Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
Patch is adding new 'armv9-a` command line flag to -march for AArch64.
gas/
* config/tc-aarch64.c: Add 'armv9-a' command line flag.
* docs/c-aarch64.text: Update docs.
* NEWS: Update docs.
include/
* opcode/aarch64.h (AARCH64_FEATURE_V9): New define.
(AARCH64_ARCH_V9): New define.
Add elfcore_grok_solaris_note function that enables to
obtain process status, register values, and program info
from Solaris's core files.
bfd/
* elf.c (elfcore_grok_solaris_note): Solaris specific ELF
note parser. Better GDB's coredump analysis on Solaris...
(elfcore_grok_solaris_note_impl): New function.
(elfcore_grok_solaris_prstatus): New function.
(elfcore_grok_solaris_info): New function.
(elfcore_grok_solaris_lwpstatus): New function.
(elf_parse_notes): Added "CORE" groker element.
include/
* elf/common.h: Add note segment constants for core files on
Solaris systems.
Current ubsan complains on every use of __PTR_ALIGN (when ptrdiff_t is
as large as a pointer), due to making calculations relative to a NULL
pointer. This patch avoids the problem by extracting out and
simplifying __BPTR_ALIGN for the usual case. I've continued to use
ptrdiff_t here, where it might be better to throw away __BPTR_ALIGN
entirely and just assume uintptr_t exists.
* obstack.h (__PTR_ALIGN): Expand and simplify __BPTR_ALIGN
rather than calculating relative to a NULL pointer.
Similar to ARM/AARCH64, we add mapping symbols in the symbol table,
to mark the start addresses of data and instructions. The $d means
data, and the $x means instruction. Then the disassembler uses these
symbols to decide whether we should dump data or instruction.
Consider the mapping-04 test case,
$ cat tmp.s
.text
.option norelax
.option norvc
.fill 2, 4, 0x1001
.byte 1
.word 0
.balign 8
add a0, a0, a0
.fill 5, 2, 0x2002
add a1, a1, a1
.data
.word 0x1 # No need to add mapping symbols.
.word 0x2
$ riscv64-unknown-elf-as tmp.s -o tmp.o
$ riscv64-unknown-elf-objdump -d tmp.o
Disassembly of section .text:
0000000000000000 <.text>:
0: 00001001 .word 0x00001001 # Marked $d, .fill directive.
4: 00001001 .word 0x00001001
8: 00000001 .word 0x00000001 # .byte + part of .word.
c: 00 .byte 0x00 # remaining .word.
d: 00 .byte 0x00 # Marked $d, odd byte of alignment.
e: 0001 nop # Marked $x, nops for alignment.
10: 00a50533 add a0,a0,a0
14: 20022002 .word 0x20022002 # Marked $d, .fill directive.
18: 20022002 .word 0x20022002
1c: 2002 .short 0x2002
1e: 00b585b3 add a1,a1,a1 # Marked $x.
22: 0001 nop # Section tail alignment.
24: 00000013 nop
* Use $d and $x to mark the distribution of data and instructions.
Alignments of code are recognized as instructions, since we usually
fill nops for them.
* If the alignment have odd bytes, then we cannot just fill the nops
into the spaces. We always fill an odd byte 0x00 at the start of
the spaces. Therefore, add a $d mapping symbol for the odd byte,
to tell disassembler that it isn't an instruction. The behavior
is same as Arm and Aarch64.
The elf/linux toolchain regressions all passed. Besides, I also
disable the mapping symbols internally, but use the new objudmp, the
regressions passed, too. Therefore, the new objudmp should dump
the objects corretly, even if they don't have any mapping symbols.
bfd/
pr 27916
* cpu-riscv.c (riscv_elf_is_mapping_symbols): Define mapping symbols.
* cpu-riscv.h: extern riscv_elf_is_mapping_symbols.
* elfnn-riscv.c (riscv_maybe_function_sym): Do not choose mapping
symbols as a function name.
(riscv_elf_is_target_special_symbol): Add mapping symbols.
binutils/
pr 27916
* testsuite/binutils-all/readelf.s: Updated.
* testsuite/binutils-all/readelf.s-64: Likewise.
