Commit Graph

560 Commits

Author SHA1 Message Date
H.J. Lu
59a1e29d9e X32: Place .plt.got section after .plt section
This patch places .plt.got section after .plt section for x32.

	* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): New.
	* testsuite/ld-x86-64/pr20830.d: Renamed to ...
	* testsuite/ld-x86-64/pr20830a.d: This.  Updated.
	* testsuite/ld-x86-64/pr20830b.d: New file.
	* testsuite/ld-x86-64/x86-64.exp: Rename pr20830 to pr20830a.
	Run pr20830b.
2017-01-10 13:57:39 -08:00
Graham Markall
07ccf83cf5 [ARC] Add new linker emulation for nps
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.

This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.

The accompanying test ensures that all symbols are provided at the
correct address in the linker script.

ld/ChangeLog:

  * Makefile.am: Add earclinux_nps.c target and add to
  ALL_EMULATION_SOURCES.
  * Makefile.in: Likewise, regenerated.
  * configure.tgt: Add arclinux_nps as an extra emulation for
  arc*-*-elf* and arc*-*-linux*.
  * emulparams/arc-nps.sh: New file.
  * emulparams/arclinux_nps.sh: New file.
  * testsuite/ld-arc/arclinux-nps.d,
  * testsuite/ld-arc/arclinux-nps.s: New test.
2017-01-10 10:55:13 +00:00
Palmer Dabbelt
6ec11ab97a Remove some custom sections from RISC-V's default linker scripts
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS.  This is a bad idea.  The fix is
to just remove this micro-optimization.

Thanks to Alan Morda for finding the problem!

ld/ChangeLog

2017-01-09  Palmer Dabbelt <palmer@dabbelt.com>
            Kito Cheng <kito.cheng@gmail.com>

        * emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
        Removed.
        (SDATA_START_SYMBOLS): Likewise.
2017-01-09 09:12:20 -08:00
Alan Modra
64859e1487 Support -z relro on metag
* emulparams/elf32metag.sh (COMMONPAGESIZE): Define.
2017-01-02 22:44:29 +10:30
Alan Modra
f5657270bd Support -z relro on hppa
PR ld/21000
	* emulparams/hppalinux.sh (DATA_ADDR, SHLIB_DATA_ADDR): Don't define.
	(DATA_SEGMENT_ALIGN, DATA_SEGMENT_END, DATA_SEGMENT_RELRO_END): Define.
	* scripttempl/elf.sc: Don't define the above if DATA_SEGMENT_ALIGN
	is already defined.
2017-01-02 22:42:45 +10:30
Alan Modra
2571583aed Update year range in copyright notice of all files. 2017-01-02 14:08:56 +10:30
Dimitar Dimitrov
0220170b4d PRU LD Port
* NEWS: Mention new PRU target.
	* Makefile.am: Add PRU target.
	* configure.tgt: Ditto.
	* emulparams/pruelf.sh: New file.
	* emultempl/pruelf.em: New file.
	* scripttempl/pru.sc: New file.
	* Makefile.in: Regenerate.
	* testsuite/ld-pru/emit-relocs-1.d: New PRU testcase file.
	* testsuite/ld-pru/emit-relocs-1.ld: Ditto.
	* testsuite/ld-pru/emit-relocs-1a.s: Ditto.
	* testsuite/ld-pru/emit-relocs-1b.s
	* testsuite/ld-pru/ldi32.d: Ditto.
	* testsuite/ld-pru/ldi32.s: Ditto.
	* testsuite/ld-pru/ldi32_symbol.s: Ditto.
	* testsuite/ld-pru/norelax_ldi32-data.d: Ditto.
	* testsuite/ld-pru/norelax_ldi32-dis.d: Ditto.
	* testsuite/ld-pru/pcrel_s10.d: Ditto.
	* testsuite/ld-pru/pcrel_s10.s: Ditto.
	* testsuite/ld-pru/pcrel_s10_label.s: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal.d: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal.s: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal2.d: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal2.s: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal3.d: Ditto.
	* testsuite/ld-pru/pcrel_u8-illegal3.s: Ditto.
	* testsuite/ld-pru/pcrel_u8.d: Ditto.
	* testsuite/ld-pru/pcrel_u8.s: Ditto.
	* testsuite/ld-pru/pcrel_u8_label.s: Ditto.
	* testsuite/ld-pru/pmem.d: Ditto.
	* testsuite/ld-pru/pmem.s: Ditto.
	* testsuite/ld-pru/pmem_symbol.s: Ditto.
	* testsuite/ld-pru/pru.exp: Ditto.
	* testsuite/ld-pru/relax_ldi32-data.d: Ditto.
	* testsuite/ld-pru/relax_ldi32-dis.d: Ditto.
	* testsuite/ld-pru/relax_ldi32.s: Ditto.
	* testsuite/ld-pru/relax_ldi32_symbol.s: Ditto.
	* testsuite/ld-pru/reloc.d: Ditto.
	* testsuite/ld-pru/reloc.s: Ditto.
	* testsuite/ld-pru/reloc_symbol.s: Ditto.
	* testsuite/ld-pru/u16.d: Ditto.
	* testsuite/ld-pru/u16.s: Ditto.
	* testsuite/ld-pru/u16_symbol.s: Ditto.

PRU does not export __end symbol because it is ambiguous for it.
Users are expected to use instead the section markers __text_end,
__data_end, __bss_end or __noinit_end.

	* testsuite/lib/ld-lib.exp (check_shared_lib_support): No shared
	libraries are supported for PRU.
	(check_gc_sections_available): Mark PRU as not supported.
	* testsuite/ld-elf/eh-frame-hdr.d: Disable for PRU.
	* testsuite/ld-elf/endsym.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Likewise.
	* testsuite/ld-elf/sec-to-seg.exp: Likewise.
	* testsuite/ld-elf/sec64k.exp: Mark sec64k case as too big for PRU.
	* testsuite/ld-srec/srec.exp (run_srec_test): Add setup for PRU.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>
2016-12-31 12:04:11 +10:30
Josh Conner
d5451cd453 Add support for Fushia OS.
* configure.ac: Add fuchsia to targets that use ELF.
        * configure: Regenerated.

bfd     * configure.tgt: Add support for fuchsia (OS).

gas     * configure.tgt: Add support for fuchsia (OS).

ld      * Makefile.am: Add dependency information for earmelf_fuchsia.c.
        * Makefile.in: Regenerate.
        * configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and
        x86_64-*-fuchsia* targets.
        * emulparams/armelf_fuchsia.sh: New file.
        * emulparams/armelfb_fuchsia.sh: New file.
2016-12-02 10:44:29 +00:00
Andrew Burgess
268ebe9520 arc/ld: Remove duplicate TEMPLATE_NAME from emulparam file
Remove duplicate definition of TEMPLATE_NAME, only the last of these
will have any effect, so this should result in no visible changes to the
user.

ld/ChangeLog:

	* emulparams/arclinux_prof.sh: Remove duplicate TEMPLATE_NAME.
2016-11-28 22:30:17 +00:00
Nick Clifton
e23eba971d Add support for RISC-V architecture.
bfd	* Makefile.am: Add entries for riscv32-elf and riscv64-elf.
	* config.bdf: Likewise.
	* configure.ac: Likewise.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* archures.c: Add bfd_riscv_arch.
	* reloc.c: Add riscv relocs.
	* targets.c: Add riscv_elf32_vec and riscv_elf64_vec.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenerate.
	* elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id.
	* elfnn-riscv.c: New file.
	* elfxx-riscv.c: New file.
	* elfxx-riscv.h: New file.

