Provide explicit control over the program's environment with the
basic set/unset/clear options. These are a bit clunky to use,
but they're functional.
The env set operation is split out into a separate function as it'll
be used in the next commit.
With these in place, we can adjust the custom cris testsuite to use
the now standard options and not its one-off hack.
Now that we have access to the argv & envp strings, finish implementing
these syscalls. Delete unused variables, fix tbuf by incrementing the
pointer instead of setting to the length, and make sure we don't write
more data than the bufsize says is available.
We've been passing the environment strings to sim_create_inferior,
but most ports don't do anything with them. A few will use ad-hoc
logic to stuff the stack for user-mode programs, but that's it.
Let's formalize this across the board by storing the strings in the
normal sim state. This will allow (in future commits) supporting
more functionality in the run interface, and to unify some of the
libgloss syscalls.
Add instructions in k-ext, some instruction in zbkb, zbkc is reuse from
zbb,zbc, we just change the class attribute to make them both support.
The 'aes64ks1i' and 'aes64ks2' instructions are present in both the Zknd
and Zkne extensions on rv64. Add new operand letter 'y' to present 'bs'
symbol and 'Y' to present 'rnum' symbolc for zkn instructions. Also add
a new Entropy Source CSR define 'seed' located at address 0x015.
bfd/
* elfxx-riscv.c (riscv_multi_subset_supports): Added support for
crypto extension.
gas/
*config/tc-riscv.c (enum riscv_csr_class): Added CSR_CLASS_ZKR.
(riscv_csr_address): Checked for CSR_CLASS_ZKR.
(validate_riscv_insn): Added y and Y for bs and rnum operands.
(riscv_ip): Handle y and Y operands.
include/
* opcode/riscv-opc.h: Added encodings of crypto instructions.
Also defined new csr seed, which address is 0x15.
* opcode/riscv.h: Defined OP_* and INSN_CLASS_* for crypto.
opcodes/
* riscv-dis.c (print_insn_args): Recognized new y and Y operands.
* riscv-opc.c (riscv_opcodes): Added crypto instructions.
Minimal support of scalar crypto extension, add "k" in the
riscv_supported_std_ext, to make the order check right with
"zk" behind "zb".
bfd/
* elfxx-riscv.c (riscv_implicit_subsets): Added implicit
rules for zk* extensions.
(riscv_supported_std_ext): Added entry for k.
(riscv_supported_std_z_ext): Added entries for zk*.
As discussed here [1], do some re-work in the "set debuginfod commands".
First, use "set debuginfod enabled on/off/ask" instead of "set
debuginfod on/off/ask". This is more MI-friendly, and it gives an
output that makes more sense in "info set", for example.
Then, make the show commands not call "error" when debuginfod support is
not compiled in. This makes the commands "show" and "show debuginfod"
stop early, breaking gdb.base/default.exp:
Running /home/smarchi/src/binutils-gdb/gdb/testsuite/gdb.base/default.exp ...
FAIL: gdb.base/default.exp: info set
FAIL: gdb.base/default.exp: show
- Make the "debuginfod enabled" setting default to "off" when debuginfod
support is not compiled in, and "ask" otherwise.
- Make the setter of "debuginfod enabled" error out when debuginfod
support is not compiled in, so that "debuginfod enabled" will always
remain "off" in that case.
- Make the setter of "debuginfod verbose" work in any case. I don't
see the harm in letting the user change that setting, since the user will
hit an error if they try to enable the use of debuginfod.
- I would do the same for the "debuginfod urls" setter, but because
this one needs to see the DEBUGINFOD_URLS_ENV_VAR macro, provided by
libdebuginfod, I made that one error out as well if debuginfod
support is not compiled it (otherwise, I would have left it like
"debuginfod verbose". Alternatively, we could hard-code
"DEBUGINFOD_URLS" in the code (in fact, it was prior to this patch,
but I think it was an oversight, as other spots use
DEBUGINFOD_URLS_ENV_VAR), or use a dummy string to store the setting,
but I don't really see the value in that.
