* cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
(dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
(all): Depend on rvdummy$(EXEEXT).
* cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
default off.
* cris/configure: Regenerate.
* cris/cris-sim.h (cris_have_900000xxif): Declare here.
(enum cris_interrupt_type, crisv10deliver_interrupt)
(crisv32deliver_interrupt: New declarations.
* cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
sim_events_tickn and set state-events member work_pending when it's
time for the next event.
[WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
interrupt-delivery function.
* cris/crisv10f.c (MY (deliver_interrupt)): New function.
* cris/crisv32f.c (MY (deliver_interrupt)): New function.
* cris/devices.c: Include hw-device.h.
(device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
(device_io_write_buffer): Only perform 0x900000xx-functions if
cris_have_900000xxif is nonzero. Else if WITH_HW defined,
call hw_io_write_buffer. Add return 0 last in function.
* cris/sim-if.c (cris_have_900000xxif): Now global.
(sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
Force "-model" option, effectively.
* cris/sim-main.h (cris_interrupt_delivery_fn): New type.
(struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
(mem_put_hi): Hook in simulated trace port.
(mem_get_byte): Hook in simulated uart control port.
* opc2c: Be more picky about matching special comments.
* r8c.opc (shift_op): Limit shift counts to -16..16.
(BMcnd): Map conditional codes.
* reg.c (condition_true): Mask condition code to 4 bits.
* syscalls.c: Include local syscall.h.
* syscall.h: New, copied from libgloss.
sim_resume. Expect target signal numbers from sim_stop_reason.
* wrapper.c (gdb/signals.h): Include it.
(SIGTRAP): Don't define.
(SIGBUS): Likewise.
(sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*.
* sim-reason.c (sim_stop_reason): Use
sim_signal_to_target, not sim_signal_to_host.
* sim-signal.c (sim_signal_to_host): Fix typo.
(sim_signal_to_target): New function.
* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* interf.c: (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* sim_calls.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
* psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.
(open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
TARGET_O_WRONLY.
(cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
F_GETFL on fd 0, 1 and 2.
last_open_fd, last_open_flags.
* cris/traps.c: Don't include targ-vals.h.
(TARGET_O_ACCMODE): Define.
(cris_break_13_handler): Set new _sim_cpu members.
<case TARGET_SYS_fcntl>: Support special case of F_GETFL.
Rearrange code as switch. Emit "unimplemented" abort for
unimplemented fcntl calls.
* sim/arm/armos.c: Include limits.h
(unlink): Remove this macro. It is unused in this file and
conflicts with sim_callback->unlink.
(PATH_MAX): Define as 1024 if not already defined.
(ReadFileName): New function.
(SWIopen): Fix a potential buffer overflow.
(SWIremove): New function.
(SWIrename): Ditto.
(ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY,
SWI_Remove, and SWI_Rename, as well as the RDI calls
AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and
AngelSWI_Reason_Rename.
* cpu.c,cpu.h,decode.c,decode.h,model.c,sem.c: Regenerate.
Contribute the following changes:
2003-09-29 Dave Brolley <brolley@redhat.com>
* frv-sim.h: Use CGEN_ATTR_VALUE_ENUM_TYPE in place of
CGEN_ATTR_VALUE_TYPE.
* mloop.in: Ditto.
* pipeline.c: Ditto.
* traps.c: Ditto.
* armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when
available.
* armemu.c: Use them.
* armvirt.c (ARMul_MemoryInit): Use correct type for size.
* configure.ac: Check for stdint.h.
* config.in: Regenerate.
* configure: Regenerate.
* mips.igen (mips32r2, mips64r2): New ISA models. Add new model
tags to all instructions which are applicable to the new ISAs.
(do_ror, do_dror, ROR, RORV, DROR, DROR32, DRORV): Add, moved from
vr.igen.
* mips3264r2.igen: New file for MIPS 32/64 revision 2 specific
instructions.
* vr.igen (do_ror, do_dror, ROR, RORV, DROR, DROR32, DRORV): Move
to mips.igen.
* configure.ac (mipsisa32r2*-*-*, mipsisa64r2*-*-*): Add new targets.
* configure: Regenerate.
* common/callback.c (PIPE_BUF): Provide default refinition.
(os_lstat): Use stat if lstat is not available on the host.
(os_ftruncate): Return EINVAL if not available on the host.
(os_truncate): Ditto.
* common/configure.ac: Check for lstat, truncate and ftruncate.
* common/configure: Regenerate.
* common/config.in: Regenerate.
(ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is found.
* armdefs.h (struct ARMul_State): Add new field: is_v6.#
(ARM_v6_Prop): Define.
* arminit.c (ARMul_NewState): Initialise the v6 flag.
(ARMul_SelectProcessor): Determine if the v6 flag should be set.
* wrapper.c (sim_create_inferior): For unknown architectures, default to allowing the v6 instructions.
2005-02-28 Jim Blandy <jimb@redhat.com>
* aclocal.m4 (SIM_AC_OPTION_WARNINGS): Don't include
-Wuninitialized in the default list of build warnings if CFLAGS is
set, and doesn't include -O. (Using -Wuninitialized without
optimization produces a warning, which interferes with compilation
with -Werror.)
sim/ChangeLog:
2005-02-28 Jim Blandy <jimb@redhat.com>
* d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
Regenerated, after change to common/aclocal.m4.
* sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
strings.
(clear_accex): Ditto.
* sim/erc32/interf.c: Remove the redeclaration of fprintf.
* sim/erc32/sis.c: Ditto.
* sim/erc32/exec.c: Add missing semicolon.
* sim/erc32/func.c: Remove definitions of generic_print_address,
generic_symbol_at_address, buffer_read_memory and perror_memory, as
they are already defined in opcodes/dis-buf.c.
2005-02-09 Jim Blandy <jimb@redhat.com>
* cgen-sim.scm (load-files): Don't load fixup.scm. (See
corresponding change in the sim/common directory.)
sim/common/ChangeLog:
2005-02-09 Jim Blandy <jimb@redhat.com>
* Make-common.in (CGEN): Load guile.scm, and include a trailing
'-s' argument.
(CGEN_FLAGS_TO_PASS): Include single quotes around the reference
to $(CGEN), to ensure that the command substitution happens where
the variable is referenced in the submake, not when the submake's
arguments are expanded.
(cgen.sh): Be prepared for the 'cgen' argument to contain spaces.
(arch, cpu, decode, cpu-decode, defs, desc): Place the name of the
application Scheme script directly after ${cgen}; don't precede it
with a -s.
* callback.c [HAVE_LIMITS_H]: Include limits.h.
Include libiberty.h.
(os_close, os_read, os_write, os_fstat, os_ftruncate): Support fd
being either end of a pipe.
(os_pipe, os_pipe_empty, os_pipe_nonempty): New functions.
(os_shutdown): Clear pipe state.
(default_callback): Initialize new members.
(cb_store_target_endian): Renamed from store, new first parameter
host_callback *cb, drop last parameter big_p. Take endianness
from cb.
(cb_host_to_target_stat): Change to use cb_store_target_endian.
Remove variable big_p.
* nrun.c (main): Initialize default_callback.target_endian.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mn10300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: d10v/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: erc32/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: frv/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: h8300/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: m32r/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mcore/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: mips/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: v850/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Index: common/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* common.m4: New file, based on of aclocal.m4.
Index: arm/ChangeLog
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
Committed by Kei Sakamoto.
* traps-linux.c (m32r_trap): Add entries of the following dummy system
calls: __NR_mmap2, __NR_lchown32, __NR_getuid32, __NR_getgid32,
__NR_geteuid32, __NR_getegid32, __NR_getgroups32, __NR_fchown32,
__NR_setfsuid32, __NR_setfsgid32, __NR_getresuid32,
__NR_getresgid32 and __NR_chown32.
* syscall.h: Add new definitions of system call number.
* sim-options.c (STANDARD_OPTIONS): New member OPTION_SYSROOT.
(standard_options): Support --sysroot=<path>.
(standard_option_handler): Handle OPTION_SYSROOT.
* syscall.c (simulator_sysroot): Define, initialized empty.
(get_path): Prepend simulator_sysroot to absolute file path.
[HAVE_STRING_H]: Include string.h.
[!HAVE_STRING_H && HAVE_STRINGS_H]: Include strings.h.
* nrun.c [HAVE_UNISTD_H]: Include unistd.h.
(main): If simulator_sysroot is not empty, chdir there.
* sim-config.h (simulator_sysroot): Declare.
st_dev, st_ino, st_mode, st_nlink, st_uid, st_gid, st_rdev,
st_size, st_blksize, st_blocks, st_atime, st_mtime and st_ctime.
* aclocal.m4 (SIM_CHECK_MEMBER, SIM_CHECK_MEMBERS_1)
(SIM_CHECK_MEMBERS): New macros.