binutils* readelf.c (guess_is_rela): Add EM_RISCV.
	(get_machine_name): Likewise.
	(dump_relocations): Add support for riscv relocations.
	(get_machine_flags): Add support for riscv flags.
	(is_32bit_abs_reloc): Add R_RISCV_32.
	(is_64bit_abs_reloc): Add R_RISCV_64.
	(is_none_reloc): Add R_RISCV_NONE.
	* testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv.
	Expect the debug_ranges test to fail.

gas	* Makefile.am: Add riscv files.
	* Makefile.in: Regenerate.
	* NEWS: Mention the support for this architecture.
	* configure.in: Define a default architecture.
	* configure: Regenerate.
	* configure.tgt: Add entries for riscv.
	* doc/as.texinfo: Likewise.
	* testsuite/gas/all/gas.exp: Expect the redef tests to fail.
	* testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail.
	* config/tc-riscv.c: New file.
	* config/tc-riscv.h: New file.
	* doc/c-riscv.texi: New file.
	* testsuite/gas/riscv: New directory.
	* testsuite/gas/riscv/riscv.exp: New file.
	* testsuite/gas/riscv/t_insns.d: New file.
	* testsuite/gas/riscv/t_insns.s: New file.

ld	* Makefile.am: Add riscv files.
	* Makefile.in: Regenerate.
	* NEWS: Mention the support for this target.
	* configure.tgt: Add riscv entries.
	* emulparams/elf32lriscv-defs.sh: New file.
	* emulparams/elf32lriscv.sh: New file.
	* emulparams/elf64lriscv-defs.sh: New file.
	* emulparams/elf64lriscv.sh: New file.
	* emultempl/riscvelf.em: New file.

opcodes	* configure.ac: Add entry for bfd_riscv_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Add support for riscv.
	(disassembler_usage): Likewise.
	* riscv-dis.c: New file.
	* riscv-opc.c: New file.

include	* dis-asm.h: Add prototypes for print_insn_riscv and
	print_riscv_disassembler_options.
	* elf/riscv.h: New file.
	* opcode/riscv-opc.h: New file.
	* opcode/riscv.h: New file.
2016-11-01 16:45:57 +00:00
Andreas Krebbel
82057c771e S/390: Move binary start to 16M.
Turned out that by moving the binary start to 256M I've hit a case with
potentially a lot of aliasing in the branch target buffer between
binaries and shared libs.  So moving on.

Tested on s390x. No regressions.

ld/ChangeLog:

2016-10-10  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* emulparams/elf64_s390.sh: Move binary start to 16M.
	* testsuite/ld-s390/tlsbin_64.dd: Adjust testcases accordingly.
	* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-10-10 17:09:03 +02:00
Ludovic Court?s
249471c08a Add workaround for bash 4.2 scripting problem.
* emulparams/elf32bmipn32-defs.sh: Shift quote of
	"x$EMULATION_NAME" to the left to work around
	<http://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-007>.
2016-10-06 13:49:09 +01:00
Andreas Krebbel
7c4236c350 S/390: Move start of 64 bit binaries from 2GB to 256MB.
ld/ChangeLog:

2016-09-23  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* emulparams/elf64_s390.sh: Change TEXT_START_ADDR to 256MB.
	* testsuite/ld-s390/tlsbin_64.dd: Adjust testcase accordingly.
	* testsuite/ld-s390/tlsbin_64.rd: Likewise.
2016-09-23 11:26:05 +02:00
Roland McGrath
7cfee229f1 Support -pie for arm*-eabi targets.
ld/
	* emulparams/armelf.sh (GENERATE_PIE_SCRIPT): Set to yes.
2016-08-09 12:09:17 -07:00
Nick Clifton
a94d834c9d Fix SH GOT allocation in the presence of linker garbage collection.
PR ld/17739
ld	* emulparams/shelf.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): Define with
	valye 'yes'.
	* emulparams/shelf32.sh: Likewise.
	* emulparams/shelf32.sh: Likewise.
	* emulparams/shelf_nto.sh: Likewise.
	* emulparams/shelf_nto.sh: Likewise.
	* emulparams/shelf_vxworks.sh: Likewise.
	* emulparams/shelf_vxworks.sh: Likewise.
	* emulparams/shlelf32_linux.sh: Likewise.
	* emulparams/shlelf32_linux.sh: Likewise.
	* emulparams/shlelf_linux.sh: Likewise.
	* emulparams/shlelf_linux.sh: Likewise.
	* emulparams/shlelf_nto.sh: Likewise.
	* emulparams/shlelf_nto.sh: Likewise.

bfd	* elf32-sh.c (sh_elf_gc_sweep_hook): Delete.
	(elf_backend_sweep_hook): Delete.
2016-08-02 11:56:55 +01:00
Roland McGrath
3af09e8db3 Support -pie for aarch64*-elf targets.
ld/
	* emulparams/aarch64elf.sh (GENERATE_PIE_SCRIPT): Set to yes.
	* emulparams/aarch64elf32.sh: Likewise.
2016-07-19 10:19:06 -07:00
Claudiu Zissulescu
fa1c017017 [ARC] Fix/improve small data support.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it.  Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.

include/
2016-07-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.

ld/
2016-07-08  Claudiu Zissulescu  <claziss@synopsys.com>

	* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
	* testsuite/ld-arc/sda-relocs.dd: New file.
	* testsuite/ld-arc/sda-relocs.ld: Likewise.
	* testsuite/ld-arc/sda-relocs.rd: Likewise.
	* testsuite/ld-arc/sda-relocs.s: Likewise.
	* testsuite/ld-arc/arc.exp: Add SDA tests.
2016-07-14 10:08:57 +02:00
Kuba Sejdak
a2bea3245e Add support for configuring for the ARM Phoenix target.
bfd	* config.bfd: Add entry for arm-phoenix.

gas	* configuse.tgt: Add entry for arm-phoenix.

ld	* Makefile.am: Add earmelf_phoenix.c.
	* Makefile.in: Regenerate.
	* configure.tgt: Add entry for arm-phoenix.
	* emulparams/armelf_phoenix.sh: New file.
2016-05-23 13:53:07 +01:00
Claudiu Zissulescu
c0913ebfaf [ARC] Emulation and default script template changes.
2016-05-19  Cupertino Miranda  <cmiranda@synopsys.com>

	* emulparams/arcelf.sh: Changed.
	* emulparams/arclinux.sh: Likewise.
	* scripttempl/arclinux.sc: Moved to a more standard implementation
	similar to elf.sc.
2016-05-19 15:06:50 +02:00
H.J. Lu
004b130918 More setting CHECK_RELOCS_AFTER_OPEN_INPUT to yes
* emulparams/elf_iamcu.sh (CHECK_RELOCS_AFTER_OPEN_INPUT): New.
	* emulparams/elf_k1om.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_l1om.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
2016-05-05 08:43:58 -07:00
H.J. Lu
d968975277 Check ELF relocs after opening all input files
Delaying checking ELF relocations until opening all input files so
that symbol information is final when relocations are checked.  This
is only enabled for x86 targets.

bfd/

	* elf-bfd.h (_bfd_elf_link_check_relocs): New.
	* elflink.c (_bfd_elf_link_check_relocs): New function.
	(elf_link_add_object_symbols): Call _bfd_elf_link_check_relocs
	if check_relocs_after_open_input is FALSE.

