Re-use the existing memory core that handles reads/writes.
The verbose command is converted to the common --verbose flag
since only a few call sites use it now.
In preparation for converting to the common memory framework, the custom
commands get in our way. But when we realize that gdb support has been
dropped for mcore, it makes things a bit easier: the main runner does not
let you run arbitrary commands once simulation starts.
So lets disable watchpoint support until it can be converted to the common
watchpoint logic. There's already an ifdef to let us do that.
We straight up drop support for the dumpmem command (no other sim supports
this, and if it's a feature people want, we can add a common func) and the
clearstats command (not a big deal -- just restart your simulation).
We leave in place the verbose check points as a follow up commit will cut
that over to common logic.
Now that libgloss has a header tracking the syscalls for this arch, we
can update the database to include it for the symbolic constants/maps.
Then we can switch the mcore syscall callbacks over to the common ones.
Since newlib no longer shares the same repo as binutils/gdb, we have to go
searching further afield to locate the sources. We still look at the top
level for newlib, but if that is not found, we also try up one dir outside
of this source tree. It sucks, but better than the status quo (no workie).
This patch extends the rl78 prologue analyzer so that it can recognize
this kind of prologue:
0x119f <main>: movw ax, sp
0x11a1 <main+2>: subw ax, #0x1fa6
0x11a4 <main+5>: movw sp, ax
The test case for gdb.base/miscexprs.exp is now compiled to generate
that sequence instead of a much longer and more inefficient sequence.
gdb/ChangeLog:
* rl78-tdep.c (RL78_SP_ADDR): Define.
(opc_reg_to_gdb_regnum): New static function.
(rl78_analyze_prologue): Recognize instructions forming slightly
more interesting prologues.
commit 9ad5cbcfb2 added the initial support
for more than 64k ELF sections with holes for reserved section indices in
section header table and set entries of reserved section indices in
section header table to index 0:
for (secn = 1; secn < section_number; ++secn)
- i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd),
- i_shdrp[secn]->sh_name);
-
+ if (i_shdrp[secn] == NULL)
+ i_shdrp[secn] = i_shdrp[0];
+ else
+ i_shdrp[secn]->sh_name = _bfd_elf_strtab_offset (elf_shstrtab (abfd),
+ i_shdrp[secn]->sh_name);
commit 4fbb74a605 removed holes in section
header table. Check for i_shdrp[secn] == NULL is no longer needed now.
This patch removes it.
* elf.c (assign_section_numbers): Always set up sh_name.
Iterate ELF sections by pointer without section counter. It removes
"i++".
* elf.c (assign_file_positions_for_non_load_sections): Iterate
sections by pointer.
(_bfd_elf_assign_file_positions_for_non_load): Likewise.
This patch silences texinfo 5.1 warnings by using @subsection and
sorting entries in Machine Dependencies menu.
* doc/as.texinfo (Bundle directives): Shorten menu entry and
use @subsection.
(CFI directives): Use @subsection.
(SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
* doc/c-i386.texi (i386-Mnemonics): Use @subsection.
This commit fixes three gdb.base/attach.exp failures when using
extended remote targets. The failures occurred because GDB now
locates and loads files when attaching on remote targets if the
remote target supports qXfer:exec-file:read; the filenames were
shown but with "target:" prefixes which the test has been updated
to handle.
gdb/testsuite/ChangeLog:
* gdb.base/attach.exp: Fix three extended remote failures.
Code in update_dprintf_command_list performed a duplicated memory
allocation which caused an obvious memory leak. This removes the
duplication.
gdb/
2015-04-19 Gabriel Krisman Bertazi <gabriel@krisman.be>
* breakpoint.c (update_dprintf_command_list): Remove duplicated
xmalloc.
gdb/
* reply_mig_hack.awk: Don't bother to declare an intermediate
function pointer variable.
... allowing us to simplify the parsing a little bit. And, instead of
"warning: initialization from incompatible pointer type", we now get "warning:
function called through a non-compatible type". Oh well.
Change data ordering in emulated memory from target order (big endian)
to host order. Improves performance and simplifies most memory
operations. Requires some byte twisting during stores on little
endian hosts (intel). Also removed support for little-endian binaries.
Now that we've unified sim-cpu, we can delete the duplicate sim-engine
hooks -- these targets defined these only because they didn't fully
implement the sim-cpu callbacks.
Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
gdb/ChangeLog:
* solib-svr4.c (svr4_exec_displacement): Rename outer "displacement"
to "exec_displacement" to avoid confusion with inner use of the name.
xtensa_usrregs_info refers to undefined variables xtensa_num_regs and
xtensa_regmap. Drop xtensa_usrregs_info and replace pointer to usrregs
in regs_info with NULL since all registers are read/set through regsets.
2015-04-17 Max Filippov <jcmvbkbc@gmail.com>
gdb/gdbserver/
* linux-xtensa-low.c (xtensa_usrregs_info): Remove.
(regs_info): Replace usrregs pointer with NULL.
This patch is to cherry-pick part of Pedro's patch here
https://sourceware.org/ml/gdb-patches/2015-04/msg00527.html in which
zero is returned if the HW point isn't supported.
