Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
The longest register name is 5 characters (plus a nul one), so using a
4- or 8-byte pointer to get at it is neither space nor time efficient.
Embed the names right into the array. For PIE this also reduces the
number of base relocations in the final image.
Give backends a chance to see these, just as they can see binary ones.
Most of those which use this hook already cope with NULL being passed
for the left operand (typically because of checking the operator first).
Adjust the two which don't.
Take the opportunity and also document the hook.
There are two problems: symbol_equated_p() doesn't recognize equates of
registers, and S_CAN_BE_REDEFINED() goes by section rather than by
expression type. Both together undermine .eqv and .equiv clearly meaning
to guard the involved symbols against re-definition (both ways).
To compensate pseudo_set() now using O_symbol and S_CAN_BE_REDEFINED()
now checking for O_register,
- for targets creating register symbols through symbol_{new,create}() ->
symbol_init() -> S_SET_VALUE() (alpha, arc, dlx, ia64, m68k, mips,
mmix, tic4x, tic54x, plus anything using cgen or itbl-ops), have
symbol_init() set their expressions to O_register,
- x86'es parse_register() also can't go by section anymore when
trying to "look through" equates; probably symbol_equated_p() should
have been used there from the beginning, if only that had worked for
equates of registers,
- various targets need to "look through" equates when parsing insn
operands (which also helps transitive forward equates); perhaps even
more ought to, but many don't look to consider the possibility of
register equates in the first place.
This was uncovered by code reported in PR gas/30274 (duplicating
PR gas/30272), except that there .eqv was used when really .equ was
meant. Therefore that bug report is addressed here only in so far as
gas wouldn't crash anymore; the code there still won't assemble
successfully, just that now the issues there are properly diagnosed.
It's better not to drill down into u.auxent but instead use a pointer
to the combined_entry_type. That way the fix_scnlen field is
available, and no one looking at the codes needs to wonder whether
coffsymbol (symbol_get_bfdsym (sym))->native[i + 1] is the same
auxent.
* config/tc-ppc.c (ppc_frob_symbol): Tidy XCOFF auxent access.
(ppc_adjust_symtab): Likewise.
long is a poor choice of type to store 32-bit values read from
objects files by H_GET_32. H_GET_32 doesn't sign extend so tests like
that in gdb/coffread.c for "negative" values won't work if long is
larger than 32 bits. If long is 32-bit then code needs to be careful
to not accidentally index negative array elements. (I'd rather see a
segfault on an unmapped 4G array index than silently reading bogus
data.) long is also a poor choice for x_sect.s_scnlen, which might
have 64-bit values. It's better to use unsigned exact width types to
avoid surprises.
I decided to change the field names too, which makes most of this
patch simply renaming. Besides that there are a few places where
casts are no longer needed, and where printf format strings or tests
need adjusting.
include/
* coff/internal.h (union internal_auxent): Use unsigned stdint
types. Rename l fields to u32 and u64 as appropriate.
bfd/
* coff-bfd.c,
* coff-rs6000.c,
* coff64-rs6000.c,
* coffcode.h,
* coffgen.c,
* cofflink.c,
* coffswap.h,
* peXXigen.c,
* xcofflink.c: Adjust to suit internal_auxent changes.
binutils/
* rdcoff.c: Adjust to suit internal_auxent changes.
gas/
* config/obj-coff.h,
* config/tc-ppc.c: Adjust to suit internal_auxent changes.
gdb/
* coffread.c,
* xcoffread.c: Adjust to suit internal_auxent changes.
ld/
* pe-dll.c: Adjust to suit internal_auxent changes.
PowerPC ELF always uses bfd_arch_powerpc, so we shouldn't allow the
gas -mpwr, -mpwr2 or -mpwrx options to choose bfd_arch_rs6000.
Given the possible values of ppc_cpu, I think the as_fatal at the end
of ppc_arch will never be reached, so it can be deleted and the code
simplified a little.
PR 30046
* config/tc-ppc.c (ppc_arch): Return bfd_arch_powerpc for ELF.
Delete dead code.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
I noticed recently that se_rfmci, a VLE mode instruction, was being
accepted by non-VLE cpus, and also that se_rfmci by itself in a
section did not cause SHF_PPC_VLE to be set. ie. both testcases added
by this patch fail without the changes to tc-ppc.c here.
