2021-11-26 John David Anglin <danglin@gcc.gnu.org>
PR ld/27442
ld/ChangeLog:
* ld/testsuite/ld-ifunc/ifunc.exp (contains_irelative_reloc): Adjust
regexp.
Skip static ifunc-using executable test on hppa*-*-*.
The test must be done with the shared object and not with the object
file which is already being tested above.
ld/
* testsuite/ld-elfvsb/elfvsb.exp: use .so file in "weak hidden
symbol DSO last"
This is the original discussion,
https://github.com/riscv/riscv-elf-psabi-doc/pull/190
And here is the glibc part,
https://sourceware.org/pipermail/libc-alpha/2021-August/129931.html
For binutils part, we need to support a new direcitve: .variant_cc.
The function symbol marked by .variant_cc means it need to be resolved
directly without resolver for dynamic linker. We also add a new dynamic
entry, STO_RISCV_VARIANT_CC, to indicate there are symbols with the
special attribute in the dynamic symbol table of the object.
I heard that llvm already have supported this in their mainline, so
I think it's time to commit this.
bfd/
* elfnn-riscv.c (riscv_elf_link_hash_table): Added variant_cc
flag. It is used to check if relocations for variant CC symbols
may be present.
(allocate_dynrelocs): If the symbol has STO_RISCV_VARIANT_CC
flag, then raise the variant_cc flag of riscv_elf_link_hash_table.
(riscv_elf_size_dynamic_sections): Added dynamic entry for
variant_cc.
(riscv_elf_merge_symbol_attribute): New function, used to merge
non-visibility st_other attributes, including STO_RISCV_VARIANT_CC.
binutils/
* readelf.c (get_riscv_dynamic_type): New function.
(get_dynamic_type): Called get_riscv_dynamic_type for riscv targets.
(get_riscv_symbol_other): New function.
(get_symbol_other): Called get_riscv_symbol_other for riscv targets.
gas/
* config/tc-riscv.c (s_variant_cc): Marked symbol that it follows a
variant CC convention.
(riscv_elf_copy_symbol_attributes): Same as elf_copy_symbol_attributes,
but without copying st_other. If a function symbol has special st_other
value set via directives, then attaching an IFUNC resolver to that symbol
should not override the st_other setting.
(riscv_pseudo_table): Support variant_cc diretive.
* config/tc-riscv.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Defined.
* testsuite/gas/riscv/variant_cc-set.d: New testcase.
* testsuite/gas/riscv/variant_cc-set.s: Likewise.
* testsuite/gas/riscv/variant_cc.d: Likewise.
* testsuite/gas/riscv/variant_cc.s: Likewise.
include/
* elf/riscv.h (DT_RISCV_VARIANT_CC): Defined to (DT_LOPROC + 1).
(STO_RISCV_VARIANT_CC): Defined to 0x80.
ld/
* testsuite/ld-riscv-elf/variant_cc-1.s: New testcase.
* testsuite/ld-riscv-elf/variant_cc-2.s: Likewise.
* testsuite/ld-riscv-elf/variant_cc-now.d: Likewise.
* testsuite/ld-riscv-elf/variant_cc-r.d: Likewise.
* testsuite/ld-riscv-elf/variant_cc-shared.d: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
PR 28452
bfd * elf.c (assign_file_positions_for_non_load_sections): Replace
assertion with a warning message.
ld * ldgram.y: Add support for PT_GNU_RELRO and PT_GNU_PROPERTY.
* ldgram.c: Regenerate.
ld/
* testsuite/ld-aarch64/dt_textrel.d: Pass explicit -z notext in
case ld was configured with --enable-textrel-check=error.
* testsuite/ld-aarch64/pr22764.d: Likewise.
* testsuite/ld-aarch64/pr20402.d: Likewise.
R_PPC64_REL24_P9NOTOC is a variant of R_PPC64_REL24_NOTOC for use on
@notoc cals from non-power10 code in the rare case that using such a
construct is useful. R_PPC64_REL24_P9NOTOC will be emitted by gas
rather than R_PPC64_REL24_NOTOC when @notoc is used in a branch
instruction if power10 instructions are not enabled at that point.
