While enhancing the warning printed in when SuspendThread fails,
I accidently changed the format used to print the error code
from %u to %d. This patch reverts it back.
gdb/ChangeLog:
* windows-nat.c (thread_rec): Revert format used to print
error code returned by SuspendThread from %d back to %u.
The windows-nat.c debug traces print the thread ID in base 16,
but give no indication of it. So, in a trace like the following...
gdb: kernel event for pid=4816 tid=720 code=CREATE_THREAD_DEBUG_EVENT)
... where tid is "720", it's easy to be confused and think that
the thread ID is 720 rather than 0x720. This patch avoids the
confusion by adding the usual "0x" prefix used for hexadecimal
values.
gdb/ChangeLog:
* windows-nat.c (windows_continue): Add "0x" prefix for thread
ID in debug trace.
(get_windows_debug_event): Likewise, for all debug traces.
This patch adds the thread ID to a warning printed when a call to
SuspendThread fails. It will help investigate issues, particularly
when correlated with the various debug traces provided by the
windows-nat module.
For the record, the output has been changed from...
warning: SuspendThread failed. (winerr 6)
... to ...
warning: SuspendThread (tid=0x720) failed. (winerr 6)
gdb/ChangeLog:
* window-nat.c (thread_rec): Add thread ID in SuspendThread
warning message.
This patch makes GDBserver support multi-process + biarch.
Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you
see this:
Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...
Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.
A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior. This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout. So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.
A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process. Each `struct process_info' holds a pointer to a target
description. The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).
The low target's arch_setup routines are responsible for setting the
process'es correct tdesc. This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.
The threads' regcaches are now created lazily. The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup). Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.
This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver. It currently fails, without this patch.
The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.
Re. the linux-low.c & friends changes. Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient. A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.
The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.
On the x86 side:
I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set. This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).
Tested:
GNU/Linux IA64
GNU/Linux MIPS64
GNU/Linux PowerPC (Fedora 16)
GNU/Linux s390x (Fedora 16)
GNU/Linux sparc64 (Debian)
GNU/Linux x86_64, -m64 and -m32 (Fedora 17)
Cross built, and smoke tested:
i686-w64-mingw32, under Wine.
GNU/Linux TI C6x, by Yao Qi.
Cross built but otherwise not tested:
aarch64-linux-gnu
arm-linux-gnu
m68k-linux
nios2-linux-gnu
sh-linux-gnu
spu
tilegx-unknown-linux-gnu
Completely untested:
GNU/Linux Blackfin
GNU/Linux CRIS
GNU/Linux CRISv32
GNU/Linux TI Xtensa
GNU/Linux M32R
LynxOS
QNX NTO
gdb/gdbserver/
2013-06-07 Pedro Alves <palves@redhat.com>
* Makefile.in (OBS): Add tdesc.o.
(IPA_OBJS): Add tdesc-ipa.o.
(tdesc-ipa.o): New rule.
* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
interface.
* linux-low.c (new_inferior): Delete.
(disabled_regsets, num_regsets): Delete.
(linux_add_process): Adjust to set the new per-process
new_inferior flag.
(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
(linux_wait_for_lwp): Adjust. Only call arch_setup if the event
was a stop. When calling arch_setup, switch the current inferior
to the thread that got an event.
(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
(regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): New regsets_info parameter.
Adjust to use it.
(linux_register_in_regsets): New regs_info parameter. Adjust to
use it.
(register_addr, fetch_register, store_register): New usrregs_info
parameter. Adjust to use it.
(usr_fetch_inferior_registers, usr_store_inferior_registers): New
parameter regs_info. Adjust to use it.
(linux_fetch_registers): Get the current inferior's regs_info, and
adjust to use it.
(linux_store_registers): Ditto.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
(initialize_low): Don't initialize the target_regsets here. Call
initialize_low_arch.
* linux-low.h (target_regsets): Delete declaration.
(struct regsets_info): New.
(struct usrregs_info): New.
(struct regs_info): New.
(struct process_info_private) <new_inferior>: New field.
(struct linux_target_ops): Delete the num_regs, regmap, and
regset_bitmap fields. New field regs_info.
[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
* i387-fp.c (num_xmm_registers): Delete.
(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
calls to new interface.
(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
(i387_xsave_to_cache): Adjust find_regno calls to new interface.
Infer the number of xmm registers from the regcache's target
description.
