ISA 2.07 (ie, POWER8) added the rfebb instruction which takes one operand
with the value of either a 0 or 1. It also defines an extended mnemonic
with no operands (ie, "rfebb") that is supposed to be equivalent to "rfebb 1".
I implemented rfebb's lone operand with PPC_OPERAND_OPTIONAL, but the
problem is, optional operands that are ommitted always default to the
value 0, which is wrong in this case. I have added support for allowing
non-zero default values by adding an additional flag PPC_OPERAND_OPTIONAL_VALUE
that specifies that the default operand value to be used is stored in the
SHIFT field of the operand field immediately following this one.
This fixes the rfebb issue. I also fixed the mftb and mfcr instructions
so they use the same mechanism. This allows us to flag invalid uses of
mfcr where we explicitly pass in a zero FXM value, like the use in a2.[sd].
include/opcode/
* ppc.h (PPC_OPERAND_OPTIONAL_VALUE): New.
(ppc_optional_operand_value): New inline function.
opcodes/
* ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
* ppc-opc.c (FXM4): Add non-zero optional value.
(TBR): Likewise.
(SXL): Likewise.
(insert_fxm): Handle new default operand value.
(extract_fxm): Likewise.
(insert_tbr): Likewise.
(extract_tbr): Likewise.
gas/
* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
Allow for optional operands without insert functions.
gas/testsuite/
* gas/ppc/power8.d: Fixup rfebb test results.
* gas/ppc/a2.s: Fix invalid mfcr test.
* gas/ppc/a2.d: Likewise.
Adapt code in remote.c to take into account addressable unit size when
reading/writing memory.
A few variables are renamed and suffixed with _bytes or _units. This
way, it's more obvious if there is any place where we add or compare
values of different kinds (which would be a mistake).
gdb/ChangeLog:
* common/rsp-low.c (needs_escaping): New.
(remote_escape_output): Add unit_size parameter. Refactor to
support multi-byte addressable units. Rename parameters.
* common/rsp-low.h (remote_escape_output): Add unit_size
parameter and rename others. Update doc.
* remote.c (align_for_efficient_write): New.
(remote_write_bytes_aux): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_xfer_partial): Get unit size and use it.
(remote_read_bytes_1): Add unit_size parameter and use it.
Rename some variables. Update doc.
(remote_write_bytes): Same.
(remote_xfer_live_readonly_partial): Same.
(remote_read_bytes): Same.
(remote_flash_write): Update call to remote_write_bytes_aux.
(remote_write_qxfer): Update call to remote_escape_output.
(remote_search_memory): Same.
(remote_hostio_pwrite): Same.
gdb/gdbserver/ChangeLog:
* server.c (write_qxfer_response): Update call to
remote_escape_output.
The value inside the GDBHISTSIZE environment variable, only if valid,
should override setting the history size through one's .gdbinit file.
gdb/testsuite/ChangeLog:
* gdb.base/gdbinit-history.exp: Test the interaction between
setting GDBHISTSIZE and setting the history size via .gdbinit.
PR gas/18541
gas * config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
mode against a nearby symbol.
tests * gas/arm/thumb.s: Add test of ADR against a nearby symbol.
* gas/arm/thumb.d: Update expected output.
* gas/arm/thumb-eabi.d: Likewise.
PR gas/18481
bfd * elf32-arm.c (R_ARM_TLS_LE32): Set the special function to NULL.
gas * config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
in the same case as BFD_RELOC_ARM_TLS_IS32.
tests * gas/arm/tls.s: Add tests of the tpoff pseudo with a local
symbol.
* gas/arm/tls.d: Update expected output.
Since we always include the raw syscall number when tracing, also
including it in the name when it's unknown is redundant. Simplify
the code by using a constant string.
The new helpers for walking the maps tested the wrong value for exiting
the for loop. This caused crashes when looking up entries that were not
in the map.
Some simulators don't handle permanent breakpoints properly and will
sometimes terminate when hitting such a breakpoint instruction or have
unwanted effects.
When a permanent breakpoint is inserted, GDB will not attempt to insert
other breakpoint locations on top of it, leading to the problem described
above.
