The base register operand B may be omitted in D(B) by coding D and in
D(L,B) by coding D(L). The index register operand X may be omitted in
D(X,B) by coding D(B) or explicitly omitted by coding D(,B). In both
cases the omitted base register operand value defaults to zero.
Allow to explicitly omit the base register operand B in D(X,B) and
D(L,B) by coding D(X,) and D(L,). Default the omitted base register
operand value to zero.
gas/
* config/tc-s390.c: Allow to explicitly omit the base register
operand in assembly.
* NEWS: Mention that the base register now may be omitted on
s390.
* gas/testsuite/gas/s390/zarch-base-index-0.s: Update test cases
for change to allow to explicitly omit the base register
operand in assembly.
* gas/testsuite/gas/s390/zarch-base-index-0.d: Likewise.
* gas/testsuite/gas/s390/zarch-base-index-0-err.s: Likewise.
* gas/testsuite/gas/s390/zarch-base-index-0-err.l: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index.s: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index.d: Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.l:
Likewise.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Print a warning message when the register type of a specified register
name does not match with the operand's register type:
operand {#}: expected {access|control|floating-point|general|vector}
register name [as {base|index} register]
Introduce a s390-specific assembler option "warn-regtype-mismatch"
with the values "strict", "relaxed", and "no" as well as an option
"no-warn-regtype-mismatch" which control whether the assembler
performs register name type checks and generates above warning messages.
warn-regtype-mismatch=strict:
Perform strict register name type checks.
warn-regtype-mismatch=relaxed:
Perform relaxed register name type checks, which allow floating-point
register (FPR) names %f0 to %f15 to be specified as argument to vector
register (VR) operands and vector register (VR) names %v0 to %v15 to
be specified as argument to floating-point register (FPR) operands.
This is acceptable as the FPRs are embedded into the lower halves of
the VRs. Make "relaxed" the default, as GCC generates assembler code
using FPR and VR interchangeably, which would cause assembler warnings
to be generated with "strict".
warn-regtype-mismatch=no:
no-warn-regtype-mismatch:
Disable any register name type checks.
Tag .insn pseudo mnemonics as such, to skip register name type checks
on those. They need to be skipped, as there do not exist .insn pseudo
mnemonics for every possible operand register type combination. Keep
track of the currently parsed operand number to provide it as reference
in warning messages.
To verify that the introduction of this change does not unnecessarily
affect the compilation of existing code the GNU Binutils, GNU C Library,
and Linux Kernel have been build with the new assembler, verifying that
the assembler did not generate any of the new warning messages.
gas/
* config/tc-s390.c: Handle new assembler options
"[no]warn-regtype-mismatch[=strict|relaxed|no". Annotate
parsed register expressions with register type. Keep track of
operand number being parsed. Print warning message in case of
register type mismatch between instruction operand and parsed
register expression.
* doc/as.texi: Document new s390-specific assembler options
"[no-]warn-regtype-mismatch[=strict|relaxed|no]".
* NEWS: Mention new s390-specific register name type checks and
related assembler option "warn-regtype-mismatch=strict|
relaxed|no".
* testsuite/gas/s390/s390.exp: Add test cases for new assembler
option "warn-regtype-mismatch={strict|relaxed}".
* testsuite/gas/s390/esa-g5.s: Fix register types in tests for
didbr, diebr, tbdr, and tbedr.
* testsuite/gas/s390/zarch-z13.s: Fix register types in tests
for vgef, vgeg, vscef, and vsceg.
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.s:
Tests for assembler option "warn-regtype-mismatch=strict".
* testsuite/gas/s390/zarch-warn-regtype-mismatch-strict.l:
Likewise.
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.s:
Tests for assembler option "warn-regtype-mismatch=relaxed".
* gas/testsuite/gas/s390/zarch-warn-regtype-mismatch-relaxed.l:
Likewise.
* gas/testsuite/gas/s390/zarch-omitted-base-index-err.s: Update
test cases for assembler option "warn-regtype-mismatch"
defaulting to "relaxed".
* testsuite/gas/s390/zarch-omitted-base-index-err.l: Likewise.
include/
* opcode/s390.h (S390_INSTR_FLAG_PSEUDO_MNEMONIC): Add
instruction flag to tag .insn pseudo-mnemonics.
opcodes/
* s390-opc.c (s390_opformats): Tag .insn pseudo-mnemonics as
such.
