bfd_set_section_alignment currently always returns true. This patch
changes it to return false on silly alignment values, avoiding yet
another way to trigger ubsan errors like coffcode.h:3192:12: runtime
error: shift exponent 299 is too large for 32-bit type 'int'. We'll
catch that one in objcopy.c:setup_sections. However, setup_sections
gives up on other setup operations that are necessary even after an
error of some sort. Change that to keep going, which might change the
error message but that shouldn't matter in the least.
bfd/
* section.c (bfd_set_section_alignment): Return false and
don't set alignment_power for stupidly large alignments.
* bfd-in2.h: Regenerate.
* coffcode.h (coff_compute_section_file_positions): Don't use
an int constant when calculating alignment.
binutils/
* objcopy.c (setup_section): Keep on going after hitting
non-fatal errors.
PR 29389
bfd * bfd.c (BFD_CLOSED_BY_CACHE): New bfd flag.
* cache.c (bfd_cache_delete): Set BFD_CLOSED_BY_DELETE on the
closed bfd.
(bfd_cache_lookup_worker): Clear BFD_CLOSED_BY_DELETE on the newly
reopened bfd.
* opncls.c (bfd_set_filename): Refuse to change the name of a bfd
that has been closed by bfd_cache_delete. Mark changed bfds as
uncacheable.
* bfd-in2.h: Regenerate.
ld * ldlang.h (lang_input_statement_struct): Add sort_key field.
* emultempl/pe.em (after_open): If multiple import libraries refer
to the same bfd, store their names in the sort_key field.
* emultempl/pep.em (after_open): Likewise.
* ldlang.c (sort_filename): New function. Returns the filename to
be used when sorting input files.
(wild_sort): Use the sort_filename function.
These two macros print either a 16 digit hex number or an 8 digit
hex number. Unfortunately they depend on both target and host, which
means that the output for 32-bit targets may be either 8 or 16 hex
digits.
Replace them in most cases with code that prints a bfd_vma using
PRIx64. In some cases, deliberately lose the leading zeros.
This change some output, notably in base/offset fields of m68k
disassembly which I think looks better that way, and in error
messages. I've kept leading zeros in symbol dumps (objdump -t)
and in PE header dumps.
bfd/
* bfd-in.h (fprintf_vma, sprintf_vma, printf_vma): Delete.
* bfd-in2.h: Regenerate.
* bfd.c (bfd_sprintf_vma): Don't use sprintf_vma.
(bfd_fprintf_vma): Don't use fprintf_vma.
* coff-rs6000.c (xcoff_reloc_type_tls): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(xcoff_ppc_relocate_section): Likewise.
* cofflink.c (_bfd_coff_write_global_sym): Likewise.
* mmo.c (mmo_write_symbols_and_terminator): Likewise.
* srec.c (srec_write_symbols): Likewise.
* elf32-xtensa.c (print_r_reloc): Similarly for fprintf_vma.
* pei-x86_64.c (pex64_dump_xdata): Likewise.
(pex64_bfd_print_pdata_section): Likewise.
* som.c (som_print_symbol): Likewise.
* ecoff.c (_bfd_ecoff_print_symbol): Use bfd_fprintf_vma.
opcodes/
* dis-buf.c (perror_memory, generic_print_address): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* i386-dis.c (print_operand_value, print_displacement): Likewise.
* m68k-dis.c (print_base, print_indexed): Likewise.
* ns32k-dis.c (print_insn_arg): Likewise.
* ia64-gen.c (_opcode_int64_low, _opcode_int64_high): Delete.
(opcode_fprintf_vma): Delete.
(print_main_table): Use PRIx64 to print opcode.
binutils/
* od-macho.c: Replace all uses of printf_vma with bfd_printf_vma.
* objcopy.c (copy_object): Don't use sprintf_vma. Instead use
PRIx64 to print bfd_vma values.
(copy_main): Likewise.
* readelf.c (CHECK_ENTSIZE_VALUES): Likewise.
(dynamic_section_mips_val): Likewise.
(print_vma): Don't use printf_vma. Instead use PRIx64 to print
bfd_vma values.
(dump_ia64_vms_dynamic_fixups): Likewise.
(process_version_sections): Likewise.
* rddbg.c (stab_context): Likewise.
gas/
* config/tc-i386.c (offset_in_range): Don't use sprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(md_assemble): Likewise.
* config/tc-mips.c (load_register, macro): Likewise.
* messages.c (as_internal_value_out_of_range): Likewise.
* read.c (emit_expr_with_reloc): Likewise.
* config/tc-ia64.c (note_register_values): Don't use fprintf_vma.
Instead use PRIx64 to print bfd_vma values.
(print_dependency): Likewise.
* listing.c (list_symbol_table): Use bfd_sprintf_vma.
* symbols.c (print_symbol_value_1): Use %p to print pointers.
(print_binary): Likewise.
(print_expr_1): Use PRIx64 to print bfd_vma values.
* write.c (print_fixup): Use %p to print pointers. Don't use
fprintf_vma.
* testsuite/gas/all/overflow.l: Update expected output.
