The last section in a CTF dict is the string table, at an offset
represented by the cth_stroff header field. Its length is recorded in
the next field, cth_strlen, and the two added together are taken as the
size of the CTF dict. Upon opening a dict, we check that none of the
header offsets exceed this size, and we check when uncompressing a
compressed dict that the result of the uncompression is the same length:
but CTF dicts need not be compressed, and short ones are not.
Uncompressed dicts just use the ctf_size without checking it. This
field is thankfully almost unused: it is mostly used when reserializing
a dict, which can't be done to dicts read off disk since they're
read-only.
However, when opening an uncompressed foreign-endian dict we have to
copy it out of the mmaped region it is stored in so we can endian-
swap it, and we use ctf_size when doing that. When the cth_strlen is
corrupt, this can overrun.
Fix this by checking the ctf_size in all uncompressed cases, just as we
already do in the compressed case. Add a new test.
This came to light because various corrupted-CTF raw-asm tests had an
incorrect cth_strlen: fix all of them so they produce the expected
error again.
libctf/
PR libctf/28933
* ctf-open.c (ctf_bufopen_internal): Always check uncompressed
CTF dict sizes against the section size in case the cth_strlen is
corrupt.
ld/
PR libctf/28933
* testsuite/ld-ctf/diag-strlen-invalid.*: New test,
derived from diag-cttname-invalid.s.
* testsuite/ld-ctf/diag-cttname-invalid.s: Fix incorrect cth_strlen.
* testsuite/ld-ctf/diag-cttname-null.s: Likewise.
* testsuite/ld-ctf/diag-cuname.s: Likewise.
* testsuite/ld-ctf/diag-parlabel.s: Likewise.
* testsuite/ld-ctf/diag-parname.s: Likewise.
The CTF variable section is an optional (usually-not-present) section in
the CTF dict which contains name -> type mappings corresponding to data
symbols that are present in the linker input but not in the output
symbol table: the idea is that programs that use their own symbol-
resolution mechanisms can use this section to look up the types of
symbols they have found using their own mechanism.
Because these removed symbols (mostly static variables, functions, etc)
all have names that are unlikely to appear in the ELF symtab and because
very few programs have their own symbol-resolution mechanisms, a special
linker flag (--ctf-variables) is needed to emit this section.
Historically, we emitted only removed data symbols into the variable
section. This seemed to make sense at the time, but in hindsight it
really doesn't: functions are symbols too, and a C program can look them
up just like any other type. So extend the variable section so that it
contains all static function symbols too (if it is emitted at all), with
types of kind CTF_K_FUNCTION.
This is a little fiddly. We relied on compiler assistance for data
symbols: the compiler simply emits all data symbols twice, once into the
symtypetab as an indexed symbol and once into the variable section.
Rather than wait for a suitably adjusted compiler that does the same for
function symbols, we can pluck unreported function symbols out of the
symtab and add them to the variable section ourselves. While we're at
it, we do the same with data symbols: this is redundant right now
because the compiler does it, but it costs very little time and lets the
compiler drop this kludge and save a little space in .o files.
include/
* ctf.h: Mention the new things we can see in the variable
section.
ld/
* testsuite/ld-ctf/data-func-conflicted-vars.d: New test.
libctf/
* ctf-link.c (ctf_link_deduplicating_variables): Duplicate
symbols into the variable section too.
* ctf-serialize.c (symtypetab_delete_nonstatic_vars): Rename
to...
(symtypetab_delete_nonstatics): ... this. Check the funchash
when pruning redundant variables.
(ctf_symtypetab_sect_sizes): Adjust accordingly.
* NEWS: Describe this change.
The test for -gctf support in the compiler is used to determine when to
run the ld-ctf tests and most of those in libctf. Unfortunately,
because it uses check_compiler_available and compile_one_cc, it will
fail whenever the compiler emits anything on stderr, even if it
actually does support CTF perfectly well.
So, instead, ask the compiler to emit assembler output and grep it for
references to ".ctf": this is highly unlikely to be present if the
compiler does not support CTF. (This will need adjusting when CTF grows
support for non-ELF platforms that don't dot-prepend their section
names, but right now the linker doesn't link CTF on any such platforms
in any case.)
