PR 22706
* elf32-sh.c (sh_elf_relocate_section): When processing
translation relocs, fail if the relocation offset is too small.
Replace BFD_ASSERTs with more helpful error messages.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
This adds support for ".localentry 1", a new st_other
STO_PPC64_LOCAL_MASK encoding that signifies a function with a single
entry point like ".localentry 0", but unlike a ".localentry 0"
function does not preserve r2.
include/
* elf/ppc64.h: Specify byte offset to local entry for values
of two to six in STO_PPC64_LOCAL_MASK. Clarify r2 return
value for such functions when entering via global entry point.
Specify meaning of a value of one in STO_PPC64_LOCAL_MASK.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Use a ppc_stub_long_branch_r2off
for calls to symbols with STO_PPC64_LOCAL_MASK bits set to 1.
gas/
* config/tc-ppc.c (ppc_elf_localentry): Allow .localentry values
of 1 and 7 to directly set value into STO_PPC64_LOCAL_MASK bits.
ld/testsuite/
* ld-powerpc/elfv2.s: Add .localentry f5,1 testcase.
* ld-powerpc/elfv2exe.d: Update.
* ld-powerpc/elfv2so.d: Update.
One of the ill effects of ld -r is to mash together sections. That
can result in reduced icache performance at runtime due to unexpected
movement of code. Another problem is that sections can become too
large to link on targets that have limited relative addressing. ld -r
--relax attempts to overcome the large section problem for branches by
inserting trampolines, but the powerpc support added lots of
unnecessary trampolines. This patch trims them somewhat.
bfd/
* elf32-ppc.c (ppc_elf_relax_section): Ignore common or undef locals.
Avoid trashing toff with added when used as a symbol index.
Ignore R_PPC_PLTREL24 addends in unused example code. Avoid
creating unnecessary fixups when relocatable.
ld/
* testsuite/ld-powerpc/big.s: New file.
* testsuite/ld-powerpc/relaxrl.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new test.
* testsuite/ld-powerpc/relaxr.d: Adjust.
The function elf_xtensa_finish_dynamic_sections checks that sizes of
sections .rela.dyn and .rela.plt match number of corresponding relocation
records, but the check is only done when .rela.plt is non-empty, so, e.g.
it is never run for the static PIE.
Rearrange the test so that .rela.dyn and .rela.plt are checked always.
bfd/
2018-07-23 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (elf_xtensa_finish_dynamic_sections): Move
relocation sections consistency check to always check both
.rela.dyn and .rela.plt when they exist. Rearrange variable
definition and assignment places.
The change c451bb34ae ("xtensa: don't emit dynamic relocation for weak
undefined symbol") didn't properly handle shrinking of relocation
sections due to coalescing of references to a dynamic undefined weak
symbol in a shared object, which resulted in the following assertion
failure in ld when linking uClibc-ng libthread_db for xtensa:
BFD (GNU Binutils) 2.31 internal error, aborting at elf32-xtensa.c:3269
in elf_xtensa_finish_dynamic_sections
Shrink dynamic relocations section for dynamic undefined weak symbols
when linking a shared object.
bfd/
2018-07-23 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (shrink_dynamic_reloc_sections): Shrink dynamic
relocations section for dynamic undefined weak symbols when
linking a shared object.
I built gdb with ubsan and ran the test suite.
One complaint was due to bfd_get_elf_phdrs passing NULL to memcpy.
This patch avoids the complaint.
bfd/ChangeLog
2018-07-23 Tom Tromey <tom@tromey.com>
* elf.c (bfd_get_elf_phdrs): Don't call memcpy with size 0.
