PR 25570
* ldlang.c (lang_size_sections_1): Don't report changes on
second and subsequent iterations that make no change in
alignment from that already reported.
Note that because we should report a signed delta from the previous
VMA it isn't possible to use ngettext. ngettext only supports
unsigned long values. So byte/bytes goes from the message.
PR 25570
* ldlang.c (lang_sizing_iteration): New static var.
(lang_size_sections_1): Warn about no memory region only on first
iteration. Warn about changing start address on first iteration
then any delta from that on subsequent iterations. Report a signed
delta.
(one_lang_size_sections_pass): Increment lang_sizing_iteration.
The object_p (and archive_p, core_file_p) functions are not supposed
to have any target specific malloc'd memory attached to the bfd on
their return. This should be obvious on a failure return, but it's
also true for a successful return. The reason is that even though the
object_p recognises the file, that particular target may not be used
and thus the bfd won't be closed calling close_and_cleanup for the
target that allocated the memory.
It turns out that the object_p bfd_target* return value isn't needed.
In all cases except ld/plugin.c the target is abfd->xvec and with
ld/plugin.c the target isn't used. So this patch returns a cleanup
function from object_p instead, called in bfd_check_format_matches to
tidy the bfd before trying a different target match. The only cleanup
that does anything at this stage is the alpha-vms one.
bfd/
* targets.c (bfd_cleanup): New typedef.
(struct bfd <_bfd_check_format>): Return a bfd_cleanup.
* libbfd-in.h (_bfd_no_cleanup): Define.
* format.c (bfd_reinit): Add cleanup parameter, call it.
(bfd_check_format_matches): Set cleanup from _bfd_check_format
call and pass to bfd_reinit. Delete temp, use abfd->xvec instead.
* aout-target.h (callback, object_p): Return bfd_cleanup.
* aout-tic30.c (tic30_aout_callback, tic30_aout_object_p): Likewise.
* archive.c (bfd_generic_archive_p): Likewise.
* binary.c (binary_object_p): Likewise.
* coff-alpha.c (alpha_ecoff_object_p): Likewise.
* coff-ia64.c (ia64coff_object_p): Likewise.
* coff-rs6000.c (_bfd_xcoff_archive_p, rs6000coff_core_p): Likewise.
* coff-sh.c (coff_small_object_p): Likewise.
* coff-stgo32.c (go32_check_format): Likewise.
* coff64-rs6000.c (xcoff64_archive_p, rs6000coff_core_p),
(xcoff64_core_p): Likewise.
* coffgen.c (coff_real_object_p, coff_object_p): Likewise.
* elf-bfd.h (bfd_elf32_object_p, bfd_elf32_core_file_p),
(bfd_elf64_object_p, bfd_elf64_core_file_p): Likewise.
* elfcode.h (elf_object_p): Likewise.
* elfcore.h (elf_core_file_p): Likewise.
* i386msdos.c (msdos_object_p): Likewise.
* ihex.c (ihex_object_p): Likewise.
* libaout.h (some_aout_object_p): Likewise.
* libbfd-in.h (bfd_generic_archive_p, _bfd_dummy_target),
(_bfd_vms_lib_alpha_archive_p, _bfd_vms_lib_ia64_archive_p): Likewise.
* libbfd.c (_bfd_dummy_target): Likewise.
* libcoff-in.h (coff_object_p): Likewise.
* mach-o-aarch64.c (bfd_mach_o_arm64_object_p),
(bfd_mach_o_arm64_core_p): Likewise.
* mach-o-arm.c (bfd_mach_o_arm_object_p),
(bfd_mach_o_arm_core_p): Likewise.
* mach-o-i386.c (bfd_mach_o_i386_object_p),
(bfd_mach_o_i386_core_p): Likewise.
* mach-o-x86-64.c (bfd_mach_o_x86_64_object_p),
(bfd_mach_o_x86_64_core_p): Likewise.
* mach-o.c (bfd_mach_o_header_p, bfd_mach_o_gen_object_p),
(bfd_mach_o_gen_core_p, bfd_mach_o_fat_archive_p): Likewise.
* mach-o.h (bfd_mach_o_object_p, bfd_mach_o_core_p),
(bfd_mach_o_fat_archive_p, bfd_mach_o_header_p): Likewise.
* mmo.c (mmo_object_p): Likewise.
* pef.c (bfd_pef_object_p, bfd_pef_xlib_object_p): Likewise.
* peicode.h (coff_real_object_p, pe_ILF_object_p),
(pe_bfd_object_p): Likewise.