include/

	* bfdlink.h (bfd_link_info): Add check_relocs_after_open_input.

ld/

	* emulparams/elf32_x86_64.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	New.
	* emulparams/elf_i386.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_i386_be.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_i386_chaos.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_i386_ldso.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_i386_vxworks.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/elf_x86_64.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emulparams/i386nto.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
	Likewise.
	* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse):
	Set check_relocs_after_open_input to TRUE if
	CHECK_RELOCS_AFTER_OPEN_INPUT is yes.
	(gld${EMULATION_NAME}_after_open): Call
	_bfd_elf_link_check_relocs on all inputs if
	check_relocs_after_open_input is TRUE.
2016-04-20 05:26:51 -07:00
Oleg Endo
417a667c4a Adjust default memory size and stack base address for SH simulator.
ld/ChangeLog:
	* sh/interp.c (sim_memory_size): Default init to 30.
	(parse_and_set_memory_size): Adjust upper bound to 31.

sim/ChangeLog:
	* sh/interp.c (sim_memory_size): Default init to 30.
	(parse_and_set_memory_size): Adjust upper bound to 31.
2016-04-09 10:24:00 +09:00
Andrew Burgess
1a295c62e0 ld/arc: Make little endian default choice for linker scripts
When building with --enable-targets=all the target string is not set to
something that matches the pattern arc*-*, and so the script used to
decide if we should build big or little endian linker script currently
exits with an error.

This commit makes little endian linker script be the default, which will
be used when building for all targets, this matches the behaviour from
before I made the endianness switchable, when we only ever built little
endian linker scripts anyway.

ld/ChangeLog:

	* emulparams/arc-endianness.sh: Make little endian default choice.
2016-04-07 16:17:08 +01:00
Andrew Burgess
9a5f28ae28 ld/arc: Fix linker for big-endian arc targets
This aims to bring the linker for big-endian arc targets into line with
the linker for (the default) little endian arc targets.

The bulk of the changes are to extend the target pattern in the test
files from 'arc-*...' to 'arc*-*...' and so match both big and little
endian arc targets.

In the ld/emulparams/ directory the existing scripts checked for a
variable ARC_ENDIAN to switch between big and little endian targets,
however, this variable is never set up.

So, a new script snippet is introduced which sets up ARC_ENDIAN based on
the value of target, this snippet is then included from all of the
existing arc scripts.

The existing big-endian variants of all the scripts, which existed, but
were never used, are deleted in this commit.

ld/ChangeLog:

	* emulparams/arc-endianness.sh: New file.
	* emulparams/arcebelf.sh: Deleted.
	* emulparams/arcebelf_prof.sh: Deleted.
	* emulparams/arceblinux.sh: Deleted.
	* emulparams/arceblinux_prof.sh: Deleted.
	* emulparams/arcelf.sh: Include arc-endinness.sh.
	* emulparams/arcelf_prof.sh: Include arc-endinness.sh.
	* emulparams/arclinux.sh: Include arc-endinness.sh.
	* emulparams/arclinux_prof.sh: Include arc-endinness.sh.
	* emulparams/arcv2elf.sh: Include arc-endinness.sh.
	* emulparams/arcv2elfx.sh: Include arc-endinness.sh.
	* testsuite/ld-elf/compressed1d.d: Update pattern for big and
	little endian arc targets.
	* testsuite/ld-elf/eh-frame-hdr.d: Likewise.
	* testsuite/ld-elf/group1.d: Likewise.
	* testsuite/ld-elf/group3b.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr19162.d: Likewise.
	* testsuite/ld-elf/sec64k.exp: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
2016-04-05 23:08:28 +01:00
H.J. Lu
4c10bbaa09 Add -z noreloc-overflow option to x86-64 ld
Add -z noreloc-overflow command-line option to the x86-64 ELF linker to
disable relocation overflow check.  This can be used to avoid relocation
overflow check if there will be no dynamic relocation overflow at
run-time.

bfd/

	PR ld/19807
	* elf64-x86-64.c (elf_x86_64_relocate_section): Check
	no_reloc_overflow_check to diable R_X86_64_32/R_X86_64_32S
	relocation overflow check.

include/

	PR ld/19807
	* bfdlink.h (bfd_link_info): Add no_reloc_overflow_check.

ld/

	PR ld/19807
	* Makefile.am (ELF_X86_DEPS): Add
	$(srcdir)/emulparams/reloc_overflow.sh.
	* Makefile.in: Regenerated.
	* NEWS: Mention -z noreloc-overflow.
	* ld.texinfo: Document -z noreloc-overflow.
	* emulparams/elf32_x86_64.sh: Source
	${srcdir}/emulparams/reloc_overflow.sh.
	* emulparams/elf_x86_64.sh: Likewise.
	* emulparams/reloc_overflow.sh: New file.
	* testsuite/ld-x86-64/pr19807-1.s: New file.
	* testsuite/ld-x86-64/pr19807-1a.d: Likewise.
	* testsuite/ld-x86-64/pr19807-1b.d: Likewise.
	* testsuite/ld-x86-64/pr19807-2.s: Likewise.
	* testsuite/ld-x86-64/pr19807-2a.d: Likewise.
	* testsuite/ld-x86-64/pr19807-2b.d: Likewise.
	* testsuite/ld-x86-64/pr19807-2c.d: Likewise.
	* testsuite/ld-x86-64/pr19807-2d.d: Likewise.
	* testsuite/ld-x86-64/pr19807-2e.d: Likewise.
	* testsuite/ld-x86-64/x86-64.exp: Run PR ld/19807 tests.
2016-03-15 11:07:54 -07:00
H.J. Lu
aec6b87e0b [x86] Resolve non-PIC undefweak symbols in executable
For i386 and x86-64, non-PIC references to undefined weak symbols are
resolved without dynamic relocation when creating executable.  Resolved
undefined weak symbols are removed from the dynamic symbol table in
executable.  One exception is on i386, we need resolved undefined weak
symbols in the dynamic symbol table in PIE if input relocatable files
contain branchs without PLT so that we can branch to 0 with dynamic
relocation in text section.

This makes behaviors of dynamic executable and position independent
executable predictable with mixed PIC and non-PIC references to undefined
weak symbols.  If all references to undefined weak symbols are PIC,
dynamic relocations against undefined weak symbols will be generated
in executable unless -z nodynamic-undefined-weak is passed to linker.

