* dwarf2.c (_bfd_dwarf2_find_symbol_bias): Check for a NULL symbol
table pointer.
* coffgen.c (coff_find_nearest_line_with_names): Do not call
_bfd_dwarf2_find_symbol_bias if there is no symbol table available.
https://bugzilla.redhat.com/show_bug.cgi?id=1685727
According to the specification for the CIE entries, when the CIE version is 1 then
the return address register field is always 1 byte. Readelf does this correctly in
read_cie in dwarf.c but ld does this incorrectly and always tries to read a
skip_leb128. If the value here has the top bit set then ld will incorrectly read
at least another byte, causing either an assert failure or an incorrect address to
be used in eh_frame.
I'm not sure how to generate a generic test for this as I'd need to write assembly,
and it's a bit hard to trigger. Essentially the relocated value needs to start with
something that & 0x70 != 0x10 while trying to write a personality.
bfd/ChangeLog:
* elf-eh-frame.c (_bfd_elf_write_section_eh_frame): Correct CIE parse.
Skip symbol defined by linker when checking copy reloc on protected
symbol.
bfd/
PR ld/24276
* elf64-x86-64.c (elf_x86_64_check_relocs): Skip symbol defined
by linker when checking copy reloc on protected symbol.
ld/
PR ld/24276
* testsuite/ld-i386/i386.exp: Run PR ld/24276 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr24276.dso: New file.
* testsuite/ld-i386/pr24276.warn: Likewise.
* testsuite/ld-x86-64/pr24276.dso: Likewise.
* testsuite/ld-x86-64/pr24276.warn: Likewise.
Big section alignment requirements between source and destination of a
long call can result in making call range bigger than what's reachable
by the call opcode. Add biggest section alignment of sections between
the call site and call destination to the call distance when making
long call relaxation decision.
2019-02-20 Eric Tsai <erictsai@cadence.com>
bfd/
* elf32-xtensa.c (is_resolvable_asm_expansion): Scan output
sections between the call site and call destination and adjust
call distance by the largest alignment.
ld/
* testsuite/ld-xtensa/call_overflow.d: New test definition.
* testsuite/ld-xtensa/call_overflow1.s: New test source.
* testsuite/ld-xtensa/call_overflow2.s: New test source.
* testsuite/ld-xtensa/call_overflow3.s: New test source.
* testsuite/ld-xtensa/xtensa.exp: Add call_overflow test.
Used for the AArch64 pointer authentication code mask registers in Arm v8.3-a.
NT_ARM_PAC_MASK matches the value in Linux include/uapi/linux/elf.h
include/ChangeLog:
* elf/common.h (NT_ARM_PAC_MASK): Add define.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_aarch_pauth): Add declaration.
* elf.c (elfcore_grok_aarch_pauth): New function.
(elfcore_grok_note): Check for NT_ARM_PAC_MASK.
(elfcore_write_aarch_pauth): New function.
(elfcore_write_register_note): Check for AArch64 pauth section.
git a31b8bd9a0 introduced a warning (depending on your system
headers).
PR 24225
* elf32-nios2.c (nios2_elf32_relocate_section): Check asprintf
return value.
PR 24236
* archive64.c (_bfd_archive_64_bit_slurp_armap): Move code adding
sentinel NUL to string buffer nearer to loop where it is used.
Don't go past sentinel when scanning strings, and don't write
NUL again.
* archive.c (do_slurp_coff_armap): Simplify string handling to
archive64.c style.
Recent gcc commit b4371b277f1e ("[ARC] Enable init_array support")
inhibits DT_"INIT,FINI} in favor of DT_{INIT,FINI}ARRAY.
Even prior to that, it seems ARC port is the only one with this
special DT_INIT/FINI handling in linker emulation. Removing it
doesn't seem to change any uClibc/glibc testsuite results,
so this can RIP anyways.
bfd/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* elf32-arc.c: Delete init_str, fini_str
ld/
2019-02-01 Vineet Gupta <vgupta@synopsys.com>
* emultempl/arclinux.em : Delete special INIT/FINI handling.
This was always supposed to be an error. Code emitted by gcc for
inline PLT calls assumes PLT is an array of addresses.
* elf32-ppc.c (ppc_elf_relocate_section): Add %X to "unsupported
for bss-plt" warning to make it an error.
This fixes the last ld failures on SPARC64/Linux:
FAIL: Run pr18841 with libpr18841b.so
FAIL: Run pr18841 with libpr18841c.so
FAIL: Run pr18841 with libpr18841bn.so (-z now)
FAIL: Run pr18841 with libpr18841cn.so (-z now)
by mimicing what has been done on x86-64 and Aarch64 to fix the PR.
bfd/
PR ld/18841
* elf32-sparc.c (elf32_sparc_reloc_type_class): Return
reloc_class_ifunc for ifunc symbols.
* elf64-sparc.c (elf64_sparc_reloc_type_class): Likewise.
bfd * config.bfd: Move the powerpc-lynxos and powerpc-windiss targets
into the definitely obsolete list.
binutils * README-how-to-make-a-release: Add a note about updating the
obsolete targets in the bfd/config.bfd file.
commit bd7ab16b45
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Tue Feb 13 07:34:22 2018 -0800
x86-64: Generate branch with PLT32 relocation
removed check R_X86_64_PC32 relocation against protected symbols in
shared objects. Since elf_x86_64_check_relocs is called after we
have seen all input files, we can check for PC-relative relocations in
elf_x86_64_check_relocs. We should not allow PC-relative relocations
against protected symbols since address of protected function and
location of protected data may not be in the shared object.
bfd/
PR ld/24151
* elf64-x86-64.c (elf_x86_64_need_pic): Check
SYMBOL_DEFINED_NON_SHARED_P instead of def_regular.