With this in place we can do things like run all the libctf tests under
leak sanitizers etc even if those spray warnings on simple CTF
compilations, rather than being blocked from doing so just when we would
most like to.
ld/
* testsuite/lib/ld-lib.exp (check_ctf_available): detect CTF
even if a CTF-capable compiler emits warnings.
ld/testsuite/ld-loongarch-elf
* ld-loongarch-elf.exp: Test LoongArch32 and LoongArch64 testcases respectively.
* jmp_op.d: Fix bug in test LoongArch32.
* disas-jirl-32.d: New test case for LoongArch32.
* disas-jirl-32.s: New test case for LoongArch32.
* disas-jirl.d: Skip test case LoongArch32.
* macro_op_32.d: New test case for LoongArch32.
* macro_op_32.s: New test case for LoongArch32.
* macro_op.d: Skip test case LoongArch32.
The extended instructions implemented in powerpc_macros aren't used by
the disassembler. That means instructions like "sldi r3,r3,2" appear
in disassembly as "rldicr r3,r3,2,61", which is annoying since many
other extended instructions are shown.
Note that some of the instructions moved out of the macro table to the
opcode table won't appear in disassembly, because they are aliases
rather than a subset of the underlying raw instruction. If enabled,
rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
occurrences in the case of clrlsldi if n <= b was added to the extract
functions.)
The patch also fixes a small bug in opcode sanity checking.
include/
* opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
opcodes/
* ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
(insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
(insert_sldn, extract_sldn, insert_srdn, extract_srdn),
(insert_erdb, extract_erdb, insert_csldn, extract_csldb),
(insert_irdb, extract_irdn): New functions.
(ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
Define and add associated powerpc_operands entries.
(powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
"sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
(ie. dot suffix) forms.
(powerpc_macros): Delete same from here.
gas/
* config/tc-ppc.c (insn_validate): Don't modify value passed
to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
Handle PPC_OPSHIFT_SH6.
* testsuite/gas/ppc/prefix-reloc.d: Update.
* testsuite/gas/ppc/simpshft.d: Update.
ld/
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/notoc.d: Update.
* testsuite/ld-powerpc/notoc3.d: Update.
* testsuite/ld-powerpc/tlsdesc2.d: Update.
* testsuite/ld-powerpc/tlsget.d: Update.
* testsuite/ld-powerpc/tlsget2.d: Update.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt6.d: Update.
Don't change indirect symbol defined in IR to undefined if it is
referenced from shared object.
bfd/
PR ld/28879
* elflink.c (_bfd_elf_merge_symbol): Don't change indirect
symbol defined in IR to undefined if it is referenced from
shared object.
ld/
PR ld/28879
* testsuite/ld-plugin/lto.exp: Run PR ld/28879 tests.
* testsuite/ld-plugin/pr28879a.cc: New file.
* testsuite/ld-plugin/pr28879b.cc: Likewise.
x86 treats MAXPAGESIZE as a memory optimisation parameter, actual
hardware paging is always COMMPAGESIZE of 4k. Use COMMONPAGESIZE for
the end of the relro segment alignment.
The previous patch regresses pr18176, increasing the testcase file
size from 322208 to 2099872 bytes. Fixing this on x86 will require
introducing a gap after the end of the relro segment (of up to
relropagesize-1 bytes).
PR 28824
PR 18176
* ld.h (ld_config_type): Add relro_use_commonpagesize field.
* ldexp.c (fold_segment_align): Set relropagesize depending on
relro_use_commonpagesize.
* emultempl/elf-x86.em (elf_x86_create_output_section_statements):
Set relro_use_commonpagesize.
* testsuite/ld-x86-64/pr18176.d: xfail.
I am checking this into master and will backport it to 2.38 branch.
H.J
----
On x86, GCC 12 supports -mno-direct-extern-access to enable canonical
reference to protected function and disable copy relocation. With
-mno-direct-extern-access, the canonical protected function symbols must
be accessed via canonical reference and the protected data symbols in
shared libraries are non-copyable. Under glibc 2.35, non-canonical
reference to the canonical protected function will get the run-time error:
./y: internal_f: ./libfoo.so: non-canonical reference to canonical protected function
and copy relocations against the non-copyable protected symbols will get
the run-time error:
./x: internal_i: ./libfoo.so: copy relocation against non-copyable protected symbol
Update x86 linker to disallow non-canonical reference to the canonical
protected function:
ld: plt.o: non-canonical reference to canonical protected function `internal_f' in libfoo.so
ld: failed to set dynamic section sizes: bad value
and copy relocation against the non-copyable protected symbol:
ld: main.o: copy relocation against non-copyable protected symbol `internal_i' in libfoo.so
at link-time.
bfd/
PR ld/28875
* elf-properties.c (_bfd_elf_parse_gnu_properties): Don't skip
shared libraries for GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
* elf32-i386.c (elf_i386_scan_relocs): Disallow non-canonical
reference to canonical protected function.
