bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
I find the following test fail when I test native aarch64 gdb with
arm program,
(gdb) PASS: gdb.base/attach-pie-noexec.exp: attach
set architecture arm^M
warning: Selected architecture arm is not compatible with reported target architecture aarch64^M
Architecture `arm' not recognized.^M
The target architecture is set automatically (currently aarch64)^M
(gdb) FAIL: gdb.base/attach-pie-noexec.exp: set architecture arm
GDB thinks the target is aarch64, but it isn't. Nowadays, we are
using some entries AT_PHENT and AT_HWCAP in auxv to determine whether
the process is a 32-bit arm one or 64-bit aarch64 one, and get the
right gdbarch. However, in the process of parsing auxv (in
inf_ptrace_auxv_parse), the size of int and data pointer of
target_gdbarch is used. If debug program exists (in most of cases),
target_gdbarch is already set according to the debug program, which
is arm in my case. Then, GDB can parse auxv successfully. However,
in gdb.base/attach-pie-noexec.exp, the debug program is removed,
target_gdbarch is aarch64 when GDB parse auxv, so GDB can't parse
it successfully.
Instead of using auxv, we check the return value of ptrace NT_ARM_VFP.
If the program is an arm process, NT_ARM_VFP is OK, otherwise, error
is returned.
Additionally, we only return tdesc_arm_with_neon for arm process,
because neon is mandatory on ARMv8.
gdb:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* aarch64-linux-nat.c (tdesc_arm_with_vfpv3): Remove the
declaration.
(aarch64_linux_read_description): Remove code on getting
auxv and select target description on it. Select target
description by the result of NT_ARM_VFP ptrace request.
When I run process-dies-while-detaching.exp with GDBserver, I see many
warnings printed by GDBserver,
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26183: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
ptrace(regsets_fetch_inferior_registers) PID=26184: No such process
regsets_fetch_inferior_registers is called when GDBserver resumes each
lwp.
#2 0x0000000000428260 in regsets_fetch_inferior_registers (regsets_info=0x4690d0 <aarch64_regsets_info>, regcache=0x31832020)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:5412
#3 0x00000000004070e8 in get_thread_regcache (thread=0x31832940, fetch=fetch@entry=1) at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/regcache.c:58
#4 0x0000000000429c40 in linux_resume_one_lwp_throw (info=<optimized out>, signal=0, step=0, lwp=0x31832830)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4463
#5 linux_resume_one_lwp (lwp=0x31832830, step=<optimized out>, signal=<optimized out>, info=<optimized out>)
at /home/yao/SourceCode/gnu/gdb/git/gdb/gdbserver/linux-low.c:4573
The is the case that threads are disappeared when GDB/GDBserver resumes
them. We check errno for ESRCH, and don't print error messages, like
what we are doing in regsets_store_inferior_registers.
gdb/gdbserver:
2016-08-04 Yao Qi <yao.qi@linaro.org>
* linux-low.c (regsets_fetch_inferior_registers): Check
errno is ESRCH or not.
PR python/18565 notes that calling frame filters don't work properly for
inlined functions. This happens because Frame.function on an inline
frame will yield the wrong result. This patch changes this code to use
find_frame_funname instead, which handles inline frames properly.
Built and regtested on x86-64 Fedora 24.
2016-08-03 Tom Tromey <tom@tromey.com>
PR python/18565:
* python/py-frame.c (frapy_function): Use find_frame_funname.
2016-08-03 Tom Tromey <tom@tromey.com>
PR python/18565:
* gdb.python/py-frame-inline.exp: Add Frame.function test.
The PR 18565 thread pointed out that, if cp_remove_params can throw
(we aren't quite sure), then find_frame_funname could leak some
memory. This patch avoids any potential issue by rearranging some
code in find_frame_funname.
Built and regtested on x86-64 Fedora 24.
2016-08-03 Tom Tromey <tom@tromey.com>
* stack.c (find_frame_funname): Avoid any possible leak in case
cp_remove_params can throw.
An earlier patch added three new breakpoint-related events to the
Python API. However, at that time, I forgot to update NEWS. This
patch supplies the missing entry.
2016-08-03 Tom Tromey <tom@tromey.com>
* NEWS: Mention new Python breakpoint events.
A while ago, Pedro announced that I would be the Rust maintainer for
gdb. However, I neglected to update the MAINTAINERS file until now.
2016-08-02 Tom Tromey <tom@tromey.com>
* MAINTAINERS (Core): Add self as Rust maintainer.
