The result of running etc/update-copyright.py --this-year, fixing all
the files whose mode is changed by the script, plus a build with
--enable-maintainer-mode --enable-cgen-maint=yes, then checking
out */po/*.pot which we don't update frequently.
The copy of cgen was with commit d1dd5fcc38ead reverted as that commit
breaks building of bfp opcodes files.
The CGEN support code in opcodes accesses instruction contents using a
couple of functions defined in cgen-opc.c: cgen_get_insn_value and
cgen_put_insn_value. These functions use the "instruction endianness"
in the CPU description to order the read/written bytes.
The process of writing an instruction to the object file is:
a) cgen_put_insn_value ;; Writes out the opcodes.
b) ARCH_cgen_insert_operand
insert_normal
insert_1
cgen_put_insn_value ;; Writes out the bytes of the
;; operand.
Likewise, the process of reading an instruction from the object file
is:
a) cgen_get_insn_value ;; Reads the opcodes.
b) ARCH_cgen_extract_operand
extract_normal
extract_1
cgen_get_insn_value ;; Reads in the bytes of the
;; operand.
As can be seen above, cgen_{get,put}_insn_value are used to both
process the instruction opcodes (the constant fields conforming the
base instruction) and also the values of the instruction operands,
such as immediates.
This is problematic for architectures in which the endianness of
instructions is different to the endianness of data. An example is
BPF, where instructions are always encoded big-endian but the data may
be either big or little.
This patch changes the cgen_{get,put}_insn_value functions in order to
get an extra argument with the endianness to use, and adapts the
existin callers to these functions in order to provide cd->endian or
cd->insn_endian, whatever appropriate. Callers like extract_1 and
insert_1 pass cd->endian (since they are reading/writing operand
values) while callers reading/writing the base instruction pass
cd->insn_endian instead.
A few little adjustments have been needed in some existing CGEN based
ports:
* The BPF assembler uses cgen_put_insn_value. It has been adapted to
pass the new endian argument.
* The mep port has code in mep.opc that uses cgen_{get,put}_insn_value.
It has been adapted to pass the new endianargument. Ditto for a
call in the assembler.
Tested with --enable-targets=all.
Regested in all supported targets.
No regressions.
include/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/cgen.h: Get an `endian' argument in both
cgen_get_insn_value and cgen_put_insn_value.
opcodes/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen-opc.c (cgen_get_insn_value): Get an `endian' argument.
(cgen_put_insn_value): Likewise.
(cgen_lookup_insn): Pass endianness to cgen_{get,put}_insn_value.
* cgen-dis.in (print_insn): Likewise.
* cgen-ibld.in (insert_1): Likewise.
(insert_1): Likewise.
(insert_insn_normal): Likewise.
(extract_1): Likewise.
* bpf-dis.c: Regenerate.
* bpf-ibld.c: Likewise.
* bpf-ibld.c: Likewise.
* cgen-dis.in: Likewise.
* cgen-ibld.in: Likewise.
* cgen-opc.c: Likewise.
* epiphany-dis.c: Likewise.
* epiphany-ibld.c: Likewise.
* fr30-dis.c: Likewise.
* fr30-ibld.c: Likewise.
* frv-dis.c: Likewise.
* frv-ibld.c: Likewise.
* ip2k-dis.c: Likewise.
* ip2k-ibld.c: Likewise.
* iq2000-dis.c: Likewise.
* iq2000-ibld.c: Likewise.
* lm32-dis.c: Likewise.
* lm32-ibld.c: Likewise.
* m32c-dis.c: Likewise.
* m32c-ibld.c: Likewise.
* m32r-dis.c: Likewise.
* m32r-ibld.c: Likewise.
* mep-dis.c: Likewise.
* mep-ibld.c: Likewise.
* mt-dis.c: Likewise.
* mt-ibld.c: Likewise.
* or1k-dis.c: Likewise.
* or1k-ibld.c: Likewise.
* xc16x-dis.c: Likewise.
* xc16x-ibld.c: Likewise.
* xstormy16-dis.c: Likewise.
* xstormy16-ibld.c: Likewise.
gas/ChangeLog:
2020-06-04 Jose E. Marchesi <jose.marchesi@oracle.com>
* cgen.c (gas_cgen_finish_insn): Pass the endianness to
cgen_put_insn_value.
(gas_cgen_md_apply_fix): Likewise.
(gas_cgen_md_apply_fix): Likewise.
* config/tc-bpf.c (md_apply_fix): Pass data endianness to
cgen_put_insn_value.
