binutils-gdb

mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-09 04:21:49 +08:00

Author	SHA1	Message	Date
Tom Tromey	0e90c44162	Constify target_pid_to_exec_file This changes target_pid_to_exec_file and target_ops::pid_to_exec_file to return a "const char *". I couldn't build many of these targets, but did examine the code by hand -- also, as this only affects the return type, it's normally pretty safe. This brings gdb and gdbserver a bit closer, and allows for the removal of a const_cast as well.	2022-05-13 08:21:16 -06:00
Tom Tromey	cd1c3a4544	Use gdb_printf and gdb_vprintf in more places Luis pointed out that I missed a spot in the gdb_printf conversion -- namely aarch64-nat.c. While looking at this, I found another spot in darwin-nat.c that I also missed. I can't build either of these, but I think this patch should fix the problems.	2022-03-30 09:32:18 -06:00
Tom Tromey	6cb06a8cda	Unify gdb printf functions Now that filtered and unfiltered output can be treated identically, we can unify the printf family of functions. This is done under the name "gdb_printf". Most of this patch was written by script.	2022-03-29 12:46:24 -06:00
Dominique Quatravaux	7ff917016a	gdb/darwin: skip over WIFSTOPPED wait4 status On modern Darwin's, there appears to be a new circumstance in which a MACH_NOTIFY_DEAD_NAME message can be received, and which was not previously accounted for: to signal the WIFSTOPPED condition in the debuggee. In that case the debuggee is not dead yet (and in fact, counting it as dead would cause a zombie leak - A process in such a state reparents to PID 1, but cannot be killed). - Read and ignore such messages (counting on the next exception message to let us know of the inferior's new state again) - Refactor logging so as to clearly distinguish between the MACH_NOTIFY_DEAD_NAME cases (WIFEXITED, WIFSTOPPED, signal, or something else), and warn in the last case Co-authored-by: Louis-He <1726110778@qq.com> Co-authored-by: Philippe Blain <levraiphilippeblain@gmail.com> Change-Id: Ie86904a894e9bd154e6b674b1bfbfbaee7fde3e1	2022-02-24 10:48:37 -05:00
Dominique Quatravaux	9cca177bae	gdb/darwin: remove not-so-harmless spurious call to `wait4` As seen in https://sourceware.org/bugzilla/show_bug.cgi?id=24069 this code will typically wait4() a second time on the same process that was already wait4()'d a few lines above. While this used to be harmless/idempotent (when we assumed that the process already exited), this now causes a deadlock in the WIFSTOPPED case. The early (~2019) history of bug #24069 cautiously suggests to use WNOHANG instead of outright deleting the call. However, tests on the current version of Darwin (Big Sur) demonstrate that gdb runs just fine without a redundant call to wait4(), as would be expected. Notwithstanding the debatable value of conserving bug compatibility with an OS release that is more than a decade old, there is scant evidence of what that double-wait4() was supposed to achieve in the first place - A cursory investigation with `git blame` pinpoints commits `bb00b29d78` and `a80b95ba67` from the 2008-2009 era, but fails to answer the "why" question conclusively. Co-Authored-By: Philippe Blain <levraiphilippeblain@gmail.com> Change-Id: Id4e4415d66d6ff6b3552b60d761693f17015e4a0	2022-02-19 11:02:22 -05:00
Tom Tromey	a42a74331c	Reduce use of unfiltered output in Darwin code The Darwin code uses unfiltered output liberally. This patch changes this code to send some output to gdb_stdlog (in some cases via the use of debug_prefixed_printf_cond_nofunc), or to gdb_stderr, or to simply switch to filtered output. Note that I didn't switch inferior_debug to use debug_prefixed_printf_cond_nofunc, because that would affect the output by removing the information about the inferior. I wasn't sure if this was important or not, so I left it in. v2 of this patch uses warning rather than prints to gdb_stderr, and removes some trailing whitespace. I can't compile this patch, so it's "best effort".	2022-01-09 18:59:52 -07:00
Tom Tromey	bc521517b7	Introduce target_announce_attach This introduces target_announce_attach, by analog with target_announce_detach. Then it converts existing targets to use this, rather than emitting their own output by hand.	2022-01-06 08:56:20 -07:00
Joel Brobecker	4a94e36819	Automatic Copyright Year update after running gdb/copyright.py This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.	2022-01-01 19:13:23 +04:00
Simon Marchi	183be22290	gdb, gdbserver: make target_waitstatus safe I stumbled on a bug caused by the fact that a code path read target_waitstatus::value::sig (expecting it to contain a gdb_signal value) while target_waitstatus::kind was TARGET_WAITKIND_FORKED. This meant that the active union field was in fact target_waitstatus::value::related_pid, and contained a ptid. The read signal value was therefore garbage, and that caused GDB to crash soon after. Or, since that GDB was built with ubsan, this nice error message: /home/simark/src/binutils-gdb/gdb/linux-nat.c:1271:12: runtime error: load of value 2686365, which is not a valid value for type 'gdb_signal' Despite being a large-ish change, I think it would be nice to make target_waitstatus safe against that kind of bug. As already done elsewhere (e.g. dynamic_prop), validate that the type of value read from the union matches what is supposed to be the active field. - Make the kind and value of target_waitstatus private. - Make the kind initialized to TARGET_WAITKIND_IGNORE on target_waitstatus construction. This is what most users appear to do explicitly. - Add setters, one for each kind. Each setter takes as a parameter the data associated to that kind, if any. This makes it impossible to forget to attach the associated data. - Add getters, one for each associated data type. Each getter validates that the data type fetched by the user matches the wait status kind. - Change "integer" to "exit_status", "related_pid" to "child_ptid", just because that's more precise terminology. - Fix all users. That last point is semi-mechanical. There are a lot of obvious changes, but some less obvious ones. For example, it's not possible to set the kind at some point and the associated data later, as some users did. But in any case, the intent of the code should not change in this patch. This was tested on x86-64 Linux (unix, native-gdbserver and native-extended-gdbserver boards). It was built-tested on x86-64 FreeBSD, NetBSD, MinGW and macOS. The rest of the changes to native files was done as a best effort. If I forgot any place to update in these files, it should be easy to fix (unless the change happens to reveal an actual bug). Change-Id: I0ae967df1ff6e28de78abbe3ac9b4b2ff4ad03b7	2021-10-21 16:13:56 -04:00
