Fix od-macho.c to use a leb128 function from binutils/dwarf.c rather
than one from bfd/libbfd.c.
binutils/
* elfcomm.h (HOST_WIDEST_INT): Move to..
* sysdep.h: ..here.
* od-macho.c: Don't include libbfd.h. Do include dwarf.h
(dump_dyld_info_rebase): Use read_leb128 rather than
read_unsigned_leb128.
(dump_dyld_info_bind, dump_dyld_info_export_1): Likewise.
(dump_segment_split_info): Likewise.
(dump_dyld_info): Rename vars to avoid shadowing dwarf.h enums.
(dump_load_command): Likewise.
This patch fixes problems with a few GDB testsuites when executing in a
path that contains special characters (e.g. "++"). When such paths are
used as a regular expression, the regular expression parser will choke
and cause the tests to fail. This patch uses string_to_regexp to
escape strings that will be used as regular expressions, in order to
sanitize path names used in expect scripts.
2016-07-15 Zachary Welch <zwelch@codesourcery.com>
Don Breazeal <donb@codesourcery.com>
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Escape paths used in regular expressions.
* gdb.stabs/weird.exp: Likewise.
FreeBSD's librt uses SIGLIBRT as an internal signal to implement
SIGEV_THREAD sigevent notifications. Similar to SIGLWP or SIGCANCEL
this signal should be passed through to child processes by default.
include/ChangeLog:
* signals.def: Add GDB_SIGNAL_LIBRT.
gdb/ChangeLog:
* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.
bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information. Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting. Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.
ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.
Fixes failures on alpha, ia64, mcore, metag, moxie, and pj due to lack
of 16-bit relocs.
* testsuite/binutils-all/remove-relocs-01.s: Use .dc.a, not .word.
Don't convert PC-relative REL relocations against absolute symbols to
section-relative references and retain the original symbol reference
instead. Offsets into the absolute section may overflow the limited
range of their in-place addend field, causing an assembly error, e.g.:
$ cat test.s
.text
.globl foo
.ent foo
foo:
b bar
.end foo
.set bar, 0x12345678
$ as -EB -32 -o test.o test.s
test.s: Assembler messages:
test.s:3: Error: relocation overflow
$
With the original reference retained the source can now be assembled and
linked successfully:
$ as -EB -32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000ffff b 0 <foo>
0: R_MIPS_PC16 bar
4: 00000000 nop
...
$ ld -melf32btsmip -Ttext 0x12340000 -e foo -o test test.o
$ objdump -dr test
test: file format elf32-tradbigmips
Disassembly of section .text:
12340000 <foo>:
12340000: 1000159d b 12345678 <bar>
12340004: 00000000 nop
...
$
For simplicity always retain the original symbol reference, even if it
would indeed fit.
Making TC_FORCE_RELOCATION_ABS separate from TC_FORCE_RELOCATION causes
R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC16_S1 branch
relocations against absolute symbols to be converted on RELA targets to
section-relative references. This is an intended effect of this change.
Absolute symbols carry no ISA annotation in their `st_other' field and
their value is not going to change with linker relaxation, so it is safe
to discard the original reference and keep the calculated final symbol
value only in the relocation's addend.
Similarly R6 R_MIPS_PCHI16 and R_MIPS_PCLO16 relocations referring
absolute symbols can be safely converted even on REL targets, as there
the in-place addend of these relocations covers the entire 32-bit
address space so it can hold the calculated final symbol value, and
likewise the value referred won't be affected by any linker relaxation.
Add a set of suitable test cases and enable REL linker tests which now
work and were previously used as dump patterns for RELA tests only.
gas/
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
(mips_force_relocation_abs): New prototype.
* config/tc-mips.c (mips_force_relocation_abs): New function.
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/branch-absolute-addend.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
test.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run
`branch-absolute-addend', `mips16-branch-absolute',
`mips16-branch-absolute-addend' and
`micromips-branch-absolute-addend'.
