* mips.cc (Mips_got_entry::Mips_got_entry): Remove object argument
for global got symbols, and set addend to 0.
(Mips_got_entry::hash): Change hash algorithm.
(Mips_got_entry::equals): Refactor.
(Mips_got_entry::object): Return input object for local got symbols
from union d.
(Mips_got_entry::addend): Change return of the relocation addend.
(Mips_got_entry::addend_): Move from union d.
(Mips_got_entry::object_): Move into union d.
(class Mips_symbol_hash): New class.
(Mips_got_info::Global_got_entry_set): New type.
(Mips_got_info::global_got_symbols): Change return type to
Global_got_entry_set.
(Mips_got_info::global_got_symbols_): Change type to
Global_got_entry_set.
(Mips_symbol::hash): New method.
(Mips_output_data_la25_stub::symbols_): Change type to std::vector.
(Mips_output_data_mips_stubs::Mips_stubs_entry_set): New type.
(Mips_output_data_mips_stubs::symbols_): Change type to
Mips_stubs_entry_set.
(Mips_got_info::record_global_got_symbol): Don't pass object
argument when creating global got symbol.
(Mips_got_info::record_got_entry): Remove find before inserting
got entries.
(Mips_got_info::add_reloc_only_entries): Change type of iterator
to Global_got_entry_set.
(Mips_got_info::count_got_symbols): Likewise.
(Mips_output_data_la25_stub::create_la25_stub): Use push_back
for adding entries to symbols_.
(Mips_output_data_la25_stub::do_write): Change type of iterator
to std::vector.
(Mips_output_data_mips_stubs::set_lazy_stub_offsets): Change type
of iterator to Mips_stubs_entry_set.
(Mips_output_data_mips_stubs::set_needs_dynsym_value): Likewise.
(Mips_output_data_mips_stubs::do_write): Likewise.
Don't convert R_386_GOT32 since we can't tell if it is applied
to "mov $foo@GOT, %reg" which isn't a load via GOT.
bfd/
PR ld/20117
* elf32-i386.c (elf_i386_convert_load_reloc): Don't check
R_386_GOT32X.
(elf_i386_convert_load): Don't convert R_386_GOT32.
ld/
PR ld/20117
* testsuite/ld-i386/i386.exp: Run pr20117.
* testsuite/ld-i386/pr19609-1i.d: Updated.
* testsuite/ld-i386/pr20117.d: New file.
* testsuite/ld-i386/pr20117.s: Likewise.
2016-05-19 Cupertino Miranda <cmiranda@synopsys.com>
* emulparams/arcelf.sh: Changed.
* emulparams/arclinux.sh: Likewise.
* scripttempl/arclinux.sc: Moved to a more standard implementation
similar to elf.sc.
The `am34-*-linux*' target cannot be configured for, `am34' is not a CPU
name recognized by `config.sub'. It has never been, required code has
not been contributed to GNU config, neither before nor since the
addition of the target triplet to our configury with commit bfff164249
("Add MN10300 linker relaxation support for symbol differences") back in
2007. Also there is no difference in actual tool configuration between
the `am34-*-linux*' and `am33_2.0-*-linux*' targets, except from a
different executable prefix and tooldir name.
Given the above remove the target triplet from our configuration.
bfd/
* config.bfd: Remove `am34-*-linux*' support.
ld/
* configure.tgt: Remove `am34-*-linux*' support.
A different set of hacks to make the crossref tests pass on powerpc64
and powerpc64le.
* testsuite/ld-scripts/crossref.exp: Remove -mcall-aixdesc hack.
* testsuite/ld-scripts/cross2.t: Tweak .opd and .toc placement.
* testsuite/ld-scripts/cross3.t: Likewise.
* testsuite/ld-scripts/cross4.t: Likewise.
* testsuite/ld-scripts/cross5.t: Likewise.
* testsuite/ld-scripts/cross6.t: Likewise.
* testsuite/ld-scripts/cross7.t: Likewise.
