Commit Graph

136 Commits

Author SHA1 Message Date
Nick Clifton
13761a1136 * archures.c: Add some more MSP430 machine numbers.
* config.bfd (msp430): Define targ_selvecs.
	* configure.in: Add bfd_elf32_msp430_ti_vec.
	* cpu-msp430.c: Add some more MSP430 machine numbers.
	* elf32-msp430.c Add support for MSP430X relocations.
	Add support for TI compiler generated relocations.
	Add support for sym_diff relocations.
	Add support for relaxing out of range short branches into long
	branches.
	Add support for MSP430 attribute section.
	* reloc.c: Add MSP430X relocations.
	* targets.c: Add bfd_elf32_msp430_ti_vec.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.

	* readelf.c: Add support for MSP430X architecture.

	* readelf.exp: Expect -wi test to fail for the MSP430.

	* config/tc-msp430.c: Add support for the MSP430X architecture.
	Add code to insert a NOP instruction after any instruction that
	might change the interrupt state.
	Add support for the LARGE memory model.
	Add code to initialise the .MSP430.attributes section.
	* config/tc-msp430.h: Add support for the MSP430X architecture.
	* doc/c-msp430.texi: Document the new -mL and -mN command line
	options.
	* NEWS: Mention support for the MSP430X architecture.

	* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
	Expect the FORWARD test to pass for the MSP430.
	Skip the REDEF tests for the MSP430.
	Expect the 930509A test to fail for the MSP430.
	* gas/all/sleb128-4.d: Skip for the MSP430.
	* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
	Skip the EHOPT0 test for the MSP430.
	Skip the REDEF and EQU-RELOC tests for the MSP430.
	* gas/elf/section2.e-msp430: New file.
	* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
	addresses.
	* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
	* gas/msp430/msp430x.s: New test.
	* gas/msp430/msp430x.d: Expected disassembly.
	* gas/msp430/msp430.exp: Run new test.
	* gas/msp430/opcode.d: Update expected disassembly.

	* msp430.h: Add MSP430X relocs.
	Add some more MSP430 machine numbers.
	Add values used by .MSP430.attributes section.

	* msp430.h: Add patterns for MSP430X instructions.

	* Makefile.am: Add emsp430X.c
	* Makefine.in: Regenerate.
	* configure.tgt (msp430): Add msp430X emulation.
	* ldmain.c (multiple_definition): Only disable relaxation if it
	was enabled by the user.
	* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
	* emulparams/msp430all.sh: Add support for MSP430X.
	* emultempl/generic.em: (before_parse): Enable relaxation for the
	MSP430.
	* scripttempl/msp430.sc: Reorganize sections.  Add .rodata
	section.
	* scripttempl/msp430_3.sc: Likewise.
	* NEWS: Mention support for MSP430X.

	* ld-elf/flags1.d: Expect this test to pass on the MSP430.
	* ld-elf/init-fini-arrays.d: Expect this test to fail on the
	MSP430.
	* ld-elf/merge.d: Expect this test to pass on the MSP430.
	* ld-elf/sec64k.exp: Skip these tests for the MSP430.
	* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
	* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
	* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
	fail on the MSP430.

	* msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 21:06:15 +00:00
Nick Clifton
b40bf0a255 * elflink.c (_bfd_elf_gc_mark_extra_sections): Remove mark from
fragmented .debug_line sections associated with unmarked code
	sections.

	* dwarf.c (read_debug_line_header): New function.  Reads in a
	header in a .debug_line section.
	(display_debug_lines_raw): Use new function.  Handle fragmentary
	.debug_line sections.
	(display_debug_lines_decoded): Likewise.
	* readelf.c (process_section_headers): Handle fragmenatry
	.debug_line sections.
	(display_debug_section): Likewise.

	* as.c (Options): Add -gdwarf-sections.
	(parse_args): Likewise.
	* as.h (flag_dwarf_sections): Declare.
	* dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
	(process_entries): When -gdwarf-sections is enabled generate
	fragmentary .debug_line sections.
	(out_debug_line): Set the section for the .debug_line section end
	symbol.
	* doc/as.texinfo: Document -gdwarf-sections.
	* NEWS: Mention -gdwarf-sections.

	* gas/elf/dwarf2-3.d: Fix expected readelf output.

	* scripttempl/DWARF.sc: Add support for .debug_line.* and
	.debug_line_end.
2013-04-29 13:38:59 +00:00
Sandra Loosemore
36591ba149 2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	bfd/
	* Makefile.am (ALL_MACHINES): Add cpu-nios2.lo.
	(ALL_MACHINES_CFILES): Add cpu-nios2.c.
	(BFD_BACKENDS): Add elf32-nios2.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-nios2.c.
	* Makefile.in: Regenerated.
	* configure.in: Add entries for bfd_elf32_bignios2_vec and
	bfd_elf32_littlenios2_vec.
	* configure: Regenerated.
	* config.bfd: Add cases for nios2.
	* archures.c (enum bfd_architecture): Add bfd_arch_nios2.
	(bfd_mach_nios2): Define.
	(bfd_nios2_arch): Declare.
	(bfd_archures_list): Add bfd_nios2_arch.
	* targets.c (bfd_elf32_bignios2_vec): Declare.
	(bfd_elf32_littlenios2_vec): Declare.
	(_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and
	bfd_elf32_littlenios2_vec.
	* elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA.
	* reloc.c (enum bfd_reloc_code_real): Add Nios II relocations.
	* bfd-in2.h: Regenerated.
	* libbfd.h: Regenerated.
	* cpu-nios2.c: New file.
	* elf32-nios2.c: New file.

	opcodes/
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and
	nios2-opc.c.
	* Makefile.in: Regenerated.
	* configure.in: Add case for bfd_nios2_arch.
	* configure: Regenerated.
	* disassemble.c (ARCH_nios2): Define.
	(disassembler): Add case for bfd_arch_nios2.
	* nios2-dis.c: New file.
	* nios2-opc.c: New file.

	include/
	* dis-asm.h (print_insn_big_nios2): Declare.
	(print_insn_little_nios2): Declare.

	include/elf
	* nios2.h: New file.

	include/opcode/
	* nios2.h: New file.

	gas/
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
	(TARGET_CPU_HFILES): Add config/tc-nios2.h.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-linux*.
	* config/obj-elf.c: Conditionally include elf/nios2.h.
	* config/tc-nios2.c: New file.
	* config/tc-nios2.h: New file.
	* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set NIOSII.
	* doc/as.texinfo (Overview): Add Nios II options.
	(Machine Dependencies): Include c-nios2.texi.
	* doc/c-nios2.texi: New file.
	* NEWS: Note Altera Nios II support.

	gas/testsuite/
	* gas/nios2/add.d: New.
	* gas/nios2/add.s: New.
	* gas/nios2/align_fill.d: New.
	* gas/nios2/align_fill.s: New.
	* gas/nios2/align_text.d: New.
	* gas/nios2/align_text.s: New.
	* gas/nios2/and.d: New.
	* gas/nios2/and.s: New.
	* gas/nios2/branch.d: New.
	* gas/nios2/branch.s: New.
	* gas/nios2/break.d: New.
	* gas/nios2/break.s: New.
	* gas/nios2/bret.d: New.
	* gas/nios2/bret.s: New.
	* gas/nios2/cache.d: New.
	* gas/nios2/cache.s: New.
	* gas/nios2/call26.d: New.
	* gas/nios2/call26.s: New.
	* gas/nios2/call.d: New.
	* gas/nios2/call.s: New.
	* gas/nios2/cmp.d: New.
	* gas/nios2/cmp.s: New.
	* gas/nios2/comments.d: New.
	* gas/nios2/comments.s: New.
	* gas/nios2/complex.d: New.
	* gas/nios2/complex.s: New.
	* gas/nios2/ctl.d: New.
	* gas/nios2/ctl.s: New.
	* gas/nios2/custom.d: New.
	* gas/nios2/custom.s: New.
	* gas/nios2/etbt.d: New.
	* gas/nios2/etbt.s: New.
	* gas/nios2/flushda.d: New.
	* gas/nios2/flushda.s: New.
	* gas/nios2/illegal.l: New.
	* gas/nios2/illegal.s: New.
	* gas/nios2/jmp.d: New.
	* gas/nios2/jmp.s: New.
	* gas/nios2/ldb.d: New.
	* gas/nios2/ldb.s: New.
	* gas/nios2/ldh.d: New.
	* gas/nios2/ldh.s: New.
	* gas/nios2/ldw.d: New.
	* gas/nios2/ldw.s: New.
	* gas/nios2/lineseparator.d: New.
	* gas/nios2/lineseparator.s: New.
	* gas/nios2/mov.d: New.
	* gas/nios2/movia.d: New.
	* gas/nios2/movia.s: New.
	* gas/nios2/movi.d: New.
	* gas/nios2/movi.s: New.
	* gas/nios2/mov.s: New.
	* gas/nios2/mul.d: New.
	* gas/nios2/mul.s: New.
	* gas/nios2/nios2.exp: New.
	* gas/nios2/nor.d: New.
	* gas/nios2/nor.s: New.
	* gas/nios2/or.d: New.
	* gas/nios2/or.s: New.
	* gas/nios2/ret.d: New.
	* gas/nios2/ret.s: New.
	* gas/nios2/rol.d: New.
	* gas/nios2/rol.s: New.
	* gas/nios2/rotate.d: New.
	* gas/nios2/rotate.s: New.
	* gas/nios2/stb.d: New.
	* gas/nios2/stb.s: New.
	* gas/nios2/sth.d: New.
	* gas/nios2/sth.s: New.
	* gas/nios2/stw.d: New.
	* gas/nios2/stw.s: New.
	* gas/nios2/sub.d: New.
	* gas/nios2/sub.s: New.
	* gas/nios2/sync.d: New.
	* gas/nios2/sync.s: New.
	* gas/nios2/trap.d: New.
	* gas/nios2/trap.s: New.
	* gas/nios2/tret.d: New.
	* gas/nios2/tret.s: New.
	* gas/nios2/warn_noat.l: New.
	* gas/nios2/warn_noat.s: New.
	* gas/nios2/warn_nobreak.l: New.
	* gas/nios2/warn_nobreak.s: New.
	* gas/nios2/xor.d: New.
	* gas/nios2/xor.s: New.

	ld/
	* Makefile.am (enios2elf.c): New rule.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-*-*.
	* emulparams/nios2elf.sh: New file.
	* NEWS: Note Altera Nios II support.

