PR 22967
* nm.c (ifunc_type_chars): New variable.
(long_options): Add --ifunc-chars.
(print_symbol): Use ifunc_type_chars for ifunc symbols.
(main): Handle the new option.
* doc/binutils.texi: Document the new option.
* configure.ac: Add --enable-f-for-ifunc-symbols option which
changes the default symbol displayed by nm.
* NEWS: Mention the new feature.
* testsuite/binutils-all/nm.exp: Test the new feature.
* config.in: Regenerate.
* configure: Regenerate.
binutils/ChangeLog:
* testsuite/binutils-all/readelf-maskos-1a.d: Fix test for unrecognized
bit set in SHF_MASKOS range.
* testsuite/binutils-all/readelf-maskos-1b.d: Likewise.
* testsuite/binutils-all/readelf-maskos-unknown.s: New test.
ld/ChangeLog:
* testsuite/ld-elf/retain3.s: Move symbolic reference into writeable
.data section from read-only .text section.
* testsuite/ld-elf/retain5.d: Don't pass --print-gc-sections for test
that doesn't require it.
* testsuite/ld-elf/retain6a.d: Adjust test.
* testsuite/ld-elf/retain6main.s: Move symbolic reference into writeable
.data section from read-only .text section.
The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI.
It is defined as follows:
=========================================================
Section Attribute Flags
+-------------------------------------+
| Name | Value |
+-------------------------------------+
| SHF_GNU_RETAIN | 0x200000 (1 << 21) |
+-------------------------------------+
SHF_GNU_RETAIN
The link editor should not garbage collect the section.
=========================================================
The .section directive accepts the "R" flag, which indicates
SHF_GNU_RETAIN should be applied to the section.
There is not a direct mapping of SHF_GNU_RETAIN to the BFD
section flag SEC_KEEP. Keeping these flags distinct allows
SHF_GNU_RETAIN sections to be explicitly removed by placing them in
/DISCARD/.
bfd/ChangeLog:
* elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain.
(struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits.
* elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain
for SHF_GNU_RETAIN.
(_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is
not supported by the OSABI.
Adjust error messages.
* elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from
input BFD to output BFD.
(bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set.
binutils/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN.
Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs.
* testsuite/binutils-all/readelf.exp: Run new tests.
Don't run run_dump_test when there isn't an assembler available.
* testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust
comment.
* testsuite/binutils-all/readelf-maskos-1a.d: New test.
* testsuite/binutils-all/readelf-maskos-1b.d: New test.
* testsuite/binutils-all/readelf-maskos.s: New test.
* testsuite/binutils-all/retain1.s: New test.
* testsuite/binutils-all/retain1a.d: New test.
* testsuite/binutils-all/retain1b.d: New test.
gas/ChangeLog:
* NEWS: Announce SHF_GNU_RETAIN support.
* config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit
between section declarations.
(obj_elf_parse_section_letters): Handle 'R' flag.
Handle numeric flag values within the SHF_MASKOS range.
(obj_elf_section): Validate SHF_GNU_RETAIN usage.
* doc/as.texi: Document 'R' flag to .section directive.
* testsuite/gas/elf/elf.exp: Run new tests.
* testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section22.d: New test.
* testsuite/gas/elf/section22.s: New test.
* testsuite/gas/elf/section23.s: New test.
* testsuite/gas/elf/section23a.d: New test.
* testsuite/gas/elf/section23b.d: New test.
* testsuite/gas/elf/section23b.err: New test.
* testsuite/gas/elf/section24.l: New test.
* testsuite/gas/elf/section24.s: New test.
* testsuite/gas/elf/section24a.d: New test.
* testsuite/gas/elf/section24b.d: New test.
include/ChangeLog:
* elf/common.h (SHF_GNU_RETAIN): Define.
ld/ChangeLog:
* NEWS: Announce support for SHF_GNU_RETAIN.
