well as S_IS_EXTERNAL.
(tc_fix_adjustable): Likewise.
* config/tc-sparc.c (md_apply_fix): In OBJ_ELF case, check for
S_IS_WEAK as well as S_IS_EXTERNAL when deciding whether to return
early.
(tc_gen_reloc): Check S_IS_WEAK as wel as S_IS_EXTERNAL when
deciding whether to convert BFD_RELOC_32_PCREL_S2 if PIC.
32 bit arch.
(default_compatible): Delete.
(sparc_ffs): New function.
(md_begin): Only call SPARC_OPCODE_CONFLICT_P once.
(sparc_ip): Rewrite architecture match and bump logic.
(SF_GET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
(SF_SET_ADJ_LNNOPTR): Define (non BFD_ASSEMBLER).
* config/obj-coff.c (obj_coff_endef): Set ADJ_LNNOPTR when LNNOPTR
is set.
(w_symbols): If ADJ_LNNOPTR is set, add the section lnnoptr field
to the symbol lnnoptr field, to get the correct file offset.
PR 7428.
* configure.in: Remove duplicate setting of cpu_type. Check
whether opcodes library is required for on all targets, not just
primary one.
* configure: Rebuild.
* read.c (s_mri_sect): Don't return '\0' in type. Set all
appropriate flags in BFD section.
* configure.in (m68k-*-psos*): New target.
* configure: Rebuild.
* config/te-psos.h: New file.
* config/tc-m68k.c (comment_chars): Don't include '#' if TE_PSOS
is defined.
* gas/mips/lb-xgot.d, gas/mips/ld-xgot.d: New tests.
* gas/mips/lif-xgot.d, gas/mips/ulh-xgot.d: New tests.
* gas/mips/mips.exp: Run new tests if svr4pic.
(s_extern): Don't declare.
(reg_needs_delay): New static function.
(macro_build): Permit GOT/CALL_HI/LO relocs.
(macro_build_lui): If place is not NULL, use the number in the
expression.
(load_address): Handle mips_big_got case.
(macro): Handle mips_big_got for M_LA_AB, M_JAL_A, and load and
store macros.
(OPTION_XGOT): Define.
(md_longopts): Add "xgot" if OBJ_ELF.
(md_parse_option): Handle -xgot.
(md_show_usage): Mention -xgot.
(md_apply_fix): Permit GOT/CALL_HI/LO relocs.
(tc_gen_reloc): Handle GOT/CALL_HI/LO relocs.
(s_mri): New function.
* read.h (s_mri): Declare.
* app.c (scrub_m68k_mri): New static variable.
(mri_pseudo): New static variable.
(do_scrub_begin): Add m68k_mri parameter. Use it rather than
flag_m68k_mri. Initialize scrub_m68k_mri.
(mri_state, mri_last_ch): New static variables.
(struct app_save): Add scrub_m68k_mri, mri_state, and mri_last_ch
fields.
(app_push): Save new fields.
(app_pop): Restore new fields.
(do_scrub_chars): Check scrub_m68k_mri rather than flag_mri_mri.
If TC_M68K, use a trivial state machine to look for occurrences of
the .mri pseudo-op, and change the mode appropriately.
* as.h (do_scrub_begin): Update prototype.
* input-scrub.c (input_scrub_begin): Pass flag_m68k_mri to
do_scrub_begin.
* config/tc-m68k.c (reg_prefix_optional_seen): New static
variable.
(m68k_mri_mode_change): New function.
(md_parse_option): Set reg_prefix_optional_seen.
* config/tc-m68k.h (m68k_mri_mode_change): Declare.
(MRI_MODE_CHANGE): Define.
* doc/as.texinfo: Document .mri pseudo-op.
Support for OBJ_ELF on m68k, mostly inside #ifdef OBJ_ELF:
* config/m68k-parse.h (enum pic_relocation): Define.
(struct m68k_exp): Add pic_reloc field.
* config/tc-m68k.h (TC_RELOC_RTSYM_LOC_FIXUP): Define.
(tc_fix_adjustable): Define to call tc_m68k_fix_adjustable.
(NO_RELOC): Define to BFD_RELOC_NONE if BFD_ASSEMBLER, to zero
otherwise.
* config/tc-m68k.c: Delete definition of NO_RELOC.
(struct m68k_it): Add pic_reloc field.
(add_fix): Copy over pic_reloc field.
(md_pseudo_table): Interpret .align parameter as byte count.
(mote_pseudo_table): Likewise.
(tc_m68k_fix_adjustable): New function.
(get_reloc_code): New function.
(md_assemble): Use it as last argument to fix_new_exp.
(md_apply_fix_2): For a relocation against a symbol don't put the
addend into the data.