Rename debuginfod_enable to debuginfod_enabled, just so it matches the
setting name.
[1] https://sourceware.org/pipermail/gdb-patches/2021-October/182937.html
Change-Id: I45fdb2993f668226a5639228951362b7800f09d5
Co-Authored-By: Aaron Merey <amerey@redhat.com>
Commit 345bd07cce ("gdb: fix gdbarch_tdep ODR violation") forgot to
update the gdbarch_tdep calls in the native files other than x86-64
Linux. This patch updates them all (to the best of my knowledge).
These are the files I was able to build-test:
aarch64-linux-nat.c
amd64-bsd-nat.c
arm-linux-nat.c
ppc-linux-nat.c
windows-nat.c
xtensa-linux-nat.c
And these are the ones I could not build-test:
aix-thread.c
arm-netbsd-nat.c
ppc-fbsd-nat.c
ppc-netbsd-nat.c
ia64-tdep.c (the part that needs libunwind)
ppc-obsd-nat.c
rs6000-nat.c
If there are still some build problems related to gdbarch_tdep in them,
they should be pretty obvious to fix.
Change-Id: Iaa3d791a850e4432973757598e634e3da6061428
While build-testing this file, the compiler complained about these two
unused variables, remove them.
Change-Id: I3c54f779f12c16ef6184af58aca75eaad042ce4e
This file is currently not compiled in an --enable-targets=all build,
but it should be. Add it to ALL_TARGET_OBS.
Update the gdbarch_tdep call that commit 345bd07cce ("gdb: fix
gdbarch_tdep ODR violation") forgot to update.
Change-Id: I86248a01493eea5e70186e9c46a298ad3994b034
I've left SiFive and have a new gmail account because it is convenient
to use with git send-email. I'm planning to use this for my RISC-V
work. My tuliptree address still works, it just isn't as convenient.
binutils:
* MAINTAINERS (RISC-V): Update my address.
The test-case gdb.base/foll-vfork.exp contains:
...
if [gdb_debug_enabled] {
untested "debug is enabled"
return 0
}
...
To understand what it does, I disabled this bit and ran with GDB_DEBUG=infrun,
like so:
...
$ cd $build/gdb/testsuite
$ make check GDB_DEBUG=infrun RUNTESTFLAGS=gdb.base/foll-vfork.exp
...
and ran into:
...
(gdb) PASS: gdb.base/foll-vfork.exp: exec: \
vfork parent follow, through step: set follow-fork parent
next^M
33 if (pid == 0) {^M
(gdb) FAIL: gdb.base/foll-vfork.exp: exec: \
vfork parent follow, through step: step
...
The problem is that the test-case expects:
...
(gdb) PASS: gdb.base/foll-vfork.exp: exec: \
vfork parent follow, through step: set follow-fork parent
next^M
[Detaching after vfork from child process 28169]^M
33 if (pid == 0) {^M
(gdb) PASS: gdb.base/foll-vfork.exp: exec: \
vfork parent follow, through step: step
...
but the "Detaching" line has been redirected to
$outputs/gdb.base/foll-vfork/gdb.debug.
I looked at the documentation of "set logging debugredirect [on|off]":
...
By default, GDB debug output will go to both the terminal and the logfile.
Set debugredirect if you want debug output to go only to the log file.
...
and my interpretation of it was that "debug output" did not match the
"messages" description of inferior-events:
...
The set print inferior-events command allows you to enable or disable printing
of messages when GDB notices that new inferiors have started or that inferiors
have exited or have been detached.
...
Fix the discrepancy by not using gdb_stdlog for inferior-events.
Update the gdb.base/foll-vfork.exp test-case to not require
gdb_debug_enabled == 0.
Tested on x86_64-linux.
Tested test-case gdb.base/foll-vfork.exp with and without GDB_DEBUG=infrun.
ld/
* testsuite/ld-aarch64/dt_textrel.d: Pass explicit -z notext in
case ld was configured with --enable-textrel-check=error.
* testsuite/ld-aarch64/pr22764.d: Likewise.