The new relocation tells the linker to not use power10 instructions on
any stub emitted for that branch, unless overridden by
--power10-stubs=yes.
The current linker heuristic of only generating power10 instructions
for stubs if power10-only relocations are detected, continues to be
used.
include/
* elf/ppc64.h (R_PPC64_REL24_P9NOTOC): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_REL24_P9NOTOC): Define.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entry for new reloc.
(ppc64_elf_reloc_type_lookup): Handle it.
(enum ppc_stub_type): Delete.
(enum ppc_stub_main_type, ppc_stub_sub_type): New.
(struct ppc_stub_type): New.
(struct ppc_stub_hash_entry): Use the above new type.
(struct ppc_link_hash_table): Update stub_count.
(is_branch_reloc, ppc64_elf_check_relocs),
(toc_adjusting_stub_needed): Handle new reloc.
(stub_hash_newfunc, select_alt_stub, ppc_merge_stub),
(ppc_type_of_stub, plt_stub_size, build_plt_stub),
(build_tls_get_addr_head, build_tls_get_addr_tail),
(ppc_build_one_stub, ppc_size_one_stub, ppc64_elf_size_stubs),
(ppc64_elf_build_stubs, ppc64_elf_relocate_section): Handle new
reloc. Modify stub handling to suit new scheme.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
gas/
* config/tc-ppc.c (ppc_elf_suffix): When power10 is not enabled
return BFD_RELOC_PPC64_REL24_P9NOTOC for @notoc.
(fixup_size, ppc_force_relocation, ppc_fix_adjustable): Handle
BFD_RELOC_PPC64_REL24_P9NOTOC.
ld/
* testsuite/ld-powerpc/callstub-2.s: Add .machine power10.
A couple of files changed on my latest --enable-maintainer-mode
build. ld/Makefile.in had a missing dependency but better sorting of
the loongson entries.
intl/
* configure: Regenerate.
ld/
* Makefile.am: Sort loongson entries.
* Makefile.in: Regenerate.
Previous flags were aimed to be run with XLC.
Nowadays, only GCC is being tested with GNU toolchain. Moreover,
recent XLC versions might also accept "-shared".
* testsuite/ld-shared/shared.exp: Adjust shared flags.
Newer versions of bison emit a prototype for yyerror
void yyerror (const char *);
This clashes with some of our old code that declares yyerror to return
an int. Fix that in most cases by modernizing yyerror. bfin-parse.y
uses the return value all over the place, so for there disable
generation of the prototype as specified by posix.
binutils/
* arparse.y (yyerror): Return void.
* dlltool.c (yyerror): Likewise.
* dlltool.h (yyerror): Likewise.
* sysinfo.y (yyerror): Likewise.
* windmc.h (yyerror): Likewise.
* mclex.c (mc_error): Extract from ..
(yyerror): ..here, both now returning void.
gas/
* config/bfin-parse.y (yyerror): Define.
(yyerror): Make static.
* itbl-parse.y (yyerror): Return void.
ld/
* deffilep.y (def_error): Return void.
yyleng gives the pattern length, xstrdup just copies up to the NUL.
So it is quite possible writing at an index of yyleng-2 overflows
the xstrdup allocated string buffer. xmemdup quite handily avoids
this problem, even writing the terminating NUL over the trailing
quote. Use it in ldlex.l too where we'd already had a report of this
problem and fixed it by hand, and to implement xmemdup0 in gas.
binutils/
* deflex.l (single and double quote strings): Use xmemdup.
gas/
* as.h (xmemdup0): Use xmemdup.
ld/
PR 20906
* ldlex.l (double quote string): Use xmemdup.
ctf_type_visit (used, among other things, by the type dumping code) was
aborting when it saw a nonrepresentable type anywhere: even a single
structure member with a nonrepresentable type caused an abort with
ECTF_NONREPRESENTABLE. This is not useful behaviour, given that the
abort comes from a type-resolution we are only doing in order to
determine whether the type is a structure or union. We know
nonrepresentable types can't be either, so handle that case and
pass the nonrepresentable type down.