By not marking permanent breakpoint locations as inserted, we allow the
insertion of breakpoint locations on top of the permanent ones, preventing
the simulators from running into that situation.
gdb/ChangeLog:
2015-06-17 Luis Machado <lgustavo@codesourcery.com>
* breakpoint.c (add_location_to_breakpoint): Don't mark permanent
locations as inserted.
Update and expand comment about permanent locations.
(bp_loc_is_permanent): Don't return 0 for bp_call_dummy.
Move comment to add_location_to_breakpoint.
(update_global_location_list): Don't error out if a permanent
breakpoint is not marked inserted.
Don't error out if a non-permanent breakpoint location is inserted on
top of a permanent breakpoint.
make_breakpoint_permanent is no longer used anywhere and can be
safely removed.
gdb/ChangeLog:
2015-06-17 Luis Machado <lgustavo@codesourcery.com>
* breakpoint.c (make_breakpoint_permanent): Remove unused
function.
* breakpoint.h (make_breakpoint_permanent): Remove declaration.
... by mentioning in the manual that setting GDBHISTSIZE to the empty
string disables truncation, like the NEWS entry does.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Mention that setting
GDBHISTSIZE to the empty string disables history truncation.
When GDB reads a nonsensical value for the GDBHISTSIZE environment
variable, i.e. one that is non-numeric or negative, GDB then sets its
history size to 0. This behavior is annoying and also inconsistent
with the behavior of bash.
This patch makes the behavior of invalid GDBHISTSIZE consistent with how
bash handles HISTSIZE. When we encounter a null or out-of-range
GDBHISTSIZE (outside of [0, INT_MAX]) we now set the history size to
unlimited instead of 0. When we encounter a non-numeric GDBHISTSIZE we
do nothing.
gdb/ChangeLog:
PR gdb/16999
* NEWS: Mention new GDBHISTSIZE behavior.
* top.c (init_history): For null or out-of-range GDBHISTSIZE,
set history size to unlimited. Ignore non-numeric GDBHISTSIZE.
gdb/doc/ChangeLog:
PR gdb/16999
* gdb.texinfo (Command History): Mention new GDBHISTSIZE
behavior.
gdb/testsuite/ChangeLog:
PR gdb/16999
* gdb.base/gdbhistsize-history.exp: New test.
The HISTSIZE environment variable is generally expected to be read by
shells, not by applications. Some distros for example globally export
HISTSIZE in /etc/profile -- with the intention that it only affects
shells -- and by doing so it renders useless GDB's own mechanism for
setting the history size via .gdbinit. Also, annoyances may arise when
HISTSIZE is not interpreted the same way by the shell and by GDB, e.g.
PR gdb/16999. That can always be fixed on a shell-by-shell basis but it
may be impossible to be consistent with the behavior of all shells at
once. Finally it just makes sense to not confound shell environment
variables with application environment variables.
gdb/ChangeLog:
* NEWS: Mention that GDBHISTSIZE is read instead of HISTSIZE.
* top.c (init_history): Read from GDBHISTSIZE instead of
HISTSIZE.
(init_main): Refer to GDBHISTSIZE instead of HISTSIZE.
gdb/doc/ChangeLog:
* gdb.texinfo (Command History): Replace occurrences of HISTSIZE
with GDBHISTSIZE.
gdb/testsuite/ChangeLog:
* gdb.base/gdbinit-history.exp: Replace occurrences of HISTSIZE
with GDBHISTSIZE.
* gdb.base/readline.exp: Likewise.
Many ports have the same sim syscall logic, so add some helpers to handle
all the common details. The arches still have to deal with the unpacking
and packing of the syscall arguments, but the rest of the sim<->callback
glue is now shared.
When tracing, we often want to display the human readable name for the
various syscall/errno values. Rather than make each target duplicate
the lookup, extend the existing maps to include the string directly,
and add helper functions to look up the constants.
While most targets are autogenerated (from libgloss), the bfin/cris
targets have custom maps for the Linux ABI which need to be updated
by hand.
This patch fixes the following tcl error
Running ../../../binutils-gdb/gdb/testsuite/gdb.base/break-interp.exp ...
ERROR: (DejaGnu) proc "else" does not exist.
The error code is NONE
The info on the error is:
invalid command name "else"
while executing
"::tcl_unknown else"
("uplevel" body line 1)
invoked from within
"uplevel 1 ::tcl_unknown $args"
gdb/testsuite:
2015-06-17 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (get_build_id): Move braces and "else" to the same
line.
