support.
	* configure.host: Likewise.
	* configure.tgt: Likewise.
	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
	* emulparams/m88kbcs.sh: Delete.
	* scripttempl/m88kbcs.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:23:38 +09:30
Alan Modra
6793974daa Remove i370 support 
include/
	* elf/i370.h: Delete.
	* opcode/i370.h: Delete.
bfd/
	* Makefile.am: Remove i370 support.
	* archures.c: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* cpu-i370.c: Delete.
	* elf32-i370.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove i370 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* i370-dis.c: Delete.
	* i370-opc.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* readelf.c: Remove i370 support.
	* testsuite/binutils-all/objdump.exp: Likewise.
gas/
	* Makefile.am: Remove i370 support.
	* app.c: Likewise.
	* config/obj-elf.c: Likewise.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/as.texinfo: Likewise.
	* testsuite/gas/all/gas.exp: Likewise.
	* testsuite/gas/elf/warn-2.s: Likewise.
	* testsuite/gas/lns/lns.exp: Likewise.
	* config/tc-i370.c: Delete.
	* config/tc-i370.h: Delete.
	* doc/c-i370.texi: Delete.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove i370 support.
	* configure.tgt: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
	* emulparams/elf32i370.sh: Delete.
	* scripttempl/elfi370.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:21:56 +09:30
Alan Modra
e82aa7944d Remove h8500 support 
include/
	* coff/h8500.h: Delete.
	* coff/internal.h: Remove h8500 support.
bfd/
	* Makefile.am: Remove h8500 support.
	* archures.c: Likewise.
	* coffcode.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* coff-h8500.c: Delete.
	* cpu-h8500.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove h8500 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* h8500-dis.c: Delete.
	* h8500-opc.h: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/objcopy.exp: Remove h8500 support.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* config/obj-coff.h: Remove h8500 support.
ld/
	* Makefile.am: Remove h8500 support.
	* configure.tgt: Likewise.
	* emulparams/h8500.sh: Delete.
	* emulparams/h8500b.sh: Delete.
	* emulparams/h8500c.sh: Delete.
	* emulparams/h8500m.sh: Delete.
	* emulparams/h8500s.sh: Delete.
	* scripttempl/h8500.sc: Delete.
	* scripttempl/h8500b.sc: Delete.
	* scripttempl/h8500c.sc: Delete.
	* scripttempl/h8500m.sc: Delete.
	* scripttempl/h8500s.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:19:52 +09:30
Alan Modra
fe0bf0fd57 Remove h8300-coff support 
include/
	* coff/h8300.h: Delete.
bfd/
	* Makefile.am: Remove h8300-coff support.
	* coffcode.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* reloc16.c: Likewise.
	* targets.c: Likewise.
	* coff-h8300.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/objcopy.exp: Remove h8300-coff support.
gas/
	* config/obj-coff.h: Remove h8300-coff support.
	* config/tc-h8300.c: Likewise.
	* config/tc-h8300.h: Likewise.
	* testsuite/gas/h8300/h8300.exp: Likewise.
	* testsuite/gas/h8300/branch-coff.s: Delete.
	* testsuite/gas/h8300/branchh-coff.s: Delete.
	* testsuite/gas/h8300/branchs-coff.s: Delete.
	* testsuite/gas/h8300/ffxx1-coff.d: Delete.
	* testsuite/gas/h8300/ffxx1-coff.s: Delete.
	* testsuite/gas/h8300/h8300-coff.exp: Delete.
ld/
	* Makefile.am: Remove h8300-coff support.
	* configure.tgt: Likewise.
	* testsuite/ld-h8300/h8300.exp: Likewise.
	* emulparams/h8300.sh: Delete.
	* emulparams/h8300h.sh: Delete.
	* emulparams/h8300hn.sh: Delete.
	* emulparams/h8300s.sh: Delete.
	* emulparams/h8300sn.sh: Delete.
	* emulparams/h8300sx.sh: Delete.
	* emulparams/h8300sxn.sh: Delete.
	* scripttempl/h8300.sc: Delete.
	* scripttempl/h8300h.sc: Delete.
	* scripttempl/h8300hn.sc: Delete.
	* scripttempl/h8300s.sc: Delete.
	* scripttempl/h8300sn.sc: Delete.
	* scripttempl/h8300sx.sc: Delete.
	* scripttempl/h8300sxn.sc: Delete.
	* testsuite/ld-h8300/relax-3-coff.d: Delete.
	* testsuite/ld-h8300/relax-4-coff.d: Delete.
	* testsuite/ld-h8300/relax-5-coff.d: Delete.
	* testsuite/ld-h8300/relax-6-coff.d: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:17:57 +09:30
Alan Modra
5972ac7375 Remove sony newsos3 support 
include/
	* aout/host.h: Remove newsos3 support.
bfd/
	* Makefile.am: Remove newsos3 support.
	* aoutx.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* newsos3.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/copy-2.d: Remove newsos3 support.
	* testsuite/binutils-all/nm.exp: Likewise.
ld/
	* Makefile.am: Remove newsos3 support.
	* configure.tgt: Likewise.
	* emulparams/news.sh: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:13:07 +09:30
Alan Modra
b4b594e304 Remove netware support 
include/
	* nlm/ChangeLog-9315: Delete.
	* nlm/alpha-ext.h: Delete.
	* nlm/common.h: Delete.
	* nlm/external.h: Delete.
	* nlm/i386-ext.h: Delete.
	* nlm/internal.h: Delete.
	* nlm/ppc-ext.h: Delete.
	* nlm/sparc32-ext.h: Delete.
bfd/
	* Makefile.am: Remove netware support.
	* bfd-in.h: Likewise.
	* bfd.c: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* doc/bfdint.texi: Likewise.
	* ecoff.c: Likewise.
	* targets.c: Likewise.
	* libnlm.h: Delete.
	* nlm-target.h: Delete.
	* nlm.c: Delete.
	* nlm32-alpha.c: Delete.
	* nlm32-i386.c: Delete.
	* nlm32-ppc.c: Delete.
	* nlm32-sparc.c: Delete.
	* nlm32.c: Delete.
	* nlm64.c: Delete.
	* nlmcode.h: Delete.
	* nlmswap.h: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* .gitignore: Remove netware support.
	* Makefile.am: Likewise.
	* configure.ac: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/binutils.texi: Likewise.
	* testsuite/binutils-all/nm.exp: Likewise.
	* nlmconv.c: Delete.
	* nlmconv.h: Delete.
	* nlmheader.y: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
gas/
	* Makefile.am: Remove netware support.
	* config/tc-i386.c: Likewise.
	* configure.tgt: Likewise.
	* config/te-netware.h: Delete.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
gprof/
	* corefile.c: Remove netware support.
ld/
	* Makefile.am: Remove netware support.
	* configure.tgt: Likewise.
	* testsuite/ld-powerpc/powerpc.exp: Likewise.
	* emulparams/i386nw.sh: Delete.
	* emulparams/ppcnw.sh: Delete.
	* scripttempl/nw.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-16 15:11:22 +09:30
Alan Modra
fceadf0951 Remove tahoe support 
include/
	* opcode/tahoe.h: Delete.
bfd/
	* archures.c: Remove tahoe support.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* hosts/tahoe.h: Delete.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
opcodes/
	* configure.ac: Remove tahoe support.
	* configure: Regenerate.
binutils/
	* testsuite/binutils-all/objdump.exp: Remove tahoe support.
gprof/
	* Makefile.am: Remove tahoe support.
	* corefile.c: Likewise.
	* tahoe.c: Delete.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
 2018-04-16 15:08:40 +09:30
Alan Modra
a8eb42a8b7 Remove i860, i960, bout and aout-adobe targets 
Plus remove a few leftovers from the 29k support.

include/
	* aout/adobe.h: Delete.
	* aout/reloc.h: Delete.
	* coff/i860.h: Delete.
	* coff/i960.h: Delete.
	* elf/i860.h: Delete.
	* elf/i960.h: Delete.
	* opcode/i860.h: Delete.
	* opcode/i960.h: Delete.
	* aout/aout64.h (enum reloc_type): Trim off 29k and other unused values.
	* aout/ar.h (ARMAGB): Remove.
	* coff/internal.h (struct internal_aouthdr, struct internal_scnhdr,
	union internal_auxent): Remove i960 support.
bfd/
	* aout-adobe.c: Delete.
	* bout.c: Delete.
	* coff-i860.c: Delete.
	* coff-i960.c: Delete.
	* cpu-i860.c: Delete.
	* cpu-i960.c: Delete.
	* elf32-i860.c: Delete.
	* elf32-i960.c: Delete.
	* hosts/i860mach3.h: Delete.
	* Makefile.am: Remove i860, i960, bout, and adobe support.
	* archures.c: Remove i860 and i960 support.
	* coffcode.h: Likewise.
	* reloc.c: Likewise.
	* aoutx.h: Comment updates.
	* archive.c: Remove BOUT and i960 support.
	* bfd.c: Remove BOUT support.
	* coffswap.h: Remove i960 support.
	* config.bfd: Remove i860, i960 and adobe targets.
	* configure.ac: Remove adode, bout, i860, i960, icoff targets.
	* targets.c: Likewise.
	* ieee.c: Remove i960 support.
	* mach-o.c: Remove i860 support.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* opcodes/i860-dis.c: Delete.
	* opcodes/i960-dis.c: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* ieee.c: Remove i960 support.
	* od-macho.c: Remove i860 support.
	* readelf.c: Remove i860 and i960 support.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/binutils-all/objdump.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* config/aout_gnu.h: Delete.
	* config/tc-i860.c: Delete.
	* config/tc-i860.h: Delete.
	* config/tc-i960.c: Delete.
	* config/tc-i960.h: Delete.
	* doc/c-i860.texi: Delete.
	* doc/c-i960.texi: Delete.
	* testsuite/gas/i860/README.i860: Delete.
	* testsuite/gas/i860/bitwise.d: Delete.
	* testsuite/gas/i860/bitwise.s: Delete.
	* testsuite/gas/i860/branch.d: Delete.
	* testsuite/gas/i860/branch.s: Delete.
	* testsuite/gas/i860/bte.d: Delete.
	* testsuite/gas/i860/bte.s: Delete.
	* testsuite/gas/i860/dir-align01.d: Delete.
	* testsuite/gas/i860/dir-align01.s: Delete.
	* testsuite/gas/i860/dir-intel01.d: Delete.
	* testsuite/gas/i860/dir-intel01.s: Delete.
	* testsuite/gas/i860/dir-intel02.d: Delete.
	* testsuite/gas/i860/dir-intel02.s: Delete.
	* testsuite/gas/i860/dir-intel03-err.l: Delete.
	* testsuite/gas/i860/dir-intel03-err.s: Delete.
	* testsuite/gas/i860/dual01.d: Delete.
	* testsuite/gas/i860/dual01.s: Delete.
	* testsuite/gas/i860/dual02-err.l: Delete.
	* testsuite/gas/i860/dual02-err.s: Delete.
	* testsuite/gas/i860/dual03.d: Delete.
	* testsuite/gas/i860/dual03.s: Delete.
	* testsuite/gas/i860/fldst01.d: Delete.
	* testsuite/gas/i860/fldst01.s: Delete.
	* testsuite/gas/i860/fldst02.d: Delete.
	* testsuite/gas/i860/fldst02.s: Delete.
	* testsuite/gas/i860/fldst03.d: Delete.
	* testsuite/gas/i860/fldst03.s: Delete.
	* testsuite/gas/i860/fldst04.d: Delete.
	* testsuite/gas/i860/fldst04.s: Delete.
	* testsuite/gas/i860/fldst05.d: Delete.
	* testsuite/gas/i860/fldst05.s: Delete.
	* testsuite/gas/i860/fldst06.d: Delete.
	* testsuite/gas/i860/fldst06.s: Delete.
	* testsuite/gas/i860/fldst07.d: Delete.
	* testsuite/gas/i860/fldst07.s: Delete.
	* testsuite/gas/i860/fldst08.d: Delete.
	* testsuite/gas/i860/fldst08.s: Delete.
	* testsuite/gas/i860/float01.d: Delete.
	* testsuite/gas/i860/float01.s: Delete.
	* testsuite/gas/i860/float02.d: Delete.
	* testsuite/gas/i860/float02.s: Delete.
	* testsuite/gas/i860/float03.d: Delete.
	* testsuite/gas/i860/float03.s: Delete.
	* testsuite/gas/i860/float04.d: Delete.
	* testsuite/gas/i860/float04.s: Delete.
	* testsuite/gas/i860/form.d: Delete.
	* testsuite/gas/i860/form.s: Delete.
	* testsuite/gas/i860/i860.exp: Delete.
	* testsuite/gas/i860/iarith.d: Delete.
	* testsuite/gas/i860/iarith.s: Delete.
	* testsuite/gas/i860/ldst01.d: Delete.
	* testsuite/gas/i860/ldst01.s: Delete.
	* testsuite/gas/i860/ldst02.d: Delete.
	* testsuite/gas/i860/ldst02.s: Delete.
	* testsuite/gas/i860/ldst03.d: Delete.
	* testsuite/gas/i860/ldst03.s: Delete.
	* testsuite/gas/i860/ldst04.d: Delete.
	* testsuite/gas/i860/ldst04.s: Delete.
	* testsuite/gas/i860/ldst05.d: Delete.
	* testsuite/gas/i860/ldst05.s: Delete.
	* testsuite/gas/i860/ldst06.d: Delete.
	* testsuite/gas/i860/ldst06.s: Delete.
	* testsuite/gas/i860/pfam.d: Delete.
	* testsuite/gas/i860/pfam.s: Delete.
	* testsuite/gas/i860/pfmam.d: Delete.
	* testsuite/gas/i860/pfmam.s: Delete.
	* testsuite/gas/i860/pfmsm.d: Delete.
	* testsuite/gas/i860/pfmsm.s: Delete.
	* testsuite/gas/i860/pfsm.d: Delete.
	* testsuite/gas/i860/pfsm.s: Delete.
	* testsuite/gas/i860/pseudo-ops01.d: Delete.
	* testsuite/gas/i860/pseudo-ops01.s: Delete.
	* testsuite/gas/i860/regress01.d: Delete.
	* testsuite/gas/i860/regress01.s: Delete.
	* testsuite/gas/i860/shift.d: Delete.
	* testsuite/gas/i860/shift.s: Delete.
	* testsuite/gas/i860/simd.d: Delete.
	* testsuite/gas/i860/simd.s: Delete.
	* testsuite/gas/i860/system.d: Delete.
	* testsuite/gas/i860/system.s: Delete.
	* testsuite/gas/i860/xp.d: Delete.
	* testsuite/gas/i860/xp.s: Delete.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/all.texi: Likewise.
	* testsuite/gas/all/gas.exp
	* config/obj-coff.h: Remove i960 support.
	* doc/internals.texi: Likewise.
	* expr.c: Likewise.
	* read.c: Likewise.
	* write.c: Likewise.
	* write.h: Likewise.
	* testsuite/gas/lns/lns.exp: Likewise.
	* testsuite/gas/symver/symver.exp: Likewise.
	* config/tc-m68k.c: Remove BOUT support.
	* config/tc-score.c: Likewise.
	* config/tc-score7.c: Likewise.
	* config/tc-sparc.c: Likewise.
	* symbols.c: Likewise.
	* doc/h8.texi: Likewise.
	* configure.ac: Remove BOUT and i860 support.
	* doc/as.texinfo: Remove BOUT, i860 and i960 support
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* emulparams/coff_i860.sh: Delete.
	* emulparams/elf32_i860.sh: Delete.
	* emulparams/elf32_i960.sh: Delete.
	* emulparams/gld960.sh: Delete.
	* emulparams/gld960coff.sh: Delete.
	* emulparams/lnk960.sh: Delete.
	* emultempl/gld960.em: Delete.
	* emultempl/gld960c.em: Delete.
	* emultempl/lnk960.em: Delete.
	* scripttempl/i860coff.sc: Delete.
	* scripttempl/i960.sc: Delete.
	* ld.texinfo: Remove i960 support.
	* Makefile.am: Remove i860 and i960 support.
	* configure.tgt: Likewise.
	* testsuite/ld-discard/extern.d: Likewise.
	* testsuite/ld-discard/start.d: Likewise.
	* testsuite/ld-discard/static.d: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group1.d: Likewise.
	* testsuite/ld-elf/group3b.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/merge2.d: Likewise.
	* testsuite/ld-elf/merge3.d: Likewise.
	* testsuite/ld-elf/orphan-10.d: Likewise.
	* testsuite/ld-elf/orphan-11.d: Likewise.
	* testsuite/ld-elf/orphan-12.d: Likewise.
	* testsuite/ld-elf/orphan-9.d: Likewise.
	* testsuite/ld-elf/orphan-region.d: Likewise.
	* testsuite/ld-elf/orphan.d: Likewise.
	* testsuite/ld-elf/orphan3.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17550a.d: Likewise.
	* testsuite/ld-elf/pr17550b.d: Likewise.
	* testsuite/ld-elf/pr17550c.d: Likewise.
	* testsuite/ld-elf/pr17550d.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr20528a.d: Likewise.
	* testsuite/ld-elf/pr20528b.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/ld-elf/pr22836-1a.d: Likewise.
	* testsuite/ld-elf/pr22836-1b.d: Likewise.
	* testsuite/ld-elf/pr349.d: Likewise.
	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
	* testsuite/ld-elf/sec64k.exp: Likewise.
	* testsuite/ld-elf/warn1.d: Likewise.
	* testsuite/ld-elf/warn2.d: Likewise.
	* testsuite/ld-elf/warn3.d: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
 2018-04-11 21:49:30 +09:30
Maciej W. Rozycki
c43b2c546b binutils/testsuite: Also consider *-*-lynxos*' and *-*-symbianelf*' ELF 
These targets use the ELF format according to `bfd/config.bfd'.

	binutils/
	* testsuite/lib/binutils-common.exp (is_elf_format): Also return
	1 for `*-*-lynxos*' and `*-*-symbianelf*' targets.
 2018-04-11 12:03:49 +01:00
Alan Modra
d4ae193277 Fix some strip test fails on nds32 and pru 
Fixes these fails:
nds32le-linux  +FAIL: binutils-all/strip-14
nds32le-linux  +FAIL: binutils-all/strip-15
pru-elf  +FAIL: binutils-all/strip-14
pru-elf  +FAIL: binutils-all/strip-15

strip-13 fails on nds32 due to an assertion failure and out of bounds
access to nds32_elf_howto_table.