* elf64-x86-64.c (elf_x86_64_scan_relocs): Likewise.
* elfxx-x86.c (elf_x86_allocate_dynrelocs): Don't allow copy
relocation against non-copyable protected symbol.
ld/
PR ld/28875
* testsuite/ld-i386/i386.exp: Check non-canonical reference to
canonical protected function and check copy relocation against
non-copyable protected symbol.
* testsuite/ld-i386/pr21997-1.err: New file.
* testsuite/ld-i386/pr28875.err: Likewise.
* testsuite/ld-i386/pr28875a.c: Likewise.
* testsuite/ld-i386/pr28875b.c: Likewise.
* testsuite/ld-x86-64/pr21997-1a.err: Updated.
* testsuite/ld-x86-64/pr21997-1b.err: Likewise.
* testsuite/ld-x86-64/pr28875-data.err: New file.
* testsuite/ld-x86-64/pr28875-func.err: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Check non-canonical reference
to canonical protected function and check copy relocation against
non-copyable protected symbol.
The extension version checking logic is really just too complicated to
encode into the linker, trying to do so causes more harm than good.
This removes the checks and the associated tests, leaving the logic to
keep the largest version of each extension linked into the target.
bfd/
* elfnn-riscv.c (riscv_version_mismatch): Rename to
riscv_update_subset_version, and stop reporting warnings on
version mismatches.
(riscv_merge_std_ext): Adjust calls to riscv_version_mismatch.
(riscv_merge_multi_letter_ext): Likewise.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01.d: Remove
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01a.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-01b.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02a.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02b.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02c.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02d.s: Likewise
* testsuite/ld-riscv-elf/attr-merge-user-ext-01.d: New test.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p0.s:
Likewise.
* testsuite/ld-riscv-elf/attr-merge-user-ext-rv32i21_m2p1.s:
Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Remove obselete
attr-merge-arch-failed-{01,02}, replace with
attr-merge-user-ext-01.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
GOT32 relocations are allowed since absolute value + addend is stored in
the GOT slot.
Tested on glibc 2.35 build with GCC 11.2 and -Os.
bfd/
PR ld/28870
* elfxx-x86.c (_bfd_elf_x86_valid_reloc_p): Also allow GOT32
relocations.
ld/
PR ld/28870
* testsuite/ld-i386/i386.exp: Run pr28870.
* testsuite/ld-i386/pr28870.d: New file.
* testsuite/ld-i386/pr28870.s: Likewise.
This testcase triggers a stub sizing error with the patches applied
for PR28743 (commit 2f83249c13 and c804c6f98d).
PR 28827
* testsuite/ld-powerpc/pr28827-1.s,
* testsuite/ld-powerpc/pr28827-1.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
Supporting -static-pie on PowerPC64 requires the linker to properly
treat SHN_ABS symbols for cases like glibc's _nl_current_LC_CTYPE_used
absolute symbol. I've been slow to fix the linker on powerpc because
there is some chance that this will break some shared libraries or
PIEs.
bfd/
* elf64-ppc.c (ppc64_elf_check_relocs): Consolidate local sym
handling code. Don't count dyn relocs against non-dynamic
absolute symbols.
(dec_dynrel_count): Adjust to suit.
(ppc64_elf_edit_toc): Don't remove entries for absolute symbols
when pic.
(allocate_got): Don't allocate space for got relocs against
non-dynamic absolute syms.
(ppc64_elf_layout_multitoc): Likewise.
(got_and_plt_relr): Likewise.
(ppc64_elf_size_dynamic_sections): Likewise for local got.
(got_and_plt_relr_for_local_syms): Likewise.
(ppc64_elf_size_stubs): Don't allocate space for relr either.