2015-06-17 Jiong Wang <jiong.wang@arm.com>
ld/testsuite/
* ld-aarch64/aarch64-elf.exp (aarch64_choose_ilp32_emul): New function.
* ld-aarch64/emit-relocs-28.d: Use aarch64_choose_ilp32_emul to choose
emulation mode.
* config/tc-arm.c (is_double_a_single): Make conditional upon the
availablity of a 64-bit type. Use this type for the argument and
mantissa.
(double_to_single): Likewise.
* config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
the constant value, if available. Generate a 64-bit value from a
bignum if supported. Only perform the second optimization for
PR 18500 if the 64-bit type is available.
We still do not handle "set history size unlimited" correctly. In
particular, after writing to the history file, we truncate the history
even if it is unlimited.
This patch makes sure that we do not call history_truncate_file() if the
history is not stifled (i.e. if it's unlimited). This bug causes the
history file to be truncated to zero on exit when one has "set history
size unlimited" in their gdbinit file. Although this code exists in GDB
7.8, the bug is masked by a pre-existing bug that's been only fixed in
GDB 7.9 (PR gdb/17820).
gdb/ChangeLog:
* top.c (gdb_safe_append_history): Do not call
history_truncate_file if the history is not stifled.
gdb/testsuite/ChangeLog:
* gdb.base/gdbinit-history.exp: Add test case to check that
an unlimited history file does not get truncated on exit.
PR gas/18499
gas * config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
to MOV.w or MVN.w for Thumb2.
tests * gas/arm/thumb2_ldr_immediate_armv6.s: New test case.
* gas/arm/thumb2_ldr_immediate_armv6.d: Expected disassembly.
* gas/arm/thumb2_ldr_immediate_armv6t2.s: New test case.
* gas/arm/thumb2_ldr_immediate_armv6t2.d: Expected disassembly.
PR gas/18500
gas * config/tc-arm.c (is_double_a_single): New function.
(double_to_single): New function.
(move_or_literal_pool): Add support for converting VLDR to VMOV.
tests * gas/arm/vfpv2-ldr_immediate.s: New test case.
* gas/arm/vfpv2-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3-ldr_immediate.s: New test case.
* gas/arm/vfpv3-ldr_immediate.d: Expected disassembly.
* gas/arm/vfpv3xd-ldr_immediate.s: New test case.
* gas/arm/vfpv3xd-ldr_immediate.d: Expected disassembly.
Represent new Linux syscalls for s390 and s390x in GDB's syscall info.
Add the syscalls from 344 (finit_module) up to 354 (execveat).
gdb/ChangeLog:
* syscalls/s390-linux.xml: Add syscalls 344 through 354.
* syscalls/s390x-linux.xml: Likewise.
So far the gnu_vector test was limited to "static" aspects of GDB's
vector support, like evaluating vector-valued expressions. This patch
enriches the test and adds checks for GDB's vector ABI support as well.
The new checks particularly verify inferior function calls with vector
arguments and GDB's handling of vector return values.
The test now attempts to compile for the target's "native" architecture,
such that a hardware vector ABI is used if available.
Since GDB has no vector ABI support for x86 and x86_64 targets, most of
the new checks are KFAILed there.
gdb/testsuite/ChangeLog:
* gdb.base/gnu_vector.c: Include stdarg.h and stdio.h.
(VECTOR): New macro. Use it...
(int4, uint4, char4, float4, int2, longlong2, float2, double2):
...for these typedefs.
(int8, char1, int1, double1): New typedefs.
(struct just_int2, struct two_int2): New structures.
(add_some_intvecs, add_many_charvecs, add_various_floatvecs)
(add_structvecs, add_singlevecs): New functions.
(main): Call add_some_intvecs twice.
* gdb.base/gnu_vector.exp: Drop GCC version check; just attempt
the compile and exit upon failure. Try compiling for the "native"
architecture. Test inferior function calls with vector arguments
and vector return value handling with "finish" and "return".
This patch adds the ability to automatically construct a section name
based on the prior section.
When gas is invoked with --sectname-subst, the occurrence of %S in a
section name will be substituted by the name of the current section. For
example:
.macro exception_code
.pushsection %S.exception
[exception code here]
.popsection
.endm
.text
[code]
exception_code
[...]