(tc_gen_reloc): Different addend computation for OBJ_ELF.
(m68k_ip): Don't relax an operand that requires pic relocation.
(md_begin): Align .text, .data and .bss on 4 byte boundary by
default.
* write.c (fixup_segment): Don't add symbol value to addend if
TC_M68K and OBJ_ELF.
* config/m68k-parse.y (yylex): Handle @PLTPC, etc.
(motorola_operand): Add rule for `(zapc, EXPR)'.
(do_align): Take new len parameter. Change all callers. Pass it
to md_do_align.
(s_align_bytes): Arg now indicates the length of the fill pattern.
(s_align_ptwo): Likewise.
* config/obj-coff.c (write_object_file): Pass length to
md_do_align.
* config/tc-i386.h (md_do_align): Take new len parameter.
* config/tc-m88k.h (md_do_align): Likewise.
* config/tc-m88k.c (m88k_do_align): Likewise.
* config/tc-sh.h (md_do_align): Likewise.
* config/tc-sh.c (sh_do_align): Likewise.
* doc/as.texinfo: Document new pseudo-ops.
* config/obj-coff.c (fixup_mdeps): Divide offset by fr_var, as is
done in cvt_frag_to_fill.
PR 8974.
* app.c (do_scrub_chars): If flag_m68k_mri, don't put a dot in
front of generated pseudo-ops.
* read.c (potable): Ignore "name".
(s_app_file): Permit a single quote after the string, since one
may appear in m68k MRI mode.
(arch_tab): Add HX.
(targ_has_sfr): Handle ARCH_HX.
(targ_has_iclass): Handle ARCH_HX.
(tc_coff_fix2rtype): Add return 0 to avoid warning.
(tc_headers_hook): If the architecture was specified explicitly,
use it when setting the flags. Set the extern variable coff_flags
rather than headers->filehdr.f_flags, since the latter is set
unconditionally in obj-coff.c.
(i960_handle_align): Remove unused variable fixp.
patches from Alan Modra <alan@spri.levels.unisa.edu.au>:
* configure.in: Set OPCODES and BFD to search directories.
Substitute OPCODES_DEP and BFDDEP. On SunOS, set HLDFLAGS.
* configure: Rebuild.
* Makefile.in (LDFLAGS, HLDFLAGS): New variables.
(LIBDEPS): New variable.
(as.new0: Depend upon $(LIBDEPS) rather than $(LIBS). Use
$(HLDFLAGS) in link.
(check): Set LD_LIBRARY_PATH in the environment.
than comparing S_GET_SEGMENT to undefined_section.
(write_object_file): Skip symbols which were equated to an
undefined or common symbol.
* symbols.c (resolve_symbol_value): Use S_IS_DEFINED and
S_IS_COMMON rather than comparing S_GET_SEGMENT to
undefined_section.
(S_GET_VALUE): Likewise. Avoid recursion problems if S_IS_DEFINED
or S_IS_COMMON call S_GET_VALUE.
* config/obj-aout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
* config/obj-aout.c (obj_emit_relocations): If a reloc is equated
to an undefined or common symbol, convert the reloc to be against
the target symbol.
(obj_crawl_symbol_chain): Skip symbols which were equated to an
undefined or common symbol.
* config/obj-bout.h (S_IS_COMMON): Define if not BFD_ASSEMBLER.
* config/obj-bout.c (obj_emit_relocations): If a reloc is equated
to an undefined or common symbol, convert the reloc to be against
the target symbol.
(obj_crawl_symbol_chain): Skip symbols which were equated to an
undefined or common symbol.
* config/obj-coff.c (do_relocs_for): Use S_IS_DEFINED and
S_IS_COMMON rather than comparing S_GET_SEGMENT to
undefined_section.
(yank_symbols): Skip symbols which were equated to an undefined or
common symbol.
* configure.in (m68*-apple-aux*): New target.
* config/te-aux.h: New file.
* config/obj-coff.c (compare_external_relocs): New static function
if TE_AUX.
(do_relocs_for): Sort relocs if TE_AUX.
(fixup_segment): If TE_AUX, store common symbol value in segment.
* config/tc-m68k.h (TARGET_FORMAT): Define if TE_AUX.
BSF_FUNCTION.
(s_cpload): Set BSF_OBJECT for _gp_disp symbol.
* read.c (s_lcomm): If S_SET_SIZE is defined, set the size of the
symbol.
* ecoff.c (add_procedure): Set the BSF_FUNCTION flag.
(ecoff_build_symbols): If S_SET_SIZE is defined, set the size of
an undefined symbol and the size of a function symbol.
* config/obj-elf.c (elf_frob_symbol): If TC_MIPS, set BSF_OBJECT
for all common symbols.
