gdb/doc/ChangeLog
2015-02-12 David Taylor <dtaylor@emc.com>
* gdb.texinfo (Tracepoint Packets): Document the builtin and name
fields of the QTDV packet.
PR binutils/17512
* dwarf.c (read_1_byte, read_1_signed_byte, read_2_bytes)
(read_4_bytes, read_8_bytes, read_n_bytes, read_string)
(read_indirect_string, read_alt_indirect_string)
(read_alt_indirect_ref, read_address, read_abbrevs)
(read_attribute_value, read_attribute, decode_line_info)
(find_abstract_instance_name, read_rangelist)
(scan_unit_for_symbols, parse_comp_unit)
(_bfd_dwarf2_find_nearest_line): Harden DWARF reading code. Pass
end pointers to reading functions and check for offsets taking
pointers out of range. Replace calls to read_*_leb128 with calls
to safe_read_leb128.
(* elf64-ppc.c (opd_entry_value): Add a check for an overlarge
offset.
* syms.c (_bfd_stab_section_find_nearest_line): Add checks for
computed file_name address being before the start of the string
table.
Gold supports:
--map-whole-files Map whole files to memory (default on 64-bit hosts)
--no-map-whole-files Map relevant file parts to memory (default on 32-bit hosts)
This patch adds --[no-]map-whole-files command line options for gold
compatibility. They are ignored for ld.
* lexsup.c (ld_options): Add --[no-]map-whole-files for gold
option compatibility.
* rl78-decode.opc: Add 'a' attribute to instructions that support
[HL+0] addressing.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Display the offset in [HL+0]
addresses.
It definitely does not test all the RETURN_MASK_ERROR cases. But it tests at
least two of them.
gdb/testsuite/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-framefilter.exp (pagination quit - *): New tests.
Now when the code is exception safe we can let RETURN_QUIT to pass through as
all the installed cleanups with handle that.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_single_arg, enumerate_locals)
(py_print_frame): Use RETURN_MASK_ERROR.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Mention RETURN_QUIT in
function comment. Wrap all function that can throw in cleanups.
(gdbpy_apply_frame_filter): Wrap all function that can throw in
cleanups.
goto error patters are sometimes AFAIK used in C for the cases like:
int retval=-1;
if (!(a=malloc())) goto error;
if (!(b=malloc())) goto error_a;
if (!(c=malloc())) goto error_b;
retval=0;
error_c: free(c);
error_b: free(b);
error_a: free(a);
error: return retval;
But here there is single error label with one do_cleanups() which I do not find
it worth the goto complication. Without goto one can then furher merge code in
the exit paths in the next patches and ... after all it is all the same, just
without a goto.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Substitute goto error.
Remove the error label.
Nothing significant but I find code more clear with less deep indentation.
gdb/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* python/py-framefilter.c (py_print_frame): Put conditional code paths
with goto first, indent the former else codepath left. Put variable
'elided' to a new inner block.
PR binutils/17531
* dwarf.c (display_debug_pubnames_worker): Work around compiler
bug checking address ranges.
(display_debug_frames): Likewise.
(display_gdb_index): Likewise.
(process_cu_tu_index): Add range check on the ncols value.
Linker plugin_maybe_claim is the interface of linker plugin support.
This patch extracts linker plugin_maybe_claim into plugin_object_p and
makes it available to BFD via a new function:
void register_ld_plugin_object_p (const bfd_target *(*) (bfd *));
bfd_plugin_object_p calls plugin_object_p registered by linker first. It
adds an enum bfd_plugin_format field and a pointer to plugin dummy BFD so
that plugin_object_p stores plugin dummy BFD to allow plugin_maybe_claim
to retrieve it later.
bfd/
PR ld/17878
* bfd.c (bfd_plugin_format): New.
(bfd): Add plugin_format and plugin_dummy_bfd.
* plugin.c (try_load_plugin): Take a pointer to bfd_boolean
argument to return TRUE if any plugin is found. Set plugin_format.
(has_plugin): New.
(bfd_plugin_target_p): New.
(bfd_plugin_specified_p): Likewise.
(bfd_plugin_target_p): Likewise.
(register_ld_plugin_object_p): Likewise.