* i387-fp.h (num_xmm_registers): Delete.
* inferiors.c (add_thread): Don't install the thread's regcache
here.
* proc-service.c (gregset_info): Fetch the current inferior's
regs_info. Adjust to use it.
* regcache.c: Include tdesc.h.
(register_bytes, reg_defs, num_registers)
(gdbserver_expedite_regs): Delete.
(get_thread_regcache): If the thread doesn't have a regcache yet,
create one, instead of aborting gdbserver.
(regcache_invalidate_one): Rename to ...
(regcache_invalidate_thread): ... this.
(regcache_invalidate_one): New.
(regcache_invalidate): Only invalidate registers of the current
process.
(init_register_cache): Add target_desc parameter, and use it.
(new_register_cache): Ditto. Assert the target description has a
non zero registers_size.
(regcache_cpy): Add assertions. Adjust.
(realloc_register_cache, set_register_cache): Delete.
(registers_to_string, registers_from_string): Adjust.
(find_register_by_name, find_regno, find_register_by_number)
(register_cache_size): Add target_desc parameter, and use it.
(free_register_cache_thread, free_register_cache_thread_one)
(regcache_release, register_cache_size): New.
(register_size): Add target_desc parameter, and use it.
(register_data, supply_register, supply_register_zeroed)
(supply_regblock, supply_register_by_name, collect_register)
(collect_register_as_string, collect_register_by_name): Adjust.
* regcache.h (struct target_desc): Forward declare.
(struct regcache) <tdesc>: New field.
(init_register_cache, new_register_cache): Add target_desc
parameter.
(regcache_invalidate_thread): Declare.
(regcache_invalidate_one): Delete declaration.
(regcache_release): Declare.
(find_register_by_number, register_cache_size, register_size)
(find_regno): Add target_desc parameter.
(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
declarations.
* remote-utils.c: Include tdesc.h.
(outreg, prepare_resume_reply): Adjust.
* server.c: Include tdesc.h.
(gdbserver_xmltarget): Delete declaration.
(get_features_xml, process_serial_event): Adjust.
* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
declare.
(struct process_info) <tdesc>: New field.
(ipa_tdesc): Declare.
* tdesc.c: New file.
* tdesc.h: New file.
* tracepoint.c: Include tdesc.h.
[IN_PROCESS_AGENT] (ipa_tdesc): Define.
(get_context_regcache): Adjust to pass ipa_tdesc down.
(do_action_at_tracepoint): Adjust to get the register cache size
from the context regcache's description.
(traceframe_walk_blocks): Adjust to get the register cache size
from the current trace frame's description.
(traceframe_get_pc): Adjust to get current trace frame's
description and pass it down.
(gdb_collect): Adjust to get the register cache size from the
IPA's description.
* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
(gdbserver_xmltarget): Delete.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-i386-ipa.c (tdesc_i386_linux): Declare.
(initialize_low_tracepoint): Set the ipa's target description.
* linux-x86-low.c: Include tdesc.h.
[__x86_64__] (is_64bit_tdesc): New.
(ps_get_thread_area, x86_get_thread_area): Use it.
(i386_cannot_store_register): Rename to ...
(x86_cannot_store_register): ... this. Use is_64bit_tdesc.
(i386_cannot_fetch_register): Rename to ...
(x86_cannot_fetch_register): ... this. Use is_64bit_tdesc.
(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
to new interface.
(target_regsets): Rename to ...
(x86_regsets): ... this.
(x86_get_pc, x86_set_pc): Adjust register_size calls to new
interface.
(x86_siginfo_fixup): Use is_64bit_tdesc.
[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
(tdesc_x32_avx_linux, tdesc_x32_linux)
(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
Declare.
(x86_linux_update_xmltarget): Delete.
(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
(have_ptrace_getfpxregs, have_ptrace_getregset): New.
(AMD64_LINUX_USER64_CS): New.
(x86_linux_read_description): New, based on
x86_linux_update_xmltarget.
(same_process_callback): New.
(x86_arch_setup_process_callback): New.
(x86_linux_update_xmltarget): New.
(x86_regsets_info): New.
(amd64_linux_regs_info): New.
(i386_linux_usrregs_info): New.
(i386_linux_regs_info): New.
(x86_linux_regs_info): New.
(x86_arch_setup): Reimplement.
(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
(x86_emit_ops): Ditto.