	ld/testsuite/
	* ld-nios2/emit-relocs-1a.s: New.
	* ld-nios2/emit-relocs-1b.s: New.
	* ld-nios2/emit-relocs-1.d: New.
	* ld-nios2/emit-relocs-1.ld: New.
	* ld-nios2/gprel.d: New.
	* ld-nios2/gprel.s: New.
	* ld-nios2/hilo16.d: New.
	* ld-nios2/hilo16.s: New.
	* ld-nios2/hilo16_symbol.s: New.
	* ld-nios2/imm5.d: New.
	* ld-nios2/imm5.s: New.
	* ld-nios2/imm5_symbol.s: New.
	* ld-nios2/nios2.exp: New.
	* ld-nios2/pcrel16.d: New.
	* ld-nios2/pcrel16_label.s: New.
	* ld-nios2/pcrel16.s: New.
	* ld-nios2/relax_callr.d: New.
	* ld-nios2/relax_callr.ld: New.
	* ld-nios2/relax_callr.s: New.
	* ld-nios2/relax_cjmp.d: New.
	* ld-nios2/relax_cjmp.s: New.
	* ld-nios2/relax_jmp.ld: New.
	* ld-nios2/relax_section.d: New.
	* ld-nios2/relax_section.s: New.
	* ld-nios2/relax_ujmp.d: New.
	* ld-nios2/relax_ujmp.s: New.
	* ld-nios2/reloc.d: New.
	* ld-nios2/reloc.s: New.
	* ld-nios2/reloc_symbol.s: New.
	* ld-nios2/s16.d: New.
	* ld-nios2/s16.s: New.
	* ld-nios2/s16_symbol.s: New.
	* ld-nios2/u16.d: New.
	* ld-nios2/u16.s: New.
	* ld-nios2/u16_symbol.s: New.
	* ld-elf/indirect.exp: Skip on targets that don't support
	-shared -fPIC.
	* ld-elfcomm/elfcomm.exp: Build with -G0 for nios2.
	* ld-plugin/lto.exp: Skip shared library tests on targets that
	don't support them.  Skip execution tests on non-native targets.

	binutils/
	* readelf.c: Include elf/nios2.h.
	(dump_relocations): Add case for EM_ALTERA_NIOS2.
	(get_nios2_dynamic_type): New.
	(get_dynamic_type): Add case for EM_ALTERA_NIOS2.
	(is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case.
	(is_16bit_abs_reloc): Likewise.
	(is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases.
	* NEWS: Note Altera Nios II support.
	* MAINTAINERS: Add Nios II maintainers.
2013-02-06 23:22:26 +00:00
Nick Clifton
a3c629886c * common.h: Fix case of "Meta".
* metag.h: New file.

	* dis-asm.h (print_insn_metag): New declaration.

	* metag.h: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* configure.in: Add Meta.
	* disassemble.c: Add Meta support.
	* metag-dis.c: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* archures.c (bfd_mach_metag): New.
	* bfd-in2.h: Regenerate.
	* config.bfd: Add Meta.
	* configure: Regenerate.
	* configure.in: Add Meta.
	* cpu-metag.c: New file.
	* elf-bfd.h: Add Meta.
	* elf32-metag.c: New file.
	* elf32-metag.h: New file.
	* libbfd.h: Regenerate.
	* reloc.c: Add Meta relocations.
	* targets.c: Add Meta.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* config/tc-metag.c: New file.
	* config/tc-metag.h: New file.
	* configure.tgt: Add Meta.
	* doc/Makefile.am: Add Meta.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Add Meta.
	* doc/as.texiinfo: Document Meta options.
	* doc/c-metag.texi: New file.

	* gas/metag/labelarithmetic.d: New file.
	* gas/metag/labelarithmetic.s: New file.
	* gas/metag/metacore12.d: New file.
	* gas/metag/metacore12.s: New file.
	* gas/metag/metacore21-invalid.l: New file.
	* gas/metag/metacore21-invalid.s: New file.
	* gas/metag/metacore21.d: New file.
	* gas/metag/metacore21.s: New file.
	* gas/metag/metacore21ext.d: New file.
	* gas/metag/metacore21ext.s: New file.
	* gas/metag/metadsp21-invalid.l: New file.
	* gas/metag/metadsp21-invalid.s: New file.
	* gas/metag/metadsp21.d: New file.
	* gas/metag/metadsp21.s: New file.
	* gas/metag/metadsp21ext.d: New file.
	* gas/metag/metadsp21ext.s: New file.
	* gas/metag/metafpu21.d: New file.
	* gas/metag/metafpu21.s: New file.
	* gas/metag/metafpu21ext.d: New file.
	* gas/metag/metafpu21ext.s: New file.
	* gas/metag/metag.exp: New file.
	* gas/metag/tls.d: New file.
	* gas/metag/tls.s: New file.

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* configure.tgt: Add Meta.
	* emulparams/elf32metag.sh: New file.
	* emultempl/metagelf.em: New file.

	* ld-elf/merge.d: Mark Meta as xfail.
	* ld-gc/start.d: Skip this test on Meta.
	* ld-gc/personality.d: Skip this test on Meta.
	* ld-metag/external.s: New file.
	* ld-metag/metag.exp: New file.
	* ld-metag/pcrel.d: New file.
	* ld-metag/pcrel.s: New file.
	* ld-metag/shared.d: New file.
	* ld-metag/shared.r: New file.
	* ld-metag/shared.s: New file.
	* ld-metag/stub.d: New file.
	* ld-metag/stub.s: New file.
	* ld-metag/stub_pic_app.d: New file.
	* ld-metag/stub_pic_app.r: New file.
	* ld-metag/stub_pic_app.s: New file.
	* ld-metag/stub_pic_shared.d: New file.
	* ld-metag/stub_pic_shared.s: New file.
	* ld-metag/stub_shared.d: New file.
	* ld-metag/stub_shared.r: New file.
	* ld-metag/stub_shared.s: New file.

	* binutils/readelf.c: (guess_is_rela): Add EM_METAG.
	(dump_relocations): Add EM_METAG.
	(get_machine_name): Correct case for Meta.
	(is_32bit_abs_reloc): Add support for Meta ADDR32 reloc.
	(is_none_reloc): Add support for Meta NONE reloc.
2013-01-10 09:49:22 +00:00
Nick Clifton
5bf135a788 Add copyright notices 2012-12-17 16:56:12 +00:00
Nick Clifton
da2bb5602c Move aarch64 announcement into 2.23 section. 2012-08-22 07:35:36 +00:00
Nick Clifton
a06ea96464 Add support for 64-bit ARM architecture: AArch64 2012-08-13 14:52:54 +00:00
Tristan Gingold
af18cb5940 binutils/
2012-07-27  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.23.

gas/
2012-07-27  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.23.

ld/
2012-07-27  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.23.
2012-07-27 08:13:03 +00:00
Roland McGrath
fe13e45b9a gas/
* NEWS: Mention 'rep ret' too.

gas/testsuite/
	* gas/i386/rep-ret.d: New file.
	* gas/i386/rep-ret.s: New file.
	* gas/i386/i386.exp: Add the new test.

opcodes/
	* i386-opc.tbl: Add RepPrefixOk to ret.
	* i386-tbl.h: Regenerate.
2012-06-22 21:54:06 +00:00
Roland McGrath
29c048b696 gas/
* config/tc-i386.c (parse_insn): Don't complain about REP prefix
	when the template has opcode_modifier.repprefixok set.
	* NEWS: Mention the change.

gas/testsuite/
	* gas/i386/rep-bsf.d: New file.
	* gas/i386/rep-bsf.s: New file.
	* gas/i386/i386.exp: Add the new test.

opcodes/
	* i386-opc.h (RepPrefixOk): New enum constant.
	(i386_opcode_modifier): New bitfield 'repprefixok'.
	* i386-gen.c (opcode_modifiers): Add RepPrefixOk.
	* i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all
	instructions that have IsString.
	* i386-tbl.h: Regenerate.
2012-06-22 16:42:08 +00:00
Nick Clifton
6927f98292 * config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
	Tweak target flags to match other tools. (i.e. -m m68hc11).
	* doc/as.texinfo: Mention new options.
	* doc/c-m68hc11.texi: Document new options.
	* NEWS: Mention new support.

	* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
	* config.bfd: Likewise.
	* cpu-m9s12x.c: New.
	* cpu-m9s12xg.c: New.
	* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
	Add option to offset S12 addresses into XGATE memory space.
	Fix carry bug in IMM16 (IMM8 low/high) relocate.
	* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
	(ALL_MACHINES_CFILES): Likewise.
	* reloc.c: Add S12X relocs.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenerate.

	* gas/m68hc11/insns9s12x.s: New
	* gas/m68hc11/insns9s12x.d: New
	* gas/m68hc11/hexprefix.s: New
	* gas/m68hc11/hexprefix.d: New
	* gas/m68hc11/9s12x-exg-sex-tfr.s: New
	* gas/m68hc11/9s12x-exg-sex-tfr.d: New
	* gas/m68hc11/insns9s12xg.s: New
	* gas/m68hc11/insns9s12xg.d: New
	* gas/m68hc11/9s12x-mov.s: New
	* gas/m68hc11/9s12x-mov.d: New
	* gas/m68hc11/m68hc11.exp: Updated
	* gas/m68hc11/*.d: Brought in line with changed objdump output.
	* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
	* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
	* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
	* gas/elf/dwarf2-2.d: Likewise.

	* ld-m68hc11/xgate-link.s: New.
	* ld-m68hc11/xgate-link.d: New.
	* ld-m68hc11/xgate-offset.s: New.
	* ld-m68hc11/xgate-offset.d: New.
	* ld-m68hc11/xgate1.s: New.
	* ld-m68hc11/xgate1.d: New.
	* ld-m68hc11/xgate2.s: New.
	* ld-m68hc11/m68hc11.exp: Updated.
	* ld-m68hc11/*.d: Brought in line with changed objdump output.
	* ld-gc/gc.exp: Update CFLAGS for m68hc11.
	* ld-plugin/plugin.exp: Likewise.
	* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.

	* configure.in: Add S12X and XGATE co-processor support to m68hc11
	target.
	* disassemble.c: Likewise.
	* configure: Regenerate.
	* m68hc11-dis.c: Make objdump output more consistent, use hex
	instead of decimal and use 0x prefix for hex.
	* m68hc11-opc.c: Add S12X and XGATE opcodes.
	* dis-asm.h (print_insn_m9s12x): Prototype.
	(print_insn_m9s12xg): Prototype.

	* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
	R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
	(E_M68HC11_XGATE_RAMOFFSET): Define.

	* m68hc11.h: Add XGate definitions.
	(struct m68hc11_opcode): Add xg_mask field.
2012-05-15 12:55:51 +00:00
James Lemke
b9c361e0ad Add support for PowerPC VLE.
2012-05-14  Catherine Moore  <clm@codesourcery.com>

	* NEWS:  Mention PowerPC VLE port.