* testsuite/binutils-all/readelf.s-64-unused: Likewise.
* testsuite/binutils-all/readelf.ss: Likewise.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
pr 27916
* config/tc-riscv.c (make_mapping_symbol): Create a new mapping symbol.
(riscv_mapping_state): Decide whether to create mapping symbol for
frag_now. Only add the mapping symbols to text sections.
(riscv_add_odd_padding_symbol): Add the mapping symbols for the
riscv_handle_align, which have odd bytes spaces.
(riscv_check_mapping_symbols): Remove any excess mapping symbols.
(md_assemble): Marked as MAP_INSN.
(riscv_frag_align_code): Marked as MAP_INSN.
(riscv_init_frag): Add mapping symbols for frag, it usually called
by frag_var. Marked as MAP_DATA for rs_align and rs_fill, and
marked as MAP_INSN for rs_align_code.
(s_riscv_insn): Marked as MAP_INSN.
(riscv_adjust_symtab): Call riscv_check_mapping_symbols.
* config/tc-riscv.h (md_cons_align): Defined to riscv_mapping_state
with MAP_DATA.
(TC_SEGMENT_INFO_TYPE): Record mapping state for each segment.
(TC_FRAG_TYPE): Record the first and last mapping symbols for the
fragments. The first mapping symbol must be placed at the start
of the fragment.
(TC_FRAG_INIT): Defined to riscv_init_frag.
* testsuite/gas/riscv/mapping-01.s: New testcase.
* testsuite/gas/riscv/mapping-01a.d: Likewise.
* testsuite/gas/riscv/mapping-01b.d: Likewise.
* testsuite/gas/riscv/mapping-02.s: Likewise.
* testsuite/gas/riscv/mapping-02a.d: Likewise.
* testsuite/gas/riscv/mapping-02b.d: Likewise.
* testsuite/gas/riscv/mapping-03.s: Likewise.
* testsuite/gas/riscv/mapping-03a.d: Likewise.
* testsuite/gas/riscv/mapping-03b.d: Likewise.
* testsuite/gas/riscv/mapping-04.s: Likewise.
* testsuite/gas/riscv/mapping-04a.d: Likewise.
* testsuite/gas/riscv/mapping-04b.d: Likewise.
* testsuite/gas/riscv/mapping-norelax-04a.d: Likewise.
* testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
* testsuite/gas/riscv/no-relax-align.d: Updated.
* testsuite/gas/riscv/no-relax-align-2.d: Likewise.
include/
pr 27916
* opcode/riscv.h (enum riscv_seg_mstate): Added.
opcodes/
pr 27916
* riscv-dis.c (last_map_symbol, last_stop_offset, last_map_state):
Added to dump sections with mapping symbols.
(riscv_get_map_state): Get the mapping state from the symbol.
(riscv_search_mapping_symbol): Check the sorted symbol table, and
then find the suitable mapping symbol.
(riscv_data_length): Decide which data size we should print.
(riscv_disassemble_data): Dump the data contents.
(print_insn_riscv): Handle the mapping symbols.
(riscv_symbol_is_valid): Marked mapping symbols as invalid.
Now that ChangeLog entries are no longer used for sim patches,
this commit renames all relevant sim ChangeLog to ChangeLog-2021,
similar to what we would do in the context of the "Start of New
Year" procedure.
The purpose of this change is to avoid people merging ChangeLog
entries by mistake when applying existing commits that they are
currently working on.
Also throw in a .gitignore entry to keep people from adding new
ChangeLog files anywhere in the sim tree.
The following patch synchronizes includes/objdump/readelf with the Linux
Kernel in terms of ARM regset notes.
We're currently missing 3 of them:
NT_ARM_PACA_KEYS
NT_ARM_PACG_KEYS
NT_ARM_PAC_ENABLED_KEYS
We don't need GDB to bother with this at the moment, so this doesn't update
bfd/elf.c. If needed, we can do it in the future.
binutils/
* readelf.c (get_note_type): Handle new ARM PAC notes.
include/elf/
* common.h (NT_ARM_PACA_KEYS, NT_ARM_PACG_KEYS)
(NT_ARM_PAC_ENABLED_KEYS): New constants.
If GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS is set on any input
relocatable files:
1. Don't generate copy relocations.
2. Turn off extern_protected_data since it implies
GNU_PROPERTY_NO_COPY_ON_PROTECTED.
3. Treate reference to protected symbols with indirect external access
as local.
4. Set GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS on output.
5. When generating executable, clear this bit when there are non-GOT or
non-PLT relocations in input relocatable files without the bit set.
6. Add -z [no]indirect-extern-access to control indirect external access.
bfd/
* elf-bfd (elf_obj_tdata): Add has_indirect_extern_access.
(elf_has_indirect_extern_access): New.
* elf-properties.c (_bfd_elf_parse_gnu_properties): Set
elf_has_indirect_extern_access and elf_has_no_copy_on_protected
when seeing GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
(elf_write_gnu_propertie): Add an argument to pass link_info.
Set needed_1_p for GNU_PROPERTY_1_NEEDED in memory.
(_bfd_elf_link_setup_gnu_properties): Handle
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS for
-z indirect-extern-access. Set nocopyreloc to true and
extern_protected_data to false for indirect external access.
(_bfd_elf_convert_gnu_properties): Updated.
* elf32-i386.c (elf_i386_check_relocs): Set
non_got_ref_without_indirect_extern_access on legacy non-GOT or
non-PLT references.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (_bfd_elf_symbol_refs_local_p): Return true for
STV_PROTECTED symbols with indirect external access.
* elfxx-x86.c (_bfd_x86_elf_adjust_dynamic_symbol): Clear
indirect_extern_access for legacy non-GOT/non-PLT references.
* elfxx-x86.h (elf_x86_link_hash_entry): Add
non_got_ref_without_indirect_extern_access.
include/
* bfdlink.h (bfd_link_info): Add indirect_extern_access and
needed_1_p. Change nocopyreloc to int.
ld/
* NEWS: Mention -z [no]indirect-extern-access
* ld.texi: Document -z [no]indirect-extern-access
* ldmain.c (main): Initialize link_info.indirect_extern_access
to -1.
* emulparams/extern_protected_data.sh: Support
-z [no]indirect-extern-access.
* testsuite/ld-elf/indirect-extern-access-1.rd: New file
* testsuite/ld-elf/indirect-extern-access-1a.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-1b.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-2.rd: Likewise.
* testsuite/ld-elf/indirect-extern-access-2a.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-2b.c: Likewise.
* testsuite/ld-elf/indirect-extern-access-3.rd: Likewise.
* testsuite/ld-elf/indirect-extern-access.S: Likewise.
* testsuite/ld-elf/property-1_needed-1b.d: Likewise.
* testsuite/ld-elf/property-1_needed-1c.d: Likewise.
* testsuite/ld-x86-64/indirect-extern-access.rd: Likewise.
* testsuite/ld-x86-64/protected-data-1.h: Likewise.
* testsuite/ld-x86-64/protected-data-1a.c: Likewise.
* testsuite/ld-x86-64/protected-data-1b.c: Likewise.
* testsuite/ld-x86-64/protected-data-2a.S: Likewise.
* testsuite/ld-x86-64/protected-data-2b.S: Likewise.
* testsuite/ld-x86-64/protected-func-2a.S: Likewise.
* testsuite/ld-x86-64/protected-func-2b.S: Likewise.
* testsuite/ld-x86-64/protected-func-2c.c: Likewise.
* testsuite/ld-elf/linux-x86.exp: Run test with
GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS.
* testsuite/ld-x86-64/x86-64.exp: Run tests for protected
function and data with indirect external access.
Add GNU_PROPERTY_1_NEEDED:
#define GNU_PROPERTY_1_NEEDED GNU_PROPERTY_UINT32_OR_LO
to indicate the needed properties by the object file.
Add GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS:
#define GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS (1U << 0)
to indicate that the object file requires canonical function pointers and
cannot be used with copy relocation.
binutils/
* readelf.c (decode_1_needed): New.
(print_gnu_property_note): Handle GNU_PROPERTY_1_NEEDED.
include/
* elf/common.h (GNU_PROPERTY_1_NEEDED): New.