* ld.texi (garbage collection): Document SHF_GNU_RETAIN.
(Output Section Discarding): Likewise.
* testsuite/ld-elf/elf.exp: Run new tests.
* testsuite/ld-elf/retain1.s: New test.
* testsuite/ld-elf/retain1a.d: New test.
* testsuite/ld-elf/retain1b.d: New test.
* testsuite/ld-elf/retain2.d: New test.
* testsuite/ld-elf/retain2.ld: New test.
* testsuite/ld-elf/retain2.map: New test.
* testsuite/ld-elf/retain3.d: New test.
* testsuite/ld-elf/retain3.s: New test.
* testsuite/ld-elf/retain4.d: New test.
* testsuite/ld-elf/retain4.s: New test.
* testsuite/ld-elf/retain5.d: New test.
* testsuite/ld-elf/retain5.map: New test.
* testsuite/ld-elf/retain5lib.s: New test.
* testsuite/ld-elf/retain5main.s: New test.
* testsuite/ld-elf/retain6a.d: New test.
* testsuite/ld-elf/retain6b.d: New test.
* testsuite/ld-elf/retain6lib.s: New test.
* testsuite/ld-elf/retain6main.s: New test.
PR 26829
* dwarf.c (struct dwo_info): Add cu_offset field.
(add_dwo_info): Add cu_offset parameter. Record in new dwo_info
struct.
(add_dwo_name): Add cu_offset field.
(add_dwo_dir): Add cu_offset field.
(add_dwo_id): Add cu_offset field.
(read_and_display_attr_value): Pass cu_offset to dwo recording
functions.
(load_separate_debug_files): Accumulate name, dir and id values
and display once for each CU.
* testsuite/binutils-all/dwo.sL Use a separate CU for the second
dwo link.
* testsuite/binutils-all/readelf.k2: Update expected output.
* ar.c (long_options): Add --record-libdeps.
(usage): Mention the new option.
(decode_options): Handle the new option.
(replace_members): If necessary, create a bfd to hold the libdeps
description.
* binemul.c (ar_emul_append_bfd): New function.
(ar_emul_replace_bfd): New function.
(ar_emul_default_append): Replace file_name and target arguments
with new_bfd argument.
(ar_emul_default_replace): Likewise.
* binemul.h: Update prototypes.
(struct bin_emulation_xfer_struct): Update fields.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* emul_aix.c (ar_emul_aix_append): Update.
(ar_emul_aix_replace): Likewise.
* testsuite/binutils-all/ar.exp: Add test of new feature.
A .debug_abbrev section can have multiple CUs. When caching abbrev list,
we need to check abbrev base to support multiple CUs.
PR binutils/26808
* dwarf.c (abbrev_list): Add abbrev_base.
(new_abbrev_list): Add an abbrev_base argument and record it.
(find_abbrev_list_by_abbrev_offset): Add an abbrev_base argument
and match it.
(process_debug_info): Pass abbrev_base to new_abbrev_list and
find_abbrev_list_by_abbrev_offset.
(display_debug_abbrev): Pass 0 abbrev_base to new_abbrev_list
and find_abbrev_list_by_abbrev_offset.
* testsuite/binutils-all/x86-64/pr26808.dump: New file.
* testsuite/binutils-all/x86-64/pr26808.dwp.bz2: Likewise.
* testsuite/binutils-all/x86-64/x86-64.exp: Run PR binutils/26808
test.
Pass --disable-reloc-section on PE targets for PR 25662 test since
commit 514b4e191d
Author: Jeremy Drake <sourceware-bugzilla@jdrake.com>
Date: Thu Aug 27 12:58:27 2020 +0100
Change the default characteristics of DLLs built by the linker to more secure settings.
defaulted to --enable-reloc-section.
PR ld/26587
* testsuite/binutils-all/objcopy.exp: Pass --disable-reloc-section
to ld on PE targets for PR 25662 test.