2012-05-14  James Lemke <jwlemke@codesourcery.com>
	    Catherine Moore  <clm@codesourcery.com>

	bfd/
	* bfd.c (bfd_lookup_section_flags): Add section parm.
	* ecoff.c (bfd_debug_section): Remove flag_info initializer.
	* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
	(bfd_elf_lookup_section_flags): Add section parm.
	* elf32-ppc.c (is_ppc_vle): New function.
	(ppc_elf_modify_segment_map): New function.
	(elf_backend_modify_segment_map): Define.
	(has_vle_insns): New define.
	* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
	* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
	Move in logic to omit / include a section.
	* libbfd-in.h (bfd_link_info): Add section parm.
	(bfd_generic_lookup_section_flags): Likewise.
	* reloc.c (bfd_generic_lookup_section_flags): Likewise.
	* section.c (bfd_section): Move out section_flag_info.
	(BFD_FAKE_SECTION): Remove flag_info initializer.
	* targets.c (_bfd_lookup_section_flags): Add section parm.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	bfd/
	* archures.c (bfd_mach_ppc_vle): New.
	* bfd-in2.h: Regenerated.
	* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
	* elf32-ppc.c (split16_format_type): New enumeration.
	(ppc_elf_vle_split16): New function.
	(HOWTO): Add entries for R_PPC_VLE relocations.
	(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
	(ppc_elf_section_flags): New function.
	(ppc_elf_lookup_section_flags): New function.
	(ppc_elf_section_processing): New function.
	(ppc_elf_check_relocs): Handle PPC_VLE relocations.
	(ppc_elf_relocation_section): Likewise.
	(elf_backend_lookup_section_flags_hook): Define.
	(elf_backend_section_flags): Define.
	(elf_backend_section_processing): Define.
	* elf32-ppc.h (ppc_elf_section_processing): Declare.
	* libbfd.h: Regenerated.
	* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
	BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
	BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
	BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
	BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
	BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
	BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
	BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
	BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	gas/
	* config/tc-ppc.c (insn_validate): New func of existing code to call..
	(ppc_setup_opcodes): ..from 2 places here.
	Revise for second (VLE) opcode table.
	Add #ifdef'd code to print opcode tables.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	gas/
	* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
	for the VLE conditional branches.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	gas/
	* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
	(PPC_VLE_SPLIT16D): New macro.
	(PPC_VLE_LO16A): New macro.
	(PPC_VLE_LO16D): New macro.
	(PPC_VLE_HI16A): New macro.
	(PPC_VLE_HI16D): New macro.
	(PPC_VLE_HA16A): New macro.
	(PPC_VLE_HA16D): New macro.
	(PPC_APUINFO_VLE): New definition.
	(md_chars_to_number): New function.
	(md_parse_option): Check for combinations of little
	endian and -mvle.
	(md_show_usage): Document -mvle.
	(ppc_arch): Recognize VLE.
	(ppc_mach): Recognize bfd_mach_ppc_vle.
	(ppc_setup_opcodes): Print the opcode table if
	* config/tc-ppc.h (ppc_frag_check): Declare.
	* doc/c-ppc.texi: Document -mvle.
	* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	gas/
	* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
	(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
	* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
	* dwarf2dbg.c (scale_addr_delta): Handle values of 1
	for DWARF2_LINE_MIN_INSN_LENGTH.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	gas/testsuite/
	* gas/ppc/ppc.exp: Run new tests.
	* gas/ppc/vle-reloc.d: New test.
	* gas/ppc/vle-reloc.s: New test.
	* gas/ppc/vle-simple-1.d: New test.
	* gas/ppc/vle-simple-1.s: New test.
	* gas/ppc/vle-simple-2.d: New test.
	* gas/ppc/vle-simple-2.s: New test.
	* gas/ppc/vle-simple-3.d: New test.
	* gas/ppc/vle-simple-3.s: New test.
	* gas/ppc/vle-simple-4.d: New test.
	* gas/ppc/vle-simple-4.s: New test.
	* gas/ppc/vle-simple-5.d: New test.
	* gas/ppc/vle-simple-5.s: New test.
	* gas/ppc/vle-simple-6.d: New test.
	* gas/ppc/vle-simple-6.s: New test.
	* gas/ppc/vle.d: New test.
	* gas/ppc/vle.s: New test.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>
	include/elf/
	* ppc.h (SEC_PPC_VLE): Remove.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
	    James Lemke  <jwlemke@codesourcery.com>

	include/elf/
	* ppc.h (R_PPC_VLE_REL8): New reloction.
	(R_PPC_VLE_REL15): Likewise.
	(R_PPC_VLE_REL24): Likewise.
	(R_PPC_VLE_LO16A): Likewise.
	(R_PPC_VLE_LO16D): Likewise.
	(R_PPC_VLE_HI16A): Likewise.
	(R_PPC_VLE_HI16D): Likewise.
	(R_PPC_VLE_HA16A): Likewise.
	(R_PPC_VLE_HA16D): Likewise.
	(R_PPC_VLE_SDA21): Likewise.
	(R_PPC_VLE_SDA21_LO): Likewise.
	(R_PPC_VLE_SDAREL_LO16A): Likewise.
	(R_PPC_VLE_SDAREL_LO16D): Likewise.
	(R_PPC_VLE_SDAREL_HI16A): Likewise.
	(R_PPC_VLE_SDAREL_HI16D): Likewise.
	(R_PPC_VLE_SDAREL_HA16A): Likewise.
	(R_PPC_VLE_SDAREL_HA16D): Likewise.
	(SEC_PPC_VLE): Remove.
	(PF_PPC_VLE): New program header flag.
	(SHF_PPC_VLE): New section header flag.
	(vle_opcodes, vle_num_opcodes): New.
	(VLE_OP): New macro.
	(VLE_OP_TO_SEG): New macro.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>

	include/opcode/
	* ppc.h (PPC_OPCODE_VLE): New definition.
	(PPC_OP_SA): New macro.
	(PPC_OP_SE_VLE): New macro.
	(PPC_OP): Use a variable shift amount.
	(powerpc_operand): Update comments.
	(PPC_OPSHIFT_INV): New macro.
	(PPC_OPERAND_CR): Replace with...
	(PPC_OPERAND_CR_BIT): ...this and
	(PPC_OPERAND_CR_REG): ...this.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	ld/
	* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
	Pass it to callback.
	(walk_wild_section_general): Pass section_flag_list to callback.
	(lang_add_section): Add sflag_list parm.
	Move out logic to keep / omit a section & call bfd_lookup_section_flags.
	(output_section_callback_fast): Add sflag_list parm.
	Add new parm to lang_add_section calls.
	(output_section_callback): Likewise.
	(check_section_callback): Add sflag_list parm.
	(lang_place_orphans): Add new parm to lang_add_section calls.
	(gc_section_callback): Add sflag_list parm.
	(find_relro_section_callback): Likewise.
	* ldlang.h (callback_t): Add flag_info parm.
	(lang_add_section): Add sflag_list parm.
	* emultempl/armelf.em (elf32_arm_add_stub_section):
	Add lang_add_section parm.
	* emultempl/beos.em (gld*_place_orphan): Likewise.
	* emultempl/elf32.em (gld*_place_orphan): Likewise.
	* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
	* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
	* emultempl/mipself.em (mips_add_stub_section): Likewise.
	* emultempl/mmo.em (mmo_place_orphan): Likewise.
	* emultempl/pe.em (gld_*_place_orphan): Likewise.
	* emultempl/pep.em (gld_*_place_orphan): Likewise.
	* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
	* emultempl/spuelf.em (spu_place_special_section): Likewise.
	* emultempl/vms.em (vms_place_orphan): Likewise.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	ld/testsuite/
	* ld-powerpc/powerpc.exp: Create ppceabitests.
	* ld-powerpc/vle-multiseg.s: New.
	* ld-powerpc/vle-multiseg-1.d: New.
	* ld-powerpc/vle-multiseg-1.ld: New.
	* ld-powerpc/vle-multiseg-2.d: New.
	* ld-powerpc/vle-multiseg-2.ld: New.
	* ld-powerpc/vle-multiseg-3.d: New.
	* ld-powerpc/vle-multiseg-3.ld: New.
	* ld-powerpc/vle-multiseg-4.d: New.
	* ld-powerpc/vle-multiseg-4.ld: New.
	* ld-powerpc/vle-multiseg-5.d: New.
	* ld-powerpc/vle-multiseg-5.ld: New.
	* ld-powerpc/vle-multiseg-6.d: New.
	* ld-powerpc/vle-multiseg-6.ld: New.
	* ld-powerpc/vle-multiseg-6a.s: New.
	* ld-powerpc/vle-multiseg-6b.s: New.
	* ld-powerpc/vle-multiseg-6c.s: New.
	* ld-powerpc/vle-multiseg-6d.s: New.
	* ld-powerpc/powerpc.exp: Run new tests.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	ld/
	* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

	ld/testsuite/
	* ld-powerpc/apuinfo.rd: Update for VLE.
	* ld-powerpc/vle-reloc-1.d: New.
	* ld-powerpc/vle-reloc-1.s: New.
	* ld-powerpc/vle-reloc-2.d: New.
	* ld-powerpc/vle-reloc-2.s: New.
	* ld-powerpc/vle-reloc-3.d: New.
	* ld-powerpc/vle-reloc-3.s: New.
	* ld-powerpc/vle-reloc-def-1.s: New.
	* ld-powerpc/vle-reloc-def-2.s: New.
	* ld-powerpc/vle-reloc-def-3.s: New.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

	opcodes/
	* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
	(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
	(vle_opcd_indices): New array.
	(lookup_vle): New function.
	(disassemble_init_powerpc): Revise for second (VLE) opcode table.
	(print_insn_powerpc): Likewise.
	* ppc-opc.c: Likewise.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
	    Rhonda Wittels  <rhonda@codesourcery.com>
	    Nathan Froyd <froydnj@codesourcery.com>

	opcodes/
	* ppc-opc.c (insert_arx, extract_arx): New functions.
	(insert_ary, extract_ary): New functions.
	(insert_li20, extract_li20): New functions.
	(insert_rx, extract_rx): New functions.
	(insert_ry, extract_ry): New functions.
	(insert_sci8, extract_sci8): New functions.
	(insert_sci8n, extract_sci8n): New functions.
	(insert_sd4h, extract_sd4h): New functions.
	(insert_sd4w, extract_sd4w): New functions.
	(insert_vlesi, extract_vlesi): New functions.
	(insert_vlensi, extract_vlensi): New functions.
	(insert_vleui, extract_vleui): New functions.
	(insert_vleil, extract_vleil): New functions.
 	(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
 	(BI16, BI32, BO32, B8): New.
	(B15, B24, CRD32, CRS): New.
 	(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
	(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
	(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
	(SH6_MASK): Use PPC_OPSHIFT_INV.
	(SI8, UI5, OIMM5, UI7, BO16): New.
	(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
	(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
	(ALLOW8_SPRG): New.
	(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
	(OPVUP, OPVUP_MASK OPVUP): New
	(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
	(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
	(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
	(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
 	(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
	(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
	(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
	(SE_IM5, SE_IM5_MASK): New.
	(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
	(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
	(BO32DNZ, BO32DZ): New.
	(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
	(PPCVLE): New.
	(powerpc_opcodes): Add new VLE instructions.  Update existing
	instruction to include PPCVLE if supported.
	* ppc-dis.c (ppc_opts): Add vle entry.
	(get_powerpc_dialect): New function.
	(powerpc_init_dialect): VLE support.
	(print_insn_big_powerpc): Call get_powerpc_dialect.
	(print_insn_little_powerpc): Likewise.
	(operand_value_powerpc): Handle negative shift counts.
	(print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-14 19:45:30 +00:00
Nick Clifton
f6c1a2d592 Add support for Motorola XGATE embedded CPU 2012-05-03 13:12:08 +00:00
Roland McGrath
fa94de6b5c gas/
2012-03-12  Roland McGrath  <mcgrathr@google.com>

	* config/tc-arm.c (arm_frag_max_var): New function.
	* config/tc-arm.h: Declare it.
	(md_frag_max_var): New macro.