(the_low_target): Adjust. Install x86_linux_regs_info,
x86_cannot_fetch_register, and x86_cannot_store_register.
(initialize_low_arch): New.
* linux-ia64-low.c (tdesc_ia64): Declare.
(ia64_fetch_register): Adjust.
(ia64_usrregs_info, regs_info): New globals.
(ia64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sparc-low.c (tdesc_sparc64): Declare.
(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
Adjust.
(sparc_arch_setup): New function.
(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
(tdesc_powerpc_isa205_vsx64l): Declare.
(ppc_cannot_store_register, ppc_collect_ptrace_register)
(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
(ppc_set_pc, ppc_get_hwcap): Adjust.
(ppc_usrregs_info): Forward declare.
(!__powerpc64__) ppc_regmap_adjusted: New global.
(ppc_arch_setup): Adjust to the current process'es target
description.
(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
(ppc_store_evrregset): Adjust.
(target_regsets): Rename to ...
(ppc_regsets): ... this, and make static.
(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
(ppc_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
(tdesc_s390x_linux64v2): Declare.
(s390_collect_ptrace_register, s390_supply_ptrace_register)
(s390_fill_gregset, s390_store_last_break): Adjust.
(target_regsets): Rename to ...
(s390_regsets): ... this, and make static.
(s390_get_pc, s390_set_pc): Adjust.
(s390_get_hwcap): New target_desc parameter, and use it.
[__s390x__] (have_hwcap_s390_high_gprs): New global.
(s390_arch_setup): Adjust to set the current process'es target
description. Don't adjust the regmap.
(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
(regs_info_3264): New globals.
(s390_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
[__mips64] (init_registers_mips_linux)
(init_registers_mips_dsp_linux): Delete defines.
[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
(have_dsp): New global.
(mips_read_description): New, based on mips_arch_setup.
(mips_arch_setup): Reimplement.
(get_usrregs_info): New function.
(mips_cannot_fetch_register, mips_cannot_store_register)
(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
(mips_fill_fpregset, mips_store_fpregset): Adjust.
(target_regsets): Rename to ...
(mips_regsets): ... this, and make static.
(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
(dsp_regs_info, regs_info): New globals.
(mips_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
Declare.
(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
(arm_read_description): New, with bits factored from
arm_arch_setup.
(arm_arch_setup): Reimplement.
(target_regsets): Rename to ...
(arm_regsets): ... this, and make static.
(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
(arm_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m68k-low.c (tdesc_m68k): Declare.
(target_regsets): Rename to ...
(m68k_regsets): ... this, and make static.
(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
(m68k_regs_info): New function.
(m68k_arch_setup): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-sh-low.c (tdesc_sharch): Declare.
(target_regsets): Rename to ...
(sh_regsets): ... this, and make static.
(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
(sh_regs_info, sh_arch_setup): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-bfin-low.c (tdesc_bfin): Declare.
(bfin_arch_setup): New function.
(bfin_usrregs_info, regs_info): New globals.
(bfin_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_cris): Declare.
(cris_arch_setup): New function.
(cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-cris-low.c (tdesc_crisv32): Declare.
(cris_arch_setup): New function.
(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
(cris_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-m32r-low.c (tdesc_m32r): Declare.
(m32r_arch_setup): New function.
(m32r_usrregs_info, regs_info): New globals.
(m32r_regs_info): Adjust.
(initialize_low_arch): New function.
* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
(tic6x_usrregs_info): Forward declare.
(tic6x_read_description): New function, based on ...
(tic6x_arch_setup): ... this. Reimplement.
(target_regsets): Rename to ...
(tic6x_regsets): ... this, and make static.
(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
(tic6x_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-xtensa-low.c (tdesc_xtensa): Declare.
(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
(target_regsets): Rename to ...
(xtensa_regsets): ... this, and make static.
(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
globals.
(xtensa_arch_setup, xtensa_regs_info): New functions.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-nios2-low.c (tdesc_nios2_linux): Declare.
(nios2_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(nios2_regsets): ... this.
(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
(nios2_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-aarch64-low.c (tdesc_aarch64): Declare.
(aarch64_arch_setup): Set the current process'es tdesc.
(target_regsets): Rename to ...
(aarch64_regsets): ... this.
(aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
(aarch64_regs_info): New function.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
globals.
(target_regsets): Rename to ...
(tile_regsets): ... this.
(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
(tile_regs_info): New function.
