gas/
* config/tc-riscv.c (explicit_csr): New static boolean.
Used to indicate CSR are explictly used.
(riscv_ip): Set explicit_csr to TRUE if any CSR is used.
(riscv_write_out_attrs): If we already have set elf priv
attributes, then generate them. Otherwise, don't generate
them when no CSR are used.
* testsuite/gas/riscv/attribute-01.d: Remove the priv attributes.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-11.s: New testcase.
* testsuite/gas/riscv/attribute-11.d: New testcase. The CSR is
used, so we should output the ELF priv attributes.
* testsuite/gas/riscv/attribute-12.d: New testcase. The CSR is
used, so output the priv attributes according to the -mpriv-spec.
* testsuite/gas/riscv/attribute-13.d: New testcase. The CSR isn't
used, so ignore the -mpriv-spec setting.
ld/
* testsuite/ld-riscv-elf/attr-merge-arch-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
* testsuite/ld-riscv-elf/call-relax.d: Add -mno-arch-attr.
Don't do anything special with non-loaded, non-alloced sections.
In particular, any relocs in such sections should not affect GOT
and PLT reference counting (ie. we don't allow them to create GOT
or PLT entries), there's no possibility or desire to optimize TLS
relocs, and there's not much point in propagating relocs to shared
libs that the dynamic linker won't relocate.
Since check_relocs is no longer called on non-loaded, non-alloced
sections, remove SEC_ALLOC check. Resolve relocation in debug section
against symbol defined in shared library to 0.
bfd/
PR ld/26080
* elf-m10300.c (mn10300_elf_relocate_section): Resolve relocation
in debug section against symbol defined in shared library to 0.
* elf32-i386.c (elf_i386_check_relocs): Remove SEC_ALLOC check.
* elf32-lm32.c (lm32_elf_check_relocs): Likewise.
* elf32-m32r.c (m32r_elf_check_relocs): Likewise.
* elf32-nds32.c (nds32_elf_check_relocs): Likewise.
* elf32-nios2.c (nios2_elf32_check_relocs): Likewise.
* elf32-or1k.c (or1k_elf_check_relocs): Likewise.
* elf32-ppc.c (ppc_elf_check_relocs): Likewise.
* elf32-sh.c (sh_elf_check_relocs): Likewise.
* elf32-xtensa.c (elf_xtensa_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_check_relocs): Likewise.
* elf64-ppc.c (ppc64_elf_check_relocs): Likewise.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise.
* elf32-vax.c (elf_vax_check_relocs): Set non_got_ref for non-GOT
reference.
(elf_vax_adjust_dynamic_symbol): Generate a copy reloc only if
there is non-GOT reference.
* elflink.c (_bfd_elf_link_check_relocs): Skip non-loaded,
non-alloced sections.
ld/
PR ld/26080
* testsuite/ld-elf/comm-data.exp: Remove copy_reloc.
* testsuite/ld-elf/comm-data2r.rd: Removed.
* testsuite/ld-elf/comm-data2r.sd: Likewise.
* testsuite/ld-elf/comm-data2r.xd: Likewise.
When binutils is compiled with -fsanitize=undefined, many tests with
linker, instead of $CC, fail with undefined symbol references to sanitize
library. Define NOSANTIZE_CFLAGS to -fno-sanitize=all if target compiler
supports it and compile such tests with $NOSANTIZE_CFLAGS.
* testsuite/config/default.exp (NOSANTIZE_CFLAGS): New.
* testsuite/ld-elf/linux-x86.exp: Add $NOSANTIZE_CFLAGS to
tests with run_ld_link_exec_tests.
* testsuite/ld-elf/shared.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Add $NOSANTIZE_CFLAGS to
tests with ld_link.
* testsuite/ld-gc/gc.exp: Add $NOSANTIZE_CFLAGS to cflags.
* testsuite/ld-plugin/lto.exp: Add $NOSANTIZE_CFLAGS to tests
with run_ld_link_tests.a
* testsuite/ld-plugin/plugin.exp: Append $NOSANTIZE_CFLAGS to
CFLAGS.
