* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): SR_REGNUM is
now part of gdbarch_tdep structure.
(sh_gdbarch_init): Initialize SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add field SR_REGNUM.
* config/sh/tm-sh.h (struct gdbarch_tdep): Rename fields
{FP15,DR14,FV12}_REGNUM to {FP,DR,FV}_LAST_REGNUM.
* sh-tdep.c (sh_sh3e_register_virtual_type,
sh_sh4_register_virtual_type, sh_do_registers_info,
sh_gdbarch_init, sh_sh4_register_byte, sh_sh4_register_raw_size,
sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual,
sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register,
sh_store_pseudo_register, sh_do_pseudo_register): Ditto.
* sh-tdep.c (sh_gdbarch_init): Use a function pointer to set the
disassembly print function.
(_initialize_sh_tdep): Initialize tm_print_insn using the function
pointer.
* config/sh/tm-sh.h (struct gdbarch_tdep): Get rid of
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM, they are not used
anywhere.
* sh-tdep.c (sh_gdbarch_init): Don't initialize
DR{2,4,6,8,10,12}_REGNUM, FV{4,8}_REGNUM.
* config/sh/tm-linux.h: New file. Include generic tm-linux.h,
plus tm-sh.h, then define SVR4_FETCH_LINK_MAP_OFFSETS to use
the sh target function instead of the default link map offsets.
* config/sh/sh.mt: Add solib.o and solib-svr4.o to TDEPFILES.
Use sh/tm-linux.h instead of sh/tm-sh.h.
* sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets):
New function. Construct target-specific link map offsets.
* i386-linux-tdep.c (i386_linux_svr4_fetch_link_map_offsets:
New function. Construct target-specific link map offsets.
* config/i386/tm-linux.h: Use above function instead of default.
2000-10-30 Michael Snyder <msnyder@cleaver.cygnus.com>
* config/i386/tm-linux.h: Remove definition of SVR4_SHARED_LIBS,
and inclusion of solib.h. Move up into ../tm-linux.h.
config/tm-linux.h: Define SVR4_SHARED_LIBS, include solib.h.
* sh-tdep.c (sh_sh4_register_name, sh_sh4_register_byte,
sh_sh4_register_raw_size, sh_sh4_register_virtual_type,
sh_fetch_pseudo_register, sh_store_pseudo_register,
sh_do_pseudo_register, sh_gdbarch_init): Fix names for pseudoregs,
they should be numbered as drx fvy where x and y are multiples of
2 and 4 respectively.
* config/sh/tm-sh.h: Fix names of pseudo regs.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add sh4 specific
pseudo registers.
(DO_REGISTERS_INFO): Define.
* sh-tdep.c (sh_sh4_register_name): New function.
(sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update
signature.
(sh_show_regs_command): New function. Actual function called by
the 'regs' command.
(sh_register_byte): Rename to...
(sh_default_register_byte): ...New function.
(sh_sh4_register_byte): New function.
(sh_register_raw_size): Rename to...
(sh_default_register_raw_size): ...New function.
(sh_sh4_register_raw_size): New function.
(sh_sh4_register_virtual_type): New function.
(sh_sh4_build_float_register_type): New function.
(sh_fetch_pseudo_register, sh_store_pseudo_register): New
functions.
(fv_reg_base_num, dr_reg_base_num): New functions.
(do_fv_register_info, do_dr_register_info, sh_do_pseudo_register,
sh_do_fp_register, sh_do_register, sh_print_register,
sh_do_registers_info): New functions.
(sh_gdbarch_init): Initialize sh4 pseudo registers to -1. Update
architecture specific parts.
(_initialize_sh_tdep): Use sh_show_regs_command for 'regs' command.
* config/sh/tm-sh.h (STORE_RETURN_VALUE): Redefine as
sh_store_return_value().
* sh-tdep.c (sh_store_return_value): New function. Store the
value returned by a function into the appropriate register.
2000-07-10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* sh-tdep.c (sh_skip_prologue): Before looking at the actual
instructions, try to see if the symbol table can be of help, by
calling after_prologue(). If this doesn't work, call
skip_prologue_hard_way().
(skip_prologue_hard_way): Renamed from sh_skip_prologue. Add some
more instruction pattern matching for pushing of arguments, and
manipulation of r14.
(after_prologue): New function. Use symbol table info to determine
the end of the prologue, if possible.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
(mempool): Just free any buffer prior to reuse. Don't bother with realloc.
(flag_single_step): New function.
(skip_message): Detect "helpful" Windows CE messages and skip sending them to
the host.
(wait_for_debug_event): Use skip_message to avoid sending debug messages to the
host.
(dispatch): Prelimary implementation of single step detection.
* wince.c: Rework SH single stepping code to be more consistent with other
wince targets.
(handle_output_debug_string): Allow first chance exceptions to come through
since they seem to be all that we get on some versions of Windows CE.
(check_for_step): New function, conditionally compiled based on target.
(regptr): Delete obsolete function.
(handle_exception): Detect illegal instructions.
(get_child_debug_event): Return success only if event code matches target.
(child_create_inferior): Reflect change to get_child_debug_event arguments.
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
ChangeLog sh-tdep.c config/sh/tm-sh.h
* config/sh/tm-sh.h: add define for FPSCR_REGNUM
* sh-tdep.c (sh_show_regs): print out all registers for
the current processor
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
Added some generic target-independant code for managing call-dummy frames.
Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
* blockframe.c: Add target-independant support for managing
CALL_DUMMY frames on the host side.
* frame.h: Declarations for generic CALL_DUMMY frame support.
* h8300-tdep.c: Add target function calls using generic frame support.
* config/h8300/tm-h8300.h: config for generic target function calls.
start-sanitize-m32r
* m32r-tdep.c: Add target function calls using generic frame support.
* config/m32r/tm-m32r.h: config for generic target function calls.
end-sanitize-m32r
* sh-tdep.c: Add target function calls using generic frame support.
* config/sh/tm-sh.h: config for generic target function calls.
start-sanitize-v850
* v850-tdep.c: Add target function calls using generic frame support.
* config/v850/tm-v850.h: config for generic target function calls.
end-sanitize-v850
* valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
* sh-tdep.c: Add functionality for target function calls.
* config/sh/tm-sh.h: Add support for target function calls.
This is a safety check-in: everything works, and there'll be another
clean-up round shortly.
