* dwarf.c (get_type_abbrev_from_form): Accept but ignore sup
forms.
(read_and_display_attr_value): Handle sup forms.
(display_debug_sup): New function. Displays the contents of a
.debug_sup section.
(load_debug_sup_file): New function. Loads the contents of a file
referenced by a .debug_sup section.
(check_for_and_load_links): Call load_debug_sup_file.
(debug_displays): Add entry for .debug_sup.
* dwarf.h (enum dwarf_section_display_enum): Add debug_sup.
* readelf.c (process_section_headers): Add support for debug_sup.
* doc/debug.options.texi: Note that the =links option will display
the contents of .debug_sup sections.
* NEWS: Mention the new support.
This patch makes use of the temp file descriptor in smart_rename
rather than reopening the file. I don't believe there is a security
issue in reopening the file, but this way is one less directory
operation. The patch also attempts to preserve S_ISUID and S_ISGID.
PR 27456
* bucomm.h (smart_rename): Update prototype.
* rename.c (smart_rename): Add fromfd and preserve_dates params.
Pass fromfd and target_stat to simple_copy. Call set_times
when preserve_dates.
(simple_copy): Accept fromfd rather than from filename. Add
target_stat param. Rewind fromfd rather than opening. Open
"to" file without O_CREAT. Try to preserve S_ISUID and S_ISGID.
* ar.c (write_archive): Rename ofd to tmpfd. Dup tmpfd before
closing output temp file, and pass tmpfd to smart_rename.
* arsup.c (temp_fd): Rename from real_fd.
(ar_save): Dup temp_fd and pass to smart_rename.
* objcopy.c (strip_main, copy_main): Likewise, and pass
preserve_dates.
* testsuite/lib/binutils-common.exp: Whitespace fixes throughout.
(run_dump_test): Fail if expecting errors from a file like we do
for error strings, if no error is seen.
I forgot that .sleb128 handles bignums, so this test should run fine
for 32-bit targets on 32-bit hosts.
* testsuite/binutils-all/readelf.exp (pr26548): Run for 32-bit too.
Renaming over existing files needs additional care to restore
permissions and ownership, which may not always succeed.
Additionally, other properties of the file such as extended attributes
may be lost, making the operation flaky.
For predictable results, resort to rename() only if the file does not
exist, otherwise copy the file contents into the existing file. This
ensures that no additional tricks are needed to retain file
properties.
This also allows dropping of the redundant set_times on the tmpfile in
objcopy/strip since now we no longer rename over existing files.
binutils/
* ar.c (write_archive): Remove TARGET_STAT. Adjust call to
SMART_RENAME.
* arsup.c (ar_save): Likewise.
* objcopy (strip_main): Don't copy TMPFD. Don't set times on
temporary file and adjust call to SMART_RENAME.
(copy_main): Likewise.
* rename.c [!S_ISLNK]: Remove definitions.
(try_preserve_permissions): Remove function.
(smart_rename): Remove FD, PRESERVE_DATES arguments. Use
rename system call only if TO does not exist.
* bucomm.h (smart_rename): Adjust declaration.
There is a tiny error left in dwarf.c:read_leb128 after Nick fixed the
signed overflow problem in code I wrote. It's to do with sleb128
values that have unnecessary excess bytes. For example, -1 is
represented as 0x7f, the most efficient encoding, but also as
0xff,0x7f or 0xff,0xff,0x7f and so on. None of these sequences
overflow any size signed value, but read_leb128 will report an
overflow given enough excess bytes. This patch fixes that problem,
and since the proper test for signed values with excess bytes can
easily be adapted to also test a sleb byte with just some bits that
overflow the result, I changed the code to not use signed right
shifts. (The C standard ISO/IEC 9899:1999 6.5.7 says signed right
shifts of negative values have an implementation defined value. A
long time ago I even used a C compiler for a certain microprocessor
that always did unsigned right shifts. Mind you, it is very unlikely
to be compiling binutils with such a compiler.)
bfd/
* wasm-module.c: Guard include of limits.h.
(CHAR_BIT): Provide backup define.
(wasm_read_leb128): Use CHAR_BIT to size "result" in bits.
Correct signed overflow checking.
opcodes/
* wasm32-dis.c: Include limits.h.