* testsuite/ld-selective/selective.exp: Add $NOSANTIZE_CFLAGS
to cflags and cxxflags.
* testsuite/ld-srec/srec.exp: Append $NOSANTIZE_CFLAGS to CC
and CXX.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Updated for
-fsanitize=undefined.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Add $NOSANTIZE_CFLAGS to
tests with run_cc_link_tests and run_ld_link_tests.
--export-dynamic-symbol-list is like a dynamic list, but without
the symbolic property for unspecified symbols.
When creating an executable, --export-dynamic-symbol-list is treated
like --dynamic-list.
When creating a shared library, it is treated like --dynamic-list if
-Bsymbolic or --dynamic-list are used, otherwise, it is ignored, so
that references to matched symbols will not be bound to the definitions
within the shared library.
PR ld/25910
* NEWS: Mention --export-dynamic-symbol[-list].
* ld.texi: Document --export-dynamic-symbol[-list].
* ldgram.y: Pass current_dynamic_list_p to
lang_append_dynamic_list.
* ldlang.c (current_dynamic_list_p): New.
(ang_append_dynamic_list): Updated to take a pointer to
struct bfd_elf_dynamic_list * argument instead of using
link_info.dynamic_list.
(lang_append_dynamic_list_cpp_typeinfo): Pass
&link_info.dynamic_list to ang_append_dynamic_list.
(lang_append_dynamic_list_cpp_new): Likewise.
* ldlang.h (current_dynamic_list_p): New.
(lang_append_dynamic_list): Add a pointer to
struct bfd_elf_dynamic_list * argument.
* ldlex.h (option_values): Add OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
* lexsup.c (ld_options): Add entries for
OPTION_EXPORT_DYNAMIC_SYMBOL and
OPTION_EXPORT_DYNAMIC_SYMBOL_LIST.
(parse_args): Handle --export-dynamic-symbol and
--export-dynamic-symbol-list.
* testsuite/ld-dynamic/export-dynamic-symbol-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-1.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-2.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol-list-glob.d: New.
* testsuite/ld-dynamic/export-dynamic-symbol.exp: New.
* testsuite/ld-dynamic/export-dynamic-symbol.s: New.
* testsuite/ld-dynamic/foo-bar.list: New.
* testsuite/ld-dynamic/foo.list: New.
* testsuite/ld-dynamic/foo.s: New.
* testsuite/ld-dynamic/fstar.list: New.
* testsuite/ld-elf/dlempty.list: New.
* testsuite/ld-elf/shared.exp: Add tests for
--export-dynamic-symbol and --export-dynamic-symbol-list.
Add a configure option, --enable-textrel-check=[no|yes|warning|error],
to decide what ELF linker should do by default with DT_TEXTREL in an
executable or shared library.
PR ld/20824
* NEWS: Mention --enable-textrel-check=[no|yes|warning|error].
* configure.ac: Add --enable-textrel-check=[no|yes|warning|error].
(DEFAULT_LD_TEXTREL_CHECK): New AC_DEFINE_UNQUOTED.
(DEFAULT_LD_TEXTREL_CHECK_WARNING): Likewise.
* ldmain.c (main): Initialize link_info.textrel_check to
DEFAULT_LD_TEXTREL_CHECK.
* lexsup.c (ld_options): Check DEFAULT_LD_TEXTREL_CHECK_WARNING.
* config.in: Regenerated.
* configure: Likewise.
* lexsup.c (parse_args): Generate an error if a name is not
provided to the -Map option.
(ld_options): Mention that the -Map option supports a directory
name as an argument.
* NEWS: Remove mention of support for an empty string as an
argument to -Map.
* ld.texi: Likewise.
Noticed by my autotester covering cris-axis-linux-gnu:
...
Running <x>/src/ld/testsuite/ld-elf/elf.exp ...
XPASS: ld-elf/pr19539
...
This was apparently as intended, so I'm just adjusting the xfail.
PR ld/22909
* testsuite/ld-elf/pr19539.d: Don't xfail for cris*-*-*.
* lexsup.c (parse_args): If the map filename is defined but empty
create a name based upon the output file name. If the name is
defined but refers to a directory create a file inside the
directory based on the output file name.