Correct a problem with the ISA bit being stripped from the addend of
compressed branch relocations, affecting RELA targets. It has been
there since microMIPS support has been added, with:
commit df58fc944d
Author: Richard Sandiford <rdsandiford@googlemail.com>
Date: Sun Jul 24 14:20:15 2011 +0000
<https://sourceware.org/ml/binutils/2011-07/msg00198.html>, ("MIPS:
microMIPS ASE support") and R_MICROMIPS_PC7_S1, R_MICROMIPS_PC10_S1 and
R_MICROMIPS_PC16_S1 relocations originally affected, and the
R_MIPS16_PC16_S1 relocation recently added with commit c9775dde32
("MIPS16: Add R_MIPS16_PC16_S1 branch relocation support") actually
triggering a linker error, due to its heightened processing strictness
level:
$ cat test.s
.text
.set mips16
foo:
b bar
.set bar, 0x1235
.align 4, 0
$ as -EB -n32 -o test.o test.s
$ objdump -dr test.o
test.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1230
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o test test.o
test.o: In function `foo':
(.text+0x0): Branch to a non-instruction-aligned address
$
This is because the ISA bit of the branch target does not match the ISA
bit of the referring branch, hardwired to 1 of course.
Retain the ISA bit then, so that the linker knows this is really MIPS16
code referred:
$ objdump -dr fixed.o
fixed.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: f000 1000 b 4 <foo+0x4>
0: R_MIPS16_PC16_S1 *ABS*+0x1231
...
$ ld -melf32btsmipn32 -Ttext 0 -e 0 -o fixed fixed.o
$
Add a set of MIPS16 tests to cover the relevant cases, excluding linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
gas/
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1>
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the
addend calculated.
* testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit
in `bar', export `foo'.
* testsuite/gas/mips/mips16-branch-absolute.d: Adjust
accordingly.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d:
Likewise.
ld/
* testsuite/ld-mips-elf/mips16-branch-absolute.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/ld-mips-elf/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `mips16-branch-absolute' and
`mips16-branch-absolute-addend', referred indirectly only.
Fix a generic BFD issue with relocations against absolute symbols, which
are installed without using any individual relocation handler provided
by the backend. This causes any absolute section's addend to be lost on
REL targets such as o32 MIPS, and also relocation-specific calculation
adjustments are not made.
As an example assembling this program:
$ cat test.s
.text
foo:
b bar
b baz
.set bar, 0x1234
$ as -EB -32 -o test-o32.o test.s
$ as -EB -n32 -o test-n32.o test.s
produces this binary code:
$ objdump -dr test-o32.o test-n32.o
test-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
test-n32.o: file format elf32-ntradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 10000000 b 4 <foo+0x4>
0: R_MIPS_PC16 *ABS*+0x1230
4: 00000000 nop
8: 10000000 b c <foo+0xc>
8: R_MIPS_PC16 baz-0x4
c: 00000000 nop
$
where it is clearly visible in `test-o32.o', which uses REL relocations,
that the absolute section's addend equivalent to the value of `bar' -- a
reference to which cannot be fully resolved at the assembly time,
because the reference is PC-relative -- has been lost, as has been the
relocation-specific adjustment of -4, required to take into account the
PC+4-relative calculation made by hardware with branches and seen in the
external symbol reference to `baz' as the `ffff' addend encoded in the
instruction word. In `test-n32.o', which uses RELA relocations, the
absolute section's addend has been correctly retained.
Give precedence then in `bfd_perform_relocation' and
`bfd_install_relocation' to any individual relocation handler the
backend selected may have provided, while still resorting to the generic
calculation otherwise. This retains the semantics which we've had since
forever or before the beginning of our repository history, and is at the
very least compatible with `bfd_elf_generic_reloc' being used as the
handler.
Retain the `bfd_is_und_section' check unchanged at the beginning of
`bfd_perform_relocation' since this does not affect the semantics of the
function. The check returns the same `bfd_reloc_undefined' code the
check for a null `howto' does, so swapping the two does not matter.
Also the check is is mutually exclusive with the `bfd_is_abs_section'
check, since a section cannot be absolute and undefined both at once, so
swapping the two does not matter either.