(elf_x86_64_relocate_section): Move PIC check for PC-relative
relocations to ...
(elf_x86_64_check_relocs): Here.
(elf_x86_64_finish_dynamic_symbol): Use SYMBOL_DEFINED_NON_SHARED_P
to check if a symbol is defined in a non-shared object.
* elfxx-x86.h (SYMBOL_DEFINED_NON_SHARED_P): New.
ld/
PR ld/24151
* testsuite/ld-x86-64/pr24151a-x32.d: New file.
* testsuite/ld-x86-64/pr24151a.d: Likewise.
* testsuite/ld-x86-64/pr24151a.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24151a and pr24151a-x32.
Fedora Rawhide has just switched to GCC9, and now GDB doesn't compile
because of a BFD warning:
BUILDSTDERR: ../../bfd/elf32-arm.c: In function 'elf32_arm_final_link_relocate':
BUILDSTDERR: ../../bfd/elf32-arm.c:10907:10: error: absolute value function 'labs' given an argument of type 'bfd_signed_vma' {aka 'long long int'} but has parameter of type 'long int' which may cause truncation of value [-Werror=absolute-value]
BUILDSTDERR: 10907 | value = labs (relocation);
BUILDSTDERR: | ^~~~
You can take a look at the full build log here:
https://kojipkgs.fedoraproject.org//work/tasks/4828/32174828/build.log
The fix is (apparently) simple: instead of using 'labs', we should use
'llabs', since we're passing a 'bfd_signed_vma' to it, which is at
least a 'long long int', as far as I have checked. This is what this
patch does.
bfd/ChangeLog:
2019-01-25 Sergio Durigan Junior <sergiodj@redhat.com>
* elf32-arm.c (elf32_arm_final_link_relocate): Use 'llabs' instead
of 'labs' (and fix GCC warning).
2019-01-16 Kito Cheng <kito@andestech.com>
bfd/
* elf-attrs.c (vendor_obj_attr_size): Return 0 if size is 0 even
for OBJ_ATTR_PROC.
gas/
* testsuite/gas/riscv/attribute-empty.d: New.
Mode field should be read in octal, all the rest in decimal. Do so.
PR 24061
PR 21786
* coff-rs6000.c (GET_VALUE_IN_FIELD): Add base parameter and
adjust all callers.
(EQ_VALUE_IN_FIELD): Likewise.
* coff64-rs6000.c (GET_VALUE_IN_FIELD): Likewise.
When optimising inline plt calls to __tls_get_addr without tls marker
relocs, ld should zap any toc restore insn after the bctrl, to stop a
load-hit-store stall.
* elf64-ppc.c (ppc64_elf_relocate_section <tls_ldgd_opt>): When
editing an old-style __tls_get_addr call, replace a toc restore
insn with a nop.
Commit 2bf2bf23da exposed a bug on targets that create common sections
other than the standard ELF SHN_COMMON. If these are output by ld -r,
then their type becomes SHT_PROGBITS unless the target handles them
specially (eg. by elf_backend_special_sections), and if they are
merged into .bss/.sbss by ld -r then that section becomes SHT_PROGBITS.
Worse, if they are output by ld -r, then their size is increased by
bfd_generic_define_common_symbol during final link, which leads to
bogus file contents being copied to output.
For mips, it seems to me that the .scommon section should not be
output for ld -r, but I haven't made that change in this patch.
PR 24015
* elf.c (bfd_elf_get_default_section_type): Make common sections
SHT_NOBITS.
* linker.c (bfd_generic_define_common_symbol): Clear
SEC_HAS_CONTENTS.
PR 23966
* libbfd.c (SSIZE_MAX): Define.
(bfd_malloc, bfd_realloc): Don't cast size to long to check for
"negative" values, compare against SSIZE_MAX instead.
* elf32-i386.c (elf_i386_relocate_section): Call
elf_i386_rtype_to_howto to get reloc_howto_type pointer.
* elf64-x86-64.c (elf_x86_64_relocate_section): Call
elf_x86_64_rtype_to_howto to get reloc_howto_type pointer.
All of the backend relocate_section functions that interpret reloc
numbers assuming the input file is of the expected type (ie. same as
output or very similar) really ought to be checking input file type.
Not many do, and those that do currently just assert. This patch
replaces the assertion with a more graceful exit.
PR 23980
* elf32-i386.c (elf_i386_relocate_section): Exit with wrong format
error rather than asserting input file is as expected.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_relocate_section): Likewise.
* elf32-xtensa.c (elf_xtensa_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Exit with wrong format
error if input file is not ppc32 ELF.
PR 23994
* aoutx.h: Include limits.h.
(get_reloc_upper_bound): Detect long overflow and return a file
too big error if it occurs.
* elf.c: Include limits.h.
(_bfd_elf_get_symtab_upper_bound): Detect long overflow and return
a file too big error if it occurs.
(_bfd_elf_get_dynamic_symtab_upper_bound): Likewise.
(_bfd_elf_get_dynamic_reloc_upper_bound): Likewise.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