As a result of this commit,
9b4c5f878f
(Remove support for thread events without PTRACE_EVENT_CLONE in GDBServer.)
the last usage of td_ta_event_addr td_ta_set_event and
td_ta_event_getmsg were removed. They are no longer used. This patch
is to remove them.
gdb/gdbserver:
2016-08-02 Yao Qi <yao.qi@linaro.org>
* thread-db.c (struct thread_db) <td_ta_event_getmsg_p>: Remove.
<td_ta_set_event_p, td_ta_event_addr_p>: Remove.
(thread_db_load_search): Update.
(try_thread_db_load_1): Don't look for td_ta_event_addr,
td_ta_set_event and td_ta_event_getmsg.
include * libiberty.h (MAX_ALLOCA_SIZE): New macro.
libiberty * make-relative-prefix.c (make_relative_prefix_1): Fall back to
malloc if alloca argument is greater than MAX_ALLOCA_SIZE.
* cp-demangle.c (cplus_demangle_operators): Add f[lrLR].
(d_expression_1): Handle them.
(d_maybe_print_fold_expression): New.
(d_print_comp_inner): Use it.
(d_index_template_argument): Handle negative index.
* cp-demangle.c (cplus_demangle_operators): Add sP and sZ.
(d_print_comp_inner): Handle them.
(d_template_args_1): Split out from d_template_args.
(d_args_length): New.
PR c++/70926
* cplus-dem.c: Handle large values and overflow when demangling
length variables.
(demangle_template_value_parm): Read only until end of mangled string.
(do_hpacc_template_literal): Likewise.
(do_type): Handle overflow when demangling array indices.
* cp-demangle.c (cplus_demangle_print_callback): Avoid zero-length
VLAs.
PR c++/70498
* cp-demangle.c (d_expression_1): Formatting fix.
* cplus-dem.c (enum type_kind_t): Add tk_rvalue_reference
constant.
(demangle_template_value_parm): Handle tk_rvalue_reference
type kind.
(do_type): Support 'O' type id (rvalue references).
* testsuite/demangle-expected: Add tests.
PR c++/70498
* cp-demangle.c: Parse numbers as integer instead of long to avoid
overflow after sanity checks. Include <limits.h> if available.
(INT_MAX): Define if necessary.
(d_make_template_param): Takes integer argument instead of long.
(d_make_function_param): Likewise.
(d_append_num): Likewise.
(d_identifier): Likewise.
(d_number): Parse as and return integer.
(d_compact_number): Handle overflow.
(d_source_name): Change variable type to integer for parsed number.
(d_java_resource): Likewise.
(d_special_name): Likewise.
(d_discriminator): Likewise.
(d_unnamed_type): Likewise.
* testsuite/demangle-expected: Add regression test cases.
* configure: Remove SH5 support.
PR c++/69687
* cplus-dem.c: Include <limits.h> if available.
(INT_MAX): Define if necessary.
(remember_type, remember_Ktype, register_Btype, string_need):
Abort if we detect cases where we the size of the allocation would
overflow.
PR c++/70492
* cplus-dem.c (gnu_special): Handle case where consume_count returns
-1.
PR c++/67394
PR c++/70481
* cplus-dem.c (squangle_mop_up): Zero bsize/ksize after freeing
btypevec/ktypevec.
* testsuite/demangle-expected: Add coverage tests.
Now that the GDB 7.12 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 7.12 branch created (41bfcd638a):
* version.in: Bump version to 7.12.50.DATE-git.
"single-process" and "multi-process" are used in the test message of
process-dies-while-detaching.exp, but they are misplaced due to
set mode [expr {$multi_process ? "single-process" : "multi-process"}]
This patch is to swap them.
gdb/testsuite:
2016-08-01 Yao Qi <yao.qi@linaro.org>
* gdb.threads/process-dies-while-detaching.exp (do_test): Set
variable mode to "multi-process" if $multi_process is 1, otherwise
set it to "single-process".
There are some gdb.cp/ tests fails if the program is compiled for arm
32-bit but GDB/GDBserver is aarch64 64-bit program, because target triplet
doesn't match "arm*-*-*". Instead, we can use is_aarch32_target.
gdb/testsuite:
2016-08-01 Yao Qi <yao.qi@linaro.org>
* gdb.cp/anon-struct.exp: Check is_aarch32_target.
* gdb.cp/cpexprs.exp: Likewise.
* gdb.cp/m-static.exp: Likewise.