bfd/

	PR ld/19636
	PR ld/19704
	PR ld/19719
	* elf32-i386.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New.
	(elf_i386_link_hash_entry): Add has_got_reloc and
	has_non_got_reloc.
	(elf_i386_link_hash_table): Add interp.
	(elf_i386_link_hash_newfunc): Initialize has_got_reloc and
	has_non_got_reloc.
	(elf_i386_copy_indirect_symbol): Copy has_got_reloc and
	has_non_got_reloc.
	(elf_i386_check_relocs): Set has_got_reloc and has_non_got_reloc.
	(elf_i386_fixup_symbol): New function.
	(elf_i386_pie_finish_undefweak_symbol): Likewise.
	(elf_i386_allocate_dynrelocs): Don't allocate space for dynamic
	relocations and discard relocations against resolved undefined
	weak symbols in executable.  Don't make resolved undefined weak
	symbols in executable dynamic.  Keep dynamic non-GOT/non-PLT
	relocation against undefined weak symbols in PIE.
	(elf_i386_size_dynamic_sections): Set interp to .interp section.
	(elf_i386_relocate_section): Don't generate dynamic relocations
	against resolved undefined weak symbols in PIE, except for
	R_386_PC32.
	(elf_i386_finish_dynamic_symbol): Keep PLT/GOT entries without
	dynamic PLT/GOT relocations for resolved undefined weak symbols.
	Don't generate dynamic relocation against resolved undefined weak
	symbol in executable.
	(elf_i386_finish_dynamic_sections): Call
	elf_i386_pie_finish_undefweak_symbol on all symbols in PIE.
	(elf_backend_fixup_symbol): New.
	* elf64-x86-64.c (UNDEFINED_WEAK_RESOLVED_TO_ZERO): New.
	(elf_x86_64_link_hash_entry): Add has_got_reloc and
	has_non_got_reloc.
	(elf_x86_64_link_hash_table): Add interp.
	(elf_x86_64_link_hash_newfunc): Initialize has_got_reloc and
	has_non_got_reloc.
	(elf_x86_64_copy_indirect_symbol): Copy has_got_reloc and
	has_non_got_reloc.
	(elf_x86_64_check_relocs): Set has_got_reloc and
	has_non_got_reloc.
	(elf_x86_64_fixup_symbol): New function.
	(elf_x86_64_pie_finish_undefweak_symbol): Likewise.
	(elf_x86_64_allocate_dynrelocs): Don't allocate space for dynamic
	relocations and discard relocations against resolved undefined
	weak symbols in executable.  Don't make resolved undefined weak
	symbols in executable dynamic.
	(elf_x86_64_size_dynamic_sections): Set interp to .interp section.
	(elf_x86_64_relocate_section): Check relocation overflow for
	dynamic relocations against unresolved weak undefined symbols.
	Don't generate dynamic relocations against resolved weak
	undefined symbols in PIE.
	(elf_x86_64_finish_dynamic_symbol): Keep PLT/GOT entries without
	dynamic PLT/GOT relocations for resolved undefined weak symbols.
	Don't generate dynamic relocation against resolved undefined weak
	symbol in executable.
	(elf_x86_64_finish_dynamic_sections): Call
	elf_x86_64_pie_finish_undefweak_symbol on all symbols in PIE.
	(elf_backend_fixup_symbol): New.

include/

	PR ld/19636
	PR ld/19704
	PR ld/19719
	* bfdlink.h (bfd_link_info): Add dynamic_undefined_weak.

ld/

	PR ld/19636
	PR ld/19704
	PR ld/19719
	* Makefile.am (ELF_X86_DEPS): Add dynamic_undefined_weak.sh.
	* Makefile.in: Regenerated.
	* NEWS: Mention -z nodynamic-undefined-weak.
	* ld.texinfo: Document -z nodynamic-undefined-weak.
	* ldmain.c (main): Initialize dynamic_undefined_weak to -1.
	* emulparams/dynamic_undefined_weak.sh: New file.
	* emulparams/elf32_x86_64.sh: Source dynamic_undefined_weak.sh.
	* emulparams/elf_i386.sh: Likewise.
	* emulparams/elf_i386_be.sh: Likewise.
	* emulparams/elf_i386_chaos.sh: Likewise.
	* emulparams/elf_i386_ldso.sh: Likewise.
	* emulparams/elf_i386_vxworks.sh: Likewise.
	* emulparams/elf_iamcu.sh: Likewise.
	* emulparams/elf_k1om.sh: Likewise.
	* emulparams/elf_l1om.sh: Likewise.
	* emulparams/elf_x86_64.sh: Likewise.
	* emulparams/extern_protected_data.sh (PARSE_AND_LIST_OPTIONS):
	Append.
	(PARSE_AND_LIST_ARGS_CASE_Z): Likewise.
	* testsuite/ld-elf/pr19719a.c: New file.
	* testsuite/ld-elf/pr19719b.c: Likewise.
	* testsuite/ld-elf/pr19719c.c: Likewise.
	* testsuite/ld-elf/pr19719d.c: Likewise.
	* testsuite/ld-i386/pr19636-1.s: Likewise.
	* testsuite/ld-i386/pr19636-1a.d: Likewise.
	* testsuite/ld-i386/pr19636-1b.d: Likewise.
	* testsuite/ld-i386/pr19636-1c.d: Likewise.
	* testsuite/ld-i386/pr19636-1d-nacl.d: Likewise.
	* testsuite/ld-i386/pr19636-1d.d: Likewise.
	* testsuite/ld-i386/pr19636-1e.d: Likewise.
	* testsuite/ld-i386/pr19636-1f.d: Likewise.
	* testsuite/ld-i386/pr19636-1g.d: Likewise.
	* testsuite/ld-i386/pr19636-1h.d: Likewise.
	* testsuite/ld-i386/pr19636-1i.d: Likewise.
	* testsuite/ld-i386/pr19636-2.s: Likewise.
	* testsuite/ld-i386/pr19636-2a.d: Likewise.
	* testsuite/ld-i386/pr19636-2b.d: Likewise.
	* testsuite/ld-i386/pr19636-2c-nacl.d: Likewise.
	* testsuite/ld-i386/pr19636-2c.d: Likewise.
	* testsuite/ld-i386/pr19636-2d-nacl.d: Likewise.
	* testsuite/ld-i386/pr19636-2d.d: Likewise.
	* testsuite/ld-i386/pr19636-2e-nacl.d: Likewise.
	* testsuite/ld-i386/pr19636-2e.d: Likewise.
	* testsuite/ld-i386/pr19636-3.s: Likewise.
	* testsuite/ld-i386/pr19636-3a.d: Likewise.
	* testsuite/ld-i386/pr19636-3b.d: Likewise.
	* testsuite/ld-i386/pr19636-3c.d: Likewise.
	* testsuite/ld-i386/pr19636-3d.d: Likewise.
	* testsuite/ld-i386/pr19636-3e.d: Likewise.
	* testsuite/ld-i386/pr19636-3f.d: Likewise.
	* testsuite/ld-i386/pr19636-3g.d: Likewise.
	* testsuite/ld-i386/pr19636-4.s: Likewise.
	* testsuite/ld-i386/pr19636-4a.d: Likewise.
	* testsuite/ld-i386/pr19636-4b.d: Likewise.
	* testsuite/ld-i386/pr19636-4c.d: Likewise.
	* testsuite/ld-i386/pr19636-4d.d: Likewise.
	* testsuite/ld-i386/pr19704.out: Likewise.
	* testsuite/ld-i386/pr19704a.c: Likewise.
	* testsuite/ld-i386/pr19704b.c: Likewise.
	* testsuite/ld-x86-64/pr19636-1.s: Likewise.
	* testsuite/ld-x86-64/pr19636-1a.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1b.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1c.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1d.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1e.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1f.d: Likewise.
	* testsuite/ld-x86-64/pr19636-1g.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2.s: Likewise.
	* testsuite/ld-x86-64/pr19636-2a.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2b.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2c.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2d.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2e.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2f.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2g.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2h.d: Likewise.
	* testsuite/ld-x86-64/pr19636-2i.d: Likewise.
	* testsuite/ld-x86-64/pr19636-3.s: Likewise.
	* testsuite/ld-x86-64/pr19636-3a.d: Likewise.
	* testsuite/ld-x86-64/pr19636-3b.d: Likewise.
	* testsuite/ld-x86-64/pr19636-3c.d: Likewise.
	* testsuite/ld-x86-64/pr19636-3d.d: Likewise.
	* testsuite/ld-x86-64/pr19704.out: Likewise.
	* testsuite/ld-x86-64/pr19704a.c: Likewise.
	* testsuite/ld-x86-64/pr19704b.c: Likewise.
	* testsuite/ld-elf/shared.exp (mix_pic_and_non_pic): New.
	Run mix_pic_and_non_pic.
	* testsuite/ld-i386/i386.exp (undefined_weak): New.
	Run undefined_weak and PR ld/19636 tests.
	* testsuite/ld-x86-64/x86-64.exp: Likewise.
	* testsuite/ld-x86-64/pr13082-3b.d: Updated.
	* testsuite/ld-x86-64/pr13082-4b.d: Likewise.
2016-02-26 04:55:57 -08:00
Nick Clifton
296ebfbb91 Fix the execution of the MSP430 simulator testsuite.
ld	* emulparams/msp430elf.sh (RAM_START): Move to 0x500 - above the
	MSP430 hardware multiply address range.
	* scripttempl/elf32msp430.sc (__romdatastart): Define.
	(__romdatacopysize): Define.
	* scripttempl/elf32msp430_3.sc: Likewise.

