match stubs and protocol spec.
* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
when passing to function which expects that.
The following changes aren't quite enough to make things work with
LynxOS (apprently kernel problems).
* infrun.c (wait_for_inferior): When resuming new thread, pass pid
not -1 for remote case.
* thread.c (info_threads_command): Give error if !target_has_stack.
* infrun.c (start_remote): Call init_thread_list.
* thread.c (info_threads_command): Don't call kill for remote
debugging target.
* target.c (normal_pid_to_str): Print "thread" not "process" for
remote.
* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
response, and `thread' part of 'T' response.
* gdbserver/*: If program exits, send packet to GDB before
exiting. Handle termination with a signal the same as exiting
with an exitstatus.
* remote.c: Don't try to kill program after getting an 'X'
response.
* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* thread.c: Include "gdbcmd.h" and <ctype.h>.
* Makefile.in: Update dependency.
* thread.c (thread_command): Remove unused variable p.
* values.c (unpack_double): Use len instead of TYPE_LENGTH (type).
* valprint.c (print_floating): Correctly check sign bit now that
we are using unsigned arithmetic.
* symtab.c (find_pc_line_range): Remove unused variables exact_match,
ind, and l.
macro to set process groups.
* infptrace.c (child_resume): Temporarily use Lynx PIDGET to
specify resumption of all threads.
* infrun.c (wait_for_inferior): Fix handling of thread-specific
breakpoints for systems where DECR_PC_AFTER_BREAK > 0 (ie: backup
PC by the right amount when continuing the thread).
* thread.c (thread_apply_command): Add the `thread apply'
command to apply a given GDB command to a list of threads.
* Makefile.in (CLIBS): Reorder to make Lynx ld happy.
* (HFILES): New file thread.h.
* (OBS): New file thread.c.
* configure.in: Host config for Lynx/386.
* fork-child.c (fork_inferior): Call init_thread_list().
* infrun.c (resume): Add pid to invocation of target_resume().
* (wait_for_inferior): Pay attention to pid from target_wait().
Multi-threading code now uses this to determine what to do.
* inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro.
Use target_pid_to_str() macro throughout when printing pid.
* inferior.h (child_resume): Add pid to prototype.
* hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as
argument, instead of using inferior_pid.
* procfs.c (procfs_resume): Pass in pid as argument. Ignored for
now. Use target_pid_to_str() macro throughout for printing process id.
* remote-adapt.c (adapt_resume): Pass in pid as argument.
* remote-eb.c (eb_resume): Pass in pid as argument.
* remote-es.c (es1800_resume): Pass in pid as argument.
* remote-hms.c (hms_resume): Pass in pid as argument.
* remote-mips.c (mips_resume): Pass in pid as argument.
* remote-mm.c (mm_resume): Pass in pid as argument.
* remote-monitor.c (monitor_resume): Pass in pid as argument.
* remote-nindy.c (nindy_resume): Pass in pid as argument.
* remote-sa.sparc.c (remote_resume): Pass in pid as argument.
* remote-sim.c (rem_resume): Pass in pid as argument.
* remote-sp64sim.c (simif_resume): Pass in pid as argument.
* remote-st.c (st2000_resume): Pass in pid as argument.
* remote-udi.c (udi_resume): Pass in pid as argument.
* remote-vx.c (vx_resume): Pass in pid as argument.
* remote-z8k.c (rem_resume): Pass in pid as argument.
* remote.c (remote_resume): Pass in pid as argument.
* solib.c (solid_create_inferior_hook): Pass inferior_pid to
target_resume().
* target.c (normal_pid_to_str): New routine to print out process
ID normally.
* target.h (struct target_ops): Add pid to prototype at
to_resume(). (target_resume): Add pid argument.
* (target_pid_to_str): Default definition for normal type pids.
* thread.c, thread.c: New modules for multi thread/process control.