(GNU_PROPERTY_1_NEEDED_INDIRECT_EXTERN_ACCESS): Likewise.
ld/
* testsuite/ld-elf/property-1_needed-1a.d: New file.
* testsuite/ld-elf/property-1_needed-1.s: Likewise.
When link_info.keep_memory is true, linker caches the relocation
information and symbol tables of input files in memory. When there
are many input files with many relocations, we may run out of memory.
Add --max-cache-size=SIZE to set the maximum cache size.
bfd/
PR ld/18028
* bfd.c (bfd): Add alloc_size.
* elf-bfd.h (_bfd_elf_link_info_read_relocs): New.
* elf32-i386.c (elf_i386_check_relocs): Use _bfd_link_keep_memory.
Update cache_size.
* elf64-x86-64.c (elf_x86_64_check_relocs): Likewise.
* elflink.c (_bfd_elf_link_read_relocs): Renamed to ...
(_bfd_elf_link_info_read_relocs): This. Update cache_size.
(_bfd_elf_link_read_relocs): New.
(_bfd_elf_link_check_relocs): Call _bfd_elf_link_info_read_relocs
instead of _bfd_elf_link_read_relocs.
(elf_link_add_object_symbols): Likewise.
(elf_link_input_bfd): Likewise.
(init_reloc_cookie_rels): Likewise.
(init_reloc_cookie): Update cache_size. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(link_info_ok): New.
(elf_gc_smash_unused_vtentry_relocs): Updated. Call
_bfd_elf_link_info_read_relocs instead of
_bfd_elf_link_read_relocs.
(bfd_elf_gc_sections): Use link_info_ok. Pass &link_info_ok
to elf_gc_smash_unused_vtentry_relocs.
* libbfd-in.h (_bfd_link_keep_memory): New.
* linker.c (_bfd_link_keep_memory): New.
* opncls.c (bfd_alloc): Update alloc_size.
* bfd-in2.h: Regenerated.
* libbfd.h: Likewise.
include/
PR ld/18028
* bfdlink.h (bfd_link_info): Add cache_size and max_cache_size.
ld/
PR ld/18028
* NEWS: Mention --max-cache-size=SIZE.
* ld.texi: Document --max-cache-size=SIZE.
* ldlex.h (option_values): Add OPTION_MAX_CACHE_SIZE.
* ldmain.c: (main): Set link_info.max_cache_size to -1.
* lexsup.c (ld_options): Add --max-cache-size=SIZE.
(parse_args): Support OPTION_MAX_CACHE_SIZE.
* testsuite/ld-bootstrap/bootstrap.exp: Add test for
--max-cache-size=-1.
Although the XScale and its iwMMX extensions are implemented in the
Arm co-processor space, they are not considered to be part of the FPU
specification. In particular, they cannot be enabled or disabled via
a .fpu directive. It's therefore incorrect to strip these properties
when a new .fpu directive is encountered.
Note that the legacy Maverick co-processor is considered to be a FPU
and it is possible to control this via the .fpu directive.
include:
PR gas/28031
* opcode/arm.h (FPU_ANY): Exclude XScale-related features.
This helps these funcs get printf format checking coverage.
The sim-io.c hack as a result is a bit unfortunate, but the compiler
throws warnings when printing with empty strings. In this one case,
we actually want that due to the side-effect of the callback halting
execution for us.
This will make it easier to emulate the syscall. If the kill target
is the sim itself, don't do anything. This forces the higher layers
to make a decision as to how to handle this event: like halting the
overall engine process.
Implement GNU_PROPERTY_UINT32_AND_XXX/GNU_PROPERTY_UINT32_OR_XXX:
https://sourceware.org/pipermail/gnu-gabi/2021q1/000467.html
1. GNU_PROPERTY_UINT32_AND_LO..GNU_PROPERTY_UINT32_AND_HI
#define GNU_PROPERTY_UINT32_AND_LO 0xb0000000
#define GNU_PROPERTY_UINT32_AND_HI 0xb0007fff
A bit in the output pr_data field is set only if it is set in all
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, all input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
2. GNU_PROPERTY_UINT32_OR_LO..GNU_PROPERTY_UINT32_OR_HI
#define GNU_PROPERTY_UINT32_OR_LO 0xb0008000
#define GNU_PROPERTY_UINT32_OR_HI 0xb000ffff
A bit in the output pr_data field is set if it is set in any
relocatable input pr_data fields. If all bits in the the output
pr_data field are zero, this property should be removed from output.
