This functionality will generate a new GNU object attribute for the "data region"
has been added. This object attribute is used
mark whether the compiler has generated code assuming that data could be in the
upper or lower memory regions.
Code which assumes data is always in the lower memory region is incompatible
with code which uses the full memory range for data.
The patch also adds a new assembler directive ".mspabi_attribute" to handle the
existing MSPABI object attributes. GCC will now emit both .gnu_attribute and
.mspabi_attribute directives to indicate what options the source file was
compiled with.
The assembler will now check the values set in these directives against the
options that the it has been invoked with. If there is a discrepancy, the
assembler will exit with an error.
bfd * elf32-msp430.c (elf32_msp430_merge_mspabi_attributes): Rename to..
(elf32_msp430_merge_msp430_attributes): Add support for merging the GNU
object attribute for data region.
binutils* readelf.c (display_msp430_gnu_attribute): New.
(process_arch_specific): Use msp430 specific handler for GNU
attributes.
gas * config/tc-msp430.c (md_parse_option): Set lower_data_region_only to
FALSE if the data region is set to "upper", "either" or "none".
(msp430_object_attribute): New.
(md_pseudo_table): Handle .mspabi_attribute and .gnu_attribute.
(msp430_md_end): Replace hard-coded attribute values with enums.
Handle data region object attribute.
* doc/as.texi: Document MSP430 Data Region object attribute.
* doc/c-msp430.texi: Document the .mspabi_attribute directive.
* testsuite/gas/msp430/attr-430-small-bad.d: New test.
* testsuite/gas/msp430/attr-430-small-bad.l: New test.
* testsuite/gas/msp430/attr-430-small-good.d: New test.
* testsuite/gas/msp430/attr-430-small.s: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-any-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-any-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-any.s: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower-bad.l: New test.
* testsuite/gas/msp430/attr-430x-large-lower-good.d: New test.
* testsuite/gas/msp430/attr-430x-large-lower.s: New test.
* testsuite/gas/msp430/msp430.exp: Run new tests.
include * elf/msp430.h: Add enums for MSPABI and GNU object attribute tag names
and values.
ld * testsuite/ld-msp430-elf/attr-gnu-main.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-obj.s: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower-upper.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-lower.d: New test.
* testsuite/ld-msp430-elf/attr-gnu-region-upper.d: New test.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:
"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."
I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).
[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds
2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* doc/bfdint.texi: Use command-line consistently when used in a
compount word.
* doc/bfdsumm.texi: Likewise.
binutils/
* NEWS: Use command-line consistently when used in a compount word.
* doc/binutils.texi: Likewise and fix trailing whitespace on same
line.
gas/
* NEWS: Use command-line consistently when used in a compount word.
* doc/as.texi: Likewise.
* doc/c-aarch64.texi: Likewise.
* doc/c-alpha.texi: Likewise.
* doc/c-arc.texi: Likewise.
* doc/c-arm.texi: Likewise.
* doc/c-avr.texi: Likewise.
* doc/c-bfin.texi: Likewise.
* doc/c-cris.texi: Likewise.
* doc/c-epiphany.texi: Likewise.
* doc/c-i386.texi: Likewise.
* doc/c-ia64.texi: Likewise.
* doc/c-lm32.texi: Likewise.
* doc/c-m32r.texi: Likewise.
* doc/c-m68k.texi: Likewise.
* doc/c-mips.texi: Likewise.
* doc/c-mmix.texi: Likewise.
* doc/c-msp430.texi: Likewise.
* doc/c-mt.texi: Likewise.
* doc/c-nios2.texi: Likewise.
* doc/c-ppc.texi: Likewise.
* doc/c-pru.texi: Likewise.
* doc/c-rl78.texi: Likewise.
* doc/c-rx.texi: Likewise.
* doc/c-tic6x.texi: Likewise.
* doc/c-v850.texi: Likewise.
* doc/c-vax.texi: Likewise.
* doc/c-visium.texi: Likewise.
* doc/c-xstormy16.texi: Likewise.
* doc/c-xtensa.texi: Likewise.
* doc/c-z80.texi: Likewise.
* doc/c-z8k.texi: Likewise.
* doc/internals.texi: Likewise.
gprof/
* gprof.texi: Use command-line consistently when used in a compount
word.
ld/
* NEWS: Use command-line consistently when used in a compount word.
* ld.texinfo: Likewise.
* ldint.texinfo: Likewise.
* config/tc-msp430.c (OPTION_WARN_INTR_NOPS): Use y instead of z.
(OPTION_NO_WARN_INTR_NOPS): Use Y instead of Z.
* doc/c-msp430.texi: Update command line option description.
* gas/msp430/bad.d: Use -my not -mz.
generate warning messages about an instruction that changes the interrupt
state not being followed by a NOP instruction.
* config/msp430/msp430.c: Replace known mcu array with known
msp430 ISA mcu name array.
Accept any name for -mmcu option.
Add -mz option to warn about missing NOP following an interrupt
status change.
(check_for_nop): New.
(msp430_operands): Emit a warning, if requested, when an interrupt
changing instruction is not followed by a NOP.
* doc/c-msp430.c: Document -mz option.
* gas/msp430/bad.d: Add -mz option.
* gas/msp430/bad.s: Add more cases where warnings should be
generated.
* gas/msp430/bad.l: Add expected warning messages.
* config/tc-msp430.c (msp430_refsym): New: ".refsym <symbol>"
* doc/c-msp430.texi (MSP430 Directives): Document it.
The purpose of this patch is to provide a way for one object file
to require the inclusion of another object, without having to
allocate space for a .word address reference.
(OPTION_INTR_NOPS): Define.
(gen_interrupt_nops): Default to FALSE.
(md_parse_opton): Add support for OPTION_INTR_NOPS.
(md_longopts): Add -mn.
(md_show_usage): Add -mn.
(msp430_operands): Generate NOPs for all MCUs not just 430Xv2.
* doc/c-msp430.c: Document -mn.
(move_data): New variable.
(md_parse_option): Parse -md.
(msp430_section): New function. Catch references to the .bss or
.data sections and generate a special symbol for use by the libcrt
library.
(md_pseudo_table): Intercept .section directives.
(md_longopt): Add -md
(md_show_usage): Likewise.
(msp430_operands): Generate a warning message if a NOP is inserted
into the instruction stream.
* doc/c-msp430.texi (node MSP430 Options): Document -md option.
Add -mcpu command to specify core type.
* doc/c-msp430.c: Update documentation.
* gas/msp430/opcodes.s: Use correct value for .arch pseudo.
* gas/msp430/msp430x.d: Use correct value for -mcpu option.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config/tc-msp430.c (msp430_enable_relax): New flag.
(msp430_enable_polys): Likewise.
(OPTION_RELAX): New option.
(OPTION_POLYMORPHS): Likewise.
(md_longopts): New long options.
(md_show_usage): Updated.
(md_parse_option): Add new options handler.
(msp430_operands): Add check if polymorph insns are enabled.
(msp430_force_relocation_local): New function.
(md_apply_fix): Now delete relocs according to new flags combination.
(msp430_relax_frag): Convert long branches to short branches only if
flag msp430_enable_relax is set.
* config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
(msp430_force_relocation_local): Likewise.
* doc/c-msp430.texi: Describe new options.