	* config/tc-i386.c (i386_frag_max_var): New function.
	* config/tc-i386.h: Declare it.
	(md_frag_max_var): New macro.

	* doc/as.texinfo (Bundle directives): New node.
	(Pseudo Ops): Add it to the menu.
	* NEWS: Mention new feature.
	* read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro.
	[HANDLE_BUNDLE] (bundle_align_p2): New variable.
	[HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables.
	[HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle):
	New functions.
	(assemble_one): New function if [HANDLE_BUNDLE], #define directly
	to md_assembly if not.
	(read_a_source_file): Call assemble_one in place of md_assemble.
	(read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated
	.bundle_lock at end of processing.
	[HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock):
	New functions.
	[HANDLE_BUNDLE] (potable): Add their entries.
	* read.h: Declare new functions.

gas/testsuite/
2012-03-12  Roland McGrath  <mcgrathr@google.com>

	* gas/i386/bundle-bad.s: New file.
	* gas/i386/bundle-bad.d: New file.
	* gas/i386/bundle-bad.l: New file.
	* gas/i386/i386.exp: Run it.

	* gas/arm/bundle.s: New file.
	* gas/arm/bundle.d: New file.
	* gas/arm/bundle-lock.s: New file.
	* gas/arm/bundle-lock.d: New file.

	* gas/i386/bundle.s: New file.
	* gas/i386/bundle.d: New file.
	* gas/i386/x86-64-bundle.s: New file.
	* gas/i386/x86-64-bundle.d: New file.
	* gas/i386/bundle-lock.s: New file.
	* gas/i386/bundle-lock.d: New file.
	* gas/i386/i386.exp: Run them.
2012-03-13 16:59:57 +00:00
DJ Delorie
99c513f6ac [.]
* configure.ac (rl78-*-*) New case.
	* configure: Regenerate.

[bfd]
	* Makefile.am (ALL_MACHINES): Add cpu-rl78.lo.
	(ALL_MACHINES_CFILES): Add cpu-rl78.c.
	(BFD32_BACKENDS): Add elf32-rl78.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-rl78.c.
	(Makefile.in): Regenerate.
	* archures.c (bfd_architecture): Define bfd_arch_rl78.
	(bfd_archures_list): Add bfd_rl78_arch.
	* config.bfd: Add rl78-*-elf.
	* configure.in: Add bfd_elf32_rl78_vec.
	* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations.
	* targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* cpu-rl78.c: New file.
	* elf32-rl78.c: New file.

[binutils]
	* readelf.c: Include elf/rl78.h
	(guess_is_rela): Handle EM_RL78.
	(dump_relocations): Likewise.
	(get_machine_name): Likewise.
	(is_32bit_abs_reloc): Likewise.
	* NEWS: Mention addition of RL78 support.
	* MAINTAINERS: Add myself as RL78 port maintainer.

[gas]
	* Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c.
	(TARGET_CPU_HFILES): Add rc-rl78.h.
	(EXTRA_DIST): Add rl78-parse.c and rl78-parse.y.
	(rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules.
	* Makefile.in: Regenerate.
	* configure.in: Add rl78 case.
	* configure: Regenerate.
	* configure.tgt: Add rl78 case.
	* config/rl78-defs.h: New file.
	* config/rl78-parse.y: New file.
	* config/tc-rl78.c: New file.
	* config/tc-rl78.h: New file.
	* NEWS: Add Renesas RL78.

	* doc/Makefile.am (c-rl78.texi): New.
	* doc/Makefile.in: Likewise.
	* doc/all.texi: Enable it.
	* doc/as.texi: Add it.

[include]
	* dis-asm.h (print_insn_rl78): Declare.

[include/elf]
	* common.h (EM_RL78, EM_78K0R): New.
	* rl78.h: New.

[include/opcode]
	* rl78.h: New file.

[ld]
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c.
	(+eelf32rl78.c): New rule.
	* Makefile.in: Regenerate.
	* configure.tgt: Add rl78-*-* case.
	* emulparams/elf32rl78.sh: New file.
	* NEWS: Mention addition of Renesas RL78 support.

[opcodes]
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and
	rl78-dis.c.
	(MAINTAINERCLEANFILES): Add rl78-decode.c.
	(rl78-decode.c): New rule, built from rl78-decode.opc and opc2c.
	* Makefile.in: Regenerate.
	* configure.in: Add bfd_rl78_arch case.
	* configure: Regenerate.
	* disassemble.c: Define ARCH_rl78.
	(disassembler): Add ARCH_rl78 case.
	* rl78-decode.c: New file.
	* rl78-decode.opc: New file.
	* rl78-dis.c: New file.
2011-11-02 03:09:11 +00:00
Walter Lee
69f56ae1d3 Mention Tilera support in binutils/NEWS, and fix the TILEPro
capitalization in gas/NEWs and ld/NEWS.
2011-10-28 14:37:30 +00:00
Nick Clifton
cfb8c0921c bfd:
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo .
	(ALL_MACHINES_CFILES): Add cpu-epiphany.c .
	(BFD32_BACKENDS): Add elf32-epiphany.lo .
	(BFD32_BACKENDS_CFILES): Add elf32-epiphany.c .
	* Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate.
	* archures.c (bfd_arch_epiphany): Add.
	(bfd_mach_epiphany16, bfd_mach_epiphany32): Define.
	(bfd_epiphany_arch): Declare.
	(bfd_archures_list): Add &bfd_epiphany_arch.
	* config.bfd (epiphany-*-elf): New target case.
	* configure.in (bfd_elf32_epiphany_vec): New target vector case.
	* reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation.
	(BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise.
	(BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise.
	(BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise.
	* targets.c (bfd_elf32_epiphany_vec): Declare.
	(_bfd_target_vector): Add bfd_elf32_epiphany_vec.
	* po/SRC-POTFILES.in, po/bfd.pot: Regenerate.
	* cpu-epiphany.c, elf32-epiphany.c: New files.
binutils:
	* readelf.c (include "elf/epiphany.h")
	(guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY.
	(get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise.
	(is_16bit_abs_reloc, is_none_reloc): Likewise.
	* po/binutils.pot: Regenerate.
cpu:
	* cpu/epiphany.cpu, cpu/epiphany.opc: New files.
gas:
	* NEWS: Mention addition of Adapteva Epiphany support.
	* config/tc-epiphany.c, config/tc-epiphany.h: New files.
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c .
	(TARGET_CPU_HFILES): Add config/tc-epiphany.h .
	* Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate.
	* configure.in: Also set using_cgen for epiphany.
	* configure.tgt: Handle epiphany.
	* doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi .
	* doc/all.texi: Set EPIPHANY.
	* doc/as.texinfo: Add EPIPHANY-specific text.
	* doc/c-epiphany.texi: New file.
	* po/gas.pot: Regenerate.
gas/testsuite:
	* gas/epiphany: New directory.
include:
	* dis-asm.h (print_insn_epiphany): Declare.
	* elf/epiphany.h: New file.
	* elf/common.h (EM_ADAPTEVA_EPIPHANY): Define.
ld:
	* NEWS: Mention addition of Adapteva Epiphany support.
	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c .
	(eelf32epiphany.c): New rule.
	* Makefile.in: Regenerate.
	* configure.tgt: Handle epiphany-*-elf.
	* po/ld.pot: Regenerate.
	* testsuite/ld-srec/srec.exp: xfail epiphany.
	* emulparams/elf32epiphany.sh: New file.
opcodes:
	* Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h .
	(TARGET_LIBOPCODES_CFILES): Add  epiphany-asm.c, epiphany-desc.c,
	epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c .
	(CLEANFILES): Add stamp-epiphany.
	(EPIPHANY_DEPS): Set.  Make CGEN-generated Epiphany files depend on it.
	(stamp-epiphany): New rule.
	* Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate.
	* configure.in: Handle bfd_epiphany_arch.
	* disassemble.c (ARCH_epiphany): Define.
	(disassembler): Handle bfd_arch_epiphany.
	* epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files.
	* epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise.
	* epiphany-opc.h: Likewise.
2011-10-25 11:18:16 +00:00
Tristan Gingold
a7142d9403 binutils/
2011-09-22  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.22.

gas/
2011-09-22  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.22.

ld/
2011-09-22  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.22.
2011-09-22 08:11:16 +00:00
Nick Clifton
90b3661c07 * NEWS: Mention addition of TILEPRO and TIKE-Gx support. 2011-06-15 09:12:09 +00:00
Tristan Gingold
44f4576731 binutils/
2010-11-05  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.21.

gas/
2010-11-05  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.21.