With this change applied the program quoted above now has the in-place
addend correctly calculated and installed in the field being relocated:
$ objdump -dr fixed-o32.o
fixed-o32.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo>:
0: 1000048c b 1234 <bar>
0: R_MIPS_PC16 *ABS*
4: 00000000 nop
8: 1000ffff b 8 <foo+0x8>
8: R_MIPS_PC16 baz
c: 00000000 nop
$
Add a set of MIPS tests to cover the relevant cases, including absolute
symbols with addends, and verifying that PC-relative relocations against
symbols concerned resolve to the same value in the final link regardless
of whether the REL or the RELA relocation form is used. Exclude linker
tests though which would overflow the in-place addend on REL targets and
use them as dump patterns for RELA targets only.
bfd/
* reloc.c (bfd_perform_relocation): Try the `howto' handler
first with relocations against absolute symbols.
(bfd_install_relocation): Likewise.
gas/
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
* testsuite/gas/mips/branch-absolute.d: New test.
* testsuite/gas/mips/branch-absolute-n32.d: New test.
* testsuite/gas/mips/branch-absolute-n64.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
test.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
test.
* testsuite/gas/mips/branch-absolute.s: New test source.
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute.s: New test
source.
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/branch-absolute.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-n64.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n32.d: New test.
* testsuite/ld-mips-elf/branch-absolute-addend-n64.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute.d: New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n32.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-n64.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d: New
test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n32.d:
New test.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend-n64.d:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests, except
from `branch-absolute-addend' and
`micromips-branch-absolute-addend', referred indirectly only.
In https://sourceware.org/ml/gdb-patches/2016-07/msg00152.html,
Yao noted that a patch of mine was missing a newline.
I thought I had fixed this but when looking today I realized it was
not fixed. This patch adds it.
I'm checking this in as obvious.
2016-07-14 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_deleted): Add missing
newline.
This patch consolidates the (possibly-questionable) spots where we
remove a declaration but continue to call some function for side
effects. In a couple of cases it wasn't entirely clear to me that
this mattered; and in some other cases it might be more aesthetically
pleasing to use ATTRIBUTE_UNUSED. So, I broke this out into a
separate patch for simpler review.
2016-07-14 Tom Tromey <tom@tromey.com>
* arch-utils.c (default_skip_permanent_breakpoint): Remove
"bp_insn".
* disasm.c (do_assembly_only): Remove "num_displayed".
* dwarf2read.c (read_abbrev_offset): Remove "length".
(dwarf_decode_macro_bytes) <DW_MACINFO_vendor_ext>: Remove
"constant".
* m32c-tdep.c (make_regs): Remove "r2hl", "r3hl", and "intbhl".
* microblaze-tdep.c (microblaze_frame_cache): Remove "func".
* tracefile.c (trace_save): Remove "status".
This patch removes some unneeded initializations in overlay code in
symfile.c. It also deletes some old commented-out code.
2016-07-14 Tom Tromey <tom@tromey.com>
* symfile.c (simple_overlay_update_1): Remove initialization
of "size", and commented-out code.
(simple_overlay_update): Likewise.
As suggested by Pedro, this changes a few spots to use getcurx, rather
than getyx. This avoids some unused variable warnings.
2016-07-14 Tom Tromey <tom@tromey.com>
* tui/tui-winsource.c (tui_show_source_line): Use getcurx.
* tui/tui-io.c (tui_puts): Use getcurx.
(tui_redisplay_readline): Likewise.
One spot needed ATTRIBUTE_UNUSED to cope with the new warnings.
The case in inflow.c is just a mass of ifdefs; and while the only use
of "result" is guarded by "#if 0", I thought it simplest to leave it
all in place.
2016-07-14 Tom Tromey <tom@tromey.com>
* inflow.c (child_terminal_ours_1): Use ATTRIBUTE_UNUSED.
This seems to be a real bug found by -Wunused-but-set-variable. If
"stat" fails for some reason, gdb would use the uninitialized "st".