.section .init
[init code]
exception_code
[...]
The first and second exception_code invocations create the
.text.exception and the .init.exception sections respectively. This is
useful e.g. to discriminate between anciliary sections that are tied to
.init code and can be discarded at run time when initialization is over
vs anciliary sections tied to .text sections that need to stay resident.
* as.c (show_usage): Document --sectname-subst.
(parse_args): Add --sectname-subst.
* as.h (flag_sectname_subst): New.
* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
* doc/as.texinfo: Document it.
In some cases tui_show_frame_info() may get called while the inferior's
terminal settings are still in effect. But when we call this function
we absolutely need to have our terminal settings in effect because the
function is responsible for redrawing TUI's windows following a change
in the selected frame or a change in the PC. If our terminal settings
are not in effect, the screen does not get redrawn properly, causing
temporary display artifacts (which can be fixed via ^L).
This scenario happens most prominently when stepping through a program
in TUI while a watchpoint is in effect.
Here is an example backtrace for when tui_show_frame_info() gets called
while target_terminal_is_inferior() == 1:
#1 0x00000000004988ee in tui_selected_frame_level_changed_hook (level=0)
#2 0x0000000000617b99 in select_frame (fi=0x18c9820)
#3 0x0000000000617c3f in get_selected_frame (message=message@entry=0x0)
#4 0x00000000004ce534 in update_watchpoint (b=b@entry=0x2d9a760,
reparse=reparse@entry=0)
#5 0x00000000004d625e in insert_breakpoints ()
#6 0x0000000000531cfe in keep_going (ecs=ecs@entry=0x7ffea7884ac0)
#7 0x00000000005326d7 in process_event_stop_test (ecs=ecs@entry=0x7ffea7884ac0)
#8 0x000000000053596e in handle_inferior_event_1 (ecs=0x7ffea7884ac0)
The fix is simple: call target_terminal_ours_for_output() before calling
tui_show_frame_info() in TUI's frame-changed hook, making sure to
restore the original terminal settings afterwards.
gdb/ChangeLog:
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Call
target_terminal_ours_for_output() before calling
tui_show_frame_info(), and restore the original terminal
settings afterwards.
GDB trunk fails to compile on Raspbian GNU/Linux 7 because
PTRACE_GETREGSET and PTRACE_SETREGSET are not defined in sys/ptrace.h.
gcc -g -O2 -I. -I. -I./common -I./config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I./../include/opcode -I./../opcodes/.. -I./../readline/.. -I./../zlib -I../bfd -I./../bfd -I./../include -I../libdecnumber -I./../libdecnumber -I./gnulib/import -Ibuild-gnulib/import -DTUI=1 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral -Werror -c -o arm-linux-nat.o -MT arm-linux-nat.o -MMD -MP -MF .deps/arm-linux-nat.Tpo arm-linux-nat.c
arm-linux-nat.c: In function 'fetch_fpregister':
arm-linux-nat.c:103:21: error: 'PTRACE_GETREGSET' undeclared (first use in this function)
arm-linux-nat.c:103:21: note: each undeclared identifier is reported only once for each function it appears in
arm-linux-nat.c: In function 'fetch_fpregs':
arm-linux-nat.c:144:21: error: 'PTRACE_GETREGSET' undeclared (first use in this function)
arm-linux-nat.c: In function 'store_fpregister':
arm-linux-nat.c:184:21: error: 'PTRACE_GETREGSET' undeclared (first use in this function)
arm-linux-nat.c:211:21: error: 'PTRACE_SETREGSET' undeclared (first use in this function)
...
This patch includes the gdb header file nat/linux-ptrace.h, which provides
fallback definitions.
2015-06-16 Martin Simmons <martin@lispworks.com> (tiny patch)
* arm-linux-nat.c: Include nat/linux-ptrace.h.
As a user of the target memory read/write interface, the MI code must
adjust its memory allocations to take into account the addressable memory
unitsize of the target.
gdb/ChangeLog:
mi/mi-main.c (mi_cmd_data_read_memory_bytes): Consider byte
size.
(mi_cmd_data_write_memory_bytes): Same.
