AMD ABM has 2 instructions: popcnt and lzcnt. ABM CPUID feature bit has
been reused for lzcnt and a POPCNT CPUID feature bit is added for popcnt
which used to be the part of SSE4.2. This patch removes CpuABM and adds
CpuPOPCNT. It changes ABM to enable both lzcnt and popcnt, changes SSE4.2
to also enable popcnt.
gas/
* config/tc-i386.c (cpu_arch): Add .popcnt.
* doc/c-i386.texi: Remove abm and .abm. Add popcnt and .popcnt.
Add a tab before @samp{.sse4a}.
opcodes/
* i386-gen.c (cpu_flag_init): Replace CpuABM with
CpuLZCNT|CpuPOPCNT. Add CpuPOPCNT to CPU_SSE4_2_FLAGS. Add
CPU_POPCNT_FLAGS.
(cpu_flags): Remove CpuABM. Add CpuPOPCNT.
* i386-opc.h (CpuABM): Removed.
(CpuPOPCNT): New.
(i386_cpu_flags): Remove cpuabm. Add cpupopcnt.
* i386-opc.tbl: Replace CpuABM|CpuSSE4_2 with CpuPOPCNT on
popcnt. Remove CpuABM from lzcnt.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
There don't really need to be separate Cpu64 and CpuNo64 templates for
these. One small issue with this is that slightly strange code
.intel_syntax noprefix
.code16
.arch i286
.arch .avx
vcvtsi2sd xmm0, xmm0, dword ptr [bx]
vcvtsi2sd xmm0, xmm0, qword ptr [bx]
vcvtsi2sd xmm0, xmm0, ebx
vcvtsi2sd xmm0, xmm0, rbx
now will match in behavior with the AVX512 counterparts in that not
only the 2nd vcvtsi2sd won't assemble, but also the first. The last
two, otoh, will continue to assemble fine (due to the lack of any
memory operand size specifier). As a result, another way to make
things behave more consistently would be to avoid the folding and
add IgnoreSize to the CpuNo64 AVX512 variants. A 3rd way to do so
would be to add Cpu386 to any such insn template.
While doing this also make the usual cosmetic adjustments for the
insns touched anyway. Additionally drop the redundant Cpu64 from
the SAE forms of VCVT{,U}SI2SD - they won't assemble outside of
64-bit mode due to there not being anything to match the Reg64
operand.
There's no need to have separate Cpu64 and CpuNo64 templates: There
already is special logic handling the attribute, and all that's needed
is rejecting 16-bit address registers in 64-bit mode. Suppress suffix
guessing and group all involved logic together, outside of suffix
processing (arguably it doesn't even belong in process_suffix()).
Also, since no AddrPrefixOpReg template permits any suffixes, move the
No_*Suf specifiers for them to a central place. Along with this drop
the no longer relevant NoRex64 from there.
Conversions which shrink element size and which have a memory source
can't be disambiguated between their 128- and 256-bit variants by
looking at the register operand. "operand size mismatch", however, is a
pretty misleading diagnostic. Generalize the logic introduced for
VFPCLASSP{S,D} such that, with suitable similar adjustments to the
respective templates, it'll cover these cases too.
For VCVTNEPS2BF16 also fold the two previously separate AVX512VL
templates to achieve the intended effect. This is then also accompanied
by a respective addition to the inval-avx512f testcase.
Since SSE3 is independent of SSE4a, don't disable SSE3 when disabling
SSE4a.
* i386-gen.c (cpu_flag_init): Remove CPU_ANY_SSE3_FLAGS from
CPU_ANY_SSE4A_FLAGS.
commit 7deea9aad8 changed nosse4 to include CpuSSE4a. But AMD SSE4a is
a superset of SSE3 and Intel SSE4 is a superset of SSSE3. Disable Intel
SSE4 shouldn't disable AMD SSE4a. This patch restores nosse4. It also
adds .sse4a and nosse4a.
gas/
* config/tc-i386.c (cpu_arch): Add .sse4a and nosse4a. Restore
nosse4.