* ld.texi: Document the new feature.
* testsuite/ld-script/map-address.exp: Add test of new feature.
* NEWS: Mention the new feature.
--dynamic-list* should work both before and after -Bsymbolic and
-Bsymbolic-functions.
PR ld/26018
* lexsup.c (parse_args): Simplify.
* testsuite/ld-elf/dl4e.out: New.
* testsuite/ld-elf/shared.exp: Updated for PR ld/26018 tests.
1. Remove the -mriscv-isa-version and --with-riscv-isa-version options.
We can still use -march to choose the version for each extensions, so there is
no need to add these.
2. Change the arguments of options from [1p9|1p9p1|...] to [1.9|1.9.1|...].
Unlike the architecture string has specified by spec, ther is no need to do
the same thing for options.
3. Spilt the patches to reduce the burdens of review.
[PATCH 3/7] RISC-V: Support new GAS options and configure options to set ISA versions
to
[PATCH v2 3/9] RISC-V: Support GAS option -misa-spec to set ISA versions
[PATCH v2 4/9] RISC-V: Support configure options to set ISA versions by default.
[PATCH 4/7] RISC-V: Support version checking for CSR according to privilege version.
to
[PATCH v2 5/9] RISC-V: Support version checking for CSR according to privilege spec version.
[PATCH v2 6/9] RISC-V: Support configure option to choose the privilege spec version.
4. Use enum class rather than string to compare the choosen ISA spec in opcodes/riscv-opc.c.
The behavior is same as comparing the choosen privilege spec.
include * opcode/riscv.h: Include "bfd.h" to support bfd_boolean.
(enum riscv_isa_spec_class): New enum class. All supported ISA spec
belong to one of the class
(struct riscv_ext_version): New structure holds version information
for the specific ISA.
* opcode/riscv-opc.h (DECLARE_CSR): There are two version information,
define_version and abort_version. The define_version means which
privilege spec is started to define the CSR, and the abort_version
means which privilege spec is started to abort the CSR. If the CSR is
valid for the newest spec, then the abort_version should be
PRIV_SPEC_CLASS_DRAFT.
(DECLARE_CSR_ALIAS): Same as DECLARE_CSR, but only for the obselete CSR.
* opcode/riscv.h (enum riscv_priv_spec_class): New enum class. Define
the current supported privilege spec versions.
(struct riscv_csr_extra): Add new fields to store more information
about the CSR. We use these information to find the suitable CSR
address when user choosing a specific privilege spec.
binutils * dwarf.c: Updated since DECLARE_CSR is changed.
opcodes * riscv-opc.c (riscv_ext_version_table): The table used to store
all information about the supported spec and the corresponding ISA
versions. Currently, only Zicsr is supported to verify the
correctness of Z sub extension settings. Others will be supported
in the future patches.
(struct isa_spec_t, isa_specs): List for all supported ISA spec
classes and the corresponding strings.
(riscv_get_isa_spec_class): New function. Get the corresponding ISA
spec class by giving a ISA spec string.
* riscv-opc.c (struct priv_spec_t): New structure.
(struct priv_spec_t priv_specs): List for all supported privilege spec
classes and the corresponding strings.
(riscv_get_priv_spec_class): New function. Get the corresponding
privilege spec class by giving a spec string.
(riscv_get_priv_spec_name): New function. Get the corresponding
privilege spec string by giving a CSR version class.
* riscv-dis.c: Updated since DECLARE_CSR is changed.
* riscv-dis.c: Add new disassembler option -Mpriv-spec to dump the CSR
according to the chosen version. Build a hash table riscv_csr_hash to
store the valid CSR for the chosen pirv verison. Dump the direct
CSR address rather than it's name if it is invalid.
(parse_riscv_dis_option_without_args): New function. Parse the options
without arguments.
(parse_riscv_dis_option): Call parse_riscv_dis_option_without_args to
parse the options without arguments first, and then handle the options
with arguments. Add the new option -Mpriv-spec, which has argument.