Reviewed-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
... plus the SME part of B16B16. As per
https://sourceware.org/pipermail/binutils/2024-February/132408.html
SVE2.1 support is both incomplete and buggy. SME2.1 "support" goes as
far as a single instruction (a subset of movaz forms) only. The SME part
of B16B16 is entirely missing.
Hi,
This patch add support for FEAT_SVE2p1 (SVE2.1 Extension) feature
along with +sve2p1 optional flag to enabe this feature.
Also support for following SVE2p1 instructions is added
addqv, andqv, smaxqv, sminqv, umaxqv, uminqv and uminqv.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
Hi,
This patch add support for FEAT_SME2p1 and "movaz" instructions
along with the optional flag +sme2p1.
Following "movaz" instructions are add:
Move and zero two ZA tile slices to vector registers.
Move and zero four ZA tile slices to vector registers.
Regression testing for aarch64-none-elf target and found no regressions.
Ok for binutils-master?
Regards,
Srinath.
This patch adds AArch32 support for -march=armv8.9-a and
-march=armv9.4-a. The behaviour of the new options can be
expressed using a combination of existing feature flags
and tables.
The cpu_arch_ver entries for ARM_ARCH_V9_4A and ARM_ARCH_V8_9A
are technically redundant but it including them for macro code
consistency across architectures.
Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
Hi,
This patch adds support for the Cortex-X3 CPU to binutils.
Gas regression testing for aarch64-none-linux-gnu target and found no regressions.
Ok for binutils-master? I don't have commit access so I need someone to commit on my behalf.
Regards,
Matthieu.
SiFive has define as set of flexible instruction for extending vector
coprocessor, it able to encoding opcode like .insn but with predefined
format.
List of instructions:
sf.vc.x
sf.vc.i
sf.vc.vv
sf.vc.xv
sf.vc.iv
sf.vc.fv
sf.vc.vvv
sf.vc.xvv
sf.vc.ivv
sf.vc.fvv
sf.vc.vvw
sf.vc.xvw
sf.vc.ivw
sf.vc.fvw
sf.vc.v.x
sf.vc.v.i
sf.vc.v.vv
sf.vc.v.xv
sf.vc.v.iv
sf.vc.v.fv
sf.vc.v.vvv
sf.vc.v.xvv
sf.vc.v.ivv
sf.vc.v.fvv
sf.vc.v.vvw
sf.vc.v.xvw
sf.vc.v.ivw
sf.vc.v.fvw
Spec of Xsfvcp
https://www.sifive.com/document-file/sifive-vector-coprocessor-interface-vcix-software
Co-authored-by: Hau Hsu <hau.hsu@sifive.com>
Co-authored-by: Kito Cheng <kito.cheng@sifive.com>
This patch makes the BPF assembler to support double-slash line
comments, like the llvm BPF assembler does. At this point both
assemblers support the same commenting styles:
- Line comments preceded by # or //.
- Non-nestable block comments delimited by /* and */.
This patch also adds a couple of tests to make sure all the comment
styles work in both normal and pseudoc syntax. The manual is also
updated to mention double-slash line comments.
While for some of the macro insns using x0 is kind of okay, as they
would merely resolve to a sequence of hint insns (and hence not cause
misbehavior at runtime), several of them have the degenerate AUIPC
followed by a load, store, or branch using other than the designated
symbol as address and hence causing runtime issues. Refuse to assemble
those, leveraging that the matching function so far wasn't really used
for macro insns: NULL is now allowed, indicating a match (which imo is
preferable over converting match_never() to match_always()), while
other matching functions now (also) used for macro insns need to avoid
calling match_opcode().
Note that for LA the restriction is slightly too strict: In non-PIC mode
using x0 would be okay-ish as per above (as it's just LLA there). Yet
libopcodes doesn't know what mode gas is presently assembling for, so we
want to err on the safe side.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
T-Head has a range of vendor-specific instructions ([2]).
Therefore it makes sense to group them into smaller chunks
in form of vendor extensions.
This patch adds the "XTheadVector" extension, a collection of
T-Head-specific vector instructions. The 'th' prefix and the
"XTheadVector" extension are documented in a PR for the RISC-V
toolchain conventions ([1]).