(ppc64_elf_relocate_section): Don't write relocs against non-dynamic
absolute symbols. Don't optimise got and toc code sequences
loading absolute symbol entries.
ld/
* testsuite/ld-powerpc/abs-reloc.s,
* testsuite/ld-powerpc/abs-static.d,
* testsuite/ld-powerpc/abs-static.r,
* testsuite/ld-powerpc/abs-pie.d,
* testsuite/ld-powerpc/abs-pie.r,
* testsuite/ld-powerpc/abs-shared.d,
* testsuite/ld-powerpc/abs-shared.r,
* testsuite/ld-powerpc/abs-pie-relr.d,
* testsuite/ld-powerpc/abs-pie-relr.r,
* testsuite/ld-powerpc/abs-shared-relr.d,
* testsuite/ld-powerpc/abs-shared-relr.r: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
VER_FLG_WEAK doesn't indicate that all symbol references of the symbol
version have STB_WEAK. VER_FLG_WEAK indicates a weak symbol version
definition with no symbols associated with it. It is used to verify
the existence of a particular implementation without any symbol references
to the weak symbol version.
PR ld/24718
* testsuite/ld-elf/pr24718-1.d: New file.
* testsuite/ld-elf/pr24718-1.s: Likewise.
* testsuite/ld-elf/pr24718-1.t: Likewise.
In trying to find a testcase for PR28827, I managed to hit a linker
error in bfd_set_section_contents with a .branch_lt input section
being too large for the output .branch_lt.
bfd/
PR 28827
* elf64-ppc.c (ppc64_elf_size_stubs): Set section size to
maxsize past STUB_SHRINK_ITER before laying out. Remove now
unnecessary conditional setting of maxsize at start of loop.
ld/
* testsuite/ld-powerpc/pr28827-2.d,
* testsuite/ld-powerpc/pr28827-2.lnk,
* testsuite/ld-powerpc/pr28827-2.s: New test.
* testsuite/ld-powerpc/powerpc.exp: Run it.
Using a symbol other than .TOC. with @tocbase is an extension to the
ABI. It is never valid to use a symbol without a definition in the
binary, and symbols on these expressions cannot be overridden. Make
this explicit by using ".hidden" in the testcase.
* testsuite/ld-powerpc/symtocbase-1.s: Align data. Make function
entry symbol hidden.
* testsuite/ld-powerpc/symtocbase-2.s: Likewise.
* testsuite/ld-powerpc/symtocbase.d: Adjust expected output.
1. Compute the desired PT_GNU_RELRO segment base and find the maximum
section alignment of sections starting from the PT_GNU_RELRO segment.
2. Find the first preceding load section.
3. Don't add the 1-page gap between the first preceding load section and
the relro segment if the maximum page size >= the maximum section
alignment. Align the PT_GNU_RELRO segment first. Subtract the maximum
page size if therer is still a 1-page gap.
PR ld/28743
PR ld/28819
* ldlang.c (lang_size_relro_segment_1): Rewrite.
* testsuite/ld-x86-64/pr28743-1.d: New file.
* testsuite/ld-x86-64/pr28743-1.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr28743-1.
PowerPC64 takes a more traditional approach to DT_RELR than x86. Count
relative relocs in check_relocs, allocate space for them and output in
the usual places but not doing so when enable_dt_relr. DT_RELR is
sized in the existing ppc stub relaxation machinery, run via the
linker's ldemul_after_allocation hook. DT_RELR is output in the same
function that writes ppc stubs, run via ldemul_finish.
This support should be considered experimental.
bfd/
* elf64-ppc.c (struct ppc_local_dyn_relocs): Renamed from
ppc_dyn_relocs. Add rel_count field. Update uses.
(struct ppc_dyn_relocs): New. Replace all uses of elf_dyn_relocs.
(struct ppc_link_hash_table): Add relr_alloc, relr_count and
relr_addr.
(ppc64_elf_copy_indirect_symbol): Merge rel_count.
(ppc64_elf_check_relocs): Init rel_count for global and local syms.
(dec_dynrel_count): Change r_info param to reloc pointer. Update
all callers. Handle decrementing rel_count.
(allocate_got): Don't allocate space for relative relocs when
enable_dt_relr.
(allocate_dynrelocs): Likewise.
(ppc64_elf_size_dynamic_sections): Likewise. Handle srelrdyn.
(ppc_build_one_stub): Don't emit relative relocs on .branch_lt.
(compare_relr_address, append_relr_off): New functions.
(got_and_plt_relr_for_local_syms, got_and_plt_relr): Likewise.
(ppc64_elf_size_stubs): Size .relr.syn.
(ppc64_elf_build_stubs): Emit .relr.dyn.
(build_global_entry_stubs_and_plt): Don't output relative relocs
when enable_dt_relr.
(write_plt_relocs_for_local_syms): Likewise.