* testsuite/gas/m68k/mcf-mov3q.d: Likewise.
* testsuite/gas/m68k/operands.d: Likewise.
* testsuite/gas/s12z/truncated.d: Likewise.
ld/
* deffilep.y (def_file_print): Don't use fprintf_vma. Instead
use PRIx64 to print bfd_vma values.
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Don't use
sprintf_vma. Instead use PRIx64 to print bfd_vma values.
* emultempl/pe.em (gld${EMULATION_NAME}_finish): Likewise.
* ldlang.c (lang_map): Use %V to print region origin.
(lang_one_common): Don't use sprintf_vma.
* ldmisc.c (vfinfo): Don't use fprintf_vma or sprintf_vma.
* pe-dll.c (pe_dll_generate_def_file): Likewise.
gdb/
* remote.c (remote_target::trace_set_readonly_regions): Replace
uses of sprintf_vma with bfd_sprintf_vma.
There is a problem with my commit 0e3c1eebb2, which replaced
bfd_uint64_t with uint64_t: Some hosts typedef int64_t to long long
even when long is the same size as long long. That confuses the code
choosing one of "l", "ll", or "I64" for BFD_VMA_FMT, and results in
warnings.
Write a direct configure test for the printf int64_t style instead.
This removes the last use of BFD_HOST_64BIT_LONG, so delete that.
Note that the changes to configure.com are pure guesswork.
PR 29348
* bfd-in.h (BFD_HOST_64BIT_LONG): Don't define.
(BFD_VMA_FMT): Define using BFD_INT64_FMT when 64-bit.
(bfd_vma, bfd_signed_vma): Move comments to 64-bit typedefs.
* configure.ac (BFD_HOST_64BIT_LONG): Delete.
(BFD_INT64_FMT): New config test.
* configure.com: Update similarly.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
Some R_LARCH_64 in section .eh_frame will to generate
R_LARCH_NONE, we change relocation to R_LARCH_32_PCREL
from R_LARCH_64 in setction .eh_frame and not generate
dynamic relocation for R_LARCH_32_PCREL.
Add New relocate type R_LARCH_32_PCREL for .eh_frame.
include/elf/
loongarch.h
bfd/
bfd/bfd-in2.h
libbfd.h
reloc.c
elfxx-loongarch.c
elfnn-loongarch.c
gas/config/
tc-loongarch.c
binutils/
readelf.c
ld/testsuite/ld-elf/
eh5.d
Commit 04f096fb9e ("Move the xc16x target to the obsolete list") moved
the architecture from the "obsolete but still available" to the
"obsolete / support removed" list in config.bfd, making the architecture
impossible to enable (except maybe via "enable everything" options").
Note that I didn't touch */po/*.po{,t} on the assumption that these
would be updated by some (half)automatic means.
MIPS should not be using BFD_RELOC_16 for its R_MIPS_16 relocation,
since R_MIPS_16 specifies a 16-bit field in a 32-bit word.
BFD_RELOC_16, emitted by generic code to handle fixups on 16-bit data
directives, expects fixups to operate on the whole of a 16-bit word.
This patch corrects the problem by using BFD_RELOC_MIPS_16, a new bfd
reloc that is used to generate R_MIPS_16. BFD_RELOC_16 is handled in
md_apply_fix for cases where the fixup can be applied at assembly
time. Like BFD_RELOC_8, BFD_RELOC_16 now has no corresponding object
file relocation, and thus .half, .hword, .short and .dc.w must be
resolved at assembly time. BFD_RELOC_MIPS_REL16 is removed by this
patch since it isn't used.
PR 3243
PR 26542
* reloc.c (BFD_RELOC_MIPS_16): Rename from BFD_RELOC_MIPS_REL16.
* elf32-mips.c (mips_reloc_map): Map BFD_RELOC_MIPS_16 to R_MIPS_16.
* elf64-mips.c (mips_reloc_map): Likewise, delete BFD_RELOC_MIPS_REL16.
* elfn32-mips.c (mips_reloc_map): Likewise.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-mips.c (append_insn): Handle BFD_RELOC_MIPS_16.
(macro_build): Likewise.
(mips_percent_op <%half>): Generate BFD_RELOC_MIPS_16.
(md_apply_fix): Handle BFD_RELOC_16 and BFD_RELOC_MIPS_16 when fx_done.
ld/
* testsuite/ld-mips-elf/reloc-local-overflow.d,
* testsuite/ld-mips-elf/reloc-local-overflow.s: Rewrite.
I expect the encoded reloc.size field originally came from aout
r_length ecoding, but somehow went wrong for 64-bit relocs (which
should have been encoded as 3). Toss all that out, just use a byte
size instead. The changes outside of reloc.c in this patch should
make the code independent of how reloc.size is encoded.
* reloc.c (struct reloc_howto_struct): Increase size field by
one bit. Comment.
(HOWTO_RSIZE): Don't encode size.
(bfd_get_reloc_size): Adjust, and make it an inline function.
(read_reloc, write_reloc): Adjust.
* bfd-in2.h: Regenerate.
* aout-ns32k.c: Include libbfd.h.