Building for S/390 currently fails when using a GCC 8.1 pre-release
version like 8.0.1 (as it is used by F28). Fixed with the attached patch.
bfd/ChangeLog:
2018-07-23 Andreas Krebbel <krebbel@linux.ibm.com>
* elf32-s390.c (elf_s390_write_core_note): Make GCC version 8.0 to
be covered by the check as well.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
On ARM/VxWorks 7, the R_ARM_TARGET2 relocation used for exception handling
is R_ARM_GOT_PREL; moreover in Ada you can define local exceptions. In this
case, you may end up with a GOT relocation against a local symbol in a
non-PIC link and the ARM linker leaves the GOT slot uninitialized, unlike
for example the i386 or the SPARC linkers in the same situation.
bfd/
* elf32-arm.c (elf32_arm_final_link_relocate) <R_ARM_GOT32>: Small
cleanup for the case of a global symbol that binds locally. Also
install a value in the GOT slot in the case of a local symbol in
a non-PIC link.
When -z separate-code, which is enabled by default for Linux/x86, is
used to create executable, ld won't place any data in the code-only
PT_LOAD segment. If there are no data sections placed before the
code-only PT_LOAD segment, the program headers won't be mapped into
any PT_LOAD segment. When the executable tries to access it (based
on the program header address passed in AT_PHDR), it will lead to
segfault. This patch inserts a GNU_PROPERTY_X86_ISA_1_USED note if
there may be no data sections before the text section so that the
first PT_LOAD segment won't be code-only and will contain the program
header.
Testcases are adjusted to either pass "-z noseparate-code" to ld or
discard the .note.gnu.property section. A Linux/x86 run-time test is
added.
bfd/
PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): If the
separate code program header is needed, make sure that the first
read-only PT_LOAD segment has no code by adding a
GNU_PROPERTY_X86_ISA_1_USED note.
ld/
PR ld/23428
* testsuite/ld-elf/linux-x86.S: New file.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/pr23428.c: Likewise.
* testsuite/ld-elf/sec64k.exp: Pass "-z noseparate-code" to ld
for Linux/x86 targets.
* testsuite/ld-i386/abs-iamcu.d: Likewise.
* testsuite/ld-i386/abs.d: Likewise.
* testsuite/ld-i386/pr12718.d: Likewise.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-x86-64/abs-k1om.d: Likewise.
* testsuite/ld-x86-64/abs-l1om.d: Likewise.
* testsuite/ld-x86-64/abs.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-linkonce/zeroeh.ld: Discard .note.gnu.property
section.
* testsuite/ld-scripts/print-memory-usage.t: Likewise.
* testsuite/ld-scripts/size-2.t: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Use ld
to create executable if language is "asm".
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
Fix a crash that occurs in `_bfd_mips_elf_finish_dynamic_sections' if a
dynamic relocation section has been created, but marked to be discarded
by an assignment to the /DISCARD/ output section in a linker script.
In that case the output section is the absolute section, which has no
ELF section data attached, so trying to set its `sh_size' parameter
causes a null pointer dereference.
This is only done as the value for the DT_RELSZ dynamic entry is being
set, so fix the problem by not creating DT_REL, DT_RELSZ or DT_RELENT
dynamic entries in the first place if the dynamic relocation section
will not be output, as with no dynamic relocation data present these
would not serve their purpose anyway.
Add a generic ELF test case to verify that no dynamic relocation data is
reported in the dynamic segment.
bfd/
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Do not
create DT_REL, DT_RELSZ or DT_RELENT dynamic entries if the
dynamic relocation section will be discarded from output.
(_bfd_mips_elf_finish_dynamic_sections) <DT_RELSZ>: Assert that
the dynamic relocation section will be retained in output.
ld/
* testsuite/ld-elf/reloc-discard.d: New test.
* testsuite/ld-elf/reloc-discard.ld: New test linker script.
* testsuite/ld-elf/reloc-discard.s: New test source.
Fix an issue with commit 8602d4fea6 ("Add AIX weak support"),
<https://sourceware.org/ml/binutils/2009-03/msg00189.html>, and use the
correct condition to set the storage class for weak defined symbols.
