Adds two new external authors to etc/update-copyright.py to cover
bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then
updates copyright messages as follows:
1) Update cgen/utils.scm emitted copyrights.
2) Run "etc/update-copyright.py --this-year" with an extra external
author I haven't committed, 'Kalray SA.', to cover gas testsuite
files (which should have their copyright message removed).
3) Build with --enable-maintainer-mode --enable-cgen-maint=yes.
4) Check out */po/*.pot which we don't update frequently.
This patch add support for FEAT_ECBHB "Exploitative control using
branch history information" adding the "clrbhb" instruction. AFAIU
the same alias was originally added as "clearbhb" before the
architecture was finalized (Mandatory v8.9-a/v9.4-a; Optional
v8.0-a+/v9.0-a+).
This patch add supports for FEAT_SPECRES2 "Enhanced speculation
restriction instructions" adding the "cosp" instruction.
This is mandatory v8.9-a/v9.4-a and optional v8.0-a+/v9.0-a+. It is
enabled by the +predres2 march flag.
This patch adds support for Guarded control stack data synchronization
instruction (GCSB DSYNC). This instruction is allocated to existing
HINT space and uses the HINT number 19 and to match this an entry is
added to the aarch64_hint_options array.
This patch adds for Guarded Control Stack Extension (GCS) extension. GCS feature is
optional from Armv9.4-A architecture and enabled by passing +gcs option to -march
(eg: -march=armv9.4-a+gcs) or using ".arch_extension gcs" directive in the assembly file.
Also this patch adds support for GCS instructions gcspushx, gcspopcx, gcspopx,
gcsss1, gcsss2, gcspushm, gcspopm, gcsstr and gcssttr.
This patch adds the RPRFM (range prefetch) instruction.
It was introduced as part of SME2, but it belongs to the
prefetch hint space and so doesn't require any specific
ISA flags.
The aarch64_rprfmop_array initialiser (deliberately) only
fills in the leading non-null elements.
This patch adds the SVE FDOT, SDOT and UDOT instructions,
which are available when FEAT_SME2 is implemented. The patch
also reorders the existing SVE_Zm3_22_INDEX to keep the
operands numerically sorted.
There are two instruction formats here:
- SQRSHR, SQRSHRU and UQRSHR, which operate on lists of two
or four registers.
- SQRSHRN, SQRSHRUN and UQRSHRN, which operate on lists of
four registers.
These are the first SME2 instructions to have immediate operands.
The patch makes sure that, when parsing SME2 instructions with
immediate operands, the new predicate-as-counter registers are
parsed as registers rather than as #-less immediates.
SMLALL, SMLSLL, UMLALL and UMLSLL have the same format.
USMLALL and SUMLALL allow the same operand types as those
instructions, except that SUMLALL does not have the multi-vector
x multi-vector forms (which would be redundant with USMLALL).
The {BF,F,S,U}MLAL and {BF,F,S,U}MLSL instructions share the same
encoding. They are the first instance of a ZA (as opposed to ZA tile)
operand having a range of offsets. As with ZA tiles, the expected
range size is encoded in the operand-specific data field.
Add support for the SME2 ADD. SUB, FADD and FSUB instructions.
SUB and FSUB have the same form as ADD and FADD, except that
ADD also has a 2-operand accumulating form.
The 64-bit ADD/SUB instructions require FEAT_SME_I16I64 and the
64-bit FADD/FSUB instructions require FEAT_SME_F64F64.
These are the first instructions to have tied register list
operands, as opposed to tied single registers.
The parse_operands change prevents unsuffixed Z registers (width==-1)
from being treated as though they had an Advanced SIMD-style suffix
(.4s etc.). It means that:
Error: expected element type rather than vector type at operand 2 -- `add za\.s\[w8,0\],{z0-z1}'
becomes:
Error: missing type suffix at operand 2 -- `add za\.s\[w8,0\],{z0-z1}'
SME2 adds lookup table instructions for quantisation. They use
a new lookup table register called ZT0.
