Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
Clean up problems with targets and hosts that have 64 bit longs
and pointers and 32 bit ints.
* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
Change all printf formats from %x to %lx if outputting an address.
Change la_*_format to use long format.
local_hex_string, local_hex_string_custom now take an unsigned long
argument, change all callers.
* coffread.c (read_coff_symtab): Remove superfluous cast for
complaint output.
* dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int.
* findvar.c, value.h (write_register): Change register value to long.
* gdbtypes.h (struct type): Change `bitsize' to long as
TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
* inferior.h (struct inferior_status): Change type of stop_pc to
CORE_ADDR.
* language.h (local_octal_string, local_octal_string_custom):
Remove prototype, the functions are neither defined nor used.
* mipsread.c (parse_symbol): Use temporary variable for bitsize as
f->bitsize is a long now.
* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
Use unsigned long casts instead of int for abusing sections_end
pointer as integer.
* stack.c (parse_frame_specification): Change type of `args' to
CORE_ADDR for SETUP_ARBITRARY_FRAME.
* printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE.
* mipsread.c (parse_type): Alpha cc now supports the t->continued
bit, update algorithm to match the way the compiler uses it.
(TARDIRS): Add gdbserver.
* exec.c (print_section_info): Print entry point.
* i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
i386lynx-tdep.c. Add core file support.
* i386lynx-tdep.c: New module for Lynx/386 target dependant code.
* maint.c: Add `maint info sections' command to print info about all
sections that BFD knows about for exec and core files.
* sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
before putting frame on the stack. Consolidate writes to reduce
traffic for remote debugging.
* config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
* config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
* config/i386/nm-i386lynx.h: Add target_pid_to_str().
* config/i386/tm-i386lynx.h: Remove target_pid_to_str().
* sparclite/Makefile.in: Add deps to keep Sun make happy.
(OBS): Put version.o first, so Makefile rebuild happens early.
* command.h: Publicize prototype for not_just_help_class_command.
* command.c: Remove proto.
* maint.c: Mark "mt" as an abbrev, to avoid duplicated help
output. Move "maint info" from class info to class maintenance,
and improve text.
* infrun.c: Move "stop" to class_obscure, and give it a
function so it will not be seen as a global help topic. FIXME,
it should be possible to set these attributes independently.
* core.c (core_command): Make nicer error message for no core support.
* gdbcmd.h (maintenanceprintlist): Add declaration.
* main.c (maintenanceprintlist): Add definition.
* main.c (gdb_completer_command_word_break_characters): Add.
* main.c (symbol_completion_function): Switch completer word
break character sets dynamically, based on whether completion is
being done on commands or on something else.
* main.c (initialize_cmd_lists): Init maintenanceprintlist.
* maint.c: Include demangle.h.
* maint.c (maintenance_demangle): New function.
* maint.c (maintenance_print_command): New function.
* maint.c (_initialize_maint_cmds): Reorganize some commands
under new maintenance print subcommand.
* Makefile.in (SFILES_MAINDIR): Add new file maint.c.
* Makefile.in (OBS): Add new file maint.o.
* defs.h (command_class): Add class_maintenance.
* defs.h (MAINTENANCE_CMDS): Default to including maintenance
commands. Allow for them (and other nonessential parts of gdb)
to be selectively left out under special circumstances.
* gdbtypes.c (recursive_dump_type): New function; supports
maintenance print-type command.
* gdbtypes.h (recursive_dump_type, maintenance_print_type):
Add prototypes.
* main.c (maintenancelist, maintenanceinfolist): Add maintenance
command lists.
* main.c (initialize_cmd_lists): Eliminate unnecessary casts on
initializers. Add initializations for setprintlist, showprintlist,
setchecklist, showchecklist, maintenancelist, and maintenanceinfolist.
* printcmd.c (maintenance_print_type): New maintenance cmd.
* valprint.c (setprintlist, showprintlist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c.
* infcmd.c (unsetlist): Move to main.c, as implied by comment
that all cmd lists are owned by main.c.
* language.c (setchecklist, showchecklist): Move to main.c, as
implied by comment that all cmd lists are owned by main.c
* breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist,
deletelist): Remove redundant declarations (also in gdbcmd.h).
* symmisc.c (printsyms_command): Now maintenance_print_symbols.
* symmisc.c (printmsyms_command): Now maintenance_print_msymbols.
* symmisc.c (printpsyms_command): Now maintenance_print_psymbols.
* symmisc.c (printobjfiles_command): Now maintenance_print_objfiles.
* symtab.h (maintenance_print_symbols, maintenance_print_psymbols,
maintenance_print_msymbols, maintenance_print_objfiles):
Add prototypes.
* symmisc.c (printsyms_command, printpsyms_command,
printmsyms_command, printobjfiles_command): Removed from
_initialize_symmisc.
* main.c (dump_me_command): Moved to maint.c and renamed to
maintenance_dump_me.
* breakpoint.c (all_breakpoints_info): Rename to
maintenance_info_breakpoints.
* breakpoint.c (_initialize_breakpoint): Convert add_info of
all_breakpoints_info to add maintenance_info_breakpoints to the
maintenanceinfolist instead.
main.c (initialize_main): Set up maintenance class commands.
