Relaxable fragments can be relaxed when there are alignment requirements.
Besides, insert a dummy fragment in the final to make sure that all
alignment is traversed. Finally, convert these fragments
in md_convert_frag with relax_table.
- 32 128 bit vector registers (overlapping with the existing 16 64 bit
floating point registers)
- vector double instructions
- vector integer instructions
- scalar vector instructions (allowing to have more floating point
registers for scalar operations)
- vector string instructions
gas/ChangeLog:
* config/tc-s390.c (struct pd_reg): Remove.
(pre_defined_registers): Remove.
(REG_NAME_CNT): Remove.
(reg_name_search): Calculate the register number instead of doing
a lookup.
(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
reg_name_search signature.
(s390_parse_cpu): Support the new arch string z13.
(s390_insert_operand): Support for vector registers with the extra
field for the fifth bit of each vector register operand.
(md_gather_operand): Adjust to the new handling of optional
parameters.
* doc/as.texinfo: Document the z13 cpu string.
gas/testsuite/ChangeLog:
* gas/s390/esa-g5.d: Add a variant without the optional operand.
* gas/s390/esa-g5.s: Likewise.
* gas/s390/esa-z9-109.d: Likewise.
* gas/s390/esa-z9-109.s: Likewise.
* gas/s390/zarch-z9-109.d: Likewise.
* gas/s390/zarch-z9-109.s: Likewise.
* gas/s390/zarch-z10.d: For variants with a zero optional argument
it is not dumped by objdump anymore.
* gas/s390/zarch-zEC12.d: Likewise.
* gas/s390/zarch-z13.d: New file.
* gas/s390/zarch-z13.s: New file.
* gas/s390/s390.exp: Run the test for the z13 files.
include/opcode/ChangeLog:
* s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13.
ld/testsuite/ChangeLog:
* ld-s390/tlsbin.dd: The nopr register operand is optional and not
printed if 0 anymore.
opcodes/ChangeLog:
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
These two, other than VQSHLU, didn't have their immediates properly range
checked so far.
(Re-sending unchanged from the original v2 due to never having got an
answer to https://sourceware.org/ml/binutils/2013-04/msg00121.html.)
gas/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (do_neon_shl_imm): Check immediate range.
(do_neon_qshl_imm): Likewise.
gas/testsuite/
2015-01-12 Jan Beulich <jbeulich@suse.com>
* gas/arm/neon-addressing-bad.s: Add test for invalid VSHL,
VQSHL, and VQSHLU immediates.
* gas/arm/neon-addressing-bad.l: Update accordingly.
When fixups are converted to a difference type within md_apply_fix, we
previously left the contents of VALP (the value that was initially
computed within write.c:fixup_segment) unchanged. This is harmless,
except that this value is used within write.c:fixup_segment once we
return from md_apply_fix to perform an overflow check.
In some cases, the value computed in write.c:fixup_segment is so wrong
that an overflow error can be triggered. These errors are incorrect.
This patch avoids the overflow errors by adjusting the value in
write.c:fixup_segment using the VALP pointer in md_apply_fix.
A test for this issue is included.
gas/ChangeLog:
* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
diff fixups.
gas/testsuite/ChangeLog:
* gas/avr/large-debug-line-table.d: New file.
* gas/avr/large-debug-line-table.s: New file.
the X-Gene scheduling description up in the respective GCC backend.
* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
X-Gene 2.
* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
Using e.g.
.arch_extension simd
.arch_extension nocrypto
so far results in SIMD support getting disabled, which I can't see being
the purpose of the "no"-prefixed variants of architecture extension
specifications.
Of course it is questionable whether the current, counter intuitive
behavior needs to be retained, and the new behavior perhaps be made work
through e.g. a newly recognized "no-" prefix.
gas/
2015-01-07 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (struct arm_option_extension_value_table):
Split field "value" into fields "merge_value" and "clear_value".
(arm_extensions): Adjust initializer accordingly.
Have the assembler prepare for linker relaxation by default. This
means that users will be able to make use of linker relaxation without
having to adjust the assembler flags, this can make life easier when
compiling libraries.
Having this on by default in the assembler should make no difference to
the assembler code produced, however, some of the debug information will
be slightly less compressed.
A few tests needed to be updated as a result of this change as they
relied on linker relaxation support being off by default.