	* testsuite/binutils-all/objcopy.exp (strip-14, strip-15): Choose
	reloc=11 for pru and reloc=50 for nds32.
	* testsuite/binutils-all/strip-15.d: Accept 0xb reloc number.
 2018-04-10 09:41:25 +09:30
Maciej W. Rozycki
d52e3d06e5 binutils/testsuite: Fix a crash with STN_UNDEF in relocation 
Verify that `strip' completes successfully and a correct relocation
entry is copied for a relocation encountered with the STN_UNDEF symbol
index.

	binutils/
	* testsuite/binutils-all/strip-15.d: New test.
	* testsuite/binutils-all/strip-15rel.s: New test source.
	* testsuite/binutils-all/strip-15rela.s: New test source.
	* testsuite/binutils-all/strip-15mips64.s: New test source.
	* testsuite/binutils-all/objcopy.exp: Run the new test.
 2018-04-09 13:42:01 +01:00
Maciej W. Rozycki
3f97ba9fc8 binutils/testsuite: Verify the handling of invalid `r_sym' in relocation 
Verify that `strip' terminates gracefully and a correct error message is
produced for a relocation encountered with an invalid symbol index.  No
single relocation number is valid across all targets we support, so pick
a few numbers to choose from depending on the target.

	binutils/
	* testsuite/binutils-all/strip-14.d: New test.
	* testsuite/binutils-all/strip-14rel.s: New test source.
	* testsuite/binutils-all/strip-14rela.s: New test source.
	* testsuite/binutils-all/strip-14mips64.s: New test source.
	* testsuite/binutils-all/objcopy.exp: Run the new test.
 2018-04-09 13:42:00 +01:00
Maciej W. Rozycki
2d8c1a2318 MIPS/binutils/testsuite: Fix .dc.l' typo in strip-13mips64.s' 
Fix a typo: `.dc.w' -> `.dc.l' in `strip-13mips64.s', correcting a bug
from commit 2f8ceb3899 ("binutils/testsuite: Support REL and MIPS64
reloc formats with `strip-13'").  For relocation format correctness only
as there is no observable change in test results due to the lack of
connection between the second relocation entry affected and the examined
error message produced.

	binutils/
	* testsuite/binutils-all/strip-13mips64.s: Use `.dc.l' rather
	than `.dc.w' in second relocation.
 2018-04-05 22:37:17 +01:00
Maciej W. Rozycki
65bd20451f binutils/testsuite: Tighten the error message check with `strip-13' 
Avoid false positives and actually verify both that an `unsupported
relocation type 0x8f' message is produced and that no other message is,
except for the final `bad value', in the `strip-13' test.  This ensures
that it is a relocation processing error and not a different issue that
has caused `strip' to terminate unsuccessfully, and that the number
representing the unsupported relocation has not been clobbered.

	binutils/
	* testsuite/binutils-all/strip-13.d: Also expect `unsupported
	relocation type 0x8f' error message.
 2018-04-05 13:08:35 +01:00
Maciej W. Rozycki
2f8ceb3899 binutils/testsuite: Support REL and MIPS64 reloc formats with `strip-13' 
Add source variants for the `strip-13' test that produce relocations in
the REL and MIPS64 formats, fixing a failure for the `mips64el-openbsd'
target.  This also corrects output for `i*86-*', `i960-*', `m6812-*' and
`m68hc12-*', o32 `mips*-*', and `score*-*' targets, which however does
not show up as a test result change due to lax error message matching
causing `bad value' previously produced by `strip' as a result of input
file rejection to be accepted as a test pass.

For `m6811-*' aka `m68hc11-*' targets this causes a phantom regression,
because they use 16-bit addressing and therefore `.dc.a' emits 16-bit
quantities causing relocation data constructed in assembly not to be as
expected.  Previously input was rejected by `strip' with a `bad value'
message and now it is accepted, however due to the relocation data error
the relocation number is not one of the unsupported ones and the tool
completes successfully, which scores as a test failure.

Disable the test case for `m6811-*' and `m68hc11-*' targets then, as it
is a test case bug rather than a problem with the relevant backend.  A
separate change to the test case is required to correct this problem, at
which point the test case can be enabled for the affected targets.

	binutils/
	* testsuite/binutils-all/strip-13.s: Rename to...
	* testsuite/binutils-all/strip-13rela.s: ... this.
	* testsuite/binutils-all/strip-13rel.s: New test source.
	* testsuite/binutils-all/strip-13mips64.s: New test source.
	* testsuite/binutils-all/strip-13.d: Remove `arm-*', `d10v-*',
	`dlx-*' and `xgate-*' from `not-target' list.  Add `m6811-*' and
	`m68hc11-*' to `not-target' list.
	* testsuite/binutils-all/objcopy.exp: Switch between sources for
	`strip-13'.
 2018-04-05 13:08:35 +01:00
Maciej W. Rozycki
aad7be454b binutils/testsuite: Enable strip-13' test for hppa*-*' 
Based on relocations defined in include/elf/*.h files we have relocation
numbers: 143, 159, 214 and 215 currently not used by any of our ELF
targets.  Use 143 then instead of 241 to enable the `strip-13' test for
`hppa*-*' targets.  It has a side effect with some targets of verifying
that unused relocations whose numbers are below the respective R_*_max
value are handled correctly.

	binutils/
	* testsuite/binutils-all/strip-13.s: Use 143 (0x8f) rather than
	241 (0xf1) for the relocation number and RELA addend.
	* testsuite/binutils-all/strip-13.d: Remove `hppa*-*' from the
	`not-target' list.
 2018-04-05 13:08:35 +01:00
Nick Clifton
8fd7578189 Improve readelf's selection of a file start symbol when displaying a gnu build attribute. 
* readelf.c (get_symbol_for_build_attribute): Skip ARM mapping
	symbols.
	(print_gnu_build_attribute_description): If no file start symbol
	could be found, look for one two bytes into the file.
	* testsuite/binutils-all/note-4-64.s: Set the address of the file
	start symbol to two bytes into the file.
	* testsuite/binutils-all/note-4-32.s: Likewise.
 2018-03-23 12:20:03 +00:00
Nick Clifton
f3185997ac Have info_to_howto functions return a success/fail status. Check this result. Stop strip from completeing if one of these functions fails. 
bfd	PR 22875
	* elf-bfd.h (struct elf_backend_data): Change the return type of
	the elf_info_to_howto and elf_info_to_howto_rel function pointers
	to bfd_boolean.
	* elfcode.h (elf_slurp_reloc_table_from_section): Check the return value from the info_to_howto function and fail if that function failed.
	* elf32-h8300.c (elf32_h8_relocate_section): Check return value from the info_to_howto function.
	(elf32_h8_relax_section): Likewise.
	* elf32-lm32.c (lm32_elf_relocate_section): Likewise.
	* elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise.
	* elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise.
	* elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise.
	* elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise.
	* elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise.
	* elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Likewise.
	* elf64-x86-64.c (elf_x86_64_tls_transition): Likewise.
	* elfnn-ia64.c (elfNN_ia64_relocate_section): Likewise.
	* elfnn-riscv.c (riscv_elf_check_relocs): Likewise.
	(riscv_elf_relocate_section): Likewise.
	* elf-hppa.h (elf_hppa_info_to_howto): Change return type to
	bfd_boolean.  Issue an error message, set an error value and
	return FALSE if the reloc is not recognized.
	(elf_hppa_info_to_howto_rel): Likewise.
	* elf-m10200.c (mn10200_info_to_howto): Likewise.
	* elf-m10300.c (mn10300_info_to_howto): Likewise.
	* elf.c (_bfd_elf_no_info_to_howto): Likewise.
	* elf32-arc.c (arc_info_to_howto_rel): Likewise.
	* elf32-arm.c (elf32_arm_info_to_howto): Likewise.
	* elf32-avr.c (avr_info_to_howto_rela): Likewise.
	* elf32-bfin.c (bfin_info_to_howto): Likewise.
	* elf32-cr16.c (elf_cr16_info_to_howto): Likewise.
	* elf32-cr16c.c (elf_cr16c_info_to_howto): Likewise.
	* elf32-cris.c (elf_cr16c_info_to_howto_rel, cris_info_to_howto_rela): Likewise.
	* elf32-crx.c (elf_crx_info_to_howto): Likewise.
	* elf32-d10v.c (d10v_info_to_howto_rel): Likewise.
	* elf32-d30v.c (d30v_info_to_howto_rel, d30v_info_to_howto_rela): Likewise.
	* elf32-dlx.c (dlx_rtype_to_howto, elf32_dlx_info_to_howto, elf32_dlx_info_to_howto_rel): Likewise.
	* elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise.
	* elf32-fr30.c (fr30_info_to_howto_rela): Likewise.
	* elf32-frv.c (frv_info_to_howto_rela, 	frvfdpic_info_to_howto_rel): Likewise.
	* elf32-ft32.c (ft32_info_to_howto_rela): Likewise.
	* elf32-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise.
	* elf32-h8300.c (elf32_h8_info_to_howto, elf32_h8_info_to_howto_rel): Likewise.
	* elf32-i370.c (i370_elf_info_to_howto): Likewise.
	* elf32-i386.c (elf_i386_reloc_type_lookup, elf_i386_rtype_to_howto, elf_i386_info_to_howto_rel): Likewise.
	* elf32-i860.c (lookup_howto, elf32_i860_info_to_howto_rela): Likewise.
	* elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise.
	* elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise.
	* elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise.
	* elf32-lm32.c (lm32_info_to_howto_rela): Likewise.
	* elf32-m32c.c (m32c_info_to_howto_rela): Likewise.
	* elf32-m32r.c (m32r_info_to_howto_rel, m32r_info_to_howto): Likewise.
	* elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise.
	* elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise.
	* elf32-m68k.c (rtype_to_howto): Likewise.
	* elf32-mcore.c (mcore_elf_info_to_howto): Likewise.
	* elf32-mep.c (mep_info_to_howto_rela): Likewise.
	* elf32-metag.c (metag_info_to_howto_rela): Likewise.
	* elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise.
	* elf32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise.
	* elf32-moxie.c (moxie_info_to_howto_rela): Likewise.
	* elf32-msp430.c (msp430_info_to_howto_rela): Likewise.
	* elf32-mt.c (mt_info_to_howto_rela): Likewise.
	* elf32-nds32.c (nds32_info_to_howto_rel, nds32_info_to_howto): Likewise.
	* elf32-nios2.c (nios2_elf32_info_to_howto): Likewise.
	* elf32-or1k.c (or1k_info_to_howto_rela): Likewise.
	* elf32-pj.c (pj_elf_info_to_howto): Likewise.
	* elf32-ppc.c (ppc_elf_info_to_howto): Likewise.
	* elf32-pru.c (pru_elf32_info_to_howto): Likewise.
	* elf32-rl78.c (rl78_info_to_howto_rela): Likewise.
	* elf32-rx.c (rx_info_to_howto_rela): Likewise.
	* elf32-s390.c (elf_s390_info_to_howto): Likewise.
	* elf32-score.c (s3_bfd_score_info_to_howto, _bfd_score_info_to_howto): Likewise.
	* elf32-score7.c (s7_bfd_score_info_to_howto): Likewise.
	* elf32-sh.c (sh_elf_info_to_howto): Likewise.
	* elf32-spu.c (spu_elf_info_to_howto): Likewise.
	* elf32-tic6x.c (elf32_tic6x_info_to_howto, elf32_tic6x_info_to_howto_rel): Likewise.
	* elf32-tilepro.c (tilepro_info_to_howto_rela): Likewise.
	* elf32-v850.c (v850_elf_info_to_howto_rel, v850_elf_info_to_howto_rela, v800_elf_info_to_howto): Likewise.
	* elf32-vax.c (rtype_to_howto): Likewise.
	* elf32-visium.c (visium_info_to_howto_rela): Likewise.
	* elf32-wasm32.c (elf32_wasm32_rtype_to_howto, elf32_wasm32_info_to_howto_rela): Likewise.
	* elf32-xc16x.c (elf32_xc16x_info_to_howto): Likewise.
	* elf32-xgate.c (xgate_info_to_howto_rel): Likewise.
	* elf32-xstormy16.c (xstormy16_info_to_howto_rela): Likewise.
	* elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise.
	* elf64-alpha.c (elf64_alpha_info_to_howto): Likewise.
	* elf64-gen.c (elf_generic_info_to_howto, elf_generic_info_to_howto_rel): Likewise.
	* elf64-ia64-vms.c (elf64_ia64_info_to_howto): Likewise.
	* elf64-mips.c (mips_elf64_info_to_howto_rela): Likewise.
	* elf64-mmix.c (mmix_info_to_howto_rela): Likewise.
	* elf64-ppc.c (ppc64_elf_info_to_howto): Likewise.
	* elf64-s390.c (elf_s390_reloc_type_lookup): Likewise.
	* elf64-sh64.c (elf_s390_info_to_howto, sh_elf64_info_to_howto): Likewise.
	* elf64-x86-64.c (elf_x86_64_info_to_howto): Likewise.
	* elfn32-mips.c (mips_info_to_howto_rel, mips_info_to_howto_rela): Likewise.
	* elfnn-aarch64.c (elfNN_aarch64_info_to_howto): Likewise.
	* elfnn-ia64.c (elfNN_ia64_info_to_howto): Likewise.
	* elfnn-riscv.c (riscv_info_to_howto_rela): Likewise.
	* elfxx-ia64.c (ia64_elf_reloc_type_lookup): Likewise.
	* elfxx-sparc.c (_bfd_sparc_elf_info_to_howto): Likewise.
	* elfxx-tilegx.c (tilegx_info_to_howto_rela): Likewise.
	* elf32-score.h (s7_bfd_score_info_to_howto): Update prototype.
	* elfxx-sparc.h (_bfd_sparc_elf_info_to_howto): Update prototype.
	* elfxx-tilegx.h (tilegx_info_to_howto_rela): Update prototype.
	* elfxx-target.h (elf_info_to_howto, elf_info_to_howto_rel): Default to NULL.

binutils PR 22875
	* objcopy.c (copy_object): Check the error status after marking symbols used in relocations.
	* testsuite/binutils-all/strip-13.s: New test source file.
	* testsuite/binutils-all/strip-13.s: New test driver file.
	* testsuite/binutils-all/objcopy.exp: Run the new test.
 2018-02-27 10:15:13 +00:00
Alan Modra
6e05870c97 BFD messages 
bfd/
	* archive.c, * bfd.c, * linker.c, * reloc.c, * stabs.c,
	* syms.c: Standardize error/warning messages.
binutils/
	* testsuite/binutils-all/mips/mips-reginfo-n32.d,
	* testsuite/binutils-all/mips/mips-reginfo.d: Update.
gas/
	* testsuite/gas/mips/reginfo-2.l: Update.
ld/
	* testsuite/ld-arm/cmse-implib-errors.out,
	* testsuite/ld-arm/cmse-new-earlier-later-implib.out,
	* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out,
	* testsuite/ld-arm/cmse-new-wrong-implib.out,
	* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out,
	* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out,
	* testsuite/ld-cris/badgotr1.d,
	* testsuite/ld-cris/tls-err-24.d,
	* testsuite/ld-cris/tls-err-25.d,
	* testsuite/ld-cris/tls-err-26.d,
	* testsuite/ld-cris/tls-err-27.d,
	* testsuite/ld-cris/tls-err-28.d,
	* testsuite/ld-cris/tls-err-40.d,
	* testsuite/ld-cris/tls-err-44.d,
	* testsuite/ld-cris/tls-err-48.d,
	* testsuite/ld-cris/tls-err-52.d,
	* testsuite/ld-cris/tls-err-53.d,
	* testsuite/ld-cris/tls-err-55.d,
	* testsuite/ld-cris/tls-err-56.d,
	* testsuite/ld-cris/tls-err-62.d,
	* testsuite/ld-cris/tls-err-65.d,
	* testsuite/ld-cris/tls-err-77.d,
	* testsuite/ld-elf/empty-implib.out,
	* testsuite/ld-elf/indirect.exp: Update.
 2018-02-26 09:33:15 +10:30
Alan Modra
2c1c967956 MIPS messages 
More standardization of messages.