* doc/c-i386.texi: Document sse4a and nosse4a.
opcodes/
* i386-gen.c (cpu_flag_init): Add CPU_ANY_SSE4A_FLAGS. Remove
CPU_ANY_SSE4_FLAGS.
Since movsx and movzx are valid mnemonic in AT&T syntax, remove Intel
syntax comments on movsx and movzx to avoid confusing other readers.
* i386-opc.tbl (movsx): Remove Intel syntax comments.
(movzx): Likewise.
For these to get treatment consistent with other operand size checking
the special logic shouldn't live in md_assemble(), but process_suffix().
And there's more logic involved than simply zapping the suffix.
Note however that MOVS[BW]* and MOVZ[BW]* still won't be fully
consistent, due to the objection to fold MOVS* templates just like was
done for MOVZ* in c07315e0c6 ("x86: allow suffix-less movzw and 64-bit
movzb").
Note further that it is against my own intentions to have MOVSX/MOVZX
silently default to a byte source in AT&T mode. This should happen only
when the destination register is a 16-bit one. In all other cases there
is an ambiguity, and the user should be warned. But it was explicitly
requested for this to be done in a way inconsistent with everything
else.
Note finally that the assembler change points out (and this patch fixes)
a wrong Intel syntax test introduced by bc31405ebb ("x86-64: Properly
encode and decode movsxd"): When source code specifies a 16-bit
destination register, disassembly expectations shouldn't have been to
find a 32-bit one.
With AVX512VL disabled (e.g. when writing code for the Knights family
of processors) these insns aren't ambiguous when used with a memory
source, and hence should be accepted without suffix or operand size
specifier. When AVX512VL is enabled, to be consistent with this as
well as other ambiguous operand size handling it would seem better to
just warn about the ambiguity in AT&T mode, and still default to 512-bit
operands (on the assumption that the code may have been written without
AVX512VL in mind yet), but it was requested to leave AT&T syntax mode
alone here.
Now that the AMD64 check in match_template() applies to 64-bit code
only, the non-64-bit and the Amd64 template can be folded, as being
otherwise compatible with one another. (Oddly enough the same doesn't
apply to CALL, due to the suffixes it permits, while JMP doesn't
allow for any.)
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
Here we implement the custom datapath extensions for MVE.
This required the following changes:
- Adding a new register argument type (that takes either an MVE vector or
a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
types. This required the introduction of new neon shapes to account
for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
new register types.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:
opcodes/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (print_insn_cde): Define 'V' parse character.
(cde_opcodes): Add VCX* instructions.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
Commit d835a58baa disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
More non-bugs flagged by ubsan, unless you happen to be compiling for
a 1's complement host.
cpu/
* frv.cpu (f-u12): Multiply rather than left shift signed values.
(f-label16, f-label24): Likewise.
opcodes/
* frv-ibld.c: Regenerate.
bfcvt converts a .S input to a .H output, so any predicated movprfx
needs to operate on .S rather than .H. In common with SVE2 narrowing
top operations, bfcvtnt doesn't accept movprfx.
2020-01-31 Richard Sandiford <richard.sandiford@arm.com>
opcodes/
* aarch64-tbl.h (aarch64_opcode): Set C_MAX_ELEM for SVE bfcvt.
Remove C_SCAN_MOVPRFX for SVE bfcvtnt.
gas/
* testsuite/gas/aarch64/sve-bfloat-movprfx.s: Use .h rather than
.s for the movprfx.
* testsuite/gas/aarch64/sve-bfloat-movprfx.d: Update accordingly.
* testsuite/gas/aarch64/sve-movprfx_28.d,
* testsuite/gas/aarch64/sve-movprfx_28.l,
* testsuite/gas/aarch64/sve-movprfx_28.s: New test.
More nonsense fixing "bugs" with left shifts of signed values. Yes,
the C standard does say this is undefined (and right shifts of signed
values are implementation defined BTW) but in practice there is no
problem with current machines. 1's complement is a thing of the past.
cpu/
* m32c.cpu (f-src32-rn-unprefixed-QI): Shift before inverting.
