Following the same format as the implementation in ld:
9e2bb0cb5e
Generate a .note.package FDO package metadata ELF note, following
the spec: https://systemd.io/ELF_PACKAGE_METADATA/
If the jansson library is available at build time (and it is explicitly
enabled), link ld to it, and use it to validate that the input is
correct JSON, to avoid writing garbage to the file. The
configure option --enable-jansson has to be used to explicitly enable
it (error out when not found). This allows bootstrappers (or others who
are not interested) to seamlessly skip it without issues.
elfcpp/
* elfcpp.h: Add FDO_PACKAGING_METADATA note type.
gold/
* Makefile.am: Add jansson flags and libraries.
* configure.ac: Check for jansson library.
* layout.cc (Layout::create_notes): Call create_package_metadata().
(Layout::create_package_metadata): New function.
* layout.h (Layout::create_package_metadata): New function.
(Layout::package_metadata_note_): New data member.
* options.h (class General_options): Add --package-metadata option.
* testsuite/Makefile.am (object_unittest): Add jansson libraries.
(binary_unittest): Likewise.
(leb128_unittest): Likewise.
(overflow_unittest): Likewise.
(package_metadata_test): New test.
* testsuite/package_metadata_main.c: New test source.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
Place the .note.gnu.property section before all other note sections to
avoid being placed between other note sections with different alignments.
PR gold/28494
* layout.cc (Layout::create_note): Set order to ORDER_PROPERTY_NOTE
for the .note.gnu.property section.
* layout.h (Output_section_order): Add ORDER_PROPERTY_NOTE.
When generating notoc call and branch stubs without the benefit of
pc-relative insns, the stubs need to use LR to access the run time PC.
All LR changes must be described in .eh_frame if we're to support
unwinding through asynchronous exceptions. That's what this patch
does.
The patch has gone through way too many iterations. At first I
attempted to add multiple FDEs, one for each stub. That ran into
difficulties with do_plt_fde_location which is only capable of setting
the address of a single FDE per Output_data section, and with removing
any FDEs added on a previous do_relax pass. Removing FDEs (git commit
be897fb774) went overboard in matching the FDE contents. That means
either stashing the contents created for add_eh_frame_for_plt to use
when calling remove_eh_frame_for_plt, or recreating contents on the
fly (*) just to remove FDEs. In fact, FDE content matching is quite
unnecesary. FDEs added by a previous do_relax pass are those with
u_.from_linker.post_map set. So they can easily be recognised just by
looking at that flag. This patch keeps that part of the multiple FDE
changes.
In the end I went for just one FDE per stub group to describe the call
stubs. That's reasonably efficient for the common case of only
needing to describe the __tls_get_addr_opt call stub. We don't expect
to be making many calls using notoc stubs without pc-relative insns.
*) Which has it's own set of problems. The contents must be recreated
using the old stub layout, but .eh_frame size can affect stub
requirements so you need to temporarily keep the old .eh_frame size
when creating new stubs, then reset .eh_frame size before adding new
FDEs.
* ehframe.cc (Fde::operator==): Delete.
(Cie::remove_fde): Delete.
(Eh_frame::remove_ehframe_for_plt): Delete fde_data and fde_length
parameters. Remove all post-map plt FDEs.
* ehframe.h (Fde:post_map): Make const, add variant to compare plt.
(Fde::operator==): Delete.
(Cie::remove_fde): Implement here.
(Cie::last_fde): New accessor.
(Eh_frame::remove_ehframe_for_plt): Update prototype.
* layout.cc (Layout::remove_eh_frame_for_plt): Delete fde_data and
fde_length parameters.
* layout.h (Layout::remove_eh_frame_for_plt): Update prototype.
* powerpc.cc (Stub_table::tls_get_addr_opt_bctrl_): Delete.
(Stub_table::plt_fde_len_, plt_fde_, init_plt_fde): Delete.
(Stub_table::add_plt_call_entry): Don't set tls_get_addr_opt_bctrl_.
(eh_advance): New function.
(stub_sort): New function.
(Stub_table::add_eh_frame): Emit eh_frame for notoc plt calls and
branches as well as __tls_get_addr_opt plt call stub.
(Stub_table::remove_eh_frame): Update to suit.
The original patch did not give the target enough hooks to discover that
an input object file does not have a particular property. For the
GNU_PROPERTY_X86_FEATURE_1_AND property, for example, where a missing
property should be assumed to be all zeroes, and ANDed with other
object modules, this is essential. We now store the target-specific
properties locally in the Target structure as native uint32_t fields,
then AND the per-object feature bits with the program's feature bits
when we're finished processing each input object file. The target-specific
properties are then added back to the output note section during
finalization.
gold/
PR gold/22914
* layout.cc (read_sized_value): Fix spelling of section name.
(Layout::layout_gnu_property): Call Sized_target::record_gnu_property
for target-specific properties;
don't store them with target-independent properties yet.
(Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
(Layout::create_gnu_properties_note): Call target to finalize
target-specific properties. Fix spelling of output section name.
* layout.h (Layout::merge_gnu_properties): New method.
(Layout::add_gnu_property): New method.
* object.cc (Sized_relobj_file::do_layout): Call
Layout::merge_gnu_properties.
* target.h (Target::merge_gnu_property): Remove.
(Target::finalize_gnu_properties): New method.
(Target::do_merge_gnu_property): Move to Sized_target and rename.
(Target::do_finalize_gnu_properties): New virtual method.
(Sized_target::record_gnu_property): Moved and renamed from
Target::do_merge_gnu_property.
(Sized_target::merge_gnu_properties): New virtual method.
* x86_64.cc (Target_x86_64::isa_1_used_, isa_1_needed_)
(feature_1_, object_feature_1_, seen_first_object_): New data members.
(Target_x86_64::do_merge_gnu_property): Rename to ...
(Target_x86_64::record_gnu_property): ... this. Save target-specific
properties in Target class object.
(Target_x86_64::merge_gnu_properties): New method.
(add_property): New static inline function.
(Target_x86_64::do_finalize_gnu_properties): New method.
* testsuite/Makefile.am (gnu_property_test): Remove C source file;
link directly without compiler driver.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: Add _start.
elfcpp/
PR gold/22914
* elfcpp.h (NT_GNU_PROPERTY_TYPE_0): New note type.
(GNU_PROPERTY_*): New Gnu property types.
* x86_64.h (GNU_PROPERTY_X86_FEATURE_1_IBT)
(GNU_PROPERTY_X86_FEATURE_1_SHSTK): New x86 feature bits.
gold/
PR gold/22914
* layout.cc (Layout::Layout): Initialize gnu_properties_.
(read_sized_value, write_sized_value): New functions.
(Layout::layout_gnu_property): New method.
(Layout::create_notes): Call create_gnu_properties_note.
(Layout::create_gnu_properties_note): New method.
* layout.h (Layout::layout_gnu_property): New method.
(Layout::create_gnu_properties_note): New method.
(Layout::Gnu_property, Layout::Gnu_properties): New types.
(Layout::gnu_properties_): New data member.
* object.cc (Sized_relobj_file::layout_gnu_property_section): New
method.
(Sized_relobj_file::do_layout): Handle .note.gnu.property sections.
* object.h (Sized_relobj_file::layout_gnu_property_section): New
method.
* target.h (Target::merge_gnu_property): New method.
(Target::do_merge_gnu_property): New virtual method.
* x86_64.cc (Target_x86_64::do_merge_gnu_property): New method.
* testsuite/Makefile.am (gnu_property_test): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/gnu_property_a.S: New source file.
* testsuite/gnu_property_b.S: New source file.
* testsuite/gnu_property_c.S: New source file.
* testsuite/gnu_property_main.c: New source file.
* testsuite/gnu_property_test.sh: New test script.
During a -r (or --emit-relocs) link, if two sections had the same name but
different section types, gold would put relocations for both sections into
the same relocation section even though the data sections remained separate.