(put_reloc): Don't use howto->size directly. Calculate r_length
using bfd_log2 and bfd_get_reloc_size.
* aoutx.h (swap_std_reloc_out): Likewise.
(aout_link_reloc_link_order): Likewise.
* i386lynx.c (swap_std_reloc_out
* mach-o-i386.c (bfd_mach_o_i386_swap_reloc_out
* pdp11.c (aout_link_reloc_link_order
* coff-arm.c (coff_arm_reloc): Don't use howto->size directly,
use bfd_get_reloc_size instead and adjust switch cases.
* coff-i386.c (coff_i386_reloc): Similarly.
* coff-x86_64.c (coff_amd64_reloc): Likewise.
* cpu-ns32k.c (do_ns32k_reloc): Likewise.
* elf32-arc.c (arc_do_relocation): Likewise.
* elf32-arm.c (elf32_arm_final_link_relocate): Likewise.
* elf32-bfin.c (bfin_bfd_reloc): Likewise.
* elf32-cr16.c (cr16_elf_final_link_relocate): Likewise.
* elf32-cris.c (cris_elf_pcrel_reloc): Likewise.
* elf32-crx.c (crx_elf_final_link_relocate): Likewise.
* elf32-csky.c (csky_elf_relocate_section): Likewise.
* elf32-d10v.c (extract_rel_addend, insert_rel_addend): Likewise.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf32-m32r.c (m32r_elf_generic_reloc): Likewise.
* elf32-nds32.c (nds32_elf_generic_reloc): Likewise.
* syms.c (_bfd_stab_section_find_nearest_line): Likewise.
* coff-rs6000.c (xcoff_ppc_relocate_section): Adjust howto.size.
* coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise.
bfd_hostptr_t is defined as a type large enough to hold either a long
or a pointer. It mostly appears in the coff backend code in casts.
include/coff/internal.h struct internal_syment and union
internal_auxent have the only uses in data structures, where
comparison with include/coff/external.h and other code reveals that
the type only needs to be large enough for a 32-bit integer or a
pointer. That should mean replacing with uintptr_t is OK.
Requiring C99 means that uses of bfd_uint64_t can be replaced with
uint64_t, and similarly for bfd_int64_t, BFD_HOST_U_64_BIT, and
BFD_HOST_64_BIT. This patch does that, removes #ifdef BFD_HOST_*
and tidies a few places that print 64-bit values.
For better packing on 64-bit hosts.
* section.c (struct bfd_section): Move next and prev field earlier.
Move alignment_power later.
(BFD_FAKE_SECTION): Adjust to suit.
* bfd-in2.h: Regenerate.
bfd * coff-i386.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_i386_relocation_section): Add support for R_SECTION.
(coff_i386_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* coff-x86_64.c (in_reloc_p): Add R_SECTION.
(howto_table): Add R_SECTION.
(coff_pe_amd64_relocation_section): Add support for R_SECTION.
(coff_amd64_reloc_type_lookup): Add support for
BFD_RELOC_16_SECCIDX.
* reloc.c: Add BFD_RELOC_16_SECIDX.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas * config/tc-i386.c (pe_directive_secidx): New function.
(md_pseudo_table): Add support for secidx.
(x86_cons_fix_new): Likewise.
(tc_gen_reloc): Likewise.
* expr.c (op_rank): Add O_secidx.
* expr.h (operatorT): Likewise.
* symbols.c (resolve_symbol_value): Add support for O_secidx.
* testsuite/gas/i386/secidx.s: New test source file.
* testsuite/gas/i386/secidx.d: New test driver file.
* testsuite/gas/i386/i386.exp: Run new test.
include * coff/i386.h: Define R_SECTION.
* coff/x86_64.h: Likewise.
ld * testsuite/ld-pe/secidx1.s: New test source file.
* testsuite/ld-pe/secidx2.s: New test source file.
* testsuite/ld-pe/secidx.d: New test driver file.
* testsuite/ld-pe/secidx_64.d: New test driver file.
* testsuite/ld-pe/pe.exp: Add new tests.
Target specific data shouldn't be put in struct bfd_section.
* section.c (struct bfd_section): Delete relax and relax_count.
(BFD_FAKE_SECTION): Adjust to suit.
(struct relax_table): Move to..
* elf32-microblaze.c (struct relax_table): ..here.
(struct _microblaze_elf_section_data): New.
(microblaze_elf_section_data): Define.
(microblaze_elf_new_section_hook): New function.
(bfd_elf32_new_section_hook): Define.
(calc_fixup): Return a size_t. Adjust to suit new location of
relax and relax_count.
(microblaze_elf_relax_section): Adjust to suit new location of
relax and relax_count. Make some variables size_t.
* bfd-in2.h: Regenerate.
Add support for the AMDGCN architecture to BFD.
This is the bare minimum to get
$ ./configure --target=amdgcn-hsa-amdhsa --disable-gas
$ make all-binutils
working later in this series.
