Using e.g.
.arch_extension simd
.arch_extension nocrypto
so far results in SIMD support getting disabled, which I can't see being
the purpose of the "no"-prefixed variants of architecture extension
specifications.
Of course it is questionable whether the current, counter intuitive
behavior needs to be retained, and the new behavior perhaps be made work
through e.g. a newly recognized "no-" prefix.
gas/
2015-01-07 Jan Beulich <jbeulich@suse.com>
* gas/config/tc-arm.c (struct arm_option_extension_value_table):
Split field "value" into fields "merge_value" and "clear_value".
(arm_extensions): Adjust initializer accordingly.
PR binutils/17512
* reloc.c (bfd_get_reloc_size): Handle a reloc size of -1.
(bfd_perform_relocation): Include the size of the reloc in the
test for an out of range relocation.
(bfd_generic_get_relocated_section_contents): Remove reloc range
test.
PR binutils/17512
* coffdump.c (dump_coff_section): Check for a symbol being
available before printing its name.
(main): Check the return value from coff_grok.
* coffgrok.c: Reformat and tidy.
Add range checks to most functions.
(coff_grok): Return NULL if the input bfd is not in a COFF
format.
* coffgrok.h: Reformat and tidy.
(struct coff_section): Change the nrelocs field to unsigned.
* srconv.c (main): Check the return value from coff_grok.
* coff-i860.c (CALC_ADDEND): Always set an addend value.
* tekhex.c (getvalue): Add an end pointer parameter. Use it to
avoid reading off the end of the buffer.
(getsym): Likewise.
(first_phase): Likewise.
(pass_over): Pass an end pointer to the invoked function.
This fixes a similar error as in the Python support code where
trying to create an empty array.
In guile/scm-type.c::tyscm_array_1, the funtion raises an exception
if N2 < N1:
if (n2 < n1)
{
gdbscm_out_of_range_error (func_name, SCM_ARG3,
But it should be doing so if N2 == N1 - 1, since that would simply
be an empty array, not an array with a negative length.
gdb/ChangeLog:
* guile/scm-type.c (tyscm_array_1): Do not raise out-of-range
error if N2 is equal to N1 - 1.
The following python command fails:
(gdb) python print gdb.lookup_type('char').array(1, 0)
Traceback (most recent call last):
File "<string>", line 1, in <module>
ValueError: Array length must not be negative
Error while executing Python code.
The above is trying to create an empty array, which is fairly command
in Ada.
gdb/ChangeLog:
* python/py-type.c (typy_array_1): Do not raise negative-length
exception if N2 is equal to N1 - 1.
gdb/testsuite/ChangeLog:
* gdb.python/py-type.exp: Add a couple test about empty
array creation, and negative-length array creation.
PR binutils/17512
* nm.c (print_symbol): Add 'is_synthetic' parameter. Use it to
help initialize the info.elfinfo field.
(print_size_symbols): Add 'synth_count' parameter. Use it to set
the is_synthetic parameter when calling print_symbol.
(print_symbols): Likewise.
(display_rel_file): Pass synth_count to printing function.
(display_archive): Break loop if the last archive displayed
matches the current archive.
* size.c (display_archive): Likewise.
* archive.c (do_slurp_bsd_armap): Make sure that the parsed sized
is at least big enough for the header to be read.
* elf32-i386.c (elf_i386_get_plt_sym_val): Skip unknown relocs.
* mach-o.c (bfd_mach_o_get_synthetic_symtab): Add range checks.
(bfd_mach_o_read_command): Prevetn duplicate error messages about
unrecognized commands.
* syms.c (_bfd_stab_section_find_nearest_line): Add range checks
when indexing into the string table.
PR binutils/17531
* dwarf.c (alloc_num_debug_info_entries): New variable.
(process_debug_info): Set it. Use it to avoid displaying
attributes for which there is no info.
(display_debug_abbrev): Check that the debug_info_entry index is
valid before using it.
(display_loc_list_dwo): Likewise.
(process_cu_tu_index): Add range check for an overlarge dw_sect
value.
(free_debug_memory): Reset alloc_num_debug_info_entries.
* readelf.c (slurp_ia64_unwind_table): Warn if the reloc could not
be indentified.
(dynamic_section_mips_val): Warn if the timestamp is invalid.
(print_mips_got_entry): Add a data_end parameter. Warn if a read
would go beyond the end of the data, and return an error value.
(process_mips_specific): Do not read options from beyond the end
of the section.
Correct code to display optional data at the end of an option.
