2
0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-03 04:12:10 +08:00
Commit Graph

289 Commits

Author SHA1 Message Date
Mark Kettenis
89cf478729 * configure.tgt (sparc-*openbsd): Remove entry accidentially
checked in with last change.
2002-05-12 15:07:41 +00:00
Mark Kettenis
1f77ffc533 * configure.tgt (i[3456]86-*-unixware*, i[3456]86-*-unixware2*):
Remove targets.  These are canonicalized to i386-*-sysv4.2uw by
config.sub.
2002-05-12 14:58:56 +00:00
Jason Thorpe
13a38d4599 * NEWS: Note new sh*-*-netbsdelf* configuration.
* configure.host: Set gdb_host_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New host.
* configure.tgt: Set gdb_target_cpu to sh for all sh*.
(sh*-*-netbsdelf*): New target.
* sh-nbsd-nat.c: New file.
* sh-nbsd-tdep.c: New file.
* sh-nbsd-tdep.h: New file.
* config/sh/nbsd.mh: New file.
* config/sh/nbsd.mt: New file.
* config/sh/nm-nbsd.h: New file.
* config/sh/tm-nbsd.h: New file.
2002-05-08 15:29:36 +00:00
Andrew Cagney
cd9bfe1540 * MAINTAINERS: Mark a29k as deleted.
* NEWS: Mention that a29k was removed.  Add OBSOLETE section.
Move new configurations to the top.
* configure.tgt: Remove a29k.
* config/a29k/tm-vx29k.h: Delete.
* config/a29k/vx29k.mt: Delete.
* config/a29k/tm-a29k.h: Delete.
* config/a29k/a29k-udi.mt: Delete.
* config/a29k/a29k.mt: Delete.
* a29k-tdep.c: Delete.
* remote-udi.c: Delete.
* remote-mm.c: Delete.
* remote-eb.c: Delete.
* remote-adapt.c: Delete.
* Makefile.in: Remove obsolete code.
* gdbserver/Makefile.in: Ditto.
* config/s390/s390x.mt: Ditto.
* config/s390/s390.mt: Ditto.
* config/sparc/sparclynx.mh: Ditto.
* config/sparc/linux.mh: Ditto.
* config/pa/hppaosf.mh: Ditto.
* config/pa/hppabsd.mh: Ditto.
* config/ns32k/nbsd.mt: Ditto.
* config/mips/vr5000.mt: Ditto.
* config/m68k/sun3os4.mh: Ditto.
* config/m68k/nbsd.mt: Ditto.
* config/m68k/m68klynx.mh: Ditto.
* config/m32r/m32r.mt: Ditto.
* config/i386/x86-64linux.mt: Ditto.
* config/i386/nbsdelf.mt: Ditto.
* config/i386/nbsd.mt: Ditto.
* config/i386/i386lynx.mh: Ditto.
2002-05-04 15:52:42 +00:00
Theodore A. Roth
8818c391f7 * Makefile.in: Add support for AVR target.
* configure.tgt: Add support for AVR target.
* avr-tdep.c: New file
* config/avr/avr.mt: New file.
2002-04-25 20:34:56 +00:00
Jason Thorpe
da8ca43db6 * Makefile.in (ALLDEPFILES): Add alphanbsd-nat.c and
alphanbsd-tdep.c.
(alphanbsd-nat.o): New dependency list.
(alphanbsd-tdep.o): Ditto.
* NEWS: Note new native NetBSD/alpha configuration.
* alphanbsd-nat.c: New file.
* alphanbsd-tdep.c: Ditto.
* configure.host (alpha*-*-netbsd*): New host.
* configure.tgt (alpha*-*-netbsd*): New target.
* config/alpha/nbsd.mh: New file.
* config/alpha/nbsd.mt: Ditto.
* config/alpha/nm-nbsd.h: Ditto.
* config/alpha/tm-nbsd.h: Ditto.
2002-04-25 02:44:05 +00:00
David O'Brien
54394ac39e 2002-03-01 David O'Brien <obrien@FreeBSD.org>
* configure.host (sparc64-*-freebsd): Add.
	* configure.tgt: Likewise.
	* config/sparc/fbsd.mh: New file.
	* config/sparc/fbsd.mt: Likewise.
	* config/sparc/nm-fbsd.h: Likewise.
	* config/sparc/tm-fbsd.h: Likewise.
2002-03-01 18:35:24 +00:00
Daniel Jacobowitz
265f716b73 2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/linux-s390-low.c: New file.
        * regformats/reg-s390.dat: New file.
        * regformats/reg-s390x.dat: New file.
        * gdbserver/configure.srv: Add S/390.
        * gdbserver/Makefile.in: Add S/390.
        * configure.tgt: Enable gdbserver for S/390.
2002-02-28 16:58:15 +00:00
Daniel Jacobowitz
58caa3dcdb 2002-02-27 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/acconfig.h: New file.
        * gdbserver/i387-fp.c: New file.
        * gdbserver/i387-fp.h: New file.
        * gdbserver/linux-x86-64.c: New file.
        * regformats/reg-x86-64.dat: New file.
        * configure.tgt: Add x86_64-*-linux* gdbserver support.
        & gdbserver/configure.srv: Add x86_64-*-linux* and regset support.
        * gdbserver/configure.in: Add support for regsets.
        * gdbserver/config.in: Regenerate.
        * gdbserver/configure: Regenerate.
        * gdbserver/Makefile.in: Likewise.  Add $(linux_low_h).
        * gdbserver/linux-low.h: New file.
        * gdbserver/linux-low.c: Include "linux-low.h".  Add support
        for regsets.
        * gdbserver/linux-arm-low.c: Include "linux-low.h".
        * gdbserver/linux-ia64-low.c: Include "linux-low.h".
        * gdbserver/linux-m68k-low.c: Include "linux-low.h".
        * gdbserver/linux-mips-low.c: Include "linux-low.h".
        * gdbserver/linux-ppc-low.c: Include "linux-low.h".
        * gdbserver/linux-sh-low.c: Include "linux-low.h".
        * gdbserver/linux-i386-low.c: Include "linux-low.h".  Include
        "i387-fp.h".  Add PTRACE_GETREGS and friends.
        * gdbserver/regcache.c (supply_register): New function.
        (supply_register_by_name): New function.
        (collect_register): New function.
        (collect_register_by_name): New function.
2002-02-27 07:07:49 +00:00
Richard Earnshaw
93247f887c * configure.tgt (arm*-*-netbsd*): This variant is now fully multi-arch.
* config/arm/nbsd.mt (TM_FILE): Delete.
* config/arm/tm-nbsd.h: Delete.
2002-02-19 14:04:47 +00:00
Daniel Jacobowitz
a85f51e7ac 2002-02-14 Daniel Jacobowitz <drow@mvista.com>
* configure.tgt: Configure gdbserver only for known working
        targets.  Set ${build_gdbserver} instead of modifying ${configdirs}.
        * configure.in: Check ${build_gdbserver}.  Put gdbserver/ into
        SUBDIRS if it is configured.  Update comment for ${nativefile}.
        * configure: Regenerated.
2002-02-14 05:31:46 +00:00
Alexandre Oliva
ea87b71bed * configure.host: Accept sparcv9 as alias for sparc64.
* configure.tgt: Likewise.
2002-01-24 02:48:04 +00:00
Andreas Jaeger
abf22e64b8 2002-01-20 Jiri Smid <smid@suse.cz>
* configure.host, configure.tgt: Support x86-64.
	* NEWS: Note new target x86-64.
2002-01-20 09:10:27 +00:00
Andrew Cagney
f015b2e7fc Mark all 29k targets as obsolete (second attempt to commit this). 2002-01-15 01:52:37 +00:00
Andrew Cagney
a752853e6e Remove obsolete MacOS support. 2002-01-05 05:54:31 +00:00
Orjan Friberg
dbbff68389 2001-12-21 Orjan Friberg <orjanf@axis.com>
* configure.tgt: Delete CRIS from multi-arch targets.

