* solib-som.c (som_solib_section_offsets): Use BFD section
indices. Set offsets for all sections.
* somread.c (som_symtab_read): Compute BFD section for
symbol. Use prim_record_minimal_symbol_and_info.
(som_symfile_read): Fix comment.
(struct find_section_offset_arg): New.
(find_section_offset, set_section_index): New functions.
(som_symfile_offsets): Use set_section_index to compute
section indices.
bfd/
* som.c (bfd_section_from_som_symbol): No longer static.
* som.h (bfd_section_from_som_symbol): Declare.
If !PARSE_CONDITION_AND_THREAD, then ARG is just the location, nothing
else. The fact that the describing comment of create_breakpoint
doesn't mention this just looks like an oversight of when extra_string
was added. "parse_condition_and_thread" has been a misnomer ever
since extra_string was added -- better rename it avoid more confusion.
This makes it "parse_arg", as that'll remain stable even if/when more
explicit parameters are added.
gdb/
2013-04-08 Pedro Alves <palves@redhat.com>
Keith Seitz <keiths@redhat.com>
* breakpoint.c (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg". Update
describing comment. If !PARSE_ARG, then error out if ARG is not
the empty string after extracting the location.
* breakpoint.h (create_breakpoint): Rename
"parse_condition_and_thread" parameter to "parse_arg".
gdb/testsuite/
2013-04-08 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-break.exp (test_error): Add tests with garbage after
the location.
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
Fix compatibility with Linux kernel 3.8.3.
* linux-tdep.c (linux_find_memory_regions_full): Move variable number
to more inner block. Remove parsing of NUMBER from outer block.
Parse NUMBER only if KEYWORD has been identified.
If a tracepoint's actions list includes a while-stepping action, and
then the actions are changed to a list without any while-stepping
action, the tracepoint's step_count will be left with a stale value.
For example:
(gdb) trace subr
Tracepoint 1 at 0x4004d9: file ../../../src/gdb/testsuite//actions-changed.c, line 31.
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>end
(gdb) set debug remote 1
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:0:0-#a3...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $reg
>while-stepping 1
>collect $reg
>end
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF-#58...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:SR03FFFFFFFFFFFFFFFFFF#7e...Packet received: OK
(gdb) tstop
Sending packet: $QTStop#4b...Packet received: OK
Sending packet: $QTNotes:#e8...Packet received: OK
(gdb) actions
Enter actions for tracepoint 1, one per line.
End with a line saying just "end".
>collect $regs
>end
(gdb) tstart
Sending packet: $QTinit#59...Packet received: OK
Sending packet: $QTDP:1:00000000004004d9:E:1:0-#a4...Packet received: OK
Sending packet: $QTDP👎00000000004004d9:R03FFFFFFFFFFFFFFFFFF#2b...Packet received: OK
The last "$QTDP:1:00000000004004d9:E:1:0-#a4" should be "$QTDP:1:00000000004004d9:E:0:0-#a3".
In pseudo-diff:
-$QTDP:1:00000000004004d9:E:1:0-#a4
+$QTDP:1:00000000004004d9:E:0:0-#a3
A related issue is that the "commands" command actually supports
setting commands to a range of breakpoints/tracepoints at once. But,
hacking "maint info breakpoints" to print t->step_count, reveals:
(gdb) trace main
Tracepoint 5 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) trace main
Note: breakpoint 5 also set at pc 0x45a2ab.
Tracepoint 6 at 0x45a2ab: file ../../src/gdb/gdb.c, line 29.
(gdb) commands 5-6
Type commands for breakpoint(s) 5-6, one per line.
End with a line saying just "end".
> while-stepping 5
>end
> end
(gdb) maint info breakpoints 5
Num Type Disp Enb Address What
5 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=5
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb) maint info breakpoints 6
Num Type Disp Enb Address What
6 tracepoint keep y 0x000000000045a2ab in main at ../../src/gdb/gdb.c:29 inf 1
step_count=0
^^^^^^^^^^^^
while-stepping 5
end
not installed on target
(gdb)
that tracepoint 6 doesn't end up with the correct step_count.
The issue is that here:
static void
do_map_commands_command (struct breakpoint *b, void *data)
{
struct commands_info *info = data;
if (info->cmd == NULL)
{
struct command_line *l;
if (info->control != NULL)
l = copy_command_lines (info->control->body_list[0]);
else
{
struct cleanup *old_chain;
char *str;
str = xstrprintf (_("Type commands for breakpoint(s) "
"%s, one per line."),
info->arg);
old_chain = make_cleanup (xfree, str);
l = read_command_lines (str,
info->from_tty, 1,
(is_tracepoint (b)
? check_tracepoint_command : 0),
b);
do_cleanups (old_chain);
}
info->cmd = alloc_counted_command_line (l);
}
validate_actionline is never called for tracepoints other than the
first (the copy_command_lines path). Right below, we have:
/* If a breakpoint was on the list more than once, we don't need to
do anything. */
if (b->commands != info->cmd)
{
validate_commands_for_breakpoint (b, info->cmd->commands);
incref_counted_command_line (info->cmd);
decref_counted_command_line (&b->commands);
b->commands = info->cmd;
observer_notify_breakpoint_modified (b);
}
And validate_commands_for_breakpoint looks like the right place to put
a call; if we reset step_count there too, we have a nice central fix
for the first issue as well, because trace_actions_command calls
breakpoint_set_commands that also calls
validate_commands_for_breakpoint.
We end up calling validate_actionline twice for the first tracepoint,
since read_command_lines calls it too, through
check_tracepoint_command, but that should be harmless.
2013-04-04 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
* breakpoint.c (validate_commands_for_breakpoint): If validating a
tracepoint, reset its STEP_COUNT and call validate_actionline.