The specific AMDGCN models added here are a bit arbitrary, based on
what we intend to initially support in GDB. This list will need to be
updated in the future anyway. The complete up-to-date list of existing
AMDGPU models can be found here:
https://llvm.org/docs/AMDGPUUsage.html#processors
The ELF format for this architecture is documented here:
https://llvm.org/docs/AMDGPUUsage.html#elf-code-object
The flags for the "HSA" OS ABI are properly versioned and documented on
that page. But the NONE, PAL and MESA3D OS ABIs are not well documented
nor versioned. Taking a peek at the LLVM source code, we see that they
encode their flags the same way as HSA v3. For example, for PAL:
c8b614cd74/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp (L601)
So at least, we know that all AMDGPU objects (of which AMDGCN objects
are a subset of) at the time of writing encode the specific GPU model in
the EF_AMDGPU_MACH field of e_flags.
bfd/ChangeLog:
* Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES):
Add cpu-amdgcn.c.
(BFD64_BACKENDS): Add elf64-amdgcn.lo.
(BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c.
* Makefile.in: Re-generate.
* cpu-amdgcn.c: New.
* elf64-amdgcn.c: New.
* archures.c (bfd_architecture): Add bfd_arch_amdgcn and related
mach defines.
(bfd_amdgcn_arch): New.
(bfd_archures_list): Add bfd_amdgcn_arch.
* bfd-in2.h: Re-generate.
* config.bfd: Handle amdgcn* target.
* configure.ac: Handle amdgcn_elf64_le_vec.
* configure: Re-generate.
* elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA.
* targets.c (amdgcn_elf64_le_vec): New.
(_bfd_target_vector): Add amdgcn_elf64_le_vec.
include/ChangeLog:
* elf/amdgpu.h: New.
* elf/common.h (ELFOSABI_AMDGPU_HSA): Add.
Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
"DO NOT EDIT!" says the comment at the top of bfd-in2.h. Move the new
type field where it belongs.
PR ld/28841
* section.c (struct bfd_section): Add type. Formatting.
(BFD_FAKE_SECTION): Formatting.
* bfd-in2.h: Regenerate.
Now that ld properly aligns the end of the relro segment, the hack to
make relro work on powerpc can disappear.
bfd/
* bfd.c (bfd_emul_get_commonpagesize): Remove relro param.
Don't return bed->relropagesize.
* elf-bfd.h (struct elf_backend_data): Remove relropagesize.
* elfxx-target.h (ELF_RELROPAGESIZE): Remove.
* elf32-ppc.c (ELF_RELROPAGESIZE): Don't define.
* elf64-ppc.c: Likewise.
* bfd-in2.h: Regenerate.
ld/
* ldemul.c (after_parse_default): Adjust
bfd_emul_get_commonpagesize call.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
No need to use anything fancy, plain inline works just as well.
* bfd-in.h (INLINE): Don't define.
* bfd-in2.h: Regenerate.
* aoutx.h: Replace use of INLINE with inline.
* elf-eh-frame.c: Likewise.
* elf32-score7.c: Likewise.
* elfxx-mips.c: Likewise.
* ihex.c: Likewise.
* mach-o.c: Likewise.
* mmo.c: Likewise.
Sometimes the investigation of a fuzzing bug report leads into areas
you'd rather not go. In this instance by the time I'd figured out the
real cause was a target variant that had never been properly supported
in binutils, the time needed to fix it was less than the time needed
to rip it out.
* coffcode.h (coff_set_alignment_hook): Call bfd_coff_swap_reloc_in
not coff_swap_reloc_in.
(coff_slurp_reloc_table): Likewise. Don't use RELOC type.
(ticoff0_swap_table): Use coff_swap_reloc_v0_out and
coff_swap_reloc_v0_in.
* coffswap.h (coff_swap_reloc_v0_in, coff_swap_reloc_v0_out): New.
* coff-tic54x.c (tic54x_lookup_howto): Don't abort.
* coffgen.c (coff_get_normalized_symtab): Use PTR_ADD.
* bfd-in.h (PTR_ADD, NPTR_ADD): Avoid warnings when passing an
expression.
* bfd-in2.h: Regenerate.
This defines a couple of macros used to avoid ubsan complaints about
calculations involving NULL pointers. PTR_ADD should be used in the
case where it is known that the offset is always zero with a NULL
pointer, and you'd like to know if a non-zero offset is ever used.
NPTR_ADD should be rarely used, but is defined for cases where a
non-zero offset is expected and should be ignored if the pointer is
NULL.
bfd/
* bfd-in.h (PTR_ADD, NPTR_ADD): Define.
* bfd-in2.h: Regenerate.
* elf-eh-frame.c (adjust_eh_frame_local_symbols): Avoid NULL
pointer calculations.
* elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): Likewise.
(bfd_elf_add_dt_needed_tag, elf_finalize_dynstr): Likewise.
(elf_link_add_object_symbols, elf_link_input_bfd): Likewise.
(bfd_elf_final_link, bfd_elf_gc_record_vtinherit): Likewise.
binutils/
* objdump.c (disassemble_section): Use PTR_ADD for rel_ppend.
This change adds an external-visible wrapper for the _bfd_set_gp_value
function. This is a prerequisite for some gdb patches that better
handle powerpc64le relocations against ".TOC.".