	* config/cris/tm-cris.h: New file.

	* config/cris/cris.mt (TDEPFILES): Add corelow.o solib.o solib-svr4.o.
	(TM_FILE): New macro.

	* cris-tdep.c (cris_examine): Correct check for srp register.
	(supply_gregset, fetch_core_registers,
	cris_linux_svr4_fetch_link_map_offsets, cris_fpless_backtrace):
	New functions.
	(_initialize_cris_tdep): Add core functions and new command.
	(cris_gdbarch_init): Define link map offsets.
2001-12-21 09:53:58 +00:00
Fernando Nasser
e7a42bc893 2001-12-17 Fernando Nasser <fnasser@redhat.com>
From Richard Earnshaw <rearnsha@arm.com>:
        * config/arm/nbsd.mh, config/arm/nbsd.mt, config/arm/tm-nbsd.h,
        config/arm/nm-nbsd.h, config/arm/xm-nbsd.h: New files.
        * armbsd-nat.c: New file.
        * Makefile.in: Build it.
        * configure.host, configure.tgt: Support NetBSD/arm.
2001-12-17 16:23:02 +00:00
Corinna Vinschen
0c884e1782 * Makefile.in: Add support for xstormy16.
* configure.tgt: Ditto.
	* xstormy16-tdep.c: New file.
	* config/xstormy16/xstormy16.mt: New file.
2001-12-13 13:34:41 +00:00
Andrew Cagney
3680c63822 Zap sony news (m68k) and ISI (m68k) targets. 2001-12-01 23:06:47 +00:00
Andrew Cagney
9b56715048 Zap the ultra series of a29k host and target. 2001-12-01 22:34:11 +00:00
Andrew Cagney
7e24f0b11e Zap Sun's i386i. 2001-12-01 22:19:30 +00:00
Andrew Cagney
1406caf7ab Zap all but ns32k-netbsd NS32k targets and hosts. 2001-12-01 22:02:03 +00:00
Andrew Cagney
5e734e1f9d Zap harris target and host. 2001-12-01 21:11:41 +00:00
Andrew Cagney
7768dd6c95 Zap some older PPC targets. 2001-12-01 21:01:58 +00:00
Andrew Cagney
7bc65f05b2 Zap a29k. 2001-12-01 19:34:37 +00:00
Andrew Cagney
e2caac1894 Delete tic80 target. 2001-12-01 19:10:00 +00:00
Mark Kettenis
eb7cedd985 Add x86 OpenBSD native configuration.
* config/i386/obsd.mt, config/i386/tm-obsd.h, config/i386/obsd.mh,
config/i386/nm-obsd.h: New files.
* configure.host (i[3456]86-*-openbsd*): New host.
* configure.tgt (i[3456]86-*-openbsd*): New target.
* NEWS: Update.
2001-11-23 23:01:54 +00:00
Andrew Cagney
6ca173e32c * config/mn10300/mn10300.mt (TM_FILE): Delete.
* configure.tgt: Add mn10300 to list of mulit-arch targets.
* config/mn10300/tm-mn10300.h: Delete file. Move contents ...
* mn10300-tdep.c: To here.
2001-08-12 03:39:11 +00:00
Andrew Cagney
b4fc7a3068 * configure.tgt (i*86-*-pe*): New target. 2001-07-19 05:10:38 +00:00
Orjan Friberg
291349806f 2001-07-16 Orjan Friberg <orjanf@axis.com>
* configure.tgt: Recognise the CRIS architecture.
	* config/cris/cris.mt: New file for CRIS target.
	* cris-tdep.c: New file for CRIS target.
2001-07-16 08:52:41 +00:00
Andrew Cagney
216246961f * configure.tgt: Mark d10v as pure multi-arch.
* config/d10v/tm-d10v.h: Delete file.
* config/d10v/d10v.mt (TM_FILE): Delete.
2001-07-11 17:58:15 +00:00
Daniel Jacobowitz
2aa830e4a6 MIPS/Linux support 2001-07-10 20:41:54 +00:00
Andrew Cagney
4009c67702 Recognise the s390 host and target. 2001-06-15 19:23:45 +00:00
Eli Zaretskii
1d06468c1f * config/mips/tm-irix6.h: New file.
* config/mips/irix6.mh: New file.

	* config/mips/irix6.mt: New file.

	* config/mips/xm-irix6.h: New file.

	* config/mips/nm-irix6.h: New file.

	* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
	disassembler info in tm_print_insn_info as appropriate for the N32
	ABI.  Force N32 ABI to be the default if the CPU is R8000 or
	R10000.

	* configure.tgt (mips*-sgi-irix6*): Map to irix6.