(ppc64_elf_relocate_section): Likewise.
binutils/
* testsuite/lib/binutils-common.exp (supports_dt_relr): Add
powerpc64.
ld/
* emulparams/elf64ppc.sh: Source dt-relr.sh.
* testsuite/ld-elf/dt-relr-2b.d: Adjust for powerpc.
* testsuite/ld-elf/dt-relr-2c.d: Likewise.
* testsuite/ld-elf/dt-relr-2d.d: Likewise.
* testsuite/ld-elf/dt-relr-2e.d: Likewise.
include/
* bfdlink.h (struct bfd_link_info): Add commonpagesize_is_set.
ld/
PR 28751
* emultempl/elf.em (handle_option): Set commonpagesize_is_set.
* ldelf.c (ldelf_after_parse): Don't error when only one of
-z max-page-size or -z common-page-size is given, correct the
other value to make it sane.
* testsuite/ld-elf/elf.exp (mbind2a, mbind2b): Do not pass
-z max-page-size.
Otherwise the very simple test may not be linked with libc.so at all,
and thus correctly have no version reference added. Causing failure
of the dt-relr-glibc-1b.so test.
* testsuite/ld-elf/dt-relr.exp: Link with --no-as-needed.
It might seem to work, but only if '/' is a start of comment char.
* testsuite/ld-elf/dt-relr-1.s: Use # for comment.
* testsuite/ld-elf/dt-relr-2.s: Likewise.
* testsuite/ld-elf/dt-relr-3.s: Likewise.
When DT_RELR is enabled, to avoid random run-time crash with older glibc
binaries without DT_RELR support, add a GLIBC_ABI_DT_RELR symbol version,
which is provided by glibc with DT_RELR support, dependency on the shared
C library if it provides a GLIBC_2.XX symbol version.
bfd/
* elflink.c (elf_link_add_dt_relr_dependency): New function.
(bfd_elf_size_dynamic_sections): Call
elf_link_add_dt_relr_dependency if DT_RELR is enabled.
ld/
* ld.texi: Mention GLIBC_ABI_DT_RELR in -z pack-relative-relocs
entry.
* testsuite/ld-elf/dt-relr-glibc-1.c: New file.
* testsuite/ld-elf/dt-relr-glibc-1a.rd: Likewise.
* testsuite/ld-elf/dt-relr-glibc-1b.rd: Likewise.
* testsuite/ld-elf/dt-relr.exp: Likewise.
This patch adds a primary support for hidden and internal visibility in
GNU linker for XCOFF format.
The protected visibility isn't yet supported.
PR 22085
bfd/ChangeLog:
* xcofflink.c (xcoff_dynamic_definition_p): Add hidden
and internal visibility support.
(xcoff_link_add_symbols): Likewise.
(xcoff_auto_export_p): Likewise.
(bfd_xcoff_export_symbol): Likewise.
(xcoff_link_input_bfd): Likewise.
ld/ChangeLog:
* testsuite/ld-vsb/main.c: Adapt for XCOFF.
* testsuite/ld-vsb/sh1.c: Likewse.
* testsuite/ld-vsb/vsb.exp: Likewise.
* testsuite/ld-vsb/visibility-1-xcoff-32.d: New test.
* testsuite/ld-vsb/visibility-1-xcoff-64.d: New test.
* testsuite/ld-vsb/visibility-2-xcoff-32.d: New test.
* testsuite/ld-vsb/visibility-2-xcoff-64.d: New test.
* testsuite/ld-vsb/xcoffvsb.dat: New test.
A following patch will add visibility support in ld for XCOFF. Thus,
ld-elfvsb is renamed ld-vsb and a suffix is added to files targeting only
ELF format.
ld/ChangeLog:
* testsuite/ld-elfvsb: rename as ld-vsb.
* testsuite/ld-elfvsb/hidden0.d: move to ld-vsb and rename with
suffix -elf.d.
* testsuite/ld-elfvsb/hidden1.d: Likewise.
* testsuite/ld-elfvsb/hidden2.d: Likewise.
* testsuite/ld-elfvsb/internal0.d: Likewise.
* testsuite/ld-elfvsb/internal1.d: Likewise.
* testsuite/ld-elfvsb/protected0.d: Likewise.
* testsuite/ld-elfvsb/protected1.d: Likewise.
XCOFF assembly defines the visibility using an additional argument
on several pseudo-ops: .globl, .weak, .extern and .comm.