(add_ecoff_symbol): Add addend argument. Change all callers.
(coff_sym_value): Make static.
(coff_sym_addend): New static variable.
(ecoff_directive_def): Initialize coff_sym_addend.
(ecoff_directive_val): Accept symbol + constant.
(ecoff_directive_endef): Pass coff_sym_addend to add_ecoff_symbol.
(ecoff_build_symbols): Include the addend in the symbol value.
(md_begin): Initialize it. Rewrite warn_on_bump handling.
(sparc_ip): If no architecture or -bump specified, don't mark as
mismatched those in default_compatible.
* configure.in (i386-*-sco*elf*): Use fmt elf, targ sco5.
* configure: Rebuild.
* config/sco5.mt: New file; set TDEFINES to -DSCO_ELF.
* config/tc-i386.c (sco_id): New function, if SCO_ELF.
* config/tc-i386.h (tc_init_after_args): Define if SCO_ELF.
(sco_id): Declare if SCO_ELF.
({max,warn_after}_architecture): New static locals.
(md_begin): Replace NUMOPCODES with sparc_num_opcodes.
If both architecture and -bump requested, set max_architecture to max.
(sparc_md_end): Simplify.
(sparc_ip): Replace references to can_bump_v9_p with max_architecture.
Rewrite code to bump architecture and check for conflicts.
(md_longopts): Recognize -xarch={v8plus,v8plusa} for compatibility
with Solaris assembler.
(md_parse_option): Likewise. Call sparc_opcode_lookup_arch.
(md_show_usage): Update.
undefined symbol, preserve the X_op of O_symbol.
(S_GET_VALUE): Fix check to permit this case.
* write.c (write_relocs): If a reloc is against an undefined
symbol equated to another symbol, change the reloc to be against
the latter symbol.
* config/obj-coff.c (do_relocs_for): Likewise.
If the MRI assembler sees
foo EQU bar
call foo
where bar is not defined, it generates a reloc against bar rather than
against foo. Since the gas documentation does not define this case,
this change makes gas compatible.
* config/tc-mips.c (load_register): Optimise "dli" loads.
(md_show_usage): add "-mcpu=vr4100" to help text.
Provide code to check for either the hi32, or lo32 bits of a 64bit
"dli" constant being 0xffffffff. Also for bit15 of a 16bit constant
being set, so that sign-extension can be used to fill the higher order
bits if required.
(distclean): Use it.
(maintainer-clean): Depend upon clean-here rather than clean,
distclean, and clean-info. Run make maintainer-clean in doc.
Remove files listed in DISTCLEAN_HERE.
* doc/Makefile.in (maintainer-clean realclean): Split out from
distclean. Depend upon clean-info and distclean.
call it.
* config/tc-a29k.h (tc_unrecognized_line): Define.
* config/tc-a29k.c (a29k_unrecognized_line): New function.
(md_operand): Handle a29k style local dollar labels.
table entries, table allocation and control structure are larger now, but
collisions are reduced and string compares even further reduced.
Dump lots more statistics, especially hash code data, for --statistics. Dump
statistics even in error cases.
Details in ChangeLog.
* configure: Update.
* mpw-make.sed: Reorder commands to make sed happier.
* config/te-macos.h: New file.
* config/tc-ppc.h (TARGET_FORMAT): Set correctly for PowerMac.
$extend. Based on code from Eric Freudenthal
<freudenthal@nyu.edu>.
* config/tc-a29k.h (LEX_DOLLAR): Define.
* read.c (LEX_DOLLAR): Define if not defined.
(lex_type): Use LEX_DOLLAR.
set to 1.
* macro.c (get_any_string): Don't keep quotes if macro_strip_at is
set, even if macro_alternate is set.
(get_apost_token): If macro_strip_at, only skip kind if it is '@'.
(sub_actual): If macro_strip_at, and kind is '@', don't look up
the token unless it ended in '@'.
* config/tc-a29k.c (line_separator_chars): Remove '@'.
* doc/c-a29k.texi: Document macro usage on A29K.
(ppc_eb): Likewise. Set the storage class to C_BLOCK, not C_FCN.
(ppc_frob_symbol): Don't change C_BLOCK symbols to C_HIDEXT.
* config/obj-coff.c (coff_frob_symbol): Don't call
SA_SET_SYM_ENDNDX with the current symbol; call it with the next
one. If OBJ_XCOFF, try to figure out whether the symbol is going
to be dropped.
(ppc_stab_symbol): New static variable.
(ppc_change_csect): Check that ppc_toc_csect is not NULL.
(ppc_stabx): Set ppc_stab_symbol around call to symbol_make. Set
sy_tc.real_name to the stab string.