If the bit is 1, some input relocatables have the feature. If the
bit is 0 or the property is missing, the info is unknown.
bfd/
* elf-properties.c (_bfd_elf_parse_gnu_properties): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
(elf_merge_gnu_properties): Likewise.
binutils/
* readelf.c (print_gnu_property_note): Handle
GNU_PROPERTY_UINT32_AND_LO, GNU_PROPERTY_UINT32_AND_HI,
GNU_PROPERTY_UINT32_OR_LO and GNU_PROPERTY_UINT32_OR_HI.
include/
* elf/common.h (GNU_PROPERTY_UINT32_AND_LO): New.
(GNU_PROPERTY_UINT32_AND_HI): Likewise.
(GNU_PROPERTY_UINT32_OR_LO): Likewise.
(GNU_PROPERTY_UINT32_OR_HI): Likewise.
ld/
* testsuite/ld-elf/property-and-1.d: New file.
* testsuite/ld-elf/property-and-1.s: Likewise.
* testsuite/ld-elf/property-and-2.d: Likewise.
* testsuite/ld-elf/property-and-2.s: Likewise.
* testsuite/ld-elf/property-and-3.d: Likewise.
* testsuite/ld-elf/property-and-3.s: Likewise.
* testsuite/ld-elf/property-and-4.d: Likewise.
* testsuite/ld-elf/property-and-empty.s: Likewise.
* testsuite/ld-elf/property-or-1.d: Likewise.
* testsuite/ld-elf/property-or-1.s: Likewise.
* testsuite/ld-elf/property-or-2.d: Likewise.
* testsuite/ld-elf/property-or-2.s: Likewise.
* testsuite/ld-elf/property-or-3.d: Likewise.
* testsuite/ld-elf/property-or-3.s: Likewise.
* testsuite/ld-elf/property-or-4.d: Likewise.
* testsuite/ld-elf/property-or-empty.s: Likewise.
The idea of this change is simple: Populate a data structure, namely
"disasm_option_and_arg_t" from "include/dis-asm.h", to encompass the
disassembly options and their possible arguments.
This will make it easier to manage or extend those options by adapting
entries in a data structure, "arc_options". There will be lesser need
to hard-code the options in the code itself. Moreover, ARC GDB will
use this population function, "disassembler_options_arc ()", to enable
the "set disassembler-option" for ARC targets. The gdb change will be
in a separate patch though.
The changes in this patch can be divided into:
1) Introduction of "disassembler_options_arc ()" that will return a
"disasm_option_and_arg_t" structure representing the disassembly
options and their likely arguments.
2) New data type "arc_options_arg_t" and new data "arc_options".
These are the internals for keeping track of options and arguments
entries that can easily be extended.
3) To print the options, the "print_arc_disassembler_options ()" has
been adjusted to use this dynamically built structure instead of having
them hard-coded inside.
To see this in effect, one can look into the output of:
$ ./binutils/objdump --help
...
The following ARC specific disassembler options are...
...
include/ChangeLog:
* dis-asm.h (disassembler_options_arc): New prototype.
opcodes/ChangeLog:
* arc-dis.c (arc_option_arg_t): New enumeration.
(arc_options): New variable.
(disassembler_options_arc): New function.
(print_arc_disassembler_options): Reimplement in terms of
"disassembler_options_arc".
Remove the hack used for MIPSr6 ISA exclusion from `cpu_is_member' and
handle the exclusion for any ISA levels properly in `opcode_is_member'.
Flatten the structure of the `if' statements there. No functional
change for the existing opcode tables.
include/
* opcode/mips.h (cpu_is_member): Remove code for MIPSr6 ISA
exclusion.
(opcode_is_member): Handle ISA level exclusion.