This implies that .globl and .weak syntax is different than the
usual GNU syntax. But we want to provide compatibility with AIX
assembler, especially because GCC is generating the visibility
using this XCOFF syntax.
PR 22085
bfd/ChangeLog:
* coffcode.h (coff_write_object_contents): Change XCOFF header
vstamp field to 2.
* coffgen.c (coff_print_symbol): Increase the size for n_type.
gas/ChangeLog:
* config/tc-ppc.c (ppc_xcoff_get_visibility): New function.
(ppc_globl): New function.
(ppc_weak): New function.
(ppc_comm): Add visibility field support.
(ppc_extern): Likewise.
* testsuite/gas/all/cofftag.d: Adjust to new n_type size
providing by objdump.
* testsuite/gas/ppc/test1xcoff32.d: Likewise.
* testsuite/gas/ppc/aix.exp: Add new tests.
* testsuite/gas/ppc/xcoff-visibility-1-32.d: New test.
* testsuite/gas/ppc/xcoff-visibility-1-64.d: New test.
* testsuite/gas/ppc/xcoff-visibility-1.s: New test.
include/ChangeLog:
* coff/internal.h (SYM_V_INTERNAL, SYM_V_HIDDEN,
SYM_V_PROTECTED, SYM_V_EXPORTED, SYM_V_MASK): New defines.
* coff/xcoff.h (struct xcoff_link_hash_entry): Add visibility
field.
ld/ChangeLog:
* testsuite/ld-pe/pr19803.d: Adjust to new n_type size
providing by objdump.
This patch adds support for TLS relocation targeting C_HIDEXT symbols.
In gas, TLS relocations, except R_TLSM and R_TLMSL, must keep the value
of their target symbol.
In ld, it simply ensures that internal TLS symbols are added to the
linker hash table for xcoff_reloc_type_tls.
It also improves the tests made by both.
bfd/ChangeLog:
* coff-rs6000.c (xcoff_howto_table): Fix name of R_TLSML.
(xcoff_reloc_type_tls): Replace the error when h is NULL by
an assert.
(xcoff_complain_overflow_unsigned_func): Adjust comments.
* coff64-rs6000.c (xcoff64_howto_table): Fix name of R_TLSML.
* xcofflink.c (xcoff_link_add_symbols_to_hash_table): New
function.
(xcoff_link_add_symbols): Add C_HIDEXT TLS symbols to the linker
hash table.
gas/ChangeLog:
* config/tc-ppc.c (md_apply_fix): Enable support for TLS
relocation over internal symbols.
* testsuite/gas/ppc/aix.exp: Replace xcoff-tlms by xcoff-tls.
* testsuite/gas/ppc/xcoff-tlsm-32.d: Removed.
* testsuite/gas/ppc/xcoff-tlsm-64.d: Removed.
* testsuite/gas/ppc/xcoff-tlsm.s: Removed.
* testsuite/gas/ppc/xcoff-tls-32.d: New test.
* testsuite/gas/ppc/xcoff-tls-64.d: New test.
* testsuite/gas/ppc/xcoff-tls.s: New test.
ld/ChangeLog:
* testsuite/ld-powerpc/aix52.exp: Improve aix-tls-reloc test.
* testsuite/ld-powerpc/aix-tls-reloc.s: Likewise.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: Removed.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: Removed.
* testsuite/ld-powerpc/aix-tls-reloc-32.dd: New test.
* testsuite/ld-powerpc/aix-tls-reloc-32.dt: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.dd: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.dt: New test.
DT_RELR encodes consecutive R_*_RELATIVE relocations in GOT (the global
offset table) and data sections in a compact format:
https://groups.google.com/g/generic-abi/c/bX460iggiKg
On some targets, R_*_RELATIVE relocations are counted and the GOT offsets
are allocated when setting the dynamic section sizes after seeing all
relocations. R_*_RELATIVE relocations are generated while relocating
sections after section layout has been finalized.
To prepare for DT_RELR implementation on these targets, extract
_bfd_elf_link_iterate_on_relocs from _bfd_elf_link_check_relocs so
that a backend can scan relocations in elf_backend_always_size_sections
For x86 targets, the old check_relocs is renamed to scan_relocs and a
new check_relocs is added to chek input sections and create dynamic
relocation sections so that they will be mapped to output sections.
scan_relocs is now called from elf_backend_always_size_sections.