* bfd.c (bfd_set_gp_value): New externally visible wrapper
for _bfd_set_gp_value.
* bfd-in2.h: Regenerate.
When link_info.keep_memory is true, linker caches the relocation
information and symbol tables of input files in memory. When there
are many input files with many relocations, we may run out of memory.
Add --max-cache-size=SIZE to set the maximum cache size.
bfd/
PR ld/18028
* bfd.c (bfd): Add alloc_size.
* elf-bfd.h (_bfd_elf_link_info_read_relocs): New.
* elf32-i386.c (elf_i386_check_relocs): Use _bfd_link_keep_memory.
Update cache_size.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (_bfd_elf_link_read_relocs): Renamed to ...
(_bfd_elf_link_info_read_relocs): This. Update cache_size.
(_bfd_elf_link_read_relocs): New.
(_bfd_elf_link_check_relocs): Call _bfd_elf_link_info_read_relocs
instead of _bfd_elf_link_read_relocs.
(elf_link_add_object_symbols): Likewise.
(elf_link_input_bfd): Likewise.
(init_reloc_cookie_rels): Likewise.
(init_reloc_cookie): Update cache_size. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(link_info_ok): New.
(elf_gc_smash_unused_vtentry_relocs): Updated. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(bfd_elf_gc_sections): Use link_info_ok. Pass &link_info_ok
to elf_gc_smash_unused_vtentry_relocs.
* libbfd-in.h (_bfd_link_keep_memory): New.
* linker.c (_bfd_link_keep_memory): New.
* opncls.c (bfd_alloc): Update alloc_size.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
include/
PR ld/18028
* bfdlink.h (bfd_link_info): Add cache_size and max_cache_size.
ld/
PR ld/18028
* NEWS: Mention --max-cache-size=SIZE.
* ld.texi: Document --max-cache-size=SIZE.
* ldlex.h (option_values): Add OPTION_MAX_CACHE_SIZE.
* ldmain.c: (main): Set link_info.max_cache_size to -1.
* lexsup.c (ld_options): Add --max-cache-size=SIZE.
(parse_args): Support OPTION_MAX_CACHE_SIZE.
* testsuite/ld-bootstrap/bootstrap.exp: Add test for
--max-cache-size=-1.
Linker plugin_object_p opens the IR archive for each IR archive member.
For GCC plugin, plugin_object_p closes the archive file descriptor. But
for LLVM plugin, the archive file descriptor remains open. If there are
3000 IR archive members, there are 3000 file descriptors for them. We
can run out of file descriptors petty easily.
1. Add archive_plugin_fd and archive_plugin_fd_open_count to bfd so that
we can cache and reuse the IR archive file descriptor for all IR archive
members in the archive.
2. Add bfd_plugin_close_file_descriptor to properly close the IR archive
file descriptor.
bfd/
PR ld/28040
* archive.c (_bfd_archive_close_and_cleanup): Close the archive
plugin file descriptor if needed.
* bfd.c (bfd): Add archive_plugin_fd and
archive_plugin_fd_open_count.
* opncls.c (_bfd_new_bfd): Initialize to -1.
* plugin.c (bfd_plugin_open_input): Cache and reuse the archive
plugin file descriptor.
(bfd_plugin_close_file_descriptor): New function.
(try_claim): Call bfd_plugin_close_file_descriptor.
* plugin.h (bfd_plugin_close_file_descriptor): New.
* bfd-in2.h: Regenerated.
ld/
PR ld/28040
* plugin.c (plugin_input_file): Add ibfd.
(release_plugin_file_descriptor): New function.
(release_input_file): Call release_plugin_file_descriptor to
close input->fd.
(plugin_object_p): Call release_plugin_file_descriptor to close
input->fd. Also call release_plugin_file_descriptor if not
claimed.
* testsuite/config/default.exp (RANLIB): New.
* testsuite/ld-plugin/lto.exp: Run ranlib test.
The gotha() relocation mnemonic will be outputted by OpenRISC GCC when
using the -mcmodel=large option. This relocation is used along with
got() to generate 32-bit GOT offsets. This increases the previous GOT
offset limit from the previous 16-bit (64K) limit.
This is needed on large binaries where the GOT grows larger than 64k.
bfd/ChangeLog:
PR 21464
* bfd-in2.h: Add BFD_RELOC_OR1K_GOT_AHI16 relocation.
* elf32-or1k.c (or1k_elf_howto_table, or1k_reloc_map): Likewise.
(or1k_final_link_relocate, or1k_elf_relocate_section,
or1k_elf_check_relocs): Likewise.
* libbfd.h (bfd_reloc_code_real_names): Likewise.
* reloc.c: Likewise.
cpu/ChangeLog:
PR 21464
* or1k.opc (or1k_imm16_relocs, parse_reloc): Define parse logic
for gotha() relocation.
include/ChangeLog:
PR 21464
* elf/or1k.h (elf_or1k_reloc_type): Define R_OR1K_GOT_AHI16 number.
opcodes/ChangeLog:
PR 21464
* or1k-asm.c: Regenerate.
gas/ChangeLog:
PR 21464
* testsuite/gas/or1k/reloc-1.s: Add test for new relocation.