tests	* testutils.inc (__pass): Use the LMA addresses of the _passmsg
	symbol.
	(__fail): Likewise.
2016-01-05 16:43:58 +00:00
Alan Modra
6f2750feaf Copyright update for binutils 2016-01-01 23:00:01 +10:30
Ed Schouten
a75cf613fd Add support for AArch64 CloudABI binaries.
ld	* Makefile.am (ALL_64_EMULATION_SOURCES): Add support for
	CloudABI on aarch64. For this target we have to make sure we use
	ELFOSABI_CLOUDABI instead of ELFOSABI_NONE.
	* configure.tgt (targ_emul): Likewise.
	* emulparams/aarch64cloudabi.sh: New file.
	* emulparams/aarch64cloudabib.sh: New file.
	* Makefile.in: Regenerate.

bfd	* config.bfd (targ_defvec): Add support for CloudABI on aarch64.
	For this target we have to make sure we use ELFOSABI_CLOUDABI
	instead of ELFOSABI_NONE.
	* configure.ac (tb): Likewise.
	* elfnn-aarch64.c: Likewise.
	* targets.c (_bfd_target_vector): Likewise.
	* configure: Regenerate.

gas	* config/tc-aarch64.c (elf64_aarch64_target_format): Select the
	cloudabi format if the TARGET_OS is cloudabi.
2015-10-29 13:49:03 +00:00
H.J. Lu
caa65211bb Add "-z call-nop=PADDING" option to ld
The ld linker can transform indirect call to a locally defined function,
foo, via its GOT slot, to either "NOP call foo" or "call foo NOP" where
NOP is a 1-byte NOP padding.  This patch adds a "-z call-nop=PADDING"
option to x86 ld to control 1-byte NOP padding for x86 call instruction.
PADDING is one of prefix-addr, prefix-nop, suffix-nop, prefix-NUMBER or
suffix-NUMBER.

bfd/

	* elf32-i386.c (elf_i386_convert_load): Use call_nop_byte and
	check call_nop_as_suffix for 1-byte NOP padding to pad call.
	* elf64-x86-64.c (elf_x86_64_convert_load): Likewise.

include/

	* bfdlink.h (bfd_link_info): Add call_nop_as_suffix and
	call_nop_byte.

ld/

	* ld/ld.texinfo: Document "-z call-nop=PADDING" option.
	* emulparams/call_nop.sh: New file.
	* emulparams/elf_i386_be.sh: Source
	${srcdir}/emulparams/call_nop.sh.
	* emulparams/elf_i386_chaos.sh: Likewise.
	* emulparams/elf_i386_ldso.sh: Likewise.
	* emulparams/elf_i386_vxworks.sh: Likewise.
	* emulparams/elf_iamcu.sh: Likewise.
	* emulparams/elf_k1om.sh: Likewise.
	* emulparams/elf_l1om.sh: Likewise.
	* emulparams/elf_x86_64.sh: Likewise.
	* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
	link_info.call_nop_byte if $CALL_NOP_BYTE isn't empty.

ld/testsuite/

	* ld-i386/call3.s: New file.
	* ld-i386/call3a.d: Likewise.
	* ld-i386/call3b.d: Likewise.
	* ld-i386/call3c.d: Likewise.
	* ld-i386/call3d.d: Likewise.
	* ld-i386/call3e.d: Likewise.
	* ld-i386/call3f.d: Likewise.
	* ld-i386/call3g.d: Likewise.
	* ld-i386/call3h.d: Likewise.
	* ld-i386/load1-nacl.d: Likewise.
	* ld-x86-64/call1.s: Likewise.
	* ld-x86-64/call1a.d: Likewise.
	* ld-x86-64/call1b.d: Likewise.
	* ld-x86-64/call1c.d: Likewise.
	* ld-x86-64/call1d.d: Likewise.
	* ld-x86-64/call1e.d: Likewise.
	* ld-x86-64/call1f.d: Likewise.
	* ld-x86-64/call1g.d: Likewise.
	* ld-x86-64/call1h.d: Likewise.
	* ld-x86-64/call1i.d: Likewise.
	* ld-x86-64/load1a-nacl.d: Likewise.
	* ld-x86-64/load1b-nacl.d: Likewise.
	* ld-x86-64/load1c-nacl.d: Likewise.
	* ld-x86-64/load1d-nacl.d: Likewise.
2015-10-22 04:56:39 -07:00
Nick Clifton
886a250647 New ARC implementation.
bfd	* archures.c: Remove support for older ARC. Added support for new
	ARC cpus (ARC600, ARC601, ARC700, ARCV2).
	* bfd-in2.h: Likewise.
	* config.bfd: Likewise.
	* cpu-arc.c: Likewise.
	* elf32-arc.c: Totally changed file with a refactored
	inplementation of the ARC port.
	* libbfd.h: Added ARC specific relocation types.
	* reloc.c: Likewise.

gas     * config/tc-arc.c: Revamped file for ARC support.
        * config/tc-arc.h: Likewise.
        * doc/as.texinfo: Add new ARC options.
        * doc/c-arc.texi: Likewise.

ld	* configure.tgt: Added target arc-*-elf* and arc*-*-linux-uclibc*.
	* emulparams/arcebelf_prof.sh: New file
	* emulparams/arcebelf.sh: Likewise.
	* emulparams/arceblinux_prof.sh: Likewise.
	* emulparams/arceblinux.sh: Likewise.
	* emulparams/arcelf_prof.sh: Likewise.
	* emulparams/arcelf.sh: Likewise.
	* emulparams/arclinux_prof.sh: Likewise.
	* emulparams/arclinux.sh: Likewise.
	* emulparams/arcv2elfx.sh: Likewise.
	* emulparams/arcv2elf.sh: Likewise.
	* emultempl/arclinux.em: Likewise.
	* scripttempl/arclinux.sc: Likewise.
	* scripttempl/elfarc.sc: Likewise.
	* scripttempl/elfarcv2.sc: Likewise
	* Makefile.am: Add new ARC emulations.
	* Makefile.in: Regenerate.
	* NEWS: Mention the new feature.