For .eh_frame sections, when one section is PROGBITS and another is
X86_64_UNWIND, we really should be using the UNWIND section type and
combining the sections anyway. For other sections, we should be
creating one relocation section for each output data section.
gold/
PR gold/23016
* incremental.cc (can_incremental_update): Check for unwind section
type.
* layout.h (Layout::layout): Add sh_type parameter.
* layout.cc (Layout::layout): Likewise.
(Layout::layout_reloc): Create new output reloc section if data
section does not already have one.
(Layout::layout_eh_frame): Check for unwind section type.
(Layout::make_eh_frame_section): Use unwind section type for .eh_frame
and .eh_frame_hdr.
* object.h (Sized_relobj_file::Shdr_write): New typedef.
(Sized_relobj_file::layout_section): Add sh_type parameter.
(Sized_relobj_file::Deferred_layout::Deferred_layout): Add sh_type
parameter.
* object.cc (Sized_relobj_file::check_eh_frame_flags): Check for
unwind section type.
(Sized_relobj_file::layout_section): Add sh_type parameter; pass it
to Layout::layout.
(Sized_relobj_file::do_layout): Make local copy of sh_type.
Force .eh_frame sections to unwind section type.
Pass sh_type to layout_section.
(Sized_relobj_file<size, big_endian>::do_layout_deferred_sections):
Pass sh_type to layout_section.
* output.cc (Output_section::Output_section): Initialize reloc_section_.
* output.h (Output_section::reloc_section): New method.
(Output_section::set_reloc_section): New method.
(Output_section::reloc_section_): New data member.
* target.h (Target::unwind_section_type): New method.
(Target::Target_info::unwind_section_type): New data member.
* aarch64.cc (aarch64_info): Add unwind_section_type.
* arm.cc (arm_info, arm_nacl_info): Likewise.
* i386.cc (i386_info, i386_nacl_info, iamcu_info): Likewise.
* mips.cc (mips_info, mips_nacl_info): Likewise.
* powerpc.cc (powerpc_info): Likewise.
* s390.cc (s390_info): Likewise.
* sparc.cc (sparc_info): Likewise.
* tilegx.cc (tilegx_info): Likewise.
* x86_64.cc (x86_64_info, x86_64_nacl_info): Likewise.
* testsuite/Makefile.am (pr23016_1, pr23016_2): New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/testfile.cc: Add unwind_section_type.
* testsuite/pr23016_1.sh: New test script.
* testsuite/pr23016_1a.s: New source file.
* testsuite/pr23016_1b.s: New source file.
* testsuite/pr23016_2.sh: New test script.
* testsuite/pr23016_2a.s: New source file.
* testsuite/pr23016_2b.s: New source file.
This option does not merge certain text sections with prefixes
.text.hot, .text.unlikely, .text.startup and .text.exit.
* layout.cc (Layout::default_section_order): Check for text section
prefixes.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
(Layout::output_section_name): Check for text section prefixes.
* layout.h (Output_section_order::ORDER_TEXT_HOT): New enum value.
(Output_section_order::ORDER_TEXT_STARTUP): New enum value.
(Output_section_order::ORDER_TEXT_EXIT): New enum value.
(Output_section_order::ORDER_TEXT_UNLIKELY): New enum value.
(Layout::text_section_name_mapping): New static member.
(Layout::text_section_name_mapping_count): New static member.
(Layout::match_section_name): New static function.
* options.h (keep_text_section_prefix): New -z option.
* testsuite/Makefile.am (keep_text_section_prefix): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/keep_text_section_prefix.cc: New test source.
* testsuite/keep_text_section_prefix.sh: New test script.
There is a very small but non-zero probability that a stub group
contains stubs on one relax pass, but does not on the next. In that
case we would get an FDE covering a zero length address range.
(Actually, it's even worse. Alignment padding for stubs can mean the
address for the non-existent stubs is past the end of the original
section to which stubs are attached, and due to the way
do_plt_fde_location calculates the length we can get a negative
length.) Fixing this properly requires removing the FDE.
Also, I have been implementing the __tls_get_addr_opt support for
gold, and that stub needs something other than the default FDE. The
necessary FDE will depend on the offset to the __tls_get_addr_opt
stub, which of course can change during relaxation. That means at the
very least, rewriting the FDE on each pass, possibly changing the FDE
size. I think that is better done by completely recreating PLT
eh_frame FDEs.
* ehframe.cc (Fde::operator==): New.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): New.
* ehframe.h (Fde::operator==): Declare.
(Cie::remove_fde, Eh_frame::remove_ehframe_for_plt): Likewise.
* layout.cc (Layout::remove_eh_frame_for_plt): New.
* layout.h (Layout::remove_eh_frame_for_plt): Declare.
* powerpc.cc (Target_powerpc::do_relax): Remove old eh_frame FDEs.
(Stub_table::add_eh_frame): Delete eh_frame_added_ condition.
Don't add eh_frame for empty stub section.
(Stub_table::remove_eh_frame): New.
Gold was not placing forced-local symbols (e.g., hidden visibility)
at the front of the dynamic symbol table, or including them in the
count of local symbols recorded in the .dynsym section's sh_info field.
gold/
* layout.cc (Layout::finalize): Track count of forced-local symbols
in .dynsym.
(Layout::create_symtab_sections): Add local_dynamic_count parameter;
use that instead of sh_info value.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter; pass it to Symtab::set_dynsym_indexes(). Include forced
locals in sh_info value. Pass index of first real global to
Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table().
* layout.h (Layout::create_symtab_sections): Add local_dynamic_count
parameter.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter.
* symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter. Process forced-local symbols first and return the count.
(Symbol_table::finalize): Update comments.
* symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.
(Symbol_table::first_dynamic_global_index_): Update comment.
(Symbol_table::dynamic_count_): Update comment.
* testsuite/Makefile.am (ifuncmod1.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ifuncmod1.sh: New shell script.
gold/
PR gold/19019
* layout.h (Layout::add_target_specific_dynamic_tag): New function.
* layout.cc (Layout::add_target_specific_dynamic_tag): New function.
* mips.cc (Target_mips::make_symbol): Adjust function signature.
* sparc.cc (Target_sparc::Target_sparc): Initialize register_syms_.
(Target_sparc::do_is_defined_by_abi): Remove test for
STT_SPARC_REGISTER.
(Target_sparc::Register_symbol): New struct type.
(Target_sparc::register_syms_): New data member.
(Target_sparc<64, true>::sparc_info): Set has_make_symbol to true.
(Target_sparc::make_symbol): New function.
(Target_sparc::do_finalize_sections): Add register symbols and new
dynamic table entries.
* symtab.h (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::add_target_global_symbol): New function.
(Symbol_table::target_symbols_): New data member.
* symtab.cc (Sized_symbol::init_undefined): Add value parameter.
(Symbol_table::Symbol_table): Initialize target_symbols_.
(Symbol_table::add_from_object): Pass additional parameters to
Target::make_symbol.
(Symbol_table::define_special_symbol): Likewise.
(Symbol_table::add_undefined_symbol_from_command_line): Pass 0 for
undefined symbol value.
(Symbol_table::set_dynsym_indexes): Process target-specific symbols.
(Symbol_table::sized_finalize): Likewise.
(Symbol_table::sized_write_globals): Likewise.
* target.h (Sized_target::make_symbol): Add name, st_type, object,
st_shndx, and value parameters.
When laying out .debug_* sections, we translate the names of compressed
debug sections that start with ".zdebug", but when processing input
section specs in a linker script, we do not handle the translation there.
This results in an internal error as reported in PR 17731.
gold/
PR gold/17731
* layout.cc (corresponding_uncompressed_section_name): New function.
(Layout::choose_output_section): Call it.
* layout.h (corresponding_uncompressed_section_name): New function.
* script-sections.cc (Input_section_info::set_section_name): Check
for compressed debug section (.zdebug style).