(f-src32-rn-prefixed-QI, f-dst32-rn-unprefixed-QI): Likewise.
(f-dst32-rn-prefixed-QI): Likewise.
(f-dsp-32-s32): Mask before shifting left.
(f-dsp-48-u32, f-dsp-48-s32): Likewise.
(f-bitbase32-16-s11-unprefixed): Multiply signed field rather than
shifting left.
(f-bitbase32-24-s11-prefixed, f-bitbase32-24-s19-prefixed): Likewise.
(h-gr-SI): Mask before shifting.
opcodes/
* m32c-ibld.c: Regenerate.
This patch fixes the neg/neg32 BPF instructions, which have K (=0)
instead of X (=1) in their header source bit, despite operating on
registes.
cpu/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf.cpu (define-alu-insn-un): The unary BPF instructions
(neg and neg32) use OP_SRC_K even if they operate only in
registers.
opcodes/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* bpf-opc.c: Regenerate.
gas/ChangeLog:
2020-01-30 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/bpf/alu.d: Update expected opcode for `neg'.
* testsuite/gas/bpf/alu-be.d: Likewise.
* testsuite/gas/bpf/alu32.d: Likewise for `neg32'.
* testsuite/gas/bpf/alu32-be.d: Likewise.
While vendors agree about default operand size (64 bits) and hence
unavilability of a 32-bit form, AMD honors a 16-bit operand size
override (0x66) while Intel doesn't.
- 64-bit CALL permitting just a single operand size doesn't need it.
- FLDENV et al should never have had it.
It remains suspicious that a number of 64-bit only insns continue to
have the attribute, despite this being intended for .code16gcc handling
only.
The patch also fixes a case where libopcodes built for a 64-bit
bfd_vma may print different results to libopcodes built for a 32-bit
bfd_vma.
* tic4x-dis.c (tic4x_dp): Make unsigned.
movsxd is a 64-bit only instruction. It supports both 16-bit and 32-bit
destination registers. Its AT&T mnemonic is movslq which only supports
64-bit destination register. There is also a discrepancy between AMD64
and Intel64 on movsxd with 16-bit destination register. AMD64 supports
32-bit source operand and Intel64 supports 16-bit source operand.
This patch updates movsxd encoding and decoding to alow 16-bit and 32-bit
destination registers. It also handles movsxd with 16-bit destination
register for AMD64 and Intel 64.
gas/
PR binutils/25445
* config/tc-i386.c (check_long_reg): Also convert to QWORD for
movsxd.
* doc/c-i386.texi: Add a node for AMD64 vs. Intel64 ISA
differences. Document movslq and movsxd.
* testsuite/gas/i386/i386.exp: Run PR binutils/25445 tests.
* testsuite/gas/i386/x86-64-movsxd-intel.d: New file.
* testsuite/gas/i386/x86-64-movsxd-intel64-intel.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd-intel64.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.l: Likewise.
* testsuite/gas/i386/x86-64-movsxd-inval.s: Likewise.
* testsuite/gas/i386/x86-64-movsxd.d: Likewise.
* testsuite/gas/i386/x86-64-movsxd.s: Likewise.
opcodes/
PR binutils/25445
* i386-dis.c (MOVSXD_Fixup): New function.
(movsxd_mode): New enum.
(x86_64_table): Use MOVSXD_Fixup and movsxd_mode on movsxd.
(intel_operand_size): Handle movsxd_mode.
(OP_E_register): Likewise.
(OP_G): Likewise.
* i386-opc.tbl: Remove Rex64 and allow 32-bit destination
register on movsxd. Add movsxd with 16-bit destination register
for AMD64 and Intel64 ISAs.
* i386-tbl.h: Regenerated.
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction
overlaps with the possible encoding space for msr. This because msr allows you
to use unallocated encoding space using the general sA_B_cC_cD_E form.