PR 26356
* som.c (som_bfd_copy_private_section_data): Issue error when a
subspace is specified without its containing space.
* testsuite/binutils-all/objcopy.exp (objcopy --reverse-bytes): Add
"-j $PRIVATE$" to command on hppa*-*-hpux*.
* testsuite/lib/utils-lib.exp (default_binutils_run): Remove existing
dollar-sign quotes before quoting. Do this prior to generating log
output.
readelf_wi_test checks the DW_AT_LANGUAGE is recognized by matching
against ANSI C. But for the new DWARF5 DW_LANG_C11 readelf simply
prints "C11", not prefixed with ANSI (DW_LANG_C is "non-ANSI C",
DW_LANG_C89 is "ANSI C" and DW_LANG_C99 is "ANSI-C99"). Adjust the
testcase instead of readelf because C11 seems a fine name.
binutils/ChangeLog:
* testsuite/binutils-all/readelf.exp (readelf_wi_test): Also
recognize DW_LANG_C11.
PR binutils/26331
* readelf.c (do_demangle): New option flag.
(print_symbol): If do_demangle is enabled, demangle the symbol.
(enum long_option_values): New enum to hold long option values.
(options): Add demangle, no-demangle, recursion-limit and
no-recursion-limit options. Alpha sort the table.
(usage): Describe the new options.
(parse_args): Handle the new options.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/readelf.exp: Test the new feature.
* testsuite/binutils-all/mangled.s: New file - assembler source.
* testsuite/binutils-all/readelf.demangled: New file - expected
output from readelf.
Make the MIPS/IRIX naming of local section symbols consistent between
files produced by generic ELF code and ELF linker code, complementing
commit 174fd7f955 ("New bfd elf hook: force naming of local section
symbols"), <https://sourceware.org/ml/binutils/2004-02/msg00072.html>.
Local section symbols have no names in the standard ELF gABI, however
the lack of a name causes problems with IRIX's MIPSpro linker. To work
around the issue we give them names, however we do that in generic ELF
code only, based on what the `elf_backend_name_local_section_symbols'
hook returns if present. That makes objects created by GAS or `objdump'
work correctly, however not ones created by `ld -r'. That would not
normally cause issues with IRIX systems using GAS and `objdump' only
with the MIPSpro linker, however if GNU LD was used for whatever reason
in producing objects later fed to IRIX's MIPSpro linker, then things
would break.
Modify ELF linker code accordingly then, using the same hook. Adjust
the `ld-elf/64ksec-r' test accordingly so that it also accepts a section
symbol with a name.
Also modify the hook itself so that only actual ET_REL objects have
names assigned to local section symbols. Other kinds of ELF files are
not ever supposed to be relocated with the MIPSpro linker, so we can
afford producing more standard output.
Add suitable GAS, LD and `objcopy' test cases to the relevant testsuites
to keep these tools consistently verified. This change also fixes:
FAIL: objcopy executable (pr25662)
across MIPS targets using the IRIX compatibility mode.
bfd/
* elflink.c (bfd_elf_final_link): Give local symbols a name if
so requested.
* elfxx-mips.c (_bfd_mips_elf_name_local_section_symbols): Only
return TRUE if making ET_REL output.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-sort-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-o32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n32t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-sort-n64t.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-o32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n32.d:
New test.
* testsuite/binutils-all/mips/global-local-symtab-final-n64.d:
New test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-sort-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64.d: New test.
* testsuite/gas/mips/global-local-symtab-sort-n64t.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-elf/sec64k.exp: Also accept a section symbol with
a name.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n32t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-o32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n32.d: New
test.
* testsuite/ld-mips-elf/global-local-symtab-final-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Correct ELF linker code so as to set the `sh_info' value of the static
symbol table section according to the section symbols vs other symbols
split where required by the selection of the IRIX compatibility mode for
MIPS target. Add a `elf_backend_elfsym_local_is_section' hook for that
purpose, returning TRUE if it is only STB_LOCAL/STT_SECTION symbols that
are to be considered local for the purpose of this split rather than all
STB_LOCAL symbols.