(ppc_bc, ppc_ec): New static functions.
(ppc_canonicalize_symbol_name): If ppc_stab_symbol is set, don't
do anything.
(ppc_symbol_new_hook): If ppc_stab_symbol is set, don't look for a
suffix.
(ppc_csect): Move most of the code to ppc_change_csect, and call
it.
(ppc_change_csect): New static function, taken from ppc_csect.
(ppc_section): New static function.
(ppc_saw_abs): New static varable.
(ppc_frob_symbol): Create aux entry for absolute symbols. Warn if
a symbol has no csect.
(ppc_adjust_symtab): New function.
* config/tc-ppc.h (tc_adjust_symtab): Define if OBJ_XCOFF.
(ppc_adjust_symtab): Declare if OBJ_XCOFF.
(pa_subspace): For ".nsubspa", always create a new subspace
with the given attributes, even if one already exists with the
same name.
So we can put every function into its own $CODE$ subspace.
* frags.c (frags): Variable deleted.
(frag_alloc): New function.
(frag_grow, frag_more, frag_variant, frag_now_fix, frag_append_1_char): Refer
to frchain_now->frch_obstack instead of frags variable.
(frag_new): Ditto. Verify that frch_last and frag_now match on entry and exit,
and that old frag_now has non-zero type. Replace "know" uses with "assert".
Use frag_alloc instead of mucking with obstack alignment.
* frags.h (frags): Declaration deleted.
* subsegs.h (struct frchain): Add new field frch_frag_now.
* subsegs.c (frchains, dummy_frag, absolute_frchain): New static variables.
(subsegs_begin): Initialize frchains obstack. Under gcc, don't give it any
stricter alignment than frchainS structures need. Do not initialize frags
obstack. Set frag_now to point to dummy_obstack. Initialize absolute_frchain.
(subseg_set_rest): Save and restore frag_now in frch_frag_now field of
frchainS. Don't create new frags on section switch, and use frag_alloc when
creating a new frag chain. For absolute section, set frchain_now to
absolute_frchain. Verify that frch_last and frag_now match on entry and exit.
Initialize per-chain obstack, and under gcc, set required alignment to that
needed by fragS structure.
* write.c (chain_frchains_together_1): Verify fr_type is nonzero.
In one test case of Mike's (i386-linux, over 300K lines of .s code with lots
of stabs records), run time and memory use are reduced by about 1/3.
Might introduce some problems in cases that use the frag obstacks in unusual
ways. Test suite does pass for i386-linux and sparc-solaris targets though.
(ppc_biei): Set segment to now_seg and value to coff_n_line_nos.
(ppc_frob_symbol): Handle C_BINCL and C_EINCL symbols by setting
the fix_line field.
* config/obj-coff.c (coff_n_line_nos): Rename from n_line_nos, and
make non-static. Change all users.
* config/obj-coff.h (coff_n_line_nos): Declare.
* configure.in (AC_ARG_WITH(bfd-assembler)): Fix help message.
* config/obj-elf.c (obj_elf_common): Convert specified byte alignment to power
of two. Set size of local bss symbol.
* config/tc-m68k.c (tc_gen_reloc): Fix typo in variable name.
skip characters after the pseudo-op.
(s_else): Likewise.
* read.c (get_line_sb): Don't look past buffer_limit.
(s_include): In MRI mode, skip characters after the file name.
* config/tc-i960.c (md_pseudo_table): Add endian.
(get_args): Don't discard a space between alphanumeric characters.
(get_cdisp): Change text_section to now_seg.
(s_endian): New static function.
* config/tc-i960.h (MRI_MODE_NEEDS_PSEUDO_DOT): Define.
* expr.h (operatorT): Add O_logical_not, O_logical_and, and
O_logical_or.
* expr.c (operand): Treat '!' as logical not operator. If
TC_I960, in MRI mode permit `sizeof secname' and `startof
secname'.
(op_rank): Bump values by 2 to make room for && and ||. Add
entries for !, &&, and ||.
(expr_begin): Only do MRI changes if TC_M68K.
(operator): Recognize || and &&.
(expr): Handle new operatorT values.
* symbols.c (resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
* read.c (potable): Add debug, err, irep, irepc, print, purgem,
and rep.
(read_a_source_file): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
(mri_comment_field): Only handle weird comments if TC_M68K.
(s_err): New function.
(s_org): Only punt in MRI mode if TC_M68K.
(s_mri_sect): Write TC_I960 version.
(s_print, s_purgem): New functions.
* read.h (s_err, s_print, s_purgem): Declare.
* cond.c (s_ifeqs): Implement.
(ignore_input): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
* macro.c (macro_strip_at): New static variable.