I've tightened up the definition of which sections can be relaxed on AVR
as part of this commit, the assembler used to think that all
non-debugging sections could be relaxed, when in reality only code
sections can be relaxed for AVR. The previous definition was not
dangerous, just over cautious. The new tighter definition allows an
extra test (gas/testsuite/gas/all/forward.d) to continue to pass.
gas/ChangeLog:
* config/tc-avr.c (struct avr_opt_s): Change link_relax to
no_link_relax, extend comment.
(enum options): Add new OPTION_NO_LINK_RELAX.
(md_longopts): Add entry for -mno-link-relax.
(md_parse_option): Handle OPTION_NO_LINK_RELAX, and update
OPTION_LINK_RELAX.
(md_begin): Initialise linkrelax from no_link_relax.
(md_show_usage): Include -mno-link-relax option.
(relaxable_section): Only allocatable code sections can be
relaxed.
* config/tc-avr.h (TC_LINKRELAX_FIXUP): Define.
gas/testsuite/ChangeLog:
* gas/all/gas.exp: Test will not pass on AVR due to linker
relaxation support.
* gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option.
* gas/avr/link-relax-elf-flag-clear.d: Likewise.
ld/testsuite/ChangeLog:
* ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax
option.
* ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise.
* ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise.
The AVR target uses a bit in the elf header flags to indicate if the
object was assembled ready for linker relaxation. Previously this flag
was always set, even when the object was not assembled ready for linker
relaxation.
This patch moves setting of the flag into the assembler, and sets it
only when the assembler is preparing the file for linker relaxation.
bfd/ChangeLog:
* elf32-avr.c (bfd_elf_avr_final_write_processing): Don't set
EF_AVR_LINKRELAX_PREPARED unconditionally.
gas/ChangeLog:
* config/tc-avr.c: Add include for elf/avr.h.
(avr_elf_final_processing): New function.
* config/tc-avr.h (elf_tc_final_processing): Define.
(avr_elf_final_processing): Declare
gas/testsuite/ChangeLog:
* gas/avr/link-relax-elf-flag-clear.d: New file.
* gas/avr/link-relax-elf-flag-set.d: New file.
* gas/avr/link-relax-elf-flag.s: New file.
gas/
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
gas/testsuite/
* gas/mips/r6-64.s: Remove .align directives from LDPC
instructions and add further tests for LDPC.
* gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected
output and update for new tests.
* gas/mips/r6-64-n64.d: Likewise.
* gas/mips/ldpc-unalign.l: New file.
* gas/mips/ldpc-unalign.s: Likewise.
* gas/mips/mips.exp: Run ldpc-unalign test.
This makes gas .cfi output to .debug_frame match register numbering
emitted by gcc. md_reg_eh_frame_to_debug_frame follows the ABI,
targets not using it, notably Linux, don't.
* config/tc-ppc.h (md_reg_eh_frame_to_debug_frame): Match current
gcc behaviour.
* config/te-aix.h: New file.
* configure.tgt: Use em=aix for powerpc-aix.
For conditional branches that need more than one trampoline to reach its
target assembler couldn't always find suitable trampoline because
post-loop condition check was placed inside the loop, resulting in
premature loop termination. Move check outside the loop.
This fixes the following build errors seen when assembling huge files
produced by gcc:
Error: jump target out of range; no usable trampoline found
Error: operand 1 of 'j' has out of range value '307307'
2014-11-25 Max Filippov <jcmvbkbc@gmail.com>
gas/
* config/tc-xtensa.c (search_trampolines): Move post-loop
condition check outside the search loop.
gas/testsuite/
* gas/xtensa/trampoline.d: Add expected output for branches.
* gas/xtensa/trampoline.s: Add test case for branches.
gas/
2014-11-21 Terry Guo <terry.guo@arm.com>
* config/tc-arm.c (md_assemble): Do not consider relaxation.
(md_convert_frag): Test and set target arch attribute accordingly.
(aeabi_set_attribute_string): Turn it into a global function.
* config/tc-arm.h (md_post_relax_hook): Enable it for ARM target.
(aeabi_set_public_attributes): Declare it.
gas/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* gas/arm/attr-arch-assumption.d: New file.