When --build-id=tree is selected, gold would schedule a set of
tasks to run to compute md5 hashes in parallel on chunks of the
file. The scheduling was done before the
Write_after_input_sections_task ran, so if we are compressing
debug sections, the output file will change size and be remapped
to a new address, sometimes causing the build id computation to
crash, but even when it doesn't crash, it wouldn't include the
debug information in the hash computation.
This patch delays the scheduling of the md5 tasks until after
Write_after_input_sections_task.
gold/
PR gold/17819
* gold.cc (queue_final_tasks): When --build-id=tree, queue a
separate task to schedule the build id computation.
* layout.cc (Hash_task::Hash_task): Remove build_id_blocker,
add Output_file and offset.
(Hash_task::run): Get and release the input views.
(Hash_task::is_runnable): Always return NULL (always runnable).
(Layout::queue_build_id_tasks): Remove.
(Layout::write_build_id): Add array_of_hashes and size_of_hashes
parameters; use them instead of class members.
(Build_id_task_runner::run): New function.
(Close_task_runner::run): Pass array_of_hashes and size_of_hashes
to write_build_id.
* layout.h (Layout::queue_build_id_tasks): Remove.
(Layout::write_build_id): Add array_of_hashes and size_of_hashes
parameters.
(Layout::array_of_hashes_): Remove.
(Layout::size_of_array_of_hashes_): Remove.
(Layout::input_view_): Remove.
(Build_id_task_runner): New class.
(Close_task_runner::Close_task_runner): Add array_of_hashes and
size_of_hashes parameters.
(Close_task_runner::array_of_hashes_): New data member.
(Close_task_runner::size_of_hashes_): New data member.
* testsuite/Makefile.am
(flagstest_compress_debug_sections_and_build_id_tree): New test.
* testsuite/Makefile.in: Regenerate.
Because the __EH_FRAME_BEGIN__ symbol is provided in an empty .eh_frame
section in crtbeginT.o, if crt1.o has a non-empty .eh_frame section,
we place all optimized .eh_frame sections into the output section ahead
of the __EH_FRAME_BEGIN__ symbol, which breaks EH for statically-linked
binaries.
This patch fixes the problem by delaying the attachment of the optimized
.eh_frame sections to the output section until we see the end marker
section (or to the end of pass 1 if we never see an end marker).
gold/
PR gold/14675
* ehframe.cc (Eh_frame::add_ehframe_input_section): Change return type;
return enum indicating whether .eh_frame section is empty, optimizable,
unrecognized, or an end marker. Adjust explicit instantiations.
* ehframe.h (Eh_frame::Eh_frame_section_disposition): New enum type.
(Eh_frame::add_ehframe_input_section): Change return type.
* gold.cc (queue_middle_tasks): Call Layout::finalize_eh_frame_section.
* layout.cc (Layout::layout_eh_frame): Don't add optimized sections
to the .eh_frame output section until we see the end marker.
(Layout::finalize_eh_frame_section): New.
* layout.h: (Layout::finalize_eh_frame_section): New.
* output.cc (Output_segment::set_section_addresses): Take new
Target* argument. If target->isolate_execinstr() and the segment
is executable and starts at a target->abi_pagesize() boundary,
pad its end out to a target->abi_pagesize() boundary with code fill.
* output.h (Output_segment::set_section_addresses): Update decl.
* layout.h (Layout::check_output_data_for_reset_values): Take new
argument RELAX_OUTPUTS.
(Layout): New member relax_output_list_.
(Layout::add_relax_output): New method.
* layout.cc (Layout::Layout): Update constructor.
(Layout::reset_relax_output): New method.
(Layout::clean_up_after_relaxation): Call it.
(Layout::prepare_for_relaxation): Update caller.
(Layout::set_segment_offsets): Update callers of set_section_addresses.
Call reset_relax_output before re-processing segments for
isolate_execinstr case.
(Layout::write_data): Handle relax_output_list_.
(Layout::Relaxation_debug_check::check_output_data_for_reset_values):
Take new argument RELAX_OUTPUTS. Assert it's an empty collection.
gold/
* gold.cc (queue_final_tasks): invoke layout->queue_build_id_tasks().
* layout.cc (Hash_task): New class.
(Layout::queue_build_id_tasks): New function.
(Layout::write_build_id): Handle single-thread portion of build ID
computation. (In some cases, all of it is single-threaded.) Replace
{sha1,md5}_process_bytes with {sha1,md5}_buffer to get the same
functionality in fewer lines of code.
* layout.h (Layout::queue_build_id_tasks): New function declaration.
* options.h (General_options): make "--build-id" default to tree
rather than sha1. Add two new options related to --build-id=tree:
--build-id-chunk-size-for-treehash and
--build-id-min-file-size-for-treehash.
* Makefile.am: add testing of --build-id=tree and related new options
(these tests will be invoked by "make check").
* Makefile.in: Regenerate.
function.
(Layout::layout): If input section requires special ordering, must
sort input sections.
(Layout::make_output_section): May sort .text input sections.
(Layout::is_section_name_prefix_grouped): Remove.
* layout.h (class Layout): Declare
special_ordering_of_input_section. Don't declare
is_section_name_prefix_grouped.
* output.cc (Output_section::add_input_section): Revert last
change.
(Output_section::Input_section_sort::match_file_name): Don't crash
if called on output section data.
(Output_section::Input_section_sort_compare): Sort based on
special ordering.
(Output_section::Input_section_sort_section_order_index_compare):
Revert last patch.
(Output_section::sort_attached_input_sections): Likewise.
by default.
2012-12-18 Sriraman Tallam <tmsriram@google.com>
* layout.cc (Layout::is_section_name_prefix_grouped): New function.
* layout.h (Layout::is_section_name_prefix_grouped): New function.
* output.cc (Output_section::add_input_section): Check if section
name contains special prefix. Keep input sections to sort such
sections.
(Output_section::Input_section_sort_section_order_index_compare
::operator()): Group sections according to prefixes.
* (Output_section::sort_attached_input_sections): Add condition
to Input_section_entry constructor call.
* testsuite/Makefile.am (text_section_grouping): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/text_section_grouping.cc: New file.
* testsuite/text_section_grouping.sh: New file.
* layout.cc (Layout::get_executable_sections): New function.
* arm.cc (Target_arm::group_sections): Use it.
(Arm_output_section::group_sections): Delete now redundant test.
* output.cc (Output_reloc::Output_reloc): Add is_relative.
param to handle relative relocs.
* output.h (Output_reloc::Output_reloc <absolute reloc>): Likewise.
(Output_data_reloc::add_absolute): Adjust.
(Output_data_reloc::add_relative): New function.
(Output_data::reset_data_size): New function.
(Output_relaxed_input_section::set_relobj, set_shndx): New functions.
(Output_section::set_addralign): New function.
(Output_section::checkpoint_set_addralign): New function.
(Output_section::clear_section_offsets_need_adjustment): New function.
(Output_section::input_sections): Make public.
* powerpc.cc (class Output_data_brlt_powerpc): New.
(class Stub_table, class Stub_control): New.
(Powerpc_relobj::has14_, set_has_14bit_branch, has_14bit_branch,
stub_table_, set_stub_table, stub_table): New vectors and accessor
functions.
(Target_powerpc::do_may_relax, do_relax, push_branch,
new_stub_table, stub_tables, brlt_section, group_sections,
add_branch_lookup_table, find_branch_lookup_table,
write_branch_lookup_table, make_brlt_section): New functions.
(Target_powerpc::struct Sort_sections, class Branch_info): New.
(Target_powerpc::brlt_section_, stub_tables_, branch_lookup_table_,
branch_info_): New vars.
(Target_powerpc::make_plt_entry, make_local_ifunc_plt_entry): Don't
make call stubs here.
(Output_data_glink): Remove all call stub handling from this class.