(tile_arch_setup): Set the current process'es tdesc.
(the_low_target): Adjust.
(initialize_low_arch): New function.
* spu-low.c (tdesc_spu): Declare.
(spu_create_inferior, spu_attach): Set the new process'es tdesc.
* win32-arm-low.c (tdesc_arm): Declare.
(arm_arch_setup): New function.
(the_low_target): Install arm_arch_setup instead of
init_registers_arm.
* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
(init_windows_x86): Rename to ...
(i386_arch_setup): ... this. Set `win32_tdesc'.
(the_low_target): Adjust.
* win32-low.c (win32_tdesc): New global.
(child_add_thread): Don't create the thread cache here.
(do_initial_child_stuff): Set the new process'es tdesc.
* win32-low.h (struct target_desc): Forward declare.
(win32_tdesc): Declare.
* lynx-i386-low.c (tdesc_i386): Declare global.
(lynx_i386_arch_setup): Set `lynx_tdesc'.
* lynx-low.c (lynx_tdesc): New global.
(lynx_add_process): Set the new process'es tdesc.
* lynx-low.h (struct target_desc): Forward declare.
(lynx_tdesc): Declare global.
* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
(lynx_ppc_arch_setup): Set `lynx_tdesc'.
* nto-low.c (nto_tdesc): New global.
(do_attach): Set the new process'es tdesc.
* nto-low.h (struct target_desc): Forward declare.
(nto_tdesc): Declare.
* nto-x86-low.c (tdesc_i386): Declare.
(nto_x86_arch_setup): Set `nto_tdesc'.
gdb/
2013-06-07 Pedro Alves <palves@redhat.com>
* regformats/regdat.sh: Output #include tdesc.h. Make globals
static. Output a global target description pointer.
(init_registers_${name}): Adjust to initialize a
target description structure.
In build_address_symbolic we call gdbarch_addr_bits_remove for
symbols in the symbol table but not for minimal symbols. This
causes a failure in gdb.cp/virtfunc.exp on ARM, as the address
of the virtual thunk is given an offset of 1 when in Thumb mode.
gdb/ChangeLog:
2013-06-07 Will Newton <will.newton@linaro.org>
* printcmd.c (build_address_symbolic): Call
gdbarch_addr_bits_remove for text minimal symbols.
* cp-namespace.c (find_symbol_in_baseclass): Call
cp_lookup_symbol_in_namespace instead of cp_lookup_symbol_namespace.
Check result of call to lookup_symbol_static.
Call lookup_static_symbol_aux unconditionally.
Call check_typedef on base types before accessing them.
(cp_lookup_nested_symbol): Fix comment.
testsuite/
* gdb.cp/derivation2.cc: New file.
* gdb.cp/derivation.cc (main): Call foo2.
* gdb.cp/derivation.exp: Add tests for typedefs in another
file, and when there's an active block.
was received. This patch fixes it.
2013-06-04 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* remote.c (remote_wait_as): Restore signal handler before returning
when GDB gets a notification.
* breakpoint.h (handle_solib_event): Moved function declaration
to solib.h.
* breakpoint.c (handle_solib_event): Moved function to solib.c.
(bpstat_stop_status): Pass new argument to handle_solib_event.
* solib.h (update_solib_breakpoints): New function declaration.
(handle_solib_event): Moved function declaration from
breakpoint.h.
* solib.c (update_solib_breakpoints): New function.
(handle_solib_event): Moved function from breakpoint.c.
Updated to call solib_ops->handle_event if not NULL.
* solist.h (target_so_ops): New fields "update_breakpoints" and
"handle_event".
* infrun.c (set_stop_on_solib_events): New function.
(_initialize_infrun): Use the above for "set
stop-on-solib-events".
(handle_inferior_event): Pass new argument to handle_solib_event.
* solib-svr4.c (probe.h): New include.
(svr4_free_library_list): New forward declaration.
(probe_action): New enum.
(probe_info): New struct.
(probe_info): New static variable.
(NUM_PROBES): New definition.
(svr4_info): New fields "using_xfer", "probes_table" and
"solib_list".
(free_probes_table): New function.
(free_solib_list): New function.
(svr4_pspace_data_cleanup): Free probes table and solib list.
(svr4_copy_library_list): New function.
(svr4_current_sos_via_xfer_libraries): New parameter "annex".
(svr4_read_so_list): New parameter "prev_lm".