Tweaks to make it easier to re-run these testcases by hand.
* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): Pass in
exe name rather than constructing testname. Fix typo in
sub-test name. Log copying. Use -rpath rather than -R.
The idea being to make undefined weak syms dynamic, before deciding
whether a sym needs a plt entry. Fixes pr19719 ld testcase.
* elf64-ppc.c (allocate_dynrelocs): Allocate got and other dynamic
relocs before plt relocs.
By making the flgp field of struct arc_flags constant we can remove a
place where we cast away the const-ness of a variable. Also, given that
the value assigned to this field almost always comes from compile-time
constant data, having the field non-constant is probably a bad thing.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Remove casting away of
const.
* config/tc-arc.h (struct arc_flags): Make flgp field const.
Some debug code has the wrong printf format specifier for some types
that are (ultimately) bfd_vma. Fixed by using BFD_VMA_FMT string. This
only becomes an issue when building the tc-arc.c file with -DDEBUG=1 to
build in the debug code.
gas/ChangeLog:
* config/tc-arc.c (md_pcrel_from_section): Use BFD_VMA_FMT where
appropriate.
(md_convert_frag): Likewise.
The opcode array iterator mechanism can, in some situations, result in
reading memory outside of the opcode array. When using the
iterator-next mechanism to find the next possible arc_opcode, if we find
an opcode where the name field is NULL, or the name does not match, then
the cached opcode pointer is not set to NULL. The result is that
another call to iterator-next will again increment the opcode
pointer (which might now point outside the opcode array) and attempt to
access the name field of this undefined opcode.
Fixed in this commit by clearing the cached opcode pointer.
I've added a test case, which currently shows the bug, however, this
will only expose this bug while the opcode used (dsp_fp_cmp) is the last
opcode in the table.
gas/ChangeLog:
* config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set
cached opcode to NULL when we reach a non-matching opcode.
* testsuite/gas/arc/asm-errors-2.d: New file.
* testsuite/gas/arc/asm-errors-2.err: New file.
* testsuite/gas/arc/asm-errors-2.s: New file.
Currently supplying an input file with too many operands to an
instruction will cause the assembler to overflow and array and trigger
undefined behaviour.
This change checks that we don't access outside the limits of the
operand array.
gas/ChangeLog:
* config/tc-arc.c (tokenize_arguments): Add checks for array
overflow.
* testsuite/gas/arc/asm-errors.s: Addition test line added.
* testsuite/gas/arc/asm-errors.err: Update expected results.
Add a new test for PR 20039. The test spawns new threads, then tries to
interrupt, continue, and interrupt again. This use case was fixed by
commit 5fe966540d in master, but gdb 7.11
is affected (so if you try it on the gdb-7.11-branch right now, the test
will fail).
New in v2, the test now handles mi-async on mode properly. The failure
was specific to mi-async off, but I don't think it's bad to test the
same thing under async on mode. I added a little hack when running in
async mode to work around bug 20045.
I also removed one continue/interrupt pair, as a single one was enough to
trigger the problem.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-threads-interrupt.c: New file.
* gdb.mi/mi-threads-interrupt.exp: New file.
When you use a run control command (-exec-run, -exec-continue,
-exec-next, ...) with mi-async on, an extra (gdb) prompt is displayed:
-exec-continue
^running
*running,thread-id="all"
(gdb)
(gdb)
It doesn't seem to be a big problem for front-ends, since this behavior
started in gdb 7.9 and we haven't heard anything about that. However,
it caused me some trouble while writing a test for PR 20039 [1].
The problem comes from an extra (gdb) prompt that we write when running
in mi-async off mode to emulate a past buggy behavior. When executing a
run control command synchronously, previous gdbs always printed a prompt
right away, even though they are not ready to accept new MI commands
until the target stops. Only at this time should they display a prompt.
But to keep backwards compatibility apparently, we print it anyway.