ld/
2010-11-05  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.21.
2010-11-05 08:33:51 +00:00
H.J. Lu
5fec85997f Move gas/ld NEWS from binutils to gas/ld. 2010-08-25 16:03:58 +00:00
Nick Clifton
1cd986c585 Add support for v850E2 and v850E2V3 2010-07-23 14:52:54 +00:00
Cary Coutant
700c406090 * gas/NEWS: Add note about --compress-debug-sections.
* gas/as.c (show_usage): Add --compress-debug-sections and
	--nocompress-debug-sections.
2010-07-15 17:45:17 +00:00
Joseph Myers
40b365969f bfd:
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo.
	(ALL_MACHINES_CFILES): Add cpu-tic6x.c.
	(BFD32_BACKENDS): Add elf32-tic6x.lo.
	(BFD32_BACKENDS_CFILES): Add elf32-tic6x.c.
	* Makefile.in: Regenerate.
	* archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New.
	(bfd_archures_list): Update.
	* config.bfd (tic6x-*-elf): New.
	* configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec):
	New.
	* configure: Regenerate.
	* cpu-tic6x.c, elf32-tic6x.c: New.
	* reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12,
	BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7,
	BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16,
	BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B,
	BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W,
	BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B,
	BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W,
	BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H,
	BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W,
	BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W,
	BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31,
	BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN,
	BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New.
	* targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New.
	(_bfd_target_vector): Update.
	* bfd-in2.h, libbfd.h: Regenerate.

binutils:
	* MAINTAINERS: Add self as TI C6X maintainer.
	* NEWS: Add news entry for TI C6X support.
	* readelf.c: Include elf/tic6x.h.
	(guess_is_rela): Handle EM_TI_C6000.
	(dump_relocations): Likewise.
	(get_tic6x_dynamic_type): New.
	(get_dynamic_type): Call it.
	(get_machine_flags): Handle EF_C6000_REL.
	(get_osabi_name): Handle machine-specific values only for relevant
	machines.  Handle C6X values.
	(get_tic6x_segment_type): New.
	(get_segment_type): Call it.
	(get_tic6x_section_type_name): New.
	(get_section_type_name): Call it.
	(is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle
	EM_TI_C6000.

gas:
	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c.
	(TARGET_CPU_HFILES): Add config/tc-tic6x.h.
	* Makefile.in: Regenerate.
	* NEWS: Add news entry for TI C6X support.
	* app.c (do_scrub_chars): Handle "||^" for TI C6X.  Handle
	TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR.  Keep spaces in
	operands if TC_KEEP_OPERAND_SPACES.
	* configure.tgt (tic6x-*-*): New.
	* config/tc-ia64.h (TC_PREDICATE_START_CHAR,
	TC_PREDICATE_END_CHAR): Define.
	* config/tc-tic6x.c, config/tc-tic6x.h: New.
	* doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi (TIC6X): Define.
	* doc/as.texinfo: Add TI C6X documentation.  Include c-tic6x.texi.
	* doc/c-tic6x.texi: New.

gas/testsuite:
	* gas/tic6x: New directory and testcases.

include:
	* dis-asm.h (print_insn_tic6x): Declare.

include/elf:
	* common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define.
	* tic6x.h: New.

include/opcode:
	* tic6x-control-registers.h, tic6x-insn-formats.h,
	tic6x-opcode-table.h, tic6x.h: New.

ld:
	* Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and
	eelf32_tic6x_le.o.
	(eelf32_tic6x_be.c, eelf32_tic6x_le.c): New.
	* NEWS: Add news entry for TI C6X support.
	* configure.tgt (tic6x-*-*): New.
	* emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New.

ld/testsuite:
	* ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*.
	* ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*.
	* ld-tic6x: New directory and testcases.

opcodes:
	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c.
	* Makefile.in: Regenerate.
	* configure.in (bfd_tic6x_arch): New.
	* configure: Regenerate.
	* disassemble.c (ARCH_tic6x): Define if ARCH_all.
	(disassembler): Handle TI C6X.
	* tic6x-dis.c: New.
2010-03-25 21:12:36 +00:00
Dave Korn
31907d5e90 gas/ChangeLog:
* NEWS: Mention new feature.
	* config/obj-coff.c (obj_coff_section): Accept digits and use
	to override default section alignment power if specified.
	* doc/as.texinfo (.section directive): Update documentation.

gas/testsuite/ChangeLog:

	* gas/pe/section-align-1.s: New test source file.
	* gas/pe/section-align-1.d: Likewise control script.
	* gas/pe/section-align-2.s: Likewise ...
	* gas/pe/section-align-2.d: ... and likewise.
	* gas/pe/pe.exp: Invoke new testcases.
2010-01-27 22:01:38 +00:00
Nick Clifton
c7927a3c0e bfd
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo.
        (ALL_MACHINES_CFILES): Add cpu-rx.c.
        (BFD32_BACKENDS): Add elf32-rx.lo.
        (BFD32_BACKENDS_CFILES): Add elf32-rx.c.
        * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx.
        Export bfd_rx_arch.
        (bfd_archures_list): Add bfd_rx_arch.
        * config.bfd: Add entry for rx-*-elf.
        * configure.in: Add entries for bfd_elf32_rx_le_vec and
        bfd_elf32_rx_be_vec.
        * reloc.c: Add RX relocations.
        * targets.c: Add RX target vectors.
        * Makefile.in: Regenerate.
        * bfd-in2.h: Regenerate.
        * configure: Regenerate.
        * libbfd.h: Regenerate.
        * cpu-rx.c: New file.
        * elf32-rx.c: New file.

binutils
        * readelf.c: Add support for RX target.
        * MAINTAINERS: Add DJ and NickC as maintainers for RX.

gas
        * Makefile.am: Add RX target.
        * configure.in: Likewise.
        * configure.tgt: Likewise.
        * read.c (do_repeat_with_expander): New function.
        * read.h: Provide a prototype for do_repeat_with_expander.
        * doc/Makefile.am: Add RX target documentation.
        * doc/all.texi: Likewise.
        * doc/as.texinfo: Likewise.
        * Makefile.in: Regenerate.
        * NEWS: Mention support for RX architecture.
        * configure: Regenerate.
        * doc/Makefile.in: Regenerate.
        * config/rx-defs.h: New file.
        * config/rx-parse.y: New file.
        * config/tc-rx.h: New file.
        * config/tc-rx.c: New file.
        * doc/c-rx.texi: New file.

gas/testsuite
        * gas/rx: New directory.
        * gas/rx/*: New set of test cases.
        * gas/elf/section2.e-rx: New expected output file.
        * gas/all/gas.exp: Add support for RX target.
        * gas/elf/elf.exp: Likewise.
        * gas/lns/lns.exp: Likewise.
        * gas/macros/macros.exp: Likewise.

include
        * dis-asm.h: Add prototype for print_insn_rx.

include/elf
        * rx.h: New file.

include/opcode
        * rx.h: New file.

ld
        * Makefile.am: Add rules to build RX emulation.
        * configure.tgt: Likewise.
        * NEWS: Mention support for RX architecture.
        * Makefile.in: Regenerate.
        * emulparams/elf32rx.sh: New file.
        * emultempl/rxelf.em: New file.

opcodes
        * Makefile.am: Add RX files.
        * configure.in: Add support for RX target.
        * disassemble.c: Likewise.
        * Makefile.in: Regenerate.
        * configure: Regenerate.
        * opc2c.c: New file.
        * rx-decode.c: New file.
        * rx-decode.opc: New file.
        * rx-dis.c: New file.
2009-09-29 14:17:19 +00:00
Tristan Gingold
81c23f829e binutils/
2009-09-04  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.20.

gas/
2009-09-04  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.20.

ld/
2009-09-04  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add marker for 2.20.
2009-09-04 08:23:49 +00:00
Michael Eager
caa03924aa Mention MicroBlaze. 2009-08-07 12:12:52 +00:00
Nick Clifton
3e7a7d11f1 * config/obj-elf.c (obj_elf_type): Add code to support a type of
gnu_unique_object.
        * doc/as.texinfo: Document new feature of .type directive.
        * NEWS: Mention support for gnu_unique_object symbol type.

        * common.h (STB_GNU_UNIQUE): Define.

        * NEWS: Mention the linker's support for symbols with a binding of
        STB_GNU_UNIQUE.

        * gas/elf/type.s: Add unique global symbol definition.
        * gas/elf/type.e: Add expected readelf output for global unique
        symbol.

        * elfcpp.h (enum STB): Add STB_GNU_UNIQUE.

        * readelf.c (get_symbol_binding): For Linux targeted files return
        UNIQUE for symbols with the STB_GNU_UNIQUE binding.
        * doc/binutils.texi: Document the meaning of the 'u' symbol
        binding in the output of nm and objdump --syms.

        * elf-bfd.h (struct elf_link_hash_entry): Add unique_global field.
        * elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols
        with the BSF_GNU_UNIQUE flag bit set.
        * elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag
        for symbols with STB_GNU_UNIQUE binding.
        * elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols
        with the STB_GNU_UNIQUE binding.
        (elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for
        symbols with STB_GNU_UNIQUE binding.  Set STB_GNU_UNIQUE for
        symbols with the unique_global field set.
        (elf_link_output_extsym): Set unique_global field for symbols with
        the STB_GNU_UNIQUE binding.
        * syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit.
        (bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE
        symbols.
        (bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE
        symbols.
        * bfd-in2.h: Regenerate.
2009-07-23 13:00:30 +00:00
Nick Clifton
c921be7d91 * config/tc-arm.c (it_fsm_post_encode): New forward declaration.
(set_it_insn_type_nonvoid): New macro.
        (emit_thumb32_expr): New function.
        (thumb_insn_size): New function.
        (emit_insn): New function.
        (s_arm_elf_inst): New function.
        (md_pseudo_table): New pseudo-opcode entries added.
        * doc/c-arm.texi: New directive added.

        * gas/arm/inst-po.d: New testcase.
        * gas/arm/inst-po.s: New file.
        * gas/arm/inst-po-2.d: New testcase.
        * gas/arm/inst-po-2.s: New file.
        * gas/arm/inst-po-2.l: New file.
        * gas/arm/inst-po-3.d: New testcase.
        * gas/arm/inst-po-3.s: New file.
        * gas/arm/inst-po-be.d: New testcase.
2009-07-09 07:52:37 +00:00
Dave Korn
c1711530e6 ==> bfd/ChangeLog <==
2009-05-19  Dave Korn  <dave.korn.cygwin@gmail.com>

	* cofflink.c (process_embedded_commands):  Ignore "-aligncomm".

==> gas/ChangeLog <==
2009-05-19  Dave Korn  <dave.korn.cygwin@gmail.com>

	* NEWS:  Mention new feature.
	* config/obj-coff.c (obj_coff_common_parse):  New function.
	(obj_coff_comm):  Likewise.
	(coff_pseudo_table):  Override default ".comm" definition on PE.
	* doc/as.texinfo:  Document new feature.