Many of the existing sparc tests fail in non-ELF targets (coff and
a.out) due to spurious differences in the expected results:
- Unlike ELF, a.out text sections are aligned to 2**3 and padded
accordingly. The padding instruction is a `nop' (01 00 00 00).
- Likewise, coff text sections are also aligned to 2**3 and padded
accordingly. However, the padding instruction in these targets is an
`illtrap 0' (00 00 00 00).
- Unlike ELF, a.out and coff binaries don't contain hardware
capabilities bits that could be used by BFD to determine the opcodes
architecture corresponding to the instructions encoded in the
objects (v9, v9a, v9b, v9c, etc). Consequently, in both a.out and
coff tests we would need to pass proper `-m sparc:vXXX' options when
invoking objdump before comparing results.
In order to fix these issues, the most obvious solution would be to have
three variants of .d files per impacted test. For example, for save.d
we would have: save-elf.d, save-aout.d and save-coff.d. Using the
`#source' directive, a single save.s file would provide the input for
all of them. However, this approach has the following problems:
- The #target and #notarget .d directives are very limited: they use
globs instead of regular expressions, and thus it is not possible (or
too messy) to use them to discriminate between elf, coff and a.out
sparc targets.
- It adds little or no value to have variants of all these tests for all
the target types, and it would be a burden to maintain them. Actually
the features tested in the spuriously failing tests (relatively modern
sparc instructions, registers and asis) are not really found in
running coff or a.out sparc systems.
This patch changes sparc.exp so it will run these tests only in
ELF-targets, using the more standard `is_elf_format' from
binutils-common.exp instead of the ad-hoc (and less convenient, as it
must be called before _every_ single elf-only test) sparc_elf_setup.
Incidentally, the patch also fixes the #name entry for save-args.d.
Tested in sparc*-*-linux-gnu, sparc-aout and sparc-coff targets.
gas/ChangeLog:
2016-07-27 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/sparc.exp: Use is_elf_format to discriminate
ELF targets.
Run natural, natural-32, pr4587, ticc-imm-reg, v8-movwr-imm,
pause, save-args, cbcond, cfr, crypto edge, flush, hpcvis3, ima,
ld_st_fsr, ldtw_sttw, ldd_std, ldx_stx, ldx_efsr, mwait, mcdper,
sparc5vis4, xcrypto, v9branch1 and imm-plus-rreg only in ELF
targets.
(sparc_elf_setup): Delete.
* testsuite/gas/sparc/save-args.d: Fix a copy-paste typo in the
test's #name entry.
PR binutils/17512
* rescoff.c (read_coff_res_dir): Fix detection of buffer overrun.
* resbin.c (bin_to_res_version): Allow for the padded length of a
version block to be longer than the recorded length. Skip padding
bytes.
Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.
Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous. This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has. Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.
Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form. For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction. A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.
Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well. We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded. Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.
For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.
gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.
opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
The major reason this header was needed, bfd_default_set_arch_mach,
has now moved to bfd.h.
gdb/
* amd64-darwin-tdep.c: Don't include libbfd.h.
* i386-darwin-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* rs6000-tdep.c: Likewise.
sim/aarch64/
* memory.c: Don't include libbfd.h.
sim/rl78/
* load.c: Don't include libbfd.h.
(rl78_load): Don't use private iovec seek or read.
sim/rx/
* load.c: Don't include libbfd.h.
(rx_load): Don't use private iovec seek or read.
Debugging an x32 process with an x32 gdbserver always results in:
(gdb) c
Continuing.
Program received signal SIGSEGV, Segmentation fault.
0xf7de9600 in _dl_debug_state () from target:/libx32/ld-linux-x32.so.2
(gdb)
Looking at the remote debug logs reveals the problem, here:
Packet received: T05swbreak:;06:a0d4ffff00000000;07:b8d3ffff00000000;10:0096def701000000;thread:p7d7a.7d7a;core:1;
^^^^^^^^^^^^^^^^
The underlined value is the expedited value of RIP (in little endian).
But notice that 01 in 0x01f7de9600, while gdb says the program stopped
at 0xf7de9600. 0x01ffffffff is over 32 bits, which indicates that
something wen't wrong somewhere in gdbserver.
The problem turns out to be in gdbserver's x86_get_pc / x86_set_pc
routines, where "unsigned long" is used assuming that it can fit a
64-bit value, while unsigned long is actually 32-bit on x32. The
result is that collect_register_by_name / supply_register_by_name end
up reading/writing random bytes off the stack.
Fix this by using explicit uint64_t instead of unsigned long.