Since commit 198297aaf, the condition that decides whether we should
print that "bogus" prompt or not has become true, even when running with
mi-async on. Since we already print a prompt at the end of the
asynchronous command execution, it results in two prompts for one
command.
The proposed fix is to call target_can_async_p instead of
target_is_async_p, to make the condition:
if (!target_can_async_p () || sync_execution)
... show prompt ...
That shows the prompt if we are emulating a synchronous command on top
of an asynchronous target (sync_execution) or if the target simply can't
run asynchronously (!target_can_async_p ()).
Note that this code is changed and this bug fixed by Pedro's separate
console series, but I think it would be nice to have it fixed in the
mean time.
I ran the gdb.mi directory of the testsuite with mi-async on and off, I
didn't see any regressions.
gdb/ChangeLog:
* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
of target_is_async_p.
[1] https://sourceware.org/ml/gdb-patches/2016-05/msg00075.html
Mixing MIPS16 and microMIPS code in a single binary isn't usually
supported but GAS happily produces such code if requested. However it
is not correctly disassembled even if a symbol table is available and
function symbols are correctly anotated with the ISA mode. This is
because the ELF-header global microMIPS ASE flag takes precedence over
MIPS16 function annotation, causing them to be treated as regular MIPS
code.
Correct the problem by respecting function symbol anotation regardless
of the ELF-header flag.
binutils/
* testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test.
* testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new test.
opcodes/
* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
replacing references to `micromips_ase' throughout.
(_print_insn_mips): Don't use file-level microMIPS annotation to
determine the disassembly mode with the symbol table.
gas/ChangeLog:
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-rx.c (struct cpu_type): Change the type of a field from
int to enum rx_cpu_types.
gas/ChangeLog:
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-dlx.c (struct machine_it): change the type of a field from
int to bfd_reloc_code_real_type.
* config/tc-tic4x.c: Likewise.
* scripttempl/ft32.sc: Use fixed constants for memory region
lengths. Include DWARF debug sections.
(.data .bss): Do not assign locations during relocatable links.
* testsuite/ld-elf/compressed1d.d: Skip for FT32.
* testsuite/ld-elf/sec-to-seg.exp: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-elf/init-fini-array.d: XFail for FT32.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/orphan-region.d: Likewise.
* testsuite/ld-elf/orphan.s: Likewise.
* testsuite/ld-elf/orphan3.d: Likewise.
* testsuite/ld-elf/pr349.d: Likewise.
* testsuite/ld-elf/warn2.d: Likewise.
* testsuite/lib/ld-lib.exp (check_shared_lib_support): Note
that the FT32 does not support shared libraries.
binutils/
* readelf.c (dynamic_section_mips_val) <DT_MIPS_RLD_VERSION>
<DT_MIPS_LOCAL_GOTNO, DT_MIPS_CONFLICTNO, DT_MIPS_LIBLISTNO>
<DT_MIPS_SYMTABNO, DT_MIPS_UNREFEXTNO, DT_MIPS_HIPAGENO>
<DT_MIPS_DELTA_CLASS_NO, DT_MIPS_DELTA_INSTANCE_NO>
<DT_MIPS_DELTA_RELOC_NO, DT_MIPS_DELTA_SYM_NO>
<DT_MIPS_DELTA_CLASSSYM_NO, DT_MIPS_COMPACT_SIZE>: Use the
`d_val' rather than `d_ptr' member of the dynamic entry.
Commit b84bf58a accidentally extended the range of allowed negative
numbers.
* config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT
allowed negative range.
* testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256.
* testsuite/gas/ppc/power9.d: Update.
When doing -exec-run on a freshly started GDB, the only target on the
target stack at the time the dummy one. When mi_async_p is called to
know whether the run should be async, it queries whether the current
target (dummy) supports async, and the answer is no. The fix is to make
the code query the target that will be used for the run, which is not
necessarily the current target.