(svr4_current_sos_direct): Renamed from "svr4_current_sos".
(svr4_current_sos): New function.
(probe_and_action): New struct.
(hash_probe_and_action): New function.
(equal_probe_and_action): Likewise.
(register_solib_event_probe): Likewise.
(solib_event_probe_at): Likewise.
(solib_event_probe_action): Likewise.
(solist_update_full): Likewise.
(solist_update_incremental): Likewise.
(disable_probes_interface_cleanup): Likewise.
(svr4_handle_solib_event): Likewise.
(svr4_update_solib_event_breakpoint): Likewise.
(svr4_update_solib_event_breakpoints): Likewise.
(svr4_create_solib_event_breakpoints): Likewise.
(enable_break): Free probes table before creating breakpoints.
Use svr4_create_solib_event_breakpoints to create breakpoints.
(svr4_solib_create_inferior_hook): Free the solib list.
(_initialize_svr4_solib): Initialise
svr4_so_ops.handle_solib_event and svr4_so_ops.update_breakpoints.
* target.h (target_ops): New field
"to_augmented_libraries_svr4_read".
(target_augmented_libraries_svr4_read): New macro.
* target.c (update_current_target): Handle
to_augmented_libraries_svr4_read.
* remote.c (remote_state): New field
"augmented_libraries_svr4_read".
(remote_augmented_libraries_svr4_read_feature): New function.
(remote_protocol_features): Add entry for
"augmented-libraries-svr4-read".
(remote_augmented_libraries_svr4_read): New function.
(init_remote_ops): Initialize
remote_ops.to_augmented_libraries_svr4_read.
* objfiles.h (inhibit_section_map_updates): New function
declaration.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* objfiles.c (objfile_pspace_info): Removed field
"objfiles_changed_p". New fields "new_objfiles_available",
"section_map_dirty" and "inhibit_updates".
(allocate_objfile): Set new_objfiles_available.
(free_objfile): Set section_map_dirty.
(objfile_relocate1): Likewise.
(in_plt_section): Likewise.
(find_pc_section): Update the conditions under which the
section map will be updated.
(inhibit_section_map_updates): New function.
(resume_section_map_updates): Likewise.
(resume_section_map_updates_cleanup): Likewise.
* probe.h (get_probe_argument_count): New declaration.
(evaluate_probe_argument): Likewise.
* probe.c (get_probe_argument_count): New function.
(evaluate_probe_argument): Likewise.
(probe_safe_evaluate_at_pc): Use the above new functions.
* rs6000-tdep.c (read_insn): Add frame param, don't assume big-endian.
(ppc_insns_match_pattern): Add frame param. Avoid multiple
target mem reads on optional insns.
* ppc-linux-tdep.c (ppc_skip_trampoline_code): Update
ppc_insns_match_pattern calls.
* ppc64-tdep.c (ppc64_standard_linkage2, ppc64_standard_linkage3):
Add match for power7 thread safety insns, and new order of
std 2,40(1) insn. Correct code shown for _dl_runtime_resolve
invocation in comment, and update rest of comment.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN,
PPC64_STANDARD_LINKAGE3_LEN): Delete.
(ppc64_standard_linkage2_target): Update insn offsets.
(ppc64_skip_trampoline_code): Use a single insn buffer. Match newer
stubs first. Update calls.
This patch indirectly causes a SEGV by creating a dangling pointer.
Reverting this patch while working on a clearer memory management
method for this part of the code.
gdb/Changelog:
Revert:
* machoread.c (macho_symfile_read): Assign first cleanup to
'back_to'.
* mi/mi-cmd-var.c (mi_no_values, mi_simple_values): Move to
mi-parse.c. Make them static.
(mi_all_values): Likewise.
(mi_parse_values_option): Move to mi-parse.c. Rename it to
mi_parse_print_values. Make it external.
* mi/mi-cmds.h (mi_no_values, mi_simple_values, mi_all_values):
Remove the declarations.
* mi/mi-parse.c (mi_parse_print_values): Moved from mi-cmd-var.c.
* mi/mi-parse.h (mi_parse_print_values): Declare.
* mi/mi-cmd-stack.c: Include mi-parse.h.
(parse_print_values): Remove
(mi_cmd_stack_list_locals): Call mi_parse_print_values instead
of parse_print_values.
(mi_cmd_stack_list_args, mi_cmd_stack_list_variables): Likewise.