Warn if there are too many GOT symbols.
Update calls to print_mips_got_entry, and handle error returns.
Make the extracted stack offset signed in the standard MIPS prologue
scanner, to simplify handling and make sure register offsets are correct
in all cases, especially where $fp equals the virtual frame pointer (old
GCC frames) and therefore offsets to save slots are negative.
* mips-tdep.c (mips32_scan_prologue): Make the extracted stack
offset signed.
This patch renames gdb/'s ChangeLog to ChangeLog-2014 and creates
a new one for 2015. config/djgpp/fnchange.lst is updated accordingly.
gdb/ChangeLog:
* config/djgpp/fnchange.lst: Add entry for gdb/ChangeLog-2014.
This patch removes documentation from some commands whose support has
been recently removed.
gdb/ChangeLog:
* NEWS: Document removal of "dll-symbols", "add-shared-symbol-files"
and "assf" commands.
gdb/doc/ChangeLog:
* gdb.texinfo (Files): Remove documentation of the
"add-shared-symbol-files" and "assf" commands.
(Cygwin Native): Remove documentation of the "dll-symbols"
command.
bfd/
PR ld/17773
* elflink.c (bfd_elf_final_link): Assign the file position for
the symbol string table only there are symbols to be emitted.
ld/testsuite/
PR ld/17773
* ld-elf/binutils.exp (binutils_test): Add an optional
readelf_options. Replace -l with $readelf_options. Add a
gap test.
* ld/testsuite/ld-elf/gap.s: New file.
* complete.c (stat_char) [_WIN32]: Don't use 'access' and X_OK on
Windows, they don't work. Instead, look at the file-name
extension to determine whether the file is executable.
This patch removes a set of commands that have been deprecated for
a while, and which we agreed to remove after the GDB 7.8 release.
gdb/ChangeLog:
* windows-nat.c (safe_symbol_file_add_stub)
(safe_symbol_file_add_cleanup, safe_symbol_file_add)
(dll_symbol_command): Delete.
(_initialize_windows_nat): Delete local variable "c".
Remove "dll-symbols", "add-shared-symbol-files" and assf"
commands.
Tested by rebuilding GDB on x86-windows.
Hi,
This patch is a follow-up of the following discussions:
<https://sourceware.org/ml/gdb-patches/2014-12/msg00421.html>
<https://gcc.gnu.org/ml/gcc-patches/2014-12/msg01293.html>
input_interrupt is currently emiting non-printable characters, which
is confusing the dg-extract-results.sh script. This is obviously not
a good thing, and, by following Pedro's advices here:
<https://gcc.gnu.org/ml/gcc-patches/2014-12/msg01320.html>
I adapted the function to print "client connection closed" when it
receives a NUL character, or use the "isprint" function to decide how
to print the received char. I tested it by running the testcases that
were printing the non-printable chars before:
gdb.base/gdb-sigterm.exp
gdb.threads/non-ldr-exc-1.exp
gdb.threads/non-ldr-exc-2.exp
gdb.threads/non-ldr-exc-3.exp
gdb.threads/non-ldr-exc-4.exp
gdb.threads/thread-execl.exp
and confirming that they print the right message. I tried a bit to
come up with a testcase for this, but failed, and since I did not want
to spend too much time on it, I'm sending the patch anyway.
Comments are welcome, as usual.
gdb/gdbserver/ChangeLog:
2014-12-29 Sergio Durigan Junior <sergiodj@redhat.com>
* remote-utils.c: Include ctype.h.
(input_interrupt): Explicitly handle the case when the char
received is the NUL byte. Improve the printing of non-ASCII
characters.
2014-12-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/
* arm-tdep.c (arm_gdbarch_init): Remove casts in Tag_ABI_VFP_args
switch case statements.
This patch is to clean up gdb.trace/entry-values.exp as a preparation
of the next patch. It updates the comments to reflect the code.
One DIE generated in dwarf assembler is
GNU_call_site {
{low_pc "$bar_start + $bar_call_foo" addr}
{abstract_origin :$foo_label}
the DW_AT_low_pc attribute is the return address after the call, so I
rename variable bar_call_foo to returned_from_foo.
gdb/testsuite:
2014-12-29 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Update comments. Rename variable
bar_call_foo to returned_from_foo.
Factor out strlen to give better code and less likelihood of a repeat
of this problem.
PR 17766
* pei-x86_64.c (pex64_bfd_print_pdata_section): Correct string
length. Use memcpy rather than strcpy.