* testsuite/gas/or1k/reloc-1.d: Add test result for new
relocation.
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
fixup reloc, add tests
Certain library headers and functions are required by C99. This
removes configure tests for them. The patch also removes AC_ISC_POSIX
and AC_HEADER_DIRENT, which the autoconf manual states are obsolescent.
sys/time.h is no longer tangled up with time.h so it can be handled by
the gprof configure.
* configure.ac: Don't check for long long or long double type.
Don't check for alloca.h, limits.h, stddef.h, stdlib.h, string.h,
strings.h, time.h, wchar.h, wctype.h or sys/time.h. Don't check
for strtoull, free, malloc, realloc, getenv, strstr, snprintf,
vsnprintf, strlen or setitimer. Sort AC_CHECK_DECLS.
(AC_ISC_POSIX): Don't invoke.
(AC_HEADER_TIME, AC_HEADER_DIRENT, ACX_HEADER_STRING): Likewise.
* sysdep.h: Remove many HAVE_*_H checks and fallback declarations.
Do test HAVE_SYS_TYPES_H. Don't include sys/time.h. Reorder
header order as per automake AC_INCLUDES_DEFAULT.
* bfd-in.h: Include inttypes.h unconditionally.
* bfd.c (_bfd_doprnt, _bfd_doprnt_scan): Assume long long and
long double are available.
(bfd_scan_vma): Assume long long and strtoull are available.
* elflink.c: Include limits.h unconditionally.
* elfnn-riscv.c: Likewise.
* wasm-module.c: Likewise.
* hpux-core.c: Include dirent.h unconditionally.
* trad-core.c: Likewise.
* hosts/x86-64linux.h: Include stdlib.h unconditionally.
* peXXigen.c: Remove HAVE_WCHAR_H and HAVE_WCTYPE_H checks.
* elf32-m68hc1x.c: Don't include alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* wasm-module.c: Likewise.
* xsym.c: Likewise.
* bfd-in2.h: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
With this in place we can retire bfd_boolean one project at a time.
bfd/
* bfd-in.h: Include stdbool.h.
(bfd_boolean): Define as bool
* bfd-in2.h: Regenerate.
This fixes the issue that startswith depends on strncpy being
declared, and not all projects using bfd.h include string.h before
bfd.h. I've also deleted some macros that don't find much use
anywhere.
bfd/
* bfd-in.h: Include string.h.
(LITMEMCPY, LITSTRCPY): Delete.
* bfd-in2.h: Regenerate.
binutils/
* prdbg.c (pr_function_type): Replace LITSTTCPY with strcpy.
bfd/
* bfd-in.h (startswith): New inline.
(CONST_STRNEQ): Use startswith.
* bfd-in2.h: Regenerate.
gdbsupport/
* common-utils.h (startswith): Delete version now supplied by bfd.h.
libctf/
* ctf-impl.h: Include string.h.
Add support for TLS in XCOFF. Amongst the things done by this commit:
- Update XCOFF auxialiary header to match new version and allow TLS
sections.
- Add TLS sections (.tdata and .tbss) support in gas and ld.
- Add support for the TLS relocations in gas and ld.
Two different types BFD_RELOC are created for PPC and PPC64 as
the size is a pointer, thus distinct in 32 or 64bit.
The addresses given by ld to .tdata and .tbss is a bit special. In
XCOFF, these addresses are actually offsets from the TLS pointer
computed at runtime. AIX assembly and linker does the same. In
top of that, the .tdata must be before .data (this is mandatory for AIX
loader). Thus, the aix ld script is recomputing "." before .data to restore
its original value. There might be a simpler way, but this one is working.
Optimisation linked to TLS relocations aren't yet implemented.
bfd/
* reloc.c (BFD_RELOC_PPC_TLS_LE, BFD_RELOC_PPC_TLS_IE,
BFD_RELOC_PPC_TLS_M, BFD_RELOC_PPC_TLS_ML, BFD_RELOC_PPC64_TLS_GD,
BFD_RELOC_PPC64_TLS_LD, BFD_RELOC_PPC64_TLS_LE,
BFD_RELOC_PPC64_TLS_IE, BFD_RELOC_PPC64_TLS_M,
BFD_RELOC_PPC64_TLS_ML): New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_tls for TLS relocations.
(xcoff_howto_table): Implement TLS relocations.
(_bfd_xcoff_reloc_type_lookup): Add cases TLS relocations.
(xcoff_reloc_type_tls): New function.
* coff64-rs6000.c (xcoff_calculate_relocation): Likewise.
(xcoff_howto_table): Likewise.
(_bfd_xcoff_reloc_type_lookup): Likewise.
* coffcode.h (sec_to_styp_flags): Handle TLS sections.
(styp_to_sec_flags): Likewise.
(coff_compute_section_file_positions): Avoid file offset
optimisation for .data when the previous section is .tdata.
(coff_write_object_contents): Handle TLS sections.
* coffswap.h (coff_swap_aouthdr_out): Add support for
new fields in aouthdr.
* libxcoff.h (xcoff_reloc_type_tls): Add prototype.