LUTI2 takes an unsuffixed SVE vector index of the form Zn[<imm>],
which is the first time that this syntax has been used.
Implementation-wise, the main things to note here are:
- the WHILE* instructions have forms that return a pair of predicate
registers. This is the first time that we've had lists of predicate
registers, and they wrap around after register 15 rather than after
register 31.
- the predicate-as-counter WHILE* instructions have a fourth operand
that specifies the vector length. We can treat this as an enumeration,
except that immediate values aren't allowed.
- PEXT takes an unsuffixed predicate index of the form PN<n>[<imm>].
This is the first instance of a vector/predicate index having
no suffix.
SME2 adds LD1 and ST1 variants for lists of 2 and 4 registers.
The registers can be consecutive or strided. In the strided case,
2-register lists have a stride of 8, starting at register x0xxx.
4-register lists have a stride of 4, starting at register x00xx.
The instructions are predicated on a predicate-as-counter register in
the range pn8-pn15. Although we already had register fields with upper
bounds of 7 and 15, this is the first plain register operand to have a
nonzero lower bound. The patch uses the operand-specific data field
to record the minimum value, rather than having separate inserters
and extractors for each lower bound. This in turn required adding
an extra bit to the field.
SME2 defines new MOVA instructions for moving multiple registers
to and from ZA. As with SME, the instructions are also available
through MOV aliases.
One notable feature of these instructions (and many other SME2
instructions) is that some register lists must start at a multiple
of the list's size. The patch uses the general error "start register
out of range" when this constraint isn't met, rather than an error
specifically about multiples. This ensures that the error is
consistent between these simple consecutive lists and later
strided lists, for which the requirements aren't a simple multiple.
SME2 adds a new format for the existing SVE predicate registers:
predicates as counters rather than predicates as masks. In assembly
code, operands that interpret predicates as counters are written
pn<N> rather than p<N>.
This patch adds support for these registers and extends some
existing instructions to support them. Since the new forms
are just a programmer convenience, there's no need to make them
more restrictive than the earlier predicate-as-mask forms.
The newer update-copyright.py fixes file encoding too, removing cr/lf
on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and
embedded cr in binutils/testsuite/binutils-all/ar.exp string match.
The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
This patch adds support for FEAT_MOPS, an Armv8.8-A extension
that provides memcpy and memset acceleration instructions.
I took the perhaps controversial decision to generate the individual
instruction forms using macros rather than list them out individually.
This becomes useful with a follow-on patch to check that code follows
the correct P/M/E sequence.
[https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en]
include/
* opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro.
(AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS.
(AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd.
(AARCH64_OPND_MOPS_ADDR_Rs): Likewise.
(AARCH64_OPND_MOPS_WB_Rn): Likewise.
opcodes/
* aarch64-asm.h (ins_x0_to_x30): New inserter.
* aarch64-asm.c (aarch64_ins_x0_to_x30): New function.
* aarch64-dis.h (ext_x0_to_x30): New extractor.
* aarch64-dis.c (aarch64_ext_x0_to_x30): New function.
* aarch64-tbl.h (aarch64_feature_mops): New feature set.
(aarch64_feature_mops_memtag): Likewise.
(MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN)
(MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN)
(MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN)
(MOPS_SET_INSN): New macros.
(aarch64_opcode_table): Add MOPS instructions.
(aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
* aarch64-opc.c (aarch64_print_operand): Handle
AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and
AARCH64_OPND_MOPS_WB_Rn.
(verify_three_different_regs): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* doc/c-aarch64.texi: Document +mops.
* config/tc-aarch64.c (parse_x0_to_x30): New function.
(parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd,
AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn.
(aarch64_features): Add "mops".
* testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test.
* testsuite/gas/aarch64/mops_invalid.s,
* testsuite/gas/aarch64/mops_invalid.d,
* testsuite/gas/aarch64/mops_invalid.l: Likewise.