We do it already in generic ELF code, and have done it since 1993, with
the `elf_backend_sym_is_global' hook, affecting GAS and `objcopy', so
these tools produce correct ELF output in the IRIX compatibility mode,
however if such output is fed as input to `ld -r', then the linker's
output is no longer valid for that mode. The relevant changes to
generic ELF code are:
commit 062189c6ea
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Nov 18 17:12:47 1993 +0000
and:
commit 6e07e54f1b
Author: Ian Lance Taylor <ian@airs.com>
Date: Thu Jan 6 20:01:42 1994 +0000
(split across two GIT commits likely due to repository conversion
peculiarities).
The `elf_backend_sym_is_global' hook however operates on BFD rather than
ELF symbols, making it unsuitable for the ELF linker as the linker does
not convert any symbol tables processed into the BFD format. Converting
the hook to operate on ELF symbols would in principle be possible, but
it would still require a considerable rewrite of `bfd_elf_final_link' to
adapt to the interface.
Therefore, especially given that no new use for the IRIX compatibility
mode is expected, minimize changes made to the ELF linker code and just
add an entirely new hook, and wire it in the o32 and n32 MIPS backends
accordingly; the n64 backend never uses the IRIX compatibility mode.
Since we have no coverage here at all add suitable GAS, LD and `objcopy'
test cases to the relevant testsuites to keep these tools consistently
verified.
bfd/
* elf-bfd.h (elf_backend_data): Add
`elf_backend_elfsym_local_is_section' member.
* elfxx-target.h (elf_backend_elfsym_local_is_section): New
macro.
(elfNN_bed): Add `elf_backend_elfsym_local_is_section' member.
* elflink.c (bfd_elf_final_link): Use it to determine whether
set the `.symtab' section's `sh_info' value to the index of the
first non-local or non-section symbol.
* elf32-mips.c (mips_elf32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
* elfn32-mips.c (mips_elf_n32_elfsym_local_is_section): New
function.
(elf_backend_elfsym_local_is_section): New macro.
binutils/
* testsuite/binutils-all/mips/global-local-symtab-o32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-o32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n32t.d: New
test.
* testsuite/binutils-all/mips/global-local-symtab-n64.d: New
test.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* testsuite/gas/mips/global-local-symtab-o32.d: New test.
* testsuite/gas/mips/global-local-symtab-o32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n32.d: New test.
* testsuite/gas/mips/global-local-symtab-n32t.d: New test.
* testsuite/gas/mips/global-local-symtab-n64.d: New test.
* testsuite/gas/mips/global-local-symtab.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/global-local-symtab-o32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-o32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n32t.d: New test.
* testsuite/ld-mips-elf/global-local-symtab-n64.d: New test.
* testsuite/ld-mips-elf/global-local-symtab.ld: New test linker
script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
The binutils testsuite supports involving LD in processing test cases
and with the MIPS target that has the same issues the LD testsuite does.
So to support LD in the MIPS part of the binutils testsuite similarly
to commit 86b24e15c4 ("MIPS/LD/testsuite: Correct comm-data.exp test
ABI/emul/endian arrangement") update the mips.exp test script to:
- correctly select emulations for targets using non-traditional MIPS
emulations,
- correctly select ABIs for targets that do not support all of them,
- use the default endianness selection where possible to benefit targets
that support only one,
- simplify test invocation by providing ABI-specific `run_dump_test'
wrappers, specifically `run_dump_test_o32', `run_dump_test_n32' and
`run_dump_test_n64', which remove the need to use conditionals across
the Expect script or to repeat ABI-specific GAS and LD flags with each
invocation,
borrowing changes from commit 78da84f994 ("MIPS/LD/testsuite: Correct
mips-elf.exp test ABI/emul/endian arrangement").