(macro_init): Add strip_at parameter.
(do_formals): If macro_strip_at, change NARG to $NARG.
(define_macro): Skip a comma after the macro name.
(get_apost_token): Skip character if macro_strip_at, even if
macro_mri.
(macro_expand_body): If macro_strip_at, don't recognize parameters
in strings unless they are preceded by an '@'. If macro_strip_at,
pass '@' as strip character to sub_actual. If macro_strip_at,
strip '@' characters.
(macro_expand): If macro_strip_at, change NARG to $NARG.
(delete_macro): New function.
(expand_irp): Skip leading and trailing '"' characters if irpc.
* macro.h (macro_init): Mention new strip_at parameter.
(delete_macro): Declare.
* as.c (main): If TC_I960, pass flag_mri to macro_init as
strip_at; otherwise, pass 0.
* gasp.c (process_pseudo_op): Pass 0 to macro_init as strip_at.
(main): Likewise.
* doc/as.texinfo: Document i960 MRI mode.
* as.c (show_usage): Mention --defsym.
VERSION, move gen of "conf" here from makefile.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-as.r: New file, Mac resource file.
* as.h (inline): Don't decide about defining if __MWERKS__,
remove redundant conditional and definition.
* stabs.c (s_stab_generic): Fix syntax for OBJ_PROCESS_STAB.
Change OBJ_COFF checks to check OBJ_XCOFF instead.
(TARGET_FORMAT): Fully parenthesize.
(LEX_QM): Define if TE_PE.
* config/tc-ppc.c: Replace OBJ_COFF by OBJ_XCOFF throughout.
Remove checks of TE_PE within #ifdef OBJ_XCOFF sections.
(init_regtable): Make i unsigned.
(ppc_set_current_section): Rename from setCurrentSection. Change
all callers.
(ppc_arch): Return after as_fatal to avoid gcc warning.
(md_assemble): Only declare reloc if OBJ_ELF. Add default to
switch on fixups[i].reloc to avoid gcc warning.
(IMAGE_SGN_LNK_OTHER): Fix nested comment.
(ppc_pe_function): Don't call ppc_canonicalize_symbol_name.
(ppc_frob_symbol): Remove TE_PE section checks.
(md_estimate_size_before_relax): Return after abort to avoid gcc
warning.
(md_apply_fix3): Add BFD_RELOC_16_GOT_PCREL to switch.
* read.c (LEX_QM): Define as 0 if not defined.
(lex_type): Use LEX_QM for '?'.
* expr.c (expr): Account for new operatorT values in know
expression.
* write.c (fixup_segment): Clear fixp->fx_subsy if the relocation
is fully resolved.
and rightstop to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. Use m68k_ip_op to examine
the operand, not m68k_reg_parse.
(s_mri_if): In MRI mode, stop at the first '*'.
(s_mri_while): Likewise.
(s_mri_else): In MRI mode, ignore trailing characters.
(s_mri_endi, s_mri_break, s_mri_next, s_mri_for): Likewise.
(s_mri_endf, s_mri_repeat, s_mri_until, s_mri_endw): Likewise.
* config/m68k-parse.y: Revert yesterday's change.
* config/m68k-parse.h: Revert yesterday's change.
and rightstart to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. If the left side of the
comparison is a register, and the right side is not, swap the two
sides.
* config/m68k-parse.y (m68k_reg_parse): Make globally visible.
* config/m68k-parse.h (m68k_reg_parse): Declare.
sym-sym case.
* config/obj-coff.c (fixup_segment): Likewise. Permit negative
symbols if TC_M68K.
* config/tc-m68k.c (tc_coff_fix2rtype): If fx_tcbit is set, return
R_RELLONG_NEG.
(tc_gen_reloc): If fx_tcbit is set, abort.
(md_apply_fix_2): For a negative reloc, move fx_subsy to fx_addsy,
and set fx_tcbit.
Permits generating negative relocs for m68k COFF.
(CHECKFLAGS): Remove.
(site.exp): New target.
(check): Rewrite to invoke runtest directly, rather than recurring
down into testsuite.
(clean-here): Remove testsuite directory.
(clean, distclean): Don't recur into testsuite.
* configure.in: Don't call AC_CONFIG_SUBDIRS(testsuite).
* configure: Rebuild.
relaxing, in case md_convert_frag, called by cvt_frag_to_fill,
wants to call fix_new.
* config/tc-m68k.c (m68k_ip): Permit PC relative code if the
segment of the symbol is the current segment, not just in
text_section.
(md_convert_frag_1): Don't call subseg_change.
(md_estimate_size_before_relax): Likewise.
line before preserving a single space. Remove state == 0 test
which will never succeed.
