Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Fix regexp.
* gdb.tui/regs.exp: Fix regexps.
* gdb.tui/main.exp: Fix regexp.
Change-Id: Ib6661361171ac120bb92f4a8aec7efa4bcaa36b9
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_set_win_height_command): Call
tui_adjust_window_height.
(tui_adjust_win_heights, new_height_ok): Remove.
* tui/tui-layout.h (tui_adjust_window_height): Declare.
* tui/tui-layout.c (tui_adjust_window_height): New function.
Change-Id: I6bb681375a46adc8d29fd06f581deed4e078e78a
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-win.c (tui_resize_all): Remove code, call
tui_apply_current_layout.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/resize.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
Change-Id: I3dc6c02a753d495d9ab5e8213d550a147198ce6f
This patch introduces the first use of tui_layout, by changing
show_layout to clone and use the appropriate tui_layout.
This resulted in one minor layout change, and also in the unintended
-- but good -- side effect that the title of each boxed window is now
visible.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (tui_apply_current_layout): Declare.
* tui/tui-layout.c (standard_layouts, applied_layout): New
globals.
(tui_apply_current_layout): New function.
(show_layout): Set applied_layout. Call
tui_apply_current_layout.
(show_source_command, show_disasm_command)
(show_source_disasm_command, show_data)
(show_source_or_disasm_and_command): Remove.
(initialize_layouts): New function.
(_initialize_tui_layout): Call initialize_layouts.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* gdb.tui/regs.exp: Update.
* gdb.tui/empty.exp (layouts): Update.
* gdb.tui/basic.exp: Update.
* lib/tuiterm.exp (_check_box): Don't check bottom border.
Change-Id: If1ee06ee58f4803e8c213f4ab0f5bb59f4650ec2
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Change-Id: I3a4cae666327b617d862aaa356f8179f945c6a4e
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-wingeneral.c (tui_gen_win_info::make_window): Update.
* tui/tui-win.c (tui_adjust_win_heights, tui_resize_all): Update.
* tui/tui-layout.c (tui_gen_win_info::resize): Update.
* tui/tui-data.h (struct tui_point): Remove.
(struct tui_gen_win_info) <origin>: Remove.
<x, y>: New fields.
* tui/tui-command.c (tui_cmd_window::resize): Update.
Change-Id: I3f77920585b9ea9e2b4b189f3f3ae32d4da0c252
This introduces a new method, tui_gen_win_info::min_height, to fetch
the minimum height of a window. This is used in the subsequent
unified layout patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <min_height>:
Implement.
* tui/tui-regs.h (struct tui_data_item_window) <min_height>:
Implement.
* tui/tui-data.h (struct tui_gen_win_info) <min_height>: New
method.
(struct tui_win_info) <min_height>: Implement.
Change-Id: Id33baffdf041fde072e15c1ff89b75f8b8118adb
This moves the can_box method to tui_gen_win_info, so that it will be
available on the tui_locator_window class. This will be used in a
subsequent patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-data.h (struct tui_gen_win_info) <can_box>: New method.
(struct tui_win_info) <can_box>: Update.
Change-Id: Idfa58af41341607932d3c39415f6a35ee9b5d3dc
This moves the max_height method to tui_gen_win_info and implements it
in the subclasses. This is used by a subsequent patch, which will
normalize window layout across all window types.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <max_height>: New
method.
* tui/tui-regs.h (struct tui_data_item_window) <max_height>: New
method.
* tui/tui-data.h (struct tui_gen_win_info) <max_height>: New
method.
(struct tui_win_info) <max_height>: Now override.
Change-Id: I4ba3e8899bc4668328d3d78e3c1674c61882450d
Now that the GDB 9 branch has been created, we can
bump the version number.
gdb/ChangeLog:
GDB 9 branch created (27f7b2f640):
* version.in: Bump version to 10.0.50.DATE-git.
PR build/25268 points out that the build fails on macOS, because on
macOS the "pthread_setname_np" function takes a single argument.
This patch fixes the problem, by introducing a new adapter function
that handles both styles of pthread_setname_np.
This change also meant moving the pthread_setname_np call to the
thread function, because macOS only permits setting the name of the
current thread. This means that there can be a brief window when gdb
will see the wrong name; but I think this is a minor concern.