This patch is adding new SVE2 instructions added to support SME extension.
The following SVE2 instructions are added by the SME architecture:
* PSEL,
* REVD, SCLAMP and UCLAMP.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_pred_reg_with_index):
New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-9-illegal.d: New test.
* testsuite/gas/aarch64/sme-9-illegal.l: New test.
* testsuite/gas/aarch64/sme-9-illegal.s: New test.
* testsuite/gas/aarch64/sme-9.d: New test.
* testsuite/gas/aarch64/sme-9.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_PnT_Wm_imm.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index):
New inserter.
* aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index):
New extractor.
* aarch64-opc.c (aarch64_print_operand): Printout of
OPND_SME_PnT_Wm_imm.
* aarch64-opc.h (enum aarch64_field_kind): New bitfields
FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl.
* aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier.
(OP_SVE_QMQ): New qualifier.
(struct aarch64_opcode): New instructions PSEL, REVD,
SCLAMP and UCLAMP.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new SME mode selection and state access instructions:
* Add SMSTART and SMSTOP instructions.
* Add SVCR system register.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_sm_za): New parser.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-8-illegal.d: New test.
* testsuite/gas/aarch64/sme-8-illegal.l: New test.
* testsuite/gas/aarch64/sme-8-illegal.s: New test.
* testsuite/gas/aarch64/sme-8.d: New test.
* testsuite/gas/aarch64/sme-8.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_SM_ZA.
(enum aarch64_insn_class): New instruction classes
sme_start and sme_stop.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_pstatefield): New inserter.
(aarch64_ins_sme_sm_za): New inserter.
* aarch64-dis.c (aarch64_ext_imm): New extractor.
(aarch64_ext_pstatefield): New extractor.
(aarch64_ext_sme_sm_za): New extractor.
* aarch64-opc.c (operand_general_constraint_met_p):
New pstatefield value for SME instructions.
(aarch64_print_operand): Printout for OPND_SME_SM_ZA.
(SR_SME): New register SVCR.
* aarch64-opc.h (F_REG_IN_CRM): New register endcoding.
* aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding.
(PSTATE_ENCODE_CRM): Encode CRm field.
(PSTATE_DECODE_CRM): Decode CRm field.
(PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field.
(PSTATE_DECODE_CRM_IMM): Decode CRm immediate field.
(PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate
field.
* aarch64-tbl.h (struct aarch64_opcode): New SMSTART
and SMSTOP instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new loads and stores defined by SME instructions.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_address): New parser.
(parse_sme_za_hv_tiles_operand_with_braces): New parser.
(parse_sme_za_array): New parser.
(output_operand_error_record): Print error details if
present.
(parse_operands): Support new operands.
* testsuite/gas/aarch64/sme-5-illegal.d: New test.
* testsuite/gas/aarch64/sme-5-illegal.l: New test.
* testsuite/gas/aarch64/sme-5-illegal.s: New test.
* testsuite/gas/aarch64/sme-5.d: New test.
* testsuite/gas/aarch64/sme-5.s: New test.
* testsuite/gas/aarch64/sme-6-illegal.d: New test.
* testsuite/gas/aarch64/sme-6-illegal.l: New test.
* testsuite/gas/aarch64/sme-6-illegal.s: New test.
* testsuite/gas/aarch64/sme-6.d: New test.
* testsuite/gas/aarch64/sme-6.s: New test.
* testsuite/gas/aarch64/sme-7-illegal.d: New test.
* testsuite/gas/aarch64/sme-7-illegal.l: New test.
* testsuite/gas/aarch64/sme-7-illegal.s: New test.
* testsuite/gas/aarch64/sme-7.d: New test.
* testsuite/gas/aarch64/sme-7.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands.
(enum aarch64_insn_class): Added sme_ldr and sme_str.
(AARCH64_OPDE_UNTIED_IMMS): New operand error kind.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter.
(aarch64_ins_sme_za_list): New inserter.