	* configure.host (mips*-sgi-irix6*): Ditto.
2001-06-07 15:57:57 +00:00
Andrew Cagney
514e603dc0 Obsolete NEWS and ISI systems (along with a few redundant m68k targets). 2001-04-17 21:20:49 +00:00
Andrew Cagney
24f89b6880 Obsolete sun386i. 2001-04-11 22:39:07 +00:00
Andrew Cagney
1b2b2c1600 Obsolete powerpcle-*-cygwin* and powerpcle-*-solaris* platforms
and powerpc-*-netware* target.
2001-04-06 16:25:22 +00:00
Andrew Cagney
4a1968f494 Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets. 2001-04-05 14:49:29 +00:00
Andrew Cagney
76f4ea5303 Obsolete w65-*-* target. 2001-04-03 21:56:01 +00:00
Andrew Cagney
52071915c8 Obsolete tic80. 2001-04-03 21:14:37 +00:00
Andrew Cagney
bb19ff3b14 Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and
ns32k-utek-*.
2001-04-02 20:57:26 +00:00
Andrew Cagney
1b59432770 Obsolete harris 88k target. 2001-03-09 03:56:03 +00:00
Kevin Buettner
596c9d4b8f Configury changes for AIX5/IA-64. 2001-03-06 00:52:31 +00:00
Andrew Cagney
86168def62 * config/sparc/sp64linux.mt: New file.
* configure.tgt: Recognize sparc64-*-linux* as a sp64linux target.
* configure.host: Recognize sparc64-*-linux* as a linux host.
From 2000-03-17 Jakub Jelinek <jakub@redhat.com>:
* config/sparc/tm-sp64linux.h: New file.
2001-02-27 17:04:47 +00:00
Andrew Cagney
7fcca85b94 Remove configurations marked as obsolete in 5.0. 2001-02-08 06:30:25 +00:00
J.T. Conklin
10214f55f8 * configure/sh/embed.mt: New file.
* configure/sh/linux.mt: New file.
* configure/sh/sh.mt: Removed.
* configure.tgt (sh-*-hms,sh-*-coff*,sh-*-elf*,sh-*-linux): New targets.
(sh-*-*): Removed.
2001-01-30 23:37:07 +00:00
J.T. Conklin
6477a14af7 * configure.tgt (hppa*-*-bsd*, hppa*-*-osf*, m68*-*-sunos4*,
rs6000-*-lynxos*, sparc-*-sunos4*): Add gdbserver to configdirs.
2000-12-14 20:15:45 +00:00
J.T. Conklin
bd2fa4f6c9 * gdbserver/low-hppabsd.c (buf2, environ, quit, quit_flag):
Removed unused variables and declarations.
* gdbserver/low-linux.c (buf2, environ, query, quit, quit_flag):
Likewise.
* gdbserver/low-nbsd.c (buf2, environ, quit, quit_flag):
Likewise.
* gdbserver/low-sparc.c (buf2, environ, query, quit, quit_flag):
Likewise.
* gdbserver/low-sun.c (buf2, environ, query, quit, quit_flag):
Likewise.

* gdbserver/low-hppabsd.c, gdbserver/low-linux.c,
gdbserver/low-nbsd.c, gdbserver/low-sparc.c, gdbserver/low-sun3.c
(create_inferior): Update comment.

* gdbserver/low-nbsd.c (initialize_arch, fetch_inferior_registers,
store_inferior_registers): Provide implementations for the m68k
and ns32k.
* config/m68k/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
* config/ns32k/nbsd.mt (GDBSERVER_DEPFILES): Likewise.
* configure.tgt (m68*-*-netbsd*, ns32k-*-netbsd*): Add gdbserver
to configdirs.
-------------------------------------------------------------------
2000-12-08 19:46:08 +00:00
Nick Clifton
7cf6486b83 Add support for configuring an xscale atrget 2000-11-26 20:04:41 +00:00
Andrew Cagney
78073dd899 From 2000-06-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>:
* configure.tgt: Recognize the 68hc11.
* m68hc11-tdep.c: New file for 68hc11 target.
* config/m68hc11/m68hc11.mt: New file for 68hc11 port.

* configure.tgt: When 68hc11, set gdb_multi_arch.
2000-07-27 07:18:32 +00:00
Jeff Law
5ec846f9cf * configure.host (hppa*64*): Renamed from hppa2.0w per
gcc/binutils changes.
        * configure.tgt: Similarly.
2000-06-13 15:21:27 +00:00
J.T. Conklin
b0cb5b8de2 * configure.tgt: Add pattern for i[3456]86-*-netbsdelf*.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.

* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
2000-06-02 23:15:28 +00:00
Mark Kettenis
59c948892b * configure.host, configure.tgt (alpha*-*-freebsd*): New entry. 2000-05-31 20:54:55 +00:00
J.T. Conklin
9cebe72f24 * config/i386/nbsd.mt (TDEPFILES): Move solib.o from here...
* config/i386/nbsd.mh (NATDEPFILES): ...to here.
* config/m68k/nbsd.mt (TDEPFILES): Move solib.o from here...
* config/m68k/nbsd.mh (NATDEPFILES): ...to here.
* config/ns32k/nbsd.mt (TDEPFILES): Move solib.o from here...
* config/ns32k/nbsd.mh (NATDEPFILES): ...to here.

* config/powerpc/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o.
* configure.tgt (powerpc-*-netbsd*): add gdbserver to configdirs.
* gdbserver/low-nbsd.c (initialize_arch): Define for PPC.
(fetch_inferior_registers): Likewise.
(store_inferior_registers): Likewise.

* gdbserver/low-nbsd.c (fetch_inferior_registers): Handle X86
floating point registers.
(store_inferior_registers): Likewise.
-------------------------------------------------------------------
2000-05-24 04:16:28 +00:00
J.T. Conklin
e42180d7b4 * configure.host, configure.tgt (powerpc-*-netbsd*): New entry.
* config/powerpc/nbsd.mh, config/powerpc/nbsd.mt,
config/powerpc/tm-nbsd.h, config/powerpc/nm-nbsd.h,
config/powerpc/xm-nbsd.h: New files.
2000-05-18 23:43:58 +00:00
Stan Shebs
5330533d30 Remove obsolete Gould configuration:
* configure.host, configure.tgt: Remove Gould configs.
	* Makefile.in: Remove Gould-related actions.
	* gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
	* NEWS: Mention removal.
2000-05-01 16:12:10 +00:00
Scott Bambrough
41c49b06c4 Changes to support core files and linux threads.
2000-04-20  Scott Bambrough <scottb@netwinder.org>

	* arm-linux-nat.c (PIDGET, TIDGET): New.
	(get_thread_id, GET_THREAD_ID): New.
	(fetch_nwfpe_register, store_nwfpe_register): New.
	(fetch_register, store_register): New.
	(fetch_fpregister, store_fpregister): New.
	(fill_gregset, supply_gregset): New.
	(fill_fpregset, supply_fpregset): New.
	(fetch_fpregs): Modified to use thread id's.
	(store_fpregs): Modified to use thread id's and
	fetch_nwfpe_register.
	(fetch_regs): Modified to use thread id's.
	(store_regs): Modified to use thread id's.
	(fetch_inferior_registers): Modified to handle single register
	fetches.
	(store_inferior_registers): Modified to handle single register
	stores.
	(arm_linux_register_u_addr): Removed.

	* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.

	* config/arm/linux.mh
	(NATDEPFILES): Removed core-aout.o.  Added core-regset.o.
	(LOADLIBES): Define.

	* config/arm/nm-linux.h: Include config/nm-linux.h.
	(ATTACH_DETACH): Removed.  Defined in config/nm-linux.h.
	(REGISTER_U_ADDR): Removed.
	(SVR4_SHARED_LIBS): Removed.  Defined in config/nm-linux.h.
	(#include "solib.h"): Removed.  Included via config/nm-linux.h.
2000-04-20 21:13:19 +00:00
Kevin Buettner
eafb830164 IA-64 changes. 2000-03-21 05:26:31 +00:00
Christopher Faylor
091be84d73 * configure.tgt: Add arm, mips, sh wince targets.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
2000-02-24 03:31:45 +00:00
Kevin Buettner
2559291b00 Changes for GNU/Linux PPC native port. 2000-02-22 01:17:29 +00:00
Jim Kingdon
d6e9fb0513 2000-02-10 J.T. Conklin <jtc@redback.com>
* config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
	* configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
 	configdirs.
	* gdbserver/low-nbsd.c: New file.