(CHAR_BIT): Provide backup define.
(wasm_read_leb128): Use CHAR_BIT to size "result" in bits.
Correct signed overflow checking.
binutils/
* dwarf.c: Include limits.h.
(CHAR_BIT): Provide backup define.
(read_leb128): Use CHAR_BIT to size "result" in bits. Correct
signed overflow checking.
* testsuite/binutils-all/pr26548.s,
* testsuite/binutils-all/pr26548.d,
* testsuite/binutils-all/pr26548e.d: New tests.
* testsuite/binutils-all/readelf.exp: Run them.
(readelf_test): Drop unused "xfails" parameter. Update all uses.
* objdump.c (load_specific_debug_section): Don't call
bfd_cache_section_contents. Rearrange so that
bfd_get_full_section_contents is not called on path where
bfd_simple_get_relocated_section_contents is called.
Don't set section->user_data.
(free_debug_section): Always free section->start. Don't twiddle
section flags.
* readelf.c (load_specific_debug_section): Don't set user_data.
* dwarf.h (struct dwarf_section): Remove use_data field.
* dwarf.c (NO_ABBREVS, ABBREV): Adjust to suit.
nds32_elf_get_relocated_section_contents uses nds32_get_section_contents
to read sections contents, but nds32_get_section_contents has the wrong
behaviour as it calls bfd_malloc_and_get_section. That function always
mallocs its output buffer, whereas get_relocated_section_contents must
support an already allocated buffer.
bfd/
* elf32-nds32.c (nds32_get_section_contents): Replace
bfd_malloc_and_get_section with bfd_get_full_section_contents.
(nds32_elf_relax_delete_blanks): Init contents.
(nds32_elf_relax_section, nds32_relax_fp_as_gp): Likewise.
binutils/
* testsuite/binutils-all/compress.exp: Remove nds32 xfails.
* testsuite/binutils-all/objdump.exp: Likewise.
Space for a NULL is there in every backend bfd_get_symtab_upper_bound
or bfd_get_dynamic_symtab_upper_bound when the symbol count is non-zero,
and placed as a terminator by bfd_canonicalize_symtab. Many backends
even return a single NULL entry array for zero symbol count, and while
there are a few that return a NULL array for no symbols, that case is
handled fine in objdump. So don't have objdump add yet another NULL
entry.
* objdump.c (slurp_symtab): Don't add an extra entry for NULL
to the symbol array.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): Formatting. Copy terminating NULL from extra_syms.
Any code using AC_DEBUGINFOD from this dir is using -I../config when
running aclocal, so an explicit include on pkg.m4 is unnecessary:
aclocal will find the pkg.m4 in this dir just as easily. This is
seen in the only two dirs that use AC_DEBUGINFOD (binutils & gdb)
as their aclocal.m4 already has m4_include on config m4 files.
The include as written only works if aclocal is run on a dir that is
at the same level of config/. Any other depth will fail.
./
|-- config/
|-- binutils/ # works
|-- gdb/ # works
`-- sim/ # works
`-- <port>/ # fails
It fails even if AC_DEBUGINFOD itself isn't used:
sim/bfin/ $ aclocal -I../../config
aclocal-1.15: error: ../../config/debuginfod.m4:8: file '../config/pkg.m4' does not exist
* configure.ac (follow-debug-links): Add option to enable or
disable the following of debug links by default. Set the
default for the option to be 'follow'.
* dwarf.c (do_follow_links): Initialise with DEFAULT_FOR_FOLLOW_LINKS.
(dwarf_select_sections_by_names): Add no-follow-links option.
(dwarf_select_sections_by_letter): Add 'N' option.
* objdump.c (usage): Add conditional text describing the
follow links option.
(slurp_symtab): Ensure that there is a NULL entry at the end
of the symbol table.
(slurp_dynamic_symtab): Likewise.
(dump_bfd): When extending the symbol table, ensure that there
is still a NULL entry at the end.
* readelf.c (usage): Add conditional text describing the
follow links option.
* doc/binutils.texi: Update documentation for objcopy and
readelf.
* doc/debug.options.texi: Update documentation of the
follow-links option.
* config.in: Regenerate.
* configure: Regenerate.