However when an encoding does become allocated then we need to ensure that it's
used as the preferred disassembly. The problem with cfinv is that its mask has
all bits sets because it has no arguments.
This causes issues for the Alias resolver in gas as it uses the mask to build
alias graph. In this case it can't do it since it thinks almost everything
would alias with cfinv. So instead we can only fix this by moving cfinv before
msr.
gas/ChangeLog:
PR 25403
* testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
* testsuite/gas/aarch64/armv8_4-a.s: Likewise.
opcodes/ChangeLog:
PR 25403
* aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv.
* aarch64-asm-2.c: Regenerate
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
Commit b76bc5d54e ("x86: don't default variable shift count insns to
8-bit operand size") pointed out a very bad case, but the underlying
problem is, as mentioned on various occasions, much larger: Silently
selecting a (nowhere documented afaict) certain default operand size
when there's no "sizing" suffix and no suitable register operand(s) is
simply dangerous (for the programmer to make mistakes).
While in Intel syntax mode such mistakes already lead to an error (which
is going to remain that way), AT&T syntax mode now gains warnings in
such cases by default, which can be suppressed or promoted to an error
if so desired by the programmer. Furthermore at least general purpose
insns now consistently have a default applied (alongside the warning
emission), rather than accepting some and refusing others.
No warnings are (as before) to be generated for "DefaultSize" insns as
well as ones acting on selector and other fixed-width values. For
SYSRET, however, the DefaultSize needs to be dropped - it had been
wrongly put there in the first place, as it's unrelated to .code16gcc
(no stack accesses involved).
As set forth as a prereq when I first mentioned this intended change a
few years back, Linux as well as gcc have meanwhile been patched to
avoid (emission of) ambiguous operands (and hence triggering of the new
warning).
Note that I think that in 64-bit mode IRET and far RET would better get
a diagnostic too, as it's reasonably likely that a suffix-less instance
really is meant to be a 64-bit one. But I guess I better make this a
separate follow-on patch.
Note further that floating point operations with integer operands are an
exception for now: They continue to use short (16-bit) operands by
default even in 32- and 64-bit modes.
Finally note that while {,V}PCMPESTR{I,M} would, strictly speaking, also
need to be diagnosed, with their 64-bit forms not being very useful I
think it is better to continue to avoid warning about them (by way of
them carrying IgnoreSize attributes).
Just like other VCVT*{X,Y} templates do, and to allow the programmer
flexibility (might be relevant in particular when heavily macro-izing
code), the two templates should also have Broadcast set, just like their
X/Y-suffix-less counterparts. This in turn requires them to also have
* Dword set on their memory operands, to cover the logic added to
i386gen by 4a1b91eabb ("x86: Expand Broadcast to 3 bits"),
* RegXMM/RegYMM set on their source operands, to satisfy broadcast
sizing logic in gas itself.
Otherwise ATTSyntax templates wouldn't need such operand size attributes.
While extending the test cases, also add Intel syntax broadcast forms
without explicit size specifiers.
This patch moves MVE feature bits into the CORE_HIGH section. This makes sure
.fpu and -mfpu does not reset the bits set by MVE. This is important because
.fpu has no option to "set" these same bits and thus, mimic'ing GCC, we choose
to define MVE as an architecture extension rather than put it together with
other the legacy fpu features.
This will enable the following behavior:
.arch armv8.1-m.main
.arch mve
.fpu fpv5-sp-d16 #does not disable mve.
vadd.i32 q0, q1, q2
This patch also makes sure MVE is not taken into account during auto-detect.
This was already the case, but because we moved the MVE bits to the
architecture feature space we must make sure ARM_ANY does not include MVE.
gas/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* config/tc-arm.c (mve_ext, mve_fp_ext): Use CORE_HIGH.
(armv8_1m_main_ext_table): Use CORE_HIGH for mve.
* testsuite/arm/armv8_1-m-fpu-mve-1.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-1.d: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.s: New.