* gas/arm/attr-arch-assumption.s: Likewise.
ld/testsuite/
2014-11-21 Terry Guo <terry.guo@arm.com>
* ld-arm/tls-longplt-lib.s: Require ARMv6T2.
* ld-arm/tls-longplt.s: Likewise.
* ld-arm/tls-longplt-lib.d: Updated.
* ld-arm/tls-longplt.d: Likewise.
* config/tc-aarch64.c (warn_unpredictable_ldst): Check that transfer
registers are in the GP register set. Adjust warnings. Use correct
field member for address register.
* testsuite/gas/aarch64/diagnostic.l: Update.
Structions with R_X86_64_GOTTPOFF relocation must be encoded with REX
prefix even if it isn't required by destination register. Otherwise
linker can't safely perform IE -> LE optimization.
bfd/
PR ld/17482
* elf64-x86-64.c (elf_x86_64_relocate_section): Update comments
for IE->LE transition.
gas/
PR ld/17482
* config/tc-i386.c (output_insn): Add a dummy REX_OPCODE prefix
for structions with R_X86_64_GOTTPOFF relocation for x32 if needed.
gas/testsuite/
PR ld/17482
* gas/i386/ilp32/x32-tls.d: New file.
* gas/i386/ilp32/x32-tls.s: Likewise.
ld/testsuite/
PR ld/17482
* ld-x86-64/tlsie4.dd: Updated.
bfd/
* elfxx-mips.c (update_mips_abiflags_isa): Add E_MIPS_ARCH_32R6
and E_MIPS_ARCH_64R6 support.
ld/testsuite/
* ld-mips-elf/abiflags-strip10-ph.d: New file.
* ld-mips-elf/mips-eld.exp: Run the new test.
gas/
* config/tc-mips.c (mips_elf_final_processing): Add INSN_ISA32R6
and INSN_ISA64R6 support.
gas/testsuite/
* gas/mips/elf_arch_mips32r6.d: New file.
* gas/mips/elf_arch_mips64r6.d: New file.
* gas/mips/mips.exp: Run the new tests.
obstack_next_free is supposed to return a void* rather than the char*
it does currently, so expressions involving pointer arithmetic need
a cast. Avoid the issue.
* config/tc-d10v.c (find_opcode): Call frag_now_fix_octets rather
than equivalent obstack_next_free expression.
* config/tc-d30v.c (find_format): Likewise.
binutils:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* readelf.c (print_mips_isa_ext): Print the value of Octeon3.
gas:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* config/tc-mips.c (CPU_IS_OCTEON): Handle CPU_OCTEON3.
(mips_cpu_info_table): Octeon3 enables virt ase.
* doc/c-mips.texi: Document octeon3 as an acceptable value for
-march=.
gas/testsuite:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* gas/mips/mips.exp: Add support for Octeon3 architecture.
Also add in support for running Octeon3 tests.
* gas/mips/octeon3.d: New test.
* gas/mips/octeon3.s: New test source.
opcodes:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* mips-dis.c (mips_arch_choices): Add octeon3.
* mips-opc.c (IOCT): Include INSN_OCTEON3.
(IOCT2): Likewise.
(IOCT3): New define.
(IVIRT): New define.
(mips_builtin_opcodes): Add dmfgc0, dmtgc0, hypcall, mfgc0, mtgc0,
tlbinv, tlbinvf, tlbgr, tlbgwi, tlbginv, tlbginvf, tlbgwr, tlbgp, tlti
IVIRT instructions.
Extend mtm0, mtm1, mtm2, mtp0, mtp1, mtp2 instructions to take another
operand for IOCT3.
bfd:
2014-10-31 Andrew Pinski <apinski@cavium.com>
Naveen H.S <Naveen.Hurugalawadi@caviumnetworks.com>
* archures.c: Add octeon3 for mips target.
* bfd-in2.h: Regenerate.
* bfd/cpu-mips.c: Define I_mipsocteon3.
nfo_struct): Add octeon3 support.
* bfd/elfxx-mips.c: (_bfd_elf_mips_mach): Add support for
octeon3.
(mips_set_isa_flags): Add support for octeon3.
(bfd_mips_isa_ext): Add bfd_mach_mips_octeon3.
(mips_mach_extensions): Make bfd_mach_mips_octeon3 an
extension of bfd_mach_mips_octeon2.
(print_mips_isa_ext): Print the value of Octeon3.