==> gas/testsuite/ChangeLog <==
2009-05-19  Dave Korn  <dave.korn.cygwin@gmail.com>

	* gas/pe/:  New directory for PE format-specific tests.
	* gas/pe/aligncomm-a.d:  New test pattern file.
	* gas/pe/aligncomm-a.s:  New test source file.
	* gas/pe/aligncomm-b.d:  New test pattern file.
	* gas/pe/aligncomm-b.s:  New test source file.
	* gas/pe/aligncomm-c.d:  New test pattern file.
	* gas/pe/aligncomm-c.s:  New test source file.
	* gas/pe/aligncomm-d.d:  New test pattern file.
	* gas/pe/aligncomm-d.s:  New test source file.
	* gas/pe/pe.exp:  New test control script.
	* lib/gas-defs.exp (is_pecoff_format):  New function.

==> ld/ChangeLog <==
2009-05-19  Dave Korn  <dave.korn.cygwin@gmail.com>

	* NEWS:  Mention new feature.
	* deffile.h (def_file_aligncomm):  Add new struct definition.
	(def_file):  Add new def_file_aligncomm member.
	* deffilep.y (%token):  Add new ALIGNCOMM token.
	(command):  Add production rule for ALIGNCOMM.
	(def_file_free):  Free any chained def_file_aligncomm structs.
	(diropts[]):  Add entry for '-aligncomm' .drectve command.
	(def_aligncomm):  New grammar function.
	* ld.texinfo:  Document new feature.
	* pe-dll.c (process_def_file):  Rename from this ...
	(process_def_file_and_drectve):  ... to this, updating all callers,
	and process any aligncomms chained to the def file after scanning
	all .drectve sections.
	(generate_edata):  Updated to match.
	(pe_dll_build_sections):  Likewise.

==> ld/testsuite/ChangeLog <==
2009-05-19  Dave Korn  <dave.korn.cygwin@gmail.com>

	* ld-pe/aligncomm-1.c:  New test source file.
	* ld-pe/aligncomm-2.c:  Likewise.
	* ld-pe/aligncomm-3.c:  Likewise.
	* ld-pe/aligncomm-4.c:  Likewise.
	* ld-pe/aligncomm.d:  New test pattern file.

	* ld-pe/direct.exp:  Deleted, and content moved into ...
	* ld-pe/pe-run.exp:  ... New common file for all PE run tests.

	* ld-pe/vers-script.exp:  Deleted, and content merged into ...
	* ld-pe/pe-compile.exp:  ... New common file for PE tests needing
	a compiler, adding aligned common tests.

	* ld-pe/pe.exp:  Update header comment.
2009-05-19 16:08:08 +00:00
Nick Clifton
d8045f234d include/elf
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * common.h (STT_GNU_IFUNC): Define.

elfcpp
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * (enum STT): Add STT_GNU_IFUNC.

gas
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * config/obj-elf.c (obj_elf_type): Add support for a
        gnu_indirect_function type.
        * config/tc-i386.c (tc_i386_fix_adjustable): Do not adjust fixups
        against indirect function symbols.
        * doc/as.texinfo (.type): Document the support for the
        gnu_indirect_function symbol type.
        * NEWS: Mention the new feature.

gas/testsuite
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * gas/elf/elf.exp: Extend type test to include an ifunc symbol.
        Provide an alternative test for targets which do not support ifunc
        symbols.
        (type.s): Add entry for an ifunc symbol.
        (type.e): Add ifunc entry to expected symbol dump.
        (section2.e-armelf): Add  entry for ifunc symbol.
        (type-noifunc.s): New file.
        (type-noifunc.e): New file.

bfd/
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs
        section pointer.
        (struct elf_obj_data): Add has_ifunc_symbols boolean.
        * elf.c (swap_out_syms): Convert BSF_GNU_INDIRECT_FUNCTION flags
        into a STT_GNU_IFUNC symbol type.
        (_bfd_elf_is_function_type): Accept STT_GNU_IFUNC as a function
        type.
        (_bfd_elf_set_osabi): Set the osasbi field to ELFOSABI_LINUX if
        the binary contains ifunc symbols.
        * elfcode.h (elf_slurp_symbol_table): Translate the STT_GNU_IFUNC
        symbol type into a BSF_GNU_INDIRECT_FUNCTION flag.
        * elf32-i386.c (is_indirect_function): New function.
        (elf_i386_check_relocs): Create an ifunc output section.
        (allocate_dynrelocs): Create dynamic relocs in the ifunc output
        section if necessary.
        (elf_i386_relocate_section): Emit a reloc against an ifunc symbol
        if necessary.
        (elf_i386_add_symbol_hook): New function. Set the
        has_ifunc_symbols field of the elf_obj_data structure if an ifunc
        symbol is encountered.
        (elf_backend_post_process_headers): Define.
        (elf_backend_add_symbol_hook): Define.
        (elf_i386_post_process_headers): Rename to
        elf_i388_fbsd_post_process_headers.
        * elf64-x86_64.c (IS_X86_64_PCREL_TYPE): New macro.
        (is_indirect_function): New function.
        (elf64_x86_64_check_relocs): Create an ifunc output section.
        (allocate_dynrelocs): Create dynamic relocs in the ifunc output
        section if necessary.
        (elf64_x86_64_relocate_section): Emit a reloc against an ifunc
        symbol if necessary.
        (elf_i386_add_symbol_hook): Set the has_ifunc_symbols field of the
        elf_obj_data structure if an ifunc symbol is encountered.
        (elf_backend_post_process_headers): Define.
        * elflink.c (_bfd_elf_adjust_dynamic_symbol): Always create a PLT
        if we have ifunc symbols to handle.
        (get_ifunc_reloc_section_name): New function.  Computes the name
        for an ifunc section.
        (_bfd_elf_make_ifunc_reloc_section): New function.  Creates a
        section to hold ifunc relocs.
        * syms.c (BSF_GNU_INDIRECT_FUNCTION): Define.
        (bfd_print_symbol_vandf): Handle ifunc symbols.
        (bfd_decode_symclass): Likewise.
        * bfd-in2.h: Regenerate.

binutils
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * readelf.c (dump_relocations): Display a relocation against an
        ifunc symbol as if it were a function invocation.
        (get_symbol_type): Handle STT_GNU_IFUNC.

ld
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * NEWS: Mention support for IFUNC symbols.

ld/testsuite
2009-04-30  Nick Clifton  <nickc@redhat.com>

        * ld-ifunc: New directory.
        * ld-ifunc/ifunc.exp: New file: Run the IFUNC tests.
        * ld-ifunc/prog.c: New file.
        * ld-ifunc/lib.c: New file.
2009-04-30 15:47:13 +00:00
Cary Coutant
92846e72ad * NEWS: Add item about discriminator support.
* dwarf2dbg.h (struct dwarf2_line_info): Add discriminator field.
	* dwarf2dbg.c (current): Add discriminator field.
	(dwarf2_where): Copy discriminator value.
	(dwarf2_consume_line_info): Set discriminator to 0.
	(dwarf2_directive_loc): Process discriminator sub-op.
	(out_leb128): New function.
	(process_entries): Output DW_LNE_set_discriminator.
	* doc/as.texinfo: Add discriminator operand to .loc directive.
	* testsuite/gas/lns/lns-common-1.d: Add test for discriminator.
	* testsuite/gas/lns/lns-common-1.s: Likewise.
2009-04-24 18:31:29 +00:00
Nick Clifton
c3b7224ae4 Add support for Score7 architecture. 2009-03-02 10:33:08 +00:00
Nick Clifton
84e94c9023 Add LM32 port. 2008-12-23 19:10:25 +00:00
Nick Clifton
0f88be7a13 Remove STT_IFUNC support. 2008-12-23 09:01:51 +00:00
Nick Clifton
e7c3341679 include/elf/
* common.h (STT_IFUNC): Define.
elfcpp/
            * elfcpp.h (enum STT): Add STT_IFUNC.
bfd/
            * syms.c (struct bfd_symbol): Add new flag BSF_INDIRECT_FUNCTION.
            Remove redundant flag BFD_FORT_COMM_DEFAULT_VALUE.  Renumber flags
            to remove gaps.
            (bfd_print_symbol_vandf): Return 'i' for BSF_INDIRECT_FUNCTION.
            (bfd_decode_symclass): Likewise.
            * elf.c (swap_out_syms): Translate BSF_INDIRECT_FUNCTION into
            STT_IFUNC.
            (elf_find_function): Treat STT_IFUNC in the same way as STT_FUNC.
            (_bfd_elf_is_function_type): Likewise.
            * elf32-arm.c (arm_elf_find_function): Likewise.
            (elf32_arm_adjust_dynamic_symbol): Likewise.
            (elf32_arm_swap_symbol_in): Likewise.
            (elf32_arm_additional_program_headers): Likewise.
            * elf32-i386.c (is_indirect_symbol): New function.
            (elf_i386_check_relocs): Also generate dynamic relocs for
            relocations against STT_IFUNC symbols.
            (allocate_dynrelocs): Likewise.
            (elf_i386_relocate_section): Likewise.
            * elf64-x86-64.c (is_indirect_symbol): New function.
            (elf64_x86_64_check_relocs): Also generate dynamic relocs for
            relocations against STT_IFUNC symbols.
            (allocate_dynrelocs): Likewise.
            (elf64_x86_64_relocate_section): Likewise.
            * elfcode.h (elf_slurp_symbol_table): Translate STT_IFUNC into
            BSF_INDIRECT_FUNCTION.
            * elflink.c (_bfd_elf_adjust_dynamic_reloc_section): Add support
            for STT_IFUNC symbols.
            (get_ifunc_reloc_section_name): New function.
            (_bfd_elf_make_ifunc_reloc_section): New function.
            * elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs field.
            * bfd-in2.h: Regenerate.
gas/
            * config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type.
            * doc/as.texinfo: Document new feature.
            * NEWS: Mention new feature.
gas/testsuite/
            * gas/elf/type.s: Add test of STT_IFUNC symbol type.
            * gas/elf/type.e: Update expected disassembly.
            * gas/elf/elf.exp: Update grep of symbol types.
ld/
            * NEWS: Mention new feature.
            * pe-dll.c (process_def_file): Replace use of redundant
            BFD_FORT_COMM_DEFAULT_VALUE with 0.
            * scripttempl/elf.sc: Add .rel.ifunc.dyn and .rela.ifunc.dyn
            sections.
ld/testsuite/
            * ld-mips-elf/reloc-1-n32.d: Updated expected output for reloc
            descriptions.
            * ld-mips-elf/reloc-1-n64.d: Likewise.
            * ld-i386/ifunc.d: New test.
            * ld-i386/ifunc.s: Source file for the new test.
            * ld-i386/i386.exp: Run the new test.
2008-12-03 14:51:00 +00:00
Daniel Jacobowitz
4f6d9c90b4 * NEWS: Mention .cfi_val_encoded_addr. 2008-09-28 15:15:32 +00:00
Tristan Gingold
6e33da127b ld/
2008-09-08  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add a marker for the 2.19 features.
gas/
2008-09-08  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add a marker for the 2.19 features.

binutils/
2008-09-08  Tristan Gingold  <gingold@adacore.com>

	* NEWS: Add a marker for the 2.19 features.
2008-09-08 08:56:57 +00:00
DJ Delorie
6fd4f6ccfe * NEWS: Mention these changes.
* config/tc-h8300.h (H_TICK_HEX): Define.
* config/tc-h8300.c (OPTION_H_TICK_HEX): New.
(md_longopts): Add "-h-tick-hex".
(md_parse_option): Support it.
* doc/c-h8300.texi (H8/300 Options): Document it.
* doc/as.texinfo (Overview): Likewise.