As a side effect this disables o32 ABI testing for targets that are not
supposed to support them and do not with LD, but still have such support
with BFD and GAS due to our inflexibility in configuration. Ultimately
we ought to support having o32 completely disabled.
binutils/
* testsuite/binutils-all/mips/mips.exp (run_dump_test_abi)
(run_dump_test_o32, run_dump_test_n32, run_dump_test_n64): New
procedures.
(has_newabi): Remove variable.
(has_abi, abi_asflags, abi_ldflags): New associative array
variables.
(irixemul): New variable.
Replace `run_dump_test' calls where applicable throughout with
`run_dump_test_o32', `run_dump_test_n32' and `run_dump_test_n64'
as appropriate. Use `noarch' for tests that require their own
architecture setting.
* testsuite/binutils-all/mips/mips-ase-1.d: Remove GAS flags.
* testsuite/binutils-all/mips/mips-ase-2.d: Likewise.
* testsuite/binutils-all/mips/mips-ase-3.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: Likewise.
* testsuite/binutils-all/mips/mips-note-2r.d: Likewise.
* testsuite/binutils-all/mips/mips-reginfo-n32.d: Likewise.
* testsuite/binutils-all/mips/mips-reginfo.d: Likewise.
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Likewise.
* testsuite/binutils-all/mips/mips16-pcrel.d: Likewise.
* testsuite/binutils-all/mips/mips16-alias.d: Remove `-32' from
GAS flags.
* testsuite/binutils-all/mips/mips16-extend-insn.d: Likewise.
* testsuite/binutils-all/mips/mips16-noalias.d: Likewise.
* testsuite/binutils-all/mips/mips16-undecoded.d: Likewise.
* testsuite/binutils-all/mips/mips16e2-extend-insn.d: Likewise.
* testsuite/binutils-all/mips/mips16e2-undecoded.d: Likewise.
* testsuite/binutils-all/mips/mixed-micromips.d: Likewise.
* testsuite/binutils-all/mips/mixed-mips16.d: Likewise.
ARC can use odd-even double register pairs in some selected
instructions. Although the GNU assembler doesn't allow even-odd
registers to be used, there may be cases when the disassembler is
presented with such situation. This patch add a test and detects such
cases.
opcodes/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* arc-dis.c (print_insn_arc): Detect and emit a warning when a
faulty double register pair is detected.
binutils/
2020-07-14 Claudiu Zissulescu <claziss@gmail.com>
* testsuite/binutils-all/arc/double_regs.s: New test.
* testsuite/binutils-all/arc/objdump.exp: Add the above test.
Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
and restrict some other tests using is_*_format.
* testsuite/binutils-all/ar.exp: Use is_xcoff_format.
* testsuite/binutils-all/nm.exp: Likewise.
* testsuite/binutils-all/copy-2.d: Run only for elf and pe targets.
* testsuite/binutils-all/copy-3.d: Run only for elf targets.
* testsuite/binutils-all/set-section-alignment.d: Likewise.
* testsuite/binutils-all/copy-4.d: Don't run for xcoff.
Avoid an UNRESOLVED test due to "Error: the XCOFF file format does not
support arbitrary sections".
* testsuite/lib/binutils-common.exp (is_xcoff_format): New.
* testsuite/binutils-all/objcopy.exp (pr25662): Exclude xcoff.
* binutils/testsuite/binutils-all/pr25662-pdp11.s: Alternate source file
for test using section pseudo-ops compatible with pdp11.
* binutils/testsuite/binutils-all/objcopy.exp: Select alternate source.
There are a number of targets that don't support thin archives (*),
and vms doesn't even support file name extensions other than .obj for
archives containing object files. This patch adjusts the testsuite
to cater for the vms restriction, and reenables testing for non-ELF
alpha targets. That adds a few alpha-dec-vms fails and one
alpha-linuxecoff fail but testsuite fails on those targets are nothing
new.