(aarch64_ins_sme_za_array): New inserter.
(aarch64_ins_sme_addr_ri_u4xvl): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added
ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor.
(aarch64_ext_sme_za_list): New extractor.
(aarch64_ext_sme_za_array): New extractor.
(aarch64_ext_sme_addr_ri_u4xvl): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added
ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl.
* aarch64-opc.c (operand_general_constraint_met_p):
(aarch64_match_operands_constraint): Handle sme_ldr, sme_str
and sme_misc.
(aarch64_print_operand): New operands supported.
* aarch64-tbl.h (OP_SVE_QUU): New qualifier.
(OP_SVE_QZU): New qualifier.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding ZERO (a list of 64-bit element ZA tiles)
instruction.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_list_of_64bit_tiles):
New parser.
(parse_operands): Handle OPND_SME_list_of_64bit_tiles.
* testsuite/gas/aarch64/sme-4-illegal.d: New test.
* testsuite/gas/aarch64/sme-4-illegal.l: New test.
* testsuite/gas/aarch64/sme-4-illegal.s: New test.
* testsuite/gas/aarch64/sme-4.d: New test.
* testsuite/gas/aarch64/sme-4.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_SME_list_of_64bit_tiles.
opcodes/ChangeLog:
* aarch64-opc.c (print_sme_za_list): New printing function.
(aarch64_print_operand): Handle OPND_SME_list_of_64bit_tiles.
* aarch64-opc.h (enum aarch64_field_kind): New bitfield
FLD_SME_zero_mask.
* aarch64-tbl.h (struct aarch64_opcode): New ZERO instruction.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
This patch is adding new MOV (alias) and MOVA SME instruction.
gas/ChangeLog:
* config/tc-aarch64.c (enum sme_hv_slice): new enum.
(struct reloc_entry): Added ZAH and ZAV registers.
(parse_sme_immediate): Immediate parser.
(parse_sme_za_hv_tiles_operand): ZA tile parser.
(parse_sme_za_hv_tiles_operand_index): Index parser.
(parse_operands): Added ZA tile parser calls.
(REGNUMS): New macro. Regs with suffix.
(REGSET16S): New macro. 16 regs with suffix.
* testsuite/gas/aarch64/sme-2-illegal.d: New test.
* testsuite/gas/aarch64/sme-2-illegal.l: New test.
* testsuite/gas/aarch64/sme-2-illegal.s: New test.
* testsuite/gas/aarch64/sme-2.d: New test.
* testsuite/gas/aarch64/sme-2.s: New test.
* testsuite/gas/aarch64/sme-2a.d: New test.
* testsuite/gas/aarch64/sme-2a.s: New test.
* testsuite/gas/aarch64/sme-3-illegal.d: New test.
* testsuite/gas/aarch64/sme-3-illegal.l: New test.
* testsuite/gas/aarch64/sme-3-illegal.s: New test.
* testsuite/gas/aarch64/sme-3.d: New test.
* testsuite/gas/aarch64/sme-3.s: New test.
* testsuite/gas/aarch64/sme-3a.d: New test.
* testsuite/gas/aarch64/sme-3a.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New enums
AARCH64_OPND_SME_ZA_HV_idx_src and
AARCH64_OPND_SME_ZA_HV_idx_dest.
(struct aarch64_opnd_info): New ZA tile vector struct.
opcodes/ChangeLog:
* aarch64-asm.c (aarch64_ins_sme_za_hv_tiles):
New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER):
New inserter ins_sme_za_hv_tiles.
* aarch64-dis.c (aarch64_ext_sme_za_hv_tiles):
New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR):
New extractor ext_sme_za_hv_tiles.
* aarch64-opc.c (aarch64_print_operand):
Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest.
* aarch64-opc.h (enum aarch64_field_kind): New enums
FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv.
(struct aarch64_operand): Increase fields size to 5.
* aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Patch is adding new SME matrix instructions. Please note additional
instructions will be added in following patches.
gas/ChangeLog:
* config/tc-aarch64.c (parse_sme_zada_operand):
New parser.