2013-04-04 Stan Shebs <stan@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.trace/Makefile.in (PROGS): Add actions-changed.
* gdb.trace/actions-changed.c: New file.
* gdb.trace/actions-changed.exp: New file.
* lib/trace-support.exp (gdb_trace_setactions): Rename to ...
(gdb_trace_setactions_command): ... this. Add "actions_command"
parameter, and handle it.
(gdb_trace_setactions, gdb_trace_setcommands): New procedures.
read_die_and_siblings.
(read_die_and_siblings): New function.
(read_cutu_die_from_dwo): Dump die if requested.
(read_die_and_children): Call read_full_die_1 and
read_die_and_siblings_1.
(read_full_die): Dump die if requested.
* dwarf2read.c (read_comp_units_from_section): Add debugging printf.
Rename member name to dwo_name. All uses updated.
(hash_dwo_file): Include comp_dir in computation.
(eq_dwo_file): Ditto.
(lookup_dwo_file_slot): New arg comp_dir. All callers updated.
(create_dwo_in_dwp, lookup_dwo_in_dwp, open_and_init_dwo_file): Ditto.
x86_64/Cygwin is only mentioned as a new target, but we gained support
for building a native x86_64/Cygwin debugger too.
gdb/
2013-04-03 Pedro Alves <palves@redhat.com>
* NEWS: Mention x86_64/Cygwin as new native configuration.
I hacked "apropos" to dump the whole set of commands (just make it
accept the entry string as regex), and then diffed the output of 7.5
vs 7.6, --enable-targets=all builds. That allowed then checking
whether some commands had not been mentioned in NEWS or the manual.
These are what I found missing. We've been a bit negligent in
requiring documentation bits for debug commands.
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
* NEWS: Mention "set/show debug aarch64", "set/show debug
coff-pe-read" and "set/show debug mach-o".
gdb/doc/
2013-04-02 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Debugging Output): Document "set/show debug
aarch64", "set/show debug coff-pe-read" and "set/show debug
mach-o".
The "New commands" section reads:
"New commands (for set/show, see "New options" below)"
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
* NEWS: Move "set debug notification" and "set trace-buffer-size"
under "New options".
PR gdb/15275 notes that when debugging with a remote connection over a
serial link and the link is disconnected, say by disconnecting USB
serial port, the GDB quit command no longer works:
(gdb)
tar ext /dev/ttyACM0
&"tar ext /dev/ttyACM0\n"
~"Remote debugging using /dev/ttyACM0\n"
^done
(gdb)
set debug remote 1
&"set debug remote 1\n"
^done
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
(gdb)
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
This is not reproducible with TCP connections, as with that, sending
doesn't error out, but instead the error is detected on the subsequent
readchar. When that read fails, we unpush the remote target, and
throw TARGET_CLOSE_ERROR. To address PR gdb/15275, instead of
catching the error in remote_get_trace_status as presently done (which
leaves this same issue latent for another packet to trip on), or of
making ser-unix.c fake success too on failed writes, so we'd get to
readchar detecting the error on serial ports too, better let the error
propagate out of serial_write, and catch it at the remote.c level,
throwing away the target if writing fails too, instead of delaying
that until the next read.
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
PR gdb/15275
* remote.c (send_interrupt_sequence): Use remote_serial_write.
(remote_serial_write): New function.
(putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
type_unit_group ...
(struct signatured_type): ... to here.
(sig_type_ptr): New typedef.
(type_unit_group): Delete member 't.first_cu'. Move member 'tus'
out of union 't'. All uses updated.
(dw2_get_file_names_reader): Assert not called for a type unit.
(dw2_get_file_names): Assert not called for a type unit or type
unit group.
(build_type_psymtabs_reader): Assert called for a type unit.
(build_type_psymtab_dependencies): Assert called for a type unit group.
Delete arg is_dwp. All callers updated.
(open_dwp_file): New function.
(open_and_init_dwp_file): Call it.
(get_dwp_file): New function.
(lookup_dwo_cutu): Call it.
2013-03-29 Yao Qi <yao@codesourcery.com>
* corelow.c: Include "completer.h".
(_initialize_corelow): Call add_target_with_completer with
argument 'filename_completer'.
* tracepoint.c: Likewise.
* exec.c (_initialize_exec): Likewise.
* target.c (add_target): Rename to ...
(add_target_with_completer): ... this. Call set_cmd_completer
if parameter completer is not NULL.
(add_target): New.
* target.h: Include "command.h".
(add_target_with_completer): Declare it.
gdb/testsuite:
2013-03-29 Yao Qi <yao@codesourcery.com>
* gdb.base/completion.exp: Test completion of commands
"target core", "target tfile" and "target exec".
* gdb.trace/tfile.exp: Test completion of command
"target tfile".
The debugger sometimes prints strange function names for given
addresses. For instance, with the following source code...
4 procedure Foo is
5 A : Integer;
6 begin
7 Do_Nothing (A'Address);
8 end Foo;
... we can see...
(gdb) info line 5
Line 5 of "foo.adb" starts at address 0x4017ca <_ada_foo+6>
and ends at 0x4017d2 <_fu29__system__scalar_values__is_is4+7>.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
_fu29__system__scalar_values__is_is4 is an artificial symbol
generated by the linker, and interferes with the pc-to-symbol
resolution. There isn't much in the general minimal_symbol
data that could help us identify them, so this patch changes
the COFF reader to simply ignore them.
gdb/ChangeLog:
* coffread.c (is_import_fixup_symbol): New function.
(record_minimal_symbol): Use is_import_fixup_symbol to
detect import fixup symbols, and discard them.
gdb/testsuite/ChangeLog:
* gdb.ada/win_fu_syms: New testcase.