* riscv-dis.c (print_riscv_disassembler_options): Add description
about the new OBJDUMP option.
ld * testsuite/ld-riscv-elf/attr-merge-arch-01.d: Updated
priv attributes according to the -mpriv-spec option.
* testsuite/ld-riscv-elf/attr-merge-arch-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-arch-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-a.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-b.s: Likewise.
* testsuite/ld-riscv-elf/attr-merge-priv-spec.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-stack-align.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-01.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-02.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-03.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-04.d: Likewise.
* testsuite/ld-riscv-elf/attr-merge-strict-align-05.d: Likewise.
bfd * elfxx-riscv.h (riscv_parse_subset_t): Add new callback function
get_default_version. It is used to find the default version for
the specific extension.
* elfxx-riscv.c (riscv_parsing_subset_version): Remove the parameters
default_major_version and default_minor_version. Add new bfd_boolean
parameter *use_default_version. Set it to TRUE if we need to call
the callback rps->get_default_version to find the default version.
(riscv_parse_std_ext): Call rps->get_default_version if we fail to find
the default version in riscv_parsing_subset_version, and then call
riscv_add_subset to add the subset into subset list.
(riscv_parse_prefixed_ext): Likewise.
(riscv_std_z_ext_strtab): Support Zicsr extensions.
* elfnn-riscv.c (riscv_merge_std_ext): Use strcasecmp to compare the
strings rather than characters.
riscv_merge_arch_attr_info): The callback function get_default_version
is only needed for assembler, so set it to NULL int the linker.
* elfxx-riscv.c (riscv_estimate_digit): Remove the static.
* elfxx-riscv.h: Updated.
gas * testsuite/gas/riscv/priv-reg-fail-read-only-01.s: Updated.
* config/tc-riscv.c (default_arch_with_ext, default_isa_spec):
Static variables which are used to set the ISA extensions. You can
use -march (or ELF build attributes) and -misa-spec to set them,
respectively.
(ext_version_hash): The hash table used to handle the extensions
with versions.
(init_ext_version_hash): Initialize the ext_version_hash according
to riscv_ext_version_table.
(riscv_get_default_ext_version): The callback function of
riscv_parse_subset_t. According to the choosed ISA spec,
get the default version for the specific extension.
(riscv_set_arch): Set the callback function.
(enum options, struct option md_longopts): Add new option -misa-spec.
(md_parse_option): Do not call riscv_set_arch for -march. We will
call it later in riscv_after_parse_args. Call riscv_get_isa_spec_class
to set default_isa_spec class.
(riscv_after_parse_args): Call init_ext_version_hash to initialize the
ext_version_hash, and then call riscv_set_arch to set the architecture
with versions according to default_arch_with_ext.
* testsuite/gas/riscv/attribute-02.d: Set 0p0 as default version for
x extensions.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: New testcase. For i-ext, we
already set it's version to 2p1 by march, so no need to use the default
2p2 version. For m-ext, we do not set the version by -march and ELF arch
attribute, so set the default 2p0 to it. For zicsr, it is not defined in
ISA spec 2p2, so set 0p0 to it.
* testsuite/gas/riscv/attribute-10.d: New testcase. The version of
zicsr is 2p0 according to ISA spec 20191213.
* config/tc-riscv.c (DEFAULT_RISCV_ARCH_WITH_EXT)
(DEFAULT_RISCV_ISA_SPEC): Default configure option settings.
You can set them by configure options --with-arch and
--with-isa-spec, respectively.
(riscv_set_default_isa_spec): New function used to set the
default ISA spec.
(md_parse_option): Call riscv_set_default_isa_spec rather than
call riscv_get_isa_spec_class directly.
(riscv_after_parse_args): If the -isa-spec is not set, then we
set the default ISA spec according to DEFAULT_RISCV_ISA_SPEC by
calling riscv_set_default_isa_spec.
* testsuite/gas/riscv/attribute-01.d: Add -misa-spec=2.2, since
the --with-isa-spec may be set to different ISA spec.
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* configure.ac: Add configure options, --with-arch and
--with-isa-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (default_priv_spec): Static variable which is
used to check if the CSR is valid for the chosen privilege spec. You
can use -mpriv-spec to set it.