Here are some things that need to be explained:
The "XTheadVector" extension is not a custom-extension, but
a non-standard non-conforming extension. The encoding space
of the "TheadVector" instructions overlaps with those of
the 'V' extension. This encoding space conflict is not on
purpose, but the result of issues in the past that have
been resolved since. Therefore, the "XTheadVector" extension
and the 'V' extension are in conflict.
[1] https://github.com/riscv-non-isa/riscv-toolchain-conventions/pull/19
[2] https://github.com/T-head-Semi/thead-extension-spec/releases/download/2.3.0/xthead-2023-11-10-2.3.0.pdf
Co-developed-by: Lifang Xia <lifang_xia@linux.alibaba.com>
Co-developed-by: Christoph Müllner <christoph.muellner@vrull.eu>
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_check_conflicts): The
"XTheadVector" extension and the 'V' extension are in conflict.
(riscv_multi_subset_supports): Likewise..
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* doc/c-riscv.texi:
* testsuite/gas/riscv/x-thead-vector-fail.d: New test.
* testsuite/gas/riscv/x-thead-vector-fail.l: New test.
* testsuite/gas/riscv/x-thead-vector.s: New test.
include/ChangeLog:
* opcode/riscv.h (enum riscv_insn_class):
This patch also adds support for:
1. FEAT_RASv2 feature and "ERXGSR_EL1" system register.
RASv2 feature is enabled by passing +rasv2 to -march
(eg: -march=armv8-a+rasv2).
2. FEAT_SCTLR2 and following system registers.
SCTLR2_EL1, SCTLR2_EL12, SCTLR2_EL2 and SCTLR2_EL3.
3. FEAT_FGT2 and following system registers.
HDFGRTR2_EL2, HDFGWTR2_EL2, HFGRTR2_EL2, HFGWTR2_EL2
4. FEAT_PFAR and following system registers.
PFAR_EL1, PFAR_EL2 and PFAR_EL12.
FEAT_RASv2, FEAT_SCTLR2, FEAT_FGT2 and FEAT_PFAR features are by default
enabled from Armv9.4-A architecture.
This patch also adds support for two read only system registers
id_aa64mmfr3_el1 and id_aa64mmfr4_el1, which are available from
Armv8-A Architecture.
This patch adds for Guarded Control Stack Extension (GCS) extension. GCS feature is
optional from Armv9.4-A architecture and enabled by passing +gcs option to -march
(eg: -march=armv9.4-a+gcs) or using ".arch_extension gcs" directive in the assembly file.
Also this patch adds support for GCS instructions gcspushx, gcspopcx, gcspopx,
gcsss1, gcsss2, gcspushm, gcspopm, gcsstr and gcssttr.
This patch adds support for Check Feature Status Extension (CHK) which
is mandatory from Armv8.0-A. Also this patch supports "chkfeat" instruction
(hint #40).
Recognize "/<number>" suffixes on both -march=+avx10.1 and the
corresponding .arch directive, setting an upper bound on the vector size
that insns may use. Such a restriction can be reset by setting a new base
architecture, by using a suffix-less form, by disabling AVX10, or by
enabling any other VEX/EVEX-based vector extension.
While for most insns we can suppress their use with too wide operands
via registers becoming unavailable (or in Intel syntax memory operand
size specifiers not being recognized), mask register insns have to have
their minimum required vector size specified in a new attribute. (Of
course this new attribute could also be used on other insns.)
Note that .insn continues to be permitted to emit EVEX{512,256} (and
VEX256 ones) encodings regardless of vector size restrictions in place.
Of course these can't be expressed using zmm (or ymm) operands then,
but need using the EVEX.512.* forms (broadcast forms may be usable right
now, but this may go away so shouldn't be relied upon). This is why no
assertions should be added to build_{e,}vex_prefix().
This patch adds support for the Cortex-A720 CPU to binutils.
bfd/ChangeLog:
* cpu-aarch64.c: Add Cortex-A720.
gas/ChangeLog:
* NEWS: Update docs.
* config/tc-aarch64.c: Add Cortex-A720.
* doc/c-aarch64.texi: Update docs.
* testsuite/gas/aarch64/cpu-cortex-a720.d: New test.
This patch adds support for the Cortex-A520 CPU to gas.
No regressions on aarch64-none-elf.
gas/ChangeLog:
* NEWS: Update docs.
* config/tc-aarch64.c: Add Cortex-A520.
* doc/c-aarch64.texi: Update docs.