opcodes * arc-dis.c: Revamped file for ARC support
	* arc-dis.h: Likewise.
	* arc-ext.c: Likewise.
	* arc-ext.h: Likewise.
	* arc-opc.c: Likewise.
	* arc-fxi.h: New file.
	* arc-regs.h: Likewise.
	* arc-tbl.h: Likewise.

binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact
	and ARCv2.
	(get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT.
	(guess_is_rela): Likewise.
	(dump_relocations): Likewise.
	(is_32bit_abs_reloc): Likewise.
	(is_16bit_abs_reloc): Likewise.
	(is_none_reloc): Likewise.
	* NEWS: Mention the new feature.

include	* dis-asm.h (arc_get_disassembler): Correct declaration.
	* arc-reloc.def: Macro file with definition of all relocation
	types.
	* arc.h: Changed macros for the newly supported ARC cpus.  Altered
	enum defining the supported relocations.
	* common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added
	macro for EM_ARC_COMPACT2.
        * arc-func.h: New file.
        * arc.h: Likewise.
2015-10-07 14:20:19 +01:00
Rainer Orth
5c383f0262 Solaris PIE support
include/elf:
	* common.h (DF_1_STUB, DF_1_PIE): Define.

	ld:
	* emulparams/solaris2.sh (GENERATE_PIE_SCRIPT): Set to yes.

	* emultempl/elf32.em: Include ldlex.h.
	(gld${EMULATION_NAME}_handle_option) [GENERATE_PIE_SCRIPT]
	<OPTION_PIE>: Set DF_1_PIE.

	binutils:
	* readelf.c (process_dynamic_section): Handle DF_1_STUB, DF_1_PIE.
2015-09-22 11:12:51 +02:00
Nick Clifton
aff1a65ecb Fix the evaluation of RL78 complex relocs, by making immediate values be computed relative to a new absolute symbol.
gas	* config/tc-rl78.c (rl78_abs_sym): New local variable.
	(md_begin): Initialise the new symbol.
	(OPIMM): Define the value to be relative to the new symbol and not
	the absolute section symbol.

ld	* emulparams/elf32rl78.sh (OTHER_SECTIONS): Provide a value for
	the _-rl78_abs__ symbol.

tests	* gas/all/struct.d: Allow for extra symbols in the output.
	* gas/macros/test1.d: Likewise.
	* gas/elf/elf.exp: Add an rl78 machine.
	* gas/elf/sections2e-rl78: New file.

tests	* binutils-all/localize-hidden-1.d: Allow for extra symbols in the
	output.
        * binutils-all/strip-11.d: Skip for the RL78.
2015-07-24 16:44:27 +01:00
Alan Modra
d9d11c361c ALIGN change affects cris scripts
More fallout from a2c59f28.  This one could have been fixed by simply
using ". = ALIGN (ABSOLUTE (.), 2);" but it's nicer to align the
section.

	* emulparams/criself.sh (INIT_ADDR, FINI_ADDR): Define.
	(INIT_START, FINI_START): Don't ALIGN.
	* scriptempl/elf.sc (.init, .fini): Apply INIT_ADDR/FINI_ADDR.
2015-07-20 14:29:37 +09:30
H.J. Lu
c742574f82 Compile-in IAMCU linker scripts
* emulparams/elf_iamcu.sh (COMPILE_IN): New.
2015-06-26 05:41:04 -07:00
H.J. Lu
7e0a81123d Add Intel MCU support to ld
-m elf_iamcu must be passed to i386 linker to generate Intel MCU binary.

ld/

	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf_iamcu.c.
	(eelf_iamcu.c): New.
	* configure.tgt (targ_extra_emuls): Add elf_iamcu if elf_i386 is
	enabled in BFD.
	* Makefile.in: Regenerated.
	* emulparams/elf_iamcu.sh: New file.

ld/testsuite/

	* ld-i386/abs-iamcu.d: New file.
	* ld-i386/dummy.s: Likewise.
	* ld-i386/foo.s: Likewise.
	* ld-i386/iamcu-1.d: Likewise.
	* ld-i386/iamcu-2.d: Likewise.
	* ld-i386/iamcu-3.d: Likewise.
	* ld-i386/start.s: Likewise.
	* ld-i386/i386.exp (iamcu_tests): New.
	Run iamcu_tests.
2015-05-11 11:29:03 -07:00
Nick Clifton
837a17b36c Add support to the MSP430 linker for the automatic placement of code and data into either low or high memory regions.
gas	* config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
	(msp430_make_init_symbols): New function.
	(msp430_section): Call it.
	(msp430_frob_section): Likewise.

ld	* emulparams/msp430elf.sh (TEMPLATE_NAME): Change to msp430.
	* scripttempl/msp430.sc (.text): Add .lower.text and .either.text.
	(.data): Add .lower.data and .either.data.
	(.bss): Add .lower.bss and .either.bss.
	(.rodata): Add .lower.rodata and .either.rodata.
	* emultempl/msp430.em: New file.  Implements a new orphan
	placement algorithm that divides sections between lower and upper
	memory regions.
	* Makefile.am (emsp430elf.c): Depend upon msp430.em.
	*emsp430X.c): Likewise.
	* Makefine.in: Regenerate.
2015-05-05 13:38:00 +01:00
DJ Delorie
08e2f2bbb4 Change msp430 emulation to msp430elf
* Makefile.am (msp430): Rename primary emulation to msp430elf.
(emsp430.c): Rename to emsp430elf.c, update dependencies
(emsp430X.c): Update dependencies.
* Makefile.in: Likewise.
* configure.tgt (msp430-*-*): Rename primary emulation to msp430elf.
* emulparame/msp430.sh: Rename to msp430elf.sh.
* emulparams/msp430X.sh: Update.
2015-04-24 17:05:52 -04:00
Alan Modra
a27e685fa0 Align .TOC. for PowerPC64
This change, with prerequisite 0e5fabeb, provides a toc base aligned
to 256 bytes rather than 8 bytes.  This is necessary for a minor gcc
optimisation, allowing use of d-form instructions to correctly access
toc-relative items larger than 8 bytes.

bfd/
	* elf64-ppc.c (TOC_BASE_ALIGN): Define.
	(ppc64_elf_next_toc_section): Align multi-got toc base.
	(ppc64_elf_set_toc): Likewise initial toc base and .TOC. symbol.
ld/
	* emulparams/elf64ppc.sh (GOT): Align.
ld/testsuite/
	* ld-powerpc/ambiguousv1b.d: Update for aligned .got.
	* ld-powerpc/defsym.d: Likewise.
	* ld-powerpc/elfv2-2exe.d: Likewise.
	* ld-powerpc/elfv2exe.d: Likewise.
	* ld-powerpc/elfv2so.d: Likewise.
	* ld-powerpc/relbrlt.d: Likewise.
	* ld-powerpc/tls.g: Likewise.
	* ld-powerpc/tlsexe.d: Likewise.
	* ld-powerpc/tlsexe.g: Likewise.
	* ld-powerpc/tlsexe.r: Likewise.
	* ld-powerpc/tlsexetoc.d: Likewise.
	* ld-powerpc/tlsexetoc.g: Likewise.
	* ld-powerpc/tlsexetoc.r: Likewise.
	* ld-powerpc/tlsso.d: Likewise.
	* ld-powerpc/tlsso.g: Likewise.
	* ld-powerpc/tlsso.r: Likewise.
	* ld-powerpc/tlstoc.g: Likewise.
	* ld-powerpc/tlstocso.d: Likewise.
	* ld-powerpc/tlstocso.g: Likewise.
	* ld-powerpc/tlstocso.r: Likewise.
	* ld-powerpc/tocopt.d: Likewise.
	* ld-powerpc/tocopt2.d: Likewise.
	* ld-powerpc/tocopt3.d: Likewise.
	* ld-powerpc/tocopt4.d: Likewise.
	* ld-powerpc/tocopt5.d: Likewise.
2015-04-23 09:49:19 +09:30
H.J. Lu
889c2a6796 Add -z noextern-protected-data to ld for ELF/x86
Address of protected data defined in the shared library may be external,
i.e., due to copy relocation.  By default, linker backend checks if
relocations against protected data symbols are valid for building shared
library and issues an error if relocation isn't allowed.  The new option
override linker backend default.  When -z noextern-protected-data is used,
updates on protected data symbols by another module won't be visibile
to the resulting shared library.  This option is specific to ELF/i386
and ELF/x86-64.

