PR gas/20247
* as.h (do_not_pad_sections_to_alignment): New global variable.
* as.c (show_usage): Add --no-pad-sections.
(parse_args): Likewise.
* write.c (size_seg): Skip padding the end of the section if
requested from the command line.
(SUB_SEGMENT_ALIGN): Likewise.
* doc/as.texinfo: Document the new option.
* NEWS: Mention the new feature.
* testsuite/gas/elf/section11.s: New test.
* testsuite/gas/elf/section11.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
One of the tic54x testcases looks for a section alignment of 1. After
9136aa49 the alignment became 0. While it happens that an alignment
of 0 is treated as an alignment of 1, there is no reason to not apply
the explicit alignment.
* write.c (record_alignment): Revert 2016-02-18 change.
There is no need to set BFD compression bits for each section. We
should just set it once in write_object_file.
* write.c (compress_debug): Move BFD compression bits setting
to ...
(write_object_file): Here.
gas * read.c (finish_bundle): Avoid recording a negative alignment.
(do_align): Use unsigned values for n, len and max. Only create
a frag if the alignment requirement is greater than the minimum
byte alignment. Avoid recording a negative alignment.
(s_align): Use unsigned values where appropriate.
(bss_alloc): Use an unsigned value for the alignment.
(sizeof_sleb128): Add a comment noting that we encode one octet
per byte, regardless of the value of OCTETS_PER_BYTE_POWER.
(emit_leb129_expr): Abort if the emitted encoding was longer than
expected.
* read.h (output_leb128): Update prototype.
(sizeof_leb128): Update prototype.
(bss_alloc): Update prototype.
* write.c (record_alignment): Use an unsigned value for the
alignment. Do not record alignments less than the minimum
alignment for a byte.
* write.h (record_alignment): Update prototype.
PR gas/18500
gas * config/tc-arm.c (is_double_a_single): New function.
(double_to_single): New function.
(move_or_literal_pool): Add support for converting VLDR to VMOV.
tests * gas/arm/vfpv2-ldr_immediate.s: New test case.
* gas/arm/vfpv2-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3-ldr_immediate.s: New test case.
* gas/arm/vfpv3-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3xd-ldr_immediate.s: New test case.
* gas/arm/vfpv3xd-ldr_immediate.d: Expected disassembly.
In a SHF_COMPRESSED compressed section, the raw compressed data should
begin immediately after the compression header. This patch removes the
extra zlib header from the SHF_COMPRESSED section.
bfd/
* bfd.c (bfd_update_compression_header): Also write the zlib
header if the SHF_COMPRESSED bit cleared..
(bfd_check_compression_header): Return the uncompressed size.
* compress.c (decompress_contents): Don't skip the zlib header.
(bfd_compress_section_contents): Properly handle ELFCOMPRESS_ZLIB,
which doesn't have the zlib header.
(bfd_init_section_decompress_status): Likewise.
(bfd_get_full_section_contents): Updated.
(bfd_is_section_compressed): Likewise.
(bfd_is_section_compressed_with_header): Return the uncompressed
size.
* elf.c (_bfd_elf_make_section_from_shdr): Updated.
* bfd-in2.h: Regenerated.
binutils/
* readelf.c (uncompress_section_contents): Add a parameter for
uncompressed size. Don't check the zlib header.
(load_specific_debug_section): Updated.
binutils/testsuite/
* binutils-all/compress.exp: Replace "$OBJDUMP -s -j .debug_info"
with "$OBJDUMP -W".
* binutils-all/libdw2-compressedgabi.out: Updated.
gas/
2015-05-14 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header, which
is handled by bfd_update_compression_header.
This patch adds --compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}
options to gas and objcopy for ELF files. They control how DWARF debug
sections are compressed. --compress-debug-sections=none is equivalent to
--nocompress-debug-sections. --compress-debug-sections=zlib and
--compress-debug-sections=zlib-gnu are equivalent to
--compress-debug-sections. --compress-debug-sections=zlib-gabi compresses
DWARF debug sections with SHF_COMPRESSED from the ELF ABI. No linker
changes are required to support SHF_COMPRESSED.
bfd/
* archive.c (_bfd_get_elt_at_filepos): Also copy BFD_COMPRESS_GABI
bit.
* bfd.c (bfd::flags): Increase size to 18 bits.
(BFD_COMPRESS_GABI): New.
(BFD_FLAGS_SAVED): Add BFD_COMPRESS_GABI.
(BFD_FLAGS_FOR_BFD_USE_MASK): Likewise.
(bfd_update_compression_header): New fuction.
(bfd_check_compression_header): Likewise.
(bfd_get_compression_header_size): Likewise.
(bfd_is_section_compressed_with_header): Likewise.
* compress.c (MAX_COMPRESSION_HEADER_SIZE): New.
(bfd_compress_section_contents): Return the uncompressed size if
the full section contents is compressed successfully. Support
converting from/to .zdebug* sections.
(bfd_get_full_section_contents): Call
bfd_get_compression_header_size to get compression header size.
(bfd_is_section_compressed): Renamed to ...