* config/tc-sh.h (H_TICK_HEX): Define.
* config/tc-sh.c (OPTION_H_TICK_HEX): New.
(md_longopts): Add "-h-tick-hex".
(md_parse_option): Support it.
* doc/c-sh.texi (SH Options): Document it.
* doc/c-sh64.texi (SH64 Options): Document it.
* doc/as.texinfo (Overview): Likewise.
2008-08-06 15:42:15 +00:00
H.J. Lu
f1f8f695c0 gas/
2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention XSAVE, EPT and MOVBE.

	* config/tc-i386.c (cpu_arch): Add .movbe and .ept.
	(md_show_usage): Add .movbe and .ept.

	* doc/c-i386.texi: Add movbe and ept to -march=.  Document
	.movbe and .ept.

gas/testsuite/

2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Run movbe, movbe-intel, inval-movbe, ept,
	ept-intel, inval-ept, x86-64-movbe, x86-64-movbe-intel,
	x86-64-inval-movbe.  x86-64-ept, x86-64-ept-intel and
	x86-64-inval-ept.

	* gas/i386/arch-10.s: Add movbe and invept.
	* gas/i386/x86-64-arch-2.s: Likewise.

	* gas/i386/ept.d: New file
	* gas/i386/ept-intel.d: Likewise.
	* gas/i386/ept.s: Likewise.
	* gas/i386/inval-ept.l: Likewise.
	* gas/i386/inval-ept.s: Likewise.
	* gas/i386/inval-movbe.l: Likewise.
	* gas/i386/inval-movbe.s: Likewise.
	* gas/i386/movbe.d: Likewise.
	* gas/i386/movbe-intel.d: Likewise.
	* gas/i386/movbe.s: Likewise.
	* gas/i386/x86-64-inval-ept.l: Likewise.
	* gas/i386/x86-64-inval-ept.s: Likewise.
	* gas/i386/x86-64-inval-movbe.l: Likewise.
	* gas/i386/x86-64-inval-movbe.s: Likewise.
	* gas/i386/x86-64-ept.d: Likewise.
	* gas/i386/x86-64-ept-intel.d: Likewise.
	* gas/i386/x86-64-ept.s: Likewise.
	* gas/i386/x86-64-movbe.d: Likewise.
	* gas/i386/x86-64-movbe-intel.d: Likewise.
	* gas/i386/x86-64-movbe.s: Likewise.

	* gas/i386/arch-10.d: Updated.
	* gas/i386/arch-10-1.l: Likewise.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/x86-64-arch-2.d: Likewise.

opcodes/

2008-05-02  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (MOVBE_Fixup): New.
	(Mo): Likewise.
	(PREFIX_0F3880): Likewise.
	(PREFIX_0F3881): Likewise.
	(PREFIX_0F38F0): Updated.
	(prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881.  Update
	PREFIX_0F38F0 and PREFIX_0F38F1 for movbe.
	(three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881.

	* i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and
	CPU_EPT_FLAGS.
	(cpu_flags): Add CpuMovbe and CpuEPT.

	* i386-opc.h (CpuMovbe): New.
	(CpuEPT): Likewise.
	(CpuLM): Updated.
	(i386_cpu_flags): Add cpumovbe and cpuept.

	* i386-opc.tbl: Add entries for movbe and EPT instructions.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.
2008-05-02 16:53:40 +00:00
H.J. Lu
daf50ae75d gas/
2008-04-10  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention -msse-check=[none|error|warning].

	* config/tc-i386.c (sse_check): New.
	(OPTION_MSSE_CHECK): Likewise.
	(md_assemble): Check SSE instructions if needed.
	(md_longopts): Add -msse-check.
	(md_parse_option): Handle OPTION_MSSE_CHECK.
	(md_show_usage): Show -msse-check=[none|error|warning].

	* doc/c-i386.texi: Document -msse-check=[none|error|warning].

gas/testsuite/

2008-04-10  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Run sse-check, sse-check-warn,
	sse-check-error, x86-64-sse-check, x86-64-sse-check-warn and
	x86-64-sse-check-error.

	* gas/i386/sse-check.d: New.
	* gas/i386/sse-check.s: Likewise.
	* gas/i386/sse-check-error.l: Likewise.
	* gas/i386/sse-check-error.s: Likewise.
	* gas/i386/sse-check-warn.d: Likewise.
	* gas/i386/sse-check-warn.e: Likewise.
	* gas/i386/x86-64-sse-check.d: Likewise.
	* gas/i386/x86-64-sse-check-error.l: Likewise.
	* gas/i386/x86-64-sse-check-error.s: Likewise.
	* gas/i386/x86-64-sse-check-warn.d: Likewise.
2008-04-10 17:53:40 +00:00
Nick Clifton
83f10cb26a * listing.c: Add -ag listing flag to show general information in
listings such as gas version, passed options, and time stamp.
        (listing_general_info): New function.
        (print_options): New function.
        (print_single_option): New function.
        (print_timestamp): New function.
        (MAX_DATELEN): Define.
        (listing_print): Add call to listing_general_info.
        * listing.h (LISTING_GENERAL): Define.
        (listing_print): Add new parameter.
        * as.c (show_usage): Print new switch.
        (parse_args): Parse new switch.
        (main): Pass command line on to listing_print.
        * NEWS: Mention this new feature.
        * doc/as.texinfo: Document the new sub-option.

        * gas/all/gas.exp: Check the performance of the -ag command line
        switch.
2008-04-10 12:45:18 +00:00
H.J. Lu
594ab6a333 gas/
2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention XSAVE.  Change CLMUL to PCLMUL.

	* config/tc-i386.c (cpu_arch): Add .pclmul.
	(md_show_usage): Replace clmul with pclmul.
	* doc/c-i386.texi: Likewise.

gas/testsuite/

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/arch-10-1.l: Replace CLMUL with PCLMUL.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/arch-10.s: Likewise.
	* gas/i386/clmul-intel.d: Likewise.
	* gas/i386/clmul.d: Likewise.
	* gas/i386/clmul.s: Likewise.
	* gas/i386/x86-64-arch-2.s: Likewise.
	* gas/i386/x86-64-clmul-intel.d: Likewise.
	* gas/i386/x86-64-clmul.d: Likewise.
	* gas/i386/x86-64-clmul.s: Likewise.

	* gas/i386/arch-10.d: Replace clmul with pclmul.
	* gas/i386/x86-64-arch-2.d: Likewise.

opcodes/

2008-04-04  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Replace CPU_CLMUL_FLAGS/CpuCLMUL
	with CPU_PCLMUL_FLAGS/CpuPCLMUL.
	(cpu_flags): Replace CpuCLMUL with CpuPCLMUL.
	* i386-opc.tbl: Likewise.

	* i386-opc.h (CpuCLMUL): Renamed to ...
	(CpuPCLMUL): This.
	(CpuFMA): Updated.
	(i386_cpu_flags): Replace cpuclmul with cpupclmul.

	* i386-init.h: Regenerated.
2008-04-04 16:34:23 +00:00
H.J. Lu
c0f3af977b binutils/
2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* dwarf.c (dwarf_regnames_i386): Add AVX registers.
	(dwarf_regnames_x86_64): Likewise.

gas/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.

	* doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
	Document -msse2avx, .avx, .aes, .clmul and .fma.

	* config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
	(vex_prefix): Likewise.
	(sse2avx): Likewise.
	(CPU_FLAGS_ARCH_MATCH): Likewise.
	(CPU_FLAGS_64BIT_MATCH): Likewise.
	(CPU_FLAGS_32BIT_MATCH): Likewise.
	(CPU_FLAGS_PERFECT_MATCH): Likewise.
	(regymm): Likewise.
	(vex_imm4): Likewise.
	(fits_in_imm4): Likewise.
	(build_vex_prefix): Likewise.
	(VEX_check_operands): Likewise.
	(bad_implicit_operand): Likewise.
	(OPTION_MSSE2AVX): Likewise.
	(T_YMMWORD): Likewise.
	(_i386_insn): Add vex.
	(cpu_arch): Add .avx, .aes, .clmul and .fma.
	(cpu_flags_match): Changed to take a pointer to const template.
	Enable encoding SSE instructions with VEX prefix for -msse2avx.
	(match_mem_size): Also check ymmword.
	(operand_type_match): Clear ymmword.
	(md_begin): Allow '_' in mnemonic.
	(type_names): Add OPERAND_TYPE_VEX_IMM4.
	(process_immext): Update assert.
	(md_assemble): Don't call process_immext if sse2avx and immext
	are true.  Call build_vex_prefix if vex is true.
	(parse_insn): Updated for cpu_flags_match.
	(swap_operands): Handle 5 operands.
	(match_template): Handle 5 operands. Updated for cpu_flags_match.
	Check regymm.  Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
	(process_suffix): Handle YMMWORD_MNEM_SUFFIX.
	(check_byte_reg): Check regymm.
	(process_operands): Duplicate the destination register for
	-msse2avx if needed.
	(build_modrm_byte): Updated for instructions with VEX encoding.
	(output_insn): Output VEX prefix if needed.
	(md_longopts): Add msse2avx.
	(md_parse_option): Handle OPTION_MSSE2AVX.
	(md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
	(intel_e09): Support YMMWORD.
	(intel_e11): Likewise.
	(intel_get_token): Likewise.

gas/testsuite/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* gas/i386/i386.exp: Run aes, aes-intel, x86-64-aes,
	x86-64-aes-intel, avx, avx-intel, inval-avx, x86-64-avx,
	x86-64-avx-intel and x86-64-inval-avx.

	* gas/cfi/cfi-i386.s: Add tests for AVX register maps.
	* gas/cfi/cfi-x86_64.s: Likewise.