* macro.c (macro_expand_body): Delete local variables from the
formal hash table.
(macro_expand): In MRI mode, stop when whitespace is seen in the
argument list.
* macro.c (ISSEP): Remove duplicated `"' character.
(get_any_string): Copy some characters for which ISSEP is true:
';', '>', '(', ')'. Otherwise we can get in an infinite loop.
* read.c (s_space): In MRI mode, the expressions stop at the first
unquoted space.
(cons_worker): In MRI mode, restore the terminating character at
the end of the function.
* gas/mri/mri.exp: Run it.
* gas/mri/expr.s: Remove whitespace in operand field.
* gas/mri/for.s: Add comments for further testing.
* gas/macros/test2.s: Put in an upper case ELSE to test case
insensitivity.
at newline characters. In MRI mode, always keep spaces in the
operands field. In MRI mode, treat a line comment character as a
regular comment character following a space.
* cond.c (ignore_input): Use strncasecmp rather than strncmp when
looking for special pseudo-ops.
* read.c (cons_worker): In MRI mode, the expressions stop at the
first unquoted space.
(equals): Likewise.
(md_begin): Use 0/1 instead of TRUE/FALSE.
(md_show_usage): Break up long format string for the benefit
of lame compilers.
* config/tc-m68k.c (md_show_usage): Ditto.
* gasp.c (show_usage): Ditto.
* macro.c (check_macro): Cast result of hash_find.
cast the address to a function pointer, not to an integer.
* write.c (fix_new_internal): Call TC_INIT_FIX_DATA if TC_FIX_TYPE is defined.
Don't initialize fx_bsr. Verify that fx_size field is wide enough to hold
stored value.
* write.h (struct fix): Change tc_fix_data to type TC_FIX_TYPE if that is
defined, otherwise omit it. Delete fx_bsr. Change fx_size to unsigned char.
* config/tc-i960.h (TC_FIX_TYPE, fx_bsr, TC_INIT_FIX_DATA): New macros.
* config/tc-ns32k.h (TC_FIX_TYPE, fx_bsr, TC_INIT_FIX_DATA): New macros.
* config/tc-hppa.h (TC_FIX_TYPE): Define as PTR.
* config/tc-i860.c (md_apply_fix): Delete code for checking fx_im_disp, and for
handling non-zero values, since it never gets set after being initialized to
zero.
* write.h (struct fix): Make fx_im_disp always 2 bits, since the only tc-*
files actually using it need that much.
NS32K changes from Ian Dall:
* configure.in: Treat ns32k-pc532-ux* like ns32k-pc532-mach*, and
ns32k-pc532-lites* like ns32k-pc532-netbsd*.
* config/tc-ns32k.h (LOCAL_LABELS_FB): Define to 1.
present only to stop gas complaining when gcc passes through the
"-mcpu=vr4300" switch.
Fri Sep 1 08:20:19 1995 James G. Smith <jsmith@beauty.cygnus.com>
* config/tc-mips.c (md_parse_option, md_begin, md_show_usage):
Add support for "-mcpu=vr4300" as processor identifier.
* config/tc-m68k.c (m68k_ip) [case POST/PRE/BASE]: Fix typo when
looking at outer displacement. Don't set the postindex bit if the
index suppress bit is set (for memory indirect addressing mode).
(scrub_from_file, scrub_to_file): Remove.
(scrub_string, scrub_last_string): Remove.
(scrub_from_string, scrub_to_string): Remove.
(saved_input, saved_input_len): New static variables.
(struct app_saved): Remove scrub_string, scrub_last_string, and
scrub_file fields. Add saved_input and saved_input_len fields.
(app_push): Adjust saved fields for changes in struct app_save.
Initialize state and saved_input.
(app_pop): Adjust saved fields for changes in struct app_save.
(do_scrub_chars): Rename from do_scrub_next_char and rewrite to
process a buffer at a time rather than a character at a time.
(main, as_warn): Remove obsolete testing code.
* as.h (do_scrub_next_char): Don't declare.
(do_scrub_chars): Declare.
(scrub_from_file, scrub_from_string): Don't declare.
(scrub_to_file, scrub_to_string): Don't declare.
* input-file.c (input_file_get): New static function.
(input_file_give_next_buffer): Call do_scrub_chars rather than
do_scrub_next_char.
* read.c (scrub_string, scrub_string_end): New static variables.
(scrub_from_string): New static function.
(read_a_source_file): Call do_scrub_chars rather than
do_scrub_next_char.
(and comment change in input-scrub.c)
statement inside a quotation.
(s_space): Don't warn about a zero repeat count in MRI mode.
* config/tc-m68k.c (crack_operand): In MRI mode, don't count
parentheses inside quotes.