Also, VLE, SPE2 and LSP insns were not accepted by the assembler with
-many nor were SPE2 and LSP being disassembled with -Many.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Wrap long lines. Add
vle_opcodes when PPC_OPCODE_VLE or PPC_OPCODE_ANY. Simplify
disassembler index segment checks. Add LSP and SPE2 opcodes
when PPC_OPCODE_ANY too.
(md_assemble): Correct logic adding PPC_APUINFO_VLE and
SHF_PPC_VLE.
* testsuite/gas/ppc/se_rfmci.s
* testsuite/gas/ppc/se_rfmci.d,
* testsuite/gas/ppc/se_rfmci_bad.d: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
opcodes/
* ppc-dis.c (print_insn_powerpc): Disassemble SPE2 and LSP insn
when -Many.
* ppc-opc.c (vle_opcodes <se_rfmci>): Comment.
It has bothered me for a long time that we have disabled LSP (and SPE)
tests. Also the LSP test comment indicating there is something wrong
with get_powerpc_dialect. I don't think there is. Decoding of a VLE
instruction depends on whether the processor is in VLE mode (some
processors support both VLE and standard PPC) which we flag per
section with SHF_PPC_VLE for decoding when disassembling.
Background: Some versions of powerpc e200 have "Lightweight Signal
Processing" support, examples being e200z215 and e200z425. As far as
I can tell, LSP and SPE are mutually exclusive. This seems to be
borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw"
have the same encoding. So none of the processor descriptions in
ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we
want disassembly to work. I also could not find anything to suggest
that the LSP insns are enabled only in VLE mode, which means the LSP
insns should not be in vle_opcodes.
Fix all this by moving the LSP insns to their own table, and add a new
e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from
-mvle. (Yes, I know, as I said above some of the e200z4 processors
have LSP. Others have SPE. It's hard to choose good options. Think
of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow
adding the LSP insn set.
include/
* opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare.
(LSP_OP_TO_SEG): Define.
binutils/
* doc/binutils.texi: Update ppc docs.
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash.
* doc/c-ppc.texi: Document e200 and lsp.
* testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2.
* testsuite/gas/ppc/lsp.d: Likewise, disassembly too.
* testsuite/gas/ppc/ppc.exp: Don't xfail lsp test.
opcodes/
* ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set
PPC_OPCODE_LSP for e200z4 or vle.
(ppc_parse_cpu): Mutually exclude LSP and SPE.
(LSP_OPCD_SEGS): Define.
(lsp_opcd_indices): New array.
(disassemble_init_powerpc): Init lsp_opcd_indices.
(lookup_lsp): New function.
(print_insn_powerpc): Call it.
* ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout.
(vle_opcodes): Move LSP opcodes to..
(lsp_opcodes): ..here, and sort.
(lsp_num_opcodes): New.
The last patch wasn't all that shiny. There are rather a lot more
relocations that can hit the assertion in md_apply_fix if the symbol
is local or absolute. Fix them all.
* config/tc-ppc.c (ppc_force_relocation): Add all relocs that
expect a symbol in md_apply_fix. Remove tls pcrel relocs
already covered in general tls match range.
Not that anyone would want to indirect via the GOT when an address can
be loaded directly with pla, the following:
pld 3,x@got@pcrel
x:
leads to "Internal error in md_apply_fix", because the generic parts
of assembler fixup handling convert the fx_pcrel fixup to one without
a symbol. Stop that happening.
* config/tc-ppc.c (ppc_force_relocation): Add PLT_PCREL34 and
assorted GOT_PCREL34 relocs.
The -mfuture and -Mfuture options which are used for adding potential
new ISA instructions were not documented. They also lacked a bitmask
so new instructions could not be enabled by those options. Fixed.
binutils/
* doc/binutils.texi: Document -Mfuture.
gas/
* config/tc-ppc.c: Document -mfuture
* doc/c-ppc.texi: Likewise.
include/
* opcode/ppc.h (PPC_OPCODE_FUTURE): Define.
opcodes/
* ppc-dis.c (ppc_opts) <future>: Use it.