bfd/
	* elfxx-mips.c: Standardize error/warning messages.
binutils/
	* testsuite/binutils-all/mips/mips-reginfo-n32.d,
	* testsuite/binutils-all/mips/mips-reginfo.d: Update.
gas/
	* testsuite/gas/mips/reginfo-2.l: Update.
ld/
	* testsuite/ld-mips-elf/attr-gnu-4-12.d,
	* testsuite/ld-mips-elf/attr-gnu-4-13.d,
	* testsuite/ld-mips-elf/attr-gnu-4-14.d,
	* testsuite/ld-mips-elf/attr-gnu-4-16.d,
	* testsuite/ld-mips-elf/attr-gnu-4-17.d,
	* testsuite/ld-mips-elf/attr-gnu-4-18.d,
	* testsuite/ld-mips-elf/attr-gnu-4-19.d,
	* testsuite/ld-mips-elf/attr-gnu-4-21.d,
	* testsuite/ld-mips-elf/attr-gnu-4-23.d,
	* testsuite/ld-mips-elf/attr-gnu-4-24.d,
	* testsuite/ld-mips-elf/attr-gnu-4-25.d,
	* testsuite/ld-mips-elf/attr-gnu-4-26.d,
	* testsuite/ld-mips-elf/attr-gnu-4-27.d,
	* testsuite/ld-mips-elf/attr-gnu-4-28.d,
	* testsuite/ld-mips-elf/attr-gnu-4-29.d,
	* testsuite/ld-mips-elf/attr-gnu-4-31.d,
	* testsuite/ld-mips-elf/attr-gnu-4-32.d,
	* testsuite/ld-mips-elf/attr-gnu-4-34.d,
	* testsuite/ld-mips-elf/attr-gnu-4-35.d,
	* testsuite/ld-mips-elf/attr-gnu-4-36.d,
	* testsuite/ld-mips-elf/attr-gnu-4-37.d,
	* testsuite/ld-mips-elf/attr-gnu-4-38.d,
	* testsuite/ld-mips-elf/attr-gnu-4-39.d,
	* testsuite/ld-mips-elf/attr-gnu-4-41.d,
	* testsuite/ld-mips-elf/attr-gnu-4-42.d,
	* testsuite/ld-mips-elf/attr-gnu-4-43.d,
	* testsuite/ld-mips-elf/attr-gnu-4-45.d,
	* testsuite/ld-mips-elf/attr-gnu-4-46.d,
	* testsuite/ld-mips-elf/attr-gnu-4-47.d,
	* testsuite/ld-mips-elf/attr-gnu-4-48.d,
	* testsuite/ld-mips-elf/attr-gnu-4-49.d,
	* testsuite/ld-mips-elf/attr-gnu-4-52.d,
	* testsuite/ld-mips-elf/attr-gnu-4-53.d,
	* testsuite/ld-mips-elf/attr-gnu-4-54.d,
	* testsuite/ld-mips-elf/attr-gnu-4-58.d,
	* testsuite/ld-mips-elf/attr-gnu-4-59.d,
	* testsuite/ld-mips-elf/attr-gnu-4-61.d,
	* testsuite/ld-mips-elf/attr-gnu-4-62.d,
	* testsuite/ld-mips-elf/attr-gnu-4-63.d,
	* testsuite/ld-mips-elf/attr-gnu-4-64.d,
	* testsuite/ld-mips-elf/attr-gnu-4-68.d,
	* testsuite/ld-mips-elf/attr-gnu-4-69.d,
	* testsuite/ld-mips-elf/attr-gnu-4-71.d,
	* testsuite/ld-mips-elf/attr-gnu-4-72.d,
	* testsuite/ld-mips-elf/attr-gnu-4-73.d,
	* testsuite/ld-mips-elf/attr-gnu-4-74.d,
	* testsuite/ld-mips-elf/attr-gnu-4-78.d,
	* testsuite/ld-mips-elf/attr-gnu-4-79.d,
	* testsuite/ld-mips-elf/attr-gnu-4-81.d,
	* testsuite/ld-mips-elf/attr-gnu-4-89.d,
	* testsuite/ld-mips-elf/attr-gnu-8-12.d,
	* testsuite/ld-mips-elf/attr-gnu-8-21.d,
	* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n32.d,
	* testsuite/ld-mips-elf/bal-jalx-pic-micromips-n64.d,
	* testsuite/ld-mips-elf/bal-jalx-pic-micromips.d,
	* testsuite/ld-mips-elf/bal-jalx-pic-n32.d,
	* testsuite/ld-mips-elf/bal-jalx-pic-n64.d,
	* testsuite/ld-mips-elf/bal-jalx-pic.d,
	* testsuite/ld-mips-elf/mode-change-error-1.d,
	* testsuite/ld-mips-elf/unaligned-branch-2.d,
	* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d,
	* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d,
	* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d,
	* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d,
	* testsuite/ld-mips-elf/unaligned-branch-micromips.d,
	* testsuite/ld-mips-elf/unaligned-branch-mips16.d,
	* testsuite/ld-mips-elf/unaligned-branch-r6-1.d,
	* testsuite/ld-mips-elf/unaligned-branch-r6-2.d,
	* testsuite/ld-mips-elf/unaligned-branch.d,
	* testsuite/ld-mips-elf/unaligned-jalx-1.d,
	* testsuite/ld-mips-elf/unaligned-jalx-3.d,
	* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d,
	* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d,
	* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d,
	* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d,
	* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d,
	* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d,
	* testsuite/ld-mips-elf/unaligned-jump-micromips.d,
	* testsuite/ld-mips-elf/unaligned-jump-mips16.d,
	* testsuite/ld-mips-elf/unaligned-jump.d: Update.
 2018-02-26 09:31:04 +10:30
Alan Modra
6e5e9d58c1 PR22836, "-r -s" doesn't work with -g3 using GCC 7 
This fixes the case where all of a group is removed with ld -r, the
situation in the PR, and failures where part of a group is removed
that contain relocs.

bfd/
	PR 22836
	* elf.c (_bfd_elf_fixup_group_sections): Account for removed
	relocation sections.  If size reduces to just the flag word,
	remove that too and mark with SEC_EXCLUDE.
	* elflink.c (bfd_elf_final_link): Strip empty group sections.
binutils/
	* testsuite/binutils-all/group-7.s,
	* testsuite/binutils-all/group-7a.d,
	* testsuite/binutils-all/group-7b.d,
	* testsuite/binutils-all/group-7c.d: New tests.
	* testsuite/binutils-all/objcopy.exp: Run them.
ld/
	* testsuite/ld-elf/pr22836-2.d,
	* testsuite/ld-elf/pr22836-2.s: New test.
 2018-02-13 22:55:49 +10:30
Maciej W. Rozycki
2d6dda7161 MIPS/BFD: Correctly report unsupported `.reginfo' section size 
Report an error when an unsupported `.reginfo' section size is found in
`_bfd_mips_elf_section_processing', removing an assertion that triggers
at elfxx-mips.c:7105 in GAS when assembling input like:

	.section	.reginfo
	.word		0xdeadbeef

and in `objcopy --rename-section' when renaming an incorrectly sized
section to `.reginfo'.

	bfd/
	* elfxx-mips.c (_bfd_mips_elf_section_processing): For
	SHT_MIPS_REGINFO sections don't assert the correct size and
	report an error instead.

	binutils/
	* testsuite/binutils-all/mips/mips-reginfo.d: New test.
	* testsuite/binutils-all/mips/mips-reginfo-n32.d: New test.
	* testsuite/binutils-all/mips/mips-reginfo.s: New test source.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.

	gas/
	* testsuite/gas/mips/reginfo-2.d: New test.
	* testsuite/gas/mips/reginfo-2-n32.d: New test.
	* testsuite/gas/mips/reginfo-2.l: New test stderr output.
	* testsuite/gas/mips/reginfo-2.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.
 2018-02-05 14:00:21 +00:00
Maciej W. Rozycki
78c8836415 binutils/testsuite: Support stderr options with `run_dump_test' 
Add support for the `error', `error_output', `warning' and
`warning_output' options for `run_dump_test' input files, based on the
version of the procedure in ld/testsuite/lib/ld-lib.exp and providing
compatible semantics.  These options apply to PROG under test and let
test cases specify output expected on stderr as well as express a
requirement for PROG to exit unsuccessfully.  Messages to match against
can be supplied either inline or fetched from a named file.  Update
procedure description in the introductory comment accordingly.

As the exit status from `remote_exec' is regrettably lost in our default
implementation of `binutils_run', which is user-overridable, avoid
changing this procedure's API and use a global `binutils_run_status'
variable to pass the status up to the caller, similarly to how
`binutils_run_failed' is handled.  Document the new variable in the
respective introductory comments.

	binutils/
	* testsuite/config/default.exp (binutils_run): Document
	`binutils_run_status'.
	* testsuite/lib/utils-lib.exp (default_binutils_run): Likewise,
	and set it.
	(run_dump_test): Add `error', `error_output', `warning' and
	`warning_output' options.  Update documentation accordingly.
 2018-02-05 14:00:21 +00:00
Nick Clifton
6f156d7a4a Add support for v3 binary annotation notes. 
I am checking in the attached patch which updates the binutils
  support for version 3 binary annotation notes.  (Version 3 adds
  an end address to the ranges covered by the notes, so that it
  is possible to detect gaps in the coverage).

  This patch also stops the note merging feature of objcopy from
  executing if the notes have relocations against them.  This makes the
  code simpler, and prevents the problems with architectures which have
  unusual relocation management issues.

	* objcopy.c (objcopy_internal_note): New structure.
	(gap_exists): New function.
	(is_open_note): New function.
	(is_func_note): New function.
	(is_64bit): New function.
	(merge_gnu_build_notes): Handle v3 notes.  Do not merge
	if there are relocations against the notes.
	* readelf.c (get_note_type): Use short names for build attribute
	notes.
	(print_symbol_for_build_attribute): Rename to
	get_symbol_for_build_attribute.  Returns the found symbol rather
	than printing it.
	(print_gnu_build_attribute_description): Maintain address ranges
	for function notes as well as global notes.  Handle v3 notes.
	(print_gnu_build_attribute_name): Use more space for printing the
	name in wide mode.
	* testsuite/binutils-all/note-2-32.s: Use .dc.l instead of .word.
	Eliminate symbol references in order to remove the need for
	relocations.
	* testsuite/binutils-all/note-2-64.s: Likewise.
	* testsuite/binutils-all/note-3-32.s: Add a size to the note_1
	symbol.
	* testsuite/binutils-all/note-3-64.s: Likewise.
	* testsuite/binutils-all/mips/mips-note-2r-n32.d: Update expected
	output.
	* testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise.
	* testsuite/binutils-all/mips/mips-note-2r.d: Likewise.
	* testsuite/binutils-all/note-2-32.d: Likewise.
	* testsuite/binutils-all/note-2-64.d: Likewise.
	* testsuite/binutils-all/note-3-32.d: Likewise.
	* testsuite/binutils-all/note-3-64.d: Likewise.
	* testsuite/binutils-all/note-4-64.s: New test.  Checks v3 notes.
	* testsuite/binutils-all/note-4-32.s: New test.
	* testsuite/binutils-all/note-4-64.d: New test result file.
	* testsuite/binutils-all/note-4-32.d: New test result file.
 2018-01-03 10:30:07 +00:00
Alan Modra
219d1afa89 Update year range in copyright notice of binutils files 2018-01-03 17:49:56 +10:30
Alan Modra
f795c49463 Test binutils_assemble return value 
This is a followup to "binutils nm testsuite tidy".  Since the perror
in binutils_assemble has been removed, we need to take more care in
failure paths.

The patch also fixed a number of .exp files that have multiple tests,
where an assembly failure returns from the .exp file.  In most cases
it is nicer to attempt all tests.

	* testsuite/binutils-all/ar.exp (unique_symbol): Don't run AR
	if assembly fails.
	* testsuite/binutils-all/arc/objdump.exp (check_assembly): If
	objfile is empty, fail test.
	* testsuite/binutils-all/arm/objdump.exp: Don't return if assembly
	fails for a test, continue on to other tests.
	* testsuite/binutils-all/bfin/objdump.exp: Likewise.
	* testsuite/binutils-all/hppa/objdump.exp: Likewise.
	* testsuite/binutils-all/m68k/objdump.exp: Likewise.
	* testsuite/binutils-all/vax/objdump.exp: Likewise.
	* testsuite/binutils-all/size.exp: Likewise.
	* testsuite/binutils-all/nm.exp: Likewise.  Move PR12753 test.
	* testsuite/binutils-all/objcopy.exp: Don't perror on assembly fail.
	* testsuite/binutils-all/objdump.exp: Report assembly fails.
 2017-12-19 06:51:33 +10:30
Alan Modra
4baeffab22 binutils nm testsuite tidy 
We can run the gnu_unique_object symbol test  on all ELF targets.
Those that don't support the symbol type and fail to assemble can just
be resolved as "unsupported".  This means binutils_assemble can't
report an error on assembly failure, but it probably should never have
done that anyway.

	* testsuite/lib/utils-lib.exp (default_binutils_assemble_flags):
	Don't perror on assembler diagnostic output.
	* testsuite/binutils-all/nm.exp: Run unique symbol test on all
	ELF targets.  Resolve as "unsupported" on assembly failure.
 2017-12-14 22:29:42 +10:30
Renlin Li
4c5ae11b42 [Binutils][Objdump]Check symbol section information while search a mapping symbol backward. 
When checking mapping symbols backwardly, the section which defines the symbol
is not considerted. This patch fixes this by moving the section checking code
into get_sym_code_type () function which is shared by forward and backword
mapping symbol searching.

opcodes/

2017-12-11  Petr Pavlu  <petr.pavlu@arm.com>
	    Renlin Li  <renlin.li@arm.com>

	* aarch64-dis.c (print_insn_aarch64): Move symbol section check ...
	(get_sym_code_type): Here.

binutils/

2017-12-11  Renlin Li  <renlin.li@arm.com>

	* testsuite/binutils-all/aarch64/objdump.d: New.
	* testsuite/binutils-all/aarch64/objdump.s: New.
 2017-12-11 15:42:47 +00:00
Nick Clifton
2d054e6bfd Fix stripping relocs in a file with mergeable notes. 
A recent Fedora bug (1520805) exposed a problem with objcopy's reloc
  copying code, when a binary also contains mergeable notes.  The note
  merging code would delete some relocs, but then the reloc copying code
  would try to put them back again, which did not work.

  So I am checking in the patch below to fix the problem.  The patch
  also tweaks one of the binutils note merging tests so that it is
  skipped for the Sparc64 target, since this has funky relocs.

binutils	* objcopy.c (copy_relocations_in_section): Use the orelocations
	field of the input section, if it has been initialised.
	* testsuite/binutils-all/note-2-64.d: Skip test on Sparc64.

bfd	* elfcode.h (elf_write_relocs): Check for an empty howto field.
 2017-12-08 10:07:14 +00:00
H.J. Lu
d6251545e2 Add a test for PR binutils/22451 
Check in the object file generated from the older assembler as a
compressed file.

	PR binutils/22451
	* testsuite/binutils-all/x86-64/objects.exp: New file.
	* testsuite/binutils-all/x86-64/pr22451.o.bz2: Likewise.
 2017-11-21 13:41:51 -08:00
claziss
bd560f571f [ARC] [COMMITTED] Update test pattern patching. 
2017-11-21  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/binutils-all/arc/objdump.exp: Update pattern matching
	expression.
 2017-11-21 15:04:22 +01:00
Nick Clifton
d85bf2ba86 Add ability to follow dwo links to readelf/objdump. 
* dwarf.c (dwo_name, dwo_dir, dwo_id, dwo_id_len): New variables.
	(read_and_display_attr_value): Record dwo variables if requested.
	(display_augmentation_data): Rename to display_data and make
	generic.
	(load_dwo_file): New function.  Loads a separate dwarf object
	file.
	(load_separate_debug_file): Add reporting and loading of separate
	dwarf objet files.
	* readelf.c (process_section_headers): Add do_debug_links to list
	of flags requiring a debug dump.
	(display_debug_section): Tidy up code.
	* doc/debug.options.texi: Add note that dwo links will also be
	followed.
	* testsuite/binutils-all/debuglink.s: Tidy code.
	* testsuite/binutils-all/dwo.s: New test file.
	* testsuite/binutils-all/readelf.wk2: New file - expected output
	from readelf.
	* testsuite/binutils-all/readelf.exp: Run the new test.
 2017-11-21 13:12:04 +00:00
Nick Clifton
dda8d76d0d Add support to readelf and objdump for following links to separate debug information files. 
Hi Guys,

  I am applying the rather large patch attached to this email to enhance
  the readelf and objdump programs so that they now have the ability to
  follow links to separate debug info files.  (As requested by PR
  15152).  So for example whereas before we had this output:

    $ readelf -wi main.exe

    Contents of the .debug_info section:
    [...]
    <15>   DW_AT_comp_dir    : (alt indirect string, offset: 0x30c)
    [...]

  With the new option enabled we get:

    $ readelf -wiK main.exe

    main.exe: Found separate debug info file: dwz.debug
    Contents of the .debug_info section (loaded from main.exe):
    [...]
    <15>   DW_AT_comp_dir    : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm
    [...]

  The link following feature also means that we can get two lots of
  output if the same section exists in both the main file and the
  separate debug info file:

    $ readelf -wiK main.exe
    main.exe: Found separate debug info file: dwz.debug
    Contents of the .debug_info section (loaded from main.exe):
    [...]
    Contents of the .debug_info section (loaded from dwz.debug):
    [...]

  The patch also adds the ability to display the contents of debuglink
  sections:

    $ readelf -wk main.exe
    Contents of the .gnu_debugaltlink section:

      Separate debug info file: dwz.debug
      Build-ID (0x14 bytes):
     c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93

  Naturally there are long versions of these options (=follow-links and
  =links).  The documentation has been updated as well, and since both
  readelf and objdump use the same set of debug display options, I have
  moved the text into a separate file.  There are also a couple of new
  binutils tests to exercise the new behaviour.

  There are a couple of missing features in the current patch however,
  although I do intend to address them in follow up submissions:

  Firstly the code does not check the build-id inside separate debug
  info files when it is searching for a file specified by a
  .gnu_debugaltlink section.  It just assumes that if the file is there,
  then it contains the information being sought.

  Secondly I have not checked the DWARF-5 version of these link
  features, so there will probably be code to add there.