* config/tc-aarch64.c (parse_reg_with_qual):
New reg parser.
* config/tc-aarch64.c (R_ZA): New egister type.
(parse_operands): New parser.
* testsuite/gas/aarch64/sme-illegal.d: New test.
* testsuite/gas/aarch64/sme-illegal.l: New test.
* testsuite/gas/aarch64/sme-illegal.s: New test.
* testsuite/gas/aarch64/sme.d: New test.
* testsuite/gas/aarch64/sme.s: New test.
* testsuite/gas/aarch64/sme-f64.d: New test.
* testsuite/gas/aarch64/sme-f64.s: New test.
* testsuite/gas/aarch64/sme-i64.d: New test.
* testsuite/gas/aarch64/sme-i64.s: New test.
include/ChangeLog:
* opcode/aarch64.h (enum aarch64_opnd): New operands
AARCH64_OPND_SME_ZAda_2b, AARCH64_OPND_SME_ZAda_3b and
AARCH64_OPND_SME_Pm.
(enum aarch64_insn_class): New instruction class sme_misc.
opcodes/ChangeLog:
* aarch64-opc.c (aarch64_print_operand):
Print OPND_SME_ZAda_2b and OPND_SME_ZAda_3b operands.
(verify_constraints): Handle OPND_SME_Pm.
* aarch64-opc.h (enum aarch64_field_kind):
New bit fields FLD_SME_ZAda_2b, FLD_SME_ZAda_3b and FLD_SME_Pm.
* aarch64-tbl.h (OP_SME_ZADA_PN_PM_ZN_S): New qualifier set.
(OP_SME_ZADA_PN_PM_ZN_D): New qualifier.
(OP_SME_ZADA_PN_PM_ZN_ZM): New qualifier.
(OP_SME_ZADA_S_PM_PM_S_S): New qualifier.
(OP_SME_ZADA_D_PM_PM_D_D): New qualifier.
(OP_SME_ZADA_S_PM_PM_H_H): New qualifier.
(OP_SME_ZADA_S_PM_PM_B_B): New qualifier.
(OP_SME_ZADA_D_PM_PM_H_H): New qualifier.
(SME_INSN): New instruction macro.
(SME_F64_INSN): New instruction macro.
(SME_I64_INSN): New instruction macro.
(SME_INSNC): New instruction macro.
(struct aarch64_opcode): New SME instructions.
aarch64-asm-2.c: Regenerate.
aarch64-dis-2.c: Regenerate.
aarch64-opc-2.c: Regenerate.
Atomic 64-byte load/store instructions limit Rt register number to
values matching below condition (register <Xt> number must be even
and <= 22):
if Rt<4:3> == '11' || Rt<0> == '1' then UNDEFINED;
This patch adds check if Rt fulfills above requirement.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
Armv8.7 architecture introduces the "accelerator extension", aka
load/store of 64 bytes. New atomic load/store instructions are: LD64B,
ST64B, ST64BV and ST64BV0.
This patch adds:
+ New feature +ls64 to -march command line.
+ New atomic load/store instructions associated with above feature.
For more details regarding atomic 64-byte load/store instruction for
Armv8.7 please refer to Arm A64 Instruction set documentation for
Armv8-A architecture profile, see document page 157 for load
instruction, and pages 414-418 for store instructions of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
This patch adds new to Armv8.7 WFIT instruction which take one operand:
WFIT <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFIT (Wait For Interrupt with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 570 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: Update test with WFIT insn.
* testsuite/gas/aarch64/system-5.s: Update test with WFIT insn.
opcodes/ChangeLog:
2020-10-30 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): New instruction WFIT.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds:
+ New feature +csre to -march command line.
+ New instruction CSR PDEC associated with CSRE feature.
Please note that CSRE system registers were already upstreamed. This patch
should finalize CSRE feature implementation.