* ppc-opc.c (FUTURE): Define.
svstep and svshape instructions subtract 1 before encoding some of the
operands. Obviously zero is not supported for these operands. Whilst
PPC_OPERAND_PLUS1 fits perfectly to mark that maximal value should be
incremented, there is no flag which marks the fact that zero values are
not allowed. This patch adds a new flag, PPC_OPERAND_NONZERO, for this
purpose.
This patch adds support for LibreSOC machine and SVP64 extension flag
for PowerPC architecture. SV (Simple-V) is a strict RISC-paradigm
Scalable Vector Extension for the Power ISA. SVP64 is the 64-bit
Prefixed instruction format implementing SV. Funded by NLnet through EU
Grants No: 825310 and 825322, SV is in DRAFT form and is to be publicly
submitted via the OpenPOWER Foundation ISA Working Group via the
newly-created External RFC Process.
For more details, visit https://libre-soc.org.
I meant to make this change before committing, to let compilers know
the code on the false branch of md_parse_name is dead.
* config/tc-ppc.c (ppc_parse_name): Return void.
* config/tc-ppc.h (md_parse_name): Always true.
(ppc_parse_name): Update prototype.
Allows register names to appear in symbol assignments, so for example
tocp = %r2
mr %r3,tocp
now assembles.
* gas/config/tc-ppc.c (REG_NAME_CNT): Delete, replace uses with
ARRAY_SIZE.
(register_name): Rename to..
(md_operand): ..this. Only handle %reg.
(cr_names): Rename to..
(cr_cond): ..this. Just keep conditions.
(ppc_parse_name): Add mode param. Search both cr_cond and
pre_defined_registers. Handle absolute and register symbol
values here rather than in expr.c:operand().
(md_assemble): Don't special case register name matching in
operands, except to set cr_operand as appropriate.
* gas/config/tc-ppc.h (md_operand): Don't define.
(md_parse_name, ppc_parse_name): Update.
* read.c (pseudo_set): Copy over entire O_register value.
* testsuite/gas/ppc/regsyms.d.
* testsuite/gas/ppc/regsyms.s: New test.
* testsuite/gas/ppc/ppc.exp: Run it.
It might be possible to hit md_end before md_begin is called, don't
segfault if so. Also, remove a useless check.
* gas/config/tc-ppc.c (insn_calloc): Remove needless overflow
check.
(ppc_md_end): Check ppc_hash before deleting. Clear ppc_hash.
Currently md_end is typically used for some final actions rather than
freeing memory like other *_end functions. Rename it to md_finish,
and rename target implementation. The renaming of target functions
makes it possible to find them all with "grep md_finish",
eg. md_mips_end is renamed to mips_md_finish, not md_mips_finish.
This patch leaves a number of md_end functions unchanged, those that
either do nothing or deallocate memory, and calls them late.
The idea here is that target maintainers implement md_end functions to
tidy memory, if anyone cares. Freeing persistent memory in gas is
not at all important, except that it can hide more important memory
leaks, those that happen once per some frequent gas operation, amongst
these unimportant memory leaks.
* as.c (main): Rename md_end to md_finish.
* config/tc-alpha.c, * config/tc-alpha.h,
* config/tc-arc.c, * config/tc-arc.h,
* config/tc-arm.c, * config/tc-arm.h,
* config/tc-csky.c, * config/tc-csky.h,
* config/tc-ia64.c, * config/tc-ia64.h,
* config/tc-mcore.c, * config/tc-mcore.h,
* config/tc-mips.c, * config/tc-mips.h,
* config/tc-mmix.c, * config/tc-mmix.h,
* config/tc-msp430.c, * config/tc-msp430.h,
* config/tc-nds32.c, * config/tc-nds32.h,
* config/tc-ppc.c, * config/tc-ppc.h,
* config/tc-pru.c, * config/tc-pru.h,
* config/tc-riscv.c, * config/tc-riscv.h,
* config/tc-s390.c, * config/tc-s390.h,
* config/tc-sparc.c, * config/tc-sparc.h,
* config/tc-tic4x.c, * config/tc-tic4x.h,
* config/tc-tic6x.c, * config/tc-tic6x.h,
* config/tc-v850.c, * config/tc-v850.h,
* config/tc-xtensa.c, * config/tc-xtensa.h,
* config/tc-z80.c, * config/tc-z80.h: Similarly.
* output-file.c (output_file_close): Call md_end.
read_symbol_name mallocs the string it returns. Free it when done.