  Thirdly I have only implemented link following for the
  DW_FORM_GNU_strp_alt format.  Other alternate formats (eg
  DW_FORM_GNU_ref_alt) have yet to be implemented.

  Lastly, whilst implementing this feature I found it necessary to move
  some of the global variables used by readelf (eg section_headers) into
  a structure that can be passed around.  I have moved all of the global
  variables that were necessary to get the patch working, but I need to
  complete the operation and move the remaining, file-specific variables
  (eg dynamic_strings).

Cheers
  Nick

binutils	PR 15152
	* dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink,
	gnu_debugaltlink and separate_debug_str.
	(struct dwarf_section): Add filename field.
	Add prototypes for load_separate_debug_file, close_debug_file and
	open_debug_file.
	* dwarf.c (do_debug_links): New.
	(do_follow_links): New.
	(separate_debug_file, separate_debug_filename): New.
	(fetch_alt_indirect_string): New function.  Retrieves a string
	from the debug string table in the separate debug info file.
	(read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt.
	(load_debug_section_with_follow): New function.  Like
	load_debug_section, but if the first attempt fails, then tries
	again in the separate debug info file.
	(introduce): New function.
	(process_debug_info): Use load_debug_section_with_follow and
	introduce.
	(load_debug_info): Likewise.
	(display_debug_lines_raw): Likewise.
	(display_debug_lines_decoded): Likewise.
	(display_debug_macinfo): Likewise.
	(display_debug_macro): Likewise.
	(display_debug_abbrev): Likewise.
	(display_debug_loc): Likewise.
	(display_debug_str): Likewise.
	(display_debug_aranges): Likewise.
	(display_debug_addr); Likewise.
	(display_debug_frames): Likewise.
	(display_gdb_index): Likewise.
	(process_cu_tu_index): Likewise.
	(load_cu_tu_indexes): Likewise.
	(display_debug_links): New function.  Displays the contents of a
	.gnu_debuglink or .gnu_debugaltlink section.
	(calc_gnu_debuglink_ctc32):New function.  Calculates a CRC32
	value.
	(check_gnu_debuglink): New function.  Checks the CRC of a
	potential separate debug info file.
	(parse_gnu_debuglink): New function.  Reads a CRC value out of a
	.gnu_debuglink section.
	(check_gnu_debugaltlink): New function.
	(parse_gnu_debugaltlink): New function.  Reads the build-id value
	out of a .gnu_debugaltlink section.
	(load_separate_debug_info): New function.  Finds and loads a
	separate debug info file.
	(load_separate_debug_file): New function. Attempts to find and
	follow a link to a separate debug info file.
	(free_debug_memory): Free the separate debug info file
	information.
	(opts_table): Add "follow-links" and "links".
	(dwarf_select_sections_by_letters): Add "k" and "K".
	(debug_displays): Reformat.  Add .gnu-debuglink and
	.gnu_debugaltlink.
	Add an extra entry for .debug_str in a separate debug info file.
	* doc/binutils.texi: Move description of debug dump features
	common to both readelf and objdump into...
	* objdump.c (usage): Add -Wk and -WK.
	(load_specific_debug_section): Initialise the filename field in
	the dwarf_section structure.
	(close_debug_file): New function.
	(open_debug_file): New function.
	(dump_dwarf): Load and dump the separate debug info sections.
	* readelf.c (struct filedata): New structure.  Contains various
	variables that used to be global:
	(current_file_size, string_table, string_table_length, elf_header)
	(section_headers, program_headers, dump_sects, num_dump_sects):
	Move into filedata structure.
	(cmdline): New global variable.  Contains list of sections to dump
	by number, as specified on the command line.
	Add filedata parameter to most functions.
	(load_debug_section): Load the string table if it has not already
	been retrieved.
	(close_file): New function.
	(close_debug_file): New function.
	(open_file): New function.
	(open_debug_file): New function.
	(process_object): Process sections in any separate debug info files.
	* doc/debug.options.texi: New file.  Add description of =links and
	=follow-links options.
	* NEWS: Mention the new feature.
	* elfcomm.c: Have the byte gte functions take a const pointer.
	* elfcomm.h: Update prototypes.
	* testsuite/binutils-all/dw5.W: Update expected output.
	* testsuite/binutils-all/objdump.WL: Update expected output.
	* testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk.
	* testsuite/binutils-all/readelf.exp: Add test of -wK and -wk.
	* testsuite/binutils-all/readelf.k: New file.
	* testsuite/binutils-all/objdump.Wk: New file.
	* testsuite/binutils-all/objdump.WK2: New file.
	* testsuite/binutils-all/linkdebug.s: New file.
	* testsuite/binutils-all/debuglink.s: New file.

gas	* testsuite/gas/avr/large-debug-line-table.d: Update expected
	output.
	* testsuite/gas/elf/dwarf2-11.d: Likewise.
	* testsuite/gas/elf/dwarf2-12.d: Likewise.
	* testsuite/gas/elf/dwarf2-13.d: Likewise.
	* testsuite/gas/elf/dwarf2-14.d: Likewise.
	* testsuite/gas/elf/dwarf2-15.d: Likewise.
	* testsuite/gas/elf/dwarf2-16.d: Likewise.
	* testsuite/gas/elf/dwarf2-17.d: Likewise.
	* testsuite/gas/elf/dwarf2-18.d: Likewise.
	* testsuite/gas/elf/dwarf2-5.d: Likewise.
	* testsuite/gas/elf/dwarf2-6.d: Likewise.
	* testsuite/gas/elf/dwarf2-7.d: Likewise.

ld	* testsuite/ld-avr/gc-section-debugline.d: Update expected
	output.
 2017-11-15 11:34:03 +00:00
Jim Wilson
f617a0f6ce Fix riscv binutils xfail for debug_ranges test. 
binutils/
	* testsuite/binutils-all/objdump.exp: Expect the debug_ranges test to
	pass.
 2017-11-10 19:24:45 -08:00
Alan Modra
d3a49aa80b readelf ngettext fixes 
This patch is a first pass at fixing readelf message pluralization.
I've deliberately not fixed the "out of memory" errors since it's very
unlikely that they will ever be complaining about not being able to
allocate for a single entry, and a few others where the size is very
unlikely to be 1 byte.

Then there are messages like this one:
"Out of %lu items there are %zu bucket clashes (longest of %zu entries).\n"
I suppose this could be split into three parts, "Of %lu items ",
"there are %zu bucket clashes ", and "(longest of %zu entries).\n",
each part being printed separately, but that might not be ideal for
sentence construction in other languages.  For now I'm punting on this
one.

Changes to readelf output require lots of testsuite adjustment..

binutils/
	* dwarf.c (read_uleb128): Properly pluralize messages.
	(display_debug_lines_raw, display_debug_loc): Likewise.
	(display_debug_names, process_cu_tu_index): Likewise.
	* od-macho.c (dump_code_signature_superblob): Likewise.
	* readelf.c (process_program_headers): Likewise.
	(process_section_header, process_relocs): Likewise.
	(hppa_process_unwind, arm_process_unwind): Likewise.
	(process_dynamic_section, process_version_sections): Likewise.
	(process_symbol_table, process_syminfo): Likewise.
	(apply_relocations, process_mips_specific): Likewise.
	(process_gnu_liblist, process_notes_at): Likewise.
	(process_archive): Likewise.
	* testsuite/binutils-all/dw2-1.W,
	* testsuite/binutils-all/dw2-3.W,
	* testsuite/binutils-all/dw2-3gabi.W,
	* testsuite/binutils-all/dw5.S,
	* testsuite/binutils-all/dw5.W,
	* testsuite/binutils-all/i386/compressed-1a.d,
	* testsuite/binutils-all/libdw2-compressedgabi.out,
	* testsuite/binutils-all/objdump.W,
	* testsuite/binutils-all/readelf.r,
	* testsuite/binutils-all/readelf.r-64,
	* testsuite/binutils-all/x86-64/compressed-1a.d: Update
	for pluralization fixes.
gas/
	* testsuite/gas/arm/got_prel.d,
	* testsuite/gas/elf/dwarf2-1.d,
	* testsuite/gas/elf/dwarf2-2.d,
	* testsuite/gas/elf/dwarf2-3.d,
	* testsuite/gas/elf/dwarf2-5.d,
	* testsuite/gas/elf/dwarf2-6.d,
	* testsuite/gas/i386/debug1.d,
	* testsuite/gas/i386/dw2-compress-1.d,
	* testsuite/gas/i386/dw2-compress-3a.d,
	* testsuite/gas/i386/dw2-compress-3b.d,
	* testsuite/gas/i386/dw2-compressed-1.d,
	* testsuite/gas/i386/dw2-compressed-3a.d,
	* testsuite/gas/i386/dw2-compressed-3b.d,
	* testsuite/gas/i386/ilp32/x86-64-localpic.d,
	* testsuite/gas/i386/localpic.d,
	* testsuite/gas/i386/x86-64-localpic.d,
	* testsuite/gas/ia64/pr13167.d,
	* testsuite/gas/mips/loc-swap-2.d,
	* testsuite/gas/mips/loc-swap.d,
	* testsuite/gas/mips/micromips@loc-swap-2.d,
	* testsuite/gas/mips/micromips@loc-swap.d,
	* testsuite/gas/mips/mips16-dwarf2-n32.d,
	* testsuite/gas/mips/mips16-dwarf2.d,
	* testsuite/gas/mips/mips16@loc-swap-2.d,
	* testsuite/gas/mips/mips16@loc-swap.d,
	* testsuite/gas/mips/mips16e@loc-swap.d,
	* testsuite/gas/mmix/bspec-1.d,
	* testsuite/gas/mmix/bspec-2.d,
	* testsuite/gas/tic6x/unwind-1.d,
	* testsuite/gas/tic6x/unwind-2.d,
	* testsuite/gas/tic6x/unwind-3.d: Update for pluralization
	fixes.
ld/
	* testsuite/ld-aarch64/ifunc-13.d,
	* testsuite/ld-aarch64/ifunc-15.d,
	* testsuite/ld-aarch64/ifunc-20.d,
	* testsuite/ld-alpha/tlsbin.rd,
	* testsuite/ld-alpha/tlspic.rd,
	* testsuite/ld-arm/ifunc-3.rd,
	* testsuite/ld-arm/ifunc-9.rd,
	* testsuite/ld-arm/unwind-mix.d,
	* testsuite/ld-arm/unwind-rel.d,
	* testsuite/ld-cris/hiddef1.d,
	* testsuite/ld-cris/libdso-13.d,
	* testsuite/ld-cris/libdso-2.d,
	* testsuite/ld-cris/pr16044.d,
	* testsuite/ld-cris/tls-local-63.d,
	* testsuite/ld-cris/tls-local-64.d,
	* testsuite/ld-cris/tls-und-38.d,
	* testsuite/ld-cris/tls-und-42.d,
	* testsuite/ld-cris/tls-und-46.d,
	* testsuite/ld-cris/tls-und-50.d,
	* testsuite/ld-cris/weakref3.d,
	* testsuite/ld-cris/weakref4.d,
	* testsuite/ld-elf/comm-data2r.rd,
	* testsuite/ld-elf/discard1.d,
	* testsuite/ld-elf/discard2.d,
	* testsuite/ld-elf/pr19539.d,
	* testsuite/ld-elf/pr22374-1.r,
	* testsuite/ld-elf/pr22374-2.r,
	* testsuite/ld-i386/combreloc.d,
	* testsuite/ld-i386/emit-relocs-nacl.rd,
	* testsuite/ld-i386/emit-relocs.rd,
	* testsuite/ld-i386/pr13302.d,
	* testsuite/ld-i386/pr17709-nacl.rd,
	* testsuite/ld-i386/pr17709.rd,
	* testsuite/ld-i386/pr19539.d,
	* testsuite/ld-i386/pr19615.d,
	* testsuite/ld-i386/pr19636-1a.d,
	* testsuite/ld-i386/pr19636-1e.d,
	* testsuite/ld-i386/pr19636-1f.d,
	* testsuite/ld-i386/pr19636-2a.d,
	* testsuite/ld-i386/pr19636-2b.d,
	* testsuite/ld-i386/pr19636-2d-nacl.d,
	* testsuite/ld-i386/pr19636-2e-nacl.d,
	* testsuite/ld-i386/pr19636-3a.d,
	* testsuite/ld-i386/pr19636-3d.d,
	* testsuite/ld-i386/pr19636-3e.d,
	* testsuite/ld-i386/pr19636-4a.d,
	* testsuite/ld-i386/pr19645.d,
	* testsuite/ld-i386/pr19827-nacl.rd,
	* testsuite/ld-i386/pr19827.rd,
	* testsuite/ld-i386/pr20253-4a.d,
	* testsuite/ld-i386/pr20253-4b.d,
	* testsuite/ld-i386/pr20253-5.d,
	* testsuite/ld-i386/tlsbin-nacl.rd,
	* testsuite/ld-i386/tlsbin.rd,
	* testsuite/ld-i386/tlspic-nacl.rd,
	* testsuite/ld-i386/tlspic.rd,
	* testsuite/ld-i386/undefweakb.d,
	* testsuite/ld-ia64/tlsbin.rd,
	* testsuite/ld-ia64/tlspic.rd,
	* testsuite/ld-ifunc/ifunc-13-i386.d,
	* testsuite/ld-ifunc/ifunc-13-x86-64.d,
	* testsuite/ld-ifunc/ifunc-15-i386.d,
	* testsuite/ld-ifunc/ifunc-15-x86-64.d,
	* testsuite/ld-ifunc/ifunc-20-i386.d,
	* testsuite/ld-ifunc/ifunc-20-x86-64.d,
	* testsuite/ld-ifunc/ifunc-23a-x86.d,
	* testsuite/ld-ifunc/ifunc-23b-x86.d,
	* testsuite/ld-ifunc/ifunc-23c-x86.d,
	* testsuite/ld-ifunc/ifunc-24a-x86.d,
	* testsuite/ld-ifunc/ifunc-24b-x86.d,
	* testsuite/ld-ifunc/ifunc-24c-x86.d,
	* testsuite/ld-ifunc/ifunc-25a-x86.d,
	* testsuite/ld-ifunc/ifunc-25b-x86.d,
	* testsuite/ld-ifunc/ifunc-25c-x86.d,
	* testsuite/ld-m68k/got-1.d,
	* testsuite/ld-mips-elf/vxworks1.rd,
	* testsuite/ld-powerpc/ambiguousv1.d,
	* testsuite/ld-powerpc/ambiguousv1b.d,
	* testsuite/ld-powerpc/ambiguousv2.d,
	* testsuite/ld-powerpc/ambiguousv2b.d,
	* testsuite/ld-powerpc/tlsexe.r,
	* testsuite/ld-powerpc/tlsexe32.r,
	* testsuite/ld-powerpc/tlsexetoc.r,
	* testsuite/ld-powerpc/tlsso.r,
	* testsuite/ld-powerpc/tlsso32.r,
	* testsuite/ld-powerpc/tlstocso.r,
	* testsuite/ld-powerpc/vle-multiseg-1.d,
	* testsuite/ld-powerpc/vle-multiseg-2.d,
	* testsuite/ld-powerpc/vle-multiseg-3.d,
	* testsuite/ld-s390/tlsbin.rd,
	* testsuite/ld-s390/tlsbin_64.rd,
	* testsuite/ld-s390/tlspic.rd,
	* testsuite/ld-s390/tlspic_64.rd,
	* testsuite/ld-sh/ld-r-1.d,
	* testsuite/ld-sh/sh64/gotplt.d,
	* testsuite/ld-sh/shared-1.d,
	* testsuite/ld-sh/tlsbin-2.d,
	* testsuite/ld-sh/tlspic-2.d,
	* testsuite/ld-sparc/gotop32.rd,
	* testsuite/ld-sparc/gotop64.rd,
	* testsuite/ld-sparc/tlssunpic32.rd,
	* testsuite/ld-sparc/tlssunpic64.rd,
	* testsuite/ld-sparc/vxworks1-lib.rd,
	* testsuite/ld-tic6x/shlib-app-1.rd,
	* testsuite/ld-tic6x/shlib-app-1b.rd,
	* testsuite/ld-tic6x/shlib-app-1r.rd,
	* testsuite/ld-tic6x/shlib-app-1rb.rd,
	* testsuite/ld-tic6x/shlib-noindex.rd,
	* testsuite/ld-vax-elf/export-class-data.rd,
	* testsuite/ld-x86-64/pr13082-1a.d,
	* testsuite/ld-x86-64/pr13082-1b.d,
	* testsuite/ld-x86-64/pr13082-2a.d,
	* testsuite/ld-x86-64/pr13082-2b.d,
	* testsuite/ld-x86-64/pr13082-3a.d,
	* testsuite/ld-x86-64/pr13082-3c.d,
	* testsuite/ld-x86-64/pr13082-4a.d,
	* testsuite/ld-x86-64/pr13082-5a.d,
	* testsuite/ld-x86-64/pr13082-5b.d,
	* testsuite/ld-x86-64/pr13082-6a.d,
	* testsuite/ld-x86-64/pr13082-6b.d,
	* testsuite/ld-x86-64/pr17709-nacl.rd,
	* testsuite/ld-x86-64/pr17709.rd,
	* testsuite/ld-x86-64/pr19539a.d,
	* testsuite/ld-x86-64/pr19539b.d,
	* testsuite/ld-x86-64/pr19615.d,
	* testsuite/ld-x86-64/pr19636-1a.d,
	* testsuite/ld-x86-64/pr19636-1d.d,
	* testsuite/ld-x86-64/pr19636-1e.d,
	* testsuite/ld-x86-64/pr19636-2a.d,
	* testsuite/ld-x86-64/pr19636-2e.d,
	* testsuite/ld-x86-64/pr19636-2f.d,
	* testsuite/ld-x86-64/pr19636-3a.d,
	* testsuite/ld-x86-64/pr19645.d,
	* testsuite/ld-x86-64/pr19807-2b.d,
	* testsuite/ld-x86-64/pr19807-2d.d,
	* testsuite/ld-x86-64/pr19827-nacl.rd,
	* testsuite/ld-x86-64/pr19827.rd,
	* testsuite/ld-x86-64/pr20253-4a.d,
	* testsuite/ld-x86-64/pr20253-4b.d,
	* testsuite/ld-x86-64/pr20253-4d.d,
	* testsuite/ld-x86-64/pr20253-4e.d,
	* testsuite/ld-x86-64/pr20253-5a.d,
	* testsuite/ld-x86-64/pr20253-5b.d,
	* testsuite/ld-x86-64/tlsbin-nacl.rd,
	* testsuite/ld-x86-64/tlsbin.rd,
	* testsuite/ld-x86-64/tlspic-nacl.rd,
	* testsuite/ld-x86-64/tlspic.rd,
	* testsuite/ld-x86-64/tlspic2-nacl.rd: Update for
	pluralization fixes.
 2017-11-07 17:01:16 +10:30
claziss
fdddd2900f [ARC] Force the disassam to use the hexadecimal number for printing 
Force printing of the short/signed values using hexadecimal
representation via disassembler option.

