and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
prevent hang on non-FPU processors (PR 9775).
(mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem
setting breakpoints and improve loading speed.
* coffread.c (record_minimal_symbol): Don't presave name string
on symbol_obstack before passing to prim_record_minimal_symbol.
It now handles saving the string itself.
* dbxread.c (read_dbx_dynamic_symtab): Ditto.
* mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
* os9kread.c (record_minimal_symbol): Ditto.
* solib.c (solib_add_common_symbols): Ditto.
* coffread.c (coff_symtab_read): Don't presave name string on
symbol_obstack before passing to prim_record_minimal_symbol_and_info.
It now handles saving the string itself.
* dbxread.c (record_minimal_symbol): Ditto.
* elfread.c (record_minimal_symbol_and_info): Ditto.
* dstread.c (record_minimal_symbol): Remove static function that just
called prim_record_minimal_symbol with the same args (after change to
prim_record_minimal_symbol to do it's own name string saves).
* nlmread.c (record_minimal_symbol): Ditto.
* somread.c (record_minimal_symbol): Ditto.
* hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
(hpread_read_function_type): Ditto.
(hpread_process_one_debug_symbol): Ditto.
* mdebugread.c (parse_symbol): Ditto.
(new_symbol): Ditto.
* minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
* coffread.c (process_coff_symbol): Use obsavestring to save
SYMBOL_NAME, rather than obstack_copy0.
* dstread.c (create_new_symbol): Ditto
* symfile.c (obconcat): Ditto.
* stabsread.c (patch_block_stabs): Ditto.
* xcoffread.c (SYMNAME_ALLOC): Ditto.
* symfile.c (obsavestring): Update comments
* solib.c (solib_add_common_symbols): Remove local var origname.
config/sparc/tm-sparclite.h: Initialize tm_print_insn from
TM_PRINT_INSN, which comes from the tm file.
* Makefile.in (INTERNAL_LDFLAGS): Add in flags from configure.
* configure configure.in: Only make sol-thread.o for native.
Also, switch to dlopened libthread_db.so.1.
* sol-thread.c: Switch to using dlopen to get the thread_db
library.
* configure, configure.in: Change test for libthread_db to only
work for configs where build/host/target are the same.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
* monitor.h,monitor.c:
Added monitor flags MO_NO_ECHO_ON_SETMEM (don't expect echo on
setmem command), MO_RUN_FIRST_TIME (if command to start process
running on target is different from one to continue execution),
MO_HEX_PREFIX (if addresses from monitor have a "0x" prefix).
* monitor.c,parse.c,sparc-tdep.c:
Don't require strings in the registers array. This is to allow
NULLs to be place holders in the tm-*.h file so that only minor
changes are needed when a new processor is introduced (eg, one
without floating point).
* sparc-tdep.c: Conditionally remove dependancies on floating point.
* sparclet-rom.c,config/sparc/sparclet.mt,config/sparc/tm-sparclet.h:
New files for target sparclet.
* symfile.c: Add option for 2nd parameter on load command : a load
offset added to the vma of each section.
Add option "tcp_remote" to target command if using
tcp to connect to a remote host which is then connected
via serial port to the e7000 (for exampole, a port master).
(e7000_open): Change to call e7000_parse_device.
gdb initialization, also report how long dejagnu waited. Restore
old timeout before doing error return. Temporarily increase timeout
by 3 minutes to allow for slow startups over heavy NFS use.
* gdbtk.tcl: Add hint for using debug_interface.
(center_window, add_breakpoint_frame, delete_breakpoint_frame):
Enclose arg in braces for consistency.
(create_registers_window, populate_reg_window, update_registers):
Major rewrite to support displaying multiple formats in the register window.
(init_reg_info): New function.
(recompute_reg_display_list): Reset reg_display_list, start
register display lines at line 2.
PR 9457
avoid backing up over prompt. At every input, make sure insert
point is at least after command start, handle control-u to delete
current input line.
(tclsh): Handle backspace to avoid backing up over prompt. Handle
control-u to delete current input line.
(dvi): Add stabs.dvi.
(ps): New target.
(all-doc): Depend on info, dvi, and ps targets.
(STAGESTUFF): Add *.ps and *.dvi files.
(clean-info, clean-dvi): Remove.
(mostlyclean): Does not depend upon clean-info or clean-dvi,
rules completely rewritten.
(maintainer-clean): Remove clean-info and clean-dvi
dependencies and put their actions in the rules.
(gdb.ps): New target
(gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
intermediate TeX files, whether they have 2 or 3 character
extensions.
(gdbint.ps): Add target and rules.
(gdb-internals): Delete unused target.
(Makefile): Depends upon config.status also.