The context here is as follows:
else if ((h->root.type == bfd_link_hash_defined
|| h->root.type == bfd_link_hash_defweak)
&& h->smclas == XMC_XO)
{
BFD_ASSERT (bfd_is_abs_section (h->root.u.def.section));
isym.n_value = h->root.u.def.value;
isym.n_scnum = N_UNDEF;
if (h->root.type == bfd_link_hash_undefweak
&& C_WEAKEXT == C_AIX_WEAKEXT)
isym.n_sclass = C_WEAKEXT;
else
isym.n_sclass = C_EXT;
aux.x_csect.x_smtyp = XTY_ER;
}
so clearly the inner condition can never be true. Correct the condition
then to check for the `bfd_link_hash_defweak' symbol type instead here,
and in a similar place a little further down in the same function.
bfd/
* xcofflink.c (xcoff_write_global_symbol): Fix symbol type
checks for defined weak symbols.
Currently on S/390 the .got.plt always comes first which prevents the
GNU_RELRO segment from being extended across the non-plt GOT entries.
Just swapping both unfortunately is not that simple since our ABI
requires the _GLOBAL_OFFSET_TABLE_ symbol to point to the very
beginning of the entire GOT. Of the 3 magic GOT entries the first is
accessed via got pointer while second and third are being accessed via
DT_PLTGOT. In order to keep them together we make DT_PLTGOT to point
to the .got instead of .got.plt. However, this violates an assumption
in the dynamic linker prelink undo code about the GOTPLT entries
starting at DT_PLTGOT + 3. We got rid of this requirement with a
Glibc patch already in version 2.24:
https://sourceware.org/ml/libc-alpha/2016-06/msg01302.html
So the S/390 relro GOT layout will look like this with this patch:
+----------------------------------+
|got[0]: DYNAMIC | <--- _GLOBAL_OFFSET_TABLE_ == DT_PLTGOT .got
|got[1]: link_map parm |
|got[2]: &_dl_runtime_resolve |
+----------------------------------+
| | non-plt GOT entries
| |
| |
+----------------------------------+
| | <--- .gotplt, PLT GOT entries
| |
| |
| |
+----------------------------------+
The patch detects the current layout in size_dynamic_section in order
to deal also with linker scripts not generated by this ld version.
With partial relro enabled we pick a linker script where .got and
.got.plt are swapped which then triggers the rest of the logic.
ld/ChangeLog:
2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com>
* emulparams/elf64_s390.sh: Define GENERATE_RELRO_SCRIPT and
SEPARATE_GOTPLT.
* testsuite/ld-s390/gotreloc_64-relro-1.dd: New test.
* testsuite/ld-s390/gotreloc_64-norelro-1.dd: Renamed from ...
* testsuite/ld-s390/gotreloc_64-1.dd: ... this.
* testsuite/ld-s390/s390.exp: Split the GOT testcase into two.
bfd/ChangeLog:
2018-07-18 Andreas Krebbel <krebbel@linux.ibm.com>
* elf-s390-common.c (s390_gotplt_after_got_p): New function.
(s390_got_pointer): New function.
(s390_got_offset): New function.
(s390_gotplt_offset): New function.
* elf64-s390.c (allocate_dynrelocs): Adjust comment.
(elf_s390_size_dynamic_sections): Move space for magic GOT entries
from .got.plt to .got if necessary and pick the right location for
_GLOBAL_OFFSET_TABLE_.
(elf_s390_relocate_section): Use the wrapper functions from
elf-s390-common.c to deal with both possible layouts (either .got
or .got.plt first).
(elf_s390_finish_dynamic_sections): Likewise.
(elf_s390_finish_dynamic_symbol): Make the location of the GOT
magic entries conditional.
Use `bfd_is_abs_symbol' to determine whether a symbol is absolute,
avoiding a problem with ordinary symbols defined in a linker script
outside an output section definition. Such symbols have its owning
section set to the absolute section up to the final link phase. A flag
has been added to the link hash to identify such symbols. Rather than
checking the flag by hand, use the macro that does it uniformly for all
users.
bfd/
* elf32-nds32.c (nds32_elf_relax_loadstore): Use
`bfd_is_abs_symbol' rather than `bfd_is_abs_section' in checking
whether the symbol is absolute.