	* gdbserver/Makefile.in: convert to autoconf.
	* gdbserver/configure.in: likewise.
	* gdbserver/configure: generate.
2000-02-13 01:06:58 +00:00
Jason Molenda
0fda6bd286 import gdb-2000-01-24 snapshot 2000-01-25 02:40:50 +00:00
Jason Molenda
0d06e24ba7 import gdb-2000-01-10 snapshot 2000-01-11 03:07:37 +00:00
Jason Molenda
ed9a39ebf9 import gdb-1999-12-21 snapshot 1999-12-22 21:45:38 +00:00
Jason Molenda
c2d11a7da0 import gdb-1999-12-06 snapshot 1999-12-07 03:56:43 +00:00
Jason Molenda
2acceee218 import gdb-1999-10-04 snapshot 1999-10-05 23:13:56 +00:00
Jason Molenda
104c1213b4 import gdb-1999-08-30 snapshot 1999-08-31 01:14:27 +00:00
Jason Molenda
7be570e7ce import gdb-1999-08-16 snapshot 1999-08-16 19:57:19 +00:00
Jason Molenda
96baa820df import gdb-1999-08-09 snapshot 1999-08-09 21:36:23 +00:00
Jason Molenda
adf40b2e16 import gdb-1999-07-19 snapshot 1999-07-19 23:30:11 +00:00
Jason Molenda
43e526b9b4 import gdb-1999-07-12 snapshot 1999-07-12 11:15:22 +00:00
Jason Molenda
9846de1bb5 import gdb-1999-07-07 pre reformat 1999-07-07 17:31:57 +00:00
Jason Molenda
085dd6e638 import gdb-1999-06-28 snapshot 1999-06-28 16:06:02 +00:00
Jason Molenda
cce74817d9 import gdb-1999-06-07 snapshot 1999-06-07 19:19:32 +00:00
Stan Shebs
7a292a7adf import gdb-19990422 snapshot 1999-04-26 18:34:20 +00:00
Stan Shebs
c906108c21 Initial creation of sourceware repository 1999-04-16 01:35:26 +00:00
Stan Shebs
071ea11e85 Initial creation of sourceware repository 1999-04-16 01:34:07 +00:00
Stan Shebs
baf6de2ed9 Declare Gould configuration obsolete:
* configure.host, configure.tgt: Comment out Gould configs.
	* Makefile.in: Comment out Gould-related actions.
	* gould-xdep.c, gould-tdep.c, config/gould/*: Comment out.
	* NEWS: Mention obsolete status.
And the first one bites the dust...
1999-02-10 21:28:03 +00:00
Nick Clifton
5510d6a1c7 Add support for StrongARM host/target. 1999-02-08 17:07:07 +00:00
Stan Shebs
31bcf8905f * configure.tgt (v850): Add wildcard to match.
Also remove sanitization for v850e and ea.
1999-01-29 23:39:40 +00:00
Andrew Cagney
06cf5a79dd Rename vr4100 (vr4xxx) config files to vr4100.
Rename vr4xxx (vr4300) config files to vr4xxx.
Enable GDB_MULTI_ARCH in tm-vr4xxx.h
1998-12-16 15:36:29 +00:00
Edith Epstein
1994dc7cfc Tue Dec 8 15:09:44 1998 Edith Epstein <eepstein@sophia.cygnus.com>
* config/m68k/tm-m68k.h (NUM_FREGS): m68k-linux patch.
          Added NUM_FREGS macro.

        * config/m68k/xm-linux.h: m68k-linux patch. New file.

        * config/m68k/tm-linux.h: m68k-linux patch. New file.

        * config/m68k/nm-linux.h: m68k-linux patch. New file.

        * config/m68k/linux.mt: m68k-linux patch. New file.

        * config/m68k/linux.mh: m68k-linux patch. New file.

        * gdbserver/low-linux.c: m68k-linux patch. Added an ifdef
          that checks the value of __GLIBC to decide whether or
          not to include sys/reg.h.

        * m68klinux-nat.c: m68k-linux patch. New file. Note
          both m68k-tdep.c and m68klinux-nat.c contain definitions
          for supply_gregset and supply_fpregset. The definitions
          in m68k-tdep.c are valid is USE_PROC_FS is defined. Otherwise,
          the definitions in m68klinux-nat.c will be used. This is a
          bit of a hack. The supply_* routines do not belong in
          *_tdep.c files. But, there are several lynx ports that currently
          depend on these definitions.

        * configure.tgt: m68k-linux patch. Added m68*-*-linux*
          gdb_target.

        * configure.host: m68k-linux patch. Added m68*-*-linux*
          gdb_host.

        * Makefile.in: m68k-linux patch. Added compile line for
          m68klinux-nat.o
1998-12-08 20:41:19 +00:00
Zdenek Radouch
9357ae3468 fr30 update. 1998-12-03 15:37:08 +00:00
Andrew Cagney
c8623080cb CARP: --enable-build-warnings=-Werror: Fix problems stopping GDB being
canadian-crossed to host i386-cygwin.
1998-11-25 22:13:53 +00:00
Gavin Romig-Koch
f8c41900fc For top level:
* config.sub (mips64vr4xxx,mips64vr4xxxel): New.


For gcc:
	* config.sub (mips64vr4xxx,mips64vr4xxxel): New.
	* configure.in (mips64vr4xxx,mips64vr4xxxel): New.
	* config/mips/t-vr4xxx: New.
	* config/mips/elfb4xxx.h: New.
	* config/mips/elfl4xxx.h: New.
	* configure: Rebuilt.

For gas:
	* config/tc-mips.c (md_begin): Added mip64vr4xxx as a
	possible CPU_TARGET.

For gdb:
	* configure.tgt: Handle mips64*vr4xxx.

For ld:
	* configure.tgt: Handle mips64*vr4xxx.
1998-11-25 01:10:52 +00:00
Geoffrey Noer
d836385e11 Fri Nov 13 00:15:08 1998 Geoffrey Noer <noer@cygnus.com>
Changes to account for name change from cygwin32 to cygwin and
        clean up Win32-related ifdefs.

        * configure.tgt: check for cygwin* instead of cygwin32.
        New cygwin gdb_target variable loses the "32".
        * configure.host: check for cygwin* instead of cygwin32.
        New cygwin gdb_host variable loses the "32".
        * configure.in: test __CYGWIN__ instead of __CYGWIN32__,
        rename gdb_cv_os_cygwin32 variable to drop the "32".  Call
        AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
        autoconf yet.
        * configure: regenerate.