	* gas/i386/aes.d: New.
	* gas/i386/aes.s: Likewise.
	* gas/i386/aes-intel.d: Likewise.
	* gas/i386/avx.d: Likewise.
	* gas/i386/avx.s: Likewise.
	* gas/i386/avx-intel.d: Likewise.
	* gas/i386/clmul.d: Likewise.
	* gas/i386/clmul-intel.d: Likewise.
	* gas/i386/clmul.s: Likewise.
	* gas/i386/i386.exp: Likewise.
	* gas/i386/inval-avx.l: Likewise.
	* gas/i386/inval-avx.s: Likewise.
	* gas/i386/sse2avx.d: Likewise.
	* gas/i386/sse2avx.s: Likewise.
	* gas/i386/x86-64-aes.d: Likewise.
	* gas/i386/x86-64-aes.s: Likewise.
	* gas/i386/x86-64-aes-intel.d: Likewise.
	* gas/i386/x86-64-avx.d: Likewise.
	* gas/i386/x86-64-avx.s: Likewise.
	* gas/i386/x86-64-avx-intel.d: Likewise.
	* gas/i386/x86-64-clmul.d: Likewise.
	* gas/i386/x86-64-clmul-intel.d: Likewise.
	* gas/i386/x86-64-clmul.s: Likewise.
	* gas/i386/x86-64-inval-avx.l: Likewise.
	* gas/i386/x86-64-inval-avx.s: Likewise.
	* gas/i386/x86-64-sse2avx.d: Likewise.
	* gas/i386/x86-64-sse2avx.s: Likewise.

	* gas/i386/arch-10.s: Add tests for AVX, AES, CLMUL and FMA.
	* gas/i386/x86-64-arch-2.s: Likewise.

	* gas/i386/rexw.s: Add AVX tests.

	* gas/i386/x86-64-opcode-inval.s: Remove lds/les test.

	* gas/cfi/cfi-i386.d: Updated.
	* gas/cfi/cfi-x86_64.d: Likewise.
	* gas/i386/arch-10.d:  Likewise.
	* gas/i386/arch-10-1.l: Likewise.
	* gas/i386/arch-10-2.l: Likewise.
	* gas/i386/arch-10-3.l: Likewise.
	* gas/i386/arch-10-4.l: Likewise.
	* gas/i386/rexw.d: Likewise.
	* gas/i386/x86-64-arch-2.d: Likewise.
	* gas/i386/x86-64-opcode-inval.d: Likewise.
	* gas/i386/x86-64-opcode-inval-intel.d: Likewise.

include/opcode/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.h (MAX_OPERANDS): Set to 5.
	(MAX_MNEM_SIZE): Changed to 20.

opcodes/

2008-04-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (OP_E_register): New.
	(OP_E_memory): Likewise.
	(OP_VEX): Likewise.
	(OP_EX_Vex): Likewise.
	(OP_EX_VexW): Likewise.
	(OP_XMM_Vex): Likewise.
	(OP_XMM_VexW): Likewise.
	(OP_REG_VexI4): Likewise.
	(PCLMUL_Fixup): Likewise.
	(VEXI4_Fixup): Likewise.
	(VZERO_Fixup): Likewise.
	(VCMP_Fixup): Likewise.
	(VPERMIL2_Fixup): Likewise.
	(rex_original): Likewise.
	(rex_ignored): Likewise.
	(Mxmm): Likewise.
	(XMM): Likewise.
	(EXxmm): Likewise.
	(EXxmmq): Likewise.
	(EXymmq): Likewise.
	(Vex): Likewise.
	(Vex128): Likewise.
	(Vex256): Likewise.
	(VexI4): Likewise.
	(EXdVex): Likewise.
	(EXqVex): Likewise.
	(EXVexW): Likewise.
	(EXdVexW): Likewise.
	(EXqVexW): Likewise.
	(XMVex): Likewise.
	(XMVexW): Likewise.
	(XMVexI4): Likewise.
	(PCLMUL): Likewise.
	(VZERO): Likewise.
	(VCMP): Likewise.
	(VPERMIL2): Likewise.
	(xmm_mode): Likewise.
	(xmmq_mode): Likewise.
	(ymmq_mode): Likewise.
	(vex_mode): Likewise.
	(vex128_mode): Likewise.
	(vex256_mode): Likewise.
	(USE_VEX_C4_TABLE): Likewise.
	(USE_VEX_C5_TABLE): Likewise.
	(USE_VEX_LEN_TABLE): Likewise.
	(VEX_C4_TABLE): Likewise.
	(VEX_C5_TABLE): Likewise.
	(VEX_LEN_TABLE): Likewise.
	(REG_VEX_XX): Likewise.
	(MOD_VEX_XXX): Likewise.
	(PREFIX_0F38DB..PREFIX_0F38DF): Likewise.
	(PREFIX_0F3A44): Likewise.
	(PREFIX_0F3ADF): Likewise.
	(PREFIX_VEX_XXX): Likewise.
	(VEX_OF): Likewise.
	(VEX_OF38): Likewise.
	(VEX_OF3A): Likewise.
	(VEX_LEN_XXX): Likewise.
	(vex): Likewise.
	(need_vex): Likewise.
	(need_vex_reg): Likewise.
	(vex_i4_done): Likewise.
	(vex_table): Likewise.
	(vex_len_table): Likewise.
	(OP_REG_VexI4): Likewise.
	(vex_cmp_op): Likewise.
	(pclmul_op): Likewise.
	(vpermil2_op): Likewise.
	(m_mode): Updated.
	(es_reg): Likewise.
	(PREFIX_0F38F0): Likewise.
	(PREFIX_0F3A60): Likewise.
	(reg_table): Add REG_VEX_71...REG_VEX_73 and REG_VEX_AE.
	(prefix_table): Add PREFIX_0F38DB..PREFIX_0F38DF, PREFIX_0F3ADF
	and PREFIX_VEX_XXX entries.
	(x86_64_table): Use VEX_C4_TABLE and VEX_C5_TABLE.
	(three_byte_table): Use PREFIX_0F38DB..PREFIX_0F38DF and
	PREFIX_0F3ADF.
	(mod_table): Use VEX_C4_TABLE, VEX_C5_TABLE and VEX_LEN_TABLE.
	Add MOD_VEX_XXX entries.
	(ckprefix): Initialize rex_original and rex_ignored.  Store the
	REX byte in rex_original.
	(get_valid_dis386): Handle the implicit prefix in VEX prefix
	bytes and USE_VEX_LEN_TABLE/USE_VEX_C4_TABLE/USE_VEX_C5_TABLE.
	(print_insn): Set need_vex/need_vex_reg/vex_i4_done to 0 before
	calling get_valid_dis386.  Use rex_original and rex_ignored when
	printing out REX.
	(putop): Handle "XY".
	(intel_operand_size): Handle VEX, xmm_mode, xmmq_mode and
	ymmq_mode.
	(OP_E_extended): Updated to use OP_E_register and
	OP_E_memory.
	(OP_XMM): Handle VEX.
	(OP_EX): Likewise.
	(XMM_Fixup): Likewise.
	(CMP_Fixup): Use ARRAY_SIZE.

	* i386-gen.c (cpu_flag_init): Add CpuAES, CPU_CLMUL_FLAGS,
	CPU_FMA_FLAGS and CPU_AVX_FLAGS.
	(operand_type_init): Add OPERAND_TYPE_REGYMM and
	OPERAND_TYPE_VEX_IMM4.
	(cpu_flags): Add CpuAVX, CpuAES, CpuCLMUL and CpuFMA.
	(opcode_modifiers): Add Implicit1stXmm0, Vex, Vex256, VexNDD,
	VexNDS, VexW0, VexW1, Vex0F, Vex0F38, Vex0F3A, Vex3Sources,
	VexImmExt and SSE2AVX.
	(operand_types): Add RegYMM, Ymmword and Vex_Imm4.

	* i386-opc.h (CpuAVX): New.
	(CpuAES): Likewise.
	(CpuCLMUL): Likewise.
	(CpuFMA): Likewise.
	(Vex): Likewise.
	(Vex256): Likewise.
	(VexNDS): Likewise.
	(VexNDD): Likewise.
	(VexW0): Likewise.
	(VexW1): Likewise.
	(Vex0F): Likewise.
	(Vex0F38): Likewise.
	(Vex0F3A): Likewise.
	(Vex3Sources): Likewise.
	(VexImmExt): Likewise.
	(SSE2AVX): Likewise.
	(RegYMM): Likewise.
	(Ymmword): Likewise.
	(Vex_Imm4): Likewise.
	(Implicit1stXmm0): Likewise.
	(CpuXsave): Updated.
	(CpuLM): Likewise.
	(ByteOkIntel): Likewise.
	(OldGcc): Likewise.
	(Control): Likewise.
	(Unspecified): Likewise.
	(OTMax): Likewise.
	(i386_cpu_flags): Add cpuavx, cpuaes, cpuclmul and cpufma.
	(i386_opcode_modifier): Add implicit1stxmm0, vex, vex256,
	vexnds, vexndd, vexw0, vexw1, vex0f, vex0f38, vex0f3a,
	vex3sources, veximmext and sse2avx.
	(i386_operand_type): Add regymm, ymmword and vex_imm4.

	* i386-opc.tbl: Add AES, CLMUL, AVX and FMA new instructions.

	* i386-reg.tbl: Add AVX registers, ymm0..ymm15.

	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.
2008-04-03 14:03:21 +00:00
H.J. Lu
ae40c9937a 2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention new command line options for x86 targets.
2008-01-24 22:44:37 +00:00
Nick Clifton
38a57ae7a5 * read.c (potable): Add string8, string16, string32 and string64. Add bit size for stringer function.
(stringer_append_char): New.
 (stringer): Use stringer_append_char().
* config/obj-coff.c (obj_coff_ident): Add bit size for stringer function.
* config/obj-elf.c (obj_elf_ident): Likewise.
* config/tc-alpha.c (s_alpha_stringer): Likewise.
* config/tc-dlx.c (dlx_pseudo_table): Likewise.
* config/tc-hppa.c (pa_stringer): Likewise.
* config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise.
* config/tc-m68hc11.c (md_pseudo_table): Likewise.
* config/tc-mcore.c (md_pseudo_table): Likewise.
* config/tc-mips.c (mips_pseudo_table): Likewise.
* config/tc-spu.c (md_pseudo_table): Likewise.
* config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'.
* doc/as.texinfo (ABORT): Fix identing.
  (String): Document new string8, string16, string32, string64 functions.
* NEWS: Mention the new feature.

* testsuite/gas/all/gas.exp: Include new test "strings".
* testsuite/gas/all/string.s: New
* testsuite/gas/all/string.d: New.
2007-10-04 17:05:37 +00:00
Michael Meissner
85f10a010c Add AMD SSE5 support 2007-09-14 18:21:09 +00:00
Nick Clifton
7c3d153f7d Add a marker for the 2.18 features. 2007-08-10 13:21:40 +00:00
Nick Clifton
ec2655a6a7 Switch to GPLv3 2007-07-03 11:01:12 +00:00