CSRE feature adds CSR PDEC (Decrements Call stack pointer by the size of
a Call stack record) instruction. Although this instruction has operand
(PDEC) it's instruction's only operand. PDEC forces instruction field Rt
to be set to 0b1111. This results in fixed opcode of the instruction.
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* config/tc-aarch64.c (parse_csr_operand): New operand parser.
(parse_operands): Call to CSR operand parser.
* testsuite/gas/aarch64/csre_csr-invalid.d: New test.
* testsuite/gas/aarch64/csre_csr-invalid.l: New test.
* testsuite/gas/aarch64/csre_csr-invalid.s: New test.
* testsuite/gas/aarch64/csre_csr.d: New test.
* testsuite/gas/aarch64/csre_csr.s: New test.
include/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CSRE): New -march feature.
(enum aarch64_opnd): New CSR instruction field AARCH64_OPND_CSRE_CSR.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-opc.c (aarch64_print_operand): CSR PDEC operand print-out.
* aarch64-tbl.h (CSRE): New CSRE feature handler.
(_CSRE_INSN): New CSRE instruction type.
(struct aarch64_opcode): New 'csre' entry for a CSRE CLI feature.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new to Armv8.7 WFET instruction which take one operand:
WFET <Xt>
Where:
<Xt> is 64-bit name of the general-purpose source register, encoded in the
"Rd" field.
For more details regarding WFET (Wait For Event with Timeout) instruction for
Armv8.7-a please refer to Arm A64 Instruction set documentation for Armv8-A
architecture profile, see document pages 565 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Update docs.
* testsuite/gas/aarch64/system-5.d: New test.
* testsuite/gas/aarch64/system-5.s: New test.
opcodes/ChangeLog:
2020-10-27 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-tbl.h (struct aarch64_opcode): Add new WFET instruction encoding
and operand description.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch adds new variant (nXS) of DSB memory barrier instruction
available in Armv8.7-a. New nXS variant has different encoding in
comparison with pre Armv8.7-a DSB memory barrier variant thus new
instruction and new operand was added.
DSB memory nXS barrier variant specifies the limitation on the barrier
operation. Allowed values are:
DSB SYnXS|#28
DSB ISHnXS|#24
DSB NSHnXS|#20
DSB OSHnXS|#16
Please note that till now, for barriers, barrier operation was encoded in
4-bit unsigned immediate CRm field (in the range 0 to 15).
For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned
assembly instruction immediate, encoded in instruction in two bits CRm<3:2>:
CRm<3:2> #imm
00 16
01 20
10 24
11 28
This patch extends current AArch64 barrier instructions with above mapping.
Notable patch changes include:
+ New DSB memory barrier variant encoding for Armv8.7-a.
+ New operand BARRIER_DSB_NXS for above instruction in order to
distinguish between existing and new DSB instruction flavour.
+ New set of DSB nXS barrier options.
+ New instruction inserter and extractor map between instruction
immediate 5-bit value and 2-bit CRm field of the instruction itself (see
FLD_CRm_dsb_nxs).
+ Regeneration of aarch64-[asm|dis|opc]-2.c files.
+ Test cases to cover new instruction assembling and disassembling.
For more details regarding DSB memory barrier instruction and its
Armv8.7-a flavour please refer to Arm A64 Instruction set documentation
for Armv8-A architecture profile, see document pages 132-133 of [0].
[0]: https://developer.arm.com/docs/ddi0596/i
gas/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* NEWS: Docs update.
* config/tc-aarch64.c (parse_operands): Add
AARCH64_OPND_BARRIER_DSB_NXS handler.
(md_begin): Add content of aarch64_barrier_dsb_nxs_options to
aarch64_barrier_opt_hsh hash.
* testsuite/gas/aarch64/system-4-invalid.d: New test.
* testsuite/gas/aarch64/system-4-invalid.l: New test.
* testsuite/gas/aarch64/system-4-invalid.s: New test.
* testsuite/gas/aarch64/system-4.d: New test.