(md_assemble): In MRI mode, anything after the operands field is a
comment.
(parse_mri_control_operand): Adjust start and stop to remove
spaces.
(s_mri_for): Likewise.
* as.c: Include sb.h and macro.h.
(max_macro_next): New global variable.
(main): Call macro_init.
(macro_expr): New static function.
* as.h (max_macro_nest): Declare.
* read.c (line_label): Rename from mri_line_label. Change all
uses.
(potable): Add exitm, irp, irpc, macro, mexit, rept.
(read_a_source_file): Always clear line_label at the start of a
line, not just when flag_mri or LABELS_WITHOUT_COLONS. Fixup
MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
equ val. Set line_label when calling colon. In MRI mode, a
leading '.' does not imply a pseudo-op. Check for macro expansion
before calling md_assemble.
(s_irp): New function.
(get_line_sb): New static function.
(s_macro): New function.
(s_mexit): New function.
(s_rept): New function.
* read.h (line_label): Rename from mri_line_label.
(s_irp, s_rept): Declare.
(s_macro, s_mexit): Declare.
* input-scrub.c: Include sb.h.
(sb_index, from_sb): New static variables.
(macro_nest): New static variable.
(struct input_save): Add sb_index and from_sb fields. Change
next_saved_file field to be struct input_save *.
(next_saved_file): Changed to be struct input_save *.
(input_scrub_push): Change to return type struct input_save *.
Save sb_index and from_sb.
(input_scrub_pop): Change parameter type to struct input_save *.
Restore sb_index and from_sb.
(input_scrub_include_sb): New function.
(input_scrub_next_buffer): Handle reading from from_sb.
(bump_line_counters): Only increment lines if not using from_sb.
* config/tc-m68k.c (opt_table): Add nest.
(opt_nest): New static function.
* gasp.c: Include sb.h and macro.h. Move all sb related functions
and definitions to sb.h and sb.c. Move all macro related
functions and definitions to macro.h and macro.c.
* sb.h, sb.c: New files, extracted from gasp.c.
* macro.h, macro.c: Likewise.
* Makefile.in (OBJS): Add sb.o and macro.o
(GASPOBJS): Define.
(gasp.new): Depend upon $(GASPOBJS). Use $(GASPOBJS) to link.
(TARG_CPU_DEP_m68k): Depend upon subsegs.h.
(gasp.o): Depend upon sb.h and macro.h.
(sb.o): New target.
(macro.o): New target.
(as.o): Depend upon sb.h and macro.h.
(input-scrub.o): Depend upon sb.h.
(read.o): Depend upon sb.h and macro.h.
linecount before printing it.
(process_file): In MRI mode, lines beginning with '*' or '!' are
comments.
(do_reg): In MRI mode, don't require parentheses.
(do_include): In MRI mode, don't requires quotes. If the file can
not be found in the include path, try opening it in the current
directory. Print the file name correctly in the error message.
(chartype_init): In MRI mode, set FIRSTBIT for '.'.
(main): Set comment_char to ';' when entering MRI mode.
(m68k_ip): Pass 64 rather than -1 to add_Fix in 'B' 'B' case.
(md_pcrel_from): If fx_pcrel_adjust is 64, use -1 instead.
You can't portably store negative numbers in a char.
* gas/mri/if.d, gas/mri/if.s: New test.
* gas/mri/repeat.d, gas/mri/repeat.s: New test.
* gas/mri/while.d, gas/mri/while.s: New test.
* gas/mri/mri.exp: Run the new tests.
(do_end): Add parameter. In MRI mode, print it out.
(do_irp): New static function.
(sub_actual): Change parameter m to formal_hash, changing type
from macro_entryh * to hash_table *.
(macro_expand_body): New static function, broken out of
macro_expand.
(macro_expand): Call macro_expand_body.
(K_*): Fully parenthesize.
(K_IRP, K_IRPC): Define.
(mrikinfo): Add IRP and IRPC.
(process_pseudo_op): In MRI mode, print out END pseudo-op. Pass
line to do_end. Handle K_IRP and K_IRPC.
"begin_brtab" and "end_brtab" pseudo-ops.
(pa_brtab): New function.
(tc_gen_reloc, SOM version): Handle R_BEGIN_BRTAB and R_END_BRTAB.
(hppa_force_relocation): Force relocations for BRTAB fixups
when OBJ_SOM is defined.
More infrastructure for PA optimziations.
(process_file): Don't warn about missing END in MRI mode.
(do_if): New static function.
(get_mri_string, do_ifc): New static functions.
(buffer_and_nest): Treat MRI mode like alternate syntax mode.
(do_aendr): Change error message in MRI mode.
(do_arepeat): Use REPT/ENDR in MRI mode.