Simon Marchi	2fed9db40b	gdbsupport: make gdb_mkostemp_cloexec return a scoped_fd This encourages the callers to use automatic file descriptor management. Change-Id: I137a81df6f3607b457e28c35aafde8ed6f3a3344	2021-09-30 15:21:48 -04:00
Simon Marchi	13084383e8	gdbsupport: make gdb_open_cloexec return scoped_fd Make gdb_open_cloexec return a scoped_fd, to encourage using automatic management of the file descriptor closing. Except in the most trivial cases, I changed the callers to just release the fd, which retains their existing behavior. That will allow the transition to using scoped_fd more to go gradually, one caller at a time. Change-Id: Ife022b403f96e71d5ebb4f1056ef6251b30fe554	2021-09-30 15:21:48 -04:00
Simon Marchi	b5572c42cc	gdb: fix darwin-nat build (again) I made a mistake in the previous patch. Adjust the format string to match the arguments. Change-Id: I4d45e0e0adb78eb3b5a06ba1a5287155940056ba	2021-09-28 19:50:30 -04:00
Simon Marchi	8c12140439	gdb: fix darwin-nat build There are two errors of this kind: CXX darwin-nat.o /Users/smarchi/src/binutils-gdb/gdb/darwin-nat.c:1175:19: error: format specifies type 'unsigned long' but the argument has type 'ULONGEST' (aka 'unsigned long long') [-Werror,-Wformat] ptid.pid (), ptid.tid ()); ^~~~~~~~~~~ Fix them by using ptid_t's to_string method. Change-Id: I52087d5f7ee0fc01ac8b3f87d4db0217cb0d7cc7	2021-09-28 19:47:44 -04:00
Tom Tromey	c80e29dba9	Change get_ada_task_ptid parameter type get_ada_task_ptid currently takes a 'long' as its 'thread' parameter type. However, on some platforms this is actually a pointer, and using 'long' can sometimes end up with the value being sign-extended. This sign extension can cause problems later, if the tid is then later used as an address again. This patch changes the parameter type to ULONGEST and updates all the uses. This approach preserves sign extension on the targets where it is apparently intended, while avoiding it on others. Co-Authored-By: John Baldwin <jhb@FreeBSD.org>	2021-09-23 09:30:54 -06:00
Dominique Quatravaux	83a559f7b9	Remove unused variable un darwin_nat_target::resume gdb/ChangeLog: * darwin-nat.c (darwin_nat_target::resume): Remove status variable. Change-Id: Ibcbdd6641a12252840c7dea9f388f4f8ce265e3d	2021-04-08 15:22:49 -04:00
Simon Marchi	c8fbd44a01	gdb: remove target_is_pushed free function Same principle as the previous patches. gdb/ChangeLog: * target.h (target_is_pushed): Remove, update callers to use inferior::target_is_pushed instead. * target.c (target_is_pushed): Remove. Change-Id: I9862e6205acc65672da807cbe4b46cde009e7b9d	2021-03-23 09:50:36 -04:00
Simon Marchi	02980c5645	gdb: remove push_target free functions Same as the previous patch, but for the push_target functions. The implementation of the move variant is moved to a new overload of inferior::push_target. gdb/ChangeLog: * target.h (push_target): Remove, update callers to use inferior::push_target. * target.c (push_target): Remove. * inferior.h (class inferior) <push_target>: New overload. Change-Id: I5a95496666278b8f3965e5e8aecb76f54a97c185	2021-03-23 09:50:35 -04:00
Joel Brobecker	3666a04883	Update copyright year range in all GDB files This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.	2021-01-01 12:12:21 +04:00
Simon Marchi	dda83cd783	gdb, gdbserver, gdbsupport: fix leading space vs tabs issues Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695	2020-11-02 10:28:45 -05:00
Tom Tromey	b60cea74de	Make target_wait options use enum flags This changes TARGET_WNOHANG to be a member of an enum, rather than a define, and also adds a DEF_ENUM_FLAGS_TYPE for this type. Then, it changes target_wait and the various target wait methods to use this type rather than "int". This didn't catch any bugs, but it seems like a decent cleanup nevertheless. I did not change deprecated_target_wait_hook, since that's only used out-of-tree (by Insight), and there didn't seem to be a need. I can't build some of these targets, so I modified them on a best-effort basis. I don't think this patch should go in before the release branch is made. gdb/ChangeLog 2020-09-18 Tom Tromey <tromey@adacore.com> * windows-nat.c (struct windows_nat_target) <wait>: Update. (windows_nat_target::wait): Update. * target/wait.h (enum target_wait_flag): New. Use DEF_ENUM_FLAGS_TYPE. * target/target.h (target_wait): Change type of options. * target.h (target_options_to_string, default_target_wait): Update. (struct target_ops) <wait>: Change type of options. * target.c (target_wait, default_target_wait, do_option): Change type of "options". (target_options_to_string): Likewise. * target-delegates.c: Rebuild. * target-debug.h (target_debug_print_target_wait_flags): Rename from target_debug_print_options. * sol-thread.c (class sol_thread_target) <wait>: Update. (sol_thread_target::wait): Update. * rs6000-nat.c (class rs6000_nat_target) <wait>: Update. (rs6000_nat_target::wait): Update. * remote.c (class remote_target) <wait, wait_ns, wait_as>: Update. (remote_target::wait_ns, remote_target::wait_as): Change type of "options". (remote_target::wait): Update. * remote-sim.c (struct gdbsim_target) <wait>: Update. (gdbsim_target::wait): Update. * record-full.c (class record_full_base_target) <wait>: Update. (record_full_wait_1): Change type of "options". (record_full_base_target::wait): Update. * record-btrace.c (class record_btrace_target) <wait>: Update. (record_btrace_target::wait): Update. * ravenscar-thread.c (struct ravenscar_thread_target) <wait>: Update. (ravenscar_thread_target::wait): Update. * procfs.c (class procfs_target) <wait>: Update. (procfs_target::wait): Update. * obsd-nat.h (class obsd_nat_target) <wait>: Update. * obsd-nat.c (obsd_nat_target::wait): Update. * nto-procfs.c (struct nto_procfs_target) <wait>: Update. (nto_procfs_target::wait): Update. * nbsd-nat.h (struct nbsd_nat_target) <wait>: Update. * nbsd-nat.c (nbsd_wait): Change