(*) It might seem like they do if binutils is built with
--enable-plugins but the plugin archive support is broken, causing the
wrong type of archives to be created by ar for those targets.
* testsuite/binutils-all/ar.exp (obj): Set up object file name
extension. Use throughout. Don't completely exclude non-ELF
alpha targets. Run long_filenames test for tic30. Exclude thin
archive tests for aix, ecoff and vms.
* estsuite/binutils-all/objdump.exp (obj): Set up object file name
extension. Use throughout. Don't exclude non-ELF alpha targets
from "bintest.a".
* readelf.c (warn): New function - like elfcomm.c version but only
produces output if warnings are enabled.
(struct options): Add --lint and --enable-checks.
(usage): Add entry for --lint.
(parse_args): Handle -L. If checks are enabled but no dumps have
been selected then enable all dumps.
(process_section_headers): Replace long if-then-else sequence with
a switch. Add warning messages for empty SHT_REL, SHT_RELA and
SHT_PROGBITS sections.
(process_file): Do not complain if the file is an archive and lint
mode has been enabled.
* elfcomm.c (error): Make the function weak.
(warn): Likewise.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* dwarf.h (report_leb_status): Add file name and line number
parameters. Include them in the diagnostic output.
(READ_ULEB): Pass file and line number to report_leb_status.
(READ_SLEB): Likewise.
* dwarf.c (read_and_print_leb128): Pass file and line number to
report_leb_status.
* testsuite/binutils-all/readelf.exp: Add test of new feature.
* testsuite/binutils-all/zero-sec.s: New test source file.
* testsuite/binutils-all/zero-sec.r: Expected output from new
test.
VDUP (neon) instructions can be conditional, but this is not taken into
account in the current master. This commit fixes that by i) fixing the
VDUP instruction masks and ii) adding logic for disassembling
conditional neon instructions.
opcodes * arm-dis.c (neon_opcodes): Fix VDUP instruction masks.
(print_insn_neon): Support disassembly of conditional
instructions.
binutils* testsuite/binutils-all/arm/vdup-cond.d: New test for testing that
conditional VDUP instructions are disassembled correctly.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-cond.d.
* testsuite/binutils-all/arm/vdup-thumb.d: New test for testing
that VDUP instructions (which are conditional in A32) can be
disassembled in thumb mode.
* testsuite/binutils-all/arm/vdup-cond.s: New file used by
vdup-thumb.d.
PR binutils/pr25662
bfd * libcoff-in.h (struct pe_tdata): Rename the insert_timestamp
field to timestamp and make it an integer.
* libcoff.h: Regenerate.
* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Test the timestamp
field in the pe_data structure rather than the insert_timestamp
field.
binutils* objcopy.c (copy_object): When copying PE format files set the
timestamp field in the pe_data structure if the preserve_dates
flag is set.
* testsuite/binutils-all/objcopy.exp (objcopy_test) Use
--preserve-dates in place of the -p option, in order to make its
effect more obvious.
ld * emultempl/pe.em (after_open): Replace initialisation of the
insert_timestamp field in the pe_data structure with an
initialisation of the timestamp field.
* emultemp/pep.em: Likewise.
* pe-dll.c (fill_edata): Use the timestamp field in the pe_data
structure instead of the insert_timestamp field.
Last patch didn't manage to xfail spu due to clear_xfail *-*-*elf*.
Clearing *-*-*elf* dates back to a time when we had rather a lot more
setup_xfail patterns, so limiting it to hppa*-*-*elf*. Also,
mips-*-irix ought to have been mips-*-irix* and I'm having second
thoughts about xfailing mips and hiding what looks like a problem: If
the mips target is supposed to emit names for local section symbols
and does so for objcopy, why isn't it doing the same for ld? Also,
lots more mips targets would be subject to this test failing. So I'm
backing out those xfails and leaving it to someone more knowledgeable
about mips.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Only
clear_xfail hppa*-*-*elf*. Revert mips xfails.
xfails spu due to a note section getting a different vma, and some
mips targets that give section symbols a name string. I added -p
for the executable test in an attempt to fix all the pe target fails,
but that doesn't preserve the date/time for some reason.