* read.c (read_symbol_name): Free name on error path.
* config/tc-ppc.c (ppc_GNU_visibility): Free name returned from
read_symbol_name.
(ppc_extern, ppc_globl, ppc_weak): Likewise.
With the upcoming SVP64 extension[0] to PowerPC architecture, it became
evident that PowerPC operand indices no longer fit 8 bits. This patch
switches the underlying type to uint16_t, also introducing a special
typedef so that any future extension goes even smoother.
[0] https://libre-soc.org
include/
* opcode/ppc.h (ppc_opindex_t): New typedef.
(struct powerpc_opcode): Use it.
(PPC_OPINDEX_MAX): Define.
gas/
* write.h (struct fix): Increase size of fx_pcrel_adjust.
Reorganise.
* config/tc-ppc.c (insn_validate): Use ppc_opindex_t for operands.
(md_assemble): Likewise.
(md_apply_fix): Likewise. Mask fx_pcrel_adjust with PPC_OPINDEX_MAX.
(ppc_setup_opcodes): Adjust opcode index assertion.
opcodes/
* ppc-dis.c (skip_optional_operands): Use ppc_opindex_t for
operand pointer.
(lookup_powerpc, lookup_prefix, lookup_vle, lookup_spe2): Likewise.
(print_insn_powerpc): Likewise.
These were used originally to represent "# <line> <file>" constructs
inserted by (typically) compilers when pre-processing. Quite some time
ago they were replaced by .linefile though. Since the original
directives were never documented, we ought to be able to remove support
for them. As a result in a number of case function parameter aren't used
anymore and can hence be dropped.
Let's hope this stays dead, but it's here as a patch separate from
those that removed use of powerpc_macros just in case it needs to be
resurrected.
include/
* opcode/ppc.h (struct powerpc_macro): Delete declaration.
(powerpc_macros, powerpc_num_macros): Likewise..
opcodes/
* ppc-opc.c (powerpc_macros, powerpc_num_macros): Delete.
gas/
* config/tc-ppc.c (ppc_macro): Delete function.
(ppc_macro_hash): Delete.
(ppc_setup_opcodes, md_assemble): Delete macro support.
The extended instructions implemented in powerpc_macros aren't used by
the disassembler. That means instructions like "sldi r3,r3,2" appear
in disassembly as "rldicr r3,r3,2,61", which is annoying since many
other extended instructions are shown.
Note that some of the instructions moved out of the macro table to the
opcode table won't appear in disassembly, because they are aliases
rather than a subset of the underlying raw instruction. If enabled,
rotrdi, extrdi, extldi, clrlsldi, and insrdi would replace all
occurrences of rotldi, rldicl, rldicr, rldic and rldimi. (Or many
occurrences in the case of clrlsldi if n <= b was added to the extract
functions.)
The patch also fixes a small bug in opcode sanity checking.
include/
* opcode/ppc.h (PPC_OPSHIFT_SH6): Define.
opcodes/
* ppc-opc.c (insert_erdn, extract_erdn, insert_eldn, extract_eldn),
(insert_crdn, extract_crdn, insert_rrdn, extract_rrdn),
(insert_sldn, extract_sldn, insert_srdn, extract_srdn),
(insert_erdb, extract_erdb, insert_csldn, extract_csldb),
(insert_irdb, extract_irdn): New functions.
(ELDn, ERDn, ERDn, RRDn, SRDn, ERDb, CSLDn, CSLDb, IRDn, IRDb):
Define and add associated powerpc_operands entries.
(powerpc_opcodes): Add "rotrdi", "srdi", "extrdi", "clrrdi",
"sldi", "extldi", "clrlsldi", "insrdi" and corresponding record
(ie. dot suffix) forms.
(powerpc_macros): Delete same from here.
gas/
* config/tc-ppc.c (insn_validate): Don't modify value passed
to operand->insert for PPC_OPERAND_PLUS1 when calculating mask.
Handle PPC_OPSHIFT_SH6.
* testsuite/gas/ppc/prefix-reloc.d: Update.
* testsuite/gas/ppc/simpshft.d: Update.
ld/
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/notoc.d: Update.
* testsuite/ld-powerpc/notoc3.d: Update.
* testsuite/ld-powerpc/tlsdesc2.d: Update.
* testsuite/ld-powerpc/tlsget.d: Update.