* testsuite/gas/aarch64/system-4.s: New test.
include/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New operand
AARCH64_OPND_BARRIER_DSB_NXS.
(aarch64_barrier_dsb_nxs_options): Declare DSB nXS options.
opcodes/ChangeLog:
2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com>
* aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter.
* aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter
ins_barrier_dsb_nx.
* aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor.
* aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor
ext_barrier_dsb_nx.
* aarch64-opc.c (aarch64_print_operand): New options table
aarch64_barrier_dsb_nxs_options.
* aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs.
* aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier
Armv8.7-a instruction.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This patch implements the TSB instructions:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
tsb-csync-trace-synchronization-barrier
Since TSB and PSB both use the same (and only) argument "CSYNC", this patch
reuses it for TSB. However, the same argument would imply different value
for CRm:Op2 which are anyway fixed values, so I have diverted the
inserter/extracter function to dummy versions instead of the "hint" version.
The operand checker part still uses the existing infratructure for
AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly.
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_barrier_psb): Update error messages
to include TSB.
* testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests.
* testsuite/gas/aarch64/system-2.s: Add new tsb tests.
* testsuite/gas/aarch64/system.d: Update.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_none): New.
* aarch64-asm.h (ins_none): New declaration.
* aarch64-dis.c (aarch64_ext_none): New.
* aarch64-dis.h (ext_none): New declaration.
* aarch64-opc.c (aarch64_print_operand): Update case for
AARCH64_OPND_BARRIER_PSB.
* aarch64-tbl.h (aarch64_opcode_table): Add tsb.
(AARCH64_OPERANDS): Update inserter/extracter for
AARCH64_OPND_BARRIER_PSB to use new dummy functions.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
There are a few instruction in AArch64 that are in the HINT space. Any of
these instructions should be accepted by the assembler/disassembler at any
architecture version. This patch fixes the existing instructions that are
not behaving accordingly.
I have used all of the instructions mentioned in the following to make the
changes:
https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/
hint-hint-instruction
gas/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/bti.d: Update -march option.
* testsuite/gas/aarch64/illegal-bti.d: Remove.
* testsuite/gas/aarch64/illegal-bti.l: Remove.
* testsuite/gas/aarch64/illegal-ras-1.l: Remove esb.
* testsuite/gas/aarch64/illegal-ras-1.s: Remove esb.
opcodes/ChangeLog:
2020-04-20 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): Remove.
(aarch64_feature_ras, RAS): Likewise.
(aarch64_feature_stat_profile, STAT_PROFILE): Likewise.
(aarch64_opcode_table): Update bti, xpaclri, pacia1716, pacib1716,
autia1716, autib1716, esb, psb, dgh, paciaz, paciasp, pacibz, pacibsp,
autiaz, autiasp, autibz, autibsp to be CORE_INSN.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
This fixes the preferred disassembly for cfinv. The Armv8.4-a instruction
overlaps with the possible encoding space for msr. This because msr allows you
to use unallocated encoding space using the general sA_B_cC_cD_E form.
However when an encoding does become allocated then we need to ensure that it's
used as the preferred disassembly. The problem with cfinv is that its mask has
all bits sets because it has no arguments.
This causes issues for the Alias resolver in gas as it uses the mask to build
alias graph. In this case it can't do it since it thinks almost everything
would alias with cfinv. So instead we can only fix this by moving cfinv before
msr.
gas/ChangeLog:
PR 25403
* testsuite/gas/aarch64/armv8_4-a.d: Add cfinv.
* testsuite/gas/aarch64/armv8_4-a.s: Likewise.
opcodes/ChangeLog:
PR 25403
* aarch64-tbl.h (struct aarch64_opcode): Re-order cfinv.
* aarch64-asm-2.c: Regenerate
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
Hi,
This patch is part of a series that adds support for Armv8.6-A
(Matrix Multiply and BFloat16 extensions) to binutils.