(The added test verifies that the dumper now handles this case and
prints nonrepresentable structure members as it already does
nonrepresentable top-level types, rather than skipping the whole
structure -- or, without the previous commit, skipping the whole types
section.)
ld/ChangeLog
2021-10-25 Nick Alcock <nick.alcock@oracle.com>
* testsuite/ld-ctf/nonrepresentable-member.*: New test.
libctf/ChangeLog
2021-10-25 Nick Alcock <nick.alcock@oracle.com>
* ctf-types.c (ctf_type_rvisit): Handle nonrepresentable types.
Consider the the pcgp-relax-02 testcase,
.text
.globl _start
_start:
.L1: auipc a0, %pcrel_hi(data_a)
.L2: auipc a1, %pcrel_hi(data_b)
addi a0, a0, %pcrel_lo(.L1)
addi a1, a1, %pcrel_lo(.L2)
.data
.word 0x0
.globl data_a
data_a:
.word 0x1
.section .rodata
.globl data_b
data_b:
.word 0x2
If the first auipc is deleted, but we are still building the pcgp
table (connect the high and low pcrel relocations), then there is
an aliasing issue that we need some way to disambiguate which of
the two symbols we are targeting. Therefore, Palmer thought of a
way to use R_RISCV_DELETE to split this into two phases, so we
could resolve the addresses before creating the ambiguities.
This patch just add the ld testcase for the above case, in case we
have changed something but break this.
ld/
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Renamed pcgp-relax
to pcgp-relax-01, and added pcgp-relax-02.
* testsuite/ld-riscv-elf/pcgp-relax-01.d: Renmaed from pcgp-relax.
* testsuite/ld-riscv-elf/pcgp-relax-01.s: Likewise.
* testsuite/ld-riscv-elf/pcgp-relax-02.d: New testcase.
* testsuite/ld-riscv-elf/pcgp-relax-02.s: Likewise.
Commit abd20cb637 and
ebdcad3fdd introduced additional
complexity into the paths run by the RISC-V relaxation pass in order to
resolve the issue of accurately keeping track of pcrel_hi and pcrel_lo
pairs. The first commit split up relaxation of these relocs into a pass
which occurred after other relaxations in order to prevent the situation
where bytes were deleted in between a pcrel_lo/pcrel_hi pair, inhibiting
our ability to find the corresponding pcrel_hi relocation from the
address attached to the pcrel_lo.
Since the relaxation was split into two passes the 'again' parameter
could not be used to perform the entire relaxation process again and so
the second commit added a way to restart ldelf_map_segments, thus
starting the whole process again.
Unfortunately this process could not account for the fact that we were
not finished with the relaxation process so in some cases - such as the
case where code would not fit in a memory region before the
R_RISCV_ALIGN relocation was relaxed - sanity checks in generic code
would fail.
This patch fixes all three of these concerns by reverting back to a
system of having only one target relax pass but updating entries in the
table of pcrel_hi/pcrel_lo relocs every time any bytes are deleted. Thus
we can keep track of the pairs accurately, and we can use the 'again'
parameter to restart the entire target relax pass, behaving in the way
that generic code expects. Unfortunately we must still have an
additional pass to delay deleting AUIPC bytes to avoid ambiguity between
pcrel_hi relocs stored in the table after deletion. This pass can only
be run once so we may potentially miss out on relaxation opportunities
but this is likely to be rare.
https://sourceware.org/bugzilla/show_bug.cgi?id=28410
bfd/
* elfnn-riscv.c (riscv_elf_link_hash_table): Removed restart_relax.
(riscv_elf_link_hash_table_create): Updated.
(riscv_relax_delete_bytes): Moved after the riscv_update_pcgp_relocs.
Update the pcgp_relocs table whenever bytes are deleted.