        * main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
          where
        cygwin path conv protos live, instead of adding a proto here
          for
        them here.
        * {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
        instead of __CYGWIN32__.
        * source.c: thoughout, check _WIN32 instead of WIN32.

        * config/i386/cygwin32.mh: delete.
        * config/i386/cygwin.mh: new file, was cygwin32.mh.
        * config/i386/cygwin32.mt: delete.
        * config/i386/cygwin.mt: new file, was cygwin32.mt.
        * config/i386/tm-cygwin32.h: delete.
        * config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
        * config/i386/xm-cygwin32.h: delete.
        * config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
        * config/i386/xm-windows.h: #include xm-cygwin.h now.
        * config/powerpc/cygwin32.mh: delete.
        * config/powerpc/cygwin.mh: new file, was cygwin32.mh.
        * config/powerpc/cygwin32.mt: delete.
        * config/powerpc/cygwin.mt: new file, was cygwin32.mt.
        * config/powerpc/tm-cygwin32.h: delete.
        * config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
        * config/powerpc/xm-cygwin32.h: delete.
        * config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.

        * rdi-share/aclocal.m4: regenerate with aclocal.
        * rdi-share/configure: regenerate with autoconf.
        * rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
        * serpardr.c,
        unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
1998-11-13 08:16:08 +00:00
Dave Brolley
7e6c86c2e3 Wed Nov 4 18:44:31 1998 Dave Brolley <brolley@cygnus.com>
* configure.tgt: Add fr30-*-elf*.
1998-11-05 21:20:58 +00:00
Ken Raeburn
3d759c53c9 sanitize-vr5400 -> sanitize-cygnus, for 98r2 1998-08-12 10:50:35 +00:00
Ian Lance Taylor
2c9fd4b158 remove d30v sanitization 1998-07-24 04:44:58 +00:00
Keith Seitz
895cc8ab1c * main.c (main): Fix violations of GNU coding standard.
* breakpoint.c: Export delete_command.

	* infcmd.c: Export continue_command, stepi_command, and nexti_command.

	* Makefile.in: Add target for v850ice.o.

	* configure.tgt: Add cygwin32 dependencies for v850 ice.
1998-07-15 18:52:50 +00:00
Stan Cox
7c0892b3c3 Added sparc86x support. 1998-04-18 22:45:37 +00:00
John Metzler
a47fe057fd Tue Apr 14 15:43:49 1998 John Metzler <jmetzler@cygnus.com>
* configure.tgt: Switch over to use tm-4320.h. Since I switched to
 	MIPS EABI the fixes are no longer backward compatible with 4300.
	* tm-vr4320.h: Added
	* vr4320.mt:   Added
1998-04-14 23:09:06 +00:00
Gavin Romig-Koch
e08480287d * configure.tgt (mips64*vr4320*el-*-elf*) : Removed spurious case. 1998-03-10 21:21:20 +00:00
Gavin Romig-Koch
e599ab169e Scrap the un-needed vr4111 stuff. 1998-03-06 21:22:59 +00:00
John Metzler
2425869cc2 Target triple mips64vr4111-*-elf is defined by the header file tm-vr4xxx.h 1998-03-04 00:28:41 +00:00
Gavin Romig-Koch
e4e30cdca4 * configure.tgt (mips64*vr4320*el-*-elf*,mips64*vr4320*-*-elf*) :
Added.
1998-03-03 16:16:57 +00:00
Jason Molenda
6cc922a988 Sun Mar 2 15:16:13 1998 Richard Henderson <rth@cygnus.com>
* configure.host, configure.tgt: Add sparc-linux.
        * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
        * config/sparc/*linux*: New files.
1998-03-02 23:17:31 +00:00
Doug Evans
5f3ba16b71 * configure.tgt (mips64r5900*-sky-elf*): Replaces txvu-elf.
* config/mips/txvu.mt (SIM): txvu -> mips.
1998-02-06 22:39:18 +00:00
Richard Henderson
ffa1f5b9c3 * alpha-nat.c (fetch_aout_core_registers): Rename from
fetch_core_registers.
(fetch_elf_core_registers): New function.
(supply_gregset): Use ALPHA_REGSET_BASE.
(supply_fpregset): Likewise.
(fill_fpregset): Likewise.
(alpha_aout_core_fns): Rename from alpha_core_fns.
(alpha_elf_core_fns): New.
* config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
Disable MMALLOC.
* config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
(TARGET_ELF64): Likewise.
(ALPHA_REGSET_BASE): New.
* config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
* config/alpha/tm-alphalinux.h: Include tm-sysv4.h.

* solib.c (elf_locate_base): Add TARGET_ELF64 support.
(info_sharedlibary_command): Likewise.

* configure.host: Match alpha*.
* configure.tgt: Likewise.
1998-02-03 01:20:27 +00:00
Stan Shebs
9a2e2aba8c * configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
ns32k-*-mach3*): Fix file names.
	(i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
	recognition, no source files for these.
	* configure.tgt (powerpc-*-aix4*): Remove config, now identical
	to powerpc-*-aix*.
	* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
	no longer needed.
1998-01-24 01:34:00 +00:00
Mark Alexander
549cf35bf6 Fix sanitization. 1998-01-23 00:19:49 +00:00
Ron Unrau
ea4d289e43 Recognize txvu-elf as a target. 1998-01-22 23:22:22 +00:00
Stan Shebs
4133151f13 * configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
recognition, no source files for these (note that the i386 Mach
	is pre-Mach 3).
	(mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
	* config/mips/mipsel64.mt: Remove, never referenced.
1998-01-21 03:01:47 +00:00
Gavin Romig-Koch
86418a70c8 toplevel--
* config.sub: Create the vr4111 as a copy of vr4100.
	gas--
	* config/tc-mips.c (md_begin): Create the vr4111 as a copy of
	the vr4100.
	gcc--
	* config.sub: Create the vr4111 as a copy of the vr4100.
	* configure.in: Same.
	* configure: Rebuild.
	gdb--
	* configure.tgt: Create the vr4111 as a copy of the vr4100.
1998-01-15 14:56:12 +00:00
Nick Clifton
3a9c3d120f Applied patches from Tony.Thompson@arm.com to implement the Angel remote
debugging interface and resurrected associated RDI files.
1998-01-08 11:12:39 +00:00
Mark Alexander
411a624cd1 * configure.tgt: Change little-endian tx39 target name to tx39l.
start-sanitize-tx19
	* configure.tgt: Change little-endian tx19 target name to tx19l.
end-sanitize-tx19
1997-12-16 20:10:36 +00:00
Andrew Cagney
e7ab2a476e (Mostly from Gavin Koch)
In dwarf2read.c, if the ABI is 32 bit and 64 bit addresses are encountered
discard the most significant 32 bits.
Use CORE_ADDR for address variables instead of long.
Add more explicit tx49 configur target.
Check/use sigaction/SA_RESTART in remote-sim.c
1997-12-15 12:38:05 +00:00
Nick Clifton
cd66558c07 Renamed v850eq -> v850ea 1997-12-12 19:05:07 +00:00
Nick Clifton
89b993af84 Add support for Thumb target. 1997-12-02 18:17:13 +00:00
Andrew Cagney
c08075aaf8 Have mips64vr5400-*-elf look like a mips64vr5000. 1997-11-24 06:31:05 +00:00
Gavin Romig-Koch
da3636f762 * configure.tgt: Add tx49 configury based on 4300. 1997-10-29 22:38:09 +00:00
Stan Shebs
501ad43a89 Remove sanitized-out Magic Cap support, will never be released 1997-10-06 19:38:43 +00:00
Jeff Law
91ee277977 * configure.tgt: Set gdb_target to r5900.
* config/mips/tm-r5900.h, config/mips/r5900.mt: New files