(Target_powerpc::Scan::local, global): Save interesting branch
relocs and relocs for ifunc. Adjust calls to plt entry functions.
(Target_powerpc::do_finalize_sections): Only make reg save/restore
functions on final link.
(Target_powerpc::Relocate::relocate): Adjust lookup of call stubs.
Handle long branch destinations too.
(Target_powerpc::do_dynsym_value, do_plt_address_for_global,
do_plt_address_for_local): Adjust lookup of plt call stubs.
segments.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* gold.cc (queue_middle_tasks): Call layout again when unique
segments for sections is desired.
* layout.cc (Layout::Layout): Initialize new members.
(Layout::get_output_section_flags): New function.
(Layout::choose_output_section): Call get_output_section_flags.
(Layout::layout): Make output section for mapping to a unique segment.
(Layout::insert_section_segment_map): New function.
(Layout::attach_allocated_section_to_segment): Make unique segment for
output sections marked so.
(Layout::segment_precedes): Check for unique segments when sorting.
* layout.h (Layout::Unique_segment_info): New struct.
(Layout::Section_segment_map): New typedef.
(Layout::insert_section_segment_map): New function.
(Layout::get_output_section_flags): New function.
(Layout::is_unique_segment_for_sections_specified): New function.
(Layout::set_unique_segment_for_sections_specified): New function.
(Layout::unique_segment_for_sections_specified_): New member.
(Layout::section_segment_map_): New member.
* object.cc (Sized_relobj_file<size, big_endian>::do_layout):
Rename is_gc_pass_one to is_pass_one.
Rename is_gc_pass_two to is_pass_two.
Rename is_gc_or_icf to is_two_pass.
Check for which pass based on whether symbols data is present.
Make it two pass when unique segments for sections is desired.
* output.cc (Output_section::Output_section): Initialize new
members.
* output.h (Output_section::is_unique_segment): New function.
(Output_section::set_is_unique_segment): New function.
(Output_section::is_unique_segment_): New member.
(Output_section::extra_segment_flags): New function.
(Output_section::set_extra_segment_flags): New function.
(Output_section::extra_segment_flags_): New member.
(Output_section::segment_alignment): New function.
(Output_section::set_segment_alignment): New function.
(Output_section::segment_alignment_): New member.
(Output_segment::Output_segment): Initialize is_unique_segment_.
(Output_segment::is_unique_segment): New function.
(Output_segment::set_is_unique_segment): New function.
(Output_segment::is_unique_segment_): New member.
* plugin.cc (allow_unique_segment_for_sections): New function.
(unique_segment_for_sections): New function.
(Plugin::load): Add new functions to transfer vector.
* Makefile.am (plugin_final_layout.readelf.stdout): Add readelf output.
* Makefile.in: Regenerate.
* testsuite/plugin_final_layout.sh: Check if unique segment
functionality works.
* testsuite/plugin_section_order.c (onload): Check if new interfaces
are available.
(allow_unique_segment_for_sections): New global.
(unique_segment_for_sections): New global.
(claim_file_hook): Call allow_unique_segment_for_sections.
(all_symbols_read_hook): Call unique_segment_for_sections.
2012-08-24 Sriraman Tallam <tmsriram@google.com>
* plugin-api.h (ld_plugin_allow_unique_segment_for_sections):
New interface.
(ld_plugin_unique_segment_for_sections): New interface.
(LDPT_ALLOW_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(LDPT_UNIQUE_SEGMENT_FOR_SECTIONS): New enum val.
(tv_allow_unique_segment_for_sections): New member.
(tv_unique_segment_for_sections): New member.
* script-sections.cc (Sections_element::output_section_name): Add
keep return parameter.
(Output_section_element::match_name): Add keep return parameter.
Return the value of the keep_ member.
* script-sections.h (class Output_section): Update
output_section_name prototype.
* layout.cc (Layout::keep_input_section): New public member
function.
(Layout::choose_output_section): Pass keep parameter to
output_section_name.
* layout.h (class Layout): Add keep_input_section.
* object.cc (Sized_relobj_file::do_layout): Check for kept input
sections.
* testsuite/Makefile.am: Add a test.
* testsuite/Makefile.in: Regenerate.
* testsuite/pr14265.c: Source file for the test.
* testsuite/pr14265.t: Linker script for the test.
* testsuite/pr14265.sh: Shell script for the test.
* ld-gc/gc.exp: Add a new test.
* ld-gc/pr14265.c: Source file for the new test.
* ld-gc/pr14265.t: Linker script for the new test.
* ld-gc/pr14265.d: Expected symbol dump.
* configure: Regenerate.
gold/
* nacl.cc: New file.
* nacl.h: New file.
* Makefile.am (CCFILES, HFILES): Add them.
* Makefile.in: Regenerate.
* i386.cc (Output_data_plt_i386_nacl): New class.
(Output_data_plt_i386_nacl_exec): New class.
(Output_data_plt_i386_nacl_dyn): New class.
(Target_i386_nacl): New class.
(Target_selector_i386_nacl): New class.
(target_selector_i386): Use it instead of Target_selector_i386.
* x86_64.cc (Output_data_plt_x86_64_nacl): New class.
(Target_x86_64_nacl): New class.
(Target_selector_x86_64_nacl): New class.
(target_selector_x86_64, target_selector_x32): Use it instead of
Target_selector_x86_64.
* arm.cc (Output_data_plt_arm_nacl): New class.
(Target_arm_nacl): New class.
(Target_selector_arm_nacl): New class.
(target_selector_arm, target_selector_armbe): Use it instead of
Target_selector_arm.
* target-select.cc (select_target): Take new Input_file* and off_t
arguments, pass them on to recognize method of selector.
* object.cc (make_elf_sized_object): Update caller.
* parameters.cc (parameters_force_valid_target): Likewise.
* incremental.cc (make_sized_incremental_binary): Likewise.
* target-select.h: Update decl.
(Target_selector::recognize): Take new Input_file* argument,
pass it on to do_recognize.
(Target_selector::do_recognize): Take new Input_file* argument.
* freebsd.h (Target_selector_freebsd::do_recognize): Likewise.
* powerpc.cc (Target_selector_powerpc::do_recognize): Likewise.
* sparc.cc (Target_selector_sparc::do_recognize): Likewise.
* testsuite/testfile.cc (Target_selector::do_recognize): Likewise.
* target.h (Target::Target_info): New members isolate_execinstr
and rosegment_gap.
(Target::isolate_execinstr, Target::rosegment_gap): New methods.
* arm.cc (Target_arm::arm_info): Update initializer.
* i386.cc (Target_i386::i386_info): Likewise.
* powerpc.cc (Target_powerpc::powerpc_info): Likewise.
* sparc.cc (Target_sparc::sparc_info): Likewise.
* x86_64.cc (Target_x86_64::x86_64_info): Likewise.
* testsuite/testfile.cc (Target_test::test_target_info): Likewise.
* layout.cc (Layout::attach_allocated_section_to_segment):
Take new const Target* argument. If target->isolate_execinstr(), act
like --rosegment.
(Layout::find_first_load_seg): Take new const Target* argument;
if target->isolate_execinstr(), reject PF_X segments.
(Layout::relaxation_loop_body): Update caller.
(Layout::set_segment_offsets): If target->isolate_execinstr(),
reset file offset to zero when we hit LOAD_SEG, and then do a second
loop over the segments before LOAD_SEG to reassign offsets after
addresses have been determined. Handle target->rosegment_gap().
(Layout::attach_section_to_segment): Take new const Target* argument;
pass it to attach_allocated_section_to_segment.
(Layout::make_output_section): Update caller.
(Layout::attach_sections_to_segments): Take new const Target* argument;
pass it to attach_section_to_segment.
* gold.cc (queue_middle_tasks): Update caller.
* layout.h (Layout): Update method decls with new arguments.
* arm.cc (Target_arm::Target_arm): Take optional argument for the
Target_info pointer to use.