It turns out that maintenance_expand_symtabs was missing a call to
do_cleanups. I found this using the cleanup checker.
* symmisc.c (maintenance_expand_symtabs): Call do_cleanups.
xml-support.c has a function that returns a cleanup via an out parameter.
This changes this function to be a normal cleanup constructor --
returning the cleanup directly and returning the other result via an
out parameter.
This is sort of a hack, but it lets the checker work here.
I also noticed that gdb_xml_create_parser_and_cleanup does not need to
be exported any more.
* xml-support.c (gdb_xml_create_parser_and_cleanup): Rename from
gdb_xml_create_parser_and_cleanup_1. Return a cleanup. Remove
'old_chain' argument. Add 'parser_result' argument.
(gdb_xml_create_parser_and_cleanup): Remove old version.
(gdb_xml_parse_quick): Update.
(xml_process_xincludes): Update.
* xml-support.h (gdb_xml_create_parser_and_cleanup): Don't
declare.
compile_rx_or_error looks like a constructor, but it can return NULL.
This patch changes it to remove the NULL return, making it work
like any other cleanup constructor.
This is a stylistic patch but I think it is also better for code to
follow the normal conventions.
* probe.c (collect_probes): Check arguments for NULL before
calling compile_rx_or_error.
* utils.c (compile_rx_or_error): Require 'rx' to be non-NULL.
Remove NULL return.
This fixes some of the problems in infrun.c that the checker reported.
I filed the remaining problems as bugs.
This patch is purely stylistic.
* infrun.c (adjust_pc_after_break): Introduce an outer null
cleanup.
This is a stylistic change in mi-cmd-var.c that adds outer cleanups
where needed by the checker.
* mi/mi-cmd-var.c (varobj_update_one): Add an outer null cleanup.
read_command_lines_1 had some (IMNSHO) spaghetti-ish code for cleanup
handling. This makes the code much simpler to understand, by
introducing an outer cleanup.
This is another case where a stylistic change for the checker is also
nice for the reader.
* cli/cli-script.c (read_command_lines_1): Use a null cleanup
for 'old_chain'. Do not check 'head' before processing
cleanups.
mi-cmd-stack.d had a conditional cleanup, "cleanup_tuple" that
confused the checker. However, there was no need for this, since it
was only used via do_cleanups at the end of the function, just before
another call to do_cleanups.
So, while this is a stylistic patch for the checker, I also consider
it a generic improvement for readers of the code.
* mi/mi-cmd-stack.c (list_arg_or_local): Remove
"cleanup_tuple".
This is a stylistic change to make some code in dbxread.c analyzable
by the checker.
* dbxread.c (dbx_read_symtab): Declare 'back_to' in a more
inner scope. Unconditionally call do_cleanups.
This is a stylistic change to make it so the checker can analyze a
function in linux-thread-db.c.
* linux-thread-db.c (thread_db_load_search): Unconditionally
call do_cleanups.
solib_aix_bfd_open has an early "return" that doesn't run cleanups.
This fixes the problem by dropping the null_cleanup and using a later
cleanup as the master cleanup for the function.
* solib-aix.c (solib_aix_bfd_open): Don't use a null cleanup
for 'cleanup'; instead use a later one.
The checker does not understand the idiom
if (except.reason < 0) {
do_cleanups (whatever);
GDB_PY_HANDLE_EXCEPTION (except);
}
because it doesn't realize that the nested 'if' actually has the same
condition.
This fixes instances of this to be more explicit.
* python/py-breakpoint.c (bppy_get_commands): Use
explicit, unconditional return.
* python/py-frame.c (frapy_read_var): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
cp_lookup_symbol_imports_or_template could return without
running cleanups.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Call
do_cleanups on all return paths.
Some code in mipsread.c could leak cleanups along some return paths.
* mipsread.c (read_alphacoff_dynamic_symtab): Call do_cleanups
along all return paths.
find_separate_debug_file could leak a cleanup along some return paths.
* symfile.c (find_separate_debug_file): Call do_cleanups
along all return paths.
search_symbols had some bad code resulting in a cleanup being both
discarded and run.
* symtab.c (search_symbols): Introduce a null cleanup for
'retval_chain'.
Some code in py-value.c could exit a loop without running some
cleanups made in the loop.
* python/py-value.c (valpy_binop): Call do_cleanups before
exiting loop.