bfd/

	PR ld/pr17709
	* elflink.c (_bfd_elf_adjust_dynamic_copy): Check
	info->extern_protected_data when warning copy relocs against
	protected symbols.
	(_bfd_elf_symbol_refs_local_p): Check info->extern_protected_data
	when checking protected non-function symbols.

include/

	PR ld/pr17709
	* bfdlink.h (bfd_link_info): Add extern_protected_data.

ld/

	PR ld/pr17709
	* ld.texinfo: Document "-z noextern-protected-data".
	* ldmain.c (main): Initialize link_info.extern_protected_data
	to -1.
	* lexsup.c (elf_shlib_list_options): Add
	"-z [no]extern-protected-data".
	* emulparams/elf32_x86_64.sh: Source extern_protected_data.sh.
	* emulparams/elf_i386.sh: Likewise.
	* emulparams/elf_i386_be.sh: Likewise.
	* emulparams/elf_i386_chaos.sh: Likewise.
	* emulparams/elf_i386_ldso.sh: Likewise.
	* emulparams/elf_i386_vxworks.sh: Likewise.
	* emulparams/elf_k1om.sh: Likewise.
	* emulparams/elf_l1om.sh: Likewise.
	* emulparams/elf_x86_64.sh: Source extern_protected_data.sh.
	(PARSE_AND_LIST_OPTIONS): Renamed to ...
	(PARSE_AND_LIST_OPTIONS_BNDPLT): This.
	(PARSE_AND_LIST_ARGS_CASE_Z): Renamed to ...
	(PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT): This.
	(PARSE_AND_LIST_OPTIONS): Append $PARSE_AND_LIST_OPTIONS_BNDPLT.
	(PARSE_AND_LIST_ARGS_CASE_Z): Append
	$PARSE_AND_LIST_ARGS_CASE_Z_BNDPLT.
	* emulparams/extern_protected_data.sh: New file.

ld/testsuite/

	PR ld/pr17709
	* ld-i386/i386.exp: Run protected6b.
	* ld-i386/protected6b.d: New file.
	* ld-x86-64/protected6b.d: Likewise.
	* ld-x86-64/x86-64.exp:  Run protected6b.
2015-04-14 04:13:11 -07:00
H.J. Lu
eba27bd781 Remove BNDPLT and add PARSE_AND_LIST_ARGS_CASE_Z
* emulparams/elf_x86_64.sh (BNDPLT): Removed.
	(PARSE_AND_LIST_OPTIONS): New.
	(PARSE_AND_LIST_ARGS_CASE_Z): Likewise.
	* emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Remove
	BNDPLT check.  Handle PARSE_AND_LIST_ARGS_CASE_Z.
	(gld${EMULATION_NAME}_list_options): Remove BNDPLT check.
2015-04-09 07:53:00 -07:00
H.J. Lu
31b94bbb7b Skip empty EMULATION_NAME
* emulparams/elf32bmipn32-defs.sh: Skip empty EMULATION_NAME.
2015-04-08 09:46:50 -07:00
H.J. Lu
c58212eaf9 Add ld_list_options
This patch adds ld_list_options for ELF targets to avoid duplicated
outputs from ld --help.

	* Makefile.am (ELF_CLFAGS): New.
	(AM_CFLAGS): Add $(ELF_CLFAGS).
	* configure.ac (elf_list_options): New.  AC_SUBST.
	(elf_shlib_list_options): Likewise.
	(elf_plt_unwind_list_options): Likewise.
	* lexsup.c (elf_shlib_list_options): New.
	(elf_static_list_options): Likewise.
	(elf_plt_unwind_list_options): Likewise.
	(ld_list_options): Likewise.
	(help): Call ld_list_options.
	* Makefile.in: Regenerated.
	* configure: Likewise.
	* emulparams/plt_unwind.sh (PLT_UNWIND): New.
	(PARSE_AND_LIST_OPTIONS): Removed.
	* emultempl/elf32.em (gld_list_options): New.
	(gld${EMULATION_NAME}_list_options): Define only if BNDPLT or
	PARSE_AND_LIST_OPTIONS is defined.
	(ld_${EMULATION_NAME}_emulation): Replace
	gld${EMULATION_NAME}_list_options with ${gld_list_options.
2015-04-08 04:55:23 -07:00
Andrew Turner
15c7659fd1 Add support for configuring an aarch64-freebsd target.
ld	* Makefile.am: Add FreeBSD aarch64 files.
	* Makefile.in: Regenerate.
	* configure.tgt: Add aarch64-*-freebsd* target triple.
	* emulparams/aarch64fbsd.sh: New file.
	* emulparams/aarch64fbsdb.sh: New file.

bfd	* config.bfd: Add aarch64-*-freebsd* target triple.
2015-04-02 15:07:27 +01:00
Chen Gang
16c1c9d6a6 Prevent multiple definitions for _HEAP_START, _HEAP_MAX, and _STACK_START when performing a relocatable link with a tic6x target.
* emulparams/elf32_tic6x_le.sh: Skip OTHER_BSS_SECTIONS for
	relocating operation.
2015-04-01 11:29:46 +01:00
Ed Schouten
6036f48621 Add support for Nuxi CloudABI on x86-64
bfd/

	* config.bfd (targ_defvec): Set to x86_64_elf64_cloudabi_vec
	for x86_64-*-cloudabi*.
	* configure.ac: Handle x86_64_elf64_cloudabi_vec.
	* configure: Regenerated.
	* elf64-x86-64.c (TARGET_LITTLE_SYM): Support x86_64-*-cloudabi*.
	(TARGET_LITTLE_NAME): Likewise.
	(ELF_OSABI): Likewise.
	(elf64_bed): Likewise.
	* targets.c (x86_64_elf64_cloudabi_vec): New.
	(_bfd_target_vector): Add x86_64_elf64_cloudabi_vec.

gas/

	* configure.tgt (fmt): Set to elf for *-*-cloudabi*.