* testsuite/binutils-all/compress.exp: Add the -WN option to
objdump command lines that are not expecting to follow links.
* testsuite/binutils-all/readelf.exp: Add the
--debug-dump=no-follow-links option to tests that are not
expecting to follow debug links.
gas * testsuite/gas/mach-o/sections-1.d: Stop automatic debug link
following.
* testsuite/gas/xgate/insns-dwarf2.d: Likewise.
ld * testsuite/ld-elf/sec64k.exp: Stop readelf from automatically
following debug links.
You'd think "unresolved" would be correct for an objcopy test when the
assembler refuses to assemble one of our source files. After all, the
test of objcopy hasn't been run. However, "unresolved" results in
runtest returning with an error status. If instead we report
"unsupported", runtest returns success. Which is a little less
confusing to a user who doesn't see any errors reported unless they
look in log files.
* testsuite/binutils-all/objcopy.exp: Report "unsupported" when
gas or ld fails to build a testcase rather than "unresolved".
Report "fail" when readelf returns an error status rather than
"unresolved".
* testsuite/binutils-all/ar.exp: Likewise.
* testsuite/binutils-all/compress.exp: Likewise.
* testsuite/binutils-all/readelf.exp: Likewise.
This fixes the test for z80, which predefine register symbols "a" and
"c" among others.
* testsuite/binutils-all/pr25662.s: Replace "a" with "aaa" and
"c" with "ccc" labels.
With exec:
...
$ clang -gdwarf-5 ./src/gdb/testsuite/gdb.dwarf2/fission-mix*.c
...
we have:
...
$ readelf -w a.out
...
Contents of the .debug_str_offsets section:
Length: 0x24
Version: 0x5
Index Offset [String]
0 1d0 clang version 10.0.1
1 1e6 src/gdb/testsuite/gdb.dwarf2/fission-mix-2.c
2 213 /home/vries/gdb_versions/devel
3 232 bar
4 236 x
5 61 int
6 238 s
7 23a func2
8 2c ild/BUILD/glibc-2.26/csu
9 5 sdeps/x86_64/start.S
10 1d0 clang version 10.0.1
11 240 src/gdb/testsuite/gdb.dwarf2/fission-mix.c
12 213 /home/vries/gdb_versions/devel
13 26b foo
14 236 x
15 61 int
16 238 s
17 26f func
18 274 main
19 279 arg
...
The section consists of two parts, one for each CU, each with a header, but
the printing only reads the first header as a header, and prints the second
header as:
...
8 2c ild/BUILD/glibc-2.26/csu
9 5 sdeps/x86_64/start.S
...
Fix this in display_debug_str_offsets such that we have:
...
6 238 s
7 23a func2
Length: 0x2c
Version: 0x5
Index Offset [String]
0 1d0 clang version 10.0.1
1 240 src/gdb/testsuite/gdb.dwarf2/fission-mix.c
...
binutils/ChangeLog:
2021-02-12 Tom de Vries <tdevries@suse.de>
* dwarf.c (display_debug_str_offsets): Handle multiple sets of
entries.
With exec:
...
$ gcc -gsplit-dwarf ~/hello.c -gdwarf-5
...
a dwarf-5 DW_UT_skeleton CU is generated, but the corresponding DWO ID is not
printed by readelf -wi.
Add this, such that we have:
....
Compilation Unit @ offset 0xc7:
Length: 0x31 (32-bit)
Version: 5
Unit Type: DW_UT_skeleton (4)
Abbrev Offset: 0x64
Pointer Size: 8
+ DWO ID: 0x4756ae3ac4348f21
<0><db>: Abbrev Number: 1 (DW_TAG_skeleton_unit)
...
binutils/ChangeLog:
2021-02-12 Tom de Vries <tdevries@suse.de>
* dwarf.c (process_debug_info): Print DWO ID.
With an exec:
...
$ pwd
/home/vries/tmp
$ gcc /home/vries/tmp/src/hello.c -gsplit-dwarf -c \
-o /home/vries/tmp/obj/hello.o
...
I get:
...
$ readelf -w obj/hello.o > READELF
readelf: Warning: Unable to load dwo file: \
/home/vries/tmp//home/vries/tmp/obj/hello.dwo
...