2016-07-14 Tom Tromey <tom@tromey.com>
* corefile.c (reopen_exec_file): Only examine st.st_mtime if stat
succeeded.
The objcopy and strip tools make use of the bfd library to manipulate
the state of the input file (to produce an output file). Within the
input file (for ELF at least), relocations are held within a section,
and so, if the user wanted to remove the relocations, but keep the
section to which the relocations would have been applied, it is tempting
to think that specifying the name of a relocation section to objcopy's
--remove-section option might do what you want, for example:
objcopy --remove-section=.rela.text input.elf output.elf
However, this does not work. The reason is that when the input file is
loaded, relocations are not managed as sections, but are, instead,
loaded as data associated with the section to which the relocations
would be applied. In our example above the relocations in '.rela.text'
are held as data on the section '.text' once 'input.elf' is loaded.
One task that objcopy and strip do is copy the relocations from the
input file to the output file if the section is also being copied from
the input file to the output file.
This commit adds a new command line option for objcopy and strip,
--remove-relocations, which can be used to remove the relocations, while
keeping the section that the relocations would have been applied to, for
example:
objcopy --remove-relocations=.text input.elf output.elf
in this case the section '.text' will appear in both 'input.elf' and
'output.elf', but any relocations in 'input.elf' that apply to '.text'
will not be present in 'output.elf'.
I have also added a special case to the handling of --remove-section
that spots if a user tries to remove a relocation section (currently
this is done by spotting the '.rela.' or '.rel.' prefix) and forwards
the request to --remove-relocations.
As with --remove-section and --only-section the --remove-relocations
option supports the '!' prefix on the section-patterns it takes to allow
for sections to be specifically not matched.
There are tests for all the new functionality.
binutils/ChangeLog:
* doc/binutils.texi (objcopy): Document 'remove-relocations'.
(strip): Likewise.
* objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define.
(enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'.
(struct option strip_options): Add 'remove-relocations'.
(struct option copy_options): Likewise.
(copy_usage): Likewise.
(strip_usage): Likewise.
(handle_remove_relocations_option): New function.
(discard_relocations): New function.
(handle_remove_section_option): New function.
(copy_relocations_in_section): Use discard_relocations.
(strip_main): Use handle_remove_section_option for
'remove-section', and handle 'remove-relocations' option.
(copy_main): Likewise.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* testsuite/binutils-all/remove-relocs-01.d: New file.
* testsuite/binutils-all/remove-relocs-01.s: New file.
* testsuite/binutils-all/remove-relocs-02.d: New file.
* testsuite/binutils-all/remove-relocs-03.d: New file.
* testsuite/binutils-all/remove-relocs-04.d: New file.
* testsuite/binutils-all/remove-relocs-05.d: New file.
* testsuite/binutils-all/remove-relocs-06.d: New file.
For symbol matching, prefixing a pattern with '!' will indicate a
non-matching pattern, however, this is not the case for section
patterns. As a result it is not possible to say "apply this action to
all sections except ...".
With this commit the objcopy and strip tools now support '!' prefix for
section patterns, so we can say:
objcopy --remove-section="*" --remove-section="!.text*"
Which will remove all sections, except those matching the pattern
'.text*'.
binutils/ChangeLog:
* objcopy.c (find_section_list): Handle section patterns starting
with '!' being a non-matching pattern.
* doc/binutils.texi (objcopy): Give example of using '!' with
--remove-section and --only-section.
(strip): Give example of using '!' with --remove-section.
* testsuite/binutils-all/data-sections.s: New file.
* testsuite/binutils-all/only-section-01.d: New file.
* testsuite/binutils-all/remove-section-01.d: New file.
* testsuite/binutils-all/objcopy.exp: Run new tests.
* NEWS: Mention new feature.
* armemu.c (Multiply64): Only issue error messages about invalid
arguments if debugging is enabled.
* armos.c (ARMul_OSHandleSWI): Ignore invalid flags.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
This patch adds some breakpoint events to Python. In particular,
there is a creation event that is emitted when a breakpoint is
created; a modification event that is emitted when a breakpoint
changes somehow; and a deletion event that is emitted when a
breakpoint is deleted.