Since relocations are scanned after __start, __stop, .startof. and
.sizeof. symbols have been finalized on x86, __[start|stop]_SECNAME for
--gc-sections -z start-stop-gc are now zero when all SECNAME sections
been garbage collected. This is no need for elf_x86_start_stop_gc_p.
bfd/
* elf-bfd.h (_bfd_elf_link_iterate_on_relocs): New.
* elf32-i386.c (elf_i386_convert_load_reloc): Don't call
elf_x86_start_stop_gc_p.
(elf_i386_check_relocs): Renamed to ...
(elf_i386_scan_relocs): This. Don't call
_bfd_elf_make_dynamic_reloc_section.
(elf_i386_always_size_sections): New.
(elf_backend_check_relocs): Removed.
(elf_backend_always_size_sections): New.
* elf64-x86-64.c (elf_x86_64_convert_load_reloc): Don't call
elf_x86_start_stop_gc_p.
(elf_x86_64_check_relocs): Renamed to ...
(elf_x86_64_scan_relocs): This. Don't call
_bfd_elf_make_dynamic_reloc_section.
(elf_x86_64_always_size_sections): New.
(elf_backend_check_relocs): Removed.
(elf_backend_always_size_sections): New.
* elflink.c (elf_link_check_or_scan_relocs):
New. Extracted from _bfd_elf_link_check_relocs.
(_bfd_elf_link_check_relocs): Call elf_link_check_or_scan_relocs.
* elfxx-x86.c (_bfd_x86_elf_check_relocs): New.
* elfxx-x86.h (X86_64_NEED_DYNAMIC_RELOC_TYPE_P): New.
(I386_NEED_DYNAMIC_RELOC_TYPE_P): Likewise.
(X86_NEED_DYNAMIC_RELOC_TYPE_P): Likewise.
(_bfd_x86_elf_check_relocs): Likewise.
(elf_backend_check_relocs): Likewise.
(elf_backend_always_size_sections): Removed.
(elf_x86_start_stop_gc_p): Likewise.
ld/
* testsuite/ld-i386/pr27491-1a.d: Updated.
* testsuite/ld-x86-64/pr27491-1a.d: Likewise.
Update the default ISA spec from 2.2 to 20191213 will change the default
version of i from 2.0 to 2.1. Since zicsr and zifencei are separated
from i 2.1, users need to add them in the architecture string if they need
fence.i and csr instructions. Besides, we also allow old ISA spec can
recognize zicsr and zifencei, but we won't output them since they are
already included in the i extension when i's version is less than 2.1.
bfd/
* elfxx-riscv.c (riscv_parse_add_subset): Allow old ISA spec can
recognize zicsr and zifencei.
gas/
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Updated to 20191213.
* testsuite/gas/riscv/csr-version-1p10.d: Added zicsr to -march since
the default version of i is 2.1.
* testsuite/gas/riscv/csr-version-1p11.d: Likewise.
* testsuite/gas/riscv/csr-version-1p12.d: Likewise.
* testsuite/gas/riscv/csr-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/option-arch-03.d: Updated i's version to 2.1.
* testsuite/gas/riscv/option-arch-03.s: Likewise.
ld/
* testsuite/ld-riscv-elf/call-relax.d: Added zicsr to -march since
the default version of i is 2.1.
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated i's version to 2.1.
* testsuite/ld-riscv-elf/attr-merge-arch-01a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-01b.: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-failed-02.d: Added zifencei
into Tag_RISCV_arch since it is added implied when i's version is
larger than 2.1.
Currently, on 32-bit and 64-bit ARM, it seems that ld generates p_align
values of 0x10000 even if no section alignment is greater than 0x1000.
The issue is more general and probably affects other targets with multiple
page sizes.
While file layout absolutely must take 64K page size into account, that
does not have to be reflected in the p_align value. If running on a 64K
kernel, the file will be loaded at a 64K page boundary by necessity. On
a 4K kernel, 64K alignment is not needed.
The glibc loader has been fixed to honor p_align:
https://sourceware.org/bugzilla/show_bug.cgi?id=28676
similar to kernel:
commit ce81bb256a224259ab686742a6284930cbe4f1fa
Author: Chris Kennelly <ckennelly@google.com>
Date: Thu Oct 15 20:12:32 2020 -0700
fs/binfmt_elf: use PT_LOAD p_align values for suitable start address
This means that on 4K kernels, we will start to do extra work for 64K
p_align, but this pointless for pretty much all binaries (whose section
alignment rarely exceeds 16).