The dwo file name is listed here:
...
<20> DW_AT_GNU_dwo_name: /home/vries/tmp/obj/hello.dwo
<24> DW_AT_comp_dir : /home/vries/tmp
...
The standard states about the DW_AT_dwo_name attribute:
...
value is a null-terminated string containing the full or relative path name
(relative to the value of the DW_AT_comp_dir attribute, see below) of the
object file that contains the full compilation unit.
...
So, readelf shouldn't try to prefix an absolute path with DW_AT_comp_dir.
Fix this in load_dwo_file by handling the absolute path case.
binutils/ChangeLog:
2021-02-10 Tom de Vries <tdevries@suse.de>
PR binutils/27391
* dwarf.c (load_dwo_file): Handle case that name is absolute path.
With exec:
...
$ g++ src/gdb/testsuite/gdb.cp/cpexprs.cc -gdwarf-5 -fdebug-types-section
...
I run into:
...
$ readelf -w a.out > READELF
readelf: Error: Invalid range list entry type 126
readelf: Error: Invalid range list entry type 60
...
The executable contains both a .debug_rnglists section (for CU
cpexprs.cc) and a .debug_ranges section (for other CUs, like crti.S). But
when executing display_debug_ranges for say, section .debug_rnglists it also
tries to use the range list references related to section .debug_ranges.
Fix this by filtering out the .debug_range references when handling
.debug_rnglists and vice versa.
binutils/ChangeLog:
2021-02-10 Tom de Vries <tdevries@suse.de>
PR binutils/27371
* dwarf.c (display_debug_ranges): Filter range lists according to
section.
When compiling an exec like this:
...
$ gcc -fdebug-types-section hello.c -gdwarf-5
...
we run into:
...
$ readelf -w a.out > READELF
readelf: Warning: Unexpected form 20 encountered whilst finding \
abbreviation for type
...
Fix this by handling DW_FORM_ref_sig8 conservatively in
get_type_abbrev_from_form.
binutils/ChangeLog:
2021-02-09 Tom de Vries <tdevries@suse.de>
PR binutils/27370
* dwarf.c (get_type_abbrev_from_form): Handle DW_FORM_ref_sig8.
With this exec:
...
$ gcc -gsplit-dwarf hello.c -gdwarf-5
...
we run into:
...
$ readelf -w a.out > READELF
readelf: Warning: CU at offset c7 contains corrupt or unsupported unit type: 4.
readelf: Warning: CU at offset c7 contains corrupt or unsupported unit type: 4.
...
Fix this by handling DW_UT_skeleton and DW_UT_split_compile in
process_debug_info.
Note that this just adds the parsing of DWO_id, but not yet any printing of
it.
Tested on x86_64-linux.
binutils/ChangeLog:
2021-02-09 Tom de Vries <tdevries@suse.de>
PR binutils/27386
* dwarf.c (process_debug_info): Handling DW_UT_skeleton and
DW_UT_split_compile.
Printing "invalid" is better than printing an uninitialised buffer
and occasionally running off the end of the buffer.
* unwind-ia64.c (unw_print_xyreg): Don't leave output buffer
uninitialised on invalid input.
PR 27270
PR 27284
PR 26945
* ar.c: Don't include libbfd.h.
(write_archive): Replace xmalloc+strcpy with xstrdup. Use
bfd_stat rather than fstat on iostream. Move stat and fd tests
outside of _WIN32 ifdef. Delete skip_stat variable.
* arsup.c (temp_name, real_ofd): New static variables.
(ar_open): Use make_tempname and bfd_fdopenw.
(ar_save): Adjust to suit ar_open changes. Move stat output
of _WIN32 ifdef.
* objcopy.c: Don't include libbfd.h.
(copy_file): Use bfd_stat.
Add "R (retain)" and "D (mbind)" to "Key to Flags:".
PR binutils/27281
* readelf.c (process_section_headers): Add 'R' and 'D' to
"Key to Flags:".
* testsuite/binutils-all/retain1a.d: Updated.
So that no one need worry about the value of Z_OK.
bfd/
* compress.c (decompress_contents): Tidy inflateEnd result test.
binutils/
* readelf.c (uncompress_section_contents): Tidy inflateEnd result test.