* xcofflink.c (xcoff_link_add_symbols): Handle XMC_UL.
(xcoff_need_ldrel_p): Add cases for TLS relocations.
(xcoff_create_ldrel): Add l_symndx for TLS sections.
gas/
* config/tc-ppc.c (ppc_xcoff_text_section, ppc_xcoff_data_section,
(ppc_xcoff_bss_section, ppc_xcoff_tdata_section,
(ppc_xcoff_tbss_section): New variables.
(ppc_text_subsegment, ppc_text_csects, ppc_data_subgments,
(ppc_data_csects): Removed.
(ppc_xcoff_section_is_initialized, ppc_init_xcoff_section,
ppc_xcoff_parse_cons): New functions.
(md_being): Initialize XCOFF sections.
(ppc_xcoff_suffix): Add support for TLS relocations
(fixup_size, md_apply_fix): Add support for new BFD_RELOC.
(ppc_change_csect): Handle XMC_TL, XMC_UL. Correctly, add XMC_BS
to .bss section. Handle new XCOFF section variables.
(ppc_comm): Likewise.
(ppc_toc): Likewise.
(ppc_symbol_new_hook): Likewise.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Add tbss support.
* config/tc-ppc.h (TC_PARSE_CONS_EXPRESSION): New define.
(ppc_xcoff_parse_cons): Add prototype.
(struct ppc_xcoff_section): New structure.
ld/
* emultempl/aix.em: Ensure .tdata section is removed
if empty, even with -r flag.
* scripttempl/aix.sc: Handle TLS sections.
* testsuite/ld-powerpc/aix52.exp: Add new tests.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: New test.
* testsuite/ld-powerpc/aix-tls-reloc.ex: New test.
* testsuite/ld-powerpc/aix-tls-reloc.s: New test.
* testsuite/ld-powerpc/aix-tls-section-32.d: New test.
* testsuite/ld-powerpc/aix-tls-section-64.d: New test.
* testsuite/ld-powerpc/aix-tls-section.ex: New test.
* testsuite/ld-powerpc/aix-tls-section.s: New test.
include/
* coff/internal.h (struct internal_aouthdr): Add new fields.
* coff/rs6000.h (AOUTHDRÃ): Add new fields.
* coff/rs6k64.h (struct external_filehdr): Likewise.
* coff/xcoff.h (_TDATA), _TBSS): New defines
(RS6K_AOUTHDR_TLS_LE, RS6K_AOUTHDR_RAS, RS6K_AOUTHDR_ALGNTDATA,
RS6K_AOUTHDR_SHR_SYMTAB, RS6K_AOUTHDR_FORK_POLICY,
RS6K_AOUTHDR_FORK_COR): New defines.
(XMC_TU): Removed.
(XMC_UL): New define.
Implement support for largetoc on XCOFF.
R_TOCU and R_TOCL are referenced by the new BFD defines:
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
A new toc storage class is added XMC_TE.
In order to correctly handle R_TOCU, the logic behind
xcoff_reloc_type_toc is changed to compute the whole TOC offset
instead of just the difference between the "link" offset and the
"assembly" offset.
In gas, add a function to transform addis format used by AIX
"addis RT, D(RA)" into the ELF format "addis RT, RA, SI".
bfd/
* reloc.c (BFD_RELOC_PPC_TOC16_HI, BFD_RELOC_PPC_TOC16_LO):
New relocations.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* coff-rs6000.c (xcoff_calculate_relocation): Call
xcoff_reloc_type_toc for R_TOCU and R_TOCL.
(xcoff_howto_table): Remove src_mask for TOC relocations.
Add R_TOCU and R_TOCL howtos.
(_bfd_xcoff_reloc_type_lookup): Add cases for
BFD_RELOC_PPC_TOC16_HI and BFD_RELOC_PPC_TOC16_LO.
(xcoff_reloc_type_toc): Compute the whole offset.
Implement R_TOCU and R_TOCL.
* coff64-rs6000.c (xcoff64_calculate_relocation):
Likewise.
(xcoff64_howto_table): Likewise.
(xcoff64_reloc_type_lookup): Likewise.
gas/
* config/tc-ppc.c (ppc_xcoff_suffix): New function.
(MAP, MAP32, MAP64): New macros for XCOFF.
(ppc_xcoff_fixup_addis): New function.
(ppc_is_toc_sym): Handle XMC_TE.
(fixup_size): Add cases for BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
(md_assemble): Call ppc_xcoff_fixup_addis for XCOFF.
(ppc_change_csect): Handle XMC_TE.
(ppc_tc): Enable .tc symbols to have only a XMC_TC or XMC_TE
storage class.
(ppc_symbol_new_hook): Handle XMC_TE.
(ppc_frob_symbol): Likewise.
(ppc_fix_adjustable): Likewise.
(md_apply_fix): Handle BFD_RELOC_PPC_TOC16_HI and
BFD_RELOC_PPC_TOC16_LO.
ld/
* scripttempl/aix.sc: Add .te to .data section.
* testsuite/ld-powerpc/aix52.exp: Add test structure for AIX7+.
Add aix-largetoc-1 test.