(Target_arm::do_make_data_plt): New virtual method.
(Target_arm::make_data_plt): New method that calls it.
(Target_arm::make_plt_entry): Use it.
(Output_data_plt_arm::Output_data_plt_arm): Take additional argument
for the section alignment.
(Output_data_plt_arm::do_first_plt_entry_offset): New abstract virtual
method.
(Output_data_plt_arm::first_plt_entry_offset): Call it.
(Output_data_plt_arm::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_arm::get_plt_entry_size): Call it.
(Output_data_plt_arm::do_fill_plt_entry): New abstract virtual method.
(Output_data_plt_arm::fill_plt_entry): New method that calls it.
(Output_data_plt_arm::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_arm::fill_first_plt_entry): New method that calls it.
(Output_data_plt_arm::set_final_data_size): Use get_plt_entry_size
method instead of sizeof(plt_entry).
(Output_data_plt_arm::add_entry): Likewise.
Use first_plt_entry_offset method instead of sizeof(first_plt_entry).
(Target_arm::first_plt_entry_offset): Call method on this->plt_ rather
than static method.
(Target_arm::plt_entry_size): Likewise.
(Output_data_plt_arm::first_plt_entry, Output_data_plt_arm::plt_entry):
Move to ...
(Output_data_plt_arm_standard): ... here, new class.
(Output_data_plt_arm::do_write): Move guts of PLT filling to...
(Output_data_plt_arm_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_arm_standard::do_fill_plt_entry): ... and here.
* x86_64.cc (Output_data_plt_x86_64::Output_data_plt_x86_64):
Take additional argument for the PLT entry size.
(Output_data_plt_x86_64::get_tlsdesc_plt_offset):
Use get_plt_entry_size method rather than plt_entry_size variable.
(Output_data_plt_x86_64::reserve_slot): Likewise.
(Output_data_plt_x86_64::do_adjust_output_section): Likewise.
(Output_data_plt_x86_64::add_entry): Likewise.
(Output_data_plt_x86_64::add_local_ifunc_entry): Likewise.
(Output_data_plt_x86_64::address_for_global): Likewise.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::set_final_data_size): Likewise.
(Output_data_plt_x86_64::first_plt_entry_offset): Likewise.
Make method non-static.
(Output_data_plt_x86_64::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_x86_64::get_plt_entry_size): Just call that.
(Output_data_plt_x86_64::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_x86_64::add_eh_frame): New method to call it.
(Output_data_plt_x86_64::do_fill_first_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_first_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_plt_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_plt_entry): New method to call it.
(Output_data_plt_x86_64::do_fill_tlsdesc_entry): New abstract
virtual method.
(Output_data_plt_x86_64::fill_tlsdesc_entry): New method to call it.
(Output_data_plt_x86_64::plt_entry_size)
(Output_data_plt_x86_64::first_plt_entry)
(Output_data_plt_x86_64::plt_entry)
(Output_data_plt_x86_64::tlsdesc_plt_entry)
(Output_data_plt_x86_64::plt_eh_frame_fde_size)
(Output_data_plt_x86_64::plt_eh_frame_fde): Move to ...
(Output_data_plt_x86_64_standard): ... here, new class.
(Target_x86_64::Target_x86_64): Take optional argument for the
Target_info pointer to use.
(Target_x86_64::do_make_data_plt): New virtual method.
(Target_x86_64::make_data_plt): New method to call it.
(Target_x86_64::init_got_plt_for_update): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_x86_64::init): Don't do add_eh_frame_for_plt here.
(Target_x86_64::first_plt_entry_offset): Call method on this->plt_
rather than static method.
(Target_x86_64::plt_entry_size): Likewise.
(Output_data_plt_x86_64::do_write): Use get_plt_entry_size method
rather than plt_entry_size variable. Move guts of PLT filling to...
(Output_data_plt_x86_64_standard::do_fill_first_plt_entry): ... here ...
(Output_data_plt_x86_64_standard::do_fill_plt_entry): ... and here ...
(Output_data_plt_x86_64_standard::do_fill_tlsdesc_entry): ... and here.
* i386.cc (Output_data_plt_i386::Output_data_plt_i386): Take
additional argument for the section alignment.
Don't do add_eh_frame_for_plt here.
(Output_data_plt_i386::first_plt_entry_offset): Make the method
non-static. Use get_plt_entry_size method rather than plt_entry_size
variable.
(Output_data_plt_i386::do_get_plt_entry_size): New abstract virtual
method.
(Output_data_plt_i386::get_plt_entry_size): Call it.
(Output_data_plt_i386::do_add_eh_frame): New abstract virtual method.
(Output_data_plt_i386::add_eh_frame): New method to call it.
(Output_data_plt_i386::do_fill_first_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_first_plt_entry): New method to call it.
(Output_data_plt_i386::do_fill_plt_entry): New abstract virtual
method.
(Output_data_plt_i386::fill_plt_entry): New method to call it.
(Output_data_plt_i386::set_final_data_size): Use get_plt_entry_size
method instead of plt_entry_size.
(Output_data_plt_i386::plt_entry_size)
(Output_data_plt_i386::plt_eh_frame_fde_size)
(Output_data_plt_i386::plt_eh_frame_fde): Move to ...
(Output_data_plt_i386_standard): ... here, new class.
(Output_data_plt_i386_exec): New class.
(Output_data_plt_i386::exec_first_plt_entry): Move to ...
(Output_data_plt_i386_exec::first_plt_entry): ... here.
(Output_data_plt_i386::exec_plt_entry): Move to ...
(Output_data_plt_i386_exec::plt_entry): ... here.
(Output_data_plt_i386_dyn): New class.
(Output_data_plt_i386::first_plt_entry): Move to ...
(Output_data_plt_i386_dyn::first_plt_entry): ... here.
(Output_data_plt_i386::dyn_plt_entry): Move to ...
(Output_data_plt_i386_dyn::plt_entry): ... here.
(Target_i386::Target_i386): Take optional argument for the Target_info
pointer to use.
(Target_i386::do_make_data_plt): New virtual method.
(Target_i386::make_data_plt): New method to call it.
(Target_i386::make_plt_section): Use that.
Call this->plt_->add_eh_frame method here.
(Output_data_plt_i386::add_entry): Use get_plt_entry_size method
rather than plt_entry_size variable.
(Output_data_plt_i386::add_local_ifunc_entry): Likewise.
(Output_data_plt_i386::address_for_local): Likewise.
(Output_data_plt_i386::do_write): Likewise.
Move guts of PLT filling to...
(Output_data_plt_i386_exec::do_fill_first_plt_entry): ... here ...
(Output_data_plt_i386_exec::do_fill_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_first_plt_entry): ... and here ...
(Output_data_plt_i386_dyn::do_fill_plt_entry): ... and here.
Change-Id: Id24b95600489835ff5e860a39c147203d4380c2b
* Makefile.am: Add gdb-index.cc, gdb-index.h.
* Makefile.in: Regenerate.
* dwarf_reader.cc (Sized_elf_reloc_mapper::do_initialize): New function.
(Sized_elf_reloc_mapper::symbol_section): New function.
(Sized_elf_reloc_mapper::do_get_reloc_target): New function.
(make_elf_reloc_mapper): New function.
(Dwarf_abbrev_table::clear_abbrev_codes): New function.
(Dwarf_abbrev_table::do_read_abbrevs): New function.
(Dwarf_abbrev_table::do_get_abbrev): New function.
(Dwarf_ranges_table::read_ranges_table): New function.
(Dwarf_ranges_table::read_range_list): New function.
(Dwarf_pubnames_table::read_section): New function.
(Dwarf_pubnames_table::read_header): New function.
(Dwarf_pubnames_table::next_name): New function.
(Dwarf_die::Dwarf_die): New function.
(Dwarf_die::read_attributes): New function.
(Dwarf_die::skip_attributes): New function.
(Dwarf_die::set_name): New function.