(bfd_plugin_set_plugin): Set has_plugin.
(load_plugin): Cache try_load_plugin result.
(bfd_plugin_object_p): Try ld_plugin_object_p first. Check
plugin_format.
* plugin.h (bfd_plugin_target_p): New.
(bfd_plugin_specified_p): Likewise.
(register_ld_plugin_object_p): Likewise.
* bfd-in2.h: Regenerated.
ld/
PR ld/17878
* plugin.c: Include ../bfd/plugin.h.
(plugin_get_ir_dummy_bfd): Call bfd_create with
link_info.output_bfd instead of srctemplate. Copy BFD info
from srctemplate only if it doesn't use BFD plugin target
vector.
(plugin_load_plugins): Call register_ld_plugin_object_p with
(plugin_object_p)
(plugin_maybe_claim): Renamed to ...
(plugin_object_p): This. Return dummy BFD target vector if
input is calimed by plugin library, otherwise return NULL.
Update plugin_format and plugin_dummy_bfd.
(plugin_maybe_claim): New. Use plugin_object_p.
xx
Linking GDB as a C++ program, we get:
src/gdb/buildsym.c:226: multiple definition of `within_function'
xcoffread.o:src/gdb/xcoffread.c:181: first defined here
gdb/
2015-02-11 Pedro Alves <palves@redhat.com>
* xcoffread.c (within_function): Delete.
In C, we can forward declare static structure instances. That doesn't
work in C++ though. C++ treats these as definitions. So then the
compiler complains about symbol redefinition, like:
src/gdb/elfread.c:1569:29: error: redefinition of ‘const sym_fns elf_sym_fns_lazy_psyms’
src/gdb/elfread.c:53:29: error: ‘const sym_fns elf_sym_fns_lazy_psyms’ previously declared here
The intent of static here is naturally to avoid making these objects
visible outside the compilation unit. The equivalent in C++ would be
to instead define the objects in the anonymous namespace. But given
that it's desirable to leave the codebase compiling as both C and C++
for a while, this just makes the objects extern.
(base_breakpoint_ops is already declared in breakpoint.h, so we can
just remove the forward declare from breakpoint.c)
gdb/ChangeLog:
2015-02-11 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
* breakpoint.c (base_breakpoint_ops): Delete.
* dwarf2loc.c (dwarf_expr_ctx_funcs): Make extern.
* elfread.c (elf_sym_fns_gdb_index, elf_sym_fns_lazy_psyms): Make extern.
* guile/guile.c (guile_extension_script_ops, guile_extension_ops): Make extern.
* ppcnbsd-tdep.c (ppcnbsd2_sigtramp): Make extern.
* python/py-arch.c (arch_object_type): Make extern.
* python/py-block.c (block_syms_iterator_object_type): Make extern.
* python/py-bpevent.c (breakpoint_event_object_type): Make extern.
* python/py-cmd.c (cmdpy_object_type): Make extern.
* python/py-continueevent.c (continue_event_object_type)
* python/py-event.h (GDBPY_NEW_EVENT_TYPE): Remove 'qual'
parameter. Update all callers.
* python/py-evtregistry.c (eventregistry_object_type): Make extern.
* python/py-exitedevent.c (exited_event_object_type): Make extern.
* python/py-finishbreakpoint.c (finish_breakpoint_object_type): Make extern.
* python/py-function.c (fnpy_object_type): Make extern.
* python/py-inferior.c (inferior_object_type, membuf_object_type): Make extern.
* python/py-infevents.c (call_pre_event_object_type)
(inferior_call_post_event_object_type).
(memory_changed_event_object_type): Make extern.
* python/py-infthread.c (thread_object_type): Make extern.
* python/py-lazy-string.c (lazy_string_object_type): Make extern.
* python/py-linetable.c (linetable_entry_object_type)
(linetable_object_type, ltpy_iterator_object_type): Make extern.
* python/py-newobjfileevent.c (new_objfile_event_object_type)
(clear_objfiles_event_object_type): Make extern.
* python/py-objfile.c (objfile_object_type): Make extern.
* python/py-param.c (parmpy_object_type): Make extern.
* python/py-progspace.c (pspace_object_type): Make extern.