* plugin.c (ld_plugin_object_p, bfd_plugin_object_p): Likewise.
* ppcboot.c (ppcboot_object_p): Likewise.
* rs6000-core.c (rs6000coff_core_p): Likewise.
* som.c (som_object_setup, som_object_p): Likewise.
* srec.c (srec_object_p, symbolsrec_object_p): Likewise.
* tekhex.c (tekhex_object_p): Likewise.
* vms-alpha.c (alpha_vms_object_p): Likewise.
* vms-lib.c (_bfd_vms_lib_archive_p, _bfd_vms_lib_alpha_archive_p),
(_bfd_vms_lib_ia64_archive_p, _bfd_vms_lib_txt_archive_p): Likewise.
* wasm-module.c (wasm_object_p): Likewise.
* xsym.c (bfd_sym_object_p): Likewise.
* xsym.h (bfd_sym_object_p): Likewise.
* aoutx.h (some_aout_object_p): Likewise, and callback parameter
return type.
* pdp11.c (some_aout_object_p): Likewise.
* plugin.c (register_ld_plugin_object_p): Update object_p
parameter type.
* plugin.h (register_ld_plugin_object_p): Likewise.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.
ld/
* plugin.c (plugin_object_p): Return a bfd_cleanup.
(plugin_cleanup): New function.
Copy the no_export field to the IR dummy object when claiming an IR
object.
PR ld/25618
* plugin.c (plugin_object_p): Copy the no_export field to the IR
dummy object.
* testsuite/ld-plugin/lto.exp (lto_link_elf_tests): Add
PR ld/25618 tests.
* testsuite/ld-plugin/pr25618.d: New file.
* testsuite/ld-plugin/pr25618a.cc: Likewise.
* testsuite/ld-plugin/pr25618a.h: Likewise.
* testsuite/ld-plugin/pr25618b.cc: Likewise.
* testsuite/ld-plugin/pr25618b.h: Likewise.
This patch delays setting up DT_NEEDED dynamic tags until all object
files and libraries have been opened and their symbols processed,
rather than adding the tags while processing symbols. Tags are
ordered according to the position of the associated library on the
command line and linker scripts. It is still possible with
--as-needed libs that are mentioned more than once for tags to be
ordered according to which mention was needed. For example with
"--as-needed a.so b.so c.so b.so" when b.so is not needed by a.so or
any other prior object file but is needed by c.so, the order of tags
will be "A C B".
bfd/
PR 25593
* elf-bfd.h (struct elf_link_hash_table): Rename "loaded" to
"dyn_loaded".
(bfd_elf_add_dt_needed_tag): Declare.
* elf-strtab.c (_bfd_elf_strtab_restore): Handle NULL buf.
* elflink.c (bfd_elf_add_dt_needed_tag): Make global and rename
from elf_add_dt_needed_tag. Remove soname and doit param.
(elf_link_add_object_symbols): Don't use elf_add_dt_needed_tag
to see whether as-needed lib is already loaded, use dyn_loaded
list instead. When saving and restoring around as-needed lib
handle possibility that dynstr has not been initialised. Don't
add DT_NEEDED tags here. Limit dyn_loaded list to dynamic libs.
Mark libs loaded via DT_NEEDED entries of other libs with
DYN_NO_NEEDED if they should not be mentioned in DT_NEEDED of
the output.
(elf_link_check_versioned_symbol): Remove now unneccesary
DYNAMIC check when traversing dyn_loaded list.
ld/
PR 25593
* ldelf.c (ldelf_try_needed): Add DT_NEEDED lib to input_bfds.
(ldelf_after_open): Save state of input_bfds list before loading
DT_NEEDED libs. Traverse input_bfds list adding DT_NEEDED tags.
Restore input_bfds list.
* testsuite/ld-cris/gotplt1.d: Adjust for changed .dynstr order.
I closed this bug as invalid, but I think it is worth mentioning in NEWS
that older linkers didn't check PT_PHDR very well. The patch also allows
people to force an output file with --noinhibit-exec after the error.
bfd/
PR 25585
* elf.c (assign_file_positions_for_load_sections): Continue linking
on "PHDR segment not covered by LOAD segment" errors.
ld/
PR 25585
* NEWS: Mention better "PHDR segment not covered by LOAD segment"
checking.
GCC LTO wrapper is needed to extract real symbols from LTO IR objects.