* callback.c (cb_host_to_target_stat): Use temporary macro ST_x
for struct stat member test and write. Add ST_x calls for each
struct stat member tested in configure.in. Wrap each ST_x call in
#ifdef of configure macro for that member.
* configure, config.in: Regenerate.
add sub-dependencies for other sim files that they include.
(sim_main_headers): Use sim-*_h rules.
(sim-load.o): Depend on sim-basics_h, not sim_main_headers.
Committed by Andrew Cagney.
* traps-linux.c: Don't include linux/module.h.
(m32r_trap): Remove dummy systemcall's entry of __NR_ustat and
__NR_get_kernel_syms.
Committed by Andrew Cagney.
* configure.in: Check for sys/mount.h, sys/vfs.h, sys/statfs.h.
Check for struct statfs.
* emul_netbsd.c: If not HAVE_STRUCT_STATFS, #undef HAVE_FSTATFS.
* configure, config.in: Regenerate.
* bandor.s: New file.
* bandornot.s: New file.
* bclr.s: New file.
* bld.s: New file.
* bldnot.s: New file.
* bset.s: New file.
* bst.s: New file.
* bxor.s: New file.
* clip.s: New file.
* div.s: New file.
* fail.s: New file, make sure fail works.
* fsca.s: New file.
* fsrra.s: New file.
* mov.s: New file.
* mulr.s: New file.
* pass.s: New file, make sure pass works.
* pushpop.s: New file.
* resbank.s: New file.
* testutils.inc (bf8k, bt8k, assertmem): New macros.
* interp.c (RAISE_EXCEPTION_IF_IN_DELAY_SLOT): New macro.
(in_delay_slot): New flag variable.
(Delay_Slot): Set in_delay_slot.
(sim_resume): Reset in_delay_slot after leaving code switch.
* gencode.c (op tab): Call RAISE_EXCEPTION_IF_IN_DELAY_SLOT for all
instructions not allowed in delay slots.
Commited by Corinna Vinschen <vinschen@redhat.com>
Introduce SH2a support.
* interp.c: Change type of jump table to short. Add various macros.
(sim_load): Save the bfd machine code.
(sim_create_inferior): Ditto.
(union saved_state_type): Add tbr, ibnr and ibcr registers.
Move bfd_mach to end of struct. Add regstack pointer.
(init_dsp): Don't swap contents of sh_dsp_table any more. Instead
use it directly in its own switch statement. Allocate space for 512
register banks.
(do_long_move_insn): New function.
(do_blog_insn): Ditto.
(trap): Use trap #13 and trap #14 to set ibnr and ibcr.
* gencode.c: Move movx/movy insns into separate switch statement.
(op tab): Add sh2a insns. Reject instructions that are disabled
on that chip.
(gensim_caselist): Generate default case here instead of in caller.
(gensim): Generate two separate switch statements. Call
gensim_caselist once for each (for movsxy_tab and for tab).
Add tokens for r15 and multiple regs.
(conflict_warn, warn_conflicts): Add for debugging.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install-man, installdirs): Add DESTDIR prefix.
Index: ppc/ChangeLog
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install, installdirs): Add DESTDIR.
2003-07-23 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Make sure that dst.reg refers to the
right register byte in mova/sz.l @(dd,RnL),ERn.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
mulxs, divs and divxs.
sim/testsuite/sim/h8300/ChangeLog:
2003-07-22 Michael Snyder <msnyder@redhat.com>
* mul.s: Don't try to use negative immediate (it's always
unsigned).
* div.s: Ditto.
* utils-fpu.inc (enable_fpu, ckm_fp_cc): New macros.
(clrset_fp_cc): Fix mask used for upper 7 condition codes.
* utils-mdmx.inc: Include utils-fpu.inc.
(enable_mdmx): Use enable_fpu.
* utils-fpu.inc: New file.
* utils-mdmx.inc: New file.
* mdmx-ob.s: New file.
* mdmx-ob-sb1.s: New file.
* basic.exp: Run new mdmx-ob and mdmx-ob-sb1 tests.
* sim/mips/basic.exp (run_hilo_test): New procedure.
(models): Only list models that are included in the configuration.
(submodels): New variable, set to submodels of the above.
(mips64vr-*-elf, mips64vrel-*-elf): New configuration stanza.
Run hilo-hazard-[123].s.
(MIPS_MACH_HAS_MULT_HILO_HAZARD, MIPS_MACH_HAS_DIV_HILO_HAZARD): New.