(bfd_is_section_compressed_with_header): This. Add a pointer
argument to return compression header size.
(bfd_is_section_compressed): Use it.
(bfd_init_section_decompress_status): Call
bfd_get_compression_header_size to get compression header size.
Return FALSE if uncompressed section size is 0.
* elf.c (_bfd_elf_make_section_from_shdr): Support converting
from/to .zdebug* sections.
* bfd-in2.h: Regenerated.
binutils/
* objcopy.c (do_debug_sections): Add compress_zlib,
compress_gnu_zlib and compress_gabi_zlib.
(copy_options): Use optional_argument on compress-debug-sections.
(copy_usage): Update --compress-debug-sections.
(copy_file): Handle compress_zlib, compress_gnu_zlib and
compress_gabi_zlib.
(copy_main): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* doc/binutils.texi: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
binutils/testsuite/
* compress.exp: Add tests for
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* binutils-all/dw2-3.rS: New file.
* binutils-all/dw2-3.rt: Likewise.
* binutils-all/libdw2-compressedgabi.out: Likewise.
gas/
* as.c (show_usage): Update --compress-debug-sections.
(std_longopts): Use optional_argument on compress-debug-sections.
(parse_args): Handle
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* as.h (compressed_debug_section_type): New.
(flag_compress_debug): Change type to compressed_debug_section_type.
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
* write.c (compress_debug): Set BFD_COMPRESS_GABI for
--compress-debug-sections=zlib-gabi. Call
bfd_get_compression_header_size to get compression header size.
Don't rename section name for --compress-debug-sections=zlib-gabi.
* config/tc-i386.c (compressed_debug_section_type): Set to
COMPRESS_DEBUG_ZLIB.
* doc/as.texinfo: Document
--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
gas/testsuite/
* gas/i386/dw2-compressed-1.d: New file.
* gas/i386/dw2-compressed-2.d: Likewise.
* gas/i386/dw2-compressed-3.d: Likewise.
* gas/i386/x86-64-dw2-compressed-2.d: Likewise.
* gas/i386/i386.exp: Run dw2-compressed-2, dw2-compressed-1,
dw2-compressed-3 and x86-64-dw2-compressed-2.
ld/testsuite/
* ld-elf/compress.exp: Add a test for
--compress-debug-sections=zlib-gabi.
(build_tests): Add 2 tests for --compress-debug-sections=zlib-gabi.
(run_tests): Likewise.
Verify linker output with zlib-gabi compressed debug input.
* ld-elf/compressed1a.d: New file.
* ld-elf/compressed1b.d: Likewise.
* ld-elf/compressed1c.d: Likewise.
There is no need to generate compressed debug section if compressed
section size is the same as before compression. We should xfail the
compressed debug section test if there are no compressed sections
binutils/testsuite/
* binutils-all/compress.exp (compression_used): New.
Xfail test if compression didn't make the section smaller.
gas/
2015-04-05 H.J. Lu <hongjiu.lu@intel.com>
* write.c (compress_debug): Don't write the zlib header if
compressed section size is the same as before compression.
No need to write the zlib header if compression didn't make the section
smaller.
PR gas/18087
* write.c (compress_debug): Don't write the zlib header if
compression didn't make the section smaller.
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
gas/
* write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
end to their alignment.
gas/testsuite/
* gas/sparc/pcrel.d: Update for changed padding in data sections.
* gas/sparc/pcrel64.d: Likewise.
ld/testsuite/
* ld-sparc/gotop32.rd: Update for changed padding in data sections.
* ld-sparc/gotop32.td: Likewise.
* ld-sparc/gotop64.rd: Likewise.
* ld-sparc/gotop64.td: Likewise.
* ld-tilegx/external.s: Align .data.
* ld-tilepro/external.s: Likewise.
Tests that bfd_perform_reloc doesn't freak over a NONE reloc at end
of section.
gas/
* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
* write.c (get_frag_for_reloc): Allow match just past end of frag.
gas/testsuite/
* gas/all/none.s,
* gas/all/none.d: New test.
* gas/all/gas.exp: Run it.
The write.c change is to make gas report an error if reg_section
symbols should leak in future. The tc-i386.c change is the real fix.
Note that the error isn't the most helpful, "redefined symbol cannot
be used on reloc", but I'm not inclined to improve what is really an
internal gas error. reg_section symbols shouldn't leak..
gas/
PR 17493
* write.c (adjust_reloc_syms): Don't allow symbols in reg_section
to be reduced to reg_section section symbol.
* gas/config/tc-i386.c (i386_finalize_immediate): Reject all
reg_section immediates.
gas/testsuite/
* gas/i386/inval-equ-2.l: Adjust.
This is to fix unitialised memory access when printing listings.
Many targets don't initialise parts of insn frags or data frags that
have fixups, relying on md_apply_fix to finalise the frag. Which is
fine normally, but means we need to run write_object_file after
errors, for listings. Otherwise MALLOC_PERTURB_=1 causes errors like:
x86_64-linux +FAIL: i386 mpx-inval-1
x86_64-linux +FAIL: i386 inval-equ-1
x86_64-linux +FAIL: i386 x86-64-mpx-inval-1
Running write_object_file after errors requires some tweaking to the
testsuite, since we then get extra errors reported from md_apply_fix.
gas/
* write.h (subsegs_finish): Delete declaration.