(Dwarf_die::set_linkage_name): New function.
(Dwarf_die::attribute): New function.
(Dwarf_die::string_attribute): New function.
(Dwarf_die::int_attribute): New function.
(Dwarf_die::uint_attribute): New function.
(Dwarf_die::ref_attribute): New function.
(Dwarf_die::child_offset): New function.
(Dwarf_die::sibling_offset): New function.
(Dwarf_info_reader::check_buffer): New function.
(Dwarf_info_reader::parse): New function.
(Dwarf_info_reader::do_parse): New function.
(Dwarf_info_reader::do_read_string_table): New function.
(Dwarf_info_reader::lookup_reloc): New function.
(Dwarf_info_reader::get_string): New function.
(Dwarf_info_reader::visit_compilation_unit): New function.
(Dwarf_info_reader::visit_type_unit): New function.
(Sized_dwarf_line_info::Sized_dwarf_line_info): Use
Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::symbol_section): Remove function.
(Sized_dwarf_line_info::read_relocs): Use Sized_elf_reloc_mapper.
(Sized_dwarf_line_info::read_line_mappings): Remove object
parameter, adjust callers.
(Sized_dwarf_line_info::format_file_lineno): Fix type of cast.
* dwarf_reader.h: Include <sys/types.h>.
(class Track_relocs): Remove forward declaration.
(class Elf_reloc_mapper): New class.
(class Sized_elf_reloc_mapper): New class.
(class Dwarf_abbrev_table): New class.
(class Dwarf_range_list): New class.
(class Dwarf_ranges_table): New class.
(class Dwarf_pubnames_table): New class.
(class Dwarf_die): New class.
(class Dwarf_info_reader): New class.
(Sized_dwarf_line_info::read_line_mappings): Remove object parameter.
(Sized_dwarf_line_info::symbol_section): Remove member function.
* dynobj.h (Sized_dynobj::do_section_contents): Refactor code from
base class.
* gdb-index.cc: New source file.
* gdb-index.h: New source file.
* incremental.cc (Sized_relobj_incr::do_layout): Track .debug_info
and .debug_types sections, call Layout::add_to_gdb_index.
(Sized_relobj_incr::do_section_name): Implement.
(Sized_relobj_incr::do_section_contents): Adjust parameter list and
return type; Implement.
(Sized_incr_dynobj::do_section_contents): Adjust parameter list and
return type.
* incremental.h (Sized_relobj_incr::do_section_contents): Adjust
parameter list and return type.
(Sized_incr_dynobj::do_section_contents): Likewise.
* layout.cc: Include gdb-index.h.
(Layout::Layout): Initialize gdb_index_data_.
(Layout::init_fixed_output_section): Check for .gdb_index section.
(Layout::add_to_gdb_index): New function. Instantiate.
* layout.h: Add forward declaration for class Gdb_index.
(Layout::add_to_gdb_index): New member function.
(Layout::gdb_index_data_): New data member.
* main.cc: Include gdb-index.h.
(main): Print statistics for gdb index.
* object.cc (Object::section_contents): Move code into
do_section_contents.
(need_decompressed_section): Check for sections needed when building
gdb index.
(build_compressed_section_map): Likewise.
(Sized_relobj_file::do_read_symbols): Need local symbols when building
gdb index.
(Sized_relobj_file::do_layout): Track .debug_info and .debug_types
sections; call Layout::add_to_gdb_index.
(Sized_relobj_file::do_decompressed_section_contents): Call
do_section_contents directly.
* object.h (Object::do_section_contents): Adjust parameter list and
return type.
(Object::do_decompressed_section_contents): Call do_section_contents
directly.
(Sized_relobj_file::do_section_contents): Adjust parameter list and
return type.
* options.h (class General_options): Add --gdb-index option.
* plugin.cc (Sized_pluginobj::do_section_contents): Adjust parameter
list and return type.
* plugin.h (Sized_pluginobj::do_section_contents): Likewise.
* reloc.h (Track_relocs::checkpoint): New function.
(Track_relocs::reset): New function.
* testsuite/Makefile.am (gdb_index_test_1.sh, gdb_index_test_2.sh):
New test cases.
* testsuite/Makefile.in: Regenerate.
* testsuite/gdb_index_test.cc: New test source file.
* testsuite/gdb_index_test_1.sh: New test source file.
* testsuite/gdb_index_test_2.sh: New test source file.
* layout.h (section_order_map_): New member.
(get_section_order_map): New member function.
* output.cc (Output_section::add_input_section): Check for patterns
only when --section-ordering-file is specified.
* gold.cc (queue_middle_tasks): Delay updating order of sections till
output_sections have been formed.
* layout.cc (Layout_Layout): Initialize section_order_map_.
* plugin.cc (update_section_order): Store order in order_map. Do not
update the order.
* testsuite/Makefile.am: Add test case for plugin_final_layout.
* testsuite/Makefile.in: Regenerate.
* testsuite/plugin_section_order.c: New file.
* testsuite/plugin_final_layout.cc: New file.
* testsuite/plugin_final_layout.sh: New file.
remaining hole size when allocating.
(Layout::make_output_section): Set fill methods for debug sections.
* layout.h (Free_list::Free_list_node): Move from private to
public.
(Free_list::set_min_hole_size): New function.
(Free_list::begin, Free_list::end): New functions.
(Free_list::min_hole_): New data member.
* output.cc: Include dwarf.h.
(Output_fill_debug_info::do_minimum_hole_size): New function.
(Output_fill_debug_info::do_write): New function.
(Output_fill_debug_line::do_minimum_hole_size): New function.
(Output_fill_debug_line::do_write): New function.
(Output_section::Output_section): Initialize new data member.
(Output_section::set_final_data_size): Ensure patch space is larger
than minimum hole size.
(Output_section::do_write): Fill holes in debug sections.
* output.h (Output_fill): New class.
(Output_fill_debug_info): New class.
(Output_fill_debug_line): New class.
(Output_section::set_free_space_fill): New function.
(Output_section::free_space_fill_): New data member.
* testsuite/Makefile.am (incremental_test_3): Add
--incremental-patch option.
(incremental_test_4): Likewise.
(incremental_test_5): Likewise.
(incremental_test_6): Likewise.
(incremental_copy_test): Likewise.
(incremental_common_test_1): Likewise.
* testsuite/Makefile.in: Regenerate.
(Output_data_plt_i386::Output_data_plt_i386): Initialize layout_.
(Output_data_plt_i386::do_write): Write address of .dynamic
section to first entry in .got.plt section.
* x86_64.cc (class Output_data_plt_x86_64): Add layout_ field.
(Output_data_plt_x86_64::Output_data_plt_x86_64) [both versions]:
Initialize layout_.
(Output_data_plt_x86_64::do_write): Write address of .dynamic
section to first entry in .got.plt section.
* layout.h (Layout::dynamic_section): New function.
* plugin-api.h
(ld_plugin_section): New struct.
(ld_plugin_get_section_count): New typedef.
(ld_plugin_get_section_type): New typedef.
(ld_plugin_get_section_name): New typedef.
(ld_plugin_get_section_contents): New typedef.
(ld_plugin_update_section_order): New typedef.
(ld_plugin_allow_section_ordering): New typedef.
(LDPT_GET_SECTION_COUNT): New enum value.
(LDPT_GET_SECTION_TYPE): New enum value.
(LDPT_GET_SECTION_NAME): New enum value.
(LDPT_GET_SECTION_CONTENTS): New enum value.
(LDPT_UPDATE_SECTION_ORDER): New enum value.
(LDPT_ALLOW_SECTION_ORDERING): New enum value.
(tv_get_section_count): New struct members.
(tv_get_section_type): New struct members.
(tv_get_section_name): New struct members.
(tv_get_section_contents): New struct members.
(tv_update_section_order): New struct members.
(tv_allow_section_ordering): New struct members.