(riscv_update_pcgp_relocs): Add function to update the section
offset of pcrel_hi and pcrel_lo, and also update the symbol value
of pcrel_hi.
(_bfd_riscv_relax_call): Need to update the pcgp_relocs table
when deleting codes.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Once we've handled an R_RISCV_ALIGN,
we can't relax anything else, so set the sec->sec_flg0 to true.
Besides, we don't need to update the pcgp_relocs table at this
stage, so just pass NULL pointer as the pcgp_relocs table for
riscv_relax_delete_bytes.
(_bfd_riscv_relax_section): Use only one pass for all target
relaxations.
(_bfd_riscv_relax_delete): Likewise, we don't need to update
the pcgp_relocs table at this stage, and don't need to set
the `again' since restart_relax mechanism is abandoned.
(bfd_elfNN_riscv_restart_relax_sections): Removed.
(_bfd_riscv_relax_section): Updated.
* elfxx-riscv.h (bfd_elf32_riscv_restart_relax_sections): Removed.
(bfd_elf64_riscv_restart_relax_sections): Likewise.
ld/
* emultempl/riscvelf.em: Revert restart_relax changes and set
relax_pass to 3.
* testsuite/ld-riscv-elf/align-small-region.d: New testcase.
* testsuite/ld-riscv-elf/align-small-region.ld: Likewise.
* testsuite/ld-riscv-elf/align-small-region.s: Likewise.
* testsuite/ld-riscv-elf/restart-relax.d: Removed sine the
restart_relax mechanism is abandoned.
* testsuite/ld-riscv-elf/restart-relax.s: Likewise.
* testsuite/ld-riscv-elf/ld-riscv-elf.exp: Updated.
ldelf.c: In function 'ldelf_after_open':
ldelf.c:1049:43: warning: the comparison will always evaluate as 'true' for the address of 'elf_header' will never be NULL [-Waddress]
1049 | && elf_tdata (abfd)->elf_header != NULL
| ^~
In file included from ldelf.c:37:
../bfd/elf-bfd.h:1957:21: note: 'elf_header' declared here
1957 | Elf_Internal_Ehdr elf_header[1]; /* Actual data, but ref like ptr */
* ldelf.c (ldelf_after_open): Remove useless elf_header test.
Adjust pr28158.rd for glibc 2.34:
$ readelf -W --dyn-syms tmpdir/pr28158
Symbol table '.dynsym' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.34 (2)
2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (3)
$
vs older glibc:
$ readelf -W --dyn-syms tmpdir/pr28158
Symbol table '.dynsym' contains 4 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 FUNC GLOBAL DEFAULT UND __libc_start_main@GLIBC_2.2.5 (3)
2: 0000000000000000 0 NOTYPE WEAK DEFAULT UND __gmon_start__
3: 000000000040401c 4 OBJECT GLOBAL DEFAULT 23 foo@VERS_2.0 (2)
$
* testsuite/ld-elf/pr28158.rd: Adjusted for glibc 2.34.
My commit 261980de18 added alignment for the resource table symbol.
But it is wrong. The Linux remoteproc driver loads and interprets the
contents of the .resource_table ELF section, not of a table symbol.
Without this patch, if the linker happens to output padding for symbol
alignment, then the resource table contents as viewed by the kernel
loader would "shift" and look corrupted.
ld/ChangeLog:
* scripttempl/pru.sc (.resource_table): Align the output
section, not the first symbol.
Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
--enable-targets=all on a 32-bit host results in a link failure with
undefined references due to elfxx-mips.c not being compiled. This
patch fixes that by putting eelf_mipsel_haiki.c in the correct
EMULATION_SOURCES Makefile variable. I've also added a bunch of
missing file dependencies and sorted a few things so that it's easier
to verify dependencies are present.
* Makfile.am: Add missing haiku dependencies, sort.
(ALL_EMULATION_SOURCES): Sort. Move eelf_mipsel_haiku.c to..
(ALL_64_EMULATION_SOURCES): ..here. Sort.
* Makfile.in: Regenerate.