This patch does the following:
1. Set up GCC LTO wrapper for each LTO IR object.
2. Run GCC LTO wrapper to get the real object.
3. Extract symbol info from the real object.
4. Cleanup afterwards.
bfd/
PR binutils/25355
* configure.ac (HAVE_EXECUTABLE_SUFFIX): New AC_DEFINE.
(EXECUTABLE_SUFFIX): Likewise.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c (bfd_plugin_close_and_cleanup): Removed.
(plugin_list_entry): Add all_symbols_read, cleanup_handler,
gcc, lto_wrapper, resolution_file, resolution_option, gcc_env,
real_bfd, real_nsyms, real_syms, lto_nsyms and lto_syms.
(get_lto_wrapper): New.
(setup_lto_wrapper_env): Likewise.
(current_plugin): Likewise.
(register_all_symbols_read): Likewise.
(register_cleanup): Likewise.
(get_symbols): Likewise.
(add_input_file): Likewise.
(bfd_plugin_close_and_cleanup): Likewise.
(claim_file): Removed.
(register_claim_file): Set current_plugin->claim_file.
(add_symbols): Make a copy of LTO symbols. Set lto_nsyms and
lto_syms in current_plugin.
(try_claim): Use current_plugin->claim_file. Call LTO plugin
all_symbols_read handler. Copy real symbols to plugin_data.
Call LTO plugin cleanup handler. Clean up for LTO wrapper.
(try_load_plugin): Don't reuse the previous plugin for LTO
wrapper. Set up GCC LTO wrapper if possible. Don't set
plugin_list_iter->claim_file.
(bfd_plugin_canonicalize_symtab): Use real LTO symbols if
possible.
* plugin.h (plugin_data_struct): Add real_bfd, real_nsyms and
real_syms.
ld/
PR binutils/25355
* testsuite/ld-plugin/lto.exp: Run PR binutils/25355 test.
* testsuite/ld-plugin/pr25355.c: New file.
* testsuite/ld-plugin/pr25355.d: Likewise.
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Support compile
only dump.
PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.
gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80. Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.
include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.
ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file
opcodes * z80-dis.c: Add support for GBZ80 opcodes.
__patchable_function_entries section is generated by a compiler with
-fpatchable-function-entry=XX. The assembly code looks like this:
---
.text
.globl _start
.type _start, %function
_start:
.section __patchable_function_entries,"aw",%progbits
.dc.a .LPFE1
.text
.LPFE1:
.byte 0
---
But --gc-sections will silently remove __patchable_function_entries
section and generate corrupt result. This patch disallows garbage
collection on __patchable_function_entries section without linked-to
section.
bfd/
PR ld/25490
* elflink.c (_bfd_elf_gc_mark_extra_sections): Issue an error
for garbage collection on __patchable_function_entries section
without linked-to section.
ld/
PR ld/25490
* testsuite/ld-elf/pr25490-1.d: New file.
* testsuite/ld-elf/pr25490-1.s: Likewise.
As shown in
https://sourceware.org/bugzilla/show_bug.cgi?id=25490
--gc-sections will silently remove __patchable_function_entries section
and generate corrupt result. This patch adds the section flag 'o' to
.section directive:
.section __patchable_function_entries,"awo",@progbits,foo
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat
.section __patchable_function_entries,"awo",@progbits,bar,unique,4
.section __patchable_function_entries,"awoG",@progbits,foo,foo,comdat,unique,1
which specifies the symbol name which the section references. Assmebler
will set its elf_linked_to_section to a local section where the symbol
is defined.
Linker is updated to call mark_hook if gc_mark of any of its linked-to
sections is set after all sections, except for backend specific ones,
have been garbage collected.
bfd/
PR gas/25381
* bfd-in2.h: Regenerated.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Call mark_hook
on section if gc_mark of any of its linked-to sections is set
and don't set gc_mark again.
* section.c (asection): Add linked_to_symbol_name to map_head
union.
gas/
PR gas/25381
* config/obj-elf.c (get_section): Also check
linked_to_symbol_name.
(obj_elf_change_section): Also set map_head.linked_to_symbol_name.
(obj_elf_parse_section_letters): Handle the 'o' flag.
(build_group_lists): Renamed to ...
(build_additional_section_info): This. Set elf_linked_to_section
from map_head.linked_to_symbol_name.
(elf_adjust_symtab): Updated.
* config/obj-elf.h (elf_section_match): Add linked_to_symbol_name.
* doc/as.texi: Document the 'o' flag.
* testsuite/gas/elf/elf.exp: Run PR gas/25381 tests.