In arm-linux native gdb testing on a board doesn't support HW breakpoint,
without this patch, the output in gdb.base/breakpoint-in-ro-region.exp is like:
(gdb) hbreak *0x83bc^M
Hardware breakpoints used exceeds limit.^M
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: probe hbreak support (support)
with this patch, the output becomes:
(gdb) hbreak *0x83bc^M
No hardware breakpoint support in the target.^M
(gdb) PASS: gdb.base/breakpoint-in-ro-region.exp: probe hbreak support (no support)
As a result, the following fails are fixed.
-FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw on: step in ro region (cannot insert hw break)
-FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted off: auto-hw on: thread advanced
-FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw on: step in ro region (cannot insert hw break)
-FAIL: gdb.base/breakpoint-in-ro-region.exp: always-inserted on: auto-hw on: thread advanced
gdb:
2015-04-17 Pedro Alves <palves@redhat.com>
* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Return zero
if HW point of TYPE isn't supported.
The return value of target_can_use_hardware_watchpoint isn't well
documented, so this patch is to update the comments to reflect the
fact. This patch also removes a trailing ";" which is picked up
from Pedro's patch https://sourceware.org/ml/gdb-patches/2015-04/msg00527.html
gdb:
2015-04-17 Yao Qi <yao.qi@linaro.org>
Pedro Alves <palves@redhat.com>
* target.h (target_can_use_hardware_watchpoint): Update comments.
Remove trailing ";".
This commit modifies remote_add_inferior to take an extra argument
try_open_exec. If this is nonzero, remote_add_inferior will attempt
to open this inferior's executable as the main executable if no main
executable is open already. Callers are updated appropriately.
With this commit, remote debugging can now be initiated using only a
"target remote" or "target extended-remote" command; no "set sysroot"
or "file" commands are required, e.g.
bash$ gdb -q
(gdb) target remote | gdbserver - /bin/sh
Remote debugging using | gdbserver - /bin/sh
Process /bin/sh created; pid = 32166
stdin/stdout redirected
Remote debugging using stdio
Reading symbols from target:/bin/bash...
One testcase required updating as a result of this commit. The test
checked that GDB's "info files" command does not crash if no main
executable is open, and relied on GDB's inability to access the main
executable over the remote protocol. The test was updated to inhibit
this new behavior.
gdb/ChangeLog:
* remote.c (remote_add_inferior): New argument try_open_exec.
If nonzero, attempt to open the inferior's executable file as
the main executable if no main executable is open already.
All callers updated.
* NEWS: Mention that GDB now supports automatic location and
retrieval of executable + files from remote targets.
gdb/doc/ChangeLog:
* gdb.texinfo (Connecting to a Remote Target): Mention that
GDB can access program files from remote targets that support
qXfer:exec-file:read and Host I/O packets.
gdb/testsuite/ChangeLog:
* gdb.server/server-exec-info.exp: Inhibit GDB from accessing
the main executable over the remote protocol.
This commit adds a new packet "qXfer:exec-file:read" to the remote
protocol that can be used to obtain the pathname of the file that
was executed to create a process on the remote system. Support for
this packet is added to GDB and remote_ops.to_pid_to_exec_file is
implemented using it.
gdb/ChangeLog:
* target.h (TARGET_OBJECT_EXEC_FILE): New enum value.
* remote.c (PACKET_qXfer_exec_file): Likewise.
(remote_protocol_features): Register the
"qXfer:exec-file:read" feature.
(remote_xfer_partial): Handle TARGET_OBJECT_EXEC_FILE.
(remote_pid_to_exec_file): New function.
(init_remote_ops): Initialize to_pid_to_exec_file.
(_initialize_remote): Register new "set/show remote
pid-to-exec-file-packet" command.
* NEWS: Announce new qXfer:exec-file:read packet.
gdb/doc/ChangeLog:
* gdb.texinfo (Remote Configuration): Document the "set/show
remote pid-to-exec-file-packet" command.
(General Query Packets): Document the qXfer:exec-file:read
qSupported features. Document the qXfer:exec-file:read packet.
This commit introduces a new function linux_proc_pid_to_exec_file
that shared Linux code can use to discover the filename of the
executable that was run to create a process on the system.
gdb/ChangeLog:
* nat/linux-procfs.h (linux_proc_pid_to_exec_file):
New declaration.
* nat/linux-procfs.c (linux_proc_pid_to_exec_file):
New function, factored out from...
* linux-nat.c (linux_child_pid_to_exec_file): ...here.
This commit updates exec_file_locate_attach to use exec_file_find
to compute the full pathname of the main executable in some cases.
The net effect of this is that the main executable's path will be
prefixed with gdb_sysroot in the same way that shared library paths
currently are.
gdb/ChangeLog:
* exec.c (solist.h): New include.
(exec_file_locate_attach): Prefix absolute executable
paths with gdb_sysroot if set.
* NEWS: Mention that executable paths may be prepended
with sysroot.
gdb/doc/ChangeLog:
* gdb.texinfo (set sysroot): Document that "set sysroot" also
applies to executable paths if supplied to GDB as absolute.