* testsuite/binutils-all/objcopy.exp (objcopy_test): Move xfails
from here to calls. Remove "m8*-*-*" entry. Don't xfail tic54x
but do xfail spu, mipstx39 and mips-sgi-irix for the executable
test. Pass "-p" to objcopy for the executable test.
binutils/ChangeLog:
2020-03-27 Jozef Lawrynowicz <jozef.l@mittosystems.com>
PR binutils/25662
* testsuite/binutils-all/objcopy.exp (objcopy_test): Add argument to
specify whether an object file or executable should be built and tested.
Change test names to report whether an object file or executable is
being tested.
* testsuite/binutils-all/pr25662.ld: New test.
* testsuite/binutils-all/pr25662.s: New test.
PR 25676
bfd * dwarf2.c (struct varinfo): Add unit_offset field to record the
location of the varinfo in the unit's debug info data. Change the
type of the stack field to a boolean.
(lookup_var_by_offset): New function. Returns the varinfo
structure for the variable described at the given offset in the
unit's debug info.
(scan_unit_for_symbols): Add support for variables which have the
DW_AT_specification attribute.
binutils* testsuite/binutils-all/dw4.s: New test source file.
* testsuite/binutils-all/nm.exp: Run the new test.
PR 25611
PR 25614
* dwarf.h (DWARF2_Internal_LineInfo): Add li_address_size and
li_segment_size fields.
* dwarf.c (read_debug_line_header): Record the address size and
segment selector size values (if present) in the lineinfo
structure.
(display_formatted_table): Warn if the format count is empty but
the table itself is not empty.
Display the format count and entry count at the start of the table
dump.
(display_debug_lines_raw): Display the address size and segement
selector size fields, if present.
* testsuite/binutils-all/dw5.W: Update expected output.
gas * dwarf2dbg.c (DWARF2_FILE_TIME_NAME): Default to -1.
(DWARF2_FILE_SIZE_NAME): Default to -1.
(DWARF2_LINE_VERSION): Default to the current dwarf level or 3,
whichever is higher.
(DWARF2_LINE_MAX_OPS_PER_INSN): Provide a default value of 1.
(NUM_MD5_BYTES): Define.
(struct file entry): Add md5 field.
(get_filenum): Delete and replace with...
(get_basename): New function.
(get_directory_table_entry): New function.
(allocate_filenum): New function.
(allocate_filename_to_slot): New function.
(dwarf2_where): Use new functions.
(dwarf2_directive_filename): Add support for extended .file
pseudo-op.
(dwarf2_directive_loc): Allow the use of file number zero with
DWARF 5 or higher.
(out_file_list): Rename to...
(out_dir_and_file_list): Add DWARF 5 support.
(out_debug_line): Emit extra values into the section header for
DWARF 5.
(out_debug_str): Allow for file 0 to be used with DWARF 5.
* doc/as.texi (.file): Update the description of this pseudo-op.
* testsuite/gas/elf-dwarf-5-file0.s: Add more lines.
* testsuite/gas/elf-dwarf-5-file0.d: Update expected dump output.
* testsuite/gas/lns/lns-diag-1.l: Update expected error message.
* NEWS: Mention the new feature.
PR 25543
* readelf.c (dump_section_as_strings): Display new-line characters
as \n and then insert a line break.
* testsuite/binutils-all/pr25543.s: New test.
* testsuite/binutils-all/pr25543.d: Test driver.
* testsuite/binutils-all/readelf.exp: Run the new test.
Start server before setting environment variable.
Specify tmpdir as the location of the server's
database.
Check additional server metrics at start-up.