For consistency, use uint32_t instead of unsigned int in the 32-bit
paths.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
PR server/20414
* linux-x86-low.c (x86_get_pc, x86_set_pc): Use uint64_t instead
of unsigned long for 64-bit registers and use uint32_t instead of
unsigned int for 32-bit registers.
PR python/20190 arose from an exception I noticed when trying to use
the Python unwinder for Spider Monkey in Firefox.
The problem is that the unwinder wants to examine the value of a
thread-local variable. However, sympy_value rejects this because
symbol_read_needs_frame returns true for a TLS variable.
This problem arose once before, though in a different context:
https://sourceware.org/bugzilla/show_bug.cgi?id=11803
At the time Pedro and Daniel pointed out a simpler way to fix that bug
(see links in 20190 if you are interested); but for this new bug I
couldn't think of a similar fix and ended up implementing Daniel's
other suggestion:
https://sourceware.org/ml/gdb-patches/2010-07/msg00393.html
That is, this patch makes it possible to detect whether a symbol needs
a specific frame, or whether it just needs the inferior to have
registers.
Built and regtested on x86-64 Fedora 24.
2016-07-26 Tom Tromey <tom@tromey.com>
* symtab.c (register_symbol_computed_impl): Update.
PR python/20190:
* value.h (symbol_read_needs): Declare.
(symbol_read_needs_frame): Add comment.
* symtab.h (struct symbol_computed_ops) <read_variable>: Update
comment.
<get_symbol_read_needs>: Rename. Change return type.
* findvar.c (symbol_read_needs): New function.
(symbol_read_needs_frame): Rewrite.
(default_read_var_value): Use symbol_read_needs.
* dwarf2loc.c (struct symbol_needs_baton): Rename.
<needs>: Renamed from needs_frame. Changed type.
(needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call): Rename.
(needs_dwarf_reg_entry_value): Update.
(symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
Rename and update.
(locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum symbol_needs_kind): New.
2016-07-26 Tom Tromey <tom@tromey.com>
PR python/20190:
* gdb.threads/tls.exp (check_thread_local): Add python symbol
test.
Complement:
commit 1bbce13264
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Jun 24 23:55:46 2013 +0000
<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.
ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
An x32 gdb always issues this warning:
(gdb) start
Temporary breakpoint 1 at 0x4043e9: file foo.c, line 25.
Starting program: a.out
warning: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER: Input/output error
Temporary breakpoint 1, main (argc=1, argv=0xffffd544) at foo.c:25
25 {
(gdb)
As described in Linux commit 55283e253771 (x32: Add ptrace for x32):
[...] PTRACE_PEEKUSR and PTRACE_POKEUSR are only allowed to access
segment and debug registers. [...]
The fix is to use PTRACE_GETREGS instead.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* nat/linux-ptrace.c: Include "gregset.h".
(linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
PTRACE_PEEKUSER.
Building an x32 gdb trips on a static assertion:
In file included from .../src/gdb/common/common-defs.h:71:0,
from .../src/gdb/nat/amd64-linux-siginfo.c:21:
.../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
^
.../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
^
The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.
Several bits of nat_siginfo_t are off:
- nat_siginfo_t's _pad field's definition is:
int _pad[((128 / sizeof (int)) - 4)];
while /usr/include/bits/siginfo.h has:
# define __SI_MAX_SIZE 128
# if __WORDSIZE == 64
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 4)
# else
# define __SI_PAD_SIZE ((__SI_MAX_SIZE / sizeof (int)) - 3)
# endif
and __WORDSIZE == 32 for x32. This is what causes the size of
nat_siginfo_t to be wrong and the assertion to fail.
- the nat_clock_t type is incorrect for 64-bit. We have this:
/* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes. */
typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;
however, /usr/include/bits/siginfo.h has:
# if defined __x86_64__ && __WORDSIZE == 32
/* si_utime and si_stime must be 4 byte aligned for x32 to match the
kernel. We align siginfo_t to 8 bytes so that si_utime and si_stime
are actually aligned to 8 bytes since their offsets are multiple of
8 bytes. */
typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
# define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
# else
typedef __clock_t __sigchld_clock_t;
# define __SI_ALIGNMENT
# endif
So we're currently forcing 4-byte alignment on clock_t, when it
should only be so for x32, not 64-bit.
The fix:
- Leaves nat_siginfo_t strictly for the 64-bit ABI.
- Adds a new typedef for the siginfo type that ptrace uses
(ptrace_siginfo_t). An x32 gdb always gets/sets an x32 siginfo_t
type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.
- Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
intermediate conversion type.
gdb/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'. Remove static assertions.
(top level): New static assertions.
gdb/gdbserver/ChangeLog:
2016-07-26 Pedro Alves <palves@redhat.com>
* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.
ld * ldbuildid.c: Changes for MinGW32:
Include windows.h and rpcdce.h.
(validate_build_id_style): Allow "uuid" style.
(generate_build_id): Fill in id_bits using UuidCreate().
This CL implemented the following relocs for AArch64 target.
- R_AARCH64_MOVW_UABS_G*
- R_AARCH64_MOVW_SABS_G* relocations
gold/ChangeLog
2016-07-26 Igor Kudrin <ikudrin@accesssoftek.com>
* aarch64-reloc-property.cc (Rvalue_bit_select_impl): New class.
(rvalue_bit_select): Use Rvalue_bit_select_impl.
* aarch64-reloc.def (MOVW_UABS_G0, MOVW_UABS_G0_NC,
MOVW_UABS_G1,
MOVW_UABS_G1_NC, MOVW_UABS_G2, MOVW_UABS_G2_NC, MOVW_UABS_G3,
MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2): New relocations.
* aarch64.cc (Target_aarch64::Scan::local): Add cases for new
MOVW_UABS_* and MOVW_SABS_* relocations.
(Target_aarch64::Scan::global): Likewise.
(Target_aarch64::Relocate::relocate): Add cases and handlings
for new MOVW_UABS_* and MOVW_SABS_* relocations.
* testsuite/Makefile.am (aarch64_relocs): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/aarch64_globals.s: New test source file.
* testsuite/aarch64_relocs.s: Likewise.
* testsuite/aarch64_relocs.sh: New test script.
Some btrace tests use assembly source files. They use the target triplet to
distinguish between x86_64 and ia32 ISA. This does not work for -m32 tests
without setting the target triplet to i686-?-?.
Instead use is_amd64_regs_target to distinguish between x86_64 and ia32 ISA.
See also https://sourceware.org/ml/gdb-patches/2016-07/msg00256.html.
testsuite/
* gdb.btrace/record_goto.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/stepi.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall-only.exp: Use is_amd64_regs_target for selecting
assembly source files.
When a bad interpreter name is passed to new-ui, such as:
(gdb) new-ui bloop /dev/pts/10
A partially created UI is left in the UI list, with interp set to NULL.
Trying to do anything that will print on this UI (such as "start") will
cause a segmentation fault.
Changes in v2:
- Use with_test_prefix to namespace test procedures
- Give an explicit stable test name
- Add a "bad terminal path" test
- Remove useless runto_main
- Add missing intro comments
I did not factor out the pty spawn, as there is some magic involved I
don't quite understand. But it wouldn't bring that much anyway.
gdb/ChangeLog:
* top.h (make_delete_ui_cleanup): New declaration.
* top.c (delete_ui_cleanup): New function.
(make_delete_ui_cleanup): New function.
(new_ui_command): Create restore_ui cleanup earlier, create a
delete_ui cleanup and discard it on success.
gdb/testsuite/ChangeLog:
* gdb.base/new-ui.exp (do_test_invalid_args): New
procedure.
Since Linux 2.6.33, /proc/PID/status shows "t (tracing stop)", with
lowercase 't'. Because GDB is only expecting "T (tracing stop)", GDB
can incorrectly suppress errors in check_ptrace_stopped_lwp_gone:
1578 if (!check_ptrace_stopped_lwp_gone (lp))
1579 throw_exception (ex);
Ref: https://sourceware.org/ml/gdb-patches/2016-06/msg00072.html
2016-07-25 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
't'.
Parse the process's /proc/PID/status state into an enum instead of the
current scheme of passing state strings around.
gdb/ChangeLog:
2016-07-25 Pedro Alves <palves@redhat.com>
* nat/linux-procfs.c (enum proc_state): New enum.
(parse_proc_status_state): New function.
(linux_proc_pid_get_state): Replace output string buffer parameter
with an output proc_state parameter. Use parse_proc_status_state.
(linux_proc_pid_is_gone): Adjust to use proc_state values.
(linux_proc_pid_has_state): Change type of 'state' parameter; now
an enum proc_state. Adjust to linux_proc_pid_get_state interface
change.
(linux_proc_pid_is_stopped)
(linux_proc_pid_is_trace_stopped_nowarn)
(linux_proc_pid_is_zombie_maybe_warn): Adjust to
linux_proc_pid_get_state interface change.