Tested by rebuilding on x86-64 Fedora 30, and on macOS High Sierra.
On Linux I also debugged gdb to ensure that the thread names are still
set correctly.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
PR build/25268:
* gdbsupport/thread-pool.c (set_thread_name): New function.
(thread_pool::set_thread_count): Don't call pthread_setname_np.
(thread_pool::thread_function): Call set_thread_name.
Change-Id: Id7bf28d99ca27a893a9fc87ebb90b15a9c2a9cb4
A recent commit changed bfd_get_signed_8 to extend the result to a
bfd_signed_vma. This caused a compiler error in one spot in my
--enable-targets=all gdb build, where the result of bfd_get_signed_8
was passed to printf.
This patch fixes the build. Tested by rebuilding.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* fbsd-tdep.c (fbsd_core_info_proc_status): Cast result of
bfd_get_signed_8.
Change-Id: Ic015f5fd3d88da6b5da8f7b4e1d11d5c981333db
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
This is
*cst = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) + data[3];
data is unsigned char which promotes to int.
* h8300-dis.c (extract_immediate): Avoid signed overflow.
(bfd_h8_disassemble): Likewise.
In the following buf is an unsigned char array, so elements are
promoted to int before arithmetic operations.
if (dis_info.info->endian == BFD_ENDIAN_BIG)
while (n--)
val |= buf[n] << (n*8);
else
for (i = 0; i < n; i++)
val |= buf[i] << (i*8);
* csky-dis.c (csky_chars_to_number): Rewrite. Avoid signed
overflow when collecting bytes of a number.
This was the following in print_with_operands
case 4:
number
= buffer[2] + buffer[3] * 256 + buffer[4] * 65536
+ buffer[5] * 0x1000000;
and buffer[5] * 0x1000000 can indeed overflow. So to fix this we need
to use unsigned arithmetic where overflow semantics are specified.
But number is a long, and the expression is int which will be sign
extended to long. If we make the expression unsigned it will be zero
extended. So make number an int32_t and rearrange a little for some
of the places that need fixing.
* cris-dis.c (print_with_operands): Avoid signed integer
overflow when collecting bytes of a 32-bit integer.
This was:
unsigned long mask = SBM (instruction->match_bits);
with
#define SBM(offs) ((((1 << (32 - offs)) -1) << (offs)))
Well, there are a couple of problems. Firstly, the expression uses
int values (1 rather than 1u or 1ul) resulting in the ubsan error, and
secondly, a zero offs will result in a 32-bit shift which is undefined
if ints are only 32 bits.
* cr16-dis.c (EXTRACT, SBM): Rewrite.
(cr16_match_opcode): Delete duplicate bcond test.
This was the following in fmtconst_val, x is unsigned int.
x = SIGNEXTEND (x, constant_formats[cf].nbits);
Problem is, the SIGNEXTEND macro assumed its arg was a long and sign
extended by shifting left then shifting right, and didn't cast the
arg. So don't do the silly shift thing. It's not guaranteed to work
anyway according to the C standard. ">>" might do a logical shift
even if its args are signed.
* bfin-dis.c (HOST_LONG_WORD_SIZE, XFIELD): Delete.
(SIGNBIT): New.
(MASKBITS, SIGNEXTEND): Rewrite.
(fmtconst): Don't use ? expression now that SIGNEXTEND uses
unsigned arithmetic, instead assign result of SIGNEXTEND back
to x.
(fmtconst_val): Use 1u in shift expression.
When operand->bits is 32, the following results in UB.
value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
* arc-dis.c (find_format_from_table): Use ull constant when
shifting by up to 32.
Assembling this to an object and trying to disassemble results in
objdump -d looping forever.
.inst 0x45205120
PR 25270
* aarch64-dis.c (aarch64_decode_variant_using_iclass): Return
false when field is zero for sve_size_tsz_bhs.
In Operand_soffsetx4_decode:
soffsetx4_0 = 0x4 + ((((int) offset_0 << 14) >> 14) << 2);
and other places.
Don't sign extend with shifts! This file also has many occurrences of
truncation via shifts, which aren't a problem due to using uint32, but
I dislike on principle enough to fix.