* archive.cc (Archive::get_elf_object_for_member): Add extra parameter
to claim_file call.
* layout.cc (Layout::Layout): Initialize section_ordering_specified_,
input_section_position_, and input_section_glob_.
(read_layout_from_file): Call function section_ordering_specified.
* layout.h (is_section_ordering_specified): New function.
(section_ordering_specified): New function.
(section_ordering_specified_): New boolean member.
* main.cc(main): Call load_plugins after layout object is defined.
* output.cc (Output_section::add_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
* output.cc (Output_section::add_relaxed_input_section): Use
function section_ordering_specified to check if section ordering is
needed.
(Output_section::update_section_layout): New function.
(Output_section::sort_attached_input_sections): Check if input section
must be reordered.
* output.h (Output_section::update_section_layout): New function.
* plugin.cc (get_section_count): New function.
(get_section_type): New function.
(get_section_name): New function.
(get_section_contents): New function.
(update_section_order): New function.
(allow_section_ordering): New function.
(Plugin::load): Add the new interfaces to the transfer vector.
(Plugin_manager::load_plugins): New parameter.
(Plugin_manager::all_symbols_read): New parameter.
(Plugin_manager::claim_file): New parameter. Save the elf object for
unclaimed objects.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::get_view): Change to directly use the bool to check
if get_view is called from claim_file_hook.
* plugin.h (input_objects): New function
(Plugin__manager::load_plugins): New parameter.
(Plugin_manager::claim_file): New parameter.
(Plugin_manager::get_elf_object): New function.
(Plugin_manager::in_claim_file_handler): New function.
(Plugin_manager::in_claim_file_handler_): New member.
(layout): New function.
* readsyms.cc (Read_symbols::do_read_symbols): Call the claim_file
handler with an extra parameter. Make the elf object before calling
claim_file handler.
* testsuite/plugin_test.c (get_section_count): New function pointer.
(get_section_type): New function pointer.
(get_section_name): New function pointer.
(get_section_contents): New function pointer.
(update_section_order): New function pointer.
(allow_section_ordering): New function pointer.
(onload): Check if the new interfaces exist.
* options.h (class General_options): Add
--ld-generated-unwind-info.
* ehframe.cc (Fde::write): Add address parameter. Change all
callers. If associated with PLT, fill in address and size.
(Cie::set_output_offset): Only add merge mapping if there is an
object.
(Cie::write): Add address parameter. Change all callers.
(Eh_frame::add_ehframe_for_plt): New function.
* ehframe.h (class Fde): Update declarations. Move shndx_ and
input_offset_ fields into union u_, with new plt field.
(Fde::Fde): Adjust for new union field.
(Fde::Fde) [Output_data version]: New constructor.
(Fde::add_mapping): Only add merge mapping if there is an object.
(class Cie): Update declarations.
(class Eh_frame): Declare add_ehframe_for_plt.
* layout.cc (Layout::layout_eh_frame): Break out code into
make_eh_frame_section, and call it.
(Layout::make_eh_frame_section): New function.
(Layout::add_eh_frame_for_plt): New function.
* layout.h (class Layout): Update declarations.
* merge.cc (Merge_map::add_mapping): Add assertion.
* i386.cc: Include "dwarf.h".
(class Output_data_plt_i386): Make first_plt_entry,
dyn_first_plt_entry, exec_plt_entry, and dyn_plt_entry const. Add
plt_eh_frame_cie_size, plt_eh_frame_fde_size, plt_eh_frame_cie,
and plt_eh_frame_fde.
(Output_data_plt_i386::Output_data_plt_i386): Align to 16-byte
boundary. Call add_eh_frame_for_plt if appropriate.
* x86_64.cc: Include "dwarf.h".
(class Output_data_plt_x86_64): Align to 16-byte boundary. Make
first_plt_entry, plt_entry and tlsdesc_plt_entry const. Add
plt_eh_frame_cie_size, plt_eh_frame_fde_size, plt_eh_frame_cie,
and plt_eh_frame_fde.
(Output_data_plt_x86_64::init): Call add_eh_frame_for_plt if
appropriate.
* layout.cc (Layout::segment_precedes): Don't crash if a linker
script create indistinguishable segments.
(Layout::set_segment_offsets): Use stable_sort when sorting
segments. Pass this to Compare_segments constructor.
* layout.h (class Layout): Make segment_precedes non-static.
(class Compare_segments): Change from struct to class. Add
layout_ field. Add constructor.
* script-sections.cc
(Script_sections::attach_sections_using_phdrs_clause): Rename
local orphan to is_orphan. Don't report failure to put empty
section in segment. On attachment failure, report name of
section, and attach to first PT_LOAD segment.
(ctors_sections_in_init_array): New static variable.
(Layout::is_ctors_in_init_array): New function.
(Layout::layout): Add entry to ctors_sections_in_init_array if
appropriate.
* layout.h (class Layout): Declare is_ctors_in_init_array.
* reloc.cc (Sized_relobj_file::do_relocate): Call reverse_words if
is_ctors_reverse_view is set.
(Sized_relobj_file::write_sections): Add layout parameter. Change
all callers. Set is_ctors_reverse_view field of View_size.
(Sized_relobj_file::reverse_words): New function.
* object.h (Sized_relobj_file::View_size): Add
is_ctors_reverse_view field.
(class Sized_relobj_file): Update declarations.
* testsuite/initpri3.c: New test.
* testsuite/Makefile.am: (check_PROGRAMS): Add initpri3a and
initpri3b.
(initpri3a_SOURCES, initpri3a_DEPENDENCIES): New variables.
(initpri3a_LDFLAGS, initpri3a_LDADD): New variables.
(initpri3b_SOURCES, initpri3b_DEPENDENCIES): New variables.
(initpri3b_LDFLAGS, initpri3b_LDADD): New variables.
* testsuite/Makefile.in: Rebuild.
* options.h (class General_options): Add --ctors-in-init-array.
* layout.cc (Layout::get_output_section): Treat SHT_INIT_ARRAY and
friends as SHT_PROGBITS for merging sections.
(Layout::layout): Remove special handling of .init_array and
friends. Don't sort if doing relocatable link. Sort for .ctors
and .dtors if ctors_in_init_array.
(Layout::make_output_section): Force correct section types for
.init_array and friends. Don't sort if doing relocatable link,
Don't sort .ctors and .dtors if ctors_in_init_array.
(Layout::section_name_mapping): Remove .ctors. and .dtorso.
(Layout::output_section_name): Add relobj parameter. Change all
callers. Handle .ctors. and .dtors. in code rather than table.
Handle .ctors and .dtors if ctors_in_init_array.
(Layout::match_file_name): New function, moved from output.cc.
* layout.h (class Layout): Update declarations.
* output.cc: Include "layout.h".
(Input_section_sort_entry::get_priority): New function.
(Input_section_sort_entry::match_file_name): Just call
Layout::match_file_name.
(Output_section::Input_section_sort_init_fini_compare::operator()):
Handle .ctors and .dtors. Sort by explicit priority rather than
by name.
* configure.ac: Remove CONSTRUCTOR_PRIORITY test and conditional.
* testsuite/initpri2.c: New test.
* testsuite/Makefile.am: Don't test CONSTRUCTOR_PRIORITY.
(check_PROGRAMS): Add initpri2.
(initpri2_SOURCES, initpri2_DEPENDENCIES): New variables.
(initpri2_LDFLAGS, initpri2_LDADD): New variables.
* configure, testsuite/Makefile.in: Rebuild.
* layout.h (class Layout): Add interp_segment_ field.
* layout.cc (Layout::Layout): Initialize interp_segment_ field.
(Layout::attach_allocated_section_to_segment): If making shared
library, put .interp section in PT_INTERP segment.
(Layout::finalize): Also call create_interp if -dynamic-linker
option was used.
(Layout::create_interp): Assert that there is no PT_INTERP
segment. If not using a SECTIONS clause, use make_output_section.