* testsuite/gas/elf/section18.d: New file.
* testsuite/gas/elf/section18.s: Likewise.
* testsuite/gas/elf/section19.d: Likewise.
* testsuite/gas/elf/section19.s: Likewise.
* testsuite/gas/elf/section20.d: Likewise.
* testsuite/gas/elf/section20.s: Likewise.
* testsuite/gas/elf/section21.d: Likewise.
* testsuite/gas/elf/section21.l: Likewise.
* testsuite/gas/elf/section21.s: Likewise.
ld/
PR ld/24526
PR ld/25021
PR ld/25490
* testsuite/ld-elf/elf.exp: Run PR ld/25490 tests.
* testsuite/ld-elf/pr24526.d: New file.
* testsuite/ld-elf/pr24526.s: Likewise.
* testsuite/ld-elf/pr25021.d: Likewise.
* testsuite/ld-elf/pr25021.s: Likewise.
* testsuite/ld-elf/pr25490-2-16.rd: Likewise.
* testsuite/ld-elf/pr25490-2-32.rd: Likewise.
* testsuite/ld-elf/pr25490-2-64.rd: Likewise.
* testsuite/ld-elf/pr25490-2.s: Likewise.
* testsuite/ld-elf/pr25490-3-16.rd: Likewise.
* testsuite/ld-elf/pr25490-3-32.rd: Likewise.
* testsuite/ld-elf/pr25490-3-64.rd: Likewise.
* testsuite/ld-elf/pr25490-3.s: Likewise.
* testsuite/ld-elf/pr25490-4-16.rd: Likewise.
* testsuite/ld-elf/pr25490-4-32.rd: Likewise.
* testsuite/ld-elf/pr25490-4-64.rd: Likewise.
* testsuite/ld-elf/pr25490-4.s: Likewise.
* testsuite/ld-elf/pr25490-5-16.rd: Likewise.
* testsuite/ld-elf/pr25490-5-32.rd: Likewise.
* testsuite/ld-elf/pr25490-5-64.rd: Likewise.
* testsuite/ld-elf/pr25490-5.s: Likewise.
* testsuite/ld-elf/pr25490-6-16.rd: Likewise.
* testsuite/ld-elf/pr25490-6-32.rd: Likewise.
* testsuite/ld-elf/pr25490-6-64.rd: Likewise.
* testsuite/ld-elf/pr25490-6.s: Likewise.
With the addition of section16 tests we have multiple tests
advertising themselves as "mbind sections" and "mbind section
contents". This patch fixes that, and fails on quite a few targets
that force an OSABI value. It's a pain specifying all the relevant
arm targets on an xfail line, so I wrote supports_gnu_osabi.
binutils/
* testsuite/lib/binutils-common.exp (match_target): Accept '!' before
TCL procedure.
(supports_gnu_osabi): New procedure.
(is_generic): New, from ld-lib.exp.
(supports_gnu_unique): Use the above.
gas/
* testsuite/gas/elf/section12a.d: Use supports_gnu_osabi in
xfail, and rename test.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
ld/
* testsuite/lib/ld-lib.exp (is_generic): Delete.
* testsuite/ld-unique/unique.exp: Exclude tic6x.
i386-moss is an ELF target needing ldelf.c. x86 openbsd wouldn't even
build, so I added entries to do the same as netbsd. Quite likely this
isn't ideal but if the openbsd folk don't contribute their changes
this is what they get.
* configure.tgt (i[3-7]86-*-moss*): Don't clear targ_extra_ofiles.
(i[3-7]86-*-openbsd*, x86_64-*-openbsd*): Add.
Clang's integrated assembler supports multiple section with the same
name:
.section .text,"ax",@progbits,unique,1
nop
.section .text,"ax",@progbits,unique,2
nop
"unique,N" assigns the number, N, as the section ID, to a section. The
valid values of the section ID are between 0 and 4294967295. It can be
used to distinguish different sections with the same section name.
This is useful with -fno-unique-section-names -ffunction-sections.
-ffunction-sections by default generates .text.foo, .text.bar, etc.
Using the same string can save lots of space in .strtab.
This patch adds section_id to bfd_section and reuses the linker
internal bit in BFD section flags, SEC_LINKER_CREATED, for assmebler
internal use to mark valid section_id. It also updates objdump to
compare section pointers if 2 sections comes from the same file since
2 different sections can have the same section name.
bfd/
PR gas/25380
* bfd-in2.h: Regenerated.
* ecoff.c (bfd_debug_section): Add section_id.