type of "options". (nbsd_nat_target::wait): Update. * linux-thread-db.c (class thread_db_target) <wait>: Update. (thread_db_target::wait): Update. * linux-nat.h (class linux_nat_target) <wait>: Update. * linux-nat.c (linux_nat_target::wait): Update. (linux_nat_wait_1): Update. * infrun.c (do_target_wait_1, do_target_wait): Change type of "options". * inf-ptrace.h (struct inf_ptrace_target) <wait>: Update. * inf-ptrace.c (inf_ptrace_target::wait): Update. * go32-nat.c (struct go32_nat_target) <wait>: Update. (go32_nat_target::wait): Update. * gnu-nat.h (struct gnu_nat_target) <wait>: Update. * gnu-nat.c (gnu_nat_target::wait): Update. * fbsd-nat.h (class fbsd_nat_target) <wait>: Update. * fbsd-nat.c (fbsd_nat_target::wait): Update. * darwin-nat.h (class darwin_nat_target) <wait>: Update. * darwin-nat.c (darwin_nat_target::wait): Update. * bsd-uthread.c (struct bsd_uthread_target) <wait>: Update. (bsd_uthread_target::wait): Update. * aix-thread.c (class aix_thread_target) <wait>: Update. (aix_thread_target::wait): Update. gdbserver/ChangeLog 2020-09-18 Tom Tromey <tromey@adacore.com> * netbsd-low.h (class netbsd_process_target) <wait>: Update. * netbsd-low.cc (netbsd_waitpid, netbsd_wait) (netbsd_process_target::wait): Change type of target_options. * win32-low.h (class win32_process_target) <wait>: Update. * win32-low.cc (win32_process_target::wait): Update. * target.h (class process_stratum_target) <wait>: Update. (mywait): Update. * target.cc (mywait, target_wait): Change type of "options". * linux-low.h (class linux_process_target) <wait, wait_1>: Update. * linux-low.cc (linux_process_target::wait) (linux_process_target::wait_1): Update.	2020-09-18 14:20:44 -06:00
Pedro Alves	fe7d6a8db0	Don't write to inferior_ptid in darwin-nat.c Untested. gdb/ChangeLog: 2020-06-18 Pedro Alves <palves@redhat.com> * darwin-nat.c (darwin_nat_target::decode_message): Don't write to inferior_ptid. (darwin_nat_target::stop_inferior, darwin_nat_target::kill): Avoid inferior_ptid. (darwin_attach_pid): Use switch_to_no_thread instead of writing to inferior_ptid directly. (darwin_nat_target::init_thread_list): Switch to thread, instead of writing to inferior_ptid. (darwin_nat_target::attach): Don't write to inferior_ptid. (darwin_nat_target::get_ada_task_ptid): Avoid inferior_ptid.	2020-06-18 23:11:57 +01:00
Tom Tromey	740480b88a	Remove iterate_over_inferiors The last caller of iterate_over_inferiors is darwin-nat.c. This patch removes the calls from this file, and then remove iterate_over_inferiors. In general I think "external iteration" is to be preferred in gdb, the main benefit being that the code is easier to read. I rebuilt this on Darwin. I seem to only have access to Darwin systems where gdb does not yet work :-(, so I can't run the test suite. gdb/ChangeLog 2020-04-23 Tom Tromey <tom@tromey.com> * inferior.h (iterate_over_inferiors): Don't declare. * inferior.c (iterate_over_inferiors): Remove. * darwin-nat.c (find_inferior_task_it, find_inferior_pid_it): Remove. (darwin_find_inferior_by_task, darwin_find_inferior_by_pid): Don't use iterate_over_inferiors. (darwin_resume_inferior_it) (struct resume_inferior_threads_param) (darwin_resume_inferior_threads_it): Remove. (darwin_nat_target::resume): Don't use iterate_over_inferiors. Change-Id: Ib2fdf2c98e40f13156ff869ed3173d5f1fdae7ea	2020-04-23 06:26:31 -06:00
Simon Marchi	ab53f38262	gdb: fix variable shadowing error in darwin-nat.c We encounter this error when building on macOS with GCC. CXX darwin-nat.o /src-local/binutils-gdb/gdb/darwin-nat.c: In member function 'ptid_t darwin_nat_target::wait_1(ptid_t, target_waitstatus)': /src-local/binutils-gdb/gdb/darwin-nat.c:1264:18: error: declaration of 'inf' shadows a previous local [-Werror=shadow=compatible-local] for (inferior inf : all_inferiors (this)) ^~~ /src-local/binutils-gdb/gdb/darwin-nat.c:1205:20: note: shadowed declaration is here struct inferior inf; ^~~ Fix it by moving the declaration of `inf` in the specific scopes that need it. I think it's clearer this way anyway, as it shows that it's not the same `inf` that is used in these different scopes. Thanks to Iain Sandoe for reporting this. I did not see this error at first, because I compile with the default system compiler on macOS, which is clang. The compiler flag we try to enable for this is `-Wshadow=local`, which is not one recognized by clang. I checked to see if there would a version of the -Wshadow warnings [1] we could enable for clang, that would catch this, but the only one that would is `-Wshadow` itself, and this is too invasive for us (which is why we enabled just -Wshadow=local in the first place). [1] https://clang.llvm.org/docs/DiagnosticsReference.html#wshadow gdb/ChangeLog: * darwin-nat.c (darwin_nat_target::wait_1): Move `inf` declaration to narrower scopes.	2020-01-23 17:44:22 -05:00
Simon Marchi	e7eee665a1	gdb: fix darwin-nat.c build / adapt to multi-target The darwin-nat.c file doesn't build since the multi-target changes (`5b6d1e4f`, "Multi-target support"). This patch makes it build. I have access to a macOS vm, so I am able to build it, but I wasn't able to successfully codesign it and try to actually debug something, so I don't know if it works. I don't have much more time to put on this to figure it out, so I thought I'd sent the patch anyway, as it's at least a step in the right direction. The bulk of the patch is to change a bunch of functions to be methods of the darwin_nat_target object, so that this can pass `this` to find_inferior_ptid and other functions that now require a process_stratum_target pointer. The darwin_ptrace_him function (renamed to darwin_nat_target::ptrace_him in this patch) is passed to fork_inferior as the `init_trace_fun` parameter. Since the method can't be passed as a plain function pointer (we need the `this` pointer), I changed the `init_trace_fun` parameter of fork_inferior to be a gdb::function_view, so we can pass a lambda and capture `this`. The changes in darwin-nat.h are only to move definition higher in the file, so that forward declarations are not needed. gdb/ChangeLog: * darwin-nat.h (struct darwin_exception_msg, enum darwin_msg_state, struct darwin_thread_info, darwin_thread_t): Move up. (class darwin_nat_target) <wait_1, check_new_threads, decode_exception_message, decode_message, stop_inferior, init_thread_list, ptrace_him, cancel_breakpoint>: Declare. * darwin-nat.c (darwin_check_new_threads): Rename to... (darwin_nat_target::check_new_threads): ... this. (darwin_suspend_inferior_it): Remove. (darwin_decode_exception_message): Rename to... (darwin_nat_target::decode_exception_message): ... this. (darwin_nat_target::resume): Pass target to find_inferior_ptid. (darwin_decode_message): Rename to... (darwin_nat_target::decode_message): ... this. (cancel_breakpoint): Rename to... (darwin_nat_target::cancel_breakpoint): ... this. (darwin_wait): Rename to... (darwin_nat_target::wait_1): ... this. Use range-based for loop instead of iterate_over_inferiors. (darwin_nat_target::wait): Call wait_1 instead of darwin_wait. (darwin_stop_inferior): Rename to... (darwin_nat_target::stop_inferior): ... this. (darwin_nat_target::kill): Call wait_1 instead of darwin_wait. (darwin_init_thread_list): Rename to... (darwin_nat_target::init_thread_list): ... this. (darwin_ptrace_him): Rename to... (darwin_nat_target::ptrace_him): ... this. (darwin_nat_target::create_inferior): Pass lambda function to fork_inferior. (darwin_nat_target::detach): Call stop_inferior instead of darwin_stop_inferior. * fork-inferior.h (fork_inferior): Change init_trace_fun parameter to gdb::function_view. * fork-inferior.c (fork_inferior): Likewise.	2020-01-23 14:55:50 -05:00
Simon Marchi	6c2659886f	gdb: add back declarations for _initialize functions I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit `481695ed5f` Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9	2020-01-13 14:01:38 -05:00
Joel Brobecker	b811d2c292	Update copyright year range in all GDB files. gdb/ChangeLog: Update copyright year range in all GDB files.	2020-01-01 10:20:53 +04:00
Tom Tromey	d9fa87f4f6	Constify get_exec_file I noticed that get_exec_file could return a "const char ". This patch implements this change. I couldn't build all the code -- but I did build Linux native and a mingw cross. Consequently, the NTO code has a hack, where it casts away const. I think this can be removed, but that required more work there, and since I couldn't compile it, I felt it best not to try. Let me know what you think. gdb/ChangeLog 2019-12-16 Tom Tromey <tromey@adacore.com> windows-nat.c (windows_nat_target::attach): Update. * remote.c (extended_remote_target::attach): Update. * procfs.c (procfs_target::attach): Update. * nto-procfs.c (nto_procfs_target::attach): Update. (nto_procfs_target::create_inferior): Update. * inf-ptrace.c (inf_ptrace_target::attach): Update. * gnu-nat.c (gnu_nat_target::attach): Update. (gnu_nat_target::detach): Update. * darwin-nat.c (darwin_nat_target::attach): Update. * corefile.c (get_exec_file): Constify result. Remove extraneous return. * bsd-kvm.c (bsd_kvm_target_open): Update. * gdbsupport/common-inferior.h (get_exec_file): Constify result. gdb/gdbserver/ChangeLog 2019-12-16 Tom Tromey <tromey@adacore.com> * server.c (get_exec_file): Constify result. Change-Id: I29c60f7313a7def0dcb290ff0c2a4c1dea4f981f	2019-12-16 14:08:11 -07:00
Wataru Ashihara	b1f0c0b90b	gdb/darwin-nat.c: Fix template argument for scoped_restore_tmpl This should be the type of startup_with_shell, whose type was changed from int to bool at commit `80fd28264`. This fixes the build on macOS: CXX darwin-nat.o In file included from ../../gdb/darwin-nat.c:22: In file included from ../../gdb/top.h:25: In file included from ../../gdb/value.h:23: In file included from ../../gdb/frame.h:72: In file included from ../../gdb/language.h:26: In file included from ../../gdb/symtab.h:33: ../../gdb/gdbsupport/gdb_optional.h:155:19: error: no matching constructor for initialization of 'scoped_restore_tmpl<int>' new (&m_item) T (std::forward<Args>(args)...); ^ ~~~~~~~~~~~~~~~~~~~~~~~~ ../../gdb/darwin-nat.c:1995:31: note: in instantiation of function template specialization 'gdb::optional<scoped_restore_tmpl<int> >::emplace<bool , int>' requested here restore_startup_with_shell.emplace (&startup_with_shell, 0); ^ ../../gdb/gdbsupport/scoped_restore.h:69:3: note: candidate constructor template not viable: no known conversion from 'bool ' to 'int ' for 1st argument scoped_restore_tmpl (T var, T2 value) ^ ../../gdb/gdbsupport/scoped_restore.h:57:3: note: candidate constructor not viable: requires single argument 'var', but 2 arguments were provided scoped_restore_tmpl (T var) ^ ../../gdb/gdbsupport/scoped_restore.h:76:3: note: candidate constructor not viable: requires single argument 'other', but 2 arguments were provided scoped_restore_tmpl (const scoped_restore_tmpl<T> &other) ^ 1 error generated. gdb/ChangeLog 2019-12-08 Wataru Ashihara <wataash@wataash.com> darwin-nat.c (darwin_nat_target::create_inferior): Fix template argument for scoped_restore_tmpl from bool to int. Change-Id: Ia0202efd34dbce69b6af5d035fa55ed89215138a	2019-12-09 08:02:00 -05:00
Tom de Vries	85102364b2	[gdb] Fix more typos in comments Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4	2019-10-18 02:48:08 +02:00
Christian Biesinger	491144b5e2	Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool. cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int. (get_setshow_command_value_string): Likewise. cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool. compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool. python/python.c (gdbpy_parameter_value): Cast to bool* instead of int. ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool. (thread_apply_all_command): Update. (print_thread_events): Change to bool. top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.	2019-09-18 09:35:12 +09:00
Tom Tromey	b1c896b365	Fix gdb build on macOS Internal testing showed that the macOS port did not build. The breakage was caused by the patch to remove the gdbarch.h include from defs.h. This patch fixes the problem. gdb/ChangeLog 2019-08-14 Tom Tromey <tromey@adacore.com> * darwin-nat.c: Include gdbarch.h. * darwin-nat-info.c: Include gdbarch.h.	2019-08-14 08:40:18 -06:00
Tom Tromey	268a13a5a3	Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.	2019-07-09 07:45:38 -06:00
Tom Tromey	86108c1311	Remove shadowing from darwin-nat.c Building on Darwin with gcc showed that darwin-nat.c had some shadowing variable declarations. This removes them. gdb/ChangeLog 2019-06-11 Tom Tromey <tromey@adacore.com> * darwin-nat.c (darwin_decode_exception_message) (darwin_decode_message, darwin_nat_target::kill): Fix shadowing.	2019-06-11 05:37:47 -06:00
