* Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
.word is < -32768 or > 32767. The -J flag causes the error to be
ignored. This is to catch over-sized switches generated by gcc on
systems which don't support the broken .word hack.
as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
write.c (fixup_segment): check for signed .word overflow if
WARN_SIGNED_OVERFLOW_WORD.
* input-scrub.c (input_scrub_push): call input_file_begin, not
input_scrub_begin.
messages.c (as_perror): print ": " between the passed in error and
the strerror, like perror does.
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
* Makefile.in: use gas_target instead of modifying target_cpu.
From Steve Chamberlain:
Makefile.in: Handle m68*-*-coff*.
read.c, read.h: add mult argument to s_space
* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
tc-i960.c (md_ri_to_chars): Always output bout object file in
little endian byte order (used to use endianness of host).
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
data, so that "bc" is available to 68040 cache instructions. Added
"tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than
install_operand.
* tc-m68k.c: use TARGET_CPU to choose default cpu type.
* te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
so that we can assemble hand-written libgcc code.
* messages.c (as_warn): Use fputs, not fprintf, with a buffer that
has already been formatted (but may still contain %-characters).
(as_bad): Likewise.
Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
* tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
written with indirection on the last two operands, which can be
either data or address registers. Added a new operand type 'r'
which accepts either register type. Added '(' to notend stuff in
tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
Tue Aug 18 14:16:38 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: always create installation directories. Removed
MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
FLAGS_TO_PASS to recursive makes.
assembling for an older CPU than a 68020.
This bug was found at Adobe because GAS did not diagnose incorrect
68020 code generated by GCC when compiling for 68010. We had to debug it
in the target system as failing instructions.
processor/opcode mismatch, so reword the error message.
(md_assemble): If no CPU has been set (even if FPU/PMMU
characteristics have been), default to 68020. Don't need extra
quotes around error string.
* configure.in (mips host): Accept "ultrix" with version number.
* expr.c (floating_constant): Separate "=-" to avoid confusing
ancient or broken compilers.
* expr.c (floating_constant): Separate "=-" to avoid confusing
ancient or broken compilers.
* config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
processor/opcode mismatch, so reword the error message.
(md_assemble): If no CPU has been set (even if FPU/PMMU
characteristics have been), default to 68020. Don't need extra
quotes around error string.
(2) structural changes triggered thereby
(3) verify m4 and makeinfo run correctly on all versions of the doc
represented in the Makefile and m4 config definition files
as.texinfo: disabled .lsym
exploit makeinfo node defaulting
removed some conditional hair around nodes
fixed some bad conditionals in a29k config
a29k.m4, i960.m4, sparc.m4, vax.m4: supply missing switch definitions
(looks like these hadn't been tested for a while)
as-all.texinfo: mechanically derived from above
* read.c (potable): align should be nbytes, not ptwo!
* write.c (write_object_file): extra glue for new bss attributes
(relax_segment): SEG_BSS is ok now
* config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
* app.c (process_escape): new function to handle escapes the right
way, (do_scrub_next_char): use new function
* cond.c (s_ifdef): do ifdef/ifndef right
* read.c (s_fill): make the , expressions optional like the doc
says
* config/tc-h8300.[ch]: better warnings
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
* subsegs.c (subseg_change): allow and handle a change into SEG_BSS.
* tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
it into SEG_BSS
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
* expr.c: remove limitation that local_labels_dollar or
local_labels_fb must be < 10.
* symbols.c: remove local_labels_dollar, replace with a function
interface for a sparse array. All users adjusted.
checked in earlier. These are Makefiles relevant to the progressive
release currently in progress.
* added exec_prefix
* default bindir now exec_prefix/bin
* default libdir now exec_prefix/lib
* default mandir now prefix/man
* default infodir now prefix/info
* added oldincludedir, default NULL
* remove all traces of the old -subdirs and -namesubdir support,
including code, for loops, and all subdir/unsubdir stuff.
* remove old style staging targets {de-}stage[1234], comparison,
bootstrapN, from all but the bootstrappable tools.
* added check targets.
* removed any "Last Mod" lines.
* forced copyrights to '92 and shifted some from Cygnus to FSF.
* added tooldir and program_prefix where needed.
* updated texinfo and man pages, removed all references to multiple
hosts or targets.
* expr.c: LOCAL_LABELS_FB had been changed to lower case - so
local labels didn't work.
* listing.c (list_symbol_table): don't core dump when there's no
symbol there.
* write.c, write.h: call fix_new with the right number of args on
the H8.
* config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
errors nicer
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Now compiles for sparc aout, 68k aout (MRI and MIT syntax),
29k coff.
So far works as replacement for sparc and 68k /bin/as.