Don't set version info on unversioned symbols when seeing a hidden
versioned symbol after an unversioned definition and the default
versioned symbol.
bfd/
PR ld/28348
* elflink.c (elf_link_add_object_symbols): Don't set version info
on unversioned symbols.
ld/
PR ld/28348
* testsuite/ld-elf/pr28348.rd: New file.
* testsuite/ld-elf/pr28348.t: Likewise.
* testsuite/ld-elf/pr28348a.c: Likewise.
* testsuite/ld-elf/pr28348b.c: Likewise.
* testsuite/ld-elf/pr28348c.c: Likewise.
* testsuite/ld-elf/shared.exp: Run PR ld/28348 tests.
When statically linking, it can arrive to an undefined weak symbol of
which its value cannot be determined. However, we are having pieces of
code which doesn't take this situation into account, leading to access
a structure which may not be initialized. Fix this situation and add a
test.
bfd/
xxxx-xx-xx Cupertino Miranda <cmiranda@synopsys.com>
Claudiu Zissulescu <claziss@synopsys.com>
* arc-got.h (arc_static_sym_data): New structure.
(get_static_sym_data): New function.
(relocate_fix_got_relocs_for_got_info): Move the computation fo
symbol value and section to above introduced function, and use
this new function.
ld/testsuite/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>
* ld-arc/got-weak.d: New file.
* ld-arc/got-weak.s: Likewise.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
fix
Fixes a few issues:
1) If you use "-fsanitize=address,undefined" in CFLAGS, the Makefile
attempt to trim off -fsanitize options left us with ",undefined".
2) ld_compile adds CFLAGS_FOR_TARGET itself, no need to pass it.
3) CFLAGS might be needed linking bootstrap test.
* Makefile.am (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Trim off
all -fsanitize=*.
* Makefile.in: Regenerate.
* testsuite/ld-bootstrap/bootstrap.exp: Use CFLAGS when linking.
* testsuite/ld-cdtest/cdtest.exp: Use CFLAGS_FOR_TARGET when
linking.
* testsuite/ld-auto-import/auto-import.exp: Don't pass
CFLAGS_FOR_TARGET to ld_compile.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise, and don't allow
nios2 testing to trash CFLAGS_FOR_TARGET.
* testsuite/ld-scripts/crossref.exp: Don't pass options in
CC_FOR_TARGET, do so in CFLAGS_FOR_TARGET instead.
* testsuite/ld-srec/srec.exp: Likewise, and for CXX.
The top level Makefile, the ld Makefile and others, define
CC_FOR_TARGET to be a compiler for the binutils target machine. This
is the compiler that should be used for almost all tests with C
source. There are _FOR_TARGET versions of CFLAGS, CXX, and CXXFLAGS
too. This was all supposed to work with the testsuite .exp files
using CC for the target compiler, and CC_FOR_HOST for the host
compiler, with the makefiles passing CC=$CC_FOR_TARGET and
CC_FOR_HOST=$CC to the runtest invocation.
One exception to the rule of using CC_FOR_TARGET is the native-only ld
bootstrap test, which uses the newly built ld to link a copy of
itself. Since the files being linked were created with the host
compiler, the boostrap test should use CC and CFLAGS, in case some
host compiler option provides needed libraries automatically.
However, bootstrap.exp used CC where it should have used CC_FOR_HOST.
I set about fixing that problem, then decided that playing games in
the makefiles with CC was a bad idea. Not only is it confusing, but
other dejagnu code knows about CC_FOR_TARGET. See dejagnu/target.exp.
So this patch gets rid of the makefile variable renaming and changes
all the .exp files to use the correct _FOR_TARGET variables.
CC_FOR_HOST and CFLAGS_FOR_HOST disappear. A followup patch will
correct bootstrap.exp to use CFLAGS, and a number of other things I
noticed.
binutils/
* testsuite/lib/binutils-common.exp (run_dump_test): Use
CC_FOR_TARGET and CFLAGS_FOR_TARGET rather than CC and CFLAGS.
ld/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET
and similar. Pass variables with unchanged names. Don't set
CC_FOR_HOST or CFLAGS_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
(compiler_supports, plug_opt): Use CC_FOR_TARGET.