Tom Tromey	61c9c4212d	Fix darwin-nat.c build John Marshall pointed out that darwin-nat.c fails to build: CXX darwin-nat.o ../../../binutils-gdb/gdb/darwin-nat.c:1709:8: error: must use 'class' tag to refer to type 'thread_info' in this scope for (thread_info it : all_threads ()) /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.14.sdk/usr/include/mach/thread_act.h:240:15: note: class 'thread_info' is hidden by a non-type declaration of 'thread_info' here kern_return_t thread_info Mach has a thread_info() function declared in that header, which darwin-nat.c #includes. This patch fixes the problem by reintroducing the struct keyword. gdb/ChangeLog 2019-05-16 Tom Tromey <tromey@adacore.com> darwin-nat.c (thread_info_from_private_thread_info): Add struct keyword to foreach.	2019-05-16 10:46:59 -06:00
Tom Tromey	bde09ab702	Remove "struct" from foreach statements Some versions of gcc have a bug that causes for (struct mumble : something) ... to give a compiler error. We routinely work around this bug in gdb, but apparently had not done so in a while. This patch fixes the remaining known cases of this problem. gdb/ChangeLog 2019-05-03 Sandra Loosemore <sandra@codesourcery.com> Tom Tromey <tom@tromey.com> * dictionary.c (collate_pending_symbols_by_language): Remove "struct" from foreach. * symtab.c (lookup_global_symbol_from_objfile) (lookup_symbol_in_objfile_from_linkage_name): Remove "struct" from foreach. * ser-tcp.c (net_open): Remove "struct" from foreach. * objfiles.c (objfile_relocate, objfile_rebase) (objfile_has_symbols): Remove "struct" from foreach. * minsyms.c (lookup_minimal_symbol_by_pc_section): Remove "struct" from foreach. * dwarf2read.c (handle_struct_member_die): Remove "struct" from foreach. * darwin-nat.c (thread_info_from_private_thread_info): Remove "struct" from foreach. * ada-lang.c (create_excep_cond_exprs) (ada_exception_catchpoint_cond_string): Remove "struct" from foreach.	2019-05-03 18:06:37 -06:00
Tom Tromey	eedc3f4f0a	Replace throw_exception with throw in some cases This replaces throw_exception with "throw;" when possible. This was written by script. The rule that is followed is that uses of the form: catch (... &name) { ... throw_exception (name); } ... can be rewritten. This should always be safe, because exceptions are caught by const reference, and therefore can't be modified in the body of the catch. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * valops.c (value_rtti_indirect_type): Replace throw_exception with throw. * tracefile-tfile.c (tfile_target_open): Replace throw_exception with throw. * thread.c (thr_try_catch_cmd): Replace throw_exception with throw. * target.c (target_translate_tls_address): Replace throw_exception with throw. * stack.c (frame_apply_command_count): Replace throw_exception with throw. * solib-spu.c (append_ocl_sos): Replace throw_exception with throw. * s390-tdep.c (s390_frame_unwind_cache): Replace throw_exception with throw. * rs6000-tdep.c (rs6000_frame_cache) (rs6000_epilogue_frame_cache): Replace throw_exception with throw. * remote.c: Replace throw_exception with throw. * record-full.c (record_full_message, record_full_wait_1) (record_full_restore): Replace throw_exception with throw. * record-btrace.c: (get_thread_current_frame_id, record_btrace_start_replaying) (cmd_record_btrace_bts_start, cmd_record_btrace_pt_start) (cmd_record_btrace_start): Replace throw_exception with throw. * parse.c (parse_exp_in_context_1): Replace throw_exception with throw. * linux-nat.c (detach_one_lwp, linux_resume_one_lwp) (resume_stopped_resumed_lwps): Replace throw_exception with throw. * linespec.c: (find_linespec_symbols): Replace throw_exception with throw. * infrun.c (displaced_step_prepare, resume): Replace throw_exception with throw. * infcmd.c (post_create_inferior): Replace throw_exception with throw. * inf-loop.c (inferior_event_handler): Replace throw_exception with throw. * i386-tdep.c (i386_frame_cache, i386_epilogue_frame_cache) (i386_sigtramp_frame_cache): Replace throw_exception with throw. * frame.c (frame_unwind_pc, get_prev_frame_if_no_cycle) (get_prev_frame_always, get_frame_pc_if_available) (get_frame_address_in_block_if_available, get_frame_language): Replace throw_exception with throw. * frame-unwind.c (frame_unwind_try_unwinder): Replace throw_exception with throw. * eval.c (fetch_subexp_value, evaluate_var_value) (evaluate_funcall, evaluate_subexp_standard): Replace throw_exception with throw. * dwarf2loc.c (call_site_find_chain) (dwarf2_evaluate_loc_desc_full, dwarf2_locexpr_baton_eval): Replace throw_exception with throw. * dwarf2-frame.c (dwarf2_frame_cache): Replace throw_exception with throw. * darwin-nat.c (darwin_attach_pid): Replace throw_exception with throw. * cp-abi.c (baseclass_offset): Replace throw_exception with throw. * completer.c (complete_line_internal): Replace throw_exception with throw. * compile/compile-object-run.c (compile_object_run): Replace throw_exception with throw. * cli/cli-script.c (process_next_line): Replace throw_exception with throw. * btrace.c (btrace_compute_ftrace_pt, btrace_compute_ftrace) (btrace_enable, btrace_maint_update_pt_packets): Replace throw_exception with throw. * breakpoint.c (create_breakpoint, save_breakpoints): Replace throw_exception with throw. * break-catch-throw.c (re_set_exception_catchpoint): Replace throw_exception with throw. * amd64-tdep.c (amd64_frame_cache, amd64_sigtramp_frame_cache) (amd64_epilogue_frame_cache): Replace throw_exception with throw. * aarch64-tdep.c (aarch64_make_prologue_cache) (aarch64_make_stub_cache): Replace throw_exception with throw. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * linux-low.c (linux_detach_one_lwp): Replace throw_exception with throw. (linux_resume_one_lwp): Likewise.	2019-04-08 09:05:41 -06:00
Tom Tromey	230d2906b9	Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.	2019-04-08 09:05:40 -06:00
Tom Tromey	a70b814420	Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.	2019-04-08 09:05:39 -06:00
