* frags.c (frag_grow): Don't be too greedy in allocating memory.
* config/tc-hppa.c (pa_block): Check arguments to .block[z].
gas/testsuite/
* gas/hppa/parse/block1.s: Use official limit (0x3fffffff) for
.block.
* config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
Handle label-without-colon before ordinary dot-pseudo as an
ordinary label. Don't leak memory for label-without-colon alone
on a line. Don't mmixal-munge operands for dot-pseudos.
2005-05-10 Jan Beulich <jbeulich@novell.com>
* macro.c (get_any_string): Remove the two last parameters. Replace
references to the former expand parameter by using macro_alternate.
Simplify loop condition for checking for end-of-string.
(get_string): Remove redunant call to sb_skip_white.
(do_formals): Remove two last arguments to get_any_string.
(macro_expand): Likewise.
(expand_irp): Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (optimize_disp): Discard displacement entirely when zero and
not required by encoding constraints.
gas/testsuite/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* gas/i386/tlsd.[sd]: Adjust to not assume zero displacement will
actually be present in memory addressing.
* gas/i386/tlspic.[sd]: Likewise.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Disallow use of prefix separator
and comma in Intel mode.
include/opcode/
2005-05-09 Jan Beulich <jbeulich@novell.com>
* i386.h (i386_optab): Add ht and hnt.
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
names to match ABI. Add more registers for 32-bit and 64-bit modes.
Make name array static and const. Adjust lookup to account for NULL
entries (standing for unused register numbers).
2005-05-09 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_insn): Consider all matching instructions
when checking for string instruction after string-only prefix.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* macro.c (new_formal, del_formal): New.
(do_formals): Use new_formal. Check for and parse qualifier. Warn if
required argument has default value. Stop looking for more formal
when there was a vararg one.
(macro_expand_body): Use new_formal and del_formal.
(macro_expand): Likewise. Initialize local variable err. Don't
return immediately when encountering an error. Warn when keyword
argument already had a value assigned. Eliminate duplicate clearing
of argument value. When current positional argument matches parameter
of vararg type, assign to it all the remaining arguments. Issue error
when required parameter does not have value.
(free_macro): Use del_formal.
(expand_irp): Initialize formal type. Free buffers associated with
formal prior to returning.
* macro.h (struct formal_struct): Add new field 'type' with new
enumeration type 'formal_type'.
* doc/as.texinfo: Document macro parameter qualifiers.
* NEWS: Mention new functionality.
gas/testsuite/
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add check for bad qualifier specification.
* gas/macros/badarg.l: Adjust.
* gas/macros/vararg.[sd]: New.
* gas/macros/macros.exp: Run new test.
2005-05-06 Jan Beulich <jbeulich@novell.com>
* gas/macros/dot.s: Don't use pseudo-ops in first column.
* gas/macros/dot.l: Match broader range of possible outputs.
* gas/macros/purge.l: Likewise.
* gas/macros/purge.s: Start generated macro names with an underscore.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
gas/testsuite/
* lib/gas-defs.exp (regexp_diff): Pass test if last line is "#...".
ld/testsuite/
* lib/ld-lib.exp (regexp_diff): Pass test if last line is "#...".
* ld-elfweak/elfweak.exp: Run size2.d.
* ld-elfwaek/size2.d: New file.
* ld-elfwaek/size2a.s: New file.
* ld-elfwaek/size2b.s: New file.
list traversal. Use bfd_section_list_prepend.
* config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
over the section list.
* config/tc-xtensa.c (xtensa_remove_section): Delete.
(xtensa_insert_section): Delete.
(xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
and bfd_section_list_prepend.
(xtensa_reorder_seg_list): Use bfd_section_list_remove and
bfd_section_list_insert_after.
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* config/obj-multi.h (FAKE_LABEL_NAME): Defined.
* read.c (pseudo_set): Disallow symbol set to common symbol.
PR 857
* write.c (write_object_file): Report common symbol name when
disallowing local symbol set to common symbol.
(adjust_reloc_syms): Disallow local symbol set to undefined
symbol.
gas/testsuite/
2005-04-26 H.J. Lu <hongjiu.lu@intel.com>
* gas/all/assign.s: Make `x' and `y' global.
2005-04-25 Jan Beulich <jbeulich@novell.com>
* macro.c (macro_expand_body): Replace locals indicator parameters
with actual macro_entry. New local variables macro_line and err.
Don't return when encountering an error, just record the fact.
Detect local symbol name colliding with parameter. Track line number
inside of macro expansion.
(do_formals): Move local variable name to wider scope. Check
parameter of the same name doesn't already exist. In MRI mode, also
check it doesn't collide with the argument count pseudo-parameter).
(define_macro): Add file and line number parameters. Remove local
variable namestr. New local variable error. Initialize macro_entry
members file, line, and name. Don't return when encountering an
error, just record the fact. Use %s in some diagnostics for read.c
to insert the macro name. Free macro_entry on error.
(macro_expand): Pass macro_entry to macro_epand_body. Don't return
when encountering an error, just record the fact.
(expand_irp): Don't return when encountering an error, just record
the fact.
* macro.h (macro_struct): New members name, file, and line.
(define_macro): Add file and line number parameters.
* read.c (s_macro): Pass file and line to define_macro. Tag warning
regarding pseudo-op redefinition with the file/line that macro
definition started at.
gas/testsuite/
2005-04-25 Jan Beulich <jbeulich@novell.com>
* gas/macros/badarg.s: Add tests for collisions between/among macro
parameters and local symbols.
* gas/macros/badarg.l: Adjust.
(xg_is_narrow_insn, xg_expand_narrow): Remove. Merge into...
(xg_is_single_relaxable_insn): ...here. Add "targ" and "narrow_only"
parameters.
(xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.