* testsuite/ld-aarch64/pr20402.d: Likewise.
I would like to be able to use non-trivial types in gdbarch_tdep types.
This is not possible at the moment (in theory), because of the one
definition rule.
To allow it, rename all gdbarch_tdep types to <arch>_gdbarch_tdep, and
make them inherit from a gdbarch_tdep base class. The inheritance is
necessary to be able to pass pointers to all these <arch>_gdbarch_tdep
objects to gdbarch_alloc, which takes a pointer to gdbarch_tdep.
These objects are never deleted through a base class pointer, so I
didn't include a virtual destructor. In the future, if gdbarch objects
deletable, I could imagine that the gdbarch_tdep objects could become
owned by the gdbarch objects, and then it would become useful to have a
virtual destructor (so that the gdbarch object can delete the owned
gdbarch_tdep object). But that's not necessary right now.
It turns out that RISC-V already has a gdbarch_tdep that is
non-default-constructible, so that provides a good motivation for this
change.
Most changes are fairly straightforward, mostly needing to add some
casts all over the place. There is however the xtensa architecture,
doing its own little weird thing to define its gdbarch_tdep. I did my
best to adapt it, but I can't test those changes.
Change-Id: Ic001903f91ddd106bd6ca09a79dabe8df2d69f3b
Commit e86fc4a5bc ("PR 28447: implement multiple parameters for .file
on XCOFF") introduces C_FILE entries which can store additional
information.
However, some modifications are needed by them but not by the original
C_FILE entries, usually representing the filename.
This patch ensures that filename entries are kept as is, in order to
protect targets not supporting the additional entries.
* coffgen.c (coff_write_symbol): Protect filename entries
(coff_write_symbols): Likewise.
(coff_print_symbol): Likewise.
Gas uses the directory part, if present, of the .file 0 directive to set
entry 0 of the directory table in DWARF 5, which represents the "current
directory".
Now Gas also uses the file part of the same directive to set entry 0 of the
file table, which represents the "current compilation file". But the latter
need not be located in the former so GCC will use a full path in the file
part when it is passed a full path:
gcc -c /full/path/test.c -save-temps
yields:
.file 0 "/current/directory" "/full/path/test.c"
in the assembly file and:
The Directory Table (offset 0x22, lines 2, columns 1):
Entry Name
0 (indirect line string, offset: 0x25): /current/directory
1 (indirect line string, offset: 0x38): /full/path
The File Name Table (offset 0x30, lines 2, columns 2):
Entry Dir Name
0 0 (indirect line string, offset: 0x43): /full/path/test.c
in the object file. Note the full path and the questionable Dir value in
the 0 entry of the file table.
The point of this test is to just make sure the usage text is shown,
not the exact details of the usage text. So shorten the output test
to match the beginning. This fixes breakage when the output changed
slightly to include [--].
The new argv processing code assumed that we were always passed a
command line. If we weren't, make sure we don't crash before we
get a chance to output an error message about incorrect usage.
The #dest field used in the cris testsuite is a bit of hack to set the
argv[0] for the tests to read out later on. Now that the sim has an
option to set argv[0] explicitly, we don't need this custom field, so
let's drop it to harmonize the testsuites a little.
We default argv[0] to the program we run which is a standard *NIX
convention, but sometimes we want to be able to control the argv[0]
setting independently (especially for programs that inspect argv[0]
to change their behavior or output). Add an option to control it.
We use the program argv to both find the program to run (argv[0]) and
to hold the arguments to the program. Most of the time this is fine,
but if we want to let programs specify argv[0] independently (which is
possible in standard *NIX programs), this double duty doesn't work.
So let's split the path to the program to run out into a separate
field by itself. This simplifies the various sim_open funcs too.
By itself, this code is more of a logical cleanup than something that
is super useful. But it will open up customization of argv[0] in a
follow up commit. Split the changes to make it easier to review.
Set the mach to the right value all the time, and update xfail to
say the test fails on all targets. WIth multitarget testing, the
idea of target here doesn't make much sense.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
A couple of files changed on my latest --enable-maintainer-mode
build. ld/Makefile.in had a missing dependency but better sorting of
the loongson entries.
intl/
* configure: Regenerate.
ld/
* Makefile.am: Sort loongson entries.