opcode/
2017-11-03  Claudiu Zissulescu  <claziss@synopsys.com>

        * arc-dis.c (print_hex): New variable.
        (parse_option): Check for hex option.
        (print_insn_arc): Use hexadecimal representation for short
        immediate values when requested.
        (print_arc_disassembler_options): Add hex option to the list.

binutils/
2017-11-03  Claudiu Zissulescu  <claziss@synopsys.com>

        * doc/binutils.texi (ARC): Update disassembler options.
        * testsuite/binutils-all/arc/hexprint.s: New file.
        * testsuite/binutils-all/arc/objdump.exp: Test hex printing feature.
 2017-11-03 15:36:54 +01:00
Nick Clifton
04914e3707 Display more information when decoding DW_AT_endianity, DW_AT_decimal_sign, DW_AT_defaulted and DW_AT_discr_list DWARF attributes. 
* dwarf.c (read_and_display_attr_value): Handle DW_AT_endianity,
	DW_END_default, DW_END_big, DW_END_little, DW_ATE_UCS,
	DW_ATE_ASCII, DW_CC_pass_by_reference, DW_CC_pass_by_value,
	DW_CC_GNU_renesas_sh, DW_CC_GNU_borland_fastcall_i386,
	DW_AT_decimal_sign, DW_AT_defaulted, DW_AT_discr_list.
	(get_TAG_name): Report user generated tag values.
	* testsuite/binutils-all/dwarf-attributes.S: New test.
	* testsuite/binutils-all/dwarf-attributes.W. Expected output from
	readelf.
	* testsuite/binutils-all/readelf.exp: Run the new test.
 2017-10-11 12:02:51 +01:00
Alexandre Oliva
9f27220911 LVU: dump loclists with locviews 
When dumping location lists, also dump locview lists that may be
interspersed with them, and bring view pairs next to the corresponding
location list entries.

This patch supports DW_AT_GNU_locviews as a separate attribute for
DWARF4- loc_lists and split (dwo) loclists, as well as DWARF5
loclists.

It also supports, in DWARF5 loclists, the proposed
DW_LLE_GNU_view_pair loclist entry type proposed for DWARF6.


The tests use 32-bit DWARF, even on 64-bit targets, resolving offsets
to constants so as to reduce the risk that relocations be created for
them, or that the offsets be rejected as nonconstants.


The patch also adds an xfail to an unrelated test, namely dw5, so that
no unexpected fails remain on nds32*-elf, one of the tested targets.


Reviewed-by: Alan Modra <amodra@gmail.com>


for  include/ChangeLog

	* dwarf2.def (DW_AT_GNU_locviews): New.
	* dwarf2.h (enum dwarf_location_list_entry_type): Add
	DW_LLE_GNU_view_pair.
	(DW_LLE_view_pair): Define.

for  binutils/ChangeLog

	* dwarf.h (debug_info): Add loc_views and num_loc_views.
	* dwarf.c (vm1): New constant.
	(print_dwarf_view): New function.
	(read_and_display_attr_value): Support DW_AT_GNU_locviews.
	(process_debug_info): Keep num_loc_offsets and num_loc_views
	in sync.
	(display_view_pair_list): New function.
	(display_loc_list_dwo): Take vstart_ptr; update it.  Dump
	location view pairs before the range they apply to, when a
	viewlist augments the loc list.
	(display_loc_list): Likewise.  Check view numbers in range
	tests.
	(display_loclists_list): Likewise.  Handle view pair entries,
	and warn on trailing ones.
	(loc_views): New variable.
	(loc_offsets_compar): Compare loc_views if loc_offsets are the
	same.
	(display_debug_loc): Check and sort loc_views too.  Accept
	loc_view as expected_start.  Skip if lists and views are the
	same.  Dump locview list separately in order, and pass the
	locview list base to each list dump function.  Warn and skip
	overlap and hole checking if we find loclists and locviews to
	not be adjacent.
	* testsuite/binutils-all/locview-1.s: New.
	* testsuite/binutils-all/readelf.locview-1: New.
	* testsuite/binutils-all/locview-2.s: New.
	* testsuite/binutils-all/readelf.locview-2: New.
	* testsuite/binutils-all/readelf.exp: Run new tests.  Fix
	option spelling in pr18374 fail message.  XFAIL dw5 test on
	nds32*-elf.
 2017-09-22 17:05:51 -03:00
Alan Modra
11bb0c7abc readelf tests 
We have multiple tests that report failure to assemble without saying
exactly what test is failing.

	* testsuite/binutils-all/readelf.exp: Don't perror and exit on
	bintest.s assembly failure.  Report tests unresolved instead.
	Likewise for version note test, pr18374, decompress, and dw5
	tests.
	(readelf_test): Set testname to include both option and binary
	file name.  Use for pass/fail.
 2017-09-22 11:45:55 +09:30
Nick Clifton
714da62f64 Add test of V2 GNU build attribute notes. 
* testsuite/binutils-all/note-3-64.s: New test.  Checks assembly
	and decoding of version2 GNU build attribute notes.
	* testsuite/binutils-all/note-3-32.s: New test.  32-bit version of
	the above test.
	* testsuite/binutils-all/note-3-64.d: New test driver.
	* testsuite/binutils-all/note-3-32.d: New test driver.
	* testsuite/binutils-all/objcopy.exp: Run the new test.
	* readelf.c (is_64bit_abs_reloc): Add R_SPARC_64.
 2017-08-17 14:51:31 +01:00
Nick Clifton
75800d2cd6 Fix gas and binutils testsuite failures for am33_2.0-linux target. 
gas	* testsuite/gas/all/gas.exp: Add am33 to the skip lists of tests
	passed over by the mn10300 target.
	* testsuite/gas/elf/elf.exp: Likewise.
	* testsuite/gas/elf/dwarf2-11.d: Correct skip of am33 target.
	* testsuite/gas/elf/dwarf2-12.d: Likewise.
	* testsuite/gas/elf/dwarf2-13.d: Likewise.
	* testsuite/gas/elf/dwarf2-14.d: Likewise.
	* testsuite/gas/elf/dwarf2-15.d: Likewise.
	* testsuite/gas/elf/dwarf2-16.d: Likewise.
	* testsuite/gas/elf/dwarf2-17.d: Likewise.
	* testsuite/gas/elf/dwarf2-18.d: Likewise.
	* testsuite/gas/elf/dwarf2-5.d: Likewise.
	* testsuite/gas/elf/dwarf2-6.d: Likewise.
	* testsuite/gas/elf/dwarf2-7.d: Likewise.

binutils * testsuite/binutils-all/objdump.exp (cpus_expected): Add am33-2.
 2017-08-02 10:19:22 +01:00
Alexandre Oliva
ba8826a82a This patch introduces support for specifing views in .loc directives, so that the compiler can use the assembler to generate line number information and have the assembler determine view numbers to multiple views at the same program counter. 
binutils* dwarf.c (struct State_Machine_Registers): Add view field.
	(reset_state_machine): Reset view.
	(process_extended_line_op): Reset view when appropriate.
	(display_debug_lines_raw): Increment or reset view when appropriate.
	Print nonzero views.  Support print view resets, disabled by default.
	(display_debug_lines_decoded): Likewise.  Disambiguate op_code tests,
	enabling printing of end_sequence.
	* testsuite/binutils-all/dw2-1.W: Add nonzero views.
	* testsuite/binutils-all/dw2-3.W: Likewise.
	* testsuite/binutils-all/dw2-3gabi.W: Likewise.
	* testsuite/binutils-all/dw5.W: Add end sequence lines.
	* testsuite/binutils-all/i386/compressed-1a.d: Add nonzero views.
	* testsuite/binutils-all/libdw2-compressedgabi.out: Likewise.
	* testsuite/binutils-all/objdump.W: Likewise.
	* testsuite/binutils-all/objdump.WL: Add end sequence lines.
	* testsuite/binutils-all/x86-64/compressed-1a.d: Add nonzero views.

gas	* doc/as.texinfo (.loc): Document view support.
	* dwarf2dbg.c (unused): Check offset of next in struct line_entry.
	(current): Initialize view.
	(force_reset_view, view_assert_failed): New variables.
	(reverse_line_entry_list): New function.
	(set_or_check_view): Likewise.
	(dwarf2_gen_line_info_1): Call it.
	(dwarf2_where): Set view to NULL.
	(dwarf2_emit_insn): Return early when called before first file.
	(dwarf2_directive_loc): Add view support.  Emit insn
	immediately when view option is given.
	(process_entries): Avoid set_address to reset view when a known
	address change already implies the view reset.
	(dwarf2dbg_final_check): New function.
	* dwarf2dbg.h (struct dwarf2_line_info): Add view.
	(dwarf2dbg_final_check): Declare.
	* read.c (s_leb128): Parse expression as deferred.
	* testsuite/gas/all/gas.exp: Run sleb128-9.
	* testsuite/gas/all/sleb128-9.d: New.
	* testsuite/gas/all/sleb128-9.l: New.
	* testsuite/gas/all/sleb128-9.s: New.
	* testsuite/gas/elf/dwarf2-1.d: Add nonzero views.
	* testsuite/gas/elf/dwarf2-2.d: Likewise.
	* testsuite/gas/elf/dwarf2-5.d: New.
	* testsuite/gas/elf/dwarf2-5.s: New.
	* testsuite/gas/elf/dwarf2-6.d: New.
	* testsuite/gas/elf/dwarf2-6.s: New.
	* testsuite/gas/elf/dwarf2-7.d: New.
	* testsuite/gas/elf/dwarf2-7.s: New.
	* testsuite/gas/elf/dwarf2-8.d: New.
	* testsuite/gas/elf/dwarf2-8.l: New.
	* testsuite/gas/elf/dwarf2-8.s: New.
	* testsuite/gas/elf/dwarf2-9.d: New.
	* testsuite/gas/elf/dwarf2-9.l: New.
	* testsuite/gas/elf/dwarf2-9.s: New.
	* testsuite/gas/elf/dwarf2-10.d: New.
	* testsuite/gas/elf/dwarf2-10.l: New.
	* testsuite/gas/elf/dwarf2-10.s: New.
	* testsuite/gas/elf/dwarf2-11.d: New.
	* testsuite/gas/elf/dwarf2-11.s: New.
	* testsuite/gas/elf/dwarf2-12.d: New.
	* testsuite/gas/elf/dwarf2-12.s: New.
	* testsuite/gas/elf/dwarf2-13.d: New.
	* testsuite/gas/elf/dwarf2-13.s: New.
	* testsuite/gas/elf/dwarf2-14.d: New.
	* testsuite/gas/elf/dwarf2-14.s: New.
	* testsuite/gas/elf/dwarf2-15.d: New.
	* testsuite/gas/elf/dwarf2-15.s: New.
	* testsuite/gas/elf/dwarf2-16.d: New.
	* testsuite/gas/elf/dwarf2-16.s: New.
	* testsuite/gas/elf/dwarf2-17.d: New.
	* testsuite/gas/elf/dwarf2-17.s: New.
	* testsuite/gas/elf/dwarf2-18.d: New.
	* testsuite/gas/elf/dwarf2-18.s: New.
	* testsuite/gas/elf/elf.exp: Run dwarf2-5..18 tests.
	* testsuite/gas/i386/dw2-compress-1.d: Add nonzero views.
	* testsuite/gas/i386/dw2-compressed-1.d: Likewise.
	* testsuite/gas/i386/ilp32/lns/lns-duplicate.d: Likewise.
	* testsuite/gas/lns/lns-big-delta.d: Likewise.
	* testsuite/gas/lns/lns-duplicate.d: Likewise.
	* testsuite/gas/mips/loc-swap-2.d: Likewise.
	* testsuite/gas/mips/loc-swap-3.d: Likewise.
	* testsuite/gas/mips/loc-swap.d: Likewise.
	* testsuite/gas/mips/micromips@loc-swap-2.d: Likewise.
	* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
	* testsuite/gas/mips/mips16@loc-swap-2.d: Likewise.
	* testsuite/gas/mips/mips16@loc-swap.d: Likewise.
	* testsuite/gas/mips/mips16e@loc-swap.d: Likewise.
	* write.c (write_object_file): Check pending view asserts.
	(cvt_frag_to_fill): Complain about undefined leb128 operand.
 2017-07-21 10:13:18 +01:00
Yuri Chornovian
de194d8575 Fix spelling typos. 2017-07-18 16:58:14 +01:00
H.J. Lu
a502b0bbb8 Always delete $testarchive first 
Always delete $testarchive first so that it exists only when it is
supported,

	* testsuite/binutils-all/objdump.exp: Always delete $testarchive
	first.
 2017-07-13 08:10:57 -07:00
Maciej W. Rozycki
9785fc2a4d MIPS: Fix XPA base and Virtualization ASE instruction handling 
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.

For example this source assembles successfully as shown below:

$ cat xpa.s
	mfhc0	$2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o

xpa.o:     file format elf32-tradbigmips

Disassembly of section .text:

00000000 <.text>:
   0:	40420800 	mfhc0	v0,c0_random
	...
$

To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table.  Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).

Now the same source is correctly rejected unless the `-mxpa' option is
also used:

$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$

Add test cases for XPA base and XPA Virtualization ASE instructions.

Parts of this change by Andrew Bennett.

	include/
	* opcode/mips.h (ASE_XPA_VIRT): New macro.

	opcodes/
	* mips-dis.c (mips_calculate_combination_ases): Handle the
	ASE_XPA_VIRT flag.
	(parse_mips_ase_option): New function.
	(parse_mips_dis_option): Factor out ASE option handling to the
	new function.  Call `mips_calculate_combination_ases'.
	* mips-opc.c (XPAVZ): New macro.
	(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
	"mfhgc0", "mthc0" and "mthgc0".

	gas/
	* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
	* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
	flags.  Add `-mvirt' to `as' flags.
	* testsuite/gas/mips/xpa-err.d: New test.
	* testsuite/gas/mips/xpa-virt-err.d: New test.
	* testsuite/gas/mips/xpa-err.l: New stderr output.
	* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
	* testsuite/gas/mips/xpa-err.s: New test source.
	* testsuite/gas/mips/xpa-virt-err.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

	binutils/
	* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
	* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
	* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
	* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
	* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.
 2017-06-30 07:21:55 +01:00
Anton Kolesov
e1e94c4994 [ARC] Fix handling of cpu=... disassembler option value 
There is a bug in handling of cpu=... disassembler option in case there are
other options after it, for example, `cpu=EM,dsp'.  In this case `EM,dsp' is
treated as an option value, and strcasecmp reports is as non-equal to "EM".
This is fixed by using disassembler_options_cmp function, which compares string
treating `,' the same way as `\0'.

This function also solves a problem with option order in parse_option.
Previously, if several option had same prefix (e.g. fpud, fpuda), then the
longer one should have been compared first, otherwise when longer option is
passed it would be treated as a short one, because

  CONST_STRNEQ ("fpud", "fpuda")

would be true.  The order of options was correct for ARC, so there were no
bugs per se, but with disassembler_option_cmp there is no risk of such a bug
being introduced in the future.

opcodes/ChangeLog:

yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

	* arc-dis.c (parse_option): Use disassembler_options_cmp to compare
	disassembler option strings.
	(parse_cpu_option): Likewise.

binutils/ChangeLog

yyyy-mm-dd  Anton Kolesov  <Anton.Kolesov@synopsys.com>

	* testsuite/binutils-all/arc/double_store.s: New file.
	* testsuite/binutils-all/arc/objdump.exp: Tests for disassembler
	options.
	(do_objfile): New function.
	(check_assembly): Likewise.
 2017-06-29 14:49:39 +03:00
H.J. Lu
48580982ef x86: Support Intel Shadow Stack with SHSTK property 
To support Intel Shadow Stack (SHSTK) in Intel Control-flow Enforcement
Technology (CET) instructions:

https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf

 #define GNU_PROPERTY_X86_FEATURE_1_SHSTK (1U << 1)

is added to GNU program properties to indicate that all executable sections
are compatible with SHSTK where return address popped from shadow stack
always matches return address popped from normal stack.