* config/tc-mep.c (mep_check_ivc2_scheduling): Pass endianness to
cgen_put_insn_value.
cpu/ChangeLog:
2020-06-02 Jose E. Marchesi <jose.marchesi@oracle.com>
* mep.opc (print_slot_insn): Pass the insn endianness to
cgen_get_insn_value.
* config/tc-mep.c (md_pseudo_table): Remove dwarf2 pseudo
as they are already defined in obj-elf.c
* config/tc-m32c.c (md_pseudo_table): Ditto.
* config/tc-spu.c (md_pseudo_table): Ditto.
* config/tc-avr.c (md_pseudo_table): Ditto.
32 bits for relaxable branches so that we can relax them later.
(md_estimate_size_before_relax): Assume IVC2 branches will be relaxed.
(mep_relax_frag): New.
(md_convert_frag): Relax IVC2 branches in-place.
* config/tc-mep.h ((mep_relax_frag): New.
EF_IA_64_ARCHVER_1): New macros. Minor reformatting.
* bfd/Makefile.am (BFD32_BACKENDS): Add new object vmsutil.lo
(BFD32_BACKENDS_CFILES): Add new file vmsutil.c
(vmsutil.lo): Add dependency rule
* bfd/Makefile.in: Regenerate
* bfd/config.bfd (ia64*-*-*vms*): Add case.
* bfd/configure.in (bfd_elf64_ia64_vms_vec): Add case.
* bfd/configure: Regenerate
* bfd/vmsutil.[ch]: New files
* bfd/elf-bfd.h (struct bfd_elf_special_section): Change type of
attr to bfd_vma.
* bfd/elfxx-ia64.c (elfNN_vms_post_process_headers,
elfNN_vms_section_processing, elfNN_vms_final_write_processing,
elfNN_vms_close_and_cleanup, elfNN_vms_section_from_shdr,
elfNN_vms_object_p): New functions
* bfd/targets.c (bfd_elf64_ia64_vms_vec): New target.
* gas/configure.tgt(ia64-*-*vms*): New target.
* gas/dwarf2dbg.h (dwarf2_loc_mark_labels): Make extern.
* gas/tc.h (md_number_to_chars): Declare iff undefined.
* gas/config/obj-elf.c (obj_elf_change_section): Change type of
arg attr to bfd_vma.
(obj_elf_parse_section_letters): Return a bfd_vma. Change type of
variables attr, md_attr to bfd_vma.
(obj_elf_section_word): Likewise.
(obj_elf_section): Change type of variable attr to bfd_vma
* gas/config/obj-elf.h (obj_elf_change_section): Change type of
arg attr to bfd_vma
* gas/config/tc-ia64.c (bfdver.h,time.h): Include.
(ia64_elf_section_letter): Now returns a bfd_vma.
Handle VMS specific attributes.
(ia64_elf_section_flags): Arg attr now a bfd_vma.
(ia64_init): Don't turn on dependency checking for VMS.
(ia64_target_format): Check for VMS flag bit.
(do_alias): Hande decc$ functions.
(get_vms_time): New function.
(ia64_vms_note): New function.
* gas/config/tc-ia64.h (ia64_elf_section_letter): Now returns a bfd_vma.
(ia64_elf_section_flags): Arg attr now a bfd_vma.
(tc_init_after_args): Define for VMS.
* gas/config/tc-alpha.c (alpha_elf_section_letter): Return a bfd_vma.
(alpha_elf_section_flags): Change type of arg attr to bfd_vma.
* gas/config/tc-alpha.h: Likewise.
* gas/config/tc-i386.c (x86_64_section_letter): Return a bfd_vma.
(x86_64_section_word): Return a bfd_vma.
* gas/config/tc-i386.h: Likewise.
* gas/config/tc-ip2k.c (ip2k_elf_section_flags): Change type of arg
attr to bfd_vma.
* gas/config/tc-ip2k.h: Likewise.
* gas/config/tc-mep.c (mep_elf_section_letter): Return a bfd_vma.
(mep_elf_section_flags): Change type of arg attr to bfd_vma.
* gas/config/tc-mep.h: Likewise.
* gas/config/tc-ppc.c (ppc_section_letter): Return a bfd_vma.
(ppc_section_word): Return a bfd_vma.
(ppc_section_flags): Change type of arg attr to bfd_vma.
* gas/config/tc-ppc.h: Likewise.
* gas/config/te-vms.h (DWARF2_DIR_SHOULD_END_WITH_SEPARATOR,
DWAR2_FILE_TIME_NAME, DWARF2_FILE_SIZE_NAME, DWARF2_FILEN_NAME):
New file with new macros
* gas/dwarf2dbg.c (get_filenum, out_file_list): Default and call new
macros.