No regressions in the gdb.mi directory using the unix, native-gdbserver
and native-extended-gdbserver boards. The test doesn't pass when
forcing maint set target-async off, obviously, since it makes mi-async
have no effect. It doesn't seem like other tests are checking for that
eventuality, so I didn't in the new test.
gdb/ChangeLog:
* mi/mi-main.c (run_one_inferior): Use run target to determine
whether to run async or not.
(mi_cmd_exec_run): Likewise.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-async-run.exp: New file.
* gdb.mi/mi-async-run.c: New file.
This patch adds documentation for the new Rust support in gdb.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add Rust item.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Supported Languages): Mention Rust. Update menu.
(Rust): New node.
This updates the gdb test suite for Rust.
2016-05-17 Tom Tromey <tom@tromey.com>
Manish Goregaokar <manishsmail@gmail.com>
* lib/rust-support.exp: New file.
* lib/gdb.exp (skip_rust_tests): New proc.
(build_executable_from_specs): Handle rust.
* lib/future.exp (gdb_find_rustc): New proc.
(gdb_default_target_compile): Handle rust.
* gdb.rust/expr.exp: New file.
* gdb.rust/generics.exp: New file.
* gdb.rust/generics.rs: New file.
* gdb.rust/methods.exp: New file.
* gdb.rust/methods.rs: New file.
* gdb.rust/modules.exp: New file.
* gdb.rust/modules.rs: New file.
* gdb.rust/simple.exp: New file.
* gdb.rust/simple.rs: New file.
For Rust value-printing, I wanted to use generic_val_print_array, but
I also wanted to control the starting and ending strings.
This patch adds new strings to generic_val_print_decorations, updates
generic_val_print_array to use them, and updates all the existing
instances of generic_val_print_decorations.
2016-05-17 Tom Tromey <tom@tromey.com>
* valprint.h (struct generic_val_print_array) <array_start,
array_end>: New fields.
* valprint.c (generic_val_print_array): Add "decorations"
parameter. Use "array_start", "array_end".
(generic_val_print) <TYPE_CODE_ARRAY>: Update.
* p-valprint.c (p_decorations): Update.
* m2-valprint.c (m2_decorations): Update.
* f-valprint.c (f_decorations): Update.
* c-valprint.c (c_decorations): Update.
I wanted to unit test the Rust lexer, so I added a simple unit testing
command to gdb.
The intent is that self tests will only be compiled into gdb in
development mode. In release mode they simply won't exist. So, this
exposes $development to C code as GDB_SELF_TEST.
In development mode, test functions are registered with the self test
module. A test function is just a function that does some checks, and
throws an exception on failure.
Then this adds a new "maint selftest" command which invokes the test
functions, and a new dejagnu test case that invokes it.
2016-05-17 Tom Tromey <tom@tromey.com>
* NEWS: Add "maint selftest" entry.
* selftest.h: New file.
* selftest.c: New file.
* maint.c: Include selftest.h.
(maintenance_selftest): New function.
(_initialize_maint_cmds): Add "maint selftest" command.
* configure.ac (GDB_SELF_TEST): Maybe define.
* config.in, configure: Rebuild.
* Makefile.in (SFILES): Add selftest.c.
(COMMON_OBS): Add selftest.o.
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.texinfo (Maintenance Commands): Document "maint selftest".
2016-05-17 Tom Tromey <tom@tromey.com>
* gdb.gdb/unittest.exp: New file.
print_subexp_standard and dump_subexp_body_standard did not handle
OP_F90_RANGE. Attempting to dump an expression using this opcode
would fail.
This patch adds support for this opcode to these functions.
2016-05-17 Tom Tromey <tom@tromey.com>
* expprint.c: Include f-lang.h.
(print_subexp_standard, dump_subexp_body_standard): Handle
OP_F90_RANGE.
gdb's Makefile.in does not currently scan .y files to add global
initializers from these files to init.c. However, at least ada-exp.y
tries to use this feature.
This patch fixes the problem.
2016-05-17 Tom Tromey <tom@tromey.com>
* Makefile.in (init.c): Search .y files for initialization
functions.