* testsuite/ld-powerpc/tlsget2.d: Update.
* testsuite/ld-powerpc/tlsopt5.d: Update.
* testsuite/ld-powerpc/tlsopt6.d: Update.
Commit b25f942e18 made .machine more strict. Weaken it again.
* config/tc-ppc.c (ppc_machine): Treat an early .machine specially,
keeping sticky options to work around gcc bugs.
tc-ppc.c: In function 'ppc_comm':
tc-ppc.c:4560:40: error: 'visibility' may be used uninitialized in this function [-Werror=maybe-uninitialized]
With that fixed we hit lots of segfaults in the ld testsuite.
PR 22085
bfd/
* xcofflink.c (xcoff_link_input_bfd): Don't segfault on NULL
sym_hash.
gas/
* config/tc-ppc.c (ppc_comm): Init visibility.
In order to ease port of GNU assembly code and especially ld testsuite,
this patch allows XCOFF to accept the usual GNU syntax for visibility.
PR 22085
gas/ChangeLog:
* config/tc-ppc.c (ppc_GNU_visibility): New function.
* testsuite/gas/ppc/aix.exp: Add new tests.
* testsuite/gas/ppc/xcoff-visibility-2-32.d: New test.
* testsuite/gas/ppc/xcoff-visibility-2-64.d: New test.
* testsuite/gas/ppc/xcoff-visibility-2.s: New test.
XCOFF assembly defines the visibility using an additional argument
on several pseudo-ops: .globl, .weak, .extern and .comm.
This implies that .globl and .weak syntax is different than the
usual GNU syntax. But we want to provide compatibility with AIX
assembler, especially because GCC is generating the visibility
using this XCOFF syntax.
PR 22085
bfd/ChangeLog:
* coffcode.h (coff_write_object_contents): Change XCOFF header
vstamp field to 2.
* coffgen.c (coff_print_symbol): Increase the size for n_type.
gas/ChangeLog:
* config/tc-ppc.c (ppc_xcoff_get_visibility): New function.
(ppc_globl): New function.
(ppc_weak): New function.
(ppc_comm): Add visibility field support.
(ppc_extern): Likewise.
* testsuite/gas/all/cofftag.d: Adjust to new n_type size
providing by objdump.
* testsuite/gas/ppc/test1xcoff32.d: Likewise.
* testsuite/gas/ppc/aix.exp: Add new tests.
* testsuite/gas/ppc/xcoff-visibility-1-32.d: New test.
* testsuite/gas/ppc/xcoff-visibility-1-64.d: New test.
* testsuite/gas/ppc/xcoff-visibility-1.s: New test.
include/ChangeLog:
* coff/internal.h (SYM_V_INTERNAL, SYM_V_HIDDEN,
SYM_V_PROTECTED, SYM_V_EXPORTED, SYM_V_MASK): New defines.
* coff/xcoff.h (struct xcoff_link_hash_entry): Add visibility
field.
ld/ChangeLog:
* testsuite/ld-pe/pr19803.d: Adjust to new n_type size
providing by objdump.
This patch adds support for TLS relocation targeting C_HIDEXT symbols.
In gas, TLS relocations, except R_TLSM and R_TLMSL, must keep the value
of their target symbol.
In ld, it simply ensures that internal TLS symbols are added to the
linker hash table for xcoff_reloc_type_tls.
It also improves the tests made by both.
bfd/ChangeLog:
* coff-rs6000.c (xcoff_howto_table): Fix name of R_TLSML.
(xcoff_reloc_type_tls): Replace the error when h is NULL by
an assert.
(xcoff_complain_overflow_unsigned_func): Adjust comments.
* coff64-rs6000.c (xcoff64_howto_table): Fix name of R_TLSML.
* xcofflink.c (xcoff_link_add_symbols_to_hash_table): New
function.
(xcoff_link_add_symbols): Add C_HIDEXT TLS symbols to the linker
hash table.
gas/ChangeLog:
* config/tc-ppc.c (md_apply_fix): Enable support for TLS
relocation over internal symbols.
* testsuite/gas/ppc/aix.exp: Replace xcoff-tlms by xcoff-tls.
* testsuite/gas/ppc/xcoff-tlsm-32.d: Removed.
* testsuite/gas/ppc/xcoff-tlsm-64.d: Removed.