In this patch, the event's payload is the breakpoint itself. I
considered making a new event type to hold the breakpoint, but I
didn't see a need. Still, I thought I would mention this as a spot
where some other choice is possible.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python/py-evts.c (gdbpy_initialize_py_events): Call
add_new_registry for new events.
* python/py-events.h (events_object) <breakpoint_created,
breakpoint_deleted, breakpoint_modified>: New fields.
* python/py-breakpoint.c (gdbpy_breakpoint_created): Emit the
breakpoint changed event.
(gdbpy_breakpoint_deleted): Emit the breakpoint deleted event.
(gdbpy_breakpoint_modified): New function.
(gdbpy_initialize_breakpoints): Attach to the breakpoint modified
observer.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* python.texi (Events In Python): Document new breakpoint events.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/15620, PR python/18620:
* gdb.python/py-breakpoint.exp (connect_event, check_last_event)
(test_bkpt_events): New procs.
This patch adds a "pending" attribute to gdb.Breakpoint.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* NEWS: Update.
* python/py-breakpoint.c (bppy_get_pending): New function.
(breakpoint_object_getset): Add entry for "pending".
* breakpoint.h (pending_breakpoint_p): Declare.
* breakpoint.c (pending_breakpoint_p): New function.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* python.texi (Breakpoints In Python): Document
Breakpoint.pending.
2016-07-13 Tom Tromey <tom@tromey.com>
PR python/17698:
* gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
test.
(test_watchpoints): Likewise.
(test_bkpt_pending): New proc.
I noticed that bppy_get_visibility and gdbpy_breakpoint_created
implemented their own visibility checks, but subtly different from
user_breakpoint_p. I think the latter is more correct, and so changed
the Python code to use it.
I suspect there isn't a decent way to test this, so no new test.
Built and regtested on x86-64 Fedora 23.
2016-07-13 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (bppy_get_visibility)
(gdbpy_breakpoint_created): Use user_breakpoint_p.
I noticed that the Python breakpoint documentation was ordered a bit
oddly. It documented the constructor; then the stop method; then the
watchpoint constants (used for the constructor); then various other
methods and attributes; then the other constants used by the
constructor; and then finally some more methods and attributes.
This patch rearranges the node a little to move the constants to just
after the constructor and before the other methods and attributes.
2016-07-13 Tom Tromey <tom@tromey.com>
* python.texi (Breakpoints In Python): Move table of types and
table of watchpoint types earlier in node.
PR cli/18053 concerns a couple of minor bugs in the JIT debuginfo
support. First, jit-reader-load should use filename completion and
support tilde expansion. Second, the help for jit-reader-unload is
incorrect. While working on this I also realized that
jit-reader-unload should use the no-op completer, so I've included
that as well.
Built and regtested on x86-64 Fedora 23. A completer test for
jit-reader-load is included, but not a tilde-expansion test, as I
couldn't think of a reliable way to test that.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* jit.c (jit_reader_load_command): Use tilde_expand.
(_initialize_jit): Fix help for jit-reader-unload. Set completer
for new commands.
2016-07-13 Tom Tromey <tom@tromey.com>
PR cli/18053:
* gdb.base/jit-so.exp (one_jit_test): Add jit-reader-load
completion test.
Address issues with the disassembly of the NAL assembly idiom and R6
instruction introduced with commit 7361da2c95 ("Add support for MIPS
R6.") and then further tweaked with commit b9121b573e ("Add in a JALRC
alias and fix the NAL instruction."). As from R6 this instruction has
replaced the encoding of `bltzal $0, . + 4' as the solely supported form
of the former BLTZAL instruction for the regular MIPS ISA.
The instruction is marked as an alias only in our regular MIPS opcode
table, making it fail to disassemble in R6 code if the `no-aliases'
machine option has been passed to `objdump':
$ cat test.s
.text
foo:
nal
$ as -mips64r6 -o test.o test.s
$ objdump -dr --prefix-addresses --show-raw-insn -M no-aliases test.o
nal.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <foo> 04100000 0x4100000
...