* xtensa-modules.c (Field_* functions): Don't mask using shifts.
(Operand_soffsetx4_decode, Operand_simm4_decode),
(Operand_simm8_decode, Operand_simm8x256_decode),
(Operand_simm12b_decode, Operand_label8_decode),
(Operand_label12_decode, Operand_soffset_decode),
(Operand_xt_wbr15_label_decode, Operand_xt_wbr18_label_decode): Don't
sign extend using shifts.
(Operand_immrx4_decode, Operand_uimm16x4_decode): Avoid UB in
constant.
Two places in epiphany_cgen_extract_operand, "value" is a long.
value = ((((value) << (1))) + (pc));
cpu/
* epiphany.cpu (f-simm8, f-simm24): Use multiply rather than
shift left to avoid UB on left shift of negative values.
opcodes/
* epiphany-ibld.c: Regenerate.
Here, since val is signed:
*valuep = (val << scale);
* cpu-ia64-opc.c (ext_imms_scaled): Avoid undefined left shift
of negative values by using unsigned vars.
I noticed that an example in the gdb.prompt documentation used the
wrong kind of quotes -- because it is code, it should use a plain
ASCII quotation mark. I also slightly shortened the sample text here,
so it would more clearly fit on a single line.
gdb/doc/ChangeLog
2019-12-10 Tom Tromey <tom@tromey.com>
* python.texi (gdb.prompt): Use correct quotes in example.
Shorten sample text.
Change-Id: I4153928c0d88001244ad410f3943c952a6ebfeb1
Add tests which check for accessibility of variables from within
various OpenMP parallel regions.
Tested on Fedora 27, 28, 29, 30, and 31. I also tested with my OpenMP
work on Fedora 30. The test has been annotated with setup_xfail and
setup_kfail statements so that there are no unexpected failures on any
of these platforms when using gcc. Better still, for my own testing
anyway, is that there are also no XPASSes or KPASSes either. So,
regardless of platform, when using gcc, and regardless of whether my
(not yet public) OpenMP work is used, seeing a FAIL indicates a real
problem.
Fedora 27 results:
# of expected passes 85
# of expected failures 65
(Note: I have not retested F27 since v1 of the patch; it's possible
that the numbers will be slightly different for v2.)
Fedora 28, 29, 30 results:
# of expected passes 131
# of expected failures 4
# of known failures 16
Fedora 30, 31 results w/ my OpenMP work:
# of expected passes 151
The above results all use gcc, either the system gcc or a development
gcc (when testing against my OpenMP work in GDB). I've also tested
with clang 9.0.0 and icc 19.0.5.281 20190815 on Fedora 31.
Fedora 31, clang:
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i02
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: after parallel: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print j
Fedora 31, icc:
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 1st thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 1st call: 2nd thread: print z
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 1st thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print j
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_func: 2nd call: 2nd thread: print z
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
For both clang and icc, it turns out that there are some problems with
the DWARF that these compilers generate. Of the two, icc does at
least nest the subprogram of the outlined function representing the
parallel region within the function that it's defined, but does not
handle inner scopes if they exist. clang places the subprogram for
the outlined function at the same level as the containing function, so
variables declared within the function aren't visible at all.
I could call setup_xfail to avoid FAILs for clang and icc also, but I don't
want to further complicate the test.
gdb/testsuite/ChangeLog:
* gdb.threads/omp-par-scope.c: New file.
* gdb/threads/omp-par-scope.exp: New file.
Change-Id: Icb9c991730d84ca7509380af817dfcc778e764ea
This commit adds the gdb_caching_proc, support_nested_function_tests,
to lib/gdb.exp. It tests to see whether or not the C compiler has
support for nested function calls.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (support_nested_function_tests): New proc.
Change-Id: Ic2c93bc4cc200e07e104a2398f89a9c0514bdc75
We only ever use one of the two overloads, so to avoid breaking -Werror
builds, supress the warning.
gdb/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* gdbsupport/safe-strerror.c: Supress the unused function warning
for select_strerror_r.
Change-Id: I344869a382bb36fe181b5b2a31838d1d20f58169