* testsuite/ld-cdtest/cdtest.exp: Replace all uses of CC with
CC_FOR_TARGET, and similarly for CFLAGS, CXX and CXXFLAGS.
* testsuite/ld-auto-import/auto-import.exp: Likewise.
* testsuite/ld-cygwin/exe-export.exp: Likewise.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/shared.exp: Likewise.
* testsuite/ld-elfcomm/elfcomm.exp: Likewise.
* testsuite/ld-elfvers/vers.exp: Likewise.
* testsuite/ld-elfvsb/elfvsb.exp: Likewise.
* testsuite/ld-elfweak/elfweak.exp: Likewise.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-mn10300/mn10300.exp: Likewise.
* testsuite/ld-pe/pe-compile.exp: Likewise.
* testsuite/ld-pe/pe-run.exp: Likewise.
* testsuite/ld-pe/pe-run2.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-plugin/plugin.exp: Likewise.
* testsuite/ld-scripts/crossref.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-sh/sh.exp: Likewise.
* testsuite/ld-shared/shared.exp: Likewise.
* testsuite/ld-srec/srec.exp: Likewise.
* testsuite/ld-undefined/undefined.exp: Likewise.
* testsuite/ld-unique/unique.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
libctf/
* Makefile.am (check-DEJAGNU): Don't set CC to CC_FOR_TARGET.
Pass CC and CC_FOR_TARGET. Don't set CC_FOR_HOST.
* Makefile.in: Regenerate.
* testsuite/config/default.exp: Update default CC and similar.
* testsuite/lib/ctf-lib.exp (run_native_host_cmd): Use CC rather
than CC_FOR_HOST.
(run_lookup_test): Use CC_FOR_TARGET and CFLAGS_FOR_TARGET.
--enable-maintainer-mode showed a number of files needing to be
regenerated, and in the case of ld/Makefile.in that the file was
regenerated by hand. Nothing to see here really.
ld/
* Makefile.am (ALL_64_EMULATION_SOURCES): Sort haiku entry.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.
libctf/
* configure: Regenerate.
zlib/
* configure: Regenerate.
It turns out we do need to backtrack when parsing after all. The
fill_opt component in the section rule swiches to EXPRESSION and back
to SCRIPT, and to find the end of an expression it is necessary to
look ahead one token.
* ldgram.y (section): Throw away lookahead NAME token.
(overlay_section): Likewise.
* testsuite/ld-elf/overlay.t: Add fill pattern on overlays.
Test fill pattern before stupidly named normal sections too,
and before /DISCARD/.
This tidies the states in which ld lexer rules are enabled.
This change will quite likely trip over issues similar to those
mentioned in the new ldlex.l comments, so please test it out.
* ldgram.y (wildcard_name): Remove now unnecessary components.
* ldlex.l: Restrict many rules' states. Remove -l expression
state rule. Comment on lookahead state madness and need for
/DISCARD/ in expression state.
I think these happened by accident, so let's see what breaks if they
are removed.
* ldlex.l: Remove lower case "absolute" and "sizeof_headers"
in non-mri mode.
* ld.texi: Remove sizeof_headers index.
* testsuite/ld-mmix/mmohdr1.ld: Use SIZEOF_HEADERS.
MRI mode generally doesn't flip lexer states, so let's make MRI mode
"extern" not do so either.
* ldgram.y (extern_name_list): Don't change lex state here.
(ifile_p1): Change state here on EXTERN instead.
I discovered some more errors when tightening up the lexer rules.
Just because we INCLUDE a file doesn't mean we've switched states.
PR 28217
* ldgram.y (statement): Don't switch lexer state on INCLUDE.
(mri_script_command, ifile_p1, memory_spec, section): Likewise.