New in v3:
* Change RSP documentation as well. The m, M and X packets now use
lengths in addressable memory units.
New in v2:
* Change wording: use byte for 8-bits chunks and addressable memory unit
for the unit of data associated to a single address.
* Introduce definition of addressable memory unit in the Memory
section.
This patch modifies the manual to clarify the MI, RSP and Python APIs in
regard to reading/writing memory on architectures with addressable
memory unit that are not 8 bits.
Care is taken to use the word "addressable memory unit" or "memory unit"
when referring to one piece of the smallest addressable size on the
current architecture and the word "byte" when referring to an 8-bits
data piece.
For MI, -data-{read,write}-memory are not modified, since they are
deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Data Manipulation): Clarify usage of
bytes and memory units for -data-{read,write}-memory-bytes.
(Packets): Same for m, M and X packets.
* python.texi (Inferiors In Python): Same for read_memory and
write_memory.
Bit mask ints are better to make enums as GDB already has support to
automatically decode them:
before this patch:
(gdb) p filterflags
$1 = 51
(gdb) p/x filterflags
$2 = 0x33
after this patch:
(gdb) p filterflags
$1 = (COREFILTER_ANON_PRIVATE | COREFILTER_ANON_SHARED | COREFILTER_ELF_HEADERS | COREFILTER_HUGETLB_PRIVATE)
gdb/ChangeLog
2015-06-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* linux-tdep.c (enum filterflags): Make it from anonymous enum.
(dump_mapping_p): Use it for parameter filterflags.
(linux_find_memory_regions_full): Use it for variable filterflags.
This patch fixes a bug that aarch64-linux.xml isn't copied to the
build tree, so that some tests catch-syscall.exp fail.
gdb:
2015-06-15 Yao Qi <yao.qi@linaro.org>
* data-directory/Makefile.in (SYSCALLS_FILES): Add aarch64-linux.xml.
This promotes BFD's struct elf_build_id to the generic struct bfd_build_id,
populated when an ELF or PE BFD is read.
gdb is updated to use that, and to use the build-id to find symbols for PE files
also.
There is currently no generic way to extract the build-id from an object file,
perhaps an option to objdump to do this might make sense?
On x86_64-pc-cygwin, gdb's sepdebug.exp changes:
-# of unsupported tests 1
+# of expected passes 90
I don't seem to get consistent testsuite runs on i686-linux-gnu, but there
don't appear to be any regressions.
bfd/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* elf-bfd.h : Remove struct elf_build_id.
* bfd.c : Add struct bfd_build_id.
* bfd-in2.h: Regenerate.
* elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id.
* libpei.h: Add protoype and macros for
bfd_XXi_slurp_codeview_record.
* peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public
* peicode.h (pe_bfd_read_buildid): Add.
(pe_bfd_object_p): Use pe_bfd_read_buildid().
gdb/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* build-id.c: Don't include elf-bfd.h.
(build_id_bfd_get): Use bfd_build_id.
(build_id_verify): Ditto.
* build-id.h: Ditto.
(find_separate_debug_file_by_buildid): Ditto.
* python/py-objfile.c: Don't include elf-bfd.h.
(objfpy_get_build_id) Use bfd_build_id.
(objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto.
* coffread.c: Include build-id.h.
(coff_symfile_read): Try find_separate_debug_file_by_buildid.
gdb/doc/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.texinfo (Separate Debug Files): Document that PE is also
supported.
gdb/testsuite/ChangeLog:
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Replace __COPY_CONTEXT_SIZE conditional with __CYGWIN__
__COPY_CONTEXT_SIZE was added to Cygwin's headers in 2006.
Versions of Cygwin which don't define __COPY_CONTEXT_SIZE are long obsolete.
Also see the thread starting at
https://sourceware.org/ml/gdb-patches/2015-03/msg00989.html for some discussion
Note that __COPY_CONTEXT_SIZE should just be sizeof(CONTEXT) (which is a
platform constant), but isn't due to historical mistakes in Cygwin headers.
gdb/ChangeLog:
2015-06-03 Jon Turney <jon.turney@dronecode.org.uk>
* windows-nat.c (do_windows_fetch_inferior_registers)
(handle_output_debug_string): Replace __COPY_CONTEXT_SIZE
conditional with __CYGWIN__.
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