(enum reg_class): We now get the CSR address from csr_extra_hash rather
than reg_names_hash. Therefore, move RCLASS_CSR behind RCLASS_MAX.
(riscv_init_csr_hashes): Only need to initialize one hash table
csr_extra_hash.
(riscv_csr_class_check): Change the return type to void. Don't check
the ISA dependency if -mcsr-check isn't set.
(riscv_csr_version_check): New function. Check and find the CSR address
from csr_extra_hash, according to default_priv_spec. Report warning
for the invalid CSR if -mcsr-check is set.
(reg_csr_lookup_internal): Updated.
(reg_lookup_internal): Likewise.
(md_begin): Updated since DECLARE_CSR and DECLARE_CSR_ALIAS are changed.
(enum options, struct option md_longopts): Add new GAS option -mpriv-spec.
(md_parse_option): Call riscv_set_default_priv_version to set
default_priv_spec.
(riscv_after_parse_args): If -mpriv-spec isn't set, then set the default
privilege spec to the newest one.
(enum riscv_csr_class, struct riscv_csr_extra): Move them to
include/opcode/riscv.h.
* testsuite/gas/riscv/priv-reg-fail-fext.d: This test case just want
to check the ISA dependency for CSR, so fix the spec version by adding
-mpriv-spec=1.11.
* testsuite/gas/riscv/priv-reg-fail-fext.l: Likewise. There are some
version warnings for the test case.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-01.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-read-only-02.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.d: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-rv32-only.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.d: New test case.
Check whether the CSR is valid when privilege version 1.9 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: New test case.
Check whether the CSR is valid when privilege version 1.9.1 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p9p1.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.d: New test case.
Check whether the CSR is valid when privilege version 1.10 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p10.l: Likewise.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.d: New test case.
Check whether the CSR is valid when privilege version 1.11 is choosed.
* gas/testsuite/gas/riscv/priv-reg-fail-version-1p11.l: Likewise.
* config/tc-riscv.c (DEFAULT_RISCV_ISA_SPEC): Default configure option
setting. You can set it by configure option --with-priv-spec.
(riscv_set_default_priv_spec): New function used to set the default
privilege spec.
(md_parse_option): Call riscv_set_default_priv_spec rather than
call riscv_get_priv_spec_class directly.
(riscv_after_parse_args): If -mpriv-spec isn't set, then we set the
default privilege spec according to DEFAULT_RISCV_PRIV_SPEC by
calling riscv_set_default_priv_spec.
* testsuite/gas/riscv/csr-dw-regnums.d: Add -mpriv-spec=1.11, since
the --with-priv-spec may be set to different privilege spec.
* testsuite/gas/riscv/priv-reg.d: Likewise.
* configure.ac: Add configure option --with-priv-spec.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-riscv.c (explicit_attr): Rename explicit_arch_attr to
explicit_attr. Set it to TRUE if any ELF attribute is found.
(riscv_set_default_priv_spec): Try to set the default_priv_spec if
the priv attributes are set.
(md_assemble): Set the default_priv_spec according to the priv
attributes when we start to assemble instruction.
(riscv_write_out_attrs): Rename riscv_write_out_arch_attr to
riscv_write_out_attrs. Update the arch and priv attributes. If we
don't set the corresponding ELF attributes, then try to output the
default ones.
(riscv_set_public_attributes): If any ELF attribute or -march-attr
options is set (explicit_attr is TRUE), then call riscv_write_out_attrs
to update the arch and priv attributes.
(s_riscv_attribute): Make sure all arch and priv attributes are set
before any instruction.
* testsuite/gas/riscv/attribute-01.d: Update the priv attributes if any
ELF attribute or -march-attr is set. If the priv attributes are not
set, then try to update them by the default setting (-mpriv-spec or
--with-priv-spec).
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-09.d: Likewise.
* testsuite/gas/riscv/attribute-10.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise. Also, the priv spec
set by priv attributes must be supported.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p9.d: Likewise. Updated
priv attributes according to the -mpriv-spec option.
* testsuite/gas/riscv/priv-reg-fail-version-1p9p1.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p10.d: Likewise.