* python/py-signalevent.c (signal_event_object_type): Make extern.
* python/py-symtab.c (symtab_object_type, sal_object_type): Make extern.
* python/py-type.c (type_object_type, field_object_type)
(type_iterator_object_type): Make extern.
* python/python.c (python_extension_script_ops)
(python_extension_ops): Make extern.
* stap-probe.c (stap_probe_ops): Make extern.
These were the BFD changes needed for building a C++ GDB with
--enable-targets=all, on x86_64 Fedora 20.
For libbfd.h and libcoff.h, this does same as already done when
generating bfd.h: open extern "C" in the -in.h header, and close it
from the Makefile.
bfd/doc/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* Makefile.am (libbfd.h, libcoff.h): Close extern "C" scope.
* Makefile.in: Regenerate.
bfd/ChangeLog:
2015-02-11 Pedro Alves <palves@redhat.com>
* libbfd-in.h [__cplusplus]: Open extern "C" scope.
* libcoff-in.h [__cplusplus]: Open extern "C" scope.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
* elf-bfd.h [__cplusplus]: Wrap in extern "C".
* mach-o.h [__cplusplus]: Wrap in extern "C".
* som.h [__cplusplus]: Wrap in extern "C".
On decr_pc_after_break targets, GDB adjusts the PC incorrectly if a
background single-step stops somewhere where PC-$decr_pc has a
breakpoint, and the thread that finishes the step is not the current
thread, like:
ADDR1 nop <-- breakpoint here
ADDR2 jmp PC
IOW, say thread A is stepping ADDR2's line in the background (an
infinite loop), and the user switches focus to thread B. GDB's
adjust_pc_after_break logic confuses the single-step stop of thread A
for a hit of the breakpoint at ADDR1, and thus adjusts thread A's PC
to point at ADDR1 when it should not, and reports a breakpoint hit,
when thread A did not execute the instruction at ADDR1 at all.
The test added by this patch exercises exactly that.
I can't find any reason we'd need the "thread to be examined is still
the current thread" condition in adjust_pc_after_break, at least
nowadays; it might have made sense in the past. Best just remove it,
and rely on currently_stepping().
Here's the test's log of a run with an unpatched GDB:
35 while (1);
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next over nop
next&
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next& over inf loop
thread 1
[Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 29027))](running)
(gdb)
PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: switch to main thread
Breakpoint 2, thread_function (arg=0x0) at ...src/gdb/testsuite/gdb.threads/step-bg-decr-pc-switch-thread.c:34
34 NOP; /* set breakpoint here */
FAIL: gdb.threads/step-bg-decr-pc-switch-thread.exp: no output while stepping
gdb/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* infrun.c (adjust_pc_after_break): Don't adjust the PC just
because the event thread is not the current thread.
gdb/testsuite/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
Output an ARM state mapping symbol at the start of the PLT. With the
current code objdump will fail to disassemble the PLT that gold
creates.
gold/ChangeLog:
2015-02-11 Will Newton <will.newton@linaro.org>
PR gold/13321
* arm.cc (Target_arm::make_plt_section): Create an ARM
state mapping symbol at the start of the PLT.
If plugin didn't claim the file, unmap the buffer.
* plugin.c (plugin_input_file_t): Add use_mmap.
(plugin_pagesize): New.
(get_view): Use plugin_pagesize. Set use_mmap if mmap is used.
(plugin_load_plugins): Initialize plugin_pagesize.
(plugin_maybe_claim): Unmap the buffer if plugin didn't claim the
file.
This patch fixes a pair of TUI issues related to screen resizing:
1. In tui_handle_resize_during_io(), when the TUI screen gets resized,
we fail to update GDB's idea about the height of the output window.
You can see this bug by doing:
a. Enter TUI mode.
b. "show height"
c. Resize the terminal.
d. "show height"
And observe that despite resizing the terminal, the reported height
remains unchanged. Note that a similar issue exists in the CLI.
The fix for this is simple: call tui_update_gdb_sizes() after performing
a resize, so that the "height" variable remains consistent with the
height of TUI's output window.