This commit adds a new function, exec_file_find, which computes the
full pathname of the main executable in much the same way solib_find
does for pathnames of shared libraries. The bulk of the existing
solib_find was moved into a new static function solib_find_1, with
exec_file_find and solib_find being small wrappers for solib_find_1.
gdb/ChangeLog:
* solist.h (exec_file_find): New declaration.
* solib.c (solib_find_1): New function, factored out from...
(solib_find): ...here.
(exec_file_find): New function.
This commit adds a new function, exec_file_locate_attach, which works
like exec_file_attach except that, instead of a filename argument, it
takes an integer process ID and attempts to determine the executable
filename from that.
gdb/ChangeLog:
* gdbcore.h (exec_file_locate_attach): New declaration.
* exec.c (exec_file_locate_attach): New function, factored
out from...
* infcmd.c (attach_command_post_wait): ...here.
Re-use the existing memory core that handles reads/writes.
This drops support for the dumpmem command, but gdb itself has
support for dumping memory regions.
The verbose command is converted to the common --verbose flag
since only two call sites use it now.
Support for the clearstats command is dropped entirely, but no
other sim really does this, and the same thing can be done by
reloading. If it's important (clearing cycle stats) to someone,
we can add a common function for it.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
It implemented scanning the binary and reporting occurrences to users
when '--fix-cortex-a53' is turned on. With this, gold users will be
able to see if or not there are such erratum occurrences in the output
binary. Also included in the CL is reading/recording mapping symbols,
which is needed during scan.
gold/ChangeLog:
* aarch64.cc (AArch64_insn_utilities): New utility class.
(AArch64_relobj::Mapping_symbol_position): New struct.
(AArch64_relobj::Mapping_symbol_info): New typedef.
(AArch64_relobj::do_count_local_symbols): New function overriding
parent's implementation.
(AArch64_relobj::mapping_symbol_info_): New member
(AArch64_relobj::scan_erratum_843419): New method.
(Target_aarch64::scan_erratum_843419_span): New method.
(Target_aarch64::is_erratum_843419_sequence): New method.
* options.h (fix_cortex_a53): New option.
Fixes:
-FAIL: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint created
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint on marker is installed
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
These tests do something like this:
#0 - start gdb/gdbserver normally
#1 - setup some things in the debug session
#2 - disconnect from gdbserver
#3 - restart gdb
#4 - reconnect to gdbserver
The problem is that the native-extended-gdbserver board always spawns
a new gdbserver instance in #3 (and has gdb connect to that). So when
the test gets to #4, it connects to that new instance instead of the
old one:
(gdb) spawn ../gdbserver/gdbserver --multi :2354
Listening on port 2354
target extended-remote localhost:2354
Remote debugging using localhost:2354
...
spawn ../gdbserver/gdbserver --multi :2355
Listening on port 2355
47-target-select extended-remote localhost:2355
=tsv-created,name="trace_timestamp",initial="0"\n
47^connected
(gdb)
...
47-target-select extended-remote localhost:2355
47^connected
(gdb)
FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
testsuite/ChangeLog:
2015-04-16 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
a new gdbserver if gdbserver_reconnect_p is set.
Commit 6423214f (testsuite: Don't use expect_background to reap
gdbserver) broke a couple tests that set gdbserver_reconnect_p and
restart gdb before reconnecting, because a gdb_exit (e.g., through
clean_restart) exits gdbserver unconditionally.
Fixes, with --target_board=native-gdbserver:
-FAIL: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint created
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: tracepoint on marker is installed
+PASS: gdb.trace/mi-tracepoint-changed.exp: reconnect: break-info 1
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
-FAIL: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv1 created
+PASS: gdb.trace/mi-tsv-changed.exp: upload: tsv2 created
gdb/testsuite/
2015-04-16 Pedro Alves <palves@redhat.com>
* lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
is set, don't exit gdbserver.
Hi,
When I run gdb.threads/non-stop-fair-events.exp on arm-linux target,
I see the following message in the debugging log,
displaced: breakpoint is gone: Thread 22518, step(1)^M
Sending packet: $vCont;s:p57f3.57f6#9d...
^^^^^^^^^
GDB sends vCont;s by mistake, and GDBserver fails on assert. GDB
doesn't consider software single step in infrun.c:displaced_step_fixup,
/* Go back to what we were trying to do. */
step = currently_stepping (tp);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: breakpoint is gone: %s, step(%d)\n",
target_pid_to_str (tp->ptid), step);
target_resume (ptid, step, GDB_SIGNAL_0);
The patch is to let GDB consider software single step here. It fixes
fails in gdb.threads/non-stop-fair-events.exp on arm.
gdb:
2015-04-16 Yao Qi <yao.qi@linaro.org>
* infrun.c (maybe_software_singlestep): Declare.
(displaced_step_fixup): Call maybe_software_singlestep.
The test case s390-vregs.exp yields compile errors on 31-bit targets
as well as when using a GCC that defaults to an older "-march=". This
patch fixes these issues.
gdb/testsuite/ChangeLog:
* gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
appropriate .insn, such that an older assembler can be used.
* gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
the z/Architecture instruction set on 31-bit targets as well.