* section.c (bfd_section): Add section_id.
(SEC_ASSEMBLER_SECTION_ID): New.
(BFD_FAKE_SECTION): Add section_id.
binutils/
PR gas/25380
* objdump.c (sym_ok): Return FALSE if 2 sections are in the
same file with different section pointers.
gas/
PR gas/25380
* config/obj-elf.c (section_match): Removed.
(get_section): Also match SEC_ASSEMBLER_SECTION_ID and
section_id.
(obj_elf_change_section): Replace info and group_name arguments
with match_p. Also update the section ID and flags from match_p.
(obj_elf_section): Handle "unique,N". Update call to
obj_elf_change_section.
* config/obj-elf.h (elf_section_match): New.
(obj_elf_change_section): Updated.
* config/tc-arm.c (start_unwind_section): Update call to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texi: Document "unique,N" in .section directive.
* testsuite/gas/elf/elf.exp: Run "unique,N" tests.
* testsuite/gas/elf/section15.d: New file.
* testsuite/gas/elf/section15.s: Likewise.
* testsuite/gas/elf/section16.s: Likewise.
* testsuite/gas/elf/section16a.d: Likewise.
* testsuite/gas/elf/section16b.d: Likewise.
* testsuite/gas/elf/section17.d: Likewise.
* testsuite/gas/elf/section17.l: Likewise.
* testsuite/gas/elf/section17.s: Likewise.
* testsuite/gas/i386/unique.d: Likewise.
* testsuite/gas/i386/unique.s: Likewise.
* testsuite/gas/i386/x86-64-unique.d: Likewise.
* testsuite/gas/i386/i386.exp: Run unique and x86-64-unique.
ld/
PR gas/25380
* testsuite/ld-i386/pr22001-1c.S: Use "unique,N" in .section
directives.
* testsuite/ld-i386/tls-gd1.S: Likewise.
* testsuite/ld-x86-64/pr21481b.S: Likewise.
Commit 9e7028aa1e ("PowerPC64 __tls_get_addr_desc") introduced a use
of @option which apparently newer makeinfo tolerates, but older ones
reject. Drop the unnecessary (a per all other uses of @option) blank.
This provides a linker generated __tls_get_addr_desc wrapper function
preserving registers around a __tls_get_addr call. The idea being to
support __tls_get_addr_desc without requiring a glibc update.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_group.
(ppc64_elf_archive_symbol_lookup): Extract __tls_get_addr_opt for
__tls_get_addr_desc.
(ppc64_elf_size_stubs): Add section for linker generated
__tls_get_addr_desc wrapper function. Loop at least once if
generating this function.
(emit_tga_desc, emit_tga_desc_eh_frame): New functions.
(ppc64_elf_build_stubs): Generate __tls_get_addr_desc.
ld/
* testsuite/ld-powerpc/tlsdesc3.d,
* testsuite/ld-powerpc/tlsdesc3.wf,
* testsuite/ld-powerpc/tlsdesc4.d,
* testsuite/ld-powerpc/tlsdesc4.s,
* testsuite/ld-powerpc/tlsdesc4.wf: New tests.
* testsuite/ld-powerpc/powerpc.exp: Run them.
This implements register saving and restoring in the __tls_get_addr
call stub, so that when glibc supports the optimized tls call stub gcc
can generate code that assumes only r0, r12 and of course r3 are
changed on a __tls_get_addr call. When gcc expects __tls_get_addr
calls to preserve registers the call will be to __tls_get_addr_desc,
which will be translated by the linker to a call to __tls_get_addr_opt.
bfd/
* elf64-ppc.h (struct ppc64_elf_params): Add no_tls_get_addr_regsave.
* elf64-ppc.c (struct ppc_link_hash_table): Add tga_desc and
tga_desc_fd.
(is_tls_get_addr): Match tga_desc and tga_desc_df too.
(STDU_R1_0R1, ADDI_R1_R1): Define.
(tls_get_addr_prologue, tls_get_addr_epilogue): New functions.
(ppc64_elf_tls_setup): Set up tga_desc and tga_desc_fd. Indirect
tga_desc_fd to opt_fd, and tga_desc to opt. Set
no_tls_get_addr_regsave.
(branch_reloc_hash_match): Add hash3 and hash4.
(ppc64_elf_tls_optimize): Handle tga_desc_fd and tga_desc too.
(ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_relocate_section): Likewise.
(plt_stub_size, build_plt_stub): Likewise. Size regsave
__tls_get_addr stub.
(build_tls_get_addr_stub): Build regsave __tls_get_addr stub and
eh_frame.