In preparation for the next change factor out code for ISA matching
against instruction flags used in MIPS opcode tables, similarly to how
CPU matching is already done. No functional change, though for clarity
split the single `if' statement into multiple ones and use temporaries
rather than repeated expressions.
include/
* opcode/mips.h (isa_is_member): New inline function, factored
out from...
(opcode_is_member): ... here.
The CP0 control register set has never been defined, however encodings
for the CFC0 and CTC0 instructions remained available for implementers
up until the MIPS32 ISA declared them invalid and causing the Reserved
Instruction exception[1]. Therefore we handle them for both assembly
and disassembly, however in the latter case the names of CP0 registers
from the regular set are incorrectly printed if named registers are
requested. This is because we do not define separate operand classes
for coprocessor regular and control registers respectively, which means
the disassembler has no way to tell the two cases apart. Consequently
nonsensical disassembly is produced like:
cfc0 v0,c0_random
Later the MIPSr5 ISA reused the encodings for XPA ASE MFHC0 and MTHC0
instructions[2] although it failed to document them in the relevant
opcode table until MIPSr6 only.
Correct the issue then by defining a new register class, OP_REG_CONTROL,
and corresponding operand codes, `g' and `y' for the two positions in
the machine instruction a control register operand can take. Adjust the
test cases affected accordingly.
While at it swap the regular MIPS opcode table "cfc0" and "ctc0" entries
with each other so that they come in the alphabetical order.
References:
[1] "MIPS32 Architecture For Programmers, Volume II: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 1.00, August 29, 2002, Table A-9 "MIPS32 COP0 Encoding of
rs Field", p. 242
[2] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Section 3.2 "Alphabetical List of
Instructions", pp. 195, 216
include/
* opcode/mips.h: Document `g' and `y' operand codes.
(mips_reg_operand_type): Add OP_REG_CONTROL enumeration
constant.
gas/
* tc-mips.c (convert_reg_type) <OP_REG_CONTROL>: New case.
(macro) <M_TRUNCWS, M_TRUNCWD>: Use the `g' rather than `G'
operand code.
opcodes/
* mips-dis.c (print_reg) <OP_REG_COPRO>: Move control register
handling code over to...
<OP_REG_CONTROL>: ... this new case.
* mips-opc.c (decode_mips_operand) <'g', 'y'>: New cases.
(mips_builtin_opcodes): Update "cfc1", "ctc1", "cttc1", "cttc2",
"cfc0", "ctc0", "cfc2", "ctc2", "cfc3", and "ctc3" entries
replacing the `G' operand code with `g'. Update "cftc1" and
"cftc2" entries replacing the `E' operand code with `y'.
* micromips-opc.c (decode_micromips_operand) <'g'>: New case.
(micromips_opcodes): Update "cfc1", "cfc2", "ctc1", and "ctc2"
entries replacing the `G' operand code with `g'.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: Correct CFC0
operand disassembly.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: Likewise.
In the operand handling rewrite made for the MIPS disassembler with
commit ab90248154 ("Add structures to describe MIPS operands"),
<https://sourceware.org/ml/binutils/2013-07/msg00135.html>, the `g'
operand code has become redundant for the regular MIPS instruction set
by duplicating the OP_REG_COPRO semantics of the `G' operand code.
Later commit 351cdf24d2 ("Implement O32 FPXX, FP64 and FP64A ABI
extensions") converted the CTTC1 instruction from the `g' to the `G'
operand code, but still left a few instructions behind.
Convert the three remaining instructions still using the `g' code then,
namely: CTTC2, MTTC2 and MTTHC2, and remove all traces of the operand
code, freeing it up for other use.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Switch "cttc2", "mttc2",
and "mtthc2" to using the `G' rather than `g' operand code for
the coprocessor control register referred.
include/
* opcode/mips.h: Complement change made to opcodes and remove
references to the `g' regular MIPS ISA operand code.
commit a7664973b2
Author: Jan Beulich <jbeulich@suse.com>
Date: Mon Apr 26 10:41:35 2021 +0200
x86: correct overflow checking for 16-bit PC-relative relocs
caused linker failure when building 16-bit program in a 32-bit ELF
container. Update GNU_PROPERTY_X86_FEATURE_2_USED with
#define GNU_PROPERTY_X86_FEATURE_2_CODE16 (1U << 12)
to indicate that 16-bit mode instructions are used in the input object:
https://groups.google.com/g/x86-64-abi/c/UvvXWeHIGMA
to indicate that 16-bit mode instructions are used in the object to
allow linker to properly perform relocation overflow check for 16-bit
PC-relative relocations in 16-bit mode instructions.