* write.c (subsegs_finish): Make static.
(write_object_file): Call subsegs_finish from here. Don't print
warning and error count here..
* as.c (main): ..do so here instead. Remove dead code for "no
object file generated". Split out count strings to better support
internationalisation. Don't call subsegs_finish. Tidy setting of
"keep_it". Run write_object_file even after errors.
(keep_it): Make static.
* config/obj-elf.c (elf_frob_symbol): Remove assert.
(elf_frob_file_before_adjust): Likewise.
gas/testsuite/
* gas/elf/bad-group.s: Use %function.
* gas/elf/bad-group.err: Expect correct line number. Allow
other errors.
* gas/elf/bad-size.err: Allow other errors. Match expected
error somewhat more rigorously.
* gas/i386/reloc32.l: Allow other errors.
* gas/i386/mpx-inval-1.l: Match applied relocs.
* gas/i386/x86-64-mpx-inval-1.l: Likewise, and nop padding.
* gas/i386/x86-64-mpx-inval-2.l: Match nop padding, and allow
other errors.
* gas/macros/dot.s: Use .balign.
* gas/macros/dot.l: Update alignment output.
* gas/symver/symver6.l: Allow other errors.
* write.c (resolve_reloc_expr_symbols): On REL targets don't
convert relocs who have no relocatable field either. Rephrase
the conditional so that the PC-relative check is only applied
for REL targets.
gas/testsuite/
* gas/mips/jalr3.d: New test.
* gas/mips/jalr3-n32.d: New test.
* gas/mips/jalr3-n64.d: New test.
* gas/mips/jalr3.s: New test source.
* gas/mips/mips.exp: Run the new tests.
ld/testsuite/
* ld-mips-elf/jalr3.dd: New test.
* ld-mips-elf/jalr3.ld: New test linker script.
* ld-mips-elf/mips-elf.exp: Run the new test.
* write.h (struct fix): Add fx_dot_frag field.
(dot_frag): Declare.
* write.c (dot_frag): New variable.
(fix_new_internal): Set fx_dot_frag field with dot_frag.
(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
* expr.c (expr): Save value of frag_now in dot_frag when setting
dot_value.
* read.c (emit_expr): Likewise. Delete comments.
linker relaxation.
(dwarf2_gen_line_info): Generate real, local, labels for line
numbers.
(dwarf2dbg_convert_frag): Do not finalize the computation of the
frag's symbol value when linker relaxation is enabled.
(ADDR_DELTA_LIMIT): Define.
(size_fixed_inc_line_addr): Use ADDR_DELTA_LIMIT.
(emit_fixed_inc_line_addr): Likewise.
* write.c (fixup_segment): If the subtraction of two symbols
cannot be resolved but is valid, then prevent bogus range warnings
by pre-biasing add_number.
* config/tc-h8300.h (DWARF2_USE_FIXED_ADVANCE_PC): Define to 0.
* gas/lns/lns.exp: Use alternate lns-common test for targets
enabling linker relaxation.
* gas/lns/lns-big-delta.d: Allow for output from architectures
with 32-bit addresses.
2011-08-04 H.J. Lu <hongjiu.lu@intel.com>
PR gas/13056
* output-file.c (output_file_close): Call bfd_cache_close_all
on error.
* write.c (write_object_file): Revert the last change.
value when reporting the inability to write to the output file.
* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
frag that has a non-zero fill value.
* gas/all/align.d: Skip for the RX.
* gas/elf/group1a.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/elf.exp: Do not run section5 test for the RX port.
* gas/elf/section4.d: Likewise.
* gas/elf/section7.d: Likewise.
* gas/macros/semi.s: Fill with a non-zero pattern.
* gas/macros/semi.d: Expect non-zero fill value.
* gas/rx/bcnd.d: Update expected disassembly.
* gas/rx/bra.d: Likewise.
* gas/rx/macros.inc: Add reg1 macro.
* gas/rx/max.sm: Use reg1 macro to avoid generating illegal NOP
instruction.
* gas/rx/mov.sm: Likewise.
* gas/rx/max.d: Update expected disassembly.
* gas/rx/mov.d: Likewise.
* gas/rx/rx-asm-good.s: Use Renesas section names.
* gas/rx/rx-asm-good.d: Update expected disassembly.
* symbols.c (S_FORCE_RELOC): Return true for indirect functions
even if !strict.
* expr.c (operand): Don't convert absolute symbols to constants
if S_FORCE_RELOC is true.
(expr): Only reduce subtractions between different symbols if
S_FORCE_RELOC is false for both of them.
* write.c (fixup_segment): Don't remove symbols if S_FORCE_RELOC
is true for them, regardless of their segment.
gas/testsuite/
* gas/i386/ifunc-2.s, gas/i386/ifunc-2.l: New test.
* gas/i386/ifunc-3.s, gas/i386/ifunc-3.d: Likeise.
* gas/i386/i386.exp: Run them.