        * mips-tdep.c (_initialize_mips_tdep): Allow target files to
        override default FPU type.
Brought over from r5900 branch.
1997-09-26 18:53:22 +00:00
Felix Lee
afa38b3dff * configure.tgt (v850-*-*): necmsg.lib instead of v850.lib. 1997-09-26 17:37:34 +00:00
Stu Grossman
45a70ed653 * The following block of changes add support for debugging assembly
source files.
	* breakpoint.c (resolve_sal_pc):  Prevent crash when pc isn't
	associated with a function.
	* buildsym.c (record_line start_symtab end_symtab):  Don't delete
	symtabs which only have line numbers (but no other debug symbols).
	* dbxread.c (read_dbx_symtab end_psymtab):  Ditto.

	* remote-sim.c:  New functions gdbsim_insert/remove_breakpoint.  Use
	intrinsic simulator breakpoints if available, otherwise do it the
 	hard way.
	* configure.tgt:  Add d30v.
	* d30v-tdep.c:  New file.
	* config/d30v/d30v.mt, config/d30v/tm-d30v.h:  New files.
1997-09-25 01:26:36 +00:00
Jeff Law
7dce98aab2 vr5900 -> r5900
r5900 is always little endian.
1997-09-23 16:31:33 +00:00
Nick Clifton
446df8b8d5 Removed v850eq sanitization. 1997-09-21 01:19:51 +00:00
Stan Shebs
2bf15e13f5 Remove/retain old ARC stuff as appropriate 1997-09-16 02:27:10 +00:00
Mark Alexander
899c402166 * dbxread.c (MSYMBOL_SIZE): New macro.
(end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
	* elfread.c (elf_symtab_read): If ELF symbol is "special",
	such as a MIPS16 function, mark minimal symbol as special too.
	* mips-tdep.c (pc_is_mips16): New function to check whether
	a function is MIPS16 by looking at the minimal symbol.  Use
	pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
	* config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
	MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
	"special" MIPS16 bit in ELF and minimal symbols.
	* mdebugread.c (parse_partial_symbols): Don't construct a partial
	symbol table for a file that already has one.
start-sanitize-tx19
	* configure.tgt: Support TX19.
	* config/mips/tm-tx19.h, config/mips/tm-tx19l.h, config/mips/tx19.mt,
	config/mips/tx19l.mt: New files for TX19.
end-sanitize-tx19
1997-09-15 21:06:16 +00:00
Nick Clifton
3234b2e7a5 removed v850 sanitization. 1997-09-03 23:26:21 +00:00
Nick Clifton
ab11a82c2d Add support for v850e and v850eq targets. 1997-08-18 18:12:54 +00:00
Mark Alexander
28954a6eb3 start-sanitize-tic80
* config/tic80/tic80.mt:
	(GDBSERVER-DEPFILES, GDBSERVER_LIBS): Define for gdbserver.
	(SIM): Remove -lm to prevent make errors.
	* configure.tgt: add gdbserver to configdirs for tic80.
end-sanitize-tic80
	* gdbserver/utils.c (error): Change prototype to match defs.h.
	* gdbserver/low-sim.c: Change simulator calls to use new interface.
	* remote.c (remote_write_bytes): Include '$' at start of packet
	and checksum at end of packet in overhead calculation.
1997-08-09 04:49:48 +00:00
Michael Snyder
00e40d11f4 Fri Jun 13 13:44:47 1997 Michael Snyder (msnyder@cleaver.cygnus.com)
* config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39.
	[also clean up sanitization]
1997-06-13 20:53:34 +00:00
Michael Snyder
3d400c0939 * configure.tgt: add mipsr3900-elf target
* config/mips/r3900*.mt config/mips/tm-r3900*.h: ditto
1997-06-03 23:28:54 +00:00
David Edelsohn
038e48cf64 Remove m32r sanitization. 1997-04-07 23:01:27 +00:00
Fred Fish
12967062e4 * remote-sim.c (simulator_command): Add comment about dealing with
NULL or empty args.
start-sanitize-tic80
	* Makefile.in (tic80-tdep.o): Add target.
	* configure.tgt: Add tic80 case.
	* tic80-tdep.c: New file.
	* config/tic80/{tic80.mt, tm-tic80.h}: New files.
end-sanitize-tic80
1997-03-22 23:52:04 +00:00
Michael Meissner
23e92f3fbd Make powerpc simulator support in gdb dependent on whether the simulator was configured in 1997-03-21 20:56:10 +00:00
Geoffrey Noer
9e3977b9df Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
New UnixWare 2.1 configuration
        * config/i386/i386v42mp.mt: new
        * config/i386/i386v42mp.mh: new
        * config/i386/tm-i386v42mp.h: new
        * config/i386/nm-i386v42mp.h: new
        * configure.tgt: added new entries
        * configure.host: added new entries
1997-03-20 00:41:50 +00:00
Stan Shebs
84fdbc864f * configure.tgt (mips*-*-lnews*): New target. 1997-02-26 04:23:45 +00:00
Michael Meissner
c6c7035cfb Since d10v is public now, remove all sanitization statements 1997-02-20 16:05:18 +00:00
Gavin Romig-Koch
276c2d7dc8 Add r5900 1997-02-11 13:26:34 +00:00
Geoffrey Noer
d9ecb24ce8 Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
Start mn10200 gdb port by adding copies of mn10300
        target-specific files with all instances of mn10300 changed
        to mn10200 to start with.
        * mn10200-tdep.c: new
        * config/mn10200/tm-mn10200.h: new, REGISTER_SIZE is 24 bits not 32,
        SP_REGNUM and FP_REGNUM are different, also no lar or lir.
        * config/mn10200/mn10200.mt: new
        * configure.tgt: add mn10200 entry
1997-01-22 10:38:01 +00:00
Stu Grossman
6c310da826 * Makefile.in configure configure.in: Remove ENABLE_CLIBS,
ENABLE_OBS, and THREAD_DB_OBS.  These are consolidated into LIBS
	and CONFIG_OBS.
	* configure configure.in:  Clean up test cases around thread support.
start-sanitize-v850
	* configure.tgt (v850-*-*):  Include v850ice.o and v850.lib if
	host is Windows.
end-sanitize-v850
	* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
	printcmd.c valops.c value.h values.c:  Add bfd_section arg to
	value_at and value_at_lazy.
	* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
	Add bfd_section arg to prim_record_minimal_symbol_and_info.
	* corefile.c gdbcore.h printcmd.c valops.c:  Use read_memory_section
	instead of read_memory.  It takes a bfd_section arg.
	* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h:  Remove
	unnecessary cast for assignment of struct dbx_symfile_info.
	Struct objfile now uses a real pointer instead of PTR for this
	element.
	* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
	text, data and bss into dbx_symfile_info.
	* exec.c (xfer_memory):  Handle transfers for user-specified
	sections.
	* findvar.c (read_var_value locate_var_value):  Copy bfd section
	from the symbol to the value.
	* gdb-stabs.h:  Add section pointers for text, data and bss
	sections.
	* maint.c (translate address command):  Add test code for overlay
	address translation.
	* printcmd.c (do_examine do_one_display):  Now takes a bfd section
	arg.
	* (print_formatted x_command):  Record current section along with
	current address for repeated commands.
	* sparc-nat.c (fetch_inferior_registers):  Change
	target_xfer_memory to target_{read write}_memory to allow changes
	to target_xfer_memory interface for section info.
	* symmisc.c (dump_msymbols print_symbol):  Print section
	assocaited with symbol.
	* symtab.c (fixup_symbol_section):  New routine to
	add section info to symbols returned by lookup_symbol.
	* symtab.h (struct general_symbol_info):  Add bfd section to
	symbols.
	* target.c target.h (target_xfer_memory):  Add bfd section to
	args.
	* (target_read_memory_section):  New routine to read data from a
	specific section.
	* (target_memory_bfd_section):  New global variable to pass bfd
	section in to targets.
	* valarith.c (value_add value_addr value_array):  Preserve bfd
	section when computing new value.
	* value.h (struct value):  Add bfd section to values.
	* values.c (allocate_value value_copy):  Initialize/preserve bfd
	section.
	* (unpack_double):  Clean up _MSC_VER conditionals to remove
	duplicate code.
start-sanitize-v850
	* v850ice.c:  New module to support communication with NEC's
	PC-based ICE.
	* config/v850/tm-v850.h (REGISTER_NAMES):  Replace sp, gp, fp, and
	ep names with rxx names.  sp and fp are renamed via a different
	mechanism.
end-sanitize-v850
1997-01-04 00:25:53 +00:00
Geoffrey Noer
c5c4495202 Sun Dec 1 00:40:46 1996 Geoffrey Noer <noer@cygnus.com>
* configure.tgt: add new mn10300 entry
1996-12-01 08:46:59 +00:00
Peter Schauer
0db3fe94c3 Add support for Irix 6.2 native O32 and N32 ABI.
* config.in, configure.in, configure:  Check for <objlist.h>.
	* configure.tgt:  Handle mips*-sgi-irix6* like irix5 for now.