The saga of commit 40726f16a8 continues. This attacks the problem
of switching between SCRIPT and EXPRESSION state lexing by removing
the need to do so for phdrs like ":text". Instead {WILDCHAR}*
matching, the reason why ":text" lexed as one token, is restricted to
within the braces of a section or overlay statement. The new WILD
lexer state is switched at the non-optional brace tokens, so
ldlex_backup is no longer needed. I've also removed the BOTH state,
which doesn't seem to be needed any more. Besides rules involving
error reporting, there was just one place where SCRIPT appeared
without BOTH, the {WILDCHAR}* rule, three where BOTH appears without
SCRIPT for tokens that only need EXPRESSION state, and two where BOTH
appears alongside INPUT_LIST. (Since I'm editing the wild and
filename rules, removing BOTH and adding WILD can also be seen as
renaming the old BOTH state to SCRIPT and renaming the old SCRIPT
state to WILD with a reduced scope.)
As a followup, I'll look at removing EXPRESSION state from some lexer
rules that no longer need it due to this cleanup.
PR 28217
* ldgram.y (exp <ORIGIN, LENGTH>): Use paren_script_name.
(section): Parse within braces of section in wild mode, and
after brace back in script mode. Remove ldlex_backup call.
Similarly for OVERLAY.
(overlay_section): Similarly.
(script_file): Replace ldlex_both with ldlex_script.
* ldlex.h (ldlex_wild): Declare.
(ldlex_both): Delete.
* ldlex.l (BOTH): Delete. Remove state from all rules.
(WILD): New state. Enable many tokens in this state.
Enable filename match in SCRIPT mode. Enable WILDCHAR match
in WILD state, disable in SCRIPT mode.
(ldlex_wild): New function.
* ldfile.c (ldfile_try_open_bfd): Replace ldlex_both call with
ldlex_script.
Since ns32k-netbsd is as yet not removed, just marked obsolete,
the target should still be accepted with --enable-obsolete.
I also enabled ns32k-openbsd in ld since there doesn't seem to be a
good reason why that target is not supported there but is elsewhere.
bfd/
* config.bfd: Allow ns32k-netbsd.
ld/
* configure.tgt: Allow ns32k-openbsd.
As discussed previously, a.out support is now quite deprecated, and in
some cases removed, in both Binutils itself and NetBSD, so this legacy
default makes little sense. `netbsdelf*` and `netbsdaout*` still work
allowing the user to be explicit about there choice. Additionally, the
configure script warns about the change as Nick Clifton requested.
One possible concern was the status of NetBSD on NS32K, where only a.out
was supported. But per [1] NetBSD has removed support, and if it were to
come back, it would be with ELF. The binutils implementation is
therefore marked obsolete, per the instructions in the last message.
With that patch and this one applied, I have confirmed the following:
--target=i686-unknown-netbsd
--target=i686-unknown-netbsdelf
builds completely
--target=i686-unknown-netbsdaout
properly fails because target is deprecated.
--target=vax-unknown-netbsdaout builds completely except for gas, where
the target is deprecated.
[1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html
---
bfd/config.bfd | 43 +++++++++++++--------
bfd/configure.ac | 5 +--
binutils/testsuite/binutils-all/nm.exp | 2 +-
binutils/testsuite/lib/binutils-common.exp | 7 +---
config/picflag.m4 | 4 +-
gas/configure.tgt | 9 +++--
gas/testsuite/gas/arm/blx-bl-convert.d | 2 +-
gas/testsuite/gas/arm/blx-local-thumb.d | 2 +-
gas/testsuite/gas/sh/basic.exp | 2 +-
gdb/configure.host | 34 +++++++----------
gdb/configure.tgt | 2 +-
gdb/testsuite/gdb.asm/asm-source.exp | 6 +--
intl/configure | 2 +-
ld/configure.tgt | 44 +++++++++++-----------
ld/testsuite/ld-arm/arm-elf.exp | 4 +-
ld/testsuite/ld-elf/elf.exp | 2 +-
ld/testsuite/ld-elf/shared.exp | 4 +-
libiberty/configure | 4 +-