* mips.igen (check_mt_hilo, check_mult_hilo, check_div_hilo): Provide
separate implementations for mipsIV and mipsV. Use new macros to
determine whether the restrictions apply.
* frv.c (frvbf_iacc_cut): Rework, taking rounding into account.
testsuite/
* sim/frv/fr400/scutss.cgs: Fix tests to account for rounding.
Add some new ones.
* gencode.c (table): Change from char to short.
(dumptable): Change generated table from char to short.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
(init_dsp): Compute size of sh_dsp_table.
(sim_resume): Change jump_table from char to short.
Committed by Andrew Cagney.
* mloopx.in: Update copyright.
(xextract-pbb): Fixed trap for system calls operation in parallel.
* mloop2.in (xextract-pbb): Ditto.
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips*-*-*): Configure in testsuite.
* configure: Regenerate.
[ sim/testsuite/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* sim/mips: New directory. Tests for the MIPS simulator.
[ sim/testsuite/sim/mips/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* basic.exp: New file.
* testutils.inc: New file.
* sanity.s: New file.
* mips.igen (check_mf_cycles, check_mt_hilo, check_mf_hilo)
(check_mult_hilo): Improve comments.
(check_div_hilo): Likewise. Also, fork off a new version
to handle mips32/mips64 (since there are no hazards to check
in MIPS32/MIPS64).
* gencode.c (expand_opcode): Simplify and reorganize.
Eliminate "shift" parameter. Eliminate "4 bits at a time"
assumption. Flatten switch statement to a single level.
Add "eeee" token for even-numbered registers.
(bton): Delete.
(fsca): Use "eeee" token.
(ppi_moves): Rename to "expand_ppi_movxy". Do the ddt
[movx/movy] expansion here, as well as the ppi expansion.
(gensim_caselist): Accept 'eeee' along with 'nnnn'.
(O_RDONLY): Do not define.
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(targ-vals.h): Include it.
(translate_open_mode): Use TARGET_O_* instead of O_*.
(SWIopen): Likewise.
* Makefile.in (armos.o): Depend on targ-vals.h.
(SPR_REGNUM_MAX): Delete.
* frv.c (gdb/sim-frv.h): Include.
(frvbf_fetch_register, frvbf_store_register): Use register number
constants from gdb/sim-frv.h. Check availability of general
purpose and float registers.
* frv-sim.h (REGNUM_LR): Removed.
(REGNUM_SPR_MIN,REGNUM_SPR_MAX): New macros.
* frv.c (frvbf_fetch_register): Fetch SPR registers based on
REGNUM_SPR_MIN and REGNUM_SPR_MAX. Check whether SPRs are implemented.
Return 0 for an unimplemented register. Return the length of the data
for an implemented register.
(frvbf_store_register): Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
* sim/frv/testutils.inc (or_gr_immed): New macro.
* sim/frv/fp_exception-fr550.cgs: Write insns using
unaligned registers into the program in order to
cause the required exceptions.
* sim/frv/fp_exception.cgs: Ditto.
* sim/frv/regalign.cgs: Ditto.
* sim/frv/fr550: New subdirectory.
* sim/frv/fr400/*.cgs: Add fr550 as appropriate.
* sim/frv/fr500/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*-fr550.cgs: New test cases for fr550.
* profile.h (update_FR_ptime): New prototype.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): Ditto.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(post_wait_for_SPR): Ditto.
* profile.c (update_FR_ptime): Moved here from profile-fr500.c.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): New function.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(vliw_wait_for_fdiv_resource): Correct resource name.
(vliw_wait_for_fsqrt_resource): Ditto.
(post_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_commit): New function.
(frvbf_model_fr500_u_gr2fr): Pass out_FRk as output register to
adjust_float_register_busy.
(frvbf_model_fr500_u_gr_load): Record latency of SPR registers.
(frvbf_model_fr500_u_fr_load): Wait for and record latency of SPR
registers.
(frvbf_model_fr500_u_float_arith): Ditto.
(frvbf_model_fr500_u_float_dual_arith): Ditto.
(frvbf_model_fr500_u_float_div): Ditto.
(frvbf_model_fr500_u_float_sqrt): Ditto.
(frvbf_model_fr500_u_float_convert): Ditto.
(update_FR_ptime): Moved to profile.c
(update_FRdouble_ptime): Moved to profile.c
* profile-fr400.c (update_FR_ptime): Removed. Identical to functions
for other machines.
(update_FRdouble_ptime): Ditto.
* arch.h,cpu.h,sem.c,decode.[ch],model.c,sem.c: Regenerated.