1. Update x86 assembler to always generate the GNU property note with
GNU_PROPERTY_X86_FEATURE_2_CODE16 for .code16 in ELF object.
2. Update i386 and x86-64 linkers to use 16-bit PC16 relocations if
input object is marked with GNU_PROPERTY_X86_FEATURE_2_CODE16.
bfd/
PR ld/27905
* elf32-i386.c: Include "libiberty.h".
(elf_howto_table): Add 16-bit R_386_PC16 entry.
(elf_i386_rtype_to_howto): Add a BFD argument. Use 16-bit
R_386_PC16 if input has 16-bit mode instructions.
(elf_i386_info_to_howto_rel): Update elf_i386_rtype_to_howto
call.
(elf_i386_tls_transition): Likewise.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (x86_64_elf_howto_table): Add 16-bit
R_X86_64_PC16 entry.
(elf_x86_64_rtype_to_howto): Use 16-bit R_X86_64_PC16 if input
has 16-bit mode instructions.
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Set
elf_x86_has_code16 if relocatable input is marked with
GNU_PROPERTY_X86_FEATURE_2_CODE16.
* elfxx-x86.h (elf_x86_obj_tdata): Add has_code16.
(elf_x86_has_code16): New.
binutils/
PR ld/27905
* readelf.c (decode_x86_feature_2): Support
GNU_PROPERTY_X86_FEATURE_2_CODE16.
gas/
PR ld/27905
* config/tc-i386.c (set_code_flag): Update x86_feature_2_used
with GNU_PROPERTY_X86_FEATURE_2_CODE16 for .code16 in ELF
object.
(set_16bit_gcc_code_flag): Likewise.
(x86_cleanup): Always generate the GNU property note if
x86_feature_2_used isn't 0.
* testsuite/gas/i386/code16-2.d: New file.
* testsuite/gas/i386/code16-2.s: Likewise.
* testsuite/gas/i386/x86-64-code16-2.d: Likewise.
* testsuite/gas/i386/i386.exp: Run code16-2 and x86-64-code16-2.
include/
PR ld/27905
* elf/common.h (GNU_PROPERTY_X86_FEATURE_2_CODE16): New.
ld/
PR ld/27905
* testsuite/ld-i386/code16.d: New file.
* testsuite/ld-i386/code16.t: Likewise.
* testsuite/ld-x86-64/code16.d: Likewise.
* testsuite/ld-x86-64/code16.t: Likewise.
* testsuite/ld-i386/i386.exp: Run code16.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
The official name for Loongson Architecture is LoongArch, it is better
to use LoongArch instead of Loongson Loongarch for EM_LOONGARCH to avoid
confusion and keep consistent with the various of software in the future.
The official documentation in Chinese:
http://www.loongson.cn/uploadfile/cpu/LoongArch.pdf
The translated version in English:
https://loongson.github.io/LoongArch-Documentation/
binutils/
* readelf.c (get_machine_name): Change Loongson Loongarch to
LoongArch.
include/
* elf/common.h (EM_LOONGARCH): Change Loongson Loongarch to
LoongArch.
Rather than rely on off_t being the right size between the host &
target, have the interface always be 64-bit. We can figure out if
we need to truncate when actually outputting it to the right target.
PR sim/27705
Rather than rely on time_t being the right size between the host &
target, have the interface always be 64-bit. We can figure out if
we need to truncate when actually outputting it to the right target.
The gdb/callback.h & gdb/remote-sim.h headers have nothing to do with
gdb and are really definitions for the libsim API under the sim/ tree.
While gdb uses those headers as a client, it's not specific to it. So
create a new sim/ namespace and move the headers there.