(ppc_size_one_stub): Handle tga_desc_fd and tga_desc too. Size
eh_frame for regsave __tls_get_addr.
gas/
* config/tc-ppc.c (parse_tls_arg): Handle tls arg for
__tls_get_addr_desc and __tls_get_addr_opt.
ld/
* emultempl/ppc64elf.em (ppc64_opt, PARSE_AND_LIST_LONGOPTS),
(PARSE_AND_LIST_OPTIONS, PARSE_AND_LIST_ARGS_CASES): Support
--tls-get-addr-regsave and --no-tls-get-addr-regsave.
(params): Init new field.
* ld.texi (--tls-get-addr-regsave, --no-tls-get-addr-regsave):
Document.
* testsuite/ld-powerpc/tlsdesc.s,
* testsuite/ld-powerpc/tlsdesc.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsexenors.d,
* testsuite/ld-powerpc/tlsexenors.r,
* testsuite/ld-powerpc/tlsexers.d,
* testsuite/ld-powerpc/tlsexers.r,
* testsuite/ld-powerpc/tlsexetocnors.d,
* testsuite/ld-powerpc/tlsexetocrs.d,
* testsuite/ld-powerpc/tlsexetocrs.r,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: New.
* testsuite/ld-powerpc/powerpc.exp: Run new tests.
This modifies the special __tls_get_addr stub that checks for a
tlsdesc style __tls_index entry and returns early. Not using r11
isn't much benefit at the moment but a followup patch will preserve
regs around the first call to __tls_get_addr when the __tls_index
entry isn't yet set up for an early return.
bfd/
* elf64-ppc.c (LD_R11_0R3, CMPDI_R11_0, STD_R11_0R1, LD_R11_0R1),
(MTLR_R11): Don't define.
(LD_R0_0R3, CMPDI_R0_0): Define.
(build_tls_get_addr_stub): Don't use r11 in stub.
ld/
* testsuite/ld-powerpc/tlsexe.d: Match new __tls_get_addr stub.
* testsuite/ld-powerpc/tlsexeno.d: Likewise.
* testsuite/ld-powerpc/tlsexetoc.d: Likewise.
* testsuite/ld-powerpc/tlsexetocno.d: Likewise.
* testsuite/ld-powerpc/tlsopt5.d: Likewise.
ld/ChangeLog
* testsuite/ld-x86-64/align-branch-1.d: Loosen instruction regexps
to admit whatever absolute address. The label-relative address is
what the test needs to verify.
ld/ChangeLog:
2020-01-16 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* scripttempl/elf32msp430.sc: Add input section rules for
.upper.{text,data,rodata,bss}.
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/upper-input-sections.s: New test.
gas/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/tc-msp430.c (CHECK_RELOC_MSP430): Always generate 430X
relocations when the target is 430X, except when extracting part of an
expression.
(msp430_srcoperand): Adjust comment.
Initialize the expp member of the msp430_operand_s struct as
appropriate.
(msp430_dstoperand): Likewise.
* testsuite/gas/msp430/msp430.exp: Run new test.
* testsuite/gas/msp430/reloc-lo-430x.d: New test.
* testsuite/gas/msp430/reloc-lo-430x.s: New test.
include/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* opcode/msp430.h (enum msp430_expp_e): New.
(struct msp430_operand_s): Add expp member to struct.
ld/ChangeLog:
2020-01-15 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new test.
* testsuite/ld-msp430-elf/reloc-lo-430x.s: New test.
Function symbols of course don't normally want .dynbss copies but
with some old versions of gcc they are needed to copy the function
descriptor. This patch restricts the cases where they are useful to
compilers using dot-symbols, and enables the warning regardless of
whether a PLT entry is emitted in the executable. PLTs in shared
libraries are affected by a .dynbss copy in the executable.
bfd/
PR 25384
* elf64-ppc.c (ELIMINATE_COPY_RELOCS): Update comment.
(ppc64_elf_adjust_dynamic_symbol): Don't allow .dynbss copies
of function symbols unless dot symbols are present. Do warn
whenever one is created, regardles of whether a PLT entry is
also emitted for the function symbol.
ld/
* testsuite/ld-powerpc/ambiguousv1b.d: Adjust expected output.
* testsuite/ld-powerpc/funref.s: Align func_tab.
* testsuite/ld-powerpc/funref2.s: Likewise.
* testsuite/ld-powerpc/funv1.s: Add dot symbols.
