* cgen-scache.c (scache_option_handler): Prevent possible
undefined behaviour computing the size of the scache by using
unsigned integers instead of signed integers.
This fixes PR sim/19441. In the MIPS simulator the microMIPS
functions in micromips.igen were not predicated on the microMIPS
models. This was causing build issues for some target triples.
This patch sets all the microMIPS specific functions to only be built if
the micromips32, micromips64 or micromipsdsp models are used.
PR sim/19441
* micromips.igen (delayslot_micromips): Enable for `micromips32',
`micromips64' and `micromipsdsp' only.
(process_isa_mode): Enable for `micromips32' and `micromips64' only.
(do_micromips_jalr, do_micromips_jal): Likewise.
(compute_movep_src_reg): Likewise.
(compute_andi16_imm): Likewise.
(convert_fmt_micromips): Likewise.
(convert_fmt_micromips_cvt_d): Likewise.
(convert_fmt_micromips_cvt_s): Likewise.
(FMT_MICROMIPS): Likewise.
(FMT_MICROMIPS_CVT_D): Likewise.
(FMT_MICROMIPS_CVT_S): Likewise.
This patch makes a fair number of fixes in the various comments of
sim-fpu.c, mostly to either better conform to the GNU Coding Standards
(sentences start with a capital letter, end with a period), or to
fix spelling mistakes.
sim/common/ChangeLog:
* sim-fpu.c: Minor comment fixes throughout.
This patch just makes a copy of formatting changes to better conform
with the GNU Coding Style.
sim/common/ChangeLog:
* sim-fpu.c (print_bits): Minor reformatting (no code change).
(sim_fpu_map): Likewise.
The mips bfd will sign extend 32-bit addresses into 64-bit values,
so if the entry happens to be 0x80000000 or higher, it is turned to
0xffffffff80000000 which points to memory that doesn't exist.
This wasn't an issue until commit 26f8bf63bf
as all addresses were automatically truncated there in the translate
function to 32-bits. When we cleaned up that code, the full 64-bits
were checked leading to many test failures for mips-sde-elf targets
and such.
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader. This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.
We'll want to move the other options out too, but it'll take more work.
This was imported from the ppc sim, but that was only used to control
a single file, and that is already governed by the hw models. There's
no need to have a sep configure option here, especially since none of
the other sims are using it. Even when the code is enabled, there's
no runtime overhead.
Currently ports have to call SIM_AC_OPTION_ENVIRONMENT explicitly in
order to make the configure flag available. There's no real reason
to not allow this flag for all ports, so move it to the common sim
macro. This way we get standard behavior across all ports too.
Currently ports have to call SIM_AC_OPTION_ASSERT explicitly in order
to make the configure flag available, which none of them do. There's
no real reason to not allow this flag for all ports, so move it to the
common sim macro. This way we get standard behavior across all ports.
We don't have alternative nltvals.def files, so always symlinking
the targ-vals.def file to it doesn't gain us anything. It does
make the build more complicated though and a pain to convert to
something newer (like automake). Drop the symlinking entirely.
In the future, we'll want to explode this file anyways into the
respective arch dirs so things can be selected dynamically at
runtime, so it's not like we'll be bringing this back.
No other port calls this macro directly, and mips has it hardcoded
to the default -- disabling smp. In the future we'll enable this
for all targets in common code, so tidy up the mips code now.
Currently ports have to call SIM_AC_OPTION_INLINE explicitly in order
to make the configure flag available. There's no real reason to not
allow this flag for all ports, so move it to the common sim macro.
This way we get standard behavior across all ports too.
These options were never exposed for most sims (just the ppc one),
and they are really only useful on 32-bit x86 systems. Considering
modern systems tend to be 64-bit x86_64 and how well modern compilers
are at optimizing code, these have outlived their usefulness.
No other sub directory provides such a configuration option, so
drop it from the sim dir as well. This cleans up a good bit of
code in the process.
If people want to use custom flags for just the sim, they can
still run configure+make by hand in the sim subdir and use the
normal CFLAGS settings.
Now that cconfig.h doesn't exist, there's no need to build in the common
subdir anymore. We leave the configure/Makefile files in there as there
is a helper for developers to generate the nltvals.def file. Once that
gets cleaned up in the future though, we can drop the build logic too.
The common subdir sets up a cconfig.h file to hold checks for the common
code. In practice, most files still end up using config.h instead which
just leads to confusion.
Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON
so we can drop the cconfig.h file altogether. Now there is only a single
config.h file like normal.
Some targets have started to add support for calling the disassembler
automatically when executing code. Add support for that directly into
the trace core.
The cris sim hit a few failures after the recent getopt logic, and the
expected output showed a few ways we can improve things to better match
other utils.
The compiler/C library should produce reasonable code for htonl/ntohl,
and at least glibc tries pretty hard to always produce good code for
them. This logic only had support for 32-bit x86 systems anymore, and
it's unlikely people were even opting into this, so drop it all.
The compiler should produce reasonable code here in general, so punt the
various arch checks and bswap defines. This code will eventually go away
entirely when we convert it to the common memory code.
Fix a long standing todo where we let getopt write directly to stderr
when an invalid option is passed. Use the sim io funcs instead as they
go through the filtered callbacks that gdb wants.
Clean up some more remains of WITH_DEVICES that escaped notice.
We also clean up GETTWI/SETTWI defines in a few ports where they
were copied & pasted and are unused as they happen to be near the
device code.
The --enable-sim-hostendian flag was purely so people had an escape route
for when cross-compiling. This is because historically, AC_C_BIGENDIAN
did not work in those cases. That was fixed a while ago though, so we can
require that macro everywhere now and simplify a good bit of code.
Rather than re-invent endian defines, as well as maintain our own list
of OS & arch-specific includes, punt all that logic in favor of the bfd
ones already set up and maintained elsewhere. We already rely on the
bfd library, so leveraging the endian aspect should be fine.
The iq2000/m32r/sh64 option parsing logic appears to have always been
dead. At least iq2000/sh64 are simply copy & paste rot from m32r.
The lm32 option parsing hack here hasn't been needed for a while -- this
was fixed back in commit 11409fac6b in the
common code.
The global current_state handle to the current simulator state is a
design idea that was half implemented, but never really cleaned up.
The point was to have a global variable pointing to the state so that
funcs could more quickly & easily access the state anywhere. We've
instead moved in the direction of passing state around everywhere and
don't have any intention of moving back.
I also can't find any references to gdb using this variable, or to
cgen related "dump_regs" functions, both of which were used in the
comments related to this code.
When connecting to the simulator in gdb, we don't want it to exit on
us when we pass down unknown/invalid/help/etc... options. Plumb down
the kind argument so we can handle both gdb & psim interfaces.