$
This is because the `bltzal' entry has been marked as pre-R6 only in the
opcode table and there is no other opcode pattern to match.
Additionally the changes referred made NAL replace the equivalent
`bltzal $0, . + 4' instruction in disassembly, unless the `no-aliases'
machine option has been used, in legacy code. Seeing NAL, especially in
its updated form lacking the branch target argument, in the disassembly
of such code may be confusing to people. This is because unlike with
EHB only used in R2 and newer code -- the machine encoding of which we
anyway always disassemble to its corresponding current architecture's
mnemonic rather than its legacy meaning of `sll $0, $0, 3' -- BLTZAL has
been indeed used in legacy code. Even though `bltzal $0, . + 8' and its
machine code encoding (0x04100001) -- which is not equivalent to NAL and
still disassembles as BLTZAL -- has been the predominant form as opposed
to NAL's `bltzal $0, . + 4' (0x04100000), it makes sense to always keep
the old form in disassembly, while still accepting `nal' in assembly.
Remove the alias marking then from the the `nal' instruction pattern,
making it always match for R6 code, even with the `no-aliases' option.
And move the entry beyond the `bltzal' entry, making the latter one take
precedence for legacy binary code, while letting the former still match
any `nal' mnemonic in source code assembled for a legacy target.
Add a suitable test case to the GAS test suite. While the change
affects the disassembler more than the assembler, so placing the test
case in the binutils test suite might be more appropriate, the intent is
also to verify that `nal' is still accepted by GAS for legacy targets,
plus we have test infrastructure available in the GAS test suite for
automatic multiple ISA level testing, which we lack from the binutils
framework.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS
annotation from the "nal" entry and reorder it beyond "bltzal".
gas/
* testsuite/gas/mips/nal-1.d: New test.
* testsuite/gas/mips/mipsr6@nal-1.d: New test.
* testsuite/gas/mips/nal-2.d: New test.
* testsuite/gas/mips/mipsr6@nal-2.d: New test.
* testsuite/gas/mips/nal.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
This patch adds support for the LDTXA instructions, along with the
corresponding ASIs. Tests for GAS are included.
opcodes/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (ldtxa): New macro.
(sparc_opcodes): Use the macro defined above to add entries for
the LDTXA instructions.
(asi_table): Add the ASI_TWINX_* asis used in the LDTXA
instruction.
gas/ChangeLog:
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/ldtxa.s: New file.
* testsuite/gas/sparc/ldtxa.d: Likewise.
* testsuite/gas/sparc/sparc.exp: Execute the ldtxa test.
Marin Cermak has found various testcases (or one of them) of GDB FAIL on
ppc64.
https://sourceware.org/bugzilla/show_bug.cgi?id=20328
.o contained only the function descriptor address.
The DWARF as produced by Tcl Dwarf::assemble:
<1><27>: Abbrev Number: 4 (DW_TAG_subprogram)
<28> DW_AT_name : main
<2d> DW_AT_external : 1
<2e> DW_AT_low_pc : 0x1001ff98
<36> DW_AT_high_pc : 0x1002ff98
<2><3e>: Abbrev Number: 5 (DW_TAG_lexical_block)
Runtime info:
$2 = {<text variable, no debug info>} 0x10000674 <.main>
$3 = {void ()} 0x1001ff98 <main>
On Tue, 12 Jul 2016 15:22:49 +0200, Ulrich Weigand wrote:
Well, most of the gdb.dwarf2 test cases simply use explicitly placed labels
for the DW_AT_low_pc / DW_AT_high_pc attributes.
See e.g. dw2-unresolved-main.c:
asm (".globl cu_text_start");
asm ("cu_text_start:");
On Wed, 13 Jul 2016 10:54:00 +0200, Jan Kratochvil wrote:
Now I see I should not do that because:
lib/dwarf.exp:
proc function_range { func src } {
So I am providing this patch.
gdb/testsuite/ChangeLog
2016-07-13 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.dwarf2/atomic-type.exp: Use function_range for low_pc and high_pc.