GNU_PROPERTY_X86_FEATURE_1_SHSTK is set on output only if it is set on all
relocatable inputs.

bfd/

	* elf32-i386.c (elf_i386_merge_gnu_properties): If info->shstk
	is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
	(elf_i386_link_setup_gnu_properties): If info->shstk is set,
	turn on GNU_PROPERTY_X86_FEATURE_1_IBT.
	* elf64-x86-64.c (elf_x86_64_merge_gnu_properties): If
	info->shstk is set, turn on GNU_PROPERTY_X86_FEATURE_1_SHSTK.
	(elf_x86_64_link_setup_gnu_properties): If info->shstk is set,
	turn on GNU_PROPERTY_X86_FEATURE_1_IBT.

binutils/

	* readelf.c (decode_x86_feature): Decode
	GNU_PROPERTY_X86_FEATURE_1_SHSTK.
	* testsuite/binutils-all/i386/shstk.d: New file.
	* testsuite/binutils-all/i386/shstk.s: Likewise.
	* testsuite/binutils-all/x86-64/shstk-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/shstk.d: Likewise.
	* testsuite/binutils-all/x86-64/shstk.s: Likewise.

include/

	* bfdlink.h (bfd_link_info): Add shstk.
	* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_SHSTK): New.

ld/

	* NEWS: Mention -z shstk and GNU_PROPERTY_X86_FEATURE_1_SHSTK.
	* emulparams/cet.sh (PARSE_AND_LIST_OPTIONS_CET): Add "-z shstk".
	(PARSE_AND_LIST_ARGS_CASE_Z_CET): Support "-z shstk".
	* ld.texinfo: Document -z shstk.
	* testsuite/ld-i386/i386.exp: Run SHSTK tests.
	* testsuite/ld-x86-64/x86-64.exp: Likewise.
	* testsuite/ld-i386/property-x86-shstk.s: New file.
	* testsuite/ld-i386/property-x86-shstk1a.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk1b.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk2.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk3a.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk3b.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk4.d: Likewise.
	* testsuite/ld-i386/property-x86-shstk5.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk.s: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk2.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk4.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-shstk5.d: Likewise.
 2017-06-22 05:50:31 -07:00
H.J. Lu
ee2fdd6f36 x86: Support Intel IBT with IBT property and IBT-enable PLT 
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:

https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf

 #define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002

 #define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)

are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.

GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.

The followings changes are made to the Procedure Linkage Table (PLT):

1. For 64-bit x86-64,  PLT is changed to

PLT0:  push       GOT[1]
       bnd jmp    *GOT[2]
       nop
...
PLTn:  endbr64
       push       namen_reloc_index
       bnd jmp    PLT0

together with the second PLT section:

PLTn:  endbr64
       bnd jmp   *GOT[namen_index]
       nop

BND prefix is also added so that IBT-enabled PLT is compatible with MPX.

2. For 32-bit x86-64 (x32) and i386,  PLT is changed to

PLT0:  push       GOT[1]
       jmp        *GOT[2]
       nop
...
PLTn:  endbr64                                 # endbr32 for i386.
       push       namen_reloc_index
       jmp        PLT0

together with the second PLT section:

PLTn:  endbr64                                 # endbr32 for i386.
       jmp       *GOT[namen_index]
       nop

BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.

GOT is an array of addresses.  Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section.  The function, namen, is called via the
ENDBR instruction in the second PLT entry.  GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.

2 linker command line options are added:

1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.

bfd/

	* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
	(elf_i386_lazy_ibt_plt_entry): Likewise.
	(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
	(elf_i386_non_lazy_ibt_plt_entry): Likewise.
	(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
	(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
	(elf_i386_lazy_plt_layout): Likewise.
	(elf_i386_non_lazy_plt_layout): Likewise.
	(elf_i386_link_hash_entry): Add plt_second.
	(elf_i386_link_hash_table): Add plt_second and
	plt_second_eh_frame.
	(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
	(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
	the second PLT.  Check the second PLT.
	(elf_i386_relocate_section): Use the second PLT to resolve
	PLT reference if needed.
	(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
	needed.
	(elf_i386_finish_dynamic_sections): Set sh_entsize on the
	second PLT.  Generate unwind info for the second PLT.
	(elf_i386_plt_type): Add plt_second.
	(elf_i386_get_synthetic_symtab): Support the second PLT.
	(elf_i386_parse_gnu_properties): Support
	GNU_PROPERTY_X86_FEATURE_1_AND.
	(elf_i386_merge_gnu_properties): Support
	GNU_PROPERTY_X86_FEATURE_1_AND.  If info->ibt is set, turn
	on GNU_PROPERTY_X86_FEATURE_1_IBT
	(elf_i386_link_setup_gnu_properties): If info->ibt is set,
	turn on GNU_PROPERTY_X86_FEATURE_1_IBT.  Use IBT-enabled PLT
	for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
	is set on all relocatable inputs.
	* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
	(elf_x32_lazy_ibt_plt_entry): Likewise.
	(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
	(elf_x32_non_lazy_ibt_plt_entry): Likewise.
	(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
	(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
	(elf_x86_64_lazy_ibt_plt): Likewise.
	(elf_x32_lazy_ibt_plt): Likewise.
	(elf_x86_64_non_lazy_ibt_plt): Likewise.
	(elf_x32_non_lazy_ibt_plt): Likewise.
	(elf_x86_64_get_synthetic_symtab): Support the second PLT.
	(elf_x86_64_parse_gnu_properties): Support
	GNU_PROPERTY_X86_FEATURE_1_AND.
	(elf_x86_64_merge_gnu_properties): Support
	GNU_PROPERTY_X86_FEATURE_1_AND.  If info->ibt is set, turn
	on GNU_PROPERTY_X86_FEATURE_1_IBT
	(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
	turn on GNU_PROPERTY_X86_FEATURE_1_IBT.  Use IBT-enabled PLT
	for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
	is set on all relocatable inputs.

binutils/

	* readelf.c (decode_x86_feature): New.
	(print_gnu_property_note): Call decode_x86_feature on
	GNU_PROPERTY_X86_FEATURE_1_AND.
	* testsuite/binutils-all/i386/empty.d: New file.
	* testsuite/binutils-all/i386/empty.s: Likewise.
	* testsuite/binutils-all/i386/ibt.d: Likewise.
	* testsuite/binutils-all/i386/ibt.s: Likewise.
	* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/empty.d: Likewise.
	* testsuite/binutils-all/x86-64/empty.s: Likewise.
	* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
	* testsuite/binutils-all/x86-64/ibt.d: Likewise.
	* testsuite/binutils-all/x86-64/ibt.s: Likewise.

include/

	* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
	* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
	(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.

ld/

	* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
	* Makefile.in: Regenerated.
	* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
	and -z ibt.
	* emulparams/cet.sh: New file.
	* testsuite/ld-i386/ibt-plt-1.d: Likewise.
	* testsuite/ld-i386/ibt-plt-1.s: Likewise.
	* testsuite/ld-i386/ibt-plt-2.s: Likewise.
	* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
	* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
	* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
	* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
	* testsuite/ld-i386/ibt-plt-3.s: Likewise.
	* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
	* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
	* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
	* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
	* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
	* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
	* testsuite/ld-i386/property-x86-empty.s: Likewise.
	* testsuite/ld-i386/property-x86-ibt.s: Likewise.
	* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
	* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
	* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
	* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
	* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
	* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
	* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
	* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
	* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
	(TINY_READONLY_SECTION): Add .plt.sec.
	* emulparams/elf_i386.sh: Likewise.
	* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
	* ld.texinfo: Document -z ibtplt and -z ibt.
	* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
	* testsuite/ld-x86-64/x86-64.exp: Likewise.
	* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
 2017-06-22 05:44:53 -07:00
H.J. Lu
8e2f54bcee Add bfd_get_file_size to get archive element size 
We can't use stat() to get archive element size.  Add bfd_get_file_size
to get size for both normal files and archive elements.

bfd/

	PR binutils/21519
	* bfdio.c (bfd_get_file_size): New function.
	* bfd-in2.h: Regenerated.

binutils/

	PR binutils/21519
	* objdump.c (dump_relocs_in_section): Replace get_file_size
	with bfd_get_file_size to get archive element size.
	* testsuite/binutils-all/objdump.exp (test_objdump_f): New
	proc.
	(test_objdump_h): Likewise.
	(test_objdump_t): Likewise.
	(test_objdump_r): Likewise.
	(test_objdump_s): Likewise.
	Add objdump tests on archive.
 2017-05-30 06:34:40 -07:00
Maciej W. Rozycki
e5713223cb MIPS/BFD: For n64 hold the number of internal relocs in `->reloc_count' 
Revert parts of commit fee24f1c5b ("objdump improvements for mips
elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and
make the `->reloc_count' member of `struct bfd_section' hold the actual
number of internal relocations stored in its `->relocation' vector.  To
do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count'
to the actual number of internal relocations retrieved and discard
`mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc'
and their corresponding target macros.  Contrary to the description of
`mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes
generic relocation processing code happy and satisfies the "merge notes
section" binutils test case.

Add extra binutils test cases to expand the coverage of the generic
"merge notes section" test case, now passing with the n64 ABI, across
the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in
target configuration, and also to verify correctness of the relocations
produced.  Conversely, do not provide any additional test cases for the
original issue addressed with the commit referred:

- objdump would display only 1/3 of the total number of relocations,
  because it used the external relocation count, but each external
  relocation is brought in as 3 internal relocations.

as n64 ABI relocation processing with `objdump -r' and `objdump -R' is
already widely covered across the GAS and LD test suites.

	bfd/
	* elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype
	and function.
	(mips_elf64_canonicalize_dynamic_reloc): Likewise.
	(mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the
	actual number of internal relocations retrieved.  Adjust
	function description.
	(bfd_elf64_canonicalize_reloc): Remove macro.
	(bfd_elf64_canonicalize_dynamic_reloc): Likewise.

	binutils/
	* testsuite/binutils-all/mips/mips-note-2.d: New test.
	* testsuite/binutils-all/mips/mips-note-2r.d: New test.
	* testsuite/binutils-all/mips/mips-note-2-n32.d: New test.
	* testsuite/binutils-all/mips/mips-note-2-n64.d: New test.
	* testsuite/binutils-all/mips/mips-note-2r-n32.d: New test.
	* testsuite/binutils-all/mips/mips-note-2r-n64.d: New test.
	* testsuite/binutils-all/mips/mips.exp: Define `has_newabi'.
	Run the new tests.
 2017-05-20 00:31:39 +01:00
Maciej W. Rozycki
f0681695da binutils/testsuite: Permit the reuse of dump patterns 
Complement commit 89210bdc8f ("GAS: Permit the reuse of dump
patterns"), <https://sourceware.org/ml/binutils/2010-07/msg00269.html>,
and commit ef2b5578f6 ("MIPS: Enable NewABI tests for SDE targets"),
<https://sourceware.org/ml/binutils/2012-08/msg00017.html>, and like the
GAS and LD versions make the binutils version of `run_dump_test' also
support the `dump' keyword, for reusing dump patterns between tests.

	binutils/
	* testsuite/lib/utils-lib.exp (run_dump_test): Handle the `dump'
	option.
 2017-05-20 00:29:18 +01:00
Maciej W. Rozycki
dd47d677f0 MIPS/binutils/testsuite: Bail out right away if !ELF 
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS
ports are gone, making a future addition of any non-ELF tests unlikely.
Bail out right away then if non-ELF, consuming one level of indentation
across the actual tests run.

	binutils/
	* testsuite/binutils-all/mips/mips.exp: Bail out right away if
	non-ELF.
 2017-05-19 07:58:59 +01:00
Maciej W. Rozycki
3f3467ffc4 MIPS16e2: Add new MIPS16e2 ASE binutils and GAS tests 
Verify MIPS16e2 ASE instruction assembly, disassembly and object file
flags.

	binutils/
	* testsuite/binutils-all/mips/mips16-undecoded.d: Add `-mips3'
	to `as' flags.
	* testsuite/binutils-all/mips/mips16e2-undecoded.d: New test.
	* testsuite/binutils-all/mips/mips16e2-extend-insn.d: New test.
	* testsuite/binutils-all/mips/mips16-undecoded.s: Remove
	`.module mips3'.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.

	gas/
	* testsuite/gas/mips/mips16e2.d: New test.
	* testsuite/gas/mips/mips16e2-mt.d: New test.
	* testsuite/gas/mips/mips16e2-sub.d: New test.
	* testsuite/gas/mips/mips16e2@mips16e2-sub.d: New test.
	* testsuite/gas/mips/mips16e2-mt-sub.d: New test.
	* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: New test.
	* testsuite/gas/mips/mips16e2-hilo.d: New test.
	* testsuite/gas/mips/mips16e2-hilo-n32.d: New test.
	* testsuite/gas/mips/mips16e2-reloc-error.d: New test.
	* testsuite/gas/mips/mips16e2-imm-error.d: New test.
	* testsuite/gas/mips/elf_ase_mips16e2.d: New test.
	* testsuite/gas/mips/elf_ase_mips16e2-2.d: New test.
	* testsuite/gas/mips/elf-rel9-mips16e2.d: New test.
	* testsuite/gas/mips/mips16e2-lui.d: New test.
	* testsuite/gas/mips/mips16e2@mips32r2-sync.d: New test.
	* testsuite/gas/mips/mips16e2@mips32r2-sync-1.d: New test.
	* testsuite/gas/mips/mips16e2@lui-2.d: New test.
	* testsuite/gas/mips/mips16e2-reloc-error.l: New stderr output.
	* testsuite/gas/mips/mips16e2-imm-error.l: New stderr output.
	* testsuite/gas/mips/mips16e2@lui-2.l: New stderr output.
	* testsuite/gas/mips/mips16e2.s: New test source.
	* testsuite/gas/mips/mips16e2-mt.s: New test source.
	* testsuite/gas/mips/mips16e2-sub.s: New test source.
	* testsuite/gas/mips/mips16e2-mt-sub.s: New test source.
	* testsuite/gas/mips/mips16e2-hilo.s: New test source.
	* testsuite/gas/mips/mips16e2-reloc-error.s: New test source.
	* testsuite/gas/mips/mips16e2-imm-error.s: New test source.
	* testsuite/gas/mips/elf-rel9-mips16e2.s: New test source.
	* testsuite/gas/mips/mips16e2-lui.s: New test source.
	* testsuite/gas/mips/mips.exp: Expand `mips32r2-sync',
	`mips32r2-sync-1', `lui-1' and `lui-2' tests across MIPS16e2
	architectures.  Run the new tests.
 2017-05-15 13:57:11 +01:00
Maciej W. Rozycki
a4f8991513 MIPS16/opcodes: Make the handling of BREAK and SDBBP consistent 
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.

	opcodes/
	* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
	type to hexadecimal.
	(mips16_opcodes): Add operandless "break" and "sdbbp" entries.

	binutils/
	* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
	and SDBBP disassembly.

	gas/
	* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
	* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
	* testsuite/gas/mips/mips16-64.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
	* testsuite/gas/mips/mips16-macro.d: Likewise.
	* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
	* testsuite/gas/mips/mips16-sub.d: Likewise.
	* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
 2017-05-12 01:12:10 +01:00
Maciej W. Rozycki
40e5240e1f MIPS/binutils/testsuite: Define names of temporary files 
Define `tempfile' and `copyfile' in `mips.exp' so that standalone script
execution via `RUNTESTFLAGS=mips.exp' works rather than producing:

Running .../binutils/testsuite/binutils-all/mips/mips.exp ...
ERROR: tcl error sourcing
.../binutils/testsuite/binutils-all/mips/mips.exp.
ERROR: can't read "tempfile": no such variable
    while executing
"binutils_assemble_flags ${srcfile} $tempfile $opts(as)"
    (procedure "run_dump_test" line 207)
    invoked from within
"run_dump_test "mips-ase-1""
    invoked from within
"if [is_elf_format] {
    run_dump_test "mips-ase-1"
    run_dump_test "mips-ase-2"
    run_dump_test "mips-ase-3"
    run_dump_test "mixed-mips16"
   ..."
    (file ".../binutils/testsuite/binutils-all/mips/mips.exp" line 22)
    invoked from within
"source .../binutils/testsuite/binutils-all/mips/mips.exp"
    ("uplevel" body line 1)
    invoked from within
"uplevel #0 source .../binutils/testsuite/binutils-all/mips/mips.exp"
    invoked from within
"catch "uplevel #0 source $test_file_name""
testcase .../binutils/testsuite/binutils-all/mips/mips.exp completed in 0 seconds