(nds32_elf_relax_lo12): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Likewise.
(elfNN_aarch64_check_relocs): Likewise.
* xcofflink.c (xcoff_need_ldrel_p): Likewise.
(bfd_xcoff_import_symbol): Likewise.
(xcoff_write_global_symbol): Likewise.
It is usually possible to tell absolute and ordinary symbols apart in
BFD throughout the link, by checking whether the section that owns the
symbol is absolute or not.
That however does not work for ordinary symbols defined in a linker
script outside an output section statement. Initially such symbols are
entered into to the link hash as absolute symbols, owned by the absolute
section. A flag is set in the internal linker expression defining such
symbols to tell the linker to convert them to section-relative ones in
the final phase of the link. That flag is however not accessible to BFD
linker code, including BFD target code in particular.
Add a flag to the link hash then to copy the information held in the
linker expression. Define a macro, `bfd_is_abs_symbol', for BFD code to
use where determining whether a symbol is absolute or ordinary is
required before the final link phase.
This macro will correctly identify the special `__ehdr_start' symbol as
ordinary throughout link, for example, even though early on it will be
assigned to the absolute section. Of course this does not let BFD code
identify what the symbol's ultimate section will be before the final
link phase has converted this symbol (in `update_definedness').
include/
* bfdlink.h (bfd_link_hash_entry): Add `rel_from_abs' member.
bfd/
* linker.c (bfd_is_abs_symbol): New macro.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (exp_fold_tree_1) <etree_assign, etree_provide>
<etree_provided>: Copy expression's `rel_from_abs' flag to the
link hash.
Correct an issue with commit 0f20cc3522 ("TLS support for MIPS"),
<https://sourceware.org/ml/binutils/2005-02/msg00607.html>, where a
condition used to determine whether to use a dynamic symbol for GD, LD
and IE TLS dynamic relocations against a symbol that has been defined
locally has been incorrectly reversed.
It's executables rather than dynamic shared objects where no symbol is
required, because such symbols cannot be preempted and therefore their
values (thread pointer offsets) are fixed at the static link time as is
the associated module ID of the main executable, so the original
condition should have been `shared' instead of `!shared'. This wrong
condition was then later converted from `!shared' to `!bfd_link_pic',
with commit 0e1862bb40 ("Add output_type to bfd_link_info").
Use the correct `bfd_link_dll' condition then, and adjust code for the
dynamic symbol index possibly being -1 as with symbols that have been
forced local, removing unnecessary dynamic relocations from dynamic
regular executables. PIE executables are unaffected as the existing
condition excluded them by chance due to the conversion mentioned above.
Adjust test cases accordingly.
bfd/
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `!bfd_link_pic' in determining the dynamic symbol index.
Avoid the index of -1.
(mips_elf_initialize_tls_slots): Likewise. Flatten code by
moving `dyn' to the beginning of the function block.
ld/
* testsuite/ld-mips-elf/tlsdyn-o32.d: Update test for dynamic
relocation removal.
* testsuite/ld-mips-elf/tlsdyn-o32.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-1.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-2.got: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.d: Likewise.
* testsuite/ld-mips-elf/tlsdyn-o32-3.got: Likewise.
Correct a commit 0e1862bb40 ("Add output_type to bfd_link_info") issue
and use `bfd_link_dll' rather than `bfd_link_pic' in determining whether
to fully resolve GD, LD and IE TLS relocations referring to symbols
locally defined rather than deferring them to the load time by means of
dynamic relocations.
Such symbols cannot be preempted in PIE executables, which are
necessarily PIC, and therefore their values (thread pointer offsets) are
fixed at the static link time as is the associated module ID of the main
executable.