This patch introduces the Matrix Multiply (Int8, F32, F64) extensions
to the aarch64 backend.
The following instructions are added: {s/u}mmla, usmmla, {us/su}dot,
fmmla, ld1rob, ld1roh, d1row, ld1rod, uzip{1/2}, trn{1/2}.
Committed on behalf of Mihail Ionescu.
gas/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* config/tc-aarch64.c: Add new arch fetures to suppport the mm extension.
(parse_operands): Add new operand.
* testsuite/gas/aarch64/i8mm.s: New test.
* testsuite/gas/aarch64/i8mm.d: New test.
* testsuite/gas/aarch64/f32mm.s: New test.
* testsuite/gas/aarch64/f32mm.d: New test.
* testsuite/gas/aarch64/f64mm.s: New test.
* testsuite/gas/aarch64/f64mm.d: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.s: New test.
* testsuite/gas/aarch64/sve-movprfx-mm.d: New test.
include/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_I8MM): New.
(AARCH64_FEATURE_F32MM): New.
(AARCH64_FEATURE_F64MM): New.
(AARCH64_OPND_SVE_ADDR_RI_S4x32): New.
(enum aarch64_insn_class): Add new instruction class "aarch64_misc" for
instructions that do not require special handling.
opcodes/ChangeLog:
2019-11-07 Mihail Ionescu <mihail.ionescu@arm.com>
* aarch64-tbl.h (aarch64_feature_i8mm_sve, aarch64_feature_f32mm_sve,
aarch64_feature_f64mm_sve, aarch64_feature_i8mm, aarch64_feature_f32mm,
aarch64_feature_f64mm): New feature sets.
(INT8MATMUL_INSN, F64MATMUL_SVE_INSN, F64MATMUL_INSN,
F32MATMUL_SVE_INSN, F32MATMUL_INSN): New macros to define matrix multiply
instructions.
(I8MM_SVE, F32MM_SVE, F64MM_SVE, I8MM, F32MM, F64MM): New feature set
macros.
(QL_MMLA64, OP_SVE_SBB): New qualifiers.
(OP_SVE_QQQ): New qualifier.
(INT8MATMUL_SVE_INSNC, F64MATMUL_SVE_INSNC,
F32MATMUL_SVE_INSNC): New feature set for bfloat16 instructions to support
the movprfx constraint.
(aarch64_opcode_table): Support for SVE_ADDR_RI_S4x32.
(aarch64_opcode_table): Define new instructions smmla,
ummla, usmmla, usdot, sudot, fmmla, ld1rob, ld1roh, ld1row, ld1rod
uzip{1/2}, trn{1/2}.
* aarch64-opc.c (operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_ADDR_RI_S4x32.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_ADDR_RI_S4x32.
* aarch64-dis-2.c (aarch64_opcode_lookup_1, aarch64_find_next_opcode):
Account for new instructions.
* opcodes/aarch64-asm-2.c (aarch64_insert_operand): Support the new
S4x32 operand.
* aarch64-opc-2.c (aarch64_operands): Support the new S4x32 operand.
Regression tested on arm-none-eabi.
Is it ok for trunk?
Regards,
Mihail
New operand describes a shift-left immediate encoded in bits
22:20-19:18-16 where UInt(bits) - esize == shift.
This operand is useful for instructions like sshllb.
gas/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-aarch64.c (parse_operands): Handle new SVE_SHLIMM_UNPRED_22
operand.
include/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): New SVE_SHLIMM_UNPRED_22
operand.
opcodes/ChangeLog:
2019-05-09 Matthew Malcomson <matthew.malcomson@arm.com>
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
* aarch64-opc.c (operand_general_constraint_met_p): Constraint checking
for SVE_SHLIMM_UNPRED_22.
(aarch64_print_operand): Add printing for SVE_SHLIMM_UNPRED_22.
* aarch64-tbl.h (AARCH64_OPERANDS): Use new SVE_SHLIMM_UNPRED_22
operand.