	* cp-valprint.c (cp_print_value_fields):  Use SYMBOL_VALUE_ADDRESS
	instead of SYMBOL_BLOCK_VALUE to get the address of a static member.

	* dwarf2read.c:  Turn warnings and recoverable errors into complaints,
	add new complaints where appropriate.
	gcc -Wall cleanup.
	(struct line_head):  Change line_base from char to int to avoid
	problems with compilers whose plain char is represented by an
	unsigned char.
	(struct partial_die_info):  Add is_declaration field.
	(dwarf2_tmp_obstack):  New obstack for allocating temporary storage
	used during symbol reading.
	(cu_header_offset):  New variable for resolving relative reference
	dies.
	(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
	New interface variables for decode_locdesc.
	(struct dwarf2_pinfo):  New structure for communication between
	psymtab and symtab reading, passed via pst->read_symtab_private.
	(dwarf2_has_info, dwarf2_build_psymtabs):  Accept objects files
	without line number sections.
	(dwarf2_build_psymtabs_hard):  Initialize temporary obstack
	for symbol reading.
	Allocate and initialize pst->read_symtab_private.
	Relocate pst->textlow and pst->texthigh with baseaddr.
	(scan_partial_symbols):  Do not add DW_AT_declaration symbols
	to the partial symbol table.
	Add file scope enumerator symbols to the partial symbol table.
	Fix typo in highpc computation.
	If we didn't find a lowpc, set it to highpc to avoid complaints
	from `maint check.
	(add_partial_symbol):  Relocate symbol values with baseaddr.
	Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
	minimal symbol table.
        Obtain symbol values for DW_TAG_variable symbols from the location
	descriptor, skip symbols with missing location desciptors.
	Skip symbols for aggregate types without children.
	Handle enumerator symbols.
	(dwarf2_psymtab_to_symtab):  Issue symbol reading message if verbose.
	(psymtab_to_symtab_1):  Set local variables from
	pst->read_symtab_private, set cu_header_offset and baseaddr.
	Initialize temporary obstack for symbol reading, initialize
	buildsym and add a cleanup to really_free_pendings.
	Relocate highpc with baseaddr when calling end_symtab.
	If the compilation is from a C file generated by language
	preprocessors, do not set the symtab language if it was already
	deduced by start_subfile.
	Removed verbose sorting symbol table message.
	(process_die):  Handle DW_TAG_ptr_to_member_type and
	DW_TAG_reference_type.
	Use read_subroutine_type to get the function type for
	DW_TAG_subprogram before calling read_func_scope.
	(read_file_scope):  Initialize file name to <unknown>, start_subfile
	expects a non-NULL name.
	If we didn't find a lowpc, set it to highpc to avoid complaints
	from finish_symbol.
	Relocate lowpc and highpc with baseaddr.
	Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
	Zero out ftypes for each new compilation unit (may be different
	language or different objfile).
	Accept compilation units without line number information, pass
	comp_dir to decode_lines.
	(read_func_scope):  Initialize function name to <unknown> to avoid
	core dumps when DW_AT_name is missing.
	Relocate lowpc and highpc with baseaddr.
	Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
	Pass function type to new_symbol.
	(read_lexical_block_scope):  Relocate lowpc and highpc with baseaddr.
	(read_structure_scope):  Set TYPE_TAG_NAME, not TYPE_NAME.
	Handle DW_TAG_class_type.
	Copy fields to type_obstack, release temporary storage for fields.
	Don't add symbol if die is a stub die and has no children.
	Handle C++ static member fields.
	(read_enumeration):  Set TYPE_TAG_NAME, not TYPE_NAME.
	Copy fields to type_obstack, release temporary storage for fields.
	Let new_symbol handle the symbol creation for enumerators
	instead of handcrafting a symbol.
	Determine signedness of enum type from enumerators.
	(dwarf_read_array_type):  Handle variable length arrays.
	Use lookup_pointer_type instead of handcrafting a type.
	Create array type only if a DW_TAG_subrange_type was found.
	(read_tag_pointer_type, read_tag_reference_type):
	Use lookup_pointer_type and lookup_reference_type instead
	of handcrafting a type.
	(read_tag_ptr_to_member_type):  New function to handle
	DW_TAG_ptr_to_member_type.
	(read_subroutine_type):  Handle parameter dies.
	Use lookup_function_type instead of handcrafting a type.
	(read_typedef):  Allocate a TYPE_CODE_TYPEDEF type for the typedef.
	(read_base_type):  If the type has a name, use init_type to create
	a new type instead of second guessing a fundamental type.
	(read_comp_unit):  Reset die reference table before building
	a new one.
	(dwarf2_read_section):  Read section contents into psymbol_obstack.
	(dwarf2_read_abbrevs):  Handle unterminated abbreviations
	for a compile unit gracefully.
	(read_partial_die):  Zero partial die before reading its info.
	Handle DW_AT_declaration.
	Fix typo in handling of DW_FORM_block4.
	(read_full_die):  Fix typo in handling of DW_FORM_block4.
	(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
	New routines to get signed values from a buffer.
	(read_n_bytes, read_string):  Allocate storage from the temporary
	obstack. If the host char size permits it, return pointer
	to buffer instead of allocating storage.
	(set_cu_language):  Handle DW_LANG_Mips_Assembler.
	(dwarf_attr):  Return NULL if reference die for DW_AT_specification
	or DW_AT_abstract_origin die is not found.
	(record_minimal_symbol):  Removed, replaced with a direct call to