	binutils/
	* testsuite/binutils-all/mips/mips.exp: Define `tempfile' and
	`copyfile' variables.
 2017-05-10 19:05:50 +01:00
Claudiu Zissulescu
53a346d823 [ARC] Object attributes. 
gas/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/gas/arc/attr-arc600.d: New file.
	* testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise.
	* testsuite/gas/arc/attr-arc600_norm.d: Likewise.
	* testsuite/gas/arc/attr-arc601.d: Likewise.
	* testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise.
	* testsuite/gas/arc/attr-arc601_mul64.d: Likewise.
	* testsuite/gas/arc/attr-arc601_norm.d: Likewise.
	* testsuite/gas/arc/attr-arc700.d: Likewise.
	* testsuite/gas/arc/attr-arcem.d: Likewise.
	* testsuite/gas/arc/attr-archs.d: Likewise.
	* testsuite/gas/arc/attr-autodetect-1.d: Likewise.
	* testsuite/gas/arc/attr-autodetect-1.s: Likewise.
	* testsuite/gas/arc/attr-cpu-a601.d: Likewise.
	* testsuite/gas/arc/attr-cpu-a601.s: Likewise.
	* testsuite/gas/arc/attr-cpu-a700.d: Likewise.
	* testsuite/gas/arc/attr-cpu-a700.s: Likewise.
	* testsuite/gas/arc/attr-cpu-em.d: Likewise.
	* testsuite/gas/arc/attr-cpu-em.s: Likewise.
	* testsuite/gas/arc/attr-cpu-hs.d: Likewise.
	* testsuite/gas/arc/attr-cpu-hs.s: Likewise.
	* testsuite/gas/arc/attr-em.d: Likewise.
	* testsuite/gas/arc/attr-em4.d: Likewise.
	* testsuite/gas/arc/attr-em4_dmips.d: Likewise.
	* testsuite/gas/arc/attr-em4_fpuda.d: Likewise.
	* testsuite/gas/arc/attr-em4_fpus.d: Likewise.
	* testsuite/gas/arc/attr-hs.d: Likewise.
	* testsuite/gas/arc/attr-hs34.d: Likewise.
	* testsuite/gas/arc/attr-hs38.d: Likewise.
	* testsuite/gas/arc/attr-hs38_linux.d: Likewise.
	* testsuite/gas/arc/attr-mul64.d: Likewise.
	* testsuite/gas/arc/attr-name.d: Likewise.
	* testsuite/gas/arc/attr-name.s: Likewise.
	* testsuite/gas/arc/attr-nps400.d: Likewise.
	* testsuite/gas/arc/attr-override-mcpu.d: Likewise.
	* testsuite/gas/arc/attr-override-mcpu.s
	* testsuite/gas/arc/attr-quarkse_em.d: Likewise.
	* testsuite/gas/arc/blank.s: Likewise.
	* testsuite/gas/elf/section2.e-arc: Likewise.
	* testsuite/gas/arc/cpu-pseudop-1.d: Update test.
	* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
	* testsuite/gas/arc/nps400-0.d: Likewise.
	* testsuite/gas/elf/elf.exp: Set target_machine for ARC.
	* config/tc-arc.c (opcode/arc-attrs.h): Include.
	(ARC_GET_FLAG, ARC_SET_FLAG, streq): Define.
	(arc_attribute): Declare new function.
	(md_pseudo_table): Add arc_attribute.
	(cpu_types): Rename default cpu features.
	(selected_cpu): Set the default OSABI flag.
	(mpy_option): New variable.
	(pic_option): Likewise.
	(sda_option): Likewise.
	(tls_option): Likewise.
	(feature_type, feature_list): Remove.
	(arc_initial_eflag): Likewise.
	(attributes_set_explicitly): New variable.
	(arc_check_feature): Check also for the conflicting features.
	(arc_select_cpu): Refactor assignment of selected_cpu.eflags.
	(arc_option): Remove setting of private flags and architecture.
	(check_cpu_feature): Refactor feature names.
	(autodetect_attributes): New function.
	(assemble_tokens): Use above function.
	(md_parse_option): Refactor feature names.
	(arc_attribute): New function.
	(arc_set_attribute_int): Likewise.
	(arc_set_attribute_string): Likewise.
	(arc_stralloc): Likewise.
	(arc_set_public_attributes): Likewise.
	(arc_md_end): Likewise.
	(arc_copy_symbol_attributes): Likewise.
	(rc_convert_symbolic_attribute): Likewise.
	* config/tc-arc.h (md_end): Define.
	(CONVERT_SYMBOLIC_ATTRIBUTE): Likewise.
	(TC_COPY_SYMBOL_ATTRIBUTES): Likewise.
	* doc/c-arc.texi: Document ARC object attributes.

binutils/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* readelf.c (decode_ARC_machine_flags): Recognize OSABI v4.
	(get_arc_section_type_name): New function.
	(get_section_type_name): Use the above function.
	(display_arc_attribute): New function.
	(process_arc_specific): Likewise.
	(process_arch_specific): Handle ARC specific information.
	* testsuite/binutils-all/strip-3.d: Consider ARC.attributes
	section.

include/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* elf/arc.h (SHT_ARC_ATTRIBUTES): Define.
	(Tag_ARC_*): Define.
	(E_ARC_OSABI_V4): Define.
	(E_ARC_OSABI_CURRENT): Reassign it.
	(TAG_CPU_*): Define.
	* opcode/arc-attrs.h: New file.
	* opcode/arc.h (insn_subclass_t): Assign enum values.
	(insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64.
	(ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT)
	(ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP)
	(ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW)
	(ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC)
	(ARC_CRC): Delete.

bfd/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* elf32-arc.c (FEATURE_LIST_NAME): Define.
	(CONFLICT_LIST): Likewise.
	(opcode/arc-attrs.h): Include.
	(arc_elf_print_private_bfd_data): Print OSABI v4 flag.
	(arc_extract_features): New file.
	(arc_stralloc): Likewise.
	(arc_elf_merge_attributes): Likewise.
	(arc_elf_merge_private_bfd_data): Use object attributes.
	(bfd_arc_get_mach_from_attributes): New function.
	(arc_elf_object_p): Use object attributes.
	(arc_elf_final_write_processing): Likewise.
	(elf32_arc_obj_attrs_arg_type): New function.
	(elf32_arc_obj_attrs_handle_unknown): Likewise.
	(elf32_arc_section_from_shdr): Likewise.
	(elf_backend_obj_attrs_vendor): Define.
	(elf_backend_obj_attrs_section): Likewise.
	(elf_backend_obj_attrs_arg_type): Likewise.
	(elf_backend_obj_attrs_section_type): Likewise.
	(elf_backend_obj_attrs_handle_unknown): Likewise.
	(elf_backend_section_from_shdr): Likewise.

ld/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/ld-arc/attr-merge-0.d: New file.
	* testsuite/ld-arc/attr-merge-0.s: Likewise.
	* testsuite/ld-arc/attr-merge-0e.s: Likewise.
	* testsuite/ld-arc/attr-merge-1.d: Likewise.
	* testsuite/ld-arc/attr-merge-1.s: Likewise.
	* testsuite/ld-arc/attr-merge-1e.s: Likewise.
	* testsuite/ld-arc/attr-merge-2.d: Likewise.
	* testsuite/ld-arc/attr-merge-2.s: Likewise.
	* testsuite/ld-arc/attr-merge-3.d: Likewise.
	* testsuite/ld-arc/attr-merge-3.s: Likewise.
	* testsuite/ld-arc/attr-merge-3e.s: Likewise.
	* testsuite/ld-arc/attr-merge-4.s: Likewise.
	* testsuite/ld-arc/attr-merge-5.d: Likewise.
	* testsuite/ld-arc/attr-merge-5a.s: Likewise.
	* testsuite/ld-arc/attr-merge-5b.s: Likewise.
	* testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise.
	* testsuite/ld-arc/attr-merge-err-isa.d: Likewise.
	* testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise.
	* testsuite/ld-arc/got-01.d: Update test.
	* testsuite/ld-arc/attr-merge-err-quarkse.d: New file.
	* testsuite/ld-arc/attr-quarkse.s: Likewise.
	* testsuite/ld-arc/attr-quarkse2.s: Likewise.

opcodes/
2017-05-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (parse_option): Update quarkse_em option..
	* arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to
	QUARKSE1.
	(dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2.
 2017-05-10 14:42:22 +02:00
Maciej W. Rozycki
a4ddc54ec1 MIPS16/opcodes: Keep the LSB of PC-relative offsets in disassembly 
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.

	opcodes/
	* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
	and branches and not synthetic data instructions.

	binutils/
	* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
	disassembly of PC-relative LA and LW synthetic instructions.
 2017-05-02 11:58:44 +01:00
Nick Clifton
3e6b644558 Improve decoding of corrupt/unrecognised gnu build attribute notes. 
* readelf.c (process_section_headers): Warn about overlarge
	sections.
	(print_gnu_build_attribute_name): Print the number of unrecognised
	note types.  Fix formatting in the presence of errors.
	(testsuite/binutils-all/note-2-32.s): Fix encoding of numeric notes.
	(testsuite/binutils-all/note-2-64.s): Likewise.
 2017-04-26 14:23:26 +01:00
Maciej W. Rozycki
6e3d1f0728 MIPS16/opcodes: Annotate instruction aliases 
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate
MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as
aliases.  These correspond to MOVE, and the PC-relative ADDIU, DADDIU,
LD and LW hardware instructions respectively.

	binutils/
	* testsuite/binutils-all/mips/mips16-alias.d: New test.
	* testsuite/binutils-all/mips/mips16-noalias.d: New test.
	* testsuite/binutils-all/mips/mips16-alias.s: New test source.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.

	opcodes/
	* mips16-opc.c (AL): New macro.
	(mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms
	of "ld" and "lw" as aliases.
 2017-04-25 11:55:34 +01:00
H.J. Lu
a91e1603af Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX 
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND.  Its sh_info field indicates the special memory
type.  GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker.  All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section.  In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value.  Each GNU_MBIND segment is
aligned at page boundary.

The assembler syntax:

    .section .mbind.foo,"adx",%progbits
                          ^             0: Special memory type.
                          |
                         'd' for SHF_GNU_MBIND.

    .section .mbind.foo,"adx",%progbits,0x1
                          ^             1: Special memory type.
                          |
                         'd' for SHF_GNU_MBIND.

    .section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
                          ^                               2: Special memory type.
                          |
                         'd' for SHF_GNU_MBIND.

bfd/

	* elf.c (get_program_header_size): Add a GNU_MBIND segment for
	each GNU_MBIND section and align GNU_MBIND section to page size.
	(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
	segment for each GNU_MBIND section.
	(_bfd_elf_init_private_section_data): Copy sh_info from input
	for GNU_MBIND section.

binutils/

	* NEWS: Mention support for ELF SHF_GNU_MBIND and
	PT_GNU_MBIND_XXX.
	* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
	(get_elf_section_flags): Handle SHF_GNU_MBIND.
	(process_section_headers): Likewise.
	* testsuite/binutils-all/mbind1.s: New file.
	* testsuite/binutils-all/objcopy.exp: Run readelf test on
	mbind1.s.

gas/

	* NEWS: Mention support for ELF SHF_GNU_MBIND.
	* config/obj-elf.c (section_match): New.
	(get_section): Match both sh_info and group name.
	(obj_elf_change_section): Add argument for sh_info.  Pass both
	sh_info and group name to get_section. Issue an error for
	SHF_GNU_MBIND section without SHF_ALLOC.  Set sh_info.
	(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
	(obj_elf_section): Support SHF_GNU_MBIND section info.
	* config/obj-elf.h (obj_elf_change_section): Add argument for
	sh_info.
	* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
	obj_elf_change_section.
	* config/tc-ia64.c (obj_elf_vms_common): Likewise.
	* config/tc-microblaze.c (microblaze_s_data): Likewise.
	(microblaze_s_sdata): Likewise.
	(microblaze_s_rdata): Likewise.
	(microblaze_s_bss): Likewise.
	* config/tc-mips.c (s_change_section): Likewise.
	* config/tc-msp430.c (msp430_profiler): Likewise.
	* config/tc-rx.c (parse_rx_section): Likewise.
	* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
	* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
	* testsuite/gas/elf/elf.exp: Run section12a, section12b and
	section13.
	* testsuite/gas/elf/section10.d: Updated.
	* testsuite/gas/elf/section10.s: Likewise.
	* testsuite/gas/elf/section12.s: New file.
	* testsuite/gas/elf/section12a.d: Likewise.
	* testsuite/gas/elf/section12b.d: Likewise.
	* testsuite/gas/elf/section13.l: Likewise.
	* testsuite/gas/elf/section13.d: Likewise.
	* testsuite/gas/elf/section13.s: Likewise.

include/

	* elf/common.h (PT_GNU_MBIND_NUM): New.
	(PT_GNU_MBIND_LO): Likewise.
	(PT_GNU_MBIND_HI): Likewise.
	(SHF_GNU_MBIND): Likewise.

ld/

	* NEWS: Mention support for ELF SHF_GNU_MBIND and
	PT_GNU_MBIND_XXX.
	* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
	input GNU_MBIND sections with the same type, attributes and
	sh_info field into a single output GNU_MBIND section.
	* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
	* testsuite/ld-elf/mbind1.s: New file.
	* testsuite/ld-elf/mbind1a.d: Likewise.
	* testsuite/ld-elf/mbind1b.d: Likewise.
	* testsuite/ld-elf/mbind1c.d: Likewise.
	* testsuite/ld-elf/mbind2a.s: Likewise.
	* testsuite/ld-elf/mbind2b.c: Likewise.
 2017-04-04 09:06:04 -07:00
Pip Cet
efdf7a02db Fix minor problems with previous wasm32 binutils commit. 
binutils * NEWS: Use "WebAssembly" consistently.
	* testsuite/binutils-all/wasm32/wasm32.exp: Fix copyright notice.
 2017-03-31 13:07:01 +01:00
Pip Cet
f96bd6c2d7 Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils. 
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files.
	(guess_is_rela): Likewise.
	(dump_relocations): Likewise.
	(is_32bit_abs_reloc): Likewise.
	(is_none_reloc_): Likewise.
	* NEWS: Mention the new support.
	* testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32
	as ELF target.
	(supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE.
	* testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations.
	* testsuite/binutils-all/wasm32: New directory.
	* testsuite/binutils-all/wasm32/create-wasm.d: New file.
	* testsuite/binutils-all/wasm32/create-wasm.s: Likewise.
	* testsuite/binutils-all/wasm32/custom-section.d: Likewise.
	* testsuite/binutils-all/wasm32/custom-section.s: Likewise.
	* testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise.
	* testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise.
	* testsuite/binutils-all/wasm32/long-sections.d: Likewise.
	* testsuite/binutils-all/wasm32/long-sections.s: Likewise.
	* testsuite/binutils-all/wasm32/parse-wasm.d: Likewise.
	* testsuite/binutils-all/wasm32/parse-wasm.s: Likewise.
	* testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise.
	* testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise.
	* testsuite/binutils-all/wasm32/prepared-section.d: Likewise.
	* testsuite/binutils-all/wasm32/prepared-section.s: Likewise.
	* testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests.

gas	* config/tc-wasm32.h: New file: Add WebAssembly assembler target.
	* config/tc-wasm32.c: New file: Add WebAssembly assembler target.
	* Makefile.am: Add WebAssembly assembler target.
	* configure.tgt: Add WebAssembly assembler target.
	* doc/c-wasm32.texi: New file: Start documenting WebAssembly
	assembler.
	* doc/all.texi: Define WASM32.
	* doc/as.texinfo: Add WebAssembly entries.
	* NEWS: Mention the new support.
	* Makefile.in: Regenerate.
	* po/gas.pot: Regenerate.
	* po/POTFILES.in: Regenerate.
	* testsuite/gas/wasm32: New directory.
	* testsuite/gas/wasm32/allinsn.d: New file.
	* testsuite/gas/wasm32/allinsn.s: New file.
	* testsuite/gas/wasm32/illegal.l: New file.
	* testsuite/gas/wasm32/illegal.s: New file.
	* testsuite/gas/wasm32/illegal-2.l: New file.
	* testsuite/gas/wasm32/illegal-2.s: New file.
	* testsuite/gas/wasm32/illegal-3.l: New file.
	* testsuite/gas/wasm32/illegal-3.s: New file.
	* testsuite/gas/wasm32/illegal-4.l: New file.
	* testsuite/gas/wasm32/illegal-4.s: New file.
	* testsuite/gas/wasm32/illegal-5.l: New file.
	* testsuite/gas/wasm32/illegal-5.s: New file.
	* testsuite/gas/wasm32/illegal-6.l: New file.
	* testsuite/gas/wasm32/illegal-6.s: New file.
	* testsuite/gas/wasm32/illegal-7.l: New file.
	* testsuite/gas/wasm32/illegal-7.s: New file.
	* testsuite/gas/wasm32/illegal-8.l: New file.
	* testsuite/gas/wasm32/illegal-8.s: New file.
	* testsuite/gas/wasm32/illegal-9.l: New file.
	* testsuite/gas/wasm32/illegal-9.s: New file.
	* testsuite/gas/wasm32/illegal-10.l: New file.
	* testsuite/gas/wasm32/illegal-10.s: New file.
	* testsuite/gas/wasm32/illegal-11.l: New file.
	* testsuite/gas/wasm32/illegal-11.s: New file.
	* testsuite/gas/wasm32/illegal-12.l: New file.
	* testsuite/gas/wasm32/illegal-12.s: New file.
	* testsuite/gas/wasm32/illegal-13.l: New file.
	* testsuite/gas/wasm32/illegal-13.s: New file.
	* testsuite/gas/wasm32/illegal-14.l: New file.
	* testsuite/gas/wasm32/illegal-14.s: New file.
	* testsuite/gas/wasm32/illegal-15.l: New file.
	* testsuite/gas/wasm32/illegal-15.s: New file.
	* testsuite/gas/wasm32/illegal-16.l: New file.
	* testsuite/gas/wasm32/illegal-16.s: New file.
	* testsuite/gas/wasm32/illegal-17.l: New file.
	* testsuite/gas/wasm32/illegal-17.s: New file.
	* testsuite/gas/wasm32/illegal-18.l: New file.
	* testsuite/gas/wasm32/illegal-18.s: New file.
	* testsuite/gas/wasm32/illegal-19.l: New file.
	* testsuite/gas/wasm32/illegal-19.s: New file.
	* testsuite/gas/wasm32/illegal-20.l: New file.
	* testsuite/gas/wasm32/illegal-20.s: New file.
	* testsuite/gas/wasm32/illegal-21.l: New file.
	* testsuite/gas/wasm32/illegal-21.s: New file.
	* testsuite/gas/wasm32/illegal-22.l: New file.
	* testsuite/gas/wasm32/illegal-22.s: New file.
	* testsuite/gas/wasm32/illegal-24.l: New file.
	* testsuite/gas/wasm32/illegal-24.s: New file.
	* testsuite/gas/wasm32/illegal-25.l: New file.
	* testsuite/gas/wasm32/illegal-25.s: New file.
	* testsuite/gas/wasm32/reloc.d: New file.
	* testsuite/gas/wasm32/reloc.s: New file.
	* testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly
	architecture.