ld/

	* Makefile.am (ALL_64_EMULATION_SOURCES): Add
	eelf_x86_64_cloudabi.c.
	(eelf_x86_64_cloudabi.c): New.
	* configure.tgt (targ_emul): Set to elf_x86_64_cloudabi for
	x86_64-*-cloudabi*.
	* Makefile.in: Regenerated.
	* emulparams/elf_x86_64_cloudabi.sh: New file.
2015-03-31 08:11:08 -07:00
Nick Clifton
685080f210 Adds support for generating notes in V850 binaries.
bfd	* elf32-v850.c (v850_set_note): New function.  Creates a Renesas
	style note entry.
	(v850_elf_make_note_section): New function.  Creates a note
	section.
	(v850_elf_create_sections): New function.  Create a note section
	if one is not already present.
	(v850_elf_set_note): New function.  Adds a note to a bfd.
	(v850_elf_copy_private_bfd_data): New function.  Copies V850
	notes.
	(v850_elf_merge_notes): New function.  Merges V850 notes.
	(print_v850_note): New function.  Displays a V850 note.
	(v850_elf_print_notes): New function. Displays all notes attached
	to a bfd.
	(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
	(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
	(v850_elf_fake_sections): Set the type of the V850 note section.
	* bfd-in.h (v850_elf_create_sections): Add prototype.
	(v850_elf_set_note): Add prototype.
	* bfd-in2.h: Regenerate.

binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
	flags.
	(get_v850_section_type_name): New function.  Handles V850 special
	sections.
	(get_section_type_name): Add support for V850.
	(get_v850_elf_note_type): New function.  Returns the name of a
	V850 note.
	(print_v850_note): New function.  Prints a V850 note.
	(process_v850_notes): New function.  Prints V850 notes.
	(process_note_sections): Add support for V850.

binutils/testsute
	* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.

gas	* config/tc-v850.c (soft_float): New variable.
	(v850_data_8): New variable.
	(md_show_usage): Add -msoft-float/-mhard-float.
	(md_parse_option): Likewise.
	(md_begin): Set the default value of soft_float.
	(v850_md_end): New function.  Creates a note section.
	* config/tc-v850.h (md_end): Define.
	* doc/c-v850.texi: Document -msoft-float/-mhard-float.

gas/testsuite
	* gas/elf/elf.exp: Add special version of the section2 test for
	the V850.
	* gas/elf/section2.e-v850: New file.

include/elf
	* v850.h (EF_RH850_SIMD): Delete deprecated flag.
	(EF_RH850_CACHE): Likewise.
	(EF_RH850_MMU): Likewise.
	(EF_RH850_DATA_ALIGN8): Likewise.
	(SHT_RENESAS_IOP): Fix typo in name.
	(SHT_RENESAS_INFO): Define.
	(V850_NOTE_SECNAME): Define.
	(SIZEOF_V850_NOTE): Define.
	(V850_NOTE_NAME): Define.
	(enum v850_notes): New enum.
	(NUM_V850_NOTES): Define.

ld/ChangeLog
2015-02-24  Nick Clifton  <nickc@redhat.com>

	* Makefile.am (ev850.c): Add dependency upon
	$(srcdir)/emultempl/v850elf.em.
	(ev850_rh850.c): Likewise.
	* Makefile.in: Regenerate.
	* emultempl/v850elf.em: New file.
	* emulparams/v850.sh (EXTRA_EM_FILE): Define.
	* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
	* scripttempl/v850.sc: Add .note.renesas section.
	* scripttempl/v850_rh850.sc: Likewise.

ld/testsuite
	* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
2015-02-24 17:54:09 +00:00
Yoshinori Sato
5518c738a4 Add support for the h8300-linux target.
ld	* Makefile.am: (ALL_EMULATION_SOURCES): Add new emulations.
	* Makefile.in: Regenerate.
	* configure.tgt: Add h8300-*-linux
	* emulparams/h8300elf_linux.sh: Add new emulation.
	* emulparams/h8300helf_linux.sh: Likewise.
	* emulparams/h8300self_linux.sh: Likewise.
	* emulparams/h8300sxelf_linux.sh: Likewise.

bfd	* config.bfd: Add h8300-*-linux.
	* configure.ac: Add h8300_elf32_linux_vec.
	* configure: Regenerate.
	* elf32-h8300.c: Likewise.
	* targets.c(_bfd_target_vector): Likewise.

gas	* config/tc-h8300.c (line_separater_chars): Add a version for
	h8300-linux that includes a separator.
	(default_mach): New variable.
	(md_main): Use it.
	(md_longopts): Add '--march' option.
	(md_parse_option): Parse the new option.
	* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
	* configure.tgt: Add h8300-*-linux
	* doc/c-h8300.texi: Document --march.
2015-02-23 17:04:53 +00:00
Alan Modra
dbd1e97e32 PowerPC64 changes for xlc
The changes to reorder sections for better relro protection on powerpc64,
3e2b0f31, 23283c1b, and 5ad18f16, run into a problem with xlc.
xlc -qdatalocal puts global variables into .toc, which means that .toc
must be writable.  The simplest way to accomplish this is to edit the
linker script to remove .toc sections from .got on detecting xlc object
files.

bfd/
	* elf64-ppc.h (struct ppc64_elf_params): Add "object_in_toc".
	* elf64-ppc.c (ppc64_elf_add_symbol_hook): Assume that global symbols
	in .toc indicate xlc compiled code that might require a rw .toc.
ld/
	* emulparams/elf64ppc.sh (INITIAL_READWRITE_SECTIONS): Define.
	* emultempl/ppc64elf.em (params): Init new field.
	(ppc_after_open): New function.
	(LDEMUL_AFTER_OPEN): Define.
	* ldlang.c (lang_final): Whitespace fix.
ld/testsuite/
	* ld-powerpc/tocvar.d, * ld-powerpc/tocvar.s: New test.
	* ld-powerpc/tocnovar.d, * ld-powerpc/tocnovar.s: New test.
	* ld-powerpc/powerpc.exp: Run tocvar and tocnovar.
2015-01-28 18:30:54 +10:30
Alan Modra
3f8107ab38 FT32 initial support
FT32 is a new 32-bit RISC core developed by FTDI for embedded applications.

	* configure.ac: Add FT32 support.
	* configure: Regenerate.
bfd/
	* Makefile.am: Add FT32 files.
	* archures.c (enum bfd_architecture): Add bfd_arch_ft32.
	(bfd_mach_ft32): Define.
	(bfd_ft32_arch): Declare.
	(bfd_archures_list): Add bfd_ft32_arch.
	* config.bfd: Handle FT32.
	* configure.ac: Likewise.
	* cpu-ft32.c: New file.
	* elf32-ft32.c: New file.
	* reloc.c (BFD_RELOC_FT32_10, BFD_RELOC_FT32_20, BFD_RELOC_FT32_17,
	BFD_RELOC_FT32_18): Define.
	* targets.c (_bfd_target_vector): Add ft32_elf32_vec.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Regenerate.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* readelf.c: Add FT32 support.
gas/
	* Makefile.am: Add FT32 files.
	* config/tc-ft32.c: New file.
	* config/tc-ft32.h: New file.
	* configure.tgt: Add FT32 support.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
gas/testsuite/
	* gas/ft32/ft32.exp: New file.
	* gas/ft32/insn.d: New file.
	* gas/ft32/insn.s: New file.
include/
	* dis-asm.h (print_insn_ft32): Declare.
include/elf/
	* common.h (EM_FT32): Define.
	* ft32.h: New file.
include/opcode/
	* ft32.h: New file.
ld/
	* Makefile.am: Add FT32 files.
	* configure.tgt: Handle FT32 target.
	* emulparams/elf32ft32.sh: New file.
	* scripttempl/ft32.sc: New file.
	* Makefile.in: Regenerate.
opcodes/
	* Makefile.am: Add FT32 files.
	* configure.ac: Handle FT32.
	* disassemble.c (disassembler): Call print_insn_ft32.
	* ft32-dis.c: New file.
	* ft32-opc.c: New file.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
2015-01-28 16:25:18 +10:30