* Makefile.in: Regenerate.
Compiling GDB with current GCC (1b4a63593b) runs into this:
src/gdb/location.c: In function 'int event_location_empty_p(const event_location*)':
src/gdb/location.c:963:38: error: the address of 'event_location::<unnamed union>::explicit_loc' will never be NULL [-Werror=address]
963 | return (EL_EXPLICIT (location) == NULL
| ^
src/gdb/location.c:57:30: note: 'event_location::<unnamed union>::explicit_loc' declared here
57 | struct explicit_location explicit_loc;
| ^~~~~~~~~~~~
GCC is right, EL_EXPLICIT is defined as returning the address of an
union field:
/* An explicit location. */
struct explicit_location explicit_loc;
#define EL_EXPLICIT(P) (&((P)->u.explicit_loc))
and thus must always be non-NULL.
Change-Id: Ie74fee7834495a93affcefce03c06e4d83ad8191
The 'show user' command (which shows the definition of non-python/scheme
user defined commands) is currently missing a completer. This is
mentioned in PR 16238. Having one can improve the user experience.
In this commit I propose an implementation for such completer as well as
the associated tests.
Tested on x86_64 GNU/Linux.
All feedbacks are welcome.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=16238
In <=gcc-7 versions, -fstrict-overflow is enabled by default, and that
triggers warnings in this code that relies on integer overflows to test
for carries. Change the logic to test against the limit directly.
The test stops at <signal_handler called> which is the call to the handler
rather than in the handler as intended. This patch replaces the
gdb_test "$enter_cmd to handler" with a gdb_test_multiple test. The multiple
test looks for the stop at <signal_handler called>. If found, the command
is issued again. The test passes if gdb stops in the handler as expected.
(gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler, step
from handler: continue to signal
stepi
<signal handler called>
1: x/i $pc
=> 0x7ffff7f80440 <__kernel_start_sigtramp_rt64>: bctrl
(gdb) stepi
handler (sig=551) at sigstep.c:32
32 {
1: x/i $pc
=> 0x10000097c <handler>: addis r2,r12,2
(gdb) PASS: gdb.base/sigstep.exp: stepi to handler, nothing in handler,
step from handler: stepi to handler
Patch has been tested on x86_64-linux and ppc64le-linux with no test failures.
On OBS I ran into:
...
(gdb) PASS: gdb.base/foll-vfork.exp: exit: \
vfork relations in info inferiors: continue to child exit
info inferiors^M
Num Description Connection Executable ^M
1 <null> foll-vfork-exit ^M
* 2 <null> foll-vfork-exit ^M
(gdb) I'm the proud parent of child #5044!^M
FAIL: gdb.base/foll-vfork.exp: exit: vfork relations in info inferiors: \
vfork relation no longer appears in info inferiors (timeout)
...
Fix this by removing the '$' anchor in the corresponding '$gdb_prompt $'
regexps.
Tested on x86_64-linux.
Extract allowed styles from libiberty, so we don't have to worry about
our help messages getting out of date. The function probably belongs
in libiberty/cplus-dem.c but it can be here for a while to iron out
bugs.
PR 28581
* demanguse.c: New file.
* demanguse.h: New file.
* nm.c (usage): Break up output. Use display_demangler_styles.
* objdump.c (usage): Use display_demangler_styles.
* readelf.c (usage): Likewise.
* Makefile.am: Add demanguse.c and demanguse.h.
* Makefile.in: Regenerate.
* po/POTFILESin: Regenerate.
GDB hangs when doing this:
- launch inferior with multiple threads
- multiple threads hit some breakpoint(s)
- one breakpoint hit is presented as a stop, the rest are saved as
pending wait statuses
- "set scheduler-locking on"
- resume the currently selected thread (because of scheduler-locking,
it's the only one resumed), let it execute until exit
- GDB hangs, not showing the prompt, impossible to interrupt with ^C
When the resumed thread exits, we expect the target to return a
TARGET_WAITKIND_NO_RESUMED event, and that's what we see:
[infrun] fetch_inferior_event: enter
[infrun] scoped_disable_commit_resumed: reason=handling event
[infrun] random_pending_event_thread: None found.