Given the `tlsbin-o32.s' and `tlsdyn-o32.s' sources from our test suite
this removes the absolute TLS relocations from the static:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
and the dynamic:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
1000002c R_MIPS_TLS_TPREL32 *ABS*
10000038 R_MIPS_TLS_DTPMOD32 *ABS*
10000044 R_MIPS_TLS_DTPMOD32 *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
PIE executable respectively, as reported by `objdump -R', and fills the
corresponding GOT slots with the values expected, as recorded with the
test cases added. The new output from `objdump -R' is:
DYNAMIC RELOCATION RECORDS (none)
and:
DYNAMIC RELOCATION RECORDS
OFFSET TYPE VALUE
00000000 R_MIPS_NONE *ABS*
10000030 R_MIPS_TLS_DTPMOD32 tlsvar_gd
10000034 R_MIPS_TLS_DTPREL32 tlsvar_gd
10000040 R_MIPS_TLS_TPREL32 tlsvar_ie
for the static and the dynamic executable respectively.
2018-07-11 Maciej W. Rozycki <macro@mips.com>
Rich Felker <bugdal@aerifal.cx>
bfd/
PR ld/22570
* elfxx-mips.c (mips_tls_got_relocs): Use `bfd_link_dll' rather
than `bfd_link_pic' to determine whether dynamic relocations are
to be produced.
(mips_elf_initialize_tls_slots): Likewise.
ld/
PR ld/22570
* testsuite/ld-mips-elf/tlsbin-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsbin-pie-o32.got: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.d: New test.
* testsuite/ld-mips-elf/tlsdyn-pie-o32.got: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Remove `-Wshadow' compilation errors:
cc1: warnings being treated as errors
.../bfd/elflink.c: In function 'bfd_elf_final_link':
.../bfd/elflink.c:11722: error: declaration of 'remove' shadows a global declaration
/usr/include/stdio.h:154: error: shadowed declaration is here
which for versions of GCC before 4.8 prevent support for ELF targets
from being built. See also GCC PR c/53066.
bfd/
* elflink.c (bfd_elf_final_link): Rename `remove' local variable
to `remove_section'.
elf32-xgate.c contains many functions that are only stubs and
elf32-xgate.h contains unused declarations. While this might be
reasonable for the initial commit of a port with subsequent work
fleshing out the stubs, xgate has only had two minor target specific
patches since the initial commit over six years ago. The rest of the
changes have been general maintenance work applied to all ELF targets,
and some of this work could have been avoided if the stubs hadn't been
there. So this patch removes all the stubs.
I've kept the functionality of the old elf32_xgate_add_symbol_hook,
implemented in elf32_xgate_backend_symbol_processing. Presumably,
that's to set the symbol st_target_internal flag for use in
elf32-m68hc1x.c:elf32_m68hc11_relocate_section.
The empty elf32_xgate_relocate_section meant that xgate had no linker.
Or at least, no linker relocation processing. Deleting the
elf_backend_relocate_section define means the target will now use the
generic linker reloc processing. How good that is will depend on the
accuracy of the reloc howtos..
I haven't updated the ld testsuite to xfail tests expected to fail
for generic elf targets.
bfd/
* elf32-xgate.h: Delete.
* elf32-xgate.c: Delete unnecessary forward declarations, add two
that are now needed.
(xgate_elf_bfd_link_hash_table_create)
(xgate_elf_bfd_link_hash_table_free)
(xgate_elf_set_mach_from_flags, struct xgate_scan_param)
(stub_hash_newfunc, elf32_xgate_add_symbol_hook)
(elf32_xgate_setup_section_lists, elf32_xgate_size_stubs)
(elf32_xgate_build_stubs, elf32_xgate_check_relocs)
(elf32_xgate_relocate_section, _bfd_xgate_elf_set_private_flags)
(elf32_xgate_post_process_headers): Delete.
(elf32_xgate_backend_symbol_processing): New function.