	prim_record_minimal_symbol, it now handles saving the string itself.
	(convert_locdesc):  Removed, partial symtab reading now uses
	decode_locdesc.
	(dwarf_attr):  Use dwarf2_get_ref_die_offset to get the absolute
	offset for the die reference.
	(dwarf_decode_lines):  Complain if the line section info is missing.
	Use read_1_signed_byte to extract lh.line_base to avoid
        problems with compilers whose plain char is represented by an
        unsigned char.
	Add cleanups for allocated temporary storage.
	Start a subfile for the first file in the state machine.
	Fix off by one problem with dirs.dirs access.
	Use comp_dir when directory index is 0.
	Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
	(dwarf2_start_subfile):  Try to keep line numbers from identical
	absolute and relative file names in a common subfile.
	(new_symbol):  Allocate symbol and symbol name on the symbol_obstack.
	Set SYMBOL_LINE from DW_AT_decl_line if present.
	Set SYMBOL_TYPE from passed type if not NULL.
	Change DW_TAG_variable symbol types with missing type entries
	to a sensible type.
	Handle optimized_out, offreg and islocal storage classes.
	Add external symbols with type information whose address isn't
	known as LOC_UNRESOLVED symbols.
	Synthesize typedefs for C++ classes, structs, unions and enumerations.
	Handle DW_TAG_enumerator symbols, complain for unrecognized
	symbol tags.
	(die_type):  A missing DW_AT_type represents a void type.
	Use dwarf2_get_ref_die_offset to get the absolute offset for
	the die reference.
	(die_containing_type):  New function to build type from
	DW_AT_containing_type attribut.
	(read_type_die):  Handle DW_TAG_ptr_to_member_type.
	Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
	(dwarf_base_type):  Fix typo with creation of FT_UNSIGNED_SHORT
	fundamental type.
	(create_name):  Removed, symbol name allocation is now done
	in new_symbol.
	(dump_die):  Use print_address_numeric to print a CORE_ADDR.
	(dwarf2_empty_die_ref_table):  New function to clear the die
	reference table.
	(dwarf2_get_ref_die_offset):  New function to get the absolute
	die offset from a die reference attribute.
	(decode_locdesc):  Complete rewrite using a stack, code mostly
	borrowed from dwarfread.c:locval.
	(dwarf_alloc_type):  Removed, replaced by direct calls to alloc_type.
	(dwarf_alloc_block):  Allocate block on temporary obstack.

	* elfread.c (elf_symtab_read):  When handling Irix dynamic symbols,
	skip section name symbols and relocate all others.
	(elf_symfile_read):  Build dwarf2 psymtab even if offset is non-zero.

	* irix5-nat.c (fetch_core_registers):  Handle core_reg_sect
	from N32 executables. Call registers_fetched after extracting
	the registers.
	(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR):  New
	definitions to enable support of O32 and N32 format objlists.
	(struct so_list):  New members offset, so_name and lmstart to
	eliminate dependencies from the objlist format used.
	(solib_map_sections, symbol_add_stub, solib_add,
	info_sharedlibrary_command, solib_address, clear_solib):  Use
	so_name and LM_OFFSET.
	(first_link_map_member):  Rewrite to enable support of O32 and N32
	format objlists.
	(next_link_map_member, xfer_link_map_member):  New functions to
	support O32 and N32 format objlists.
	(find_solib):  Use first_link_map_member, next_link_map_member and
	xfer_link_map_member.
	(solib_create_inferior_hook):  Use TARGET_SIGNAL_* instead of
	host signal numbers.

	* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
	Pass CORE_ADDR variant to add_psymbol_to_list.

	* mips-tdep.c (heuristic_proc_desc):  Stop examining the prologue
	if we encounter a positive stack adjustment. Handle `move $30,$sp'.
	Handle `sd reg,offset($sp)' for 32 bit ABIs.

	* symmisc.c (dump_msymbols, print_partial_symbols):  Use
	print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
	(dump_symtab):  Print compilation directory if it is not NULL.

	* valops.c (search_struct_field, value_struct_elt_for_reference):
	Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
	address of a static member.
1996-12-01 08:33:39 +00:00
Michael Snyder
8665f3dcfa Thu Oct 31 16:37:17 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
        * configure.tgt: Add entry for m32r target.
        * monitor.h:   Add a flag to tell monitor_store_register to use
                        (val, regno) instead of (regno, val).
        * monitor.c:   Make monitor_store_register honor the above flag.
                        Make monitor_exp ignore DC1/DC3 for m32r.
                        Increase buf size in monitor_dump_regs.
1996-11-01 00:41:21 +00:00
Mark Alexander
26c87277f4 * config/mips/{tm-vr5000.h,tm-vr5000el.h,vr5000.mt,vr5000el.mt}:
New files.
	* configure.tgt: Modify cases for vr5000 to use new files.
1996-10-28 04:24:30 +00:00
Mark Alexander
8ddf07a29a * dbxread.c (process_one_symbol): Interpret end-of-function
markers correctly; this fixes problem on Vr5000 where all
	functions in a module had the same address.
	* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
	Correct	for pc-linux-gnu problem in config.guess.
	* configure: Regenerate.
1996-10-24 18:51:46 +00:00
Stan Shebs
943e243ce7 * configure.host: New file, host configuration mapping.
* configure.tgt: New file, target configuration mapping.
	* configure.in: Remove host and target mapping.
	* configure: Rebuild.
1996-10-18 01:27:59 +00:00