opcodes * configure.ac: Add (empty) bfd_wasm32_arch target.
	* configure: Regenerate
	* po/opcodes.pot: Regenerate.

include	* opcode/wasm.h: New file to support wasm32 architecture.
	* elf/wasm32.h: Add R_WASM32_32 relocation.

bfd	* elf32-wasm32.c: Add relocation code, two relocs.
	* reloc.c: Add wasm32 relocations.
	* libbfd.h: Regenerate.
	* bfd-in2.h: Regenerate.
	* bfd/po/bfd.pot: Regenerate.
 2017-03-30 10:57:21 +01:00
Nick Clifton
c799a79d66 Try harder to find the correct symbol to associate with OPEN GNU BUILD notes. 
* readelf.c (print_gnu_build_attribute_description): Move symbol
	printing code to...
	(print_symbol_for_build_attribute): New function.  ...here.
	Add to find the best symbol to associate with an OPEN note.
	Add code to cache the symbol table and string table, so that they
	are not loaded every time a note is displayed.
	* testsuite/binutils-all/note-2-32.s: Add a function symbol.
	* testsuite/binutils-all/note-2-64.s: Likewise.
	* testsuite/binutils-all/note-2-32.d: Update expected note output.
	* testsuite/binutils-all/note-2-64.d: Likewise.
 2017-03-14 12:57:09 +00:00
H.J. Lu
1fc87489b4 Properly dump NT_GNU_PROPERTY_TYPE_0 
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects.  Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects.  We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.

binutils/

	PR binutils/21231
	* readelf.c (decode_x86_isa): Change argument to unsigned int.
	(print_gnu_property_note): Retrieve property type and datasz as
	4-byte integer.  Consolidate property datasz check.  Check
	GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
	* testsuite/binutils-all/i386/pr21231a.d: New file.
	* testsuite/binutils-all/i386/pr21231a.s: Likewise.
	* testsuite/binutils-all/i386/pr21231b.d: Likewise.
	* testsuite/binutils-all/i386/pr21231b.s: Likewise.
	* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
	* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
	* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
	* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.

include/

	PR binutils/21231
	* elf/common.h (GNU_PROPERTY_LOPROC): New.
	(GNU_PROPERTY_HIPROC): Likewise.
	(GNU_PROPERTY_LOUSER): Likewise.
	(GNU_PROPERTY_HIUSER): Likewise.
 2017-03-08 07:44:17 -08:00
Nick Clifton
9ef920e933 Add support for displaying and merging GNU_BUILD_NOTEs. 
include	* elf/common.h (SHF_GNU_BUILD_NOTE): Define.
	(NT_GNU_PROPERTY_TYPE_0): Define.
	(NT_GNU_BUILD_ATTRIBUTE_OPEN): Define.
	(NT_GNU_BUILD_ATTRIBUTE_FUN): Define.
	(GNU_BUILD_ATTRIBUTE_TYPE_NUMERIC): Define.
	(GNU_BUILD_ATTRIBUTE_TYPE_STRING): Define.
	(GNU_BUILD_ATTRIBUTE_TYPE_BOOL_TRUE): Define.
	(GNU_BUILD_ATTRIBUTE_TYPE_BOOL_FALSE): Define.
	(GNU_BUILD_ATTRIBUTE_VERSION): Define.
	(GNU_BUILD_ATTRIBUTE_STACK_PROT): Define.
	(GNU_BUILD_ATTRIBUTE_RELRO): Define.
	(GNU_BUILD_ATTRIBUTE_STACK_SIZE): Define.
	(GNU_BUILD_ATTRIBUTE_TOOL): Define.
	(GNU_BUILD_ATTRIBUTE_ABI): Define.
	(GNU_BUILD_ATTRIBUTE_PIC): Define.
	(NOTE_GNU_PROPERTY_SECTION_NAME): Define.
	(GNU_BUILD_ATTRS_SECTION_NAME): Define.
	(GNU_PROPERTY_STACK_SIZE): Define.
	(GNU_PROPERTY_NO_COPY_ON_PROTECTED): Define.
	(GNU_PROPERTY_X86_ISA_1_USED): Define.
	(GNU_PROPERTY_X86_ISA_1_NEEDED): Define.
	(GNU_PROPERTY_X86_ISA_1_486): Define.
	(GNU_PROPERTY_X86_ISA_1_586): Define.
	(GNU_PROPERTY_X86_ISA_1_686): Define.
	(GNU_PROPERTY_X86_ISA_1_SSE): Define.
	(GNU_PROPERTY_X86_ISA_1_SSE2): Define.
	(GNU_PROPERTY_X86_ISA_1_SSE3): Define.
	(GNU_PROPERTY_X86_ISA_1_SSSE3): Define.
	(GNU_PROPERTY_X86_ISA_1_SSE4_1): Define.
	(GNU_PROPERTY_X86_ISA_1_SSE4_2): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX2): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512F): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512CD): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512ER): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512PF): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512VL): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512DQ): Define.
	(GNU_PROPERTY_X86_ISA_1_AVX512BW): Define.

binutils* readelf.c (get_note_type): Add support for GNU_BUILD_NOTEs.
	(get_gnu_elf_note_type): Add support for GNU_PROPERTY_NOTEs.
	(decode_x86_isa): New function.
	(print_gnu_property_note): New function.
	(print_gnu_note): Handle GNU_PROPERTY_NOTEs.
	(print_gnu_build_attribute_description): New function.
	(print_gnu_build_attribute_name): New function.
	(process_note): Add support for GNU_BUILD_NOTEs.
	* objcopy.c (--merge-notes): New command line option.
	(copy_options): Add merge-notes.
	(copy_usage): Likewise.
	(is_merge_note_section): New function.
	(merge_gnu_build_notes): New function.
	(copy_object): Merge note sections if asked to do so.
	(skip_section): Add skip_copy parameter.  Add support for skipping
	merged note sections.
	(copy_relocations_in_section): Update call to skip_section.
	(copy_section): Likewise.
	(copy_main): Add support for merge-notes option.
	* doc/binutils.texi: Document the new option to objcopy.
	* NEWS: Mention the new feature.
	* testsuite/binutils-all/note-2-32.d: New test.  Checks note
	merging on 32-bit targets.
	* testsuite/binutils-all/note-2-32.s: New test source file.
	* testsuite/binutils-all/note-2-64.d: New test.  Like note-2-32.d
	but for 64-bit targets.
	* testsuite/binutils-all/note-2-64.s: New test source file.
	* testsuite/binutils-all/objcopy.exp: Run the new test.
 2017-03-01 11:09:46 +00:00
Alan Modra
3b83ea38cf Fixes for new dw5 test 
On some targets, .string does not add a NUL string terminator.

	* testsuite/binutils-all/dw5.S: Replace .string with .asciz.
	Support hpux .comm variant.
	* testsuite/binutils-all/readelf.exp: Define HPUX when assembling
	dw5 test for hppa64-hpux.
 2017-02-25 19:13:23 +10:30
Jan Kratochvil
a567769b81 DWARF-5: testcase 
binutils/
2017-02-23  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* testsuite/binutils-all/dw5.S: New file.
	* testsuite/binutils-all/dw5.W: New file.
	* testsuite/binutils-all/readelf.exp (readelf -wiaoRlL): New test.
 2017-02-23 22:58:45 +01:00
Dmitry Timoshkov
6bb21700ab Stop the (optional) dialong control data from being aligned when parsing/writing windows resource files. 
binutils* resbin.c: Optional dialog control data immediately follow
	the control description without alignment.
	* testsuite/binutils-all/windres/controldata.rc: New test.
	source.
	* testsuite/binutils-all/windres/controldata.rsd: New test.
 2017-01-18 11:40:06 +00:00
Nick Clifton
2425a30e40 Add support for locating separate debug info files via the build-id method. 
PR binutils/20876
bfd	* opncls.c (find_separate_debug_file): Add include_dirs
	parameter.  Only include the directory part of the bfd's filename
	in search paths if include_dirs is true.  Add a couple of extra
	locations for looking for debug files.
	( bfd_follow_gnu_debuglink): Update invocation of
	find_separate_debug_file.
	(bfd_follow_gnu_debugaltlink): Likewise.
	(get_build_id): New function: Finds the build-id of the given bfd.
	(get_build_id_name): New function: Computes the name of the
	separate debug info file for a bfd, based upon its build-id.
	(check_build_id_file): New function: Checks to see if a separate
	debug info file exists at the given location, and that its
	build-id matches that of the original bfd.
	(bfd_follow_build_id_debuglink): New function: Finds a separate
	debug info file for a given bfd by using the build-id method.
	* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
	method of locating a separate debug info file before using the
	debuglink method.
	* bfd-in2.h: Regenerate.

binutils * NEWS: Mention the new feature.
	* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
	New proc to test the location of separate debug info files using
	the build-id method.
 2017-01-12 16:56:54 +00:00
Alan Modra
2571583aed Update year range in copyright notice of all files. 2017-01-02 14:08:56 +10:30
Maciej W. Rozycki
5284e471d5 MIPS16: Add ASMACRO instruction support 
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.

[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS32 Architecture", MIPS
    Technologies, Inc., Document Number: MD00076, Revision 2.63, July
    16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65

[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS64 Architecture", MIPS
    Technologies, Inc., Document Number: MD00077, Revision 2.60, June
    25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66

	include/
	* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
	operand codes.

	opcodes/
	* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
	`4' and `s' operand codes.
	(mips16_opcodes): Add "asmacro" entry.

	binutils/
	* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
	ASMACRO support.

	gas/
	* testsuite/gas/mips/mips16-asmacro.d: New test.
	* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
	* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
	* testsuite/gas/mips/mips16-asmacro.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.
 2016-12-23 19:55:21 +00:00
Maciej W. Rozycki
0674ee5dad MIPS16: Handle non-extensible instructions correctly 
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.

According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].

Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.

References:

[1] "Product Description, MIPS16 Application-Specific Extension",
    Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
    Instruction Set Summary", p. 5

[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10

[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS32 Architecture", MIPS
    Technologies, Inc., Document Number: MD00076, Revision 2.63, July
    16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39

[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49

[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
    Application-Specific Extension to the MIPS64 Architecture", MIPS
    Technologies, Inc., Document Number: MD00077, Revision 2.60, June
    25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41

[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51

	include/
	* opcode/mips.h (INSN2_SHORT_ONLY): New macro.

	gas/
	* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
	instruction size override for INSN2_SHORT_ONLY opcode table
	entries.
	* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
	* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
	* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
	messages.
	* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
	messages.
	* testsuite/gas/mips/mips16-insn-e.d: New test.
	* testsuite/gas/mips/mips16-insn-t.d: New test.
	* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
	* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
	* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
	* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
	* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
	* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
	* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
	* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
	* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
	output.
	* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
	output.
	* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
	output.
	* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
	output.
	* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
	output.
	* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
	output.
	* testsuite/gas/mips/mips16-insn-e.s: New test source.
	* testsuite/gas/mips/mips16-insn-t.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

	opcodes/
	* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
	matching for INSN2_SHORT_ONLY opcode table entries.
	* mips16-opc.c (SH): New macro.
	(mips16_opcodes): Set SH in `pinfo2' for non-extensible
	instruction entries: "nop", "addu", "and", "break", "cmp",
	"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
	"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
	"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
	"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
	"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
	"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
	"seh", "sew", "zeb", "zeh", "zew" and "extend".

	binutils/
	* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
	* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
	source.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.
 2016-12-23 19:33:45 +00:00
Maciej W. Rozycki
11dd08e9a0 MIPS16/opcodes: Respect ISA and ASE in disassembly 
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.

To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate.  Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.

	opcodes/
	* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
	ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
	(print_insn_mips16): Check opcode entries for validity against
	the ISA level and ASE set selected.

	binutils/
	* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
	rather than `.set' to set the ISA level.

	gas/
	* testsuite/gas/mips/mips16-sub.d: New test.
	* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
	* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
	* testsuite/gas/mips/mips16e-sub.d: New test.
	* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
	* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
	* testsuite/gas/mips/mips16e-64-sub.d: New test.
	* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
	* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
	* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
	* testsuite/gas/mips/mips16-sub.s: New test source.
	* testsuite/gas/mips/mips16e-sub.s: New test source.
	* testsuite/gas/mips/mips16e-64-sub.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.
 2016-12-20 12:05:48 +00:00
Maciej W. Rozycki
7fd5392005 MIPS16: Switch to 32-bit opcode table interpretation 
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.

In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.

In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.

	include/
	* opcode/mips.h (mips_opcode_32bit_p): New inline function.

	gas/
	* config/tc-mips.c (micromips_insn_length): Use
	`mips_opcode_32bit_p'.
	(is_size_valid): Adjust description.
	(is_size_valid_16): New function.
	(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
	operand decoding.
	(validate_mips16_insn): Remove `a' and `i' operand code special
	casing, use `mips_opcode_32bit_p' to determine instruction
	width.
	(append_insn): Adjust forced MIPS16 instruction size
	determination.
	(match_mips16_insn): Likewise.  Don't shift the instruction's
	opcode with the `a' and `i' operand codes.  Use
	`mips_opcode_32bit_p' in operand decoding.
	(match_mips16_insns): Check for forced instruction size's
	validity.
	(mips16_ip): Don't force instruction size in the `noautoextend'
	mode.
	* testsuite/gas/mips/mips16-jal-e.d: New test.
	* testsuite/gas/mips/mips16-jal-t.d: New test.
	* testsuite/gas/mips/mips16-macro-e.d: New test.
	* testsuite/gas/mips/mips16-macro-t.d: New test.
	* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
	* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
	* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
	* testsuite/gas/mips/mips16-jal-e.s: New test source.
	* testsuite/gas/mips/mips16-jal-t.s: New test source.
	* testsuite/gas/mips/mips16-macro-e.s: New test source.
	* testsuite/gas/mips/mips16-macro-t.s: New test source.
	* testsuite/gas/mips/mips.exp: Run the new tests.

	opcodes/
	* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
	`insn' together, with `extend' as the high-order 16 bits.
	(match_kind): New enum.
	(print_insn_mips16): Rework for 32-bit instruction matching.
	Do not dump EXTEND prefixes here.
	* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
	Recode `match' and `mask' fields as 32-bit in absolute "jal" and
	"jalx" entries.

	binutils/
	* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
	test for separate EXTEND prefix disassembly.
 2016-12-20 11:56:32 +00:00
Maciej W. Rozycki
5e7fc731f8 MIPS/opcodes: Also set disassembler's ASE flags from ELF structures 
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time.  Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.

	include/
	* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
	typedef as `elf_internal_abiflags_v0'.

	bfd/
	* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
	(bfd_mips_elf_get_abiflags): New prototype.
	* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
	* bfd-in2.h: Regenerate.

	opcodes/
	* mips-dis.c (mips_convert_abiflags_ases): New function.
	(set_default_mips_dis_options): Also infer ASE flags from ELF
	file structures.

	binutils/
	* testsuite/binutils-all/mips/mips-ase-1.d: New test.
	* testsuite/binutils-all/mips/mips-ase-2.d: New test.
	* testsuite/binutils-all/mips/mips-ase-3.d: New test.
	* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
	* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
	* testsuite/binutils-all/mips/mips.exp: Run the new tests.
 2016-12-14 22:12:21 +00:00
Maciej W. Rozycki
55af478400 MIPS16/opcodes: Reformat raw EXTEND and undecoded output 
Use a tab rather than a space to separate `extend' and its uninterpreted
argument output, like with regular instructions.  Separate hexadecimal
halves of undecoded extended instructions output with a space instead of
presenting them concatenated.

	opcodes/
	* mips-dis.c (print_insn_mips16): Use a tab rather than a space
	to separate `extend' and its uninterpreted argument output.
	Separate hexadecimal halves of undecoded extended instructions
	output.

	binutils/
	* testsuite/binutils-all/mips/mips16-extend-noinsn.d: New test.
	* testsuite/binutils-all/mips/mips16-extend-noinsn.s: New test
	source.
	* testsuite/binutils-all/mips/mips.exp: Run the new test.
 2016-12-09 23:18:06 +00:00
Maciej W. Rozycki
860b03a8f3 MIPS16/opcodes: Fix PC-relative operation delay-slot adjustment 
Complement commit dd8b7c222e ("MIPS: mips16e jalrc/jrc opcodes"),
<https://sourceware.org/ml/binutils/2005-07/msg00349.html>, and stop the
disassembler making a delay-slot adjustment for PC-relative operations
following either MIPS16e compact jumps, or undefined RR/J(AL)R(C)
encodings that have the `l' (link) and `ra' (source register is `ra')
bits set both at a time.  Adjust code description for accuracy.  Add a
suitable test case.

	opcodes/
	* mips-dis.c (print_mips16_insn_arg): Avoid delay-slot
	adjustment for PC-relative operations following MIPS16e compact
	jumps or undefined RR/J(AL)R(C) encodings.

	binutils/
	* testsuite/binutils-all/mips/mips16-pcrel.d: New test.
	* testsuite/binutils-all/mips/mips16-pcrel.s: New test source.
	* testsuite/binutils-all/mips/mips.exp: Run the new test.
 2016-12-08 23:30:57 +00:00
Claudiu Zissulescu
ee881e5d33 [ARC] Fix disassembler option. 
This patch fixes:
- fpus and fpud are swaped.
- quarkse_em doesn't include FPX extensions.
- auto guessed opcode mechanism may ignore the option passed via -M<feature> option.

opcodes/
2016-11-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (is_compatible_p): Remove function.
	(skip_this_opcode): Don't add any decoding class to decode list.
	Remove warning.
	(find_format_from_table): Go through all opcodes, and warn if we
	use a guessed mnemonic.

binutils/
2016-11-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* testsuite/binutils-all/arc/objdump.exp (Warning test): Update
	test.
 2016-11-29 11:23:24 +01:00