(xgate_elf_ignore_reloc, xgate_elf_special_reloc)
(_bfd_xgate_elf_print_private_bfd_data): Make static.
(ELF_TARGET_ID, elf_info_to_howto, elf_backend_check_relocs)
(elf_backend_relocate_section, elf_backend_object_p)
(elf_backend_final_write_processing, elf_backend_can_gc_sections)
(elf_backend_post_process_headers, elf_backend_add_symbol_hook)
(bfd_elf32_bfd_link_hash_table_create)
(bfd_elf32_bfd_set_private_flags)
(xgate_stub_hash_lookup): Don't define.
(elf_backend_symbol_processing): Define.
* elf-bfd.h (elf_target_id): Delete XGATE_ELF_DATA.
ld/
* emulparams/xgateelf.sh (TEMPLATE_NAME) Set to generic.
(EXTRA_EM_FILE): Set to genelf.
Correct a MIPS/BFD linker issue with dynamic symbol and corresponding
GOT entry values being redirected to lazy binding stubs where the stubs
section has been discarded by assigning to the `/DISCARD/' output
section in the linker script used. The issue manifests itself by the
values entered being relative to the absolute section, which is what any
discarded sections are internally assigned in the linker.
For the `stub-dynsym-2.s' piece of code included as a test case with
this change this issue results in the dynamic symbol table and the GOT
looking like:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 00000010 0 FUNC GLOBAL DEFAULT UND bar
2: 00000000 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 00000010 00000010 FUNC UND bar
0009000c -32740(gp) 00000000 00000000 FUNC UND foo
if assembled to regular MIPS code, or:
Symbol table '.dynsym' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 00000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000d 0 FUNC GLOBAL DEFAULT UND bar
2: 00000001 0 FUNC GLOBAL DEFAULT UND foo
Primary GOT:
Canonical gp value: 00097ff0
Reserved entries:
Address Access Initial Purpose
00090000 -32752(gp) 00000000 Lazy resolver
00090004 -32748(gp) 80000000 Module pointer (GNU extension)
Global entries:
Address Access Initial Sym.Val. Type Ndx Name
00090008 -32744(gp) 0000000d 0000000d FUNC UND bar
0009000c -32740(gp) 00000001 00000001 FUNC UND foo
if assembled to microMIPS code. Symbol values and GOT entries record
the offset into the inexistent stubs section and the ISA bit rather than
zero, which would be the case if a lazy binding stub was not used for
other reasons, such as the value of the symbol being taken for a purpose
other than making a function call (e.g. an R_MIPS_GOT16 relocation).
Correct the issue by refraining from redirecting symbols to lazy binding
stubs if the stubs section is going to be discarded.
bfd/
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol): Don't set
`->needs_lazy_stub' if the stubs output section is the absolute
section.
ld/
* testsuite/ld-mips-elf/stub-dynsym-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.dd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.gd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-2.sd: New test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.dd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.gd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-micromips-insn32-2.sd: New
test.
* testsuite/ld-mips-elf/stub-dynsym-2.ld: New test linker
script.
* testsuite/ld-mips-elf/stub-dynsym-discard-2.ld: New test
linker script.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Use changequote to match "i[3-7]86-*-linux-*", instead of
"i3-786-*-linux-*".
PR ld/23388
* configure.ac: Use changequote for "i[3-7]86-*-linux-*".
* configure: Regenerated.
With config.sub now properly returning m68hc12-unknown-elf rather than
m68hc12-unknown-none, more ELF tests run. This patch enables
STB_GNU_UNIQUE processing fixing some testsuite failures that probably
no m68hc12 user cares about, and removes some XPASSes.
bfd/
* elf32-m68hc1x.c (elf32_m68hc11_post_process_headers): Call
_bfd_elf_post_process_headers.
ld/
* testsuite/ld-discard/extern.d: Remove m68hc12 xfail.
* testsuite/ld-discard/start.d: Likewise.
* testsuite/ld-discard/static.d: Likewise.