* testsuite/arm/armv8_1-m-fpu-mve-2.d: New.
include/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm.h (FPU_MVE, FPU_MVE_FPU): Move these features to...
(ARM_EXT2_MVE, ARM_EXT2_MVE_FP): ... the CORE_HIGH space.
(ARM_ANY): Redefine to not include any MVE bits.
(ARM_FEATURE_ALL): Removed.
opcodes/ChangeLog:
2020-01-16 Andre Vieira <andre.simoesdiasvieira@arm.com>
PR 25376
* opcodes/arm-dis.c (coprocessor_opcodes): Use CORE_HIGH for MVE bits.
(neon_opcodes): Likewise.
(select_arm_features): Make sure we enable MVE bits when selecting
armv8.1-m.main. Make sure we do not enable MVE bits when not selecting
any architecture.
The AVX512DQ patterns lacking a Cpu64 attribute made the memory operand
forms accepted even outside of 64-bit mode, and this even without any
{evex} pseudo-prefix (otherwise one could argue that this is an attempt
to follow one possible, albeit somewhat odd, interpretation of the SDM
wording to this effect).
For consistency between the various involved templates drop the
* (now) unnecessary IgnoreSize attributes
* unnecessary (due to VexW1) Size64 attributes from VEX encoded forms
* redundant (with Reg64) Qword operand attributes
uniformly.
tic4x uses a number of static variables for tables that are generated
depending on the current machine (tic4x vs. tic3x). However, it is
possible to change the machine from one invocation of print_insn_tic4x
to the next. This patch throws away the old state if that happens,
and uses a relatively small known size array of register names rather
than a malloc'd table.
* tic4x-dis.c (tic4x_version): Make unsigned long.
(optab, optab_special, registernames): New file scope vars.
(tic4x_print_register): Set up registernames rather than
malloc'd registertable.
(tic4x_disassemble): Delete optable and optable_special. Use
optab and optab_special instead. Throw away old optab,
optab_special and registernames when info->mach changes.
PR 25377
gas * config/tc-z80.c: Add support for half precision, single
precision and double precision floating point values.
* config/tc-z80.h b/gas/config/tc-z80.h: Disable string escapes.
* doc/as.texi: Add new z80 command line options.
* doc/c-z80.texi: Document new z80 command line options.
* testsuite/gas/z80/ez80_pref_dis.s: New test.
* testsuite/gas/z80/ez80_pref_dis.d: New test driver.
* testsuite/gas/z80/z80.exp: Run the new test.
* testsuite/gas/z80/fp_math48.d: Use correct command line option.
* testsuite/gas/z80/fp_zeda32.d: Likewise.
* testsuite/gas/z80/strings.d: Update expected output.
opcodes * z80-dis.c (suffix): Use .db instruction to generate double
prefix.
binutils* objdump.c (visualize_jumps, color_output, extended_color_output)
(detected_jumps): New variables.
(usage): Add the new jump visualization options.
(option_values): Add new option value.
(long_options): Add the new option.
(jump_info_new, jump_info_free): New functions.
(jump_info_min_address, jump_info_max_address): Likewise.
(jump_info_end_address, jump_info_is_start_address): Likewise.
(jump_info_is_end_address, jump_info_size): Likewise.
(jump_info_unlink, jump_info_insert): Likewise.
(jump_info_add_front, jump_info_move_linked): Likewise.
(jump_info_intersect, jump_info_merge): Likewise.
(jump_info_sort, jump_info_visualize_address): Likewise.
(disassemble_jumps): New function - used to locate jumps.
(disassemble_bytes): Add ascii art generation.
(disassemble_section): Add scan to locate jumps.
(main): Parse the new visualization option.
* doc/binutils.texi: Document the new feature.
* NEWS: Mention the new feature.
opcodes * arm-dis.c (print_insn_arm): Fill in insn info fields for control
flow instructions.
(print_insn_thumb16, print_insn_thumb32): Likewise.
(print_insn): Initialize the insn info.
* i386-dis.c (print_insn): Initialize the insn info fields, and
detect jumps.