(Layout::make_output_segment): Set interp_segment_ if PT_INTERP.
* script-sections.cc
(Script_sections::create_note_and_tls_segments): If making shared
library, put .interp section in PT_INTERP segment.
info; adjust display of GOT entries.
* incremental.cc (Sized_incremental_binary::setup_readers): Allocate
vector of input objects; remove file_status_.
(Sized_incremental_binary::do_reserve_layout): Remove file_status_.
(Sized_incremental_binary::do_process_got_plt): Adjust calls to
got_plt reader; call target hooks to reserve GOT entries.
(Output_section_incremental_inputs::set_final_data_size): Adjust size
of input file info header and GOT info entry.
(Output_section_incremental_inputs::write_info_blocks): Write dynamic
relocation info.
(Got_plt_view_info::got_descriptor): Remove.
(Got_plt_view_info::sym_index): New data member.
(Got_plt_view_info::input_index): New data member.
(Local_got_offset_visitor::visit): Write input file index.
(Global_got_offset_visitor::visit): Write 0 for input file index.
(Global_symbol_visitor_got_plt::operator()): Replace got_descriptor
with sym_index and input_index.
(Output_section_incremental_inputs::write_got_plt): Adjust size of
incremental info GOT entry; replace got_descriptor with input_index.
(Sized_relobj_incr::Sized_relobj_incr): Adjust initializers; record
map from input file index to object.
(Sized_relobj_incr::do_layout): Replace direct data member reference
with accessor function.
(Sized_relobj_incr::do_for_all_local_got_entries): Move to base class.
* incremental.h (Incremental_input_entry_reader::get_symbol_offset):
Adjust size of input file info header.
(Incremental_input_entry_reader::get_first_dyn_reloc): New function.
(Incremental_input_entry_reader::get_dyn_reloc_count): New function.
(Incremental_input_entry_reader::get_input_section): Adjust size of
input file info header.
(Incremental_got_plt_reader::Incremental_got_plt_reader): Adjust size
of incremental info GOT entry.
(Incremental_got_plt_reader::get_got_desc): Remove.
(Incremental_got_plt_reader::get_got_symndx): New function.
(Incremental_got_plt_reader::get_got_input_index): New function.
(Sized_incremental_binary::Sized_incremental_binary): Remove
file_status_; add input_objects_.
(Sized_incremental_binary::~Sized_incremental_binary): Remove.
(Sized_incremental_binary::set_file_is_unchanged): Remove.
(Sized_incremental_binary::file_is_unchanged): Remove.
(Sized_incremental_binary::set_input_object): New function.
(Sized_incremental_binary::input_object): New function.
(Sized_incremental_binary::file_status_): Remove.
(Sized_incremental_binary::input_objects_): New data member.
(Sized_relobj_incr): Rename Sized_incr_relobj to this; adjust all
references.
(Sized_relobj_incr::invalid_address): Move to base class.
(Sized_relobj_incr::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_incr::do_output_section_offset): Likewise.
(Sized_relobj_incr::do_for_all_local_got_entries): Likewise.
(Sized_relobj_incr::section_offsets_): Likewise.
* object.cc (Sized_relobj::do_for_all_local_got_entries): New
function.
(Sized_relobj_file::Sized_relobj_file): Remove local_got_offsets_.
(Sized_relobj_file::layout_section): Replace refs to section_offsets_
with accessor function.
(Sized_relobj_file::do_layout): Likewise.
(Sized_relobj_file::do_layout_deferred_sections): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Move to base class.
(Sized_relobj_file::compute_final_local_value): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::do_finalize_local_symbols): Likewise.
* object.h (Relobj::Relobj): Initialize new data members.
(Relobj::add_dyn_reloc): New function.
(Relobj::first_dyn_reloc): New function.
(Relobj::dyn_reloc_count): New function.
(Relobj::first_dyn_reloc_): New data member.
(Relobj::dyn_reloc_count_): New data member.
(Sized_relobj): Rename Sized_relobj_base to this; adjust all
references.
(Sized_relobj::Address): New typedef.
(Sized_relobj::invalid_address): Move here from child class.
(Sized_relobj::Sized_relobj): Initialize new data members.
(Sized_relobj::sized_relobj): New function.
(Sized_relobj::is_output_section_offset_invalid): Move here from
child class.
(Sized_relobj::get_output_section_offset): Likewise.
(Sized_relobj::local_has_got_offset): Likewise.
(Sized_relobj::local_got_offset): Likewise.
(Sized_relobj::set_local_got_offset): Likewise.
(Sized_relobj::do_for_all_local_got_entries): Likewise.
(Sized_relobj::clear_got_offsets): New function.
(Sized_relobj::section_offsets): Move here from child class.
(Sized_relobj::do_output_section_offset): Likewise.
(Sized_relobj::do_set_section_offset): Likewise.
(Sized_relobj::Local_got_offsets): Likewise.
(Sized_relobj::local_got_offsets_): Likewise.
(Sized_relobj::section_offsets_): Likewise.
(Sized_relobj_file): Rename Sized_relobj to this; adjust all
references.
(Sized_relobj_file::is_output_section_offset_invalid): Move to base
class.
(Sized_relobj_file::sized_relobj): New function
(Sized_relobj_file::local_has_got_offset): Move to base class.
(Sized_relobj_file::local_got_offset): Likewise.
(Sized_relobj_file::set_local_got_offset): Likewise.
(Sized_relobj_file::get_output_section_offset): Likewise.
(Sized_relobj_file::do_for_all_local_got_entries): Likewise.
(Sized_relobj_file::do_output_section_offset): Likewise.
(Sized_relobj_file::do_set_section_offset): Likewise.
(Sized_relobj_file::Local_got_offsets): Likewise.
(Sized_relobj_file::local_got_offsets_): Likewise.
(Sized_relobj_file::section_offsets_): Likewise.
* output.cc (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors).
(set_needs_dynsym_index): Convert relobj to derived class pointer.
(Output_reloc::get_symbol_index): Likewise.
(Output_reloc::local_section_offset): Likewise.
(Output_reloc::get_address): Likewise.
(Output_reloc::symbol_value): Likewise.
(Output_data_got::reserve_slot): Move to class definition.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_slot_for_global): Remove.
(Output_data_got::reserve_global): New function.
* output.h (Output_reloc::Output_reloc): Adjust type of relobj
(all constructors, two instantiations).
(Output_reloc::get_relobj): New function (two instantiations).
(Output_reloc::u1_.relobj, Output_reloc::u2_.relobj): Adjust type.
(Output_data_reloc_base::add): Convert relobj to derived class pointer.
(Output_data_reloc::add_global): Adjust type of relobj.
(Output_data_reloc::add_global_relative): Likewise.
(Output_data_reloc::add_symbolless_global_addend): Likewise.
(Output_data_reloc::add_local): Likewise.
(Output_data_reloc::add_local_relative): Likewise.
(Output_data_reloc::add_symbolless_local_addend): Likewise.
(Output_data_reloc::add_local_section): Likewise.
(Output_data_reloc::add_output_section): Likewise.
(Output_data_reloc::add_absolute): Likewise.
(Output_data_reloc::add_target_specific): Likewise.
(Output_data_got::reserve_slot): Move definition here.
(Output_data_got::reserve_local): New function.
(Output_data_got::reserve_global): New function.
* reloc.cc (Sized_relobj_file::do_read_relocs): Replace refs to
section_offsets_ with accessor function.
(Sized_relobj_file::write_sections): Likewise.
(Sized_relobj_file::do_relocate_sections): Likewise.
* target.h (Sized_target::reserve_local_got_entry): New function.
(Sized_target::reserve_global_got_entry): New function.
* x86_64.cc (Target_x86_64::reserve_local_got_entry): New function.
(Target_x86_64::reserve_global_got_entry): New function.
(Target_x86_64::init_got_plt_for_update): Create rela_dyn section.