[Thread 0x7ffff7d9c700 (LWP 309357) exited]
[infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) =
[infrun] print_target_wait_results: -1.0.0 [process -1],
[infrun] print_target_wait_results: status->kind = no-resumed
[infrun] handle_inferior_event: status->kind = no-resumed
[infrun] handle_no_resumed: TARGET_WAITKIND_NO_RESUMED (ignoring: found resumed)
[infrun] prepare_to_wait: prepare_to_wait
[infrun] reset: reason=handling event
[infrun] maybe_set_commit_resumed_all_targets: not requesting commit-resumed for target native, no resumed threads
[infrun] fetch_inferior_event: exit
The problem is in handle_no_resumed: we check if some other thread is
actually resumed, to see if we should ignore that event (see comments in
that function for more info). If this condition is true:
(thread->executing () || thread->has_pending_waitstatus ())
... then we ignore the event. The problem is that there are some non-resumed
threads with a pending event, which makes us ignore the event. But these
threads are not resumed, so we end up waiting while nothing executes, hence
waiting for ever.
My first fix was to change the condition to:
(thread->executing ()
|| (thread->resumed () && thread->has_pending_waitstatus ()))
... but then it occured to me that we could simply check for:
(thread->resumed ())
Since "executing" implies "resumed", checking simply for "resumed"
covers threads that are resumed and executing, as well as threads that
are resumed with a pending status, which is what we want.
Change-Id: Ie796290f8ae7f34c026ca3a8fcef7397414f4780
When building with clang 13 (and -std=gnu++17 to work around an issue in
string_view-selftests.c), we run into a few Wimplicit-exception-spec-mismatch
warnings:
...
src/gdbsupport/new-op.cc:102:1: error: function previously declared with an \
explicit exception specification redeclared with an implicit exception \
specification [-Werror,-Wimplicit-exception-spec-mismatch]
operator delete (void *p)
^
/usr/include/c++/11/new:130:6: note: previous declaration is here
void operator delete(void*) _GLIBCXX_USE_NOEXCEPT
^
...
These are due to recent commit 5fff6115fe "Fix
LD_PRELOAD=/usr/lib64/libasan.so.6 gdb".
Fix this by adding the missing noexcept.
Build on x86_64-linux, using gcc 7.5.0 and clang 13.0.0.
When building with -std=c++11, we run into two Werror=missing-declarations:
...
new-op.cc: In function 'void operator delete(void*, std::size_t)':
new-op.cc:114:1: error: no previous declaration for \
'void operator delete(void*, std::size_t)' [-Werror=missing-declarations]
operator delete (void *p, std::size_t) noexcept
^~~~~~~~
new-op.cc: In function 'void operator delete [](void*, std::size_t)':
new-op.cc:132:1: error: no previous declaration for \
'void operator delete [](void*, std::size_t)' [-Werror=missing-declarations]
operator delete[] (void *p, std::size_t) noexcept
^~~~~~~~
...
These are due to recent commit 5fff6115fe "Fix
LD_PRELOAD=/usr/lib64/libasan.so.6 gdb".
The declarations are provided by <new> (which is included) for c++14 onwards,
but they are missing for c++11.
Fix this by adding the missing declarations.
Tested on x86_64-linux, with gcc 7.5.0, both without (implying -std=gnu++14) and
with -std=c++11.
Add a regression test-case for commit a50bdb99af "[gdb/tdep, rs6000] Don't
skip system call in skip_prologue":
- set a breakpoint on a local copy of glibc's _exit, and
- verify that it triggers.
The test-case uses an assembly file by default, but also has the possibility
to use a C source file instead.
Tested on ppc64le-linux. Verified that the test-case fails without
aforementioned commit, and passes with the commit. Both with assembly
and C source.