The minimum page size is used, instead of the maximum section alignment
due to this glibc bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=28688
It has been fixed in glibc 2.35. But linker output must work on existing
glibc binaries.
1. Set p_align to the minimum page size while laying out segments aligning
to the maximum page size or section alignment. The run-time loader can
align segments to the minimum page size or above, depending on system page
size.
2. If -z max-page-size=NNN is used, p_align will be set to the maximum
page size or the largest section alignment.
3. If a section requires alignment higher than the minimum page size,
don't set p_align to the minimum page size.
4. If a section requires alignment higher than the maximum page size,
set p_align to the section alignment.
5. For objcopy, when the minimum page size != the maximum page size,
p_align may be set to the minimum page size while segments are aligned
to the maximum page size. In this case, the input p_align will be
ignored and the maximum page size will be used to align the ouput
segments.
6. Update linker to disallow the common page size > the maximum page size.
7. Update linker to avoid the common page size > the maximum page size.
8. Adjust pru_irq_map-1.d to expect p_align == sh_addralign:
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[ 0] NULL 00000000 000000 000000 00 0 0 0
[ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1
LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x4
vs.
Section Headers:
[Nr] Name Type Addr Off Size ES Flg Lk Inf Al
[ 0] NULL 00000000 000000 000000 00 0 0 0
[ 1] .text PROGBITS 20000000 00007c 000004 00 AX 0 0 4
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
LOAD 0x000074 0x00000000 0x00000000 0x00008 0x00008 RW 0x1
LOAD 0x00007c 0x20000000 0x20000000 0x00004 0x00004 R E 0x1
To enable this linker optimization, the backend should define ELF_P_ALIGN
to ELF_MINPAGESIZE.
bfd/
PR ld/28689
PR ld/28695
* elf-bfd.h (elf_backend_data): Add p_align.
* elf.c (assign_file_positions_for_load_sections): Set p_align
to the default p_align value while laying out segments aligning
to maximum page size or section alignment.
(elf_is_p_align_valid): New function.
(copy_elf_program_header): Call elf_is_p_align_valid to determine
if p_align is valid.
* elfxx-target.h (ELF_P_ALIGN): New. Default to 0.
(elfNN_bed): Add ELF_P_ALIGN.
* elfxx-x86.h (ELF_P_ALIGN): New. Set to ELF_MINPAGESIZE.
include/
PR ld/28689
PR ld/28695
* bfdlink.h (bfd_link_info): Add maxpagesize_is_set.
ld/
PR ld/28689
PR ld/28695
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Set
link_info.maxpagesize_is_set for -z max-page-size=NNN.
* ldelf.c (ldelf_after_parse): Disallow link_info.commonpagesize
> link_info.maxpagesize.
* testsuite/ld-elf/elf.exp: Pass -z max-page-size=0x4000 to
linker to build mbind2a and mbind2b.
* testsuite/ld-elf/header.d: Add -z common-page-size=0x100.
* testsuite/ld-elf/linux-x86.exp: Add PR ld/28689 tests.
* testsuite/ld-elf/p_align-1.c: New file.
* testsuite/ld-elf/page-size-1.d: New test.
* testsuite/ld-elf/pr26936.d: Add -z common-page-size=0x1000.
* testsuite/ld-elf/seg.d: Likewise.
* testsuite/ld-scripts/rgn-at5.d: Likewise.
* testsuite/ld-pru/pru_irq_map-1.d: Append 1 to name. Adjust
expected PT_LOAD segment alignment.
* testsuite/ld-pru/pru_irq_map-2.d: Append 2 to name.
* testsuite/ld-scripts/pr23571.d: Add -z max-page-size=0x1000.
Use 0x%v, instead of bfd_sprintf_vma, to report relative relocations.
Change linker relative relocations report from
tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x0000000000002000, info: 0x0000000000000025, addend: 0x0000000000001007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o
to
tmpdir/dump: R_X86_64_IRELATIVE (offset: 0x2000, info: 0x25, addend: 0x1007) against 'ifunc' for section '.data.rel.ro.local' in tmpdir/report-reloc-1.o
bfd/
* elfxx-x86.c (_bfd_x86_elf_link_report_relative_reloc): Use
0x%v instead of bfd_sprintf_vma.
ld/
* testsuite/ld-i386/report-reloc-1.l: Updated.
* testsuite/ld-x86-64/report-reloc-1.l: Likewise.