Tom Tromey	3d6e9d2336	Make exceptions use std::string and be self-managing This changes the exception's "message" member to be a shared_ptr wrapping a std::string. This allows removing the stack of exception messages, because now exceptions will self-destruct when needed. This also adds a noexcept copy constructor and operator= to gdb_exception, plus a "what" method. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c (gdb_xml_parser::parse): Update. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * value.c (show_convenience): Update. * unittests/cli-utils-selftests.c (test_number_or_range_parser) (test_parse_flags_qcs): Update. * thread.c (thr_try_catch_cmd): Update. * target.c (target_translate_tls_address): Update. * stack.c (print_frame_arg, read_frame_local, read_frame_arg) (info_frame_command_core, frame_apply_command_count): Update. * rust-exp.y (rust_lex_exception_test): Update. * riscv-tdep.c (riscv_print_one_register_info): Update. * remote.c (remote_target::enable_btrace): Update. * record-btrace.c (record_btrace_enable_warn): Update. * python/py-utils.c (gdbpy_convert_exception): Update. * printcmd.c (do_one_display, print_variable_and_value): Update. * mi/mi-main.c (mi_print_exception): Update. * mi/mi-interp.c (mi_cmd_interpreter_exec): Use SCOPE_EXIT. * mi/mi-cmd-stack.c (list_arg_or_local): Update. * linux-nat.c (linux_nat_target::attach): Update. * linux-fork.c (class scoped_switch_fork_info): Update. * infrun.c (displaced_step_prepare): Update. * infcall.c (call_function_by_hand_dummy): Update. * guile/scm-exception.c (gdbscm_scm_from_gdb_exception): Update. * gnu-v3-abi.c (print_one_vtable): Update. * frame.c (get_prev_frame_always): Update. * f-valprint.c (info_common_command_for_block): Update. * exec.c (try_open_exec_file): Update. * exceptions.c (print_exception, exception_print) (exception_fprintf, exception_print_same): Update. * dwarf2-frame.c (dwarf2_build_frame_info): Update. * dwarf-index-cache.c (index_cache::store) (index_cache::lookup_gdb_index): Update. * darwin-nat.c (maybe_cache_shell): Update. * cp-valprint.c (cp_print_value_fields): Update. * compile/compile-cplus-symbols.c (gcc_cplus_convert_symbol) (gcc_cplus_symbol_address): Update. * compile/compile-c-symbols.c (gcc_convert_symbol) (gcc_symbol_address, generate_c_for_for_one_variable): Update. * common/selftest.c: Update. * common/common-exceptions.h (struct gdb_exception) <message>: Now a std::string. (exception_try_scope_entry, exception_try_scope_exit): Don't declare. (struct exception_try_scope): Remove. (TRY): Don't use exception_try_scope. (struct gdb_exception): Add constructor, operator=. <what>: New method. (struct gdb_exception_RETURN_MASK_ALL) (struct gdb_exception_RETURN_MASK_ERROR) (struct gdb_exception_RETURN_MASK_QUIT): Add constructor. (struct gdb_quit_bad_alloc): Update. * common/common-exceptions.c (exception_none): Change initializer. (struct catcher) <state, exception>: Initialize inline. <prev>: Remove member. (current_catcher): Remove. (catchers): New global. (exceptions_state_mc_init): Simplify. (catcher_pop): Remove. (exceptions_state_mc, exceptions_state_mc_catch): Update. (try_scope_depth, exception_try_scope_entry) (exception_try_scope_exit): Remove. (throw_exception_sjlj): Update. (exception_messages, exception_messages_size): Remove. (throw_it): Simplify. (gdb_exception_sliced_copy): Remove. (throw_exception_cxx): Update. * cli/cli-script.c (script_from_file): Update. * breakpoint.c (insert_bp_location, update_breakpoint_locations): Update. * ada-valprint.c (ada_val_print): Update. * ada-lang.c (ada_to_fixed_type_1, ada_exception_name_addr) (create_excep_cond_exprs): Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c (handle_btrace_general_set, handle_qxfer_btrace) (handle_qxfer_btrace_conf, detach_or_kill_for_exit_cleanup) (captured_main, main): Update. * gdbreplay.c (main): Update.	2019-04-08 09:05:38 -06:00
Tom Tromey	4de283e4b5	Revert the header-sorting patch Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.	2019-04-06 13:47:34 -06:00
Tom Tromey	d55e5aa6b2	Sort includes for files gdb/[a-f].[chyl]. This patch sorts the include files for the files [a-f].[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers.	2019-04-05 19:09:35 -06:00
Tom Tromey	a068643d69	Change pid_to_str to return std::string Currently the target pid_to_str method returns a const char , so many implementations have a static buffer that they update. This patch changes these methods to return a std::string instead. I think this is cleaner and avoids possible gotchas when calling pid_to_str on different ptids in a single statement. (Though no such calls exist currently.) This also updates various helper functions, and the gdbarch pid_to_str methods. I also made a best effort to fix all the callers, but I can't build some of the -nat.c files. Tested by the buildbot. gdb/ChangeLog 2019-03-13 Tom Tromey <tromey@adacore.com> * i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers) (i386_gnu_nat_target::store_registers): Update. * target-debug.h (target_debug_print_std_string): New macro. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * windows-tdep.c (display_one_tib): Update. * tui/tui-stack.c (tui_make_status_line): Update. * top.c (print_inferior_quit_action): Update. * thread.c (thr_try_catch_cmd): Update. (add_thread_with_info): Update. (thread_target_id_str): Update. (thr_try_catch_cmd): Update. (thread_command): Update. (thread_find_command): Update. * record-btrace.c (record_btrace_target::info_record) (record_btrace_resume_thread, record_btrace_target::resume) (record_btrace_cancel_resume, record_btrace_step_thread) (record_btrace_target::wait, record_btrace_target::wait) (record_btrace_target::wait, record_btrace_target::stop): Update. * progspace.c (print_program_space): Update. * process-stratum-target.c (process_stratum_target::thread_address_space): Update. * linux-fork.c (linux_fork_mourn_inferior) (detach_checkpoint_command, info_checkpoints_command) (linux_fork_context): Update. (linux_fork_detach): Update. (class scoped_switch_fork_info): Update. (delete_checkpoint_command): Update. * infrun.c (follow_fork_inferior): Update. (follow_fork_inferior): Update. (proceed_after_vfork_done): Update. (handle_vfork_child_exec_or_exit): Update. (follow_exec): Update. (displaced_step_prepare_throw): Update. (displaced_step_restore): Update. (start_step_over): Update. (resume_1): Update. (clear_proceed_status_thread): Update. (proceed): Update. (print_target_wait_results): Update. (do_target_wait): Update. (context_switch): Update. (stop_all_threads): Update. (restart_threads): Update. (finish_step_over): Update. (handle_signal_stop): Update. (switch_back_to_stepped_thread): Update. (keep_going_pass_signal): Update. (print_exited_reason): Update. (normal_stop): Update. * inferior.c (inferior_pid_to_str): Change return type. (print_selected_inferior): Update. (add_inferior): Update. (detach_inferior): Update. * dummy-frame.c (fprint_dummy_frames): Update. * dcache.c (dcache_info_1): Update. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Update. * linux-tdep.c (linux_core_pid_to_str): Change return type. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return type. * fbsd-tdep.c (fbsd_core_pid_to_str): Change return type. * sol2-tdep.h (sol2_core_pid_to_str): Change return type. * sol2-tdep.c (sol2_core_pid_to_str): Change return type. * gdbarch.c, gdbarch.h: Rebuild. * gdbarch.sh (core_pid_to_str): Change return type. * windows-nat.c (struct windows_nat_target) <pid_to_str>: Change return type. (windows_nat_target::pid_to_str): Change return type. (windows_delete_thread): Update. (windows_nat_target::attach): Update. (windows_nat_target::files_info): Update. * target-delegates.c: Rebuild. * sol-thread.c (class sol_thread_target) <pid_to_str>: Change return type. (sol_thread_target::pid_to_str): Change return type. * remote.c (class remote_target) <pid_to_str>: Change return type. (remote_target::pid_to_str): Change return type. (extended_remote_target::attach, remote_target::remote_stop_ns) (remote_target::remote_notif_remove_queued_reply) (remote_target::push_stop_reply, remote_target::disable_btrace): Update. (extended_remote_target::attach): Update. * remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return type. (gdbsim_target::pid_to_str): Change return type. * ravenscar-thread.c (struct ravenscar_thread_target) <pid_to_str>: Change return type. (ravenscar_thread_target::pid_to_str): Change return type. * procfs.c (class procfs_target) <pid_to_str>: Change return type. (procfs_target::pid_to_str): Change return type. (procfs_target::attach): Update. (procfs_target::detach): Update. (procfs_target::fetch_registers): Update. (procfs_target::store_registers): Update. (procfs_target::wait): Update. (procfs_target::files_info): Update. * obsd-nat.c (obsd_nat_target::pid_to_str): Change return type. * nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change return type. (nto_procfs_target::pid_to_str): Change return type. (nto_procfs_target::files_info, nto_procfs_target::attach): Update. * linux-thread-db.c (class thread_db_target) <pid_to_str>: Change return type. * linux-nat.c (linux_nat_target::pid_to_str): Change return type. (exit_lwp): Update. (attach_proc_task_lwp_callback, get_detach_signal) (detach_one_lwp, resume_lwp, linux_nat_target::resume) (linux_nat_target::resume, wait_lwp, stop_callback) (maybe_clear_ignore_sigint, stop_wait_callback, status_callback) (save_stop_reason, select_event_lwp, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps) (linux_nat_target::wait, linux_nat_stop_lwp): Update. * inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return type. (inf_ptrace_target::attach): Update. (inf_ptrace_target::files_info): Update. * go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return type. (go32_nat_target::pid_to_str): Change return type. * gnu-nat.c (gnu_nat_target::pid_to_str): Change return type. (gnu_nat_target::wait): Update. (gnu_nat_target::wait): Update. (gnu_nat_target::resume): Update. * fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type. (fbsd_nat_target::wait): Update. * darwin-nat.c (darwin_nat_target::pid_to_str): Change return type. (darwin_nat_target::attach): Update. * corelow.c (class core_target) <pid_to_str>: Change return type. (core_target::pid_to_str): Change return type. * target.c (normal_pid_to_str): Change return type. (default_pid_to_str): Likewise. (target_pid_to_str): Change return type. (target_translate_tls_address): Update. (target_announce_detach): Update. * bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change return type. (bsd_uthread_target::pid_to_str): Change return type. * bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return type. (bsd_kvm_target::pid_to_str): Change return type. * aix-thread.c (class aix_thread_target) <pid_to_str>: Change return type. (aix_thread_target::pid_to_str): Change return type. * target.h (struct target_ops) <pid_to_str>: Change return type. (target_pid_to_str, normal_pid_to_str): Likewise. * obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return type. * linux-nat.h (class linux_nat_target) <pid_to_str>: Change return type. * inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change return type. * gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return type. * fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return type. * darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change return type.	2019-03-13 13:50:13 -06:00
Tom Tromey	c119e04082	Remove excess calls to gdb_flush A customer noticed some mildly odd MI output, where CLI output was split into multiple MI strings at unusual boundaries, like this: ~"$1 = (b => true" ~", p => 0x407260" This is technically correct according to the MI spec, but still unusual, in that there's no particular reason for the string to be split where it is. I tracked this down to a call to gdb_flush in generic_val_print. Then, I went through all calls to gdb_flush and removed the ones I thought were superfluous. In particular: * Any call in the value-printing code; * Likewise the type-printing code (just a single call); and * Any call that immediately followed a printf that obviously ended with a newline, my belief being that gdb's standard output streams are line buffered (by inheriting the behavior from stdio) Regression tested on x86-64 Fedora 29. I didn't add a new test case. I tend to think we don't necessarily want to specify this behavior in the tests. Let me know what you think of this. gdb/ChangeLog 2019-03-05 Tom Tromey <tromey@adacore.com> * windows-nat.c (windows_nat_target::attach) (windows_nat_target::detach): Don't call gdb_flush. * valprint.c (generic_val_print, val_print, val_print_string): Don't call gdb_flush. * utils.c (defaulted_query): Don't call gdb_flush. * typeprint.c (print_type_scalar): Don't call gdb_flush. * target.c (target_announce_detach): Don't call gdb_flush. * sparc64-tdep.c (adi_print_versions): Don't call gdb_flush. * remote.c (extended_remote_target::attach): Don't call gdb_flush. * procfs.c (procfs_target::detach): Don't call gdb_flush. * printcmd.c (do_examine): Don't call gdb_flush. (info_display_command): Don't call gdb_flush. * p-valprint.c (pascal_val_print): Don't call gdb_flush. * nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush. * memattr.c (info_mem_command): Don't call gdb_flush. * mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush. * m2-valprint.c (m2_val_print): Don't call gdb_flush. * infrun.c (follow_exec, handle_command): Don't call gdb_flush. * inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush. * hppa-tdep.c (unwind_command): Don't call gdb_flush. * gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush. (gnu_nat_target::detach): Don't call gdb_flush. * f-valprint.c (f_val_print): Don't call gdb_flush. * darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush. * cli/cli-script.c (read_command_lines): Don't call gdb_flush. * cli/cli-cmds.c (shell_escape, print_disassembly): Don't call gdb_flush. * c-valprint.c (c_val_print): Don't call gdb_flush. * ada-valprint.c (ada_print_scalar): Don't call gdb_flush.	2019-03-05 08:55:51 -07:00
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	2019-01-01 10:01:51 +04:00
Pedro Alves	0803633106	Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info tp : all_threads ()) { .... } // all non-exited threads. for (thread_info tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops " parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior , ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().	2018-11-22 16:13:23 +00:00
Tom Tromey	b50a8b9a91	Cache a copy of the user's shell on macOS Recent versions of macOS have a feature called System Integrity Protection. Among other things, This feature prevents ptrace from tracing certain programs --- for example, the programs in /bin, which includes typical shells. This means that startup-with-shell does not work properly. This is PR cli/23364. Currently there is a workaround in gdb to disable startup-with-shell when this feature might be in use. This patch changes gdb to be a bit more precise about when startup-with-shell will not work, by checking whether the shell executable is restricted. If the shell is restricted, then this patch will also cause gdb to cache a copy of the shell in the gdb cache directory, and then reset the SHELL environment variable to point to this copy. This lets startup-with-shell work again. Tested on High Sierra by trying to start a program using redirection, and by running startup-with-shell.exp. gdb/ChangeLog 2018-10-27 Tom Tromey <tom@tromey.com> PR cli/23364: * darwin-nat.c (copied_shell): New global. (may_have_sip): Rename from should_disable_startup_with_shell. (copy_shell_to_cache, maybe_cache_shell): New functions. (darwin_nat_target::create_inferior): Update. Use copied_shell.	2018-10-27 11:58:41 -06:00
Pedro Alves	dd20378271	Darwin: Remove unused variables [-Werror=unused-variable] Building GDB with --host=x86_64-apple-darwin15 using G++ 5.3.0 runs into a number of -Werror=unused-variable warnings/errors: ../../src/gdb/i386-darwin-nat.c: In function 'void i386_darwin_dr_set(int, CORE_ADDR)': ../../src/gdb/i386-darwin-nat.c:283:7: error: unused variable 'current_pid' [-Werror=unused-variable] int current_pid; ^ [etc, etc.] This commit fixes all such warnings. gdb/ChangeLog: 2018-09-30 Pedro Alves <palves@redhat.com> * darwin-nat-info.c (darwin_debug_regions_recurse) (info_mach_exceptions_command): Remove unused local variables. * darwin-nat.c (darwin_decode_notify_message) (darwin_nat_target::resume, darwin_nat_target::mourn_inferior) (darwin_stop_inferior, darwin_setup_exceptions) (darwin_nat_target::kill, darwin_attach_pid, darwin_ptrace_him) (darwin_nat_target::attach, darwin_nat_target::detach) (darwin_read_write_inferior, darwin_read_dyld_info): Remove unused local variables. * i386-darwin-nat.c (i386_darwin_dr_set): Remove unused local variables.	2018-09-30 17:17:52 +01:00
Xavier Roirand	d6be54ef73	Darwin: set startup-with-shell to off on Sierra and later. On Mac OS X Sierra and later, the shell is not allowed to be debug so add a check and disable startup with shell in that case. This disabling is done temporary before forking inferior and restored after the fork. gdb/ChangeLog: * darwin-nat.c (should_disable_startup_with_shell): New function. (darwin_nat_target::create_inferior): Add call. Change-Id: Ie4d9090f65fdf2e83ecf7a0f9d0647fb1c27cdcc	2018-09-11 15:42:18 +02:00
Xavier Roirand	1584354913	Fix kill issue leading to zombie process on MacOS Sierra Starting with MacOS version Sierra, the gdb kill command seems to work but inferior remains as zombie on the host. Notice that, as zombie process, the inferior is not killable by the user, nor by root. The kill signal gdb sent to the inferior is not handled in gdb as a signal sent by gdb thus no reply is made and the process remains (since MacOS does not "release" the inferior because no reply have been made to the signal message). This patch fixes this problem. gdb/ChangeLog 2018-08-02 Xavier Roirand <roirand@adacore.com> PR gdb/22629: * darwin-nat.c (darwin_kill_inferior): Fix handling of kill inferior.	2018-08-02 15:08:45 -06:00
Tom Tromey	b5bddbbbbc	Check results of get_darwin_inferior I noticed that the existing kill-detach-inferiors-cmd.exp test was causing gdb to crash on macOS 10.13. The bug was that an inferior that hadn't yet been started would cause get_darwin_inferior to return NULL, and this was not checked. I went through the places calling get_darwin_inferior and added checks where appropriate. This makes the test get a bit further. Not all of these spots are exercised by the test, but they seem safe enough in any case. gdb/ChangeLog 2018-08-02 Tom Tromey <tom@tromey.com> * darwin-nat.c (find_inferior_task_it, darwin_find_thread) (darwin_suspend_inferior, darwin_resume_inferior) (darwin_decode_notify_message, darwin_resume_inferior_threads) (darwin_check_new_threads): Check result of get_darwin_inferior.	2018-08-02 15:08:44 -06:00

1 2 3 4

170 Commits