* testsuite/ld-powerpc/aix-largetoc-1-32.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1-64.d: New test.
* testsuite/ld-powerpc/aix-largetoc-1.ex: New test.
* testsuite/ld-powerpc/aix-largetoc-1.s: New test.
This moves the SHF_LINK_ORDER sorting from bfd_elf_final_link to
the linker which means generic ELF targets now support SHF_LINK_ORDER
and we cope with odd cases that require resizing of output sections.
The patch also fixes two bugs in the current implementation,
introduced by commit cd6d537c48. The pattern test used by that
commit meant that sections matching something like
"*(.IA_64.unwind* .gnu.linkonce.ia64unw.*)" would not properly sort a
mix of sections matching the two wildcards. That commit also assumed
a stable qsort.
bfd/
PR 27160
* section.c (struct bfd_section): Remove pattern field.
(BFD_FAKE_SECTION): Adjust to suit.
* bfd-in2.h: Regenerate.
* elflink.c (compare_link_order, elf_fixup_link_order): Delete.
(bfd_elf_final_link): Don't call elf_fixup_link_order.
ld/
PR 27160
* ldlang.h (lang_output_section_statement_type): Add data field.
(lang_input_section_type, lang_section_bst_type): Add pattern field.
(statement_list): Declare.
(lang_add_section): Adjust prototype.
* emultempl/aarch64elf.em: Adjust lang_add_section calls.
* emultempl/armelf.em: Likewise.
* emultempl/beos.em: Likewise.
* emultempl/cskyelf.em: Likewise.
* emultempl/hppaelf.em: Likewise.
* emultempl/m68hc1xelf.em: Likewise.
* emultempl/metagelf.em: Likewise.
* emultempl/mipself.em: Likewise.
* emultempl/mmo.em: Likewise.
* emultempl/msp430.em: Likewise.
* emultempl/nios2elf.em: Likewise.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/spuelf.em: Likewise.
* emultempl/vms.em: Likewise.
* ldelf.c: Likewise.
* ldelfgen.c: Include ldctor.h.
(struct os_sections): New.
(add_link_order_input_section, link_order_scan): New functions.
(compare_link_order, fixup_link_order): New functions.
(ldelf_map_segments): Call link_order_scan and fixup_link_order.
* ldlang.c (statement_list): Make global.
(output_section_callback_fast): Save pattern in tree node.
(lang_add_section): Add pattern parameter, save in lang_input_section.
(output_section_callback_tree_to_list): Adjust lang_add_section calls.
(lang_insert_orphan, output_section_callback): Likewise.
(ldlang_place_orphan): Likewise.
(gc_section_callback): Don't set section->pattern
* testsuite/ld-elf/pr26256-2a.d: Don't xfail generic.
* testsuite/ld-elf/pr26256-3b.d: Likewise.
* testsuite/ld-elf/pr26256-2b.d: Likewise. notarget xgate.
For non-relocatable link with SHF_LINK_ORDER inputs, allow mixed indirect
and data inputs with ordered and unordered inputs:
1. Add pattern to bfd_section for the matching section name pattern in
linker script and update BFD_FAKE_SECTION.
2. Sort the consecutive bfd_indirect_link_order sections with the same
pattern to allow linker script to overdide input section order.
3. Place unordered sections before ordered sections.
4. Change the offsets of the indirect input sections only.
bfd/
PR ld/26256
* elflink.c (compare_link_order): Place unordered sections before
ordered sections.
(elf_fixup_link_order): Add a link info argument. Allow mixed
ordered and unordered input sections for non-relocatable link.
Sort the consecutive bfd_indirect_link_order sections with the
same pattern. Change the offsets of the bfd_indirect_link_order
sections only.
(bfd_elf_final_link): Pass info to elf_fixup_link_order.
* section.c (bfd_section): Add pattern.
(BFD_FAKE_SECTION): Initialize pattern to NULL.
* bfd-in2.h: Regenerated.
gas/
PR ld/26256
* config/obj-elf.c (obj_elf_change_section): Also filter out
SHF_LINK_ORDER.
ld/
PR ld/26256
* ldlang.c (gc_section_callback): Set pattern.
* testsuite/ld-elf/pr26256-1.s: New file.
* testsuite/ld-elf/pr26256-1.t: Likewise.
* testsuite/ld-elf/pr26256-1a.d: Likewise.
* testsuite/ld-elf/pr26256-1b.d: Likewise.
* testsuite/ld-elf/pr26256-2.s: Likewise.
* testsuite/ld-elf/pr26256-2.t: Likewise.
* testsuite/ld-elf/pr26256-2a.d: Likewise.
* testsuite/ld-elf/pr26256-2b-alt.d: Likewise.
* testsuite/ld-elf/pr26256-2b.d: Likewise.
* testsuite/ld-elf/pr26256-3.s: Likewise.
* testsuite/ld-elf/pr26256-3a.d: Likewise.
* testsuite/ld-elf/pr26256-3a.t: Likewise.
* testsuite/ld-elf/pr26256-3b.d: Likewise.
* testsuite/ld-elf/pr26256-3b.t: Likewise.