* testsuite/gas/ppc/xcoff-tlsm.s: Removed.
* testsuite/gas/ppc/xcoff-tls-32.d: New test.
* testsuite/gas/ppc/xcoff-tls-64.d: New test.
* testsuite/gas/ppc/xcoff-tls.s: New test.
ld/ChangeLog:
* testsuite/ld-powerpc/aix52.exp: Improve aix-tls-reloc test.
* testsuite/ld-powerpc/aix-tls-reloc.s: Likewise.
* testsuite/ld-powerpc/aix-tls-reloc-32.d: Removed.
* testsuite/ld-powerpc/aix-tls-reloc-64.d: Removed.
* testsuite/ld-powerpc/aix-tls-reloc-32.dd: New test.
* testsuite/ld-powerpc/aix-tls-reloc-32.dt: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.dd: New test.
* testsuite/ld-powerpc/aix-tls-reloc-64.dt: New test.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
Global tbss symbols weren't correctly handled and were generating
a symbol with XTY_SD instead of XTY_CM as expected.
gas/
* config/tc-ppc.c (ppc_frog_symbol): Generate a XTY_CM when
a symbol has a storage class of XMC_UL.
Most of the algorithms for XCOFF in tc-ppc.c assume that
the csects field of a ppc_xcoff_section isn't NULL.
This was already made for most of the sections with the creation
of a dummy symbol.
This patch simply mades it default when creating a xcoff_section.
gas/
* config/tc-ppc.c (ppc_init_xcoff_section): Always create
the dummy symbol.
(md_begin): Adjust ppc_init_xcoff_section call.
(ppc_comm): Likewise.
(ppc_change_csect): Likewise.
debug_abbrev doesn't use end_exp to compute its size. However, it must
be NULL. Otherwise, ppc_xcoff_end might try to access uninitialized
memory.
gas/
* config/tc-ppc.c (ppc_dwsect): Use XCNEW instead of XNEW when creating
a new subsection.
A C_BSTAT debug symbol specifies the beginning of a static block.
Its n_value is the index of the csect containing static symbols.
A C_STSYM debug symbol represents the stabstring of a statically
allocated symbol. Its n_value is the offset in the csect pointed
by the containing C_BSTAT.
These two special n_value were not correctly handled both when
generating object files with gas or when reading them with objdump.
This patch tries to improve that and, above all, to allow gas-generated
object files with such symbols to be accepted by AIX ld.
bfd/
* coff-bfd.c (bfd_coff_get_syment): Adjust n_value of symbols
having fix_value = 1 in order to be an index and not a memory
offset.
* coffgen.c (coff_get_symbol_info): Likewize.
(coff_print_symbol): Likewize.
gas/
* config/tc-ppc.c (ppc_frob_label): Don't change within if
already set.
(ppc_stabx): Remove workaround changing exp.X_add_symbol's
within.
* config/tc-ppc.h (struct ppc_tc_sy): Update comments.
* symbols.c (resolve_symbol_value): Remove symbol update
when final_val is 0 and it's an AIX debug symbol.
* testsuite/gas/ppc/aix.exp: Add new tests.
* testsuite/gas/ppc/xcoff-stsym-32.d: New test.
* testsuite/gas/ppc/xcoff-stsym-64.d: New test.
* testsuite/gas/ppc/xcoff-stsym.s: New test.
PowerPC gas and objdump for a long time have allowed certain -m/-M
options that extend a base cpu with extra functional units to be
specified before the base cpu. For example, "-maltivec -mpower4" is
the same as "-mpower4 -maltivec". See
https://sourceware.org/pipermail/binutils/2008-January/054935.html
It doesn't make as much sense that .machine keep any of these
"sticky" flags when handling a new base cpu. See gcc PR101393. I
think that instead .machine ought to override the command line.
That's what this patch does. It is still possible to extend cpu
functionality with .machine. For example the following can be
assembled when selecting a basic -mppc on the command line:
.machine power5
.machine altivec
frin 1,2
lvsr 3,4,5
Here, ".machine altivec" extends the ".machine power5" so that both
the power5 "frin" instruction and the altivec "lvsr" instruction are
enabled. Swapping the two ".machine" directives would result in
failure to assemble "lvsr".