(do_formals): In MRI mode, add special NARG formal.
(macro_expand): Various changes for MRI mode: permit a qualifier
on the macro name; set special NARG formal; permit unnamed
positional arguments; use && to concatenate named parameters;
permit \d to specify an unnamed parameter; permit named parameters
to not start with \; use == to see if a parameter exists.
(getstring): In MRI mode, allow <> to quote a string.
(K_IFEQ, K_IFNE, K_IFLT, K_IFLE, K_IFGE, K_IFGT): Define.
(K_IFC, K_IFNC): Define.
(struct keyword): Name structure used in kinfo array.
(mrikinfo): New static array.
(process_pseudo_op): Don't require leading '.' in MRI mode.
Handle new MRI pseudo-op definitions.
(add_keyword): New static function, broken out of process_init.
(process_init): Use add_keyword. In MRI mode, add mrikinfo table.
(long_options): Add "mri".
(show_usage): Mention -M/--mri.
(main): Call process_init after processing arguments. Handle -M.
* doc/gasp.texi: Document -M/--mri.
iword rather than expr8 and expr16. When recognizing 'M', use
issbyte rather than expr8. When recognizing 'Q' and 't', just
check for O_constant rather than using expr8.
* config/m68k-parse.h (expr8, expr16): Don't define.
* Makefile.in (m68k-parse.o): Depend upon m68k-parse.h, not
m68k-parse.y.
(m68k_quick): New static variable.
(m68k_rel32): New static variable.
(md_pseudo_table): Add opt and reg.
(m68k_ip): Permit absolute symbols in 'l'/'L' recognition. Check
m68k_quick in 'M' and 'Q' recognition. Check m68k_abspcadd in
DISP handling. Check m68k_rel32 in BASE/POST/PRE handling.
(md_begin): In MRI mode, initialize m68k_abspcadd and m68k_rel32.
In MRI mode, change unsized branch aliases to be variable sized.
(struct opt_action): Define.
(opt_table): Define.
(s_opt): New static function.
(skip_to_comma): New static function.
(opt_chip): New static function.
(opt_list): New static function.
(opt_list_symbols): New static function.
(s_reg): New static function.
* as.h (flag_keep_locals): Change from unsigned char to int.
(flag_no_warnings): Likewise.
(frag_now_fix): In absolute_section, return abs_section_offset.
* subsegs.c (subseg_change): If switching to absolute_section,
just set now_seg and now_subseg.
(subseg_set_rest): Special handling when switching to or from
absolute_section.
(md_pseudo_table): Add fopt and mask2.
(m68k_ip): Use m68k_float_copnum, not COPNUM, when setting
coprocessor register to use. In case 'I' when checking operands,
correct coprocessor register numbers. In case 'I' when setting
operands, don't add 1.
(s_fopt): New static function.
* config/m68k-parse.h (COPNUM): Don't define.
* configure.in: Consistently use ${target_cpu_type} rather than
${cpu_type} after the loop.
* configure: Rebuild.
* Makefile.in (targ-cpu.o): Use @target_cpu_type@ rather than
@cpu_type@.
68ec020, 68ec030, 68ec040, and 68330.
(md_pseudo_table): Add chip and comline.
(m68k_init_after_args): Use strcasecmp when comparing default_cpu
against architectures.
(mri_chip, s_chip): New static functions.
* read.h (mri_comon_symbol): Declare.
(s_mri_common): Declare.
* read.c (mri_line_label): New static variable.
(mri_common_symbol): New global variable.
(potable): Add "common" and "common.s".
(read_a_source_file): In MRI mode, set mri_line_label for a label
at the start of a line.
(s_mri_common): New function.
(s_space): Handle mri_common_symbol.
* symbols.c (colon): Change return value from void to symbolS *,
and return new symbol. If mri_common_symbol is set, attach the
new symbol to it.
(resolve_symbol_value): Handle an sy_mri_common symbol.
* symbols.h (colon): Change return value in declaration.
* subsegs.c (subseg_set_rest): Clear mri_common_symbol.
(subseg_set (both versions)): Likewise.
* frags.c (frag_more): Warn if mri_common_symbol is not NULL.
* write.c (adjust_reloc_syms): Skip sy_mri_common symbols.
(write_object_file): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-coff.c (yank_symbols): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-aout.c (obj_crawl_symbol_chain): Discard
sy_mri_common symbols.
LINKER_RELAXING_SHRINKS_ONLY is defined.
* config/tc-i960.h (LINKER_RELAXING_SHRINKS_ONLY): Define it.
* doc/internals.texi (Relaxation): Write up some stuff on linker relaxing and
LINKER_RELAXING_SHRINKS_ONLY.