2. In tui_enable(), the call to tui_update_gdb_sizes() may clobber
readline's idea of the actual screen dimensions, and a subsequent
pending resize will use bogus terminal dimensions.
You can see this bug by doing:
a. Enter TUI mode.
b. Exit TUI mode.
c. Resize the terminal.
d. Enter TUI mode.
e. Press a key to resize the screen.
And observe that the terminal gets incorrectly resized to the wrong
dimensions. To fix this issue, we should oppurtunistically resize the
screen in tui_enable(). That way we eliminate the possibility of a
pending resize triggering right after we call tui_update_gdb_sizes().
gdb/ChangeLog:
* tui/tui-io.c (tui_handle_resize_during_io): Call
tui_update_gdb_sizes() after resizing the screen.
* tui/tui.c (tui_enable): Resize the terminal before
calling tui_update_gdb_sizes().
If we submit a command while the prompt cursor is somewhere other than
at the end of the command line, the command line gets truncated as the
command window gets shifted one line up. This happens because we fail
to properly move the cursor to the end of the command line before
transmitting the newline to ncurses. We need to move the cursor because
when ncurses outputs a newline it truncates any text that appears
past the end of the cursor.
The fix is generic enough to work properly even in multi-line secondary
prompts like the quit prompt.
gdb/ChangeLog:
* tui/tui-io.c (tui_getc): Move cursor to the end of the command
line before printing a newline.
Some local changes I was working on related to SIGTRAP handling
resulted in "signal SIGTRAP" no longer passing the SIGTRAP to the
inferior.
Surprisingly, only annota1.exp catches this. This commit adds a test
that doesn't rely on annotations, so that at the point annotations are
finaly dropped, we still have this use case covered ...
This is a multi-threaded test to also exercise the case of first
needing to do a step-over before delivering the signal.
Tested on x86_64 Fedora 20, native, remote/extended-remote gdbserver.
gdb/testsuite/
2015-02-10 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-sigtrap.c: New file.
* gdb.threads/signal-sigtrap.exp: New file.
displaced_step_fixup takes an thread to work with, as argument. OTOH,
gdbarch_displaced_step_fixup fixes up the current thread. The former
calls the latter without making sure the current thread is the one
that was passed in. If it is not, then gdbarch_displaced_step_fixup
may e.g., try reading from a running thread, which doesn't work on
some targets, or worse, read memory from the wrong inferior and
succeed.
This is mostly a latent problem currently, as non-stop switches the
current thread to the event thread early in fetch_inferior_event.
Tested on x86_64 Fedora 20.
gdb/
2015-02-10 Pedro Alves <palves@redhat.com>
* infrun.c (displaced_step_fixup): Switch to the event thread
before calling gdbarch_displaced_step_fixup.
When gdbserver is called with --multi and attach has not been called yet
and tstart is called on the gdb client, gdbserver would crash.
This patch fixes gdbserver so that it returns E01 to the gdb client.
Also this patch adds a testcase to verify this bug named no-attach-trace.exp
gdb/gdbserver/ChangeLog:
PR breakpoints/15956
* tracepoint.c (cmd_qtinit): Add check for current_thread.
gdb/testsuite/ChangeLog:
* gdb.trace/no-attach-trace.c: New file.
* gdb.trace/no-attach-trace.exp: New file.
Building GDB as a C++ program, we see:
In file included from gdb/microblaze-tdep.c:37:0:
gdb/../opcodes/../opcodes/microblaze-opcm.h: At global scope:
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected identifier before ‘or’ token
ncget, ncput, muli, bslli, bsrai, bsrli, mului, or, and, xor,
^
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected ‘}’ before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:32:51: error: expected unqualified-id before ‘or’ token
gdb/../opcodes/../opcodes/microblaze-opcm.h:60:1: error: expected declaration before ‘}’ token
};
^
opcodes/ChangeLog:
2015-02-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
microblaze_and, microblaze_xor.
* microblaze-opc.h (opcodes): Adjust.
PR binutils/17531
* dwarf.c (display_debug_pubnames_worker): Use dwarf_vma type for
offset.
* readelf.c (dump_relocations): Handle printing offsets which are
MIN_INT.
(process_corefile_note_segment): Add range check of the namesz
field.