* testsuite/gas/riscv/priv-reg-fail-version-1p11.d: Likewise.
* testsuite/gas/riscv/priv-reg.d: Removed.
* testsuite/gas/riscv/priv-reg-version-1p9.d: New test case. Dump the
CSR according to the priv spec 1.9.
* testsuite/gas/riscv/priv-reg-version-1p9p1.d: New test case. Dump the
CSR according to the priv spec 1.9.1.
* testsuite/gas/riscv/priv-reg-version-1p10.d: New test case. Dump the
CSR according to the priv spec 1.10.
* testsuite/gas/riscv/priv-reg-version-1p11.d: New test case. Dump the
CSR according to the priv spec 1.11.
* config/tc-riscv.c (md_show_usage): Add descriptions about
the new GAS options.
* doc/c-riscv.texi: Likewise.
ldmain.c:add_archive_element copies file name pointers from the bfd to
a lang_input_statement_type.
input->filename = abfd->filename;
input->local_sym_name = abfd->filename;
This results in stale pointers when twiddling the bfd filename in
places like the pe ld after_open. So don't free the bfd filename,
and make copies using bfd_alloc memory that won't result in small
memory leaks that annoy memory checkers.
PR 25993
bfd/
* archive.c (_bfd_get_elt_at_filepos): Don't strdup filename,
use bfd_set_filename.
* elfcode.h (_bfd_elf_bfd_from_remote_memory): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* opncls.c (bfd_fopen, bfd_openstreamr, bfd_openr_iovec, bfd_openw),
(bfd_create): Likewise.
(_bfd_delete_bfd): Don't free filename.
(bfd_set_filename): Copy filename param to bfd_alloc'd memory,
return pointer to the copy or NULL on alloc fail.
* vms-lib.c (_bfd_vms_lib_get_module): Free newname and test
result of bfd_set_filename.
* bfd-in2.h: Regenerate.
gdb/
* solib-darwin.c (darwin_bfd_open): Don't strdup pathname for
bfd_set_filename.
* solib-aix.c (solib_aix_bfd_open): Use std::string for name
passed to bfd_set_filename.
* symfile-mem.c (add_vsyscall_page): Likewise for string
passed to symbol_file_add_from_memory.
(symbol_file_add_from_memory): Make name param a const char* and
don't strdup.
ld/
* emultempl/pe.em (gld_${EMULATION_NAME}_after_open): Don't copy
other_bfd_filename for bfd_set_filename, and test result of
bfd_set_filename call. Don't create a new is->filename, simply
copy from bfd filename. Free new_name after bfd_set_filename.
* emultempl/pep.em (gld_${EMULATION_NAME}_after_open): Likewise.
The linker silently writes out a conditional branch to 0 if the
target symbol in R_AARCH64_CONDBR19 or R_AARCH64_TSTBR14 relocations is
undefined. Emit a PLT instead so that behaviour is the same for these
relocations as the llvm linker.
The special behaviour for undefined weak symbols, where conditional
branches to such symbols result in a branch unto themselves, has been
retained. This is because the weak-undefined.s test explicitly checks
for that, leading me to conclude that it's expected behaviour.
bfd * elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Club
BFD_RELOC_AARCH64_BRANCH19 and BFD_RELOC_AARCH64_TSTBR14
cases with BFD_RELOC_AARCH64_JUMP26.
(elfNN_aarch64_check_relocs): Likewise.
ld * testsuite/ld-aarch64/aarch64-elf.exp: New test
emit-relocs-560.
* testsuite/ld-aarch64/emit-relocs-560.d: New file.
* testsuite/ld-aarch64/emit-relocs-560.s: New file.
Now that ISA3.1 is out we can finish with the powerxx silliness.
bfd/
* elf64-ppc.c: Rename powerxx to power10 throughout.
gas/
* config/tc-ppc.c (md_assemble): Update for PPC_OPCODE_POWER10
renaming.
* testsuite/gas/ppc/prefix-align.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/gas/ppc/prefix-pcrel.d: Likewise.