* gdb.dwarf2/atomic.c (f): Rename f_end_lbl to f_label.
* gdb.dwarf2/dw2-bad-mips-linkage-name.c (f): Rename f_end_lbl to
f_label.
(g): Rename g_end_lbl to g_label.
* gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Use function_range for
low_pc and high_pc.
* gdb.dwarf2/dw2-lexical-block-bare.exp: Likewise.
Align x86-64 .got and .got.plt sections to their entry size.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Align
.got/.got.plt sections to 8 bytes.
PR python/19293 notes that when a Python unwinder is disabled, the
frame cache is not invalidated. This means that disabling an unwinder
doesn't have any immediate effect -- but in my experience it's often
the case that I want to enable or disable an unwinder in order to see
what happens.
This patch adds a new gdb.invalidate_cached_frames function and
arranges for the relevant bits of library code to call it. I've only
partially documented this function, considering a warning sufficient
without going into all the reasons ordinary code should not call it.
The name of the new function was taken from a comment in frame.h next
to reinit_frame_cache.
No new test as I think the updates to the existing test are sufficient
to show that the code is working as intended.
Built and regtested on x86-64 Fedora 23.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python/lib/gdb/command/unwinders.py (do_enable_unwinder): Call
gdb.invalidate_cached_frames.
* python/lib/gdb/unwinder.py (register_unwinder): Call
gdb.invalidate_cached_frames.
* python/python.c (gdbpy_invalidate_cached_frames): New function.
(python_GdbMethods): Add entry for invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* python.texi (Frames In Python): Document
gdb.invalidate_cached_frames.
2016-07-12 Tom Tromey <tom@tromey.com>
PR python/19293:
* gdb.python/py-unwind-maint.exp: Update tests.
In gdb.gdb/observer.exp, I see the following fail,
(gdb) break captured_main^M
Breakpoint 1 at 0x57e409: file ../../binutils-gdb/gdb/main.c, line 492.^M
(gdb) PASS: gdb.gdb/observer.exp: breakpoint in captured_main
run -nw -nx -data-directory /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/../data-directory^M
Starting program: /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/outputs/gdb.gdb/observer/xgdb -nw -nx -data-directory /home/yao.qi/SourceCode/gnu/build/gdb/testsuite/../data-directory^M
[Thread debugging using libthread_db enabled]^M
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".^M
^M
Breakpoint 1, gdb_main (args=args@entry=0x7fffffffdca0) at ../../binutils-gdb/gdb/main.c:1157^M
1157 captured_main (args);^M
(gdb) FAIL: gdb.gdb/observer.exp: run until breakpoint at captured_main
looks the test sets breakpoint on captured_main, and expects program
stops at captured_main. However, program stops at the place where
captured_main is called, because captured_main is inlined,
<1><8519e3>: Abbrev Number: 58 (DW_TAG_subprogram)
<8519e4> DW_AT_name : (indirect string, offset: 0x880d3): captured_main
<8519e8> DW_AT_decl_file : 1
<8519e9> DW_AT_decl_line : 444
<8519eb> DW_AT_type : <0x846e48>
<8519ef> DW_AT_inline : 1 (inlined)
<8519f0> DW_AT_sibling : <0x851c01>
The test passes if I build GDB with '-O0 -g3', because captured_main
isn't inlined. This patch is to match the output when captured_main
is inlined.
gdb/testsuite:
2016-07-12 Yao Qi <yao.qi@linaro.org>
* lib/selftest-support.exp (selftest_setup): Match the output
when captured_main is inlined.
gas/ChangeLog:
2016-07-05 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (arc_reloc_op_tag): Allow complex ops for dtpoff.
(tc_gen_reloc): Remove passing DTPOFF base info into reloc addendum as it is
no longer needed.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
binutils/
PR binutils/20337
* objdump.c (compare_symbols): For ELF, sort same value/type
symbols according to size.
ld/
* testsuite/ld-powerpc/elfv2exe.d: Update.