This change will expose some assembly errors, such as the one in
glibc/sysdeps/powerpc/powerpc64/tst-ucontext-ppc64-vscr.c, a file
compiled with -maltivec but containing
asm volatile (".machine push;\n"
".machine \"power5\";\n"
"vspltisb %0,0;\n"
"vspltisb %1,-1;\n"
"vpkuwus %0,%0,%1;\n"
"mfvscr %0;\n"
"stvx %0,0,%2;\n"
".machine pop;"
: "=v" (v0), "=v" (v1)
: "r" (vscr_ptr)
: "memory");
It's just wrong to choose power5 for a bunch of altivec instructions
and in fact all of those .machine directives are unnecessary.
* config/tc-ppc.c (ppc_machine): Don't use command line
sticky options.
DWARF sections have special names on AIX which need be handled
by objdump in order to correctly print them.
This patch also adds the correlation in bfd for future uses.
bfd/
* libxcoff.h (struct xcoff_dwsect_name): Add DWARF name.
* coff-rs6000.c (xcoff_dwsect_names): Update.
* coffcode.h (sec_to_styp_flags): Likewise.
(coff_new_section_hook): Likewise.
binutils/
* dwarf.h (struct dwarf_section): Add XCOFF name.
* dwarf.c (struct dwarf_section_display): Update.
* objdump.c (load_debug_section): Add XCOFF name handler.
(dump_dwarf_section): Likewise.
gas/
* config/tc-ppc.c (ppc_change_debug_section): Update to
match new name's field.
Power10 prefixed instructions must not cross 64-byte boundaries.
This is already handled.
However, on XCOFF, the csect must be updated to match the new
alignment.
* config/tc-ppc.c (md_assemble): Update ppc_current_csect
alignment when finding prefixed instructions.
Latest gcc versions are now generating csects instead of .lcomm
for bss symbols.
Some adjustements are needed in order to handle them.
* config/tc-ppc.c (md_begin): Create bss section with dummy
symbol.
(ppc_frob_symbol): Output XTY_CM for bss csects.
(ppc_fix_adjustable): Adjust condition to avoid bss csects.
AIX ld expects the section contents for relocations BFD_RELOC_PPC_TLSM
or BFD_RELOC_PPC64_TLSM to be zero.
Actually, it seems to be the case for all the TLS relocations
generated by AIX assembly but only these two are mandatory.
* config/tc-ppc.c (md_apply_fix): Adjust addend to nullify
section contents for BFD_RELOC_PPC_TLSM or
BFD_RELOC_PPC64_TLSM.
* testsuite/gas/ppc/xcoff-tlsm-32.d: New test.
* testsuite/gas/ppc/xcoff-tlsm-64.d: New test.
* testsuite/gas/ppc/xcoff-tlsm.s: New test.
* testsuite/gas/ppc/aix.exp: Run new tests.
When built on a 32-bit host without --enable-64-bit-bfd, powerpc-linux
and other 32-bit powerpc targeted binutils fail to assemble some
power10 prefixed instructions with 34-bit fields. A typical error
seen when running the testsuite is
.../gas/testsuite/gas/ppc/prefix-pcrel.s:10: Error: bignum invalid
In practice this doesn't matter for addresses: 32-bit programs don't
need or use the top 2 bits of a d34 field when calculating addresses.
However it may matter when loading or adding 64-bit constants with
paddi. A power10 processor in 32-bit mode still has 64-bit wide GPRs.
So this patch enables limited support for O_big PowerPC operands, and
corrects sign extension of 32-bit constants using X_extrabit.
* config/tc-ppc.c (insn_validate): Use uint64_t for operand values.
(md_assemble): Likewise. Handle bignum operands.
(ppc_elf_suffix): Handle O_big. Remove unnecessary input_line_pointer
check.
* expr.c: Delete unnecessary forward declarations.
(generic_bignum_to_int32): Return uint32_t.
(generic_bignum_to_int64): Return uint64_t. Compile always.
(operand): Twiddle X_extrabit for unary '~'. Set X_unsigned and
clear X_extrabit for unary '!'.
* expr.h (generic_bignum_to_int32): Declare.
(generic_bignum_to_int64): Declare.
* testsuite/gas/ppc/prefix-pcrel.s,
* testsuite/gas/ppc/prefix-pcrel.d: Add more instructions.