* testsuite/gas/ppc/prefix-reloc.d: Likewise.
gold/
* powerpc.cc: Rename powerxx to power10 throughout.
include/
* elf/ppc64.h: Update comment.
* opcode/ppc.h (PPC_OPCODE_POWER10): Rename from PPC_OPCODE_POWERXX.
ld/
* testsuite/ld-powerpc/callstub-1.d: Use -mpower10/-Mpower10 in
place of -mfuture/-Mfuture.
* testsuite/ld-powerpc/notoc2.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Likewise.
* testsuite/ld-powerpc/tlsgd.d: Likewise.
* testsuite/ld-powerpc/tlsie.d: Likewise.
* testsuite/ld-powerpc/tlsld.d: Likewise.
opcodes/
* ppc-dis.c (ppc_opts): Add "power10" entry.
(print_insn_powerpc): Update for PPC_OPCODE_POWER10 renaming.
* ppc-opc.c (POWER10): Rename from POWERXX. Update all uses.
PR ld/25665
* bfd/elfnn-aarch64.c (group_sections): Copy implementation
from elf32-arm.c.
* testsuite/ld-aarch64/aarch64-elf.exp: Add new test.
* testsuite/ld-aarch64/farcall-group.s: New large group test.
* testsuite/ld-aarch64/farcall-group.d: Likewise.
This allows backend merge_private_bfd_data to examine shared library
e_flags and/or .gnu.attributes. ARM and PowerPC have done so when
using ld.gold for a long time.
(The tic6x change below is dead code due to the earlier FIXME,
but this is probably one of the changes needed there.)
PR 25882
bfd/
* elf32-tic6x.c (elf32_tic6x_merge_attributes): Don't transfer
Tag_ABI_PIC or Tag_ABI_PID from dynamic objects to the output.
ld/
* ldlang.c (lang_check): Call bfd_merge_private_bfd_data for
shared libraries.
Fields marked with XTENSA_NDIFF relocations are not negated, they only
have sign bits removed. Don't negate their values when relaxation is
performed. Don't add sign bits when the value is zero. Report overflow
when the result has negative sign but all significant bits are zero.
2020-04-29 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (relax_section): Don't negate diff_value for
XTENSA_NDIFF relocations. Don't add sign bits whe diff_value
equals 0. Report overflow when the result has negative sign but
all significant bits are zero.
ld/
* testsuite/ld-xtensa/relax-diff1.d: New test definition.
* testsuite/ld-xtensa/relax-diff1.s: New test source.
* testsuite/ld-xtensa/relax-ndiff.d: New test definition.
* testsuite/ld-xtensa/relax-ndiff.s: New test source.
* testsuite/ld-xtensa/xtensa.exp: (relax-diff1)
(relax-ndiff): New tests.
PR 25829
* testsuite/ld-scripts/default-script.exp: Add --image-base=0 to
LDFLAGS for targets *-*-mingw64 x86_64-*-cygwin.
* testsuite/ld-scripts/default-script1.d: No longer have to skip
test for those targets.
* testsuite/ld-scripts/default-script2.d: Likewise.
* testsuite/ld-scripts/default-script3.d: Likewise.
* testsuite/ld-scripts/default-script4.d: Likewise.
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a
couple of years ago. The BIG OBJ format is a slightly different COFF format
which extends the size of the number of section field in the header from a
uint16_t to a uint32_t and so greatly increases the number of sections allowed.
However the 32-bit version of bfd never got support for this. The GHC Haskell
compiler generates a great deal of symbols due to it's use of
-ffunction-sections and -fdata-sections.
This meant that we could not build the 32-bit version of the GHC Compiler for
many releases now as binutils didn't have this support.
This patch adds the support to the 32-bit port of binutils as well and also does
come cleanup in the code.
bfd/ChangeLog:
* coff-i386.c (COFF_WITH_PE_BIGOBJ): New.
* coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New.
* config.bfd (targ_selvecs): Rename x86_64_pe_be_vec
to x86_64_pe_big_vec as it not a big-endian format.
(vec i386_pe_big_vec): New.
* configure.ac: Likewise.
* targets.c: Likewise.
* configure: Regenerate.
* pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG,
COFF_WITH_PE_BIGOBJ): New.
* pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG):
New.
(x86_64_pe_be_vec): Moved.
gas/ChangeLog:
* NEWS: Add news entry for big-obj.
* config/tc-i386.c (i386_target_format): Support new format.
* doc/c-i386.texi: Add i386 support.
* testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific.
* testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well.
ld/ChangeLog:
* pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
Introduce new relaxations XTENSA_PDIFF{8,16,32} for positive differences
(subtracted symbol precedes diminished symbol) and XTENSA_NDIFF{8,16,32}
for negative differences (subtracted symbol follows diminished symbol).
Don't generate XTENSA_DIFF relocations in the assembler, generate
XTENSA_PDIFF or XTENSA_NDIFF based on relative symbol position.
Handle XTENSA_DIFF in BFD for compatibility with old object files.
Handle XTENSA_PDIFF and XTENSA_NDIFF in BFD, treating difference value
as unsigned.
2020-04-22 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* bfd-in2.h: Regenerated.
* elf32-xtensa.c (elf_howto_table): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
(elf_xtensa_reloc_type_lookup, elf_xtensa_do_reloc)
(relax_section): Add cases for R_XTENSA_PDIFF{8,16,32} and
R_XTENSA_NDIFF{8,16,32}.
* libbfd.h (bfd_reloc_code_real_names): Add names for
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
* reloc.c: Add documentation for BFD_RELOC_XTENSA_PDIFF{8,16,32}
and BFD_RELOC_XTENSA_NDIFF{8,16,32}.
binutils/
* readelf.c (is_none_reloc): Recognize
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32}.
gas/
* config/tc-xtensa.c (md_apply_fix): Replace
BFD_RELOC_XTENSA_DIFF{8,16,32} generation with
BFD_RELOC_XTENSA_PDIFF{8,16,32} and
BFD_RELOC_XTENSA_NDIFF{8,16,32} generation.
* testsuite/gas/xtensa/loc.d: Replace BFD_RELOC_XTENSA_DIFF16
with BFD_RELOC_XTENSA_PDIFF16 in the expected output.
include/
* elf/xtensa.h (elf_xtensa_reloc_type): New entries for
R_XTENSA_PDIFF{8,16,32} and R_XTENSA_NDIFF{8,16,32}.
ld/
* testsuite/ld-xtensa/relax-loc.d: New test definition.
* testsuite/ld-xtensa/relax-loc.s: New test source.
* testsuite/ld-xtensa/xtensa.exp (relax-loc): New test.
ELF size_dynamic_sections is called by the ELF backend linker after all
the linker input files have been seen but before the section sizes have
been set. After the sections sizes have been set, target-specific,
global optimizations may make some dynamic sections zero-sized if they
are no longer needed.
Add ELF strip_zero_sized_dynamic_sections so that ELF backend linker can
strip zero-sized dynamic sections after the sections sizes have been set.
bfd/
PR ld/25849
* elf-bfd.h (elf_backend_data): Add
elf_backend_strip_zero_sized_dynamic_sections.
(_bfd_elf_strip_zero_sized_dynamic_sections): New prototype.
* elf64-alpha.c (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
* elflink.c (_bfd_elf_strip_zero_sized_dynamic_sections): New
function.
* elfxx-target.h (elf_backend_strip_zero_sized_dynamic_sections):
New macro.
(elfNN_bed): Add elf_backend_strip_zero_sized_dynamic_sections.
ld/
PR ld/25849
* ldelfgen.c (ldelf_map_segments): Call
elf_backend_strip_zero_sized_dynamic_sections.
* testsuite/ld-alpha/tlsbinr.rd: Updated.
Stripping .rela.branch_lt is easy enough but messes with the
testsuite due to stub symbols (that use section id) changing. Tests
that run on more than one target variant can be tricky to fix, this
renaming happened to work.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Strip relbrlt too.
ld/
* testsuite/ld-powerpc/tlsopt5.s: Rename foo to aaaaa.
* testsuite/ld-powerpc/tlsopt5.d: Adjust to suit.
* testsuite/ld-powerpc/tlsopt6.